2 # vim:expandtab:shiftwidth=4:softtabstop=4:tabstop=4:
4 trap 'print_summary && echo "test-framework exiting on error"' ERR
9 export REFORMAT=${REFORMAT:-""}
10 export WRITECONF=${WRITECONF:-""}
12 export GMNALNID=${GMNALNID:-/usr/sbin/gmlndnid}
13 export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
16 export GSS_PIPEFS=false
17 export IDENTITY_UPCALL=default
18 #export PDSH="pdsh -S -Rssh -w"
20 # eg, assert_env LUSTRE MDSNODES OSTNODES CLIENTS
24 if [ -z "${!name}" ]; then
25 echo "$0: $name must be set"
29 [ $failed ] && exit 1 || true
34 [ -z "`echo :$DIR: | grep :$MOUNT:`" ] && \
35 failed=1 && echo "DIR not in $MOUNT. Aborting."
36 [ -z "`echo :$DIR1: | grep :$MOUNT1:`" ] && \
37 failed=1 && echo "DIR1 not in $MOUNT1. Aborting."
38 [ -z "`echo :$DIR2: | grep :$MOUNT2:`" ] && \
39 failed=1 && echo "DIR2 not in $MOUNT2. Aborting"
41 [ -n "$failed" ] && exit 99 || true
45 echo "usage: $0 [-r] [-f cfgfile]"
52 [ "$TESTSUITE" == "lfscktest" ] && return 0
53 [ -n "$ONLY" ] && echo "WARNING: ONLY is set to ${ONLY}."
54 local form="%-13s %-17s %s\n"
55 printf "$form" "status" "script" "skipped tests E(xcluded) S(low)"
56 echo "------------------------------------------------------------------------------------"
57 for O in $TESTSUITE_LIST; do
60 local o=$(echo $O | tr "[:upper:]" "[:lower:]")
63 local log=${TMP}/${o}.log
64 [ -f $log ] && skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
65 [ -f $log ] && slow=$(grep SLOW $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
66 [ "${!O}" = "done" ] && \
67 printf "$form" "Done" "$O" "E=$skipped" && \
68 [ -n "$slow" ] && printf "$form" "-" "-" "S=$slow"
72 for O in $TESTSUITE_LIST; do
73 [ "${!O}" = "no" ] && \
74 printf "$form" "Skipped" "$O" ""
77 for O in $TESTSUITE_LIST; do
78 [ "${!O}" = "done" -o "${!O}" = "no" ] || \
79 printf "$form" "UNFINISHED" "$O" ""
84 export LUSTRE=`absolute_path $LUSTRE`
85 export TESTSUITE=`basename $0 .sh`
87 #[ -d /r ] && export ROOT=${ROOT:-/r}
88 export TMP=${TMP:-$ROOT/tmp}
89 export TESTSUITELOG=${TMP}/${TESTSUITE}.log
90 export HOSTNAME=${HOSTNAME:-`hostname`}
91 if ! echo $PATH | grep -q $LUSTRE/utils; then
92 export PATH=$PATH:$LUSTRE/utils
94 if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
95 export PATH=$PATH:$LUSTRE/utils/gss
97 if ! echo $PATH | grep -q $LUSTRE/tests; then
98 export PATH=$PATH:$LUSTRE/tests
100 export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mdsrate"}
101 [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate)
102 export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
103 [ ! -f "$LCTL" ] && export LCTL=$(which lctl)
104 export LFS=${LFS:-"$LUSTRE/utils/lfs"}
105 [ ! -f "$LFS" ] && export LFS=$(which lfs)
106 export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
107 if [ ! -f "$L_GETIDENTITY" ]; then
108 if `which l_getidentity > /dev/null 2>&1`; then
109 export L_GETIDENTITY=$(which l_getidentity)
111 export L_GETIDENTITY=NONE
114 export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
115 [ ! -f "$MKFS" ] && export MKFS=$(which mkfs.lustre)
116 export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
117 [ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
118 export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
119 export FSYTPE=${FSTYPE:-"ldiskfs"}
120 export NAME=${NAME:-local}
121 export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
122 [ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
123 export LGSSD=$(which lgssd)
124 export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
125 [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd)
126 export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
128 export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
131 if [ "$ACCEPTOR_PORT" ]; then
132 export PORT_OPT="--port $ACCEPTOR_PORT"
137 echo "Using GSS/krb5 ptlrpc security flavor"
138 which lgss_keyring > /dev/null 2>&1 || \
139 error "built with gss disabled! SEC=$SEC"
150 IDENTITY_UPCALL=false
154 # Paths on remote nodes, if different
155 export RLUSTRE=${RLUSTRE:-$LUSTRE}
156 export RPWD=${RPWD:-$PWD}
157 export I_MOUNTED=${I_MOUNTED:-"no"}
161 while getopts "rvwf:" opt $*; do
164 r) REFORMAT=--reformat;;
166 w) WRITECONF=writeconf;;
171 shift $((OPTIND - 1))
174 [ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
183 BASE=`basename $module $EXT`
184 lsmod | grep -q ${BASE} || \
185 if [ -f ${LUSTRE}/${module}${EXT} ]; then
186 insmod ${LUSTRE}/${module}${EXT} $@
188 # must be testing a "make install" or "rpm" installation
189 # note failed to load ptlrpc_gss is considered not fatal
190 if [ "$BASE" == "ptlrpc_gss" ]; then
191 modprobe $BASE $@ 2>/dev/null || echo "gss/krb5 is not supported"
199 if [ -n "$MODPROBE" ]; then
203 if [ "$HAVE_MODULES" = true ]; then
209 echo Loading modules from $LUSTRE
210 load_module ../libcfs/libcfs/libcfs
211 [ "$PTLDEBUG" ] && lctl set_param debug=$PTLDEBUG
212 [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug=${SUBSYSTEM# }
213 [ -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
214 [ -f /etc/modprobe.d/Lustre ] && MODPROBECONF=/etc/modprobe.d/Lustre
215 [ -z "$LNETOPTS" -a -n "$MODPROBECONF" ] && \
216 LNETOPTS=$(awk '/^options lnet/ { print $0}' $MODPROBECONF | sed 's/^options lnet //g')
217 echo $LNETOPTS | grep -q "accept=all" || LNETOPTS="$LNETOPTS accept=all";
218 echo "lnet options: '$LNETOPTS'"
219 # note that insmod will ignore anything in modprobe.conf
220 load_module ../lnet/lnet/lnet $LNETOPTS
221 LNETLND=${LNETLND:-"socklnd/ksocklnd"}
222 load_module ../lnet/klnds/$LNETLND
223 load_module lvfs/lvfs
224 load_module obdclass/obdclass
225 load_module ptlrpc/ptlrpc
226 load_module ptlrpc/gss/ptlrpc_gss
227 # Now, some modules depend on lquota without USE_QUOTA check,
228 # will fix later. Disable check "$USE_QUOTA" = "yes" temporary.
229 #[ "$USE_QUOTA" = "yes" ] && load_module quota/lquota
230 load_module quota/lquota
238 if [ -z "$CLIENTONLY" ] && [ -z "$CLIENTMODSONLY" ]; then
239 grep -q crc16 /proc/kallsyms || { modprobe crc16 2>/dev/null || true; }
240 [ "$FSTYPE" = "ldiskfs" ] && load_module ../ldiskfs/ldiskfs/ldiskfs
245 load_module lvfs/fsfilt_$FSTYPE
249 load_module obdfilter/obdfilter
252 load_module llite/lustre
253 load_module llite/llite_lloop
254 rm -f $TMP/ogdb-$HOSTNAME
256 [ -d /r ] && OGDB="/r/tmp"
257 $LCTL modules > $OGDB/ogdb-$HOSTNAME
259 # 'mount' doesn't look in $PATH, just sbin
260 [ -f $LUSTRE/utils/mount.lustre ] && cp $LUSTRE/utils/mount.lustre /sbin/. || true
264 if [ `uname -r | cut -c 3` -eq 4 ]; then
272 MODULES=$($LCTL modules | awk '{ print $2 }')
273 while [ -n "$MODULES" ]; do
275 $RMMOD $MODULES > /dev/null 2>&1 || true
276 MODULES=$($LCTL modules | awk '{ print $2 }')
277 if [ -z "$MODULES" ]; then
281 echo "waiting, $((MAX - WAIT)) secs left"
283 if [ $WAIT -eq $MAX ]; then
284 echo "LNET modules $MODULES will not unload"
291 unload_dep_module() {
293 #libcfs 107852 17 llite_lloop,lustre,obdfilter,ost,...
295 local DEPS=$(lsmod | awk '($1 == "'$MODULE'") { print $4 }' | tr ',' ' ')
296 for SUBMOD in $DEPS; do
297 unload_dep_module $SUBMOD
299 [ "$MODULE" = "libcfs" ] && $LCTL dk $TMP/debug || true
300 $RMMOD $MODULE || true
304 LEAK_LUSTRE=$(dmesg | tail -n 30 | grep "obd_memory.*leaked" || true)
305 LEAK_PORTALS=$(dmesg | tail -n 20 | grep "Portals memory leaked" || true)
306 if [ "$LEAK_LUSTRE" -o "$LEAK_PORTALS" ]; then
307 echo "$LEAK_LUSTRE" 1>&2
308 echo "$LEAK_PORTALS" 1>&2
309 mv $TMP/debug $TMP/debug-leak.`date +%s` || true
310 log "Memory leaks detected"
311 [ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
317 wait_exit_ST client # bug 12845
319 lsmod | grep libcfs > /dev/null && $LCTL dl
320 unload_dep_module $FSTYPE
321 unload_dep_module libcfs
323 local MODULES=$($LCTL modules | awk '{ print $2 }')
324 if [ -n "$MODULES" ]; then
325 echo "Modules still loaded: "
327 if [ "$(lctl dl)" ]; then
328 echo "Lustre still loaded"
333 echo "Lustre stopped but LNET is still loaded, waiting..."
334 wait_for_lnet || return 3
340 check_mem_leak || return 254
342 echo "modules unloaded."
346 check_gss_daemon_facet() {
350 num=`do_facet $facet ps -o cmd -C $dname | grep $dname | wc -l`
351 if [ $num -ne 1 ]; then
352 echo "$num instance of $dname on $facet"
361 do_facet $facet "killall -2 $@ 2>/dev/null || true"
364 start_gss_daemons() {
366 for num in `seq $MDSCOUNT`; do
367 do_facet mds$num "$LSVCGSSD -v"
369 do_facet mds$num "$LGSSD -v"
373 for num in `seq $OSTCOUNT`; do
374 do_facet ost$num "$LSVCGSSD -v"
377 # FIXME: is "client" the right facet name?
379 do_facet client "$LGSSD -v"
382 # wait daemons entering "stable" status
386 # check daemons are running
388 for num in `seq $MDSCOUNT`; do
389 check_gss_daemon_facet mds$num lsvcgssd
391 check_gss_daemon_facet mds$num lgssd
394 for num in `seq $OSTCOUNT`; do
395 check_gss_daemon_facet ost$num lsvcgssd
398 check_gss_daemon_facet client lgssd
403 for num in `seq $MDSCOUNT`; do
404 send_sigint mds$num lsvcgssd lgssd
406 for num in `seq $OSTCOUNT`; do
407 send_sigint ost$num lsvcgssd
409 send_sigint client lgssd
421 # maybe cleanup credential cache?
427 local device=`mdsdevname $num`
428 local label=`do_facet mds$num "e2label ${device}" | grep -v "CMD: "`
434 local device=`ostdevname $num`
435 local label=`do_facet ost$num "e2label ${device}" | grep -v "CMD: "`
443 local dev=${facet}_dev
444 local opt=${facet}_opt
445 echo "Starting ${facet}: ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}"
446 do_facet ${facet} mount -t lustre ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}
448 if [ $RC -ne 0 ]; then
449 echo "mount -t lustre $@ ${!dev} ${MOUNT%/*}/${facet}"
450 echo "Start of ${!dev} on ${facet} failed ${RC}"
452 do_facet ${facet} "lctl set_param debug=$PTLDEBUG; \
453 lctl set_param subsystem_debug=${SUBSYSTEM# }; \
454 lctl set_param debug_mb=${DEBUG_SIZE}; \
457 label=$(do_facet ${facet} "e2label ${!dev}")
458 [ -z "$label" ] && echo no label for ${!dev} && exit 1
459 eval export ${facet}_svc=${label}
460 echo Started ${label}
465 # start facet device options
471 eval export ${facet}_dev=${device}
472 eval export ${facet}_opt=\"$@\"
473 do_facet ${facet} mkdir -p ${MOUNT%/*}/${facet}
483 HOST=`facet_active_host $facet`
484 [ -z $HOST ] && echo stop: no host for $facet && return 0
486 running=$(do_facet ${facet} "grep -c ${MOUNT%/*}/${facet}' ' /proc/mounts") || true
487 if [ ${running} -ne 0 ]; then
488 echo "Stopping ${MOUNT%/*}/${facet} (opts:$@)"
489 do_facet ${facet} umount -d $@ ${MOUNT%/*}/${facet}
492 # umount should block, but we should wait for unrelated obd's
493 # like the MGS or MGC to also stop.
494 wait_exit_ST ${facet}
501 # Only supply -o to mount if we have options
502 if [ -n "$MOUNTOPT" ]; then
503 OPTIONS="-o $MOUNTOPT"
505 local device=$MGSNID:/$FSNAME
506 if [ -z "$mnt" -o -z "$FSNAME" ]; then
507 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
511 echo "Starting client: $client: $OPTIONS $device $mnt"
512 do_node $client mkdir -p $mnt
513 do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
515 do_node $client "lctl set_param debug=$PTLDEBUG;
516 lctl set_param subsystem_debug=${SUBSYSTEM# };
517 lctl set_param debug_mb=${DEBUG_SIZE}"
526 local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
527 if [ $running -ne 0 ]; then
528 echo "Stopping client $client $mnt (opts:$force)"
529 lsof | grep "$mnt" || true
530 do_node $client umount $force $mnt
534 # mount clients if not mouted
535 zconf_mount_clients() {
541 # Only supply -o to mount if we have options
542 if [ -n "$MOUNTOPT" ]; then
543 OPTIONS="-o $MOUNTOPT"
545 local device=$MGSNID:/$FSNAME
546 if [ -z "$mnt" -o -z "$FSNAME" ]; then
547 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
551 echo "Starting client $clients: $OPTIONS $device $mnt"
552 do_nodes $clients "mount | grep $mnt || { mkdir -p $mnt && mount -t lustre $OPTIONS $device $mnt || false; }"
554 echo "Started clients $clients: "
555 do_nodes $clients "mount | grep $mnt"
557 do_nodes $clients "lctl set_param debug=$PTLDEBUG;
558 lctl set_param subsystem_debug=${SUBSYSTEM# };
559 lctl set_param debug_mb=${DEBUG_SIZE};"
564 zconf_umount_clients() {
569 echo "Umounting clients: $clients"
570 echo "Stopping clients: $clients $mnt (opts:$force)"
571 do_nodes $clients umount $force $mnt
576 if [ "$FAILURE_MODE" = HARD ]; then
577 $POWER_DOWN `facet_active_host $facet`
579 elif [ "$FAILURE_MODE" = SOFT ]; then
586 if [ "$FAILURE_MODE" = HARD ]; then
587 $POWER_UP `facet_active_host $facet`
593 # verify that lustre actually cleaned up properly
595 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
596 error "LBUG/LASSERT detected"
597 BUSY=`dmesg | grep -i destruct || true`
600 [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.`date +%s`
604 check_mem_leak || exit 204
606 [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl && \
607 echo "$0: lustre didn't clean up..." 1>&2 && return 202 || true
609 if [ "`/sbin/lsmod 2>&1 | egrep 'lnet|libcfs'`" ]; then
610 echo "$0: modules still loaded..." 1>&2
617 wait_delete_completed () {
618 local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
619 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
623 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
625 TOTAL=`lctl get_param -n osc.*.kbytesavail | \
626 awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
627 [ "$TOTAL" -eq "$TOTALPREV" ] && break
628 echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
632 echo "Delete completed."
637 check_network "$HOST" 900
638 while ! do_node $HOST "ls -d $LUSTRE " > /dev/null; do sleep 5; done
643 HOST=`facet_active_host $facet`
647 wait_mds_recovery_done () {
648 local timeout=`do_facet $SINGLEMDS lctl get_param -n timeout`
649 #define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
650 # as we are in process of changing obd_timeout in different ways
651 # let's set MAX longer than that
652 MAX=$(( timeout * 4 ))
654 while [ $WAIT -lt $MAX ]; do
655 STATUS=`do_facet $SINGLEMDS "lctl get_param -n mdt.*-MDT0000.recovery_status | grep status"`
656 echo $STATUS | grep COMPLETE && return 0
659 echo "Waiting $(($MAX - $WAIT)) secs for MDS recovery done"
661 echo "MDS recovery not done in $MAX sec"
670 # conf-sanity 31 takes a long time cleanup
671 while [ $WAIT -lt 300 ]; do
672 running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
673 [ -z "${running}" ] && return 0
674 echo "waited $WAIT for${running}"
675 [ $INTERVAL -lt 64 ] && INTERVAL=$((INTERVAL + INTERVAL))
677 WAIT=$((WAIT + INTERVAL))
679 echo "service didn't stop after $WAIT seconds. Still running:"
684 wait_remote_prog () {
690 [ "$PDSH" = "no_dsh" ] && return 0
692 while [ $WAIT -lt $2 ]; do
693 running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep)
694 [ -z "${running}" ] && return 0
695 echo "waited $WAIT for: "
697 [ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
699 WAIT=$((WAIT + INTERVAL))
701 local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
702 [ -z "$pids" ] && return 0
703 echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
705 cat /proc/${pid}/status || true
706 cat /proc/${pid}/wchan || true
717 # not every config has many clients
718 if [ ! -z "$CLIENTS" ]; then
719 $PDSH $CLIENTS "df $MOUNT" > /dev/null
721 df $MOUNT > /dev/null
726 uname -n >> $MOUNT/recon
727 if [ -z "$CLIENTS" ]; then
728 df $MOUNT; uname -n >> $MOUNT/recon
730 do_nodes $CLIENTS "df $MOUNT; uname -n >> $MOUNT/recon" > /dev/null
732 echo Connected clients:
734 ls -l $MOUNT/recon > /dev/null
740 echo "Failing $facet on node `facet_active_host $facet`"
741 shutdown_facet $facet
745 echo "df pid is $DFPID"
747 TO=`facet_active_host $facet`
748 echo "Failover $facet to $TO"
750 mount_facet $facet || error "Restart of $facet failed"
761 local svc=${facet}_svc
762 do_facet $facet $LCTL --device %${!svc} readonly
763 do_facet $facet $LCTL --device %${!svc} notransno
764 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
765 $LCTL mark "local REPLAY BARRIER on ${!svc}"
768 replay_barrier_nodf() {
769 local facet=$1 echo running=${running}
771 local svc=${facet}_svc
772 echo Replay barrier on ${!svc}
773 do_facet $facet $LCTL --device %${!svc} readonly
774 do_facet $facet $LCTL --device %${!svc} notransno
775 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
776 $LCTL mark "local REPLAY BARRIER on ${!svc}"
779 replay_barrier_nosync() {
780 local facet=$1 echo running=${running}
781 local svc=${facet}_svc
782 echo Replay barrier on ${!svc}
783 do_facet $facet $LCTL --device %${!svc} readonly
784 do_facet $facet $LCTL --device %${!svc} notransno
785 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
786 $LCTL mark "local REPLAY BARRIER on ${!svc}"
790 UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
791 do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
795 UUID=`lctl get_param -n devices| grep ${ost1_svc}-osc- | egrep -v 'MDT' | awk '{print $5}'`
796 do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.evict_client $UUID"
800 facet_failover $* || error "failover: $?"
801 df $MOUNT || error "post-failover df: $?"
806 facet_failover $facet
813 mount_facet $facet -o abort_recovery
814 df $MOUNT || echo "first df failed: $?"
816 df $MOUNT || error "post-failover df: $?"
820 echo There is no lmc. This is mountconf, baby.
825 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
826 ID=`$PDSH $1 $GMNALNID -l | cut -d\ -f2`
832 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
838 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
839 ID=`xtprocadmin -n $1 2>/dev/null | egrep -v 'NID' | awk '{print $1}'`
840 if [ -z "$ID" ]; then
841 echo "Could not get a ptl id for $1..."
850 h2name_or_ip "$1" "tcp"
855 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
856 if type __h2elan >/dev/null 2>&1; then
859 ID=`echo $1 | sed 's/[^0-9]*//g'`
867 h2name_or_ip "$1" "openib"
872 h2name_or_ip "$1" "o2ib"
878 varname=${facet}_HOST
879 if [ -z "${!varname}" ]; then
880 if [ "${facet:0:3}" == "ost" ]; then
881 eval ${facet}_HOST=${ost_HOST}
889 local activevar=${facet}active
891 if [ -f $TMP/${facet}active ] ; then
892 source $TMP/${facet}active
896 if [ -z "$active" ] ; then
903 facet_active_host() {
905 local active=`facet_active $facet`
906 if [ "$facet" == client ]; then
909 echo `facet_host $active`
915 failover=${facet}failover
916 host=`facet_host $failover`
917 [ -z "$host" ] && return
918 curactive=`facet_active $facet`
919 if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
920 eval export ${facet}active=$facet
922 eval export ${facet}active=$failover
924 # save the active host for this facet
925 activevar=${facet}active
926 echo "$activevar=${!activevar}" > $TMP/$activevar
933 if [ "$HOST" = "$HOSTNAME" ]; then
935 elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
936 echo "cannot run remote command on $HOST with $myPDSH"
940 echo "CMD: $HOST $@" >&2
941 $myPDSH $HOST $LCTL mark "$@" > /dev/null 2>&1 || :
944 if [ "$myPDSH" = "rsh" ]; then
945 # we need this because rsh does not return exit code of an executed command
946 local command_status="$TMP/cs"
947 rsh $HOST ":> $command_status"
948 rsh $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin;
949 cd $RPWD; sh -c \"$@\") ||
950 echo command failed >$command_status"
951 [ -n "$($myPDSH $HOST cat $command_status)" ] && return 1 || true
954 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; sh -c \"$@\")" | sed "s/^${HOST}: //"
955 return ${PIPESTATUS[0]}
958 single_local_node () {
959 [ "$1" = "$HOSTNAME" ]
966 if $(single_local_node $rnodes); then
971 # This is part from do_node
974 [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
975 echo "cannot run remote command on $rnodes with $myPDSH" && return 128
978 echo "CMD: $rnodes $@" >&2
979 $myPDSH $rnodes $LCTL mark "$@" > /dev/null 2>&1 || :
982 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; sh -c \"$@\")" | sed -re "s/\w+:\s//g"
983 return ${PIPESTATUS[0]}
989 HOST=`facet_active_host $facet`
990 [ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
997 # make sure its not already running
999 rm -f $TMP/${facet}active
1000 do_facet ${facet} $MKFS $*
1006 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
1007 eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}}
1014 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
1015 eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}}
1023 # make sure we are using the primary server, so test-framework will
1024 # be able to clean up properly.
1025 activemds=`facet_active mds1`
1026 if [ $activemds != "mds1" ]; then
1030 # assume client mount is local
1031 grep " $MOUNT " /proc/mounts && zconf_umount $HOSTNAME $MOUNT $*
1032 grep " $MOUNT2 " /proc/mounts && zconf_umount $HOSTNAME $MOUNT2 $*
1034 if [ -n "$CLIENTS" ]; then
1035 zconf_umount_clients $CLIENTS $MOUNT "$*" || true
1036 [ -n "$MOUNT2" ] && zconf_umount_clients $CLIENTS $MOUNT2 "$*" || true
1039 [ "$CLIENTONLY" ] && return
1040 # The add fn does rm ${facet}active file, this would be enough
1041 # if we use do_facet <facet> only after the facet added, but
1042 # currently we use do_facet mds in local.sh
1043 for num in `seq $MDSCOUNT`; do
1045 rm -f ${TMP}/mds${num}active
1048 for num in `seq $OSTCOUNT`; do
1050 rm -f $TMP/ost${num}active
1065 test $nr = 1 && echo -n $MDS_MKFS_OPTS || echo -n $MDSn_MKFS_OPTS
1069 [ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
1071 if [ ! -z $SEC ]; then
1072 MDS_MKFS_OPTS="$MDS_MKFS_OPTS --param srpc.flavor.default=$SEC"
1073 MDSn_MKFS_OPTS="$MDSn_MKFS_OPTS --param srpc.flavor.default=$SEC"
1074 OST_MKFS_OPTS="$OST_MKFS_OPTS --param srpc.flavor.default=$SEC"
1078 # We need ldiskfs here, may as well load them all
1080 [ "$CLIENTONLY" ] && return
1081 echo "Formatting mdts, osts"
1082 for num in `seq $MDSCOUNT`; do
1083 echo "Format mds$num: $(mdsdevname $num)"
1085 add mds$num `mdsmkfsopts $num` $FSTYPE_OPT --reformat `mdsdevname $num` || exit 9
1087 add mds$num `mdsmkfsopts $num` $FSTYPE_OPT --reformat `mdsdevname $num` > /dev/null || exit 9
1091 for num in `seq $OSTCOUNT`; do
1092 echo "Format ost$num: $(ostdevname $num)"
1094 add ost$num $OST_MKFS_OPTS --reformat `ostdevname $num` || exit 10
1096 add ost$num $OST_MKFS_OPTS --reformat `ostdevname $num` > /dev/null || exit 10
1102 grep " $1 " /proc/mounts || zconf_mount $HOSTNAME $*
1106 grep " $1 " /proc/mounts && zconf_umount `hostname` $*
1110 # 0: success, the old identity set already.
1111 # 1: success, the old identity does not set.
1116 local j=`expr $num - 1`
1117 local MDT="`do_facet mds$num lctl get_param -N mdt.*MDT*$j | cut -d"." -f2 2>/dev/null || true`"
1119 if [ -z "$MDT" ]; then
1123 local old="`do_facet mds$num "lctl get_param -n mdt.$MDT.identity_upcall"`"
1126 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"$L_GETIDENTITY\""
1128 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"NONE\""
1131 do_facet mds$num "lctl set_param -n mdt/$MDT/identity_flush \"-1\""
1133 if [ $old = "NONE" ]; then
1142 zconf_umount `hostname` $1 || error "umount failed"
1143 zconf_mount `hostname` $1 || error "mount failed"
1150 do_facet $facet lsmod | grep -q obdclass || \
1151 do_facet $facet "modprobe obdclass"
1153 do_facet $facet "lctl set_param timeout=$timeout"
1156 writeconf_facet () {
1160 do_facet $facet "$TUNEFS --writeconf $dev"
1164 for num in `seq $MDSCOUNT`; do
1165 DEVNAME=$(mdsdevname $num)
1166 writeconf_facet mds$num $DEVNAME
1169 for num in `seq $OSTCOUNT`; do
1170 DEVNAME=$(ostdevname $num)
1171 writeconf_facet ost$num $DEVNAME
1178 if [ -z "$CLIENTONLY" ]; then
1179 echo "Setup mdts, osts"
1180 echo $WRITECONF | grep -q "writeconf" && \
1182 for num in `seq $MDSCOUNT`; do
1183 DEVNAME=$(mdsdevname $num)
1184 set_obd_timeout mds$num $TIMEOUT
1185 start mds$num $DEVNAME $MDS_MOUNT_OPTS
1187 # We started mds, now we should set failover variables properly.
1188 # Set mds${num}failover_HOST if it is not set (the default failnode).
1189 local varname=mds${num}failover_HOST
1190 if [ -z "${!varname}" ]; then
1191 eval mds${num}failover_HOST=$(facet_host mds$num)
1194 if [ $IDENTITY_UPCALL != "default" ]; then
1195 switch_identity $num $IDENTITY_UPCALL
1198 for num in `seq $OSTCOUNT`; do
1199 DEVNAME=$(ostdevname $num)
1200 set_obd_timeout ost$num $TIMEOUT
1201 start ost$num $DEVNAME $OST_MOUNT_OPTS
1203 # We started ost$num, now we should set ost${num}failover variable properly.
1204 # Set ost${num}failover_HOST if it is not set (the default failnode).
1205 varname=ost${num}failover_HOST
1206 if [ -z "${!varname}" ]; then
1207 eval ost${num}failover_HOST=$(facet_host ost${num})
1212 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
1214 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
1216 if [ "$MOUNT_2" ]; then
1217 mount_client $MOUNT2
1218 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
1221 # by remounting mdt before ost, initial connect from mdt to ost might
1222 # timeout because ost is not ready yet. wait some time to its fully
1223 # recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
1224 # by a context negotiation rpc with $TIMEOUT.
1225 # FIXME better by monitoring import status.
1227 sleep $((TIMEOUT + 5))
1233 mounted_lustre_filesystems() {
1234 awk '($3 ~ "lustre" && $1 ~ ":") { print $2 }' /proc/mounts
1237 init_facet_vars () {
1244 eval export ${facet}_dev=${device}
1245 eval export ${facet}_opt=\"$@\"
1247 local dev=${facet}_dev
1248 local label=$(do_facet ${facet} "e2label ${!dev}")
1249 [ -z "$label" ] && echo no label for ${!dev} && exit 1
1251 eval export ${facet}_svc=${label}
1253 local varname=${facet}failover_HOST
1254 if [ -z "${!varname}" ]; then
1255 eval $varname=$(facet_host $facet)
1259 init_facets_vars () {
1262 for num in `seq $MDSCOUNT`; do
1263 DEVNAME=`mdsdevname $num`
1264 init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
1267 for num in `seq $OSTCOUNT`; do
1268 DEVNAME=`ostdevname $num`
1269 init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
1273 check_and_setup_lustre() {
1274 MOUNTED="`mounted_lustre_filesystems`"
1275 if [ -z "$MOUNTED" ]; then
1276 [ "$REFORMAT" ] && formatall
1278 MOUNTED="`mounted_lustre_filesystems`"
1279 [ -z "$MOUNTED" ] && error "NAME=$NAME not mounted"
1280 export I_MOUNTED=yes
1284 if [ "$ONLY" == "setup" ]; then
1289 cleanup_and_setup_lustre() {
1290 if [ "$ONLY" == "cleanup" -o "`mount | grep $MOUNT`" ]; then
1291 lctl set_param debug=0 || true
1293 if [ "$ONLY" == "cleanup" ]; then
1297 check_and_setup_lustre
1300 check_and_cleanup_lustre() {
1301 if [ "`mount | grep $MOUNT`" ]; then
1302 [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]*
1304 if [ "$I_MOUNTED" = "yes" ]; then
1305 cleanupall -f || error "cleanup failed"
1317 while [ $NETWORK -eq 0 ]; do
1318 ping -c 1 -w 3 $1 > /dev/null
1319 if [ $? -eq 0 ]; then
1323 echo "waiting for $1, $((MAX - WAIT)) secs left"
1326 if [ $WAIT -gt $MAX ]; then
1327 echo "Network not available"
1333 while( !($DSH2 $1 "netstat -tna | grep -q $2") ) ; do
1344 # the sed converts spaces to commas, but leaves the last space
1345 # alone, so the line doesn't end with a comma.
1346 echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
1350 (cd `dirname $1`; echo $PWD/`basename $1`)
1353 ##################################
1354 # Adaptive Timeouts funcs
1357 if [ -z "$AT_MAX_PATH" ]; then
1358 AT_MAX_PATH=$(do_facet $SINGLEMDS "find /sys/ -name at_max")
1359 [ -z "$AT_MAX_PATH" ] && echo "missing /sys/.../at_max " && return 1
1365 at_is_valid || error "invalid call"
1367 # only check mds, we assume at_max is the same on all nodes
1368 local at_max=$(do_facet $SINGLEMDS "cat $AT_MAX_PATH")
1369 if [ $at_max -eq 0 ]; then
1379 at_is_valid || error "invalid call"
1381 # suppose that all ost-s has the same at_max set
1382 if [ $facet == "ost" ]; then
1383 do_facet ost1 "cat $AT_MAX_PATH"
1385 do_facet $facet "cat $AT_MAX_PATH"
1393 at_is_valid || error "invalid call"
1397 if [ $facet == "ost" ]; then
1398 for i in `seq $OSTCOUNT`; do
1399 do_facet ost$i "echo $at_max > $AT_MAX_PATH"
1401 elif [ $facet == "mds" ]; then
1402 for i in `seq $MDSCOUNT`; do
1403 do_facet mds$i "echo $at_max > $AT_MAX_PATH"
1406 do_facet $facet "echo $at_max > $AT_MAX_PATH"
1411 ##################################
1415 # OBD_FAIL_MDS_ALL_REQUEST_NET
1417 do_facet $SINGLEMDS lctl set_param fail_loc=0x123
1418 do_facet client "$1" || RC=$?
1419 do_facet $SINGLEMDS lctl set_param fail_loc=0
1424 # OBD_FAIL_MDS_ALL_REPLY_NET
1426 do_facet $SINGLEMDS lctl set_param fail_loc=0x122
1427 do_facet client "$@" || RC=$?
1428 do_facet $SINGLEMDS lctl set_param fail_loc=0
1432 drop_reint_reply() {
1433 # OBD_FAIL_MDS_REINT_NET_REP
1435 do_facet $SINGLEMDS lctl set_param fail_loc=0x119
1436 do_facet client "$@" || RC=$?
1437 do_facet $SINGLEMDS lctl set_param fail_loc=0
1442 #define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
1444 do_facet ost1 lctl set_param fail_loc=0x214
1445 do_facet client "$1" || RC=$?
1446 do_facet client "sync"
1447 do_facet ost1 lctl set_param fail_loc=0
1451 drop_ldlm_cancel() {
1452 #define OBD_FAIL_LDLM_CANCEL 0x304
1454 do_facet client lctl set_param fail_loc=0x304
1455 do_facet client "$@" || RC=$?
1456 do_facet client lctl set_param fail_loc=0
1460 drop_bl_callback() {
1461 #define OBD_FAIL_LDLM_BL_CALLBACK 0x305
1463 do_facet client lctl set_param fail_loc=0x305
1464 do_facet client "$@" || RC=$?
1465 do_facet client lctl set_param fail_loc=0
1470 #define OBD_FAIL_LDLM_REPLY 0x30c
1472 do_facet $SINGLEMDS lctl set_param fail_loc=0x30c
1473 do_facet client "$@" || RC=$?
1474 do_facet $SINGLEMDS lctl set_param fail_loc=0
1482 echo "clearing fail_loc on $facet"
1483 do_facet $facet "lctl set_param fail_loc=0 2>/dev/null || true"
1486 set_nodes_failloc () {
1490 for node in $nodes ; do
1491 do_node $node lctl set_param fail_loc=$2
1495 cancel_lru_locks() {
1496 $LCTL mark "cancel_lru_locks $1 start"
1497 for d in `lctl get_param -N ldlm.namespaces.*.lru_size | egrep -i $1`; do
1498 $LCTL set_param -n $d=clear
1500 $LCTL get_param ldlm.namespaces.*.lock_unused_count | egrep -i $1 | grep -v '=0'
1501 $LCTL mark "cancel_lru_locks $1 stop"
1506 NR_CPU=$(grep -c "processor" /proc/cpuinfo)
1507 DEFAULT_LRU_SIZE=$((100 * NR_CPU))
1508 echo "$DEFAULT_LRU_SIZE"
1513 lctl set_param ldlm.namespaces.*$1*.lru_size=0
1516 lru_resize_disable()
1518 lctl set_param ldlm.namespaces.*$1*.lru_size $(default_lru_size)
1523 for FILE in `lctl get_param -N "llite.*.dump_page_cache"`; do
1524 if [ `lctl get_param -n $FILE | wc -l` -gt 1 ]; then
1525 echo there is still data in page cache $FILE ?
1526 lctl get_param -n $FILE
1534 DEBUGSAVE="$(lctl get_param -n debug)"
1538 [ -n "$DEBUGSAVE" ] && lctl set_param debug="${DEBUGSAVE}"
1542 ##################################
1544 ##################################
1547 local TYPE=${TYPE:-"FAIL"}
1549 lctl set_param fail_loc=0 2>/dev/null || true
1550 log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
1551 ERRLOG=$TMP/lustre_${TESTSUITE}_${TESTNAME}.$(date +%s)
1552 echo "Dumping lctl log to $ERRLOG"
1553 # We need to dump the logs on all nodes
1554 local NODES=$(nodes_list)
1555 for NODE in $NODES; do
1556 do_node $NODE $LCTL dk $ERRLOG
1559 [ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
1564 $FAIL_ON_ERROR && exit 1 || true
1572 # use only if we are ignoring failures for this test, bugno required.
1573 # (like ALWAYS_EXCEPT, but run the test and ignore the results.)
1574 # e.g. error_ignore 5494 "your message"
1576 local TYPE="IGNORE (bz$1)"
1582 log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
1583 [ "$TESTSUITELOG" ] && \
1584 echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
1587 build_test_filter() {
1588 [ "$ONLY" ] && log "only running test `echo $ONLY`"
1592 [ "$EXCEPT$ALWAYS_EXCEPT" ] && \
1593 log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
1594 [ "$EXCEPT_SLOW" ] && \
1595 log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
1596 for E in $EXCEPT $ALWAYS_EXCEPT; do
1597 eval EXCEPT_${E}=true
1599 for E in $EXCEPT_SLOW; do
1600 eval EXCEPT_SLOW_${E}=true
1602 for G in $GRANT_CHECK_LIST; do
1603 eval GCHECK_ONLY_${G}=true
1612 IFS=abcdefghijklmnopqrstuvwxyz _basetest $1
1618 export base=`basetest $1`
1619 if [ ! -z "$ONLY" ]; then
1621 if [ ${!testname}x != x ]; then
1626 if [ ${!testname}x != x ]; then
1634 if [ ${!testname}x != x ]; then
1635 TESTNAME=test_$1 skip "skipping excluded test $1"
1638 testname=EXCEPT_$base
1639 if [ ${!testname}x != x ]; then
1640 TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
1643 testname=EXCEPT_SLOW_$1
1644 if [ ${!testname}x != x ]; then
1645 TESTNAME=test_$1 skip "skipping SLOW test $1"
1648 testname=EXCEPT_SLOW_$base
1649 if [ ${!testname}x != x ]; then
1650 TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
1659 EQUALS="======================================================================"
1663 local suffixlen=$((${#EQUALS} - ${#msg}))
1664 [ $suffixlen -lt 5 ] && suffixlen=5
1665 log `echo $(printf '===== %s %.*s\n' "$msg" $suffixlen $EQUALS)`
1670 lsmod | grep lnet > /dev/null || load_modules
1682 local NODES=$(nodes_list)
1683 for NODE in $NODES; do
1684 do_node $NODE $LCTL mark "$MSG" 2> /dev/null || true
1690 strace -o $TMP/$1.strace -ttt $*
1692 log "FINISHED: $*: rc $RC"
1701 FFREE=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filesfree | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
1702 FTOTAL=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filestotal | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
1703 [ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
1707 local myNODES=$(nodes_list)
1710 for NODE in $myNODES; do
1711 do_node $NODE "lctl set_param fail_loc=0 2>/dev/null || true"
1719 export tdir=d0.${TESTSUITE}/d${base}
1720 local SAVE_UMASK=`umask`
1724 log "== test $testnum: $message ============ `date +%H:%M:%S` ($BEFORE)"
1726 export TESTNAME=test_$testnum
1727 test_${testnum} || error "test_$testnum failed with $?"
1731 check_grant ${testnum} || error "check_grant $testnum failed with $?"
1732 check_catastrophe || error "LBUG/LASSERT detected"
1733 ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
1734 pass "($((`date +%s` - $BEFORE))s)"
1741 (cd `dirname $1`; echo $PWD/`basename $1`)
1745 [ -d $DIR1 ] && cd $DIR1 && sync; sleep 1; sync
1746 [ -d $DIR2 ] && cd $DIR2 && sync; sleep 1; sync
1751 export base=`basetest $1`
1752 [ "$CHECK_GRANT" == "no" ] && return 0
1754 testname=GCHECK_ONLY_${base}
1755 [ ${!testname}x == x ] && return 0
1757 echo -n "checking grant......"
1759 # write some data to sync client lost_grant
1760 rm -f $DIR1/${tfile}_check_grant_* 2>&1
1761 for i in `seq $OSTCOUNT`; do
1762 $LFS setstripe $DIR1/${tfile}_check_grant_$i -i $(($i -1)) -c 1
1763 dd if=/dev/zero of=$DIR1/${tfile}_check_grant_$i bs=4k \
1764 count=1 > /dev/null 2>&1
1766 # sync all the data and make sure no pending data on server
1769 #get client grant and server grant
1771 for d in `lctl get_param -n osc.*.cur_grant_bytes`; do
1772 client_grant=$((client_grant + $d))
1775 for d in `lctl get_param -n obdfilter.*.tot_granted`; do
1776 server_grant=$((server_grant + $d))
1779 # cleanup the check_grant file
1780 for i in `seq $OSTCOUNT`; do
1781 rm $DIR1/${tfile}_check_grant_$i
1784 #check whether client grant == server grant
1785 if [ $client_grant != $server_grant ]; then
1786 echo "failed: client:${client_grant} server: ${server_grant}"
1793 ########################
1799 ost=`echo $1 | awk -F_ '{print $3}'`
1800 if [ -z $ost ]; then
1801 ost=`echo $1 | sed 's/-osc.*//'`
1808 [ "$node" != "$(hostname)" ]
1814 for node in $(mdts_nodes); do
1815 remote_node $node && return 0
1822 remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
1828 for node in $(osts_nodes) ; do
1829 remote_node $node && return 0
1836 remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
1842 for num in `seq $MDSCOUNT`; do
1843 MDSNODES="$MDSNODES $(facet_host mds$num)"
1845 NODES_sort=$(for i in $MDSNODES; do echo $i; done | sort -u)
1851 remote_ost && remote_mds
1855 local OSTNODES=$(facet_host ost1)
1858 for num in `seq $OSTCOUNT`; do
1859 local myOST=$(facet_host ost$num)
1860 OSTNODES="$OSTNODES $myOST"
1862 NODES_sort=$(for i in $OSTNODES; do echo $i; done | sort -u)
1868 # FIXME. We need a list of clients
1869 local myNODES=$HOSTNAME
1872 # CLIENTS (if specified) contains the local client
1873 [ -n "$CLIENTS" ] && myNODES=${CLIENTS//,/ }
1875 if [ "$PDSH" -a "$PDSH" != "no_dsh" ]; then
1876 myNODES="$myNODES $(osts_nodes) $(mdts_nodes)"
1879 myNODES_sort=$(for i in $myNODES; do echo $i; done | sort -u)
1884 remote_nodes_list () {
1885 local rnodes=$(nodes_list)
1886 rnodes=$(echo " $rnodes " | sed -re "s/\s+$HOSTNAME\s+/ /g")
1890 init_clients_lists () {
1891 # Sanity check: exclude the local client from RCLIENTS
1892 local rclients=$(echo " $RCLIENTS " | sed -re "s/\s+$HOSTNAME\s+/ /g")
1894 # Sanity check: exclude the dup entries
1895 rclients=$(for i in $rclients; do echo $i; done | sort -u)
1897 local clients="$SINGLECLIENT $HOSTNAME $rclients"
1899 # Sanity check: exclude the dup entries from CLIENTS
1900 # for those configs which has SINGLCLIENT set to local client
1901 clients=$(for i in $clients; do echo $i; done | sort -u)
1903 CLIENTS=`comma_list $clients`
1904 local -a remoteclients=($rclients)
1905 for ((i=0; $i<${#remoteclients[@]}; i++)); do
1906 varname=CLIENT$((i + 2))
1907 eval $varname=${remoteclients[i]}
1910 CLIENTCOUNT=$((${#remoteclients[@]} + 1))
1915 lctl get_param version | grep -q patchless
1920 echo $nodes | wc -w || true
1924 local nodes=$(osts_nodes)
1925 local osscount=$(get_node_count "$nodes")
1926 [ ! "$OSTCOUNT" = "$osscount" ]
1929 generate_machine_file() {
1930 local nodes=${1//,/ }
1931 local machinefile=$2
1932 rm -f $machinefile || error "can't rm $machinefile"
1933 for node in $nodes; do
1934 echo $node >>$machinefile
1939 local file=$1/stripe
1941 $LFS getstripe -v $file || error
1945 check_runas_id_ret() {
1950 if [ -z "$myRUNAS" ]; then
1951 error_exit "myRUNAS command must be specified for check_runas_id"
1954 $myRUNAS krb5_login.sh || \
1955 error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
1957 mkdir $DIR/d0_runas_test
1959 chown $myRUNAS_ID:$myRUNAS_ID $DIR/d0_runas_test
1960 $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
1961 rm -rf $DIR/d0_runas_test
1969 check_runas_id_ret $myRUNAS_ID $myRUNAS || \
1970 error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_ID.
1971 Please set RUNAS_ID to some UID which exists on MDS and client or
1972 add user $myRUNAS_ID:$myRUNAS_ID on these nodes."
1975 # Run multiop in the background, but wait for it to print
1976 # "PAUSING" to its stdout before returning from this function.
1977 multiop_bg_pause() {
1978 MULTIOP_PROG=${MULTIOP_PROG:-multiop}
1982 TMPPIPE=/tmp/multiop_open_wait_pipe.$$
1985 echo "$MULTIOP_PROG $FILE v$ARGS"
1986 $MULTIOP_PROG $FILE v$ARGS > $TMPPIPE &
1988 echo "TMPPIPE=${TMPPIPE}"
1989 read -t 60 multiop_output < $TMPPIPE
1990 if [ $? -ne 0 ]; then
1995 if [ "$multiop_output" != "PAUSING" ]; then
1996 echo "Incorrect multiop output: $multiop_output"
2006 local TARGET_RATE=$2
2007 local NUM_CLIENTS=$3
2010 local RATE=$(awk '/^Rate: [0-9\.]+ '"${OP}"'s\/sec/ { print $2}' ${LOG})
2012 # We need to use bc since the rate is a floating point number
2013 local RES=$(echo "${RATE} < ${TARGET_RATE}" | bc -l )
2014 if [ ${RES} -eq 0 ]; then
2015 echo "Success: ${RATE} ${OP}s/sec met target rate" \
2016 "${TARGET_RATE} ${OP}s/sec for ${NUM_CLIENTS} client(s)."
2019 echo "Failure: ${RATE} ${OP}s/sec did not meet target rate" \
2020 "${TARGET_RATE} ${OP}s/sec for ${NUM_CLIENTS} client(s)."
2025 # reset llite stat counters
2026 clear_llite_stats(){
2027 lctl set_param -n llite.*.stats 0
2030 # sum llite stat items
2031 calc_llite_stats() {
2032 local res=$(lctl get_param -n llite.*.stats |
2033 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
2038 awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
2041 calc_osc_kbytes () {
2042 $LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
2045 # save_lustre_params(node, parameter_mask)
2046 # generate a stream of formatted strings (<node> <param name>=<param value>)
2047 save_lustre_params() {
2049 do_node $1 "lctl get_param $2" | while read s; do echo "$1 $s"; done
2052 # restore lustre parameters from input stream, produces by save_lustre_params
2053 restore_lustre_params() {
2057 while IFS=" =" read node name val; do
2058 do_node $node "lctl set_param -n $name $val"
2062 check_catastrophe () {
2063 local rnodes=$(comma_list $(remote_nodes_list))
2065 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && return 1
2066 if [ $rnodes ]; then
2067 do_nodes $rnodes "[ -f $CATASTROPHE ] && { [ \`cat $CATASTROPHE\` -eq 0 ] || false; } || true"