LU-11527 tests: fix sanity 270a for ARM

Fix sanity test_270a to work with ARM so that it does O_DIRECT
writes with a multiple of the local PAGE_SIZE (65536 bytes)
instead of 102400 bytes (which works fine on x64, but not ARM).

Generalize the test to use variables instead of precomputed values
so that it is clear why the particular values are used.

Test-Parameters: trivial envdefinitions=ONLY=270a
Test-Parameters: mdtfilesystemtype=zfs ostfilesystemtype=zfs testlist=sanity envdefinitions=ONLY=270a
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ic2a32215dc1423b0bbf1e5188a5e85420a3ebbe5
Reviewed-on: https://review.whamcloud.com/33633
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>

diff --git a/lustre/tests/sanity.sh b/lustre/tests/sanity.sh
index a92bf03..5558f35 100755 (executable)
--- a/lustre/tests/sanity.sh
+++ b/lustre/tests/sanity.sh
@@ -16778,7 +16778,7 @@ run_test 260 "Check mdc_close fail"
 ### Data-on-MDT sanity tests ###
 test_270a() {
        [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.10.55) ] &&
-               skip "Need MDS version at least 2.10.55"
+               skip "Need MDS version at least 2.10.55 for DoM"
 
        # create DoM file
        local dom=$DIR/$tdir/dom_file
@@ -16787,14 +16787,13 @@ test_270a() {
        mkdir -p $DIR/$tdir
 
        # basic checks for DoM component creation
-       $LFS setstripe -E 1024K -E 1024K -L mdt $dom 2>/dev/null &&
+       $LFS setstripe -E 1024K -E 2048K -L mdt $dom 2>/dev/null &&
                error "Can set MDT layout to non-first entry"
 
-       $LFS setstripe -E 1024K -L mdt -E 1024K -L mdt $dom 2>/dev/null &&
+       $LFS setstripe -E 1024K -L mdt -E 2048K -L mdt $dom 2>/dev/null &&
                error "Can define multiple entries as MDT layout"
 
-       $LFS setstripe -E 1M -L mdt $dom ||
-               error "Can't create DoM layout"
+       $LFS setstripe -E 1M -L mdt $dom || error "Can't create DoM layout"
 
        [ $($LFS getstripe -L $dom) == "mdt" ] || error "bad pattern"
        [ $($LFS getstripe -c $dom) == 0 ] || error "bad stripe count"
@@ -16806,46 +16805,61 @@ test_270a() {
        local space_check=1
 
        # Skip free space checks with ZFS
-       if [ "$(facet_fstype $facet)" == "zfs" ]; then
-               space_check=0
-       fi
+       [ "$(facet_fstype $facet)" == "zfs" ] && space_check=0
 
        # write
        sync
+       local size_tmp=$((65536 * 3))
        local mdtfree1=$(do_facet $facet \
-               lctl get_param -n osd*.*$mdtname.kbytesfree)
-       dd if=/dev/urandom of=$tmp bs=1024 count=100
+                        lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+       dd if=/dev/urandom of=$tmp bs=1024 count=$((size_tmp / 1024))
        # check also direct IO along write
-       dd if=$tmp of=$dom bs=102400 count=1 oflag=direct
+       # IO size must be a multiple of PAGE_SIZE on all platforms (ARM=64KB)
+       dd if=$tmp of=$dom bs=65536 count=$((size_tmp / 65536)) oflag=direct
        sync
        cmp $tmp $dom || error "file data is different"
-       [ $(stat -c%s $dom) == 102400 ] || error "bad size after write"
+       [ $(stat -c%s $dom) == $size_tmp ] ||
+               error "bad size after write: $(stat -c%s $dom) != $size_tmp"
        if [ $space_check == 1 ]; then
                local mdtfree2=$(do_facet $facet \
-                               lctl get_param -n osd*.*$mdtname.kbytesfree)
-               [ $(($mdtfree1 - $mdtfree2)) -ge 102 ] ||
-                       error "MDT free space is wrong after write"
+                                lctl get_param -n osd*.*$mdtname.kbytesfree)
+
+               # increase in usage from by $size_tmp
+               [ $(($mdtfree1 - $mdtfree2)) -ge $((size_tmp / 1024)) ] ||
+                       error "MDT free space wrong after write: " \
+                             "$mdtfree1 >= $mdtfree2 + $size_tmp/1024"
        fi
 
        # truncate
-       $TRUNCATE $dom 10000
-       [ $(stat -c%s $dom) == 10000 ] || error "bad size after truncate"
+       local size_dom=10000
+
+       $TRUNCATE $dom $size_dom
+       [ $(stat -c%s $dom) == $size_dom ] ||
+               error "bad size after truncate: $(stat -c%s $dom) != $size_dom"
        if [ $space_check == 1 ]; then
                mdtfree1=$(do_facet $facet \
                                lctl get_param -n osd*.*$mdtname.kbytesfree)
-               [ $(($mdtfree1 - $mdtfree2)) -ge 92 ] ||
-                       error "MDT free space is wrong after truncate"
+               # decrease in usage from $size_tmp to new $size_dom
+               [ $(($mdtfree1 - $mdtfree2)) -ge \
+                 $(((size_tmp - size_dom) / 1024)) ] ||
+                       error "MDT free space is wrong after truncate: " \
+                             "$mdtfree1 >= $mdtfree2 + ($size_tmp - $size_dom) / 1024"
        fi
 
        # append
        cat $tmp >> $dom
        sync
-       [ $(stat -c%s $dom) == 112400 ] || error "bad size after append"
+       size_dom=$((size_dom + size_tmp))
+       [ $(stat -c%s $dom) == $size_dom ] ||
+               error "bad size after append: $(stat -c%s $dom) != $size_dom"
        if [ $space_check == 1 ]; then
                mdtfree2=$(do_facet $facet \
                                lctl get_param -n osd*.*$mdtname.kbytesfree)
-               [ $(($mdtfree1 - $mdtfree2)) -ge 102 ] ||
-                       error "MDT free space is wrong after append"
+               # increase in usage by $size_tmp from previous
+               [ $(($mdtfree1 - $mdtfree2)) -ge $((size_tmp / 1024)) ] ||
+                       error "MDT free space is wrong after append: " \
+                             "$mdtfree1 >= $mdtfree2 + $size_tmp/1024"
        fi
 
        # delete
@@ -16853,22 +16867,25 @@ test_270a() {
        if [ $space_check == 1 ]; then
                mdtfree1=$(do_facet $facet \
                                lctl get_param -n osd*.*$mdtname.kbytesfree)
-               [ $(($mdtfree1 - $mdtfree2)) -ge 112 ] ||
-                       error "MDT free space is wrong after removal"
+               # decrease in usage by $size_dom from previous
+               [ $(($mdtfree1 - $mdtfree2)) -ge $((size_dom / 1024)) ] ||
+                       error "MDT free space is wrong after removal: " \
+                             "$mdtfree1 >= $mdtfree2 + $size_dom/1024"
        fi
 
        # combined striping
        $LFS setstripe -E 1024K -L mdt -E EOF $dom ||
                error "Can't create DoM + OST striping"
 
-       dd if=/dev/urandom of=$tmp bs=1024 count=2000
+       size_tmp=2031616 # must be a multiple of PAGE_SIZE=65536 on ARM
+       dd if=/dev/urandom of=$tmp bs=1024 count=$((size_tmp / 1024))
        # check also direct IO along write
-       dd if=$tmp of=$dom bs=102400 count=20 oflag=direct
+       dd if=$tmp of=$dom bs=65536 count=$((size_tmp / 65536)) oflag=direct
        sync
        cmp $tmp $dom || error "file data is different"
-       [ $(stat -c%s $dom) == 2048000 ] || error "bad size after write"
-       rm $dom
-       rm $tmp
+       [ $(stat -c%s $dom) == $size_tmp ] ||
+               error "bad size after write: $(stat -c%s $dom) != $size_tmp"
+       rm $dom $tmp
 
        return 0
 }