noinst_SCRIPTS += recovery-small.sh replay-dual.sh sanity-quota.sh
noinst_SCRIPTS += replay-ost-single.sh replay-single.sh run-llog.sh sanityn.sh
noinst_SCRIPTS += large-scale.sh racer.sh replay-vbr.sh
-noinst_SCRIPTS += performance-sanity.sh mdsrate-create-small.sh
-noinst_SCRIPTS += mdsrate-create-large.sh mdsrate-lookup-1dir.sh
-noinst_SCRIPTS += mdsrate-lookup-10dirs.sh sanity-benchmark.sh
-noinst_SCRIPTS += mdsrate-stat-small.sh mdsrate-stat-large.sh
+noinst_SCRIPTS += performance-sanity.sh sanity-benchmark.sh
noinst_SCRIPTS += lockorder.sh socketclient socketserver runmultiop_bg_pause
noinst_SCRIPTS += sanity-sec.sh sanity-selinux.sh recovery-scale-lib.sh
noinst_SCRIPTS += recovery-mds-scale.sh recovery-oss-scale.sh
SLOW=${SLOW:-no}
FAIL_ON_ERROR=${FAIL_ON_ERROR:-true}
+MDTEST=${MDTEST:-$(which mdtest 2>/dev/null || true)}
MPIRUN=${MPIRUN:-$(which mpirun 2>/dev/null || true)}
MPIRUN_OPTIONS=${MPIRUN_OPTIONS:-"--oversubscribe"}
MPI_USER=${MPI_USER:-mpiuser}
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-4 test).
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-BASEDIR=$MOUNT/mdsrate
-
-# Requirements
-# set NUM_FILES=0 to force TIME_PERIOD work
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-# Local test variables
-TESTDIR_SINGLE="${BASEDIR}/single"
-TESTDIR_MULTI="${BASEDIR}/multi"
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-c -1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-# Make sure we start with a clean slate
-rm -f ${LOG}
-
-if [ -n "$NOSINGLE" ]; then
- echo "NO Test for creates for a single client."
-else
- # We can use np = $NUM_CLIENTS to speed up the cleanup
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_SINGLE 'f%%d' --ignore
-
- log "===== $0 ### 1 NODE CREATE ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
- --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate create on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR_SINGLE 'f%%d' --ignore
- exit 1
- fi
-
- log "===== $0 ### 1 NODE UNLINK ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
- --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error "mdsrate unlink on a single client failed, aborting"
- fi
-
- rmdir $TESTDIR_SINGLE
-fi
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-[ $NUM_CLIENTS -eq 1 ] && NOMULTI=yes
-if [ -n "$NOMULTI" ]; then
- echo "NO test for create on multiple nodes."
-else
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_MULTI 'f%%d' --ignore
-
- log "===== $0 ### $NUM_CLIENTS NODES CREATE ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
- --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate create on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR_MULTI 'f%%d' --ignore
- exit 1
- fi
-
- log "===== $0 ### $NUM_CLIENTS NODES UNLINK ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
- --nfiles ${NUM_FILES} --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error "mdsrate unlink on multiple nodes failed, aborting"
- fi
-
- rmdir $TESTDIR_MULTI
-fi
-
-restore_lustre_params < $p
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-3 test).
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-BASEDIR=$MOUNT/mdsrate
-
-# Requirements
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-# Local test variables
-TESTDIR_SINGLE="${BASEDIR}/single"
-TESTDIR_MULTI="${BASEDIR}/multi"
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-# XXX - this needs to be determined given the number of MDTs and the number
-# of clients.
-THREADS_PER_CLIENT=3 # threads/client for multi client test
-if [ $NUM_CLIENTS -gt 50 ]; then
- THREADS_PER_CLIENT=1
-fi
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-# Make sure we start with a clean slate
-rm -f ${LOG}
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-i 0 -c 1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-if [ -n "$NOSINGLE" ]; then
- echo "NO Tests on single client."
-else
- if [ -n "$NOCREATE" ]; then
- echo "NO Test for creates for a single client."
- else
- # We can use np = $NUM_CLIENTS to speed up the cleanup
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_SINGLE 'f%%d' --ignore
-
- log "===== $0 ### 1 NODE CREATE ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
- --nfiles $NUM_FILES --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate create on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR_SINGLE 'f%%d' --ignore
- exit 1
- fi
- fi
-
- if [ -n "$NOUNLINK" ]; then
- echo "NO Test for unlinks for a single client."
- else
- log "===== $0 ### 1 NODE UNLINK ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
- --nfiles ${NUM_FILES} --dir ${TESTDIR_SINGLE} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error "mdsrate unlinks for a single client failed, aborting"
- fi
-
- rmdir $TESTDIR_SINGLE
- fi
-fi
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-if [ -n "$NOMULTI" ]; then
- echo "NO tests on multiple nodes."
-else
- if [ -n "$NOCREATE" ]; then
- echo "NO test for create on multiple nodes."
- else
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR_MULTI 'f%%d' --ignore
-
- log "===== $0 ### $NUM_CLIENTS NODES CREATE with $THREADS_PER_CLIENT threads per client ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --time ${TIME_PERIOD}
- --nfiles $NUM_FILES --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
- -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate create on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $((NUM_CLIENTS * THREADS_PER_CLIENT)) \
- $MACHINEFILE $NUM_FILES \
- $TESTDIR_MULTI 'f%%d' --ignore
- exit 1
- fi
- fi
-
- if [ -n "$NOUNLINK" ]; then
- echo "NO Test for unlinks multiple nodes."
- else
- log "===== $0 ### $NUM_CLIENTS NODES UNLINK with $THREADS_PER_CLIENT threads per client ###"
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --unlink
- --nfiles ${NUM_FILES} --dir ${TESTDIR_MULTI} --filefmt 'f%%d'"
- echo "+ ${COMMAND}"
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} \
- -np $((NUM_CLIENTS * THREADS_PER_CLIENT)) ${COMMAND} |
- tee ${LOG}
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error "mdsrate unlinks multiple nodes failed, aborting"
- fi
-
- rmdir $TESTDIR_MULTI
- fi
-fi
-
-complete_test $SECONDS
-restore_lustre_params < $p
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-5 test).
-
-# Directory lookup retrieval rate 10 directories 1 million files each
-# 6000 random lookups/sec per client node 62,000 random lookups/sec aggregate
-#
-# In 10 dirs containing 1 million files each the mdsrate Test Program will
-# perform lookups for 10 minutes. This test is run from a single node for
-# #1 and from all nodes for #2 aggregate test to measure lookup performance.
-# TEst performs lookups across all 10 directories.
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-# Do not use name [df][0-9]* to avoid cleanup by rm, bug 18045
-BASEDIR=$MOUNT/mdsrate
-
-# Requirements
-NUM_DIRS=${NUM_DIRS:-10}
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-
-rm -f $LOG
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-c 1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(($(mdsrate_inodes_available) - NUM_DIRS))
-if [ $IFree -lt $((NUM_FILES * NUM_DIRS)) ]; then
- NUM_FILES=$((IFree / NUM_DIRS))
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-DIRfmt="${BASEDIR}/lookup-%d"
-
-#
-# Unlink the files created in the directories under $BASEDIR.
-# FIXME: does it make sense to add the possibility to unlink dirfmt to mdsrate?
-#
-mdsrate_cleanup_all() {
- local i
- for i in $(seq 0 $NUM_DIRS); do
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $BASEDIR/lookup-$i 'f%%d' --ignore
- done
-}
-
-if [ -n "$NOCREATE" ]; then
- echo "NOCREATE=$NOCREATE => no file creation."
-else
- mdsrate_cleanup_all
-
- log "===== $0 Test preparation: creating ${NUM_DIRS} dirs with ${NUM_FILES} files."
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --mknod
- --ndirs ${NUM_DIRS} --dirfmt '${DIRfmt}'
- --nfiles ${NUM_FILES} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
-
- echo "+" ${COMMAND}
- # For files creation we can use -np equal to NUM_DIRS
- # This is just a test preparation, does not matter how many threads we
- # use for files creation; we just should be aware that NUM_DIRS is less
- # than or equal to the number of threads np
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_DIRS} \
- ${COMMAND} 2>&1
-
- # No lookup if error occurs on file creation, abort.
- if [ ${PIPESTATUS[0]} != 0 ]; then
- error_noexit "mdsrate file creation failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup_all
- exit 1
- fi
-fi
-
-COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --lookup --time ${TIME_PERIOD} ${SEED_OPTION}
- --ndirs ${NUM_DIRS} --dirfmt '${DIRfmt}'
- --nfiles ${NUM_FILES} --filefmt 'f%%d'"
-
-# 1
-if [ -n "$NOSINGLE" ]; then
- echo "NO Test for lookups on a single client."
-else
- log "===== $0 ### 1 NODE LOOKUPS ###"
- echo "+" ${COMMAND}
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate lookup on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup_all
- exit 1
- fi
-fi
-
-# 2
-[ $NUM_CLIENTS -eq 1 ] && NOMULTI=yes
-if [ -n "$NOMULTI" ]; then
- echo "NO test for lookups on multiple nodes."
-else
- log "===== $0 ### ${NUM_CLIENTS} NODES LOOKUPS ###"
- echo "+" ${COMMAND}
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate lookup on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup_all
- exit 1
- fi
-fi
-
-complete_test $SECONDS
-restore_lustre_params < $p
-mdsrate_cleanup_all
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-5 test).
-
-# Directory lookup retrieval rate single directory 10 million files
-# 5900 random lookups/sec per client node 62,000 random lookups/sec aggregate
-#
-# In a dir containing 10 million non-striped files the mdsrate Test Program will
-# perform lookups for 10 minutes. This test can be run from a single node for
-# #1 and from all nodes for #2 aggregate test to measure lookup performance.
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-# Do not use name [df][0-9]* to avoid cleanup by rm, bug 18045
-BASEDIR=$MOUNT/mdsrate
-TESTDIR=$BASEDIR/lookup
-
-# Requirements
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-
-rm -f $LOG
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-c 1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-if [ -n "$NOCREATE" ]; then
- echo "NOCREATE=$NOCREATE => no file creation."
-else
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d' --ignore
-
- log "===== $0 Test preparation: creating ${NUM_FILES} files."
-
- NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
- NUM_THREADS=$((NUM_CLIENTS * MDSCOUNT))
- if [ $NUM_CLIENTS -gt 50 ]; then
- NUM_THREADS=$NUM_CLIENTS
- fi
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --mknod --dir ${TESTDIR}
- --nfiles ${NUM_FILES} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
- echo "+" ${COMMAND}
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_THREADS} \
- ${COMMAND} 2>&1
-
- # No lockup if error occurs on file creation, abort.
- if [ ${PIPESTATUS[0]} != 0 ]; then
- error_noexit "mdsrate file creation failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_THREADS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --lookup --time ${TIME_PERIOD} ${SEED_OPTION}
- --dir ${TESTDIR} --nfiles ${NUM_FILES} --filefmt 'f%%d'"
-
-# 1
-if [ -n "$NOSINGLE" ]; then
- echo "NO Test for lookups on a single client."
-else
- log "===== $0 ### 1 NODE LOOKUPS ###"
- echo "+" ${COMMAND}
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate lookup on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-# 2
-[ $NUM_CLIENTS -eq 1 ] && NOMULTI=yes
-if [ -n "$NOMULTI" ]; then
- echo "NO test for lookups on multiple nodes."
-else
- log "===== $0 ### ${NUM_CLIENTS} NODES LOOKUPS ###"
- echo "+" ${COMMAND}
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate lookup on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-complete_test $SECONDS
-restore_lustre_params < $p
-mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d'
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-8 test).
-
-# File attribute retrieval rate for large file creation
-# 3300 ops/sec/OST for single node 28500 ops/sec/OST aggregate
-
-# In a dir containing 10 million striped files, the mdsrate Test Program will
-# perform directory ordered stat's (readdir) for 10 minutes. This test will be
-# run from a single node for #1 and from all nodes for #2 aggregate test to
-# measure stat performance.
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-# Do not use name [df][0-9]* to avoid cleanup by rm, bug 18045
-BASEDIR=$MOUNT/mdsrate
-TESTDIR=$MOUNT/stat
-
-# Requirements
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-
-rm -f $LOG
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-c -1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-if [ -n "$NOCREATE" ]; then
- echo "NOCREATE=$NOCREATE => no file creation."
-else
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d' --ignore
-
- log "===== $0 Test preparation: creating ${NUM_FILES} files."
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --create --dir ${TESTDIR}
- --nfiles ${NUM_FILES} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
- echo "+" ${COMMAND}
-
- NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
- NUM_THREADS=$((NUM_CLIENTS * MDSCOUNT))
- if [ $NUM_CLIENTS -gt 50 ]; then
- NUM_THREADS=$NUM_CLIENTS
- fi
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_THREADS} \
- ${COMMAND} 2>&1
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- error_noexit "mdsrate file creation failed, aborting"
- mdsrate_cleanup $NUM_THREADS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --stat --time ${TIME_PERIOD}
- --dir ${TESTDIR} --nfiles ${NUM_FILES} --filefmt 'f%%d'"
-
-# 1
-if [ -n "$NOSINGLE" ]; then
- echo "NO Test for stats on a single client."
-else
- log "===== $0 ### 1 NODE STAT ###"
- echo "+" ${COMMAND}
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate stat on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-# 2
-[ $NUM_CLIENTS -eq 1 ] && NOMULTI=yes
-if [ -n "$NOMULTI" ]; then
- echo "NO test for stats on multiple nodes."
-else
- log "===== $0 ### ${NUM_CLIENTS} NODES STAT ###"
- echo "+" ${COMMAND}
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate stat on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-
-complete_test $SECONDS
-restore_lustre_params < $p
-mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d'
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
+++ /dev/null
-#!/bin/bash
-#
-# This test was used in a set of CMD3 tests (cmd3-7 test).
-
-# File attribute retrieval rate for small file creation
-# 3200 ops/sec for single node 29,000 ops/sec aggregate
-
-# In a dir containing 10 million non-striped files, the mdsrate Test Program
-# will perform directory ordered stat's (readdir) for 10 minutes. This test
-# will be run from a single node for #1 and from all nodes for #2
-# aggregate test to measure stat performance.
-
-LUSTRE=${LUSTRE:-$(dirname $0)/..}
-. $LUSTRE/tests/test-framework.sh
-init_test_env "$@"
-
-assert_env CLIENTS MDSRATE SINGLECLIENT MPIRUN
-
-# Do not use name [df][0-9]* to avoid cleanup by rm, bug 18045
-BASEDIR=$MOUNT/mdsrate
-TESTDIR=$BASEDIR/stat
-
-# Requirements
-NUM_FILES=${NUM_FILES:-1000000}
-TIME_PERIOD=${TIME_PERIOD:-600} # seconds
-
-LOG=${TESTSUITELOG:-$TMP/$(basename $0 .sh).log}
-CLIENT=$SINGLECLIENT
-NODES_TO_USE=${NODES_TO_USE:-$CLIENTS}
-NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
-
-rm -f $LOG
-
-[ ! -x ${MDSRATE} ] && error "${MDSRATE} not built."
-
-log "===== $0 ====== "
-
-check_and_setup_lustre
-
-MDSRATE_ENABLE_DNE=${MDSRATE_ENABLE_DNE:-false}
-if $MDSRATE_ENABLE_DNE; then
- test_mkdir $BASEDIR
- mdtcount_opt="--mdtcount $MDSCOUNT"
-else
- mkdir $BASEDIR
-fi
-if $VERBOSE; then
- debug_opt="--debug"
-fi
-chmod 0777 $BASEDIR
-mdsrate_STRIPEPARAMS=${mdsrate_STRIPEPARAMS:-${fs_STRIPEPARAMS:-"-i 0 -c 1"}}
-setstripe_getstripe $BASEDIR $mdsrate_STRIPEPARAMS
-
-IFree=$(mdsrate_inodes_available)
-if [ $IFree -lt $NUM_FILES ]; then
- NUM_FILES=$IFree
-fi
-
-generate_machine_file $NODES_TO_USE $MACHINEFILE ||
- error "can not generate machinefile"
-
-p="$TMP/$TESTSUITE-$TESTNAME.parameters"
-save_lustre_params $(get_facets MDS) mdt.*.enable_remote_dir_gid > $p
-do_nodes $(comma_list $(mdts_nodes)) \
- $LCTL set_param mdt.*.enable_remote_dir_gid=-1
-
-if [ -n "$NOCREATE" ]; then
- echo "NOCREATE=$NOCREATE => no file creation."
-else
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d' --ignore
-
- log "===== $0 Test preparation: creating ${NUM_FILES} files."
-
- COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --mknod --dir ${TESTDIR}
- --nfiles ${NUM_FILES} --filefmt 'f%%d'
- $mdtcount_opt $debug_opt"
- echo "+" ${COMMAND}
-
- NUM_CLIENTS=$(get_node_count ${NODES_TO_USE//,/ })
- NUM_THREADS=$((NUM_CLIENTS * MDSCOUNT))
- if [ $NUM_CLIENTS -gt 50 ]; then
- NUM_THREADS=$NUM_CLIENTS
- fi
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_THREADS} \
- ${COMMAND} 2>&1
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- error_noexit "mdsrate file creation failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_THREADS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-COMMAND="${MDSRATE} ${MDSRATE_DEBUG} --stat --time ${TIME_PERIOD}
- --dir ${TESTDIR} --nfiles ${NUM_FILES} --filefmt 'f%%d'"
-
-# 1
-if [ -n "$NOSINGLE" ]; then
- echo "NO Test for stats on a single client."
-else
- log "===== $0 ### 1 NODE STAT ###"
- echo "+" ${COMMAND}
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np 1 ${COMMAND} |
- tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate stat on single client failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-# 2
-[ $NUM_CLIENTS -eq 1 ] && NOMULTI=yes
-if [ -n "$NOMULTI" ]; then
- echo "NO test for stats on multiple nodes."
-else
- log "===== $0 ### ${NUM_CLIENTS} NODES STAT ###"
- echo "+" ${COMMAND}
-
- mpi_run ${MACHINEFILE_OPTION} ${MACHINEFILE} -np ${NUM_CLIENTS} \
- ${COMMAND} | tee ${LOG}
-
- if [ ${PIPESTATUS[0]} != 0 ]; then
- [ -f $LOG ] && sed -e "s/^/log: /" $LOG
- error_noexit "mdsrate stat on multiple nodes failed, aborting"
- restore_lustre_params < $p
- mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES \
- $TESTDIR 'f%%d' --ignore
- exit 1
- fi
-fi
-
-complete_test $SECONDS
-restore_lustre_params < $p
-mdsrate_cleanup $NUM_CLIENTS $MACHINEFILE $NUM_FILES $TESTDIR 'f%%d'
-rmdir $BASEDIR || true
-rm -f $MACHINEFILE
-check_and_cleanup_lustre
-#rm -f $LOG
-
-exit 0
#!/bin/bash
+
set -e
TESTNAME=$(basename $0 .sh)
init_logging
ALWAYS_EXCEPT="$PERFORMANCE_SANITY_EXCEPT "
-always_except LU-16658 6
build_test_filter
-[ -x "$MDSRATE" ] || FAIL_ON_ERROR=true error "No mdsrate program. Aborting."
-which mpirun > /dev/null 2>&1 ||
- FAIL_ON_ERROR=true error "No mpirun program. Aborting."
+[[ -x "$MPIRUN" ]] || skip_env "no mpirun program found"
+[[ -x "$MDTEST" ]] || skip_env "no mdtest program found"
+
+check_and_setup_lustre
get_mpiuser_id $MPI_USER
MPI_RUNAS=${MPI_RUNAS:-"runas -u $MPI_USER_UID -g $MPI_USER_GID"}
$GSS_KRB5 && refresh_krb5_tgt $MPI_USER_UID $MPI_USER_GID $MPI_RUNAS
-# mdsrate-create-small
-test_3() {
- echo "File creation performance tests for file objects"
- bash mdsrate-create-small.sh
-}
-run_test 3 "small file create/open/delete ======"
-
-# mdsrate-create-large
-test_4() {
+test_1() {
+ echo "Small files creation performance test"
# LU-2600/LU-4108 - Decrease load on zfs
- [ "$SLOW" = no -a "$mds1_FSTYPE" = zfs ] &&
+ if [[ "$SLOW" == no && "$mds1_FSTYPE" == zfs ]]; then
NUM_FILES=10000
- echo "Large file creation performance"
- bash mdsrate-create-large.sh
-}
-run_test 4 "large file create/open/delete"
-
-# mdsrate-lookup-1dir
-test_5() {
- echo "Single directory lookup retrieval rate"
- bash mdsrate-lookup-1dir.sh
+ fi
+ run_mdtest create-small
}
-run_test 5 "lookup rate 10M file dir ======"
+run_test 1 "small files create/open/delete"
-# mdsrate-lookup-10dir
-test_6() {
- echo "Directory lookup retrieval rate 10 directories, 1 million files each"
- bash mdsrate-lookup-10dirs.sh
+test_2() {
+ echo "Large files creation performance test"
+ run_mdtest create-large
}
-run_test 6 "lookup rate 10M file 10 dir ======"
+run_test 2 "large files create/open/delete"
-# mdsrate-stat-small
-test_7() {
- echo "File attribute retrieval rate for small file creation"
- bash mdsrate-stat-small.sh
+test_3() {
+ NUM_DIRS=1
+ NUM_FILES=200000
+ echo "Single directory lookup rate for $NUM_FILES files"
+ run_mdtest lookup-single
}
-run_test 7 "getattr small file ======"
+run_test 3 "lookup rate 200k files in single directory"
-# mdsrate-stat-large
-test_8() {
- echo "File attribute retrieval rate for large file creation"
- bash mdsrate-stat-large.sh
+test_4() {
+ NUM_DIRS=100
+ NUM_FILES=200000
+ echo "Directory lookup rate $NUM_DIRS directories, $((NUM_FILES/NUM_DIRS)) files each"
+ run_mdtest lookup-multi
}
-run_test 8 "getattr large files ======"
+run_test 4 "lookup rate 200k files in 100 directories"
complete_test $SECONDS
check_and_cleanup_lustre
-[ -f "$LOG" ] && cat $LOG || true
exit_status
echo $((min_inodes * 99 / 100))
}
+bytes_available () {
+ echo $(df -P -B 1 "$MOUNT" | awk 'END {print $4}')
+}
+
+mdsrate_bytes_available () {
+ local bytes=$(bytes_available)
+
+ echo $((bytes * 99 / 100))
+}
+
# reset stat counters
clear_stats() {
local paramfile="$1"
fi
}
+run_mdtest () {
+ local test_type="$1"
+ local file_size=0
+ local num_files=0
+ local num_cores=0
+ local num_procs=0
+ local num_hosts=0
+ local free_space=0
+ local num_inodes=0
+ local num_entries=0
+ local num_dirs=0
+ local np=0
+ local rc=0
+
+ local mdtest_basedir
+ local mdtest_actions
+ local mdtest_options
+ local stripe_options
+ local params_file
+
+ case "$test_type" in
+ create-small)
+ stripe_options=(-c 1 -i 0)
+ mdtest_actions=(-F -R)
+ file_size=1024
+ num_files=100000
+ ;;
+ create-large)
+ stripe_options=(-c -1)
+ mdtest_actions=(-F -R)
+ file_size=$((1024 * 1024 * 1024))
+ num_files=16
+ ;;
+ lookup-single)
+ stripe_options=(-c 1)
+ mdtest_actions=(-C -D -E -k -r)
+ num_dirs=1
+ num_files=100000
+ ;;
+ lookup-multi)
+ stripe_options=(-c 1)
+ mdtest_actions=(-C -D -E -k -r)
+ num_dirs=100
+ num_files=1000
+ ;;
+ *)
+ stripe_options=(-c -1)
+ mdtest_actions=()
+ num_files=100000
+ ;;
+ esac
+
+ if [[ -n "$MDTEST_DEBUG" ]]; then
+ mdtest_options+=(-v -v -v)
+ fi
+
+ num_dirs=${NUM_DIRS:-$num_dirs}
+ num_files=${NUM_FILES:-$num_files}
+ file_size=${FILE_SIZE:-$file_size}
+ free_space=$(mdsrate_bytes_available)
+
+ if (( file_size * num_files > free_space )); then
+ file_size=$((free_space / num_files))
+ log "change file size to $file_size due to" \
+ "number of files $num_files and" \
+ "free space limit in $free_space"
+ fi
+
+ if (( file_size > 0 )); then
+ log "set file size to $file_size"
+ mdtest_options+=(-w=$file_size)
+ fi
+
+ params_file=$TMP/$TESTSUITE-$TESTNAME.parameters
+ mdtest_basedir=$MOUNT/mdtest
+ mdtest_options+=(-d=$mdtest_basedir)
+
+ num_cores=$(nproc)
+ num_hosts=$(get_node_count ${CLIENTS//,/ })
+ num_procs=$((num_cores * num_hosts))
+ num_inodes=$(mdsrate_inodes_available)
+
+ if (( num_inodes < num_files )); then
+ log "change the number of files $num_files to the" \
+ "number of available inodes $num_inodes"
+ num_files=$num_inodes
+ fi
+
+ if (( num_dirs > 1 )); then
+ num_entries=$((num_files / num_dirs))
+ log "split $num_files files to $num_dirs" \
+ "with $num_entries files each"
+ mdtest_options+=(-I=$num_entries)
+ fi
+
+ generate_machine_file $CLIENTS $MACHINEFILE ||
+ error "can not generate machinefile"
+
+ install -v -d -m 0777 $mdtest_basedir
+
+ setstripe_getstripe $mdtest_basedir ${stripe_options[@]}
+
+ save_lustre_params $(get_facets MDS) \
+ mdt.*.enable_remote_dir_gid > $params_file
+
+ do_nodes $(comma_list $(mdts_nodes)) \
+ $LCTL set_param mdt.*.enable_remote_dir_gid=-1
+
+ stack_trap "restore_lustre_params < $params_file" EXIT
+
+ for np in 1 $num_procs; do
+ num_entries=$((num_files / np ))
+
+ mpi_run $MACHINEFILE_OPTION $MACHINEFILE \
+ -np $np -npernode $num_cores $MDTEST \
+ ${mdtest_options[@]} -n=$num_entries \
+ ${mdtest_actions[@]} 2>&1 | tee -a "$LOG"
+
+ rc=${PIPESTATUS[0]}
+
+ if (( rc != 0 )); then
+ mpi_run $MACHINEFILE_OPTION $MACHINEFILE \
+ -np $np -npernode $num_cores $MDTEST \
+ ${mdtest_options[@]} -n=$num_entries \
+ -r 2>&1 | tee -a "$LOG"
+ break
+ fi
+ done
+
+ rmdir -v $mdtest_basedir
+ rm -v $state $MACHINEFILE
+
+ return $rc
+}
+
########################
convert_facet2label() {
git://git.whamcloud.com / fs / lustre-release.git / commitdiff