LU-13417 test: use mkdir_on_mdt0() in misc tests

Replace mkdir with mkdir_on_mdt0() if directory needs to be created
on MDT0 in following tests:
* conf-sanity
* lustre-rsync-test
* ost-pools
* replay-ost-single
* replay-single
* replay-vbr
* sanity-hsm
* sanity-pcc
* sanity-quota
* sanity-sec

Test-Parameters: trivial mdscount=2 mdtcount=4 testlist=conf-sanity,lustre-rsync-test,ost-pools,replay-ost-single,replay-single,replay-vbr,sanity-hsm,sanity-pcc,sanity-quota,sanity-sec
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I96369f25982558a1dac7f4f7fe80a95bc1c0207d
Reviewed-on: https://review.whamcloud.com/43491
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>

diff --git a/lustre/tests/conf-sanity.sh b/lustre/tests/conf-sanity.sh
index 19eae10..fdc7e31 100644 (file)
--- a/lustre/tests/conf-sanity.sh
+++ b/lustre/tests/conf-sanity.sh
@@ -3265,7 +3265,7 @@ test_43a() {
        echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
        chmod go-rw $DIR/$tfile-rootfile  || error "chmod 2 faield"
 
-       mkdir $DIR/$tdir-rootdir || error "mkdir failed"
+       mkdir_on_mdt0 $DIR/$tdir-rootdir || error "mkdir failed"
        chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
        touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
 
@@ -3933,7 +3933,7 @@ test_50i() {
        start_ost2 || error "Unable to start OST2"
        mount_client $MOUNT || error "client start failed"
 
-       mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+       mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
 
        if [[ $PERM_CMD == *"set_param -P"* ]]; then
                $PERM_CMD mdc.${FSNAME}-MDT0001-mdc-*.active=0 &&

diff --git a/lustre/tests/lustre-rsync-test.sh b/lustre/tests/lustre-rsync-test.sh
index 8888469..b16979e 100644 (file)
--- a/lustre/tests/lustre-rsync-test.sh
+++ b/lustre/tests/lustre-rsync-test.sh
@@ -67,7 +67,8 @@ init_src() {
        rm -rf $TGT2/$tdir $TGT2/d*.lustre_rsync-test 2> /dev/null
        rm -rf ${DIR}/$tdir $DIR/d*.lustre_rsync-test ${DIR}/tgt 2> /dev/null
        rm -f $LREPL_LOG
-       mkdir -p ${DIR}/$tdir || error "Failed to create target: " $DIR/$tdir
+
+       mkdir_on_mdt0 $DIR/$tdir || error "Failed to create target: " $DIR/$tdir
        mkdir -p ${TGT}/$tdir || error "Failed to create target: " $TGT/$tdir
        mkdir -p ${TGT2}/$tdir || error "Failed to create target: " $TGT2/$tdir
 }
@@ -229,7 +230,7 @@ test_1a() { # LU-5005
        init_changelog
 
        # Directory create
-       mkdir $DIR/root-dir
+       mkdir_on_mdt0 $DIR/root-dir
 
        # File create
        touch $DIR/root-file
@@ -240,7 +241,7 @@ test_1a() { # LU-5005
 
        # File and directory delete
        touch $DIR/root-file4
-       mkdir $DIR/root-dir1
+       mkdir_on_mdt0 $DIR/root-dir1
        rm $DIR/root-file4
        rm -rf $DIR/root-dir1
 

diff --git a/lustre/tests/ost-pools.sh b/lustre/tests/ost-pools.sh
index 9a42af5..b59e153 100755 (executable)
--- a/lustre/tests/ost-pools.sh
+++ b/lustre/tests/ost-pools.sh
@@ -1452,7 +1452,7 @@ run_test 24 "Independence of pool from other setstripe parameters"
 test_25() {
        local POOL_ROOT=${POOL_ROOT:-$DIR/$tdir}
 
-       mkdir -p $POOL_ROOT
+       mkdir_on_mdt0 $POOL_ROOT
 
        for i in $(seq 10); do
                create_pool_nofail $POOL$i

diff --git a/lustre/tests/replay-ost-single.sh b/lustre/tests/replay-ost-single.sh
index 6584d7a..924c390 100755 (executable)
--- a/lustre/tests/replay-ost-single.sh
+++ b/lustre/tests/replay-ost-single.sh
@@ -29,7 +29,7 @@ assert_DIR
 rm -rf $DIR/[df][0-9]*
 
 TDIR=$DIR/d0.${TESTSUITE}
-mkdir -p $TDIR
+mkdir_on_mdt0 $TDIR
 $LFS setstripe $TDIR -i 0 -c 1
 $LFS getstripe $TDIR
 

diff --git a/lustre/tests/replay-single.sh b/lustre/tests/replay-single.sh
index 3f8cdb8..5f61353 100755 (executable)
--- a/lustre/tests/replay-single.sh
+++ b/lustre/tests/replay-single.sh
@@ -1211,8 +1211,8 @@ test_53a() {
                { skip "Need MDC with 'multi_mod_rpcs' feature"; return 0; }
 
        cancel_lru_locks mdc    # cleanup locks from former test cases
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
        # give multiop a change to open
@@ -1244,8 +1244,8 @@ run_test 53a "|X| close request while two MDC requests in flight"
 test_53b() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop_bg_pause $DIR/${tdir}-1/f O_c ||
                error "multiop_bg_pause $DIR/${tdir}-1/f failed"
        close_pid=$!
@@ -1278,8 +1278,8 @@ run_test 53b "|X| open request while two MDC requests in flight"
 test_53c() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
 
@@ -1320,8 +1320,8 @@ test_53d() {
 
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
        # give multiop a chance to open
@@ -1350,8 +1350,8 @@ run_test 53d "close reply while two MDC requests in flight"
 test_53e() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
 
@@ -1383,8 +1383,8 @@ run_test 53e "|X| open reply while two MDC requests in flight"
 test_53f() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
 
@@ -1421,8 +1421,8 @@ run_test 53f "|X| open reply and close reply while two MDC requests in flight"
 test_53g() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
 
@@ -1459,8 +1459,8 @@ run_test 53g "|X| drop open reply and close request while close and open are bot
 test_53h() {
        cancel_lru_locks mdc    # cleanup locks from former test cases
 
-       mkdir $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
-       mkdir $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-1 || error "mkdir $DIR/${tdir}-1 failed"
+       mkdir_on_mdt0 $DIR/${tdir}-2 || error "mkdir $DIR/${tdir}-2 failed"
        multiop $DIR/${tdir}-1/f O_c &
        close_pid=$!
 
@@ -4168,6 +4168,7 @@ test_111g() {
 run_test 111g "DNE: unlink striped dir, fail MDT1/MDT2"
 
 test_112_rename_prepare() {
+       mkdir_on_mdt0 $DIR/$tdir
        mkdir -p $DIR/$tdir/src_dir
        $LFS mkdir -i 1 $DIR/$tdir/src_dir/src_child ||
                error "create remote source failed"
@@ -4571,7 +4572,7 @@ test_116a() {
                return 0
        local fail_index=0
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        replay_barrier mds1
 
        # OBD_FAIL_SPLIT_UPDATE_REC       0x1702
@@ -4596,7 +4597,7 @@ test_116b() {
                return 0
        local fail_index=0
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        replay_barrier mds2
 
        # OBD_FAIL_SPLIT_UPDATE_REC       0x1702
@@ -4732,7 +4733,7 @@ test_120() {
                skip "Do not support large update log before 2.7.64" &&
                return 0
 
-       mkdir $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        replay_barrier_nosync mds1
        for ((i = 0; i < 20; i++)); do
                mkdir $DIR/$tdir/dir-$i || {

diff --git a/lustre/tests/replay-vbr.sh b/lustre/tests/replay-vbr.sh
index 1994aaa..7955f4c 100755 (executable)
--- a/lustre/tests/replay-vbr.sh
+++ b/lustre/tests/replay-vbr.sh
@@ -114,7 +114,7 @@ test_1b() { # former test_0b
 
     do_facet $SINGLEMDS "$LCTL set_param mdd.${!var}.sync_permission=0"
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
-    do_node $CLIENT1 mkdir -p -m 755 $MOUNT/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 777 $MOUNT2/$tdir
@@ -212,7 +212,7 @@ test_2b() { # former test_0e
     do_facet $SINGLEMDS "$LCTL set_param mdd.${!var}.sync_permission=0"
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
-    do_node $CLIENT1 mkdir -p -m 755 $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 777 $MOUNT2/$tdir
@@ -260,7 +260,7 @@ test_3b() { # former test_0g
     do_facet $SINGLEMDS "$LCTL set_param mdd.${!var}.sync_permission=0"
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
-    do_node $CLIENT1 mkdir -p -m 755 $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
     do_node $CLIENT1 mcreate $DIR/$tdir/$tfile
 
     replay_barrier $SINGLEMDS
@@ -530,7 +530,7 @@ test_5a() { # former test_0s
        local tp_post
 
        do_node $CLIENT1 mcreate $DIR/$tfile
-       do_node $CLIENT1 mkdir -p $DIR/$tdir
+       do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $DIR/$tdir
        pre=$(chk_get_version $CLIENT1 $DIR/$tfile)
        tp_pre=$(chk_get_version $CLIENT1 $DIR/$tdir)
        do_node $CLIENT1 link $DIR/$tfile $DIR/$tdir/$tfile
@@ -554,7 +554,7 @@ test_5b() { # former test_0t
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
     do_node $CLIENT1 mcreate $DIR/$tfile
-    do_node $CLIENT1 mkdir -p -m 755 $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 777 $MOUNT2/$tdir
@@ -577,7 +577,7 @@ test_5c() { # former test_0u
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
     do_node $CLIENT1 openfile -f O_RDWR:O_CREAT -m 0644 $DIR/$tfile
-    do_node $CLIENT1 mkdir -p $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 666 $MOUNT2/$tfile
@@ -599,7 +599,7 @@ test_6a() { # former test_0v
        local tp_post
 
        do_node $CLIENT1 mcreate $DIR/$tfile
-       do_node $CLIENT1 mkdir -p $DIR/$tdir
+       do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
        sp_pre=$(chk_get_version $CLIENT1 $DIR)
        tp_pre=$(chk_get_version $CLIENT1 $DIR/$tdir)
        do_node $CLIENT1 mv $DIR/$tfile $DIR/$tdir/$tfile
@@ -638,7 +638,7 @@ test_6c() { # former test_0x
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
     do_node $CLIENT1 mcreate $DIR/$tfile
-    do_node $CLIENT1 mkdir -p -m 755 $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 777 $MOUNT2
@@ -661,7 +661,7 @@ test_6d() { # former test_0y
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
     do_node $CLIENT1 mcreate $DIR/$tfile
-    do_node $CLIENT1 mkdir -p -m 755 $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
 
     replay_barrier $SINGLEMDS
     do_node $CLIENT2 chmod 777 $MOUNT2/$tdir
@@ -692,7 +692,7 @@ test_7_cycle() {
     do_facet $SINGLEMDS "$LCTL set_param mdd.${!var}.sync_permission=0"
     do_facet $SINGLEMDS "$LCTL set_param mdt.${!var}.commit_on_sharing=0"
 
-    do_node $CLIENT1 mkdir -p $DIR/$tdir
+    do_node $CLIENT1 $LFS mkdir -i 0 -c 1 $MOUNT/$tdir
     replay_barrier $SINGLEMDS
     # first operation
     echo "$cname first: $first"

diff --git a/lustre/tests/sanity-hsm.sh b/lustre/tests/sanity-hsm.sh
index f8d9bb1..0394610 100755 (executable)
--- a/lustre/tests/sanity-hsm.sh
+++ b/lustre/tests/sanity-hsm.sh
@@ -558,6 +558,8 @@ test_1A() { # was test_1
 run_test 1A "lfs hsm flags root/non-root access"
 
 test_1a() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
 
@@ -602,7 +604,7 @@ test_1bde_base() {
 }
 
 test_1b() {
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        $LFS setstripe -E 1M -S 1M -E 64M -c 2 -E -1 -c 4 $DIR/$tdir ||
                error "failed to set default stripe"
        local f=$DIR/$tdir/$tfile
@@ -675,7 +677,7 @@ test_1d() {
        [ $MDS1_VERSION -lt $(version_code 2.10.59) ] &&
                skip "need MDS version at least 2.10.59"
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        $LFS setstripe -E 1M -L mdt -E -1 -c 2 $DIR/$tdir ||
                error "failed to set default stripe"
        local f=$DIR/$tdir/$tfile
@@ -688,7 +690,7 @@ test_1e() {
        [ "$MDS1_VERSION" -lt $(version_code $SEL_VER) ] &&
                skip "skipped for lustre < $SEL_VER"
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        $LFS setstripe -E 1G -z 64M -E 10G -z 512M -E -1 -z 1G $DIR/$tdir ||
                error "failed to set default stripe"
        local comp_file=$DIR/$tdir/$tfile
@@ -726,6 +728,7 @@ run_test 1e "Archive, Release and Restore SEL file"
 test_2() {
        local f=$DIR/$tdir/$tfile
 
+       mkdir_on_mdt0 $DIR/$tdir
        create_empty_file "$f"
        # New files are not dirty
        check_hsm_flags $f "0x00000000"
@@ -752,7 +755,7 @@ test_2() {
 run_test 2 "Check file dirtyness when doing setattr"
 
 test_3() {
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        f=$DIR/$tdir/$tfile
 
        # New files are not dirty
@@ -820,7 +823,7 @@ test_8() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        $LFS hsm_archive $f
@@ -840,7 +843,8 @@ test_9A() { # was test_9
        local uuid=$(get_agent_uuid $(facet_active_host $SINGLEAGT))
        check_agent_registered $uuid
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        $LFS hsm_archive --archive $archive_id $f
@@ -862,6 +866,8 @@ test_9a() {
                copytool setup --facet agt$n
        done
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        # archive files
        for n in $(seq $AGTCOUNT); do
                file=$DIR/$tdir/$tfile.$n
@@ -878,6 +884,7 @@ test_10a() {
        # test needs a running copytool
        copytool setup
 
+       mkdir_on_mdt0 $DIR/$tdir
        mkdir -p $DIR/$tdir/d1
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
@@ -906,7 +913,7 @@ test_10b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
        $LFS hsm_archive $f || error "archive request failed"
@@ -936,7 +943,7 @@ test_10d() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
        $LFS hsm_archive $f || error "cannot archive $f"
@@ -950,7 +957,7 @@ test_10d() {
 run_test 10d "Archive a file on the default archive id"
 
 test_11a() {
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/hosts $tdir/$tfile
        local f=$DIR/$tdir/$tfile
 
@@ -979,7 +986,7 @@ test_11b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
        $LFS hsm_archive -a $HSM_ARCHIVE_NUMBER $f ||
@@ -1013,7 +1020,7 @@ test_12a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/hosts $tdir/$tfile
 
        local f=$DIR/$tdir/$tfile
@@ -1039,7 +1046,7 @@ test_12b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/hosts $tdir/$tfile
 
        local f=$DIR/$tdir/$tfile
@@ -1065,7 +1072,7 @@ test_12c() {
        copytool setup
 
        local f=$DIR/$tdir/$tfile
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        $LFS setstripe -c 2 "$f"
        local fid=$(create_file "$f" 1M 5)
 
@@ -1085,7 +1092,7 @@ test_12d() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
@@ -1109,7 +1116,7 @@ test_12e() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
        $LFS hsm_archive $f || error "archive request failed"
@@ -1129,7 +1136,7 @@ test_12f() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1152,7 +1159,7 @@ test_12g() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1176,7 +1183,7 @@ test_12h() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1198,7 +1205,7 @@ test_12m() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        $LFS hsm_archive $f || error "archive of $f failed"
@@ -1233,7 +1240,7 @@ test_12o() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1282,7 +1289,7 @@ test_12p() {
        # test needs a running copytool
        copytool setup
 
-       mkdir $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1307,6 +1314,8 @@ test_12q() {
        # test needs a running copytool
        copytool setup -m "$MOUNT3"
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local f2=$DIR2/$tdir/$tfile
        local fid=$(create_small_file $f)
@@ -1359,7 +1368,7 @@ test_12r() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/hosts $f)
 
@@ -1411,6 +1420,8 @@ test_14() {
        # test needs a running copytool
        copytool setup
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        # archive a file
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
@@ -1439,6 +1450,8 @@ test_15() {
        # test needs a running copytool
        copytool setup
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        # archive files
        local f=$DIR/$tdir/$tfile
        local count=5
@@ -1491,7 +1504,7 @@ test_16() {
        local goal=20
        dd if=/dev/zero of=$ref bs=1M count=20
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file $ref $f)
        rm $ref
@@ -1537,6 +1550,7 @@ run_test 20 "Release is not permitted"
 test_21() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/test_release
 
@@ -1603,6 +1617,7 @@ run_test 21 "Simple release tests"
 test_22() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/test_release
        local swap=$DIR/$tdir/test_swap
@@ -1628,6 +1643,7 @@ run_test 22 "Could not swap a release file"
 test_23() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/test_mtime
 
@@ -1664,6 +1680,7 @@ test_24a() {
 
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        fid=$(create_small_file $file)
 
@@ -1766,6 +1783,7 @@ test_24b() {
 
        # Test needs a running copytool.
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        # Check that root can do HSM actions on a regular user's file.
        fid=$(create_small_file $file)
@@ -1811,8 +1829,7 @@ test_24c() {
 
        # test needs a running copytool
        copytool setup
-
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        # Save the default masks and check that cleanup_24c will
        # restore the request masks correctly.
@@ -1874,6 +1891,8 @@ test_24d() {
        local fid1
        local fid2
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        fid1=$(create_small_file $file1)
 
        echo $fid1
@@ -1917,6 +1936,7 @@ run_test 24d "check that read-only mounts are respected"
 
 test_24e() {
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid
@@ -1936,6 +1956,7 @@ run_test 24e "tar succeeds on HSM released files" # LU-6213
 test_24f() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        mkdir -p $DIR/$tdir/d1
        local f=$DIR/$tdir/$tfile
@@ -1968,7 +1989,7 @@ test_24g() {
 
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        chmod ugo+rwx $DIR/$tdir
 
        echo "Please listen carefully as our options have changed." | tee $file
@@ -2009,7 +2030,7 @@ test_25b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
@@ -2030,6 +2051,7 @@ run_test 25b "Restore lost file (HS_LOST flag) after release"\
 test_26A() { # was test_26
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -2050,8 +2072,8 @@ test_26a() {
 
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
-       mkdir -p $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
 
@@ -2100,8 +2122,8 @@ run_test 26a "Remove Archive On Last Unlink (RAoLU) policy"
 test_26b() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
-       mkdir -p $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
 
@@ -2132,8 +2154,8 @@ run_test 26b "RAoLU policy when CDT off"
 test_26c() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
-       mkdir -p $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
 
@@ -2179,8 +2201,8 @@ run_test 26c "RAoLU effective when file closed"
 test_26d() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
-       mkdir -p $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
 
@@ -2232,6 +2254,7 @@ run_test 27a "Remove the archive of an imported file (Operation not permitted)"
 test_27b() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -2249,6 +2272,7 @@ run_test 27b "Remove the archive of a relased file (Operation not permitted)"
 test_28() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -2288,6 +2312,7 @@ run_test 29a "Tests --mntpath and --archive options"
 test_29b() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
@@ -2305,6 +2330,7 @@ run_test 29b "Archive/delete/remove by FID from the archive."
 test_29c() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local fid1=$(create_small_file $DIR/$tdir/$tfile-1)
        local fid2=$(create_small_file $DIR/$tdir/$tfile-2)
@@ -2342,6 +2368,8 @@ test_29d() {
                copytool setup -f agt$n -a $n
        done
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        # archive files
        file=$DIR/$tdir/$tfile
        fid=$(create_small_file $file)
@@ -2429,7 +2457,7 @@ test_30b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/true
        local fid=$(copy_file /bin/true $f)
        chmod 755 $f
@@ -2457,7 +2485,7 @@ test_30c() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/SLEEP
        local slp_sum1=$(md5sum /bin/sleep)
        local fid=$(copy_file /bin/sleep $f)
@@ -2525,6 +2553,7 @@ restore_and_check_size() {
 test_31a() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        create_archive_file $tdir/$tfile
        local f=$DIR/$tdir/$tfile
@@ -2543,6 +2572,7 @@ run_test 31a "Import a large file and check size during restore"
 test_31b() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1MB 39)
@@ -2561,6 +2591,7 @@ run_test 31b "Restore a large unaligned file and check size during restore"
 test_31c() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1M 39)
@@ -2578,6 +2609,8 @@ run_test 31c "Restore a large aligned file and check size during restore"
 
 test_33() {
        local f=$DIR/$tdir/$tfile
+
+       mkdir_on_mdt0 $DIR/$tdir
        local fid=$(create_empty_file "$f")
 
        copytool setup
@@ -2607,6 +2640,7 @@ run_test 33 "Kill a restore waiting process"
 test_34() {
        # test needs a running copytool
        copytool setup -b 1
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -2641,6 +2675,7 @@ run_test 34 "Remove file during restore"
 test_35() {
        # test needs a running copytool
        copytool setup -b 1
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local f1=$DIR/$tdir/$tfile-1
@@ -2677,6 +2712,7 @@ run_test 35 "Overwrite file during restore"
 test_36() {
        # test needs a running copytool
        copytool setup -b 1
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -2709,6 +2745,7 @@ run_test 36 "Move file during restore"
 test_37() {
        # LU-5683: check that an archived dirty file can be rearchived.
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid
@@ -2788,7 +2825,7 @@ test_52() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
 
@@ -2813,7 +2850,7 @@ test_53() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file $f)
 
@@ -2836,6 +2873,8 @@ test_53() {
 run_test 53 "Opened for read file on an evicted client should not be set dirty"
 
 test_54() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1MB 39)
 
@@ -2860,6 +2899,8 @@ test_54() {
 run_test 54 "Write during an archive cancels it"
 
 test_55() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1MB 39)
 
@@ -2884,6 +2925,8 @@ test_55() {
 run_test 55 "Truncate during an archive cancels it"
 
 test_56() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1MB 39)
 
@@ -2913,7 +2956,7 @@ test_57() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/test_archive_remote
        # Create a file on a remote node
        do_node $CLIENT2 "dd if=/dev/urandom of=$f bs=1M "\
@@ -2975,7 +3018,7 @@ test_58() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local sz=$(stat -c %s /etc/passwd)
 
@@ -3009,6 +3052,8 @@ test_60() {
        # This test validates the fix for LU-4512. Ensure that the -u
        # option changes the progress reporting interval from the
        # default (30 seconds) to the user-specified interval.
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_file "$f" 1M 10)
 
@@ -3075,7 +3120,7 @@ test_61() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        cdt_disable
@@ -3143,6 +3188,8 @@ test_71() {
        # Just start and stop the copytool to generate events.
        cdt_clear_no_retry
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_small_file "$f")
 
@@ -3215,7 +3262,7 @@ test_72() {
                error "cannot create $test_file on $SINGLEAGT"
        copy2archive $test_file $tdir/$tfile
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        copytool import $tdir/$tfile $f
        f=$DIR2/$tdir/$tfile
@@ -3297,7 +3344,7 @@ run_test 72 "Copytool logs JSON restore events to FIFO"
 
 test_90() {
        file_count=51 # Max number of files constrained by LNET message size
-       mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+       mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
        local f=$DIR/$tdir/$tfile
        local FILELIST=/tmp/filelist.txt
        local i=""
@@ -3387,6 +3434,8 @@ run_test 103 "Purge all requests"
 DATA=CEA
 DATAHEX='[434541]'
 test_104() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -3404,7 +3453,7 @@ run_test 104 "Copy tool data field"
 
 test_105() {
        local max_requests=$(get_hsm_param max_requests)
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local i=""
 
        stack_trap "set_hsm_param max_requests $max_requests" EXIT
@@ -3459,7 +3508,7 @@ test_107() {
        # test needs a running copytool
        copytool setup
        # create and archive file
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f1=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f1)
        $LFS hsm_archive --archive $HSM_ARCHIVE_NUMBER $f1
@@ -3514,7 +3563,7 @@ test_110a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        copy2archive /etc/passwd $tdir/$tfile
 
@@ -3541,7 +3590,7 @@ test_110b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        $LFS hsm_archive --archive $HSM_ARCHIVE_NUMBER $f
@@ -3567,7 +3616,7 @@ test_111a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/passwd $tdir/$tfile
 
        local f=$DIR/$tdir/$tfile
@@ -3596,7 +3645,7 @@ test_111b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        stack_trap cdt_clear_no_retry EXIT
@@ -3621,7 +3670,7 @@ test_112() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
        cdt_disable
@@ -3639,6 +3688,8 @@ test_112() {
 run_test 112 "State of recorded request"
 
 test_113() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local file1=$DIR/$tdir/$tfile
        local file2=$DIR2/$tdir/$tfile
 
@@ -3675,6 +3726,8 @@ test_113() {
 run_test 113 "wrong stat after restore"
 
 test_200() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -3700,6 +3753,7 @@ run_test 200 "Register/Cancel archive"
 test_201() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        create_archive_file $tdir/$tfile
@@ -3719,6 +3773,8 @@ test_201() {
 run_test 201 "Register/Cancel restore"
 
 test_202() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -3742,7 +3798,7 @@ test_220A() { # was test_220
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
@@ -3761,7 +3817,7 @@ test_220a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
@@ -3790,6 +3846,8 @@ test_220a() {
 run_test 220a "Changelog for failed archive"
 
 test_221() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -3816,7 +3874,7 @@ test_222a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/passwd $tdir/$tfile
 
        local f=$DIR/$tdir/$tfile
@@ -3837,7 +3895,7 @@ test_222b() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
 
@@ -3859,7 +3917,7 @@ test_222c() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        copy2archive /etc/passwd $tdir/$tfile
 
        local f=$DIR/$tdir/$tfile
@@ -3893,7 +3951,7 @@ test_222d() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
 
@@ -3916,6 +3974,7 @@ run_test 222d "Changelog for failed implicit restore"
 test_223a() {
        # test needs a running copytool
        copytool setup -b 1
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        create_archive_file $tdir/$tfile
@@ -3937,6 +3996,8 @@ test_223a() {
 run_test 223a "Changelog for restore canceled (import case)"
 
 test_223b() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -3967,7 +4028,7 @@ test_224A() { # was test_224
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
@@ -3988,7 +4049,7 @@ test_224a() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(copy_file /etc/passwd $f)
@@ -4028,6 +4089,7 @@ test_225() {
 
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -4055,7 +4117,7 @@ test_226() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f1=$DIR/$tdir/$tfile-1
        local f2=$DIR/$tdir/$tfile-2
@@ -4130,6 +4192,7 @@ run_test 227 "changelog when explicit setting of HSM flags"
 test_228() {
        # test needs a running copytool
        copytool setup
+       mkdir_on_mdt0 $DIR/$tdir
 
        local fid=$(create_small_sync_file $DIR/$tfile)
        $LFS hsm_archive --archive $HSM_ARCHIVE_NUMBER $DIR/$tfile
@@ -4176,6 +4239,9 @@ test_250() {
 
        # send 1 requests of each kind twice
        copytool setup
+
+       mkdir_on_mdt0 $DIR/$tdir
+
        # setup the files
        for action in archive restore remove; do
                local filepath="$file"-to-$action
@@ -4224,6 +4290,8 @@ test_250() {
 run_test 250 "Coordinator max request"
 
 test_251() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -4253,6 +4321,8 @@ test_251() {
 run_test 251 "Coordinator request timeout"
 
 test_252() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local fid=$(create_empty_file "$f")
 
@@ -4282,7 +4352,7 @@ test_253() {
        # test needs a running copytool
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
        local f=$DIR/$tdir/$tfile
 
        dd if=/dev/zero of=$f bs=1MB count=10
@@ -4346,6 +4416,8 @@ test_254b()
                "set_hsm_param max_requests $(get_hsm_param max_requests)" EXIT
        set_hsm_param max_requests "$request_count"
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        local timeout
        local count
        for request_type in archive restore remove; do
@@ -4406,6 +4478,8 @@ test_255()
        [ $MDS1_VERSION -lt $(version_code 2.12.0) ] &&
                skip "Need MDS version at least 2.12.0"
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        local file="$DIR/$tdir/$tfile"
        local fid=$(create_empty_file "$file")
 
@@ -4463,6 +4537,8 @@ test_260a()
        local -a files=("$DIR/$tdir/$tfile".{0..15})
        local file
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        for file in "${files[@]}"; do
                create_small_file "$file"
        done
@@ -4529,6 +4605,8 @@ test_260b()
        local -a files=("$DIR/$tdir/$tfile".{0..15})
        local file
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        for file in "${files[@]}"; do
                create_small_file "$file"
        done
@@ -4596,6 +4674,8 @@ test_260c()
        local -a files=("$DIR/$tdir/$tfile".{0..15})
        local file
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        for file in "${files[@]}"; do
                create_small_file "$file"
        done
@@ -4745,7 +4825,7 @@ test_400() {
 
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local dir_mdt0=$DIR/$tdir/mdt0
        local dir_mdt1=$DIR/$tdir/mdt1
@@ -4777,7 +4857,7 @@ test_401() {
 
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local dir_mdt0=$DIR/$tdir/mdt0
        local dir_mdt1=$DIR/$tdir/mdt1
@@ -4835,7 +4915,7 @@ run_test 402a "Copytool start fails if all MDTs are inactive"
 test_402b() {
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        touch $f || error "touch $f failed"
@@ -4888,7 +4968,7 @@ test_404() {
        copytool setup
 
        # create files on both MDT0000 and MDT0001
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local dir_mdt0=$DIR/$tdir/mdt0
        stack_trap "rm -rf $dir_mdt0" EXIT
@@ -4917,7 +4997,7 @@ test_405() {
 
        copytool setup
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local striped_dir=$DIR/$tdir/striped_dir
 
@@ -4969,6 +5049,8 @@ test_406() {
        local fid
        local mdt_index
 
+       mkdir_on_mdt0 $DIR/$tdir
+
        fid=$(create_small_file $DIR/$tdir/$tfile)
        echo "old fid $fid"
 
@@ -5019,6 +5101,8 @@ test_406() {
 run_test 406 "attempting to migrate HSM archived files is safe"
 
 test_407() {
+       mkdir_on_mdt0 $DIR/$tdir
+
        local f=$DIR/$tdir/$tfile
        local f2=$DIR2/$tdir/$tfile
        local fid=$(create_empty_file "$f")
@@ -5212,7 +5296,7 @@ test_604() {
        [ $MDS1_VERSION -lt $(version_code 2.10.58) ] &&
                skip "need MDS version at least 2.10.58"
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
        local f2=$DIR2/$tdir/$tfile
@@ -5378,7 +5462,7 @@ test_606() {
        [ -z $(do_facet mgs ls -d $llog_reader 2> /dev/null) ] &&
                        skip_env "missing llog_reader"
 
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        local f=$DIR/$tdir/$tfile
 

diff --git a/lustre/tests/sanity-pcc.sh b/lustre/tests/sanity-pcc.sh
index 83fd952..5e6dce5 100644 (file)
--- a/lustre/tests/sanity-pcc.sh
+++ b/lustre/tests/sanity-pcc.sh
@@ -224,7 +224,7 @@ lpcc_rw_test() {
 
        is_project_quota_supported || project=false
 
-       do_facet $SINGLEAGT mkdir -p $DIR/$tdir
+       do_facet $SINGLEAGT $LFS mkdir -i0 -c1 $DIR/$tdir
        setup_pcc_mapping
        $project && lfs project -sp $project_id $DIR/$tdir
 
@@ -330,7 +330,7 @@ test_1e() {
        setup_pcc_mapping $SINGLEAGT \
                "projid={100}\ rwid=$HSM_ARCHIVE_NUMBER\ auto_attach=0"
        $LCTL pcc list $MOUNT
-       mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+       mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
        chmod 777 $DIR/$tdir || error "chmod 777 $DIR/$tdir failed"
 
        do_facet $SINGLEAGT $RUNAS dd if=/dev/zero of=$file bs=1024 count=1 ||
@@ -393,7 +393,7 @@ test_1f() {
        setup_pcc_mapping $SINGLEAGT \
                "projid={100}\ rwid=$HSM_ARCHIVE_NUMBER\ open_attach=0\ stat_attach=0"
 
-       do_facet $SINGLEAGT mkdir -p $DIR/$tdir
+       do_facet $SINGLEAGT $LFS mkdir -i0 -c1 $DIR/$tdir
        chmod 777 $DIR/$tdir || error "chmod 0777 $DIR/$tdir failed"
        $LFS project -sp $project_id $DIR/$tdir ||
                error "failed to set project for $DIR/$tdir"
@@ -1066,7 +1066,7 @@ test_rule_id() {
                "$rule\ rwid=$HSM_ARCHIVE_NUMBER\ auto_attach=0"
        $LCTL pcc list $MOUNT
 
-       do_facet $SINGLEAGT mkdir -p $DIR/$tdir
+       do_facet $SINGLEAGT $LFS mkdir -i 0 $DIR/$tdir
        chmod 777 $DIR/$tdir || error "chmod 0777 $DIR/$tdir failed"
 
        rm -f $file || error "rm $file failed"
@@ -1241,7 +1241,7 @@ test_15() {
        copytool setup -m "$MOUNT" -a "$HSM_ARCHIVE_NUMBER"
        setup_pcc_mapping
 
-       mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
+       mkdir_on_mdt0 $DIR/$tdir || error "mkdir $DIR/$tdir failed"
        chmod 777 $DIR/$tdir || error "chmod 777 $DIR/$tdir failed"
 
        echo "Check open attach for non-root user"

diff --git a/lustre/tests/sanity-quota.sh b/lustre/tests/sanity-quota.sh
index 3d24f75..40e8d89 100755 (executable)
--- a/lustre/tests/sanity-quota.sh
+++ b/lustre/tests/sanity-quota.sh
@@ -401,9 +401,10 @@ wait_grace_time() {
 }
 
 setup_quota_test() {
+       local mdt=${1:-0}
        wait_delete_completed
        echo "Creating test directory"
-       mkdir $DIR/$tdir || return 1
+       $LFS mkdir -i $mdt -c 1 $DIR/$tdir || return 1
        chmod 0777 $DIR/$tdir || return 2
        # always clear fail_loc in case of fail_loc isn't cleared
        # properly when previous test failed
@@ -1586,7 +1587,7 @@ test_file_soft() {
        local SOFT_LIMIT=$(do_facet $SINGLEMDS $LCTL get_param -n \
                qmt.$FSNAME-QMT0000.md-0x0.soft_least_qunit)
 
-       setup_quota_test
+       setup_quota_test 0
        trap cleanup_quota_test EXIT
        is_project_quota_supported && change_project -sp $TSTPRJID $DIR/$tdir
 
@@ -3404,7 +3405,7 @@ test_38() {
 
        [ "$UID" != 0 ] && skip_env "must run as root" && return
 
-       setup_quota_test || error "setup quota failed with $?"
+       setup_quota_test 0 || error "setup quota failed with $?"
        trap cleanup_quota_test EXIT
 
        # make sure the system is clean

diff --git a/lustre/tests/sanity-sec.sh b/lustre/tests/sanity-sec.sh
index 3277995..15aea96 100755 (executable)
--- a/lustre/tests/sanity-sec.sh
+++ b/lustre/tests/sanity-sec.sh
@@ -168,7 +168,7 @@ test_1() {
        [ $GSS_SUP = 0 ] && skip "without GSS support." && return
 
        rm -rf $DIR/$tdir
-       mkdir -p $DIR/$tdir
+       mkdir_on_mdt0 $DIR/$tdir
 
        chown $USER0 $DIR/$tdir || error "chown (1)"
        $RUNAS_CMD -u $ID1 -v $ID0 touch $DIR/$tdir/f0 && error "touch (2)"