3 trap 'print_summary && touch $TF_FAIL && \
4 echo "test-framework exiting on error"' ERR
8 export EJOURNAL=${EJOURNAL:-""}
9 export REFORMAT=${REFORMAT:-""}
10 export WRITECONF=${WRITECONF:-""}
11 export VERBOSE=${VERBOSE:-false}
12 export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
15 export GSS_PIPEFS=false
16 export IDENTITY_UPCALL=default
18 export JOBSTATS_AUTO=${JOBSTATS_AUTO:-1}
19 export JOBID_VAR=${JOBID_VAR:-"procname_uid"}
21 # LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
22 # LOAD_LLOOP is true. LOAD_LLOOP is false by default.
23 export LOAD_LLOOP=${LOAD_LLOOP:-false}
25 #export PDSH="pdsh -S -Rssh -w"
27 # function used by scripts run on remote nodes
28 LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
29 . $LUSTRE/tests/functions.sh
30 . $LUSTRE/tests/yaml.sh
32 export LD_LIBRARY_PATH=${LUSTRE}/utils:${LD_LIBRARY_PATH}
34 LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
36 EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
38 if [ -f "$EXCEPT_LIST_FILE" ]; then
39 echo "Reading test skip list from $EXCEPT_LIST_FILE"
44 # check config files for options in decreasing order of preference
45 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/lustre.conf ] &&
46 MODPROBECONF=/etc/modprobe.d/lustre.conf
47 [ -z "$MODPROBECONF" -a -f /etc/modprobe.d/Lustre ] &&
48 MODPROBECONF=/etc/modprobe.d/Lustre
49 [ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
50 MODPROBECONF=/etc/modprobe.conf
54 [[ $DIR/ = $MOUNT/* ]] || \
55 { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
56 [[ $DIR1/ = $MOUNT1/* ]] || \
57 { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
58 [[ $DIR2/ = $MOUNT2/* ]] || \
59 { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
61 [ -n "$failed" ] && exit 99 || true
65 echo "usage: $0 [-r] [-f cfgfile]"
73 [ "$TESTSUITE" == "lfsck" ] && return 0
74 [ -n "$ONLY" ] && echo "WARNING: ONLY is set to $(echo $ONLY)"
76 local form="%-13s %-17s %-9s %s %s\n"
77 printf "$form" "status" "script" "Total(sec)" "E(xcluded) S(low)"
78 echo "------------------------------------------------------------------------------------"
79 for O in $DEFAULT_SUITES; do
80 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
81 [ "${!O}" = "no" ] && continue || true
82 local o=$(echo $O | tr "[:upper:]_" "[:lower:]-")
83 local log=${TMP}/${o}.log
84 if is_sanity_benchmark $o; then
85 log=${TMP}/sanity-benchmark.log
90 local status=Unfinished
92 skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
93 slow=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | sort -nr -k 3 | head -5 | awk '{ print $2":"$3"s" }')
94 total=$(grep duration $log | awk '{ print $2}')
95 if [ "${!O}" = "done" ]; then
99 local durations=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | awk '{ print $2":"$3"|" }')
100 details=$(printf "%s\n%s %s %s\n" "$details" "DDETAILS" "$O" "$(echo $durations)")
103 printf "$form" $status "$O" "${total}" "E=$skipped"
104 printf "$form" "-" "-" "-" "S=$(echo $slow)"
107 for O in $DEFAULT_SUITES; do
108 O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
109 if [ "${!O}" = "no" ]; then
110 printf "$form" "Skipped" "$O" ""
114 # print the detailed tests durations if DDETAILS=true
121 export LUSTRE=`absolute_path $LUSTRE`
122 export TESTSUITE=`basename $0 .sh`
123 export TEST_FAILED=false
124 export FAIL_ON_SKIP_ENV=${FAIL_ON_SKIP_ENV:-false}
126 export MKE2FS=$MKE2FS
127 if [ -z "$MKE2FS" ]; then
128 if which mkfs.ldiskfs >/dev/null 2>&1; then
129 export MKE2FS=mkfs.ldiskfs
135 export DEBUGFS=$DEBUGFS
136 if [ -z "$DEBUGFS" ]; then
137 if which debugfs.ldiskfs >/dev/null 2>&1; then
138 export DEBUGFS=debugfs.ldiskfs
140 export DEBUGFS=debugfs
144 export TUNE2FS=$TUNE2FS
145 if [ -z "$TUNE2FS" ]; then
146 if which tunefs.ldiskfs >/dev/null 2>&1; then
147 export TUNE2FS=tunefs.ldiskfs
149 export TUNE2FS=tune2fs
153 export E2LABEL=$E2LABEL
154 if [ -z "$E2LABEL" ]; then
155 if which label.ldiskfs >/dev/null 2>&1; then
156 export E2LABEL=label.ldiskfs
158 export E2LABEL=e2label
162 export DUMPE2FS=$DUMPE2FS
163 if [ -z "$DUMPE2FS" ]; then
164 if which dumpfs.ldiskfs >/dev/null 2>&1; then
165 export DUMPE2FS=dumpfs.ldiskfs
167 export DUMPE2FS=dumpe2fs
171 export E2FSCK=$E2FSCK
172 if [ -z "$E2FSCK" ]; then
173 if which fsck.ldiskfs >/dev/null 2>&1; then
174 export E2FSCK=fsck.ldiskfs
180 export LFSCK_BIN=${LFSCK_BIN:-lfsck}
181 export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
182 export FSCK_MAX_ERR=4 # File system errors left uncorrected
184 export ZFS=${ZFS:-zfs}
185 export ZPOOL=${ZPOOL:-zpool}
186 export ZDB=${ZDB:-zdb}
188 #[ -d /r ] && export ROOT=${ROOT:-/r}
189 export TMP=${TMP:-$ROOT/tmp}
190 export TESTSUITELOG=${TMP}/${TESTSUITE}.log
191 export LOGDIR=${LOGDIR:-${TMP}/test_logs/$(date +%s)}
192 export TESTLOG_PREFIX=$LOGDIR/$TESTSUITE
194 export HOSTNAME=${HOSTNAME:-$(hostname -s)}
195 if ! echo $PATH | grep -q $LUSTRE/utils; then
196 export PATH=$LUSTRE/utils:$PATH
198 if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
199 export PATH=$LUSTRE/utils/gss:$PATH
201 if ! echo $PATH | grep -q $LUSTRE/tests; then
202 export PATH=$LUSTRE/tests:$PATH
204 if ! echo $PATH | grep -q $LUSTRE/../lustre-iokit/sgpdd-survey; then
205 export PATH=$LUSTRE/../lustre-iokit/sgpdd-survey:$PATH
207 export LST=${LST:-"$LUSTRE/../lnet/utils/lst"}
208 [ ! -f "$LST" ] && export LST=$(which lst)
209 export SGPDDSURVEY=${SGPDDSURVEY:-"$LUSTRE/../lustre-iokit/sgpdd-survey/sgpdd-survey")}
210 [ ! -f "$SGPDDSURVEY" ] && export SGPDDSURVEY=$(which sgpdd-survey)
211 # Ubuntu, at least, has a truncate command in /usr/bin
212 # so fully path our truncate command.
213 export TRUNCATE=${TRUNCATE:-$LUSTRE/tests/truncate}
214 export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
215 [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
216 if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
217 export PATH=$LUSTRE/tests/racer:$PATH:
219 if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
220 export PATH=$LUSTRE/tests/mpi:$PATH
222 export RSYNC_RSH=${RSYNC_RSH:-rsh}
224 export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
225 [ ! -f "$LCTL" ] && export LCTL=$(which lctl)
226 export LFS=${LFS:-"$LUSTRE/utils/lfs"}
227 [ ! -f "$LFS" ] && export LFS=$(which lfs)
228 SETSTRIPE=${SETSTRIPE:-"$LFS setstripe"}
229 GETSTRIPE=${GETSTRIPE:-"$LFS getstripe"}
231 export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
232 if [ ! -f "$L_GETIDENTITY" ]; then
233 if `which l_getidentity > /dev/null 2>&1`; then
234 export L_GETIDENTITY=$(which l_getidentity)
236 export L_GETIDENTITY=NONE
239 export LL_DECODE_FILTER_FID=${LL_DECODE_FILTER_FID:-"$LUSTRE/utils/ll_decode_filter_fid"}
240 [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID="ll_decode_filter_fid"
241 export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
242 [ ! -f "$MKFS" ] && export MKFS="mkfs.lustre"
243 export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
244 [ ! -f "$TUNEFS" ] && export TUNEFS="tunefs.lustre"
245 export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
246 export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
247 [ ! -f "$LUSTRE_RMMOD" ] &&
248 export LUSTRE_RMMOD=$(which lustre_rmmod 2> /dev/null)
249 export LFS_MIGRATE=${LFS_MIGRATE:-$LUSTRE/scripts/lfs_migrate}
250 [ ! -f "$LFS_MIGRATE" ] &&
251 export LFS_MIGRATE=$(which lfs_migrate 2> /dev/null)
252 export NAME=${NAME:-local}
253 export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
254 [ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
255 export LGSSD=$(which lgssd)
256 export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
257 [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd 2> /dev/null)
258 export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
260 export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
263 if [ "$ACCEPTOR_PORT" ]; then
264 export PORT_OPT="--port $ACCEPTOR_PORT"
269 echo "Using GSS/krb5 ptlrpc security flavor"
270 which lgss_keyring > /dev/null 2>&1 || \
271 error_exit "built with gss disabled! SEC=$SEC"
282 IDENTITY_UPCALL=false
286 export LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
288 # Paths on remote nodes, if different
289 export RLUSTRE=${RLUSTRE:-$LUSTRE}
290 export RPWD=${RPWD:-$PWD}
291 export I_MOUNTED=${I_MOUNTED:-"no"}
292 if [ ! -f /lib/modules/$(uname -r)/kernel/fs/lustre/mdt.ko -a \
293 ! -f /lib/modules/$(uname -r)/updates/kernel/fs/lustre/mdt.ko -a \
294 ! -f `dirname $0`/../mdt/mdt.ko ]; then
295 export CLIENTMODSONLY=yes
298 export SHUTDOWN_ATTEMPTS=${SHUTDOWN_ATTEMPTS:-3}
302 while getopts "rvwf:" opt $*; do
305 r) REFORMAT=--reformat;;
307 w) WRITECONF=writeconf;;
312 shift $((OPTIND - 1))
315 # print the durations of each test if "true"
316 DDETAILS=${DDETAILS:-false}
317 [ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
325 ncpts=$(do_facet $facet "lctl get_param -n " \
326 "cpu_partition_table 2>/dev/null| wc -l" || echo 1)
328 if [ $ncpts -eq 0 ]; then
336 # split arguments like "1.8.6-wc3" into "1", "8", "6", "wc3"
337 eval set -- $(tr "[:punct:]" " " <<< $*)
339 echo -n "$((($1 << 16) | ($2 << 8) | $3))"
342 export LINUX_VERSION=$(uname -r | sed -e "s/[-.]/ /3" -e "s/ .*//")
343 export LINUX_VERSION_CODE=$(version_code ${LINUX_VERSION//\./ })
346 /sbin/lsmod | grep -q "^\<$1\>"
349 # Load a module on the system where this is running.
351 # Synopsis: load_module module_name [module arguments for insmod/modprobe]
353 # If module arguments are not given but MODOPTS_<MODULE> is set, then its value
354 # will be used as the arguments. Otherwise arguments will be obtained from
355 # /etc/modprobe.conf, from /etc/modprobe.d/Lustre, or else none will be used.
362 BASE=`basename $module $EXT`
364 module_loaded ${BASE} && return
366 # If no module arguments were passed, get them from $MODOPTS_<MODULE>, else from
368 if [ $# -eq 0 ]; then
369 # $MODOPTS_<MODULE>; we could use associative arrays, but that's not in
370 # Bash until 4.x, so we resort to eval.
371 optvar="MODOPTS_$(basename $module | tr a-z A-Z)"
372 eval set -- \$$optvar
373 if [ $# -eq 0 -a -n "$MODPROBECONF" ]; then
374 # Nothing in $MODOPTS_<MODULE>; try modprobe.conf
376 opt=$(awk -v var="^options $BASE" '$0 ~ var \
377 {gsub("'"options $BASE"'",""); print}' $MODPROBECONF)
378 set -- $(echo -n $opt)
380 # Ensure we have accept=all for lnet
381 if [ $(basename $module) = lnet ]; then
382 # OK, this is a bit wordy...
383 local arg accept_all_present=false
386 [ "$arg" = accept=all ] && \
387 accept_all_present=true
389 $accept_all_present || set -- "$@" accept=all
395 [ $# -gt 0 ] && echo "${module} options: '$*'"
397 # Note that insmod will ignore anything in modprobe.conf, which is why we're
398 # passing options on the command-line.
399 if [ "$BASE" == "lnet_selftest" ] && \
400 [ -f ${LUSTRE}/../lnet/selftest/${module}${EXT} ]; then
401 insmod ${LUSTRE}/../lnet/selftest/${module}${EXT}
402 elif [ -f ${LUSTRE}/${module}${EXT} ]; then
403 insmod ${LUSTRE}/${module}${EXT} "$@"
405 # must be testing a "make install" or "rpm" installation
406 # note failed to load ptlrpc_gss is considered not fatal
407 if [ "$BASE" == "ptlrpc_gss" ]; then
408 modprobe $BASE "$@" 2>/dev/null || echo "gss/krb5 is not supported"
415 llite_lloop_enabled() {
416 local n1=$(uname -r | cut -d. -f1)
417 local n2=$(uname -r | cut -d. -f2)
418 local n3=$(uname -r | cut -d- -f1 | cut -d. -f3)
420 # load the llite_lloop module for < 2.6.32 kernels
421 if [[ $n1 -lt 2 ]] || [[ $n1 -eq 2 && $n2 -lt 6 ]] || \
422 [[ $n1 -eq 2 && $n2 -eq 6 && $n3 -lt 32 ]] || \
429 load_modules_local() {
430 if [ -n "$MODPROBE" ]; then
432 echo "Using modprobe to load modules"
436 echo Loading modules from $LUSTRE
440 if [ -f /sys/devices/system/cpu/online ]; then
441 ncpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/online) + 1))
442 echo "detected $ncpus online CPUs by sysfs"
444 ncpus=$(getconf _NPROCESSORS_CONF 2>/dev/null)
446 if [ $rc -eq 0 ]; then
447 echo "detected $ncpus online CPUs by getconf"
449 echo "Can't detect number of CPUs"
454 # if there is only one CPU core, libcfs can only create one partition
455 # if there is more than 4 CPU cores, libcfs should create multiple CPU
456 # partitions. So we just force libcfs to create 2 partitions for
457 # system with 2 or 4 cores
458 if [ $ncpus -le 4 ] && [ $ncpus -gt 1 ]; then
459 # force to enable multiple CPU partitions
460 echo "Force libcfs to create 2 CPU partitions"
461 MODOPTS_LIBCFS="cpu_npartitions=2 $MODOPTS_LIBCFS"
463 echo "libcfs will create CPU partition based on online CPUs"
466 load_module ../libcfs/libcfs/libcfs
468 [ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
469 [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
470 load_module ../lnet/lnet/lnet
471 LNETLND=${LNETLND:-"socklnd/ksocklnd"}
472 load_module ../lnet/klnds/$LNETLND
473 load_module lvfs/lvfs
474 load_module obdclass/obdclass
475 load_module ptlrpc/ptlrpc
476 load_module ptlrpc/gss/ptlrpc_gss
484 load_module obdecho/obdecho
485 if ! client_only; then
486 SYMLIST=/proc/kallsyms
487 grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
488 grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
489 grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
490 [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
491 if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
493 load_module osd-zfs/osd_zfs
497 if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
499 # This block shall be moved up beside osd-zfs as soon
500 # as osd-ldiskfs stops using mdd symbols.
502 grep -q exportfs_decode_fh $SYMLIST ||
503 { modprobe exportfs 2> /dev/null || true; }
504 load_module ../ldiskfs/ldiskfs/ldiskfs
505 load_module lvfs/fsfilt_ldiskfs
506 load_module osd-ldiskfs/osd_ldiskfs
517 load_module llite/lustre
518 llite_lloop_enabled && load_module llite/llite_lloop
519 [ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
521 rm -f $OGDB/ogdb-$HOSTNAME
522 $LCTL modules > $OGDB/ogdb-$HOSTNAME
524 # 'mount' doesn't look in $PATH, just sbin
525 if [ -f $LUSTRE/utils/mount.lustre ] && \
526 ! grep -qe "/sbin/mount\.lustre " /proc/mounts; then
527 [ ! -f /sbin/mount.lustre ] && touch /sbin/mount.lustre
528 mount --bind $LUSTRE/utils/mount.lustre /sbin/mount.lustre || true
535 # load modules on remote nodes optionally
536 # lustre-tests have to be installed on these nodes
537 if $LOAD_MODULES_REMOTE; then
538 local list=$(comma_list $(remote_nodes_list))
539 if [ -n "$list" ]; then
540 echo "loading modules on: '$list'"
541 do_rpc_nodes "$list" load_modules_local
547 LEAK_LUSTRE=$(dmesg | tail -n 30 | grep "obd_memory.*leaked" || true)
548 LEAK_PORTALS=$(dmesg | tail -n 20 | grep "Portals memory leaked" || true)
549 if [ "$LEAK_LUSTRE" -o "$LEAK_PORTALS" ]; then
550 echo "$LEAK_LUSTRE" 1>&2
551 echo "$LEAK_PORTALS" 1>&2
552 mv $TMP/debug $TMP/debug-leak.`date +%s` || true
553 echo "Memory leaks detected"
554 [ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
560 wait_exit_ST client # bug 12845
562 $LUSTRE_RMMOD ldiskfs || return 2
564 if $LOAD_MODULES_REMOTE; then
565 local list=$(comma_list $(remote_nodes_list))
566 if [ -n "$list" ]; then
567 echo "unloading modules on: '$list'"
568 do_rpc_nodes "$list" $LUSTRE_RMMOD ldiskfs
569 do_rpc_nodes "$list" check_mem_leak
573 if grep -qe "/sbin/mount\.lustre" /proc/mounts; then
574 umount /sbin/mount.lustre || true
575 [ -w /sbin/mount.lustre -a ! -s /sbin/mount.lustre ] && \
576 rm -f /sbin/mount.lustre || true
579 check_mem_leak || return 254
581 echo "modules unloaded."
585 check_gss_daemon_nodes() {
589 do_nodesv $list "num=\\\$(ps -o cmd -C $dname | grep $dname | wc -l);
590 if [ \\\"\\\$num\\\" -ne 1 ]; then
591 echo \\\$num instance of $dname;
596 check_gss_daemon_facet() {
600 num=`do_facet $facet ps -o cmd -C $dname | grep $dname | wc -l`
601 if [ $num -ne 1 ]; then
602 echo "$num instance of $dname on $facet"
611 echo Stopping $@ on $list
612 do_nodes $list "killall -2 $@ 2>/dev/null || true"
615 # start gss daemons on all nodes, or
616 # "daemon" on "list" if set
617 start_gss_daemons() {
621 if [ "$list" ] && [ "$daemon" ] ; then
622 echo "Starting gss daemon on nodes: $list"
623 do_nodes $list "$daemon" || return 8
627 local list=$(comma_list $(mdts_nodes))
629 echo "Starting gss daemon on mds: $list"
630 do_nodes $list "$LSVCGSSD -v" || return 1
632 do_nodes $list "$LGSSD -v" || return 2
635 list=$(comma_list $(osts_nodes))
636 echo "Starting gss daemon on ost: $list"
637 do_nodes $list "$LSVCGSSD -v" || return 3
638 # starting on clients
640 local clients=${CLIENTS:-`hostname`}
642 echo "Starting $LGSSD on clients $clients "
643 do_nodes $clients "$LGSSD -v" || return 4
646 # wait daemons entering "stable" status
650 # check daemons are running
652 list=$(comma_list $(mdts_nodes) $(osts_nodes))
653 check_gss_daemon_nodes $list lsvcgssd || return 5
655 list=$(comma_list $(mdts_nodes))
656 check_gss_daemon_nodes $list lgssd || return 6
659 check_gss_daemon_nodes $clients lgssd || return 7
664 local list=$(comma_list $(mdts_nodes))
666 send_sigint $list lsvcgssd lgssd
668 list=$(comma_list $(osts_nodes))
669 send_sigint $list lsvcgssd
671 list=${CLIENTS:-`hostname`}
672 send_sigint $list lgssd
677 if ! module_loaded ptlrpc_gss; then
678 load_module ptlrpc/gss/ptlrpc_gss
679 module_loaded ptlrpc_gss ||
680 error_exit "init_gss : GSS=$GSS, but gss/krb5 is not supported!"
682 start_gss_daemons || error_exit "start gss daemon failed! rc=$?"
684 if [ -n "$LGSS_KEYRING_DEBUG" ]; then
685 echo $LGSS_KEYRING_DEBUG > /proc/fs/lustre/sptlrpc/gss/lgss_keyring/debug_level
693 # maybe cleanup credential cache?
700 echo -n $facet | sed -e 's/^fs[0-9]\+//' -e 's/[0-9_]\+//' |
701 tr '[:lower:]' '[:upper:]'
707 if [ $facet == mgs ]; then
711 echo -n $facet | sed -e 's/^fs[0-9]\+//' | sed -e 's/^[a-z]\+//'
719 if [ -n "${!var}" ]; then
724 var=$(facet_type $facet)FSTYPE
725 if [ -n "${!var}" ]; then
730 if [ -n "$FSTYPE" ]; then
742 local facets=$(get_facets)
745 for facet in ${facets//,/ }; do
746 if [ $node == $(facet_host $facet) ] ||
747 [ $node == "$(facet_failover_host $facet)" ]; then
748 fstype=$(facet_fstype $facet)
749 if [[ $fstypes != *$fstype* ]]; then
750 fstypes+="${fstypes:+,}$fstype"
761 local fstype=$(facet_fstype $facet)
765 label=$(do_facet ${facet} "$E2LABEL ${dev} 2>/dev/null");;
767 label=$(do_facet ${facet} "$ZFS get -H -o value lustre:svname \
768 ${dev} 2>/dev/null");;
770 error "unknown fstype!";;
778 local device=$(mdsdevname $num)
779 local label=$(devicelabel mds$num ${device} | grep -v "CMD: ")
785 local device=$(ostdevname $num)
786 local label=$(devicelabel ost$num ${device} | grep -v "CMD: ")
791 # This and set_obdfilter_param() shall be used to access OSD parameters
792 # once existed under "obdfilter":
797 # writethrough_cache_enable
799 get_obdfilter_param() {
801 local device=${2:-$FSNAME-OST*}
804 do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
805 osd-*.$device.$name 2>&1" | grep -v 'Found no match'
808 set_obdfilter_param() {
810 local device=${2:-$FSNAME-OST*}
814 do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
815 osd-*.$device.$name=$value 2>&1" | grep -v 'Found no match'
819 local dz=${1:-$DEBUG_SIZE}
821 if [ -f /sys/devices/system/cpu/possible ]; then
822 local cpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/possible)+1))
824 local cpus=$(getconf _NPROCESSORS_CONF)
827 # bug 19944, adjust size to be -gt num_possible_cpus()
828 # promise 2MB for every cpu at least
829 if [ -n "$cpus" ] && [ $((cpus * 2)) -gt $dz ]; then
832 lctl set_param debug_mb=$dz
835 set_default_debug () {
836 local debug=${1:-"$PTLDEBUG"}
837 local subsys=${2:-"$SUBSYSTEM"}
838 local debug_size=${3:-$DEBUG_SIZE}
840 [ -n "$debug" ] && lctl set_param debug="$debug" >/dev/null
841 [ -n "$subsys" ] && lctl set_param subsystem_debug="${subsys# }" >/dev/null
843 [ -n "$debug_size" ] && set_debug_size $debug_size > /dev/null
846 set_default_debug_nodes () {
849 if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
850 nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
854 do_rpc_nodes "$nodes" set_default_debug \
855 \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
858 set_default_debug_facet () {
860 local node=$(facet_active_host $facet)
861 [ -z "$node" ] && echo "No host defined for facet $facet" && exit 1
863 set_default_debug_nodes $node
868 local facets=${1:-$(get_facets)}
871 for facet in ${facets//,/ }; do
874 [ $RC -eq 0 ] && continue
876 if [ "$TESTSUITE.$TESTNAME" = "replay-dual.test_0a" ]; then
877 skip "Restart of $facet failed!." && touch $LU482_FAILED
879 error "Restart of $facet failed!"
886 # Add argument "arg" (e.g., "loop") to the comma-separated list
887 # of arguments for option "opt" (e.g., "-o") on command
888 # line "opts" (e.g., "-o flock").
894 local opt_pattern="\([[:space:]]\+\|^\)$opt"
896 if echo "$opts" | grep -q $opt_pattern; then
897 opts=$(echo "$opts" | sed -e \
898 "s/$opt_pattern[[:space:]]*[^[:space:]]\+/&,$arg/")
900 opts+="${opts:+ }$opt $arg"
908 local dev=$(facet_active $facet)_dev
909 local opt=${facet}_opt
910 local mntpt=$(facet_mntpt $facet)
911 local opts="${!opt} $@"
913 if [ $(facet_fstype $facet) == ldiskfs ] &&
914 ! do_facet $facet test -b ${!dev}; then
915 opts=$(csa_add "$opts" -o loop)
918 echo "Starting ${facet}: $opts ${!dev} $mntpt"
919 # for testing LU-482 error handling in mount_facets() and test_0a()
920 if [ -f $TMP/test-lu482-trigger ]; then
923 do_facet ${facet} "mkdir -p $mntpt; mount -t lustre $opts \
927 if [ $RC -ne 0 ]; then
928 echo "Start of ${!dev} on ${facet} failed ${RC}"
930 set_default_debug_facet $facet
932 label=$(devicelabel ${facet} ${!dev})
933 [ -z "$label" ] && echo no label for ${!dev} && exit 1
934 eval export ${facet}_svc=${label}
935 echo Started ${label}
940 # start facet device options
946 eval export ${facet}_dev=${device}
947 eval export ${facet}_opt=\"$@\"
949 local varname=${facet}failover_dev
950 if [ -n "${!varname}" ] ; then
951 eval export ${facet}failover_dev=${!varname}
953 eval export ${facet}failover_dev=$device
956 local mntpt=$(facet_mntpt $facet)
957 do_facet ${facet} mkdir -p $mntpt
958 eval export ${facet}_MOUNT=$mntpt
965 # When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
966 # Because stopping corresponding target may not clear this in-memory state, we
967 # need to zap the pool from memory by exporting and reimporting the pool.
969 # Although the uberblocks are not updated when a pool is freezed, transactions
970 # are still written to the disks. Modified blocks may be cached in memory when
971 # tests try reading them back. The export-and-reimport process also evicts any
972 # cached pool data from memory to provide the correct "data loss" semantics.
976 local fstype=$(facet_fstype $facet)
981 if [ "${fstype}" == "zfs" ]; then
982 _dev=$(facet_active $facet)_dev
983 dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
984 poolname="${dev%%/*}" # poolname is string before "/"
986 if [ "${poolname}" == "" ]; then
987 echo "invalid dataset name: $dev"
990 do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
991 do_facet $facet "$ZPOOL export ${poolname}"
992 do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
1001 local HOST=`facet_active_host $facet`
1002 [ -z $HOST ] && echo stop: no host for $facet && return 0
1004 local mntpt=$(facet_mntpt $facet)
1005 running=$(do_facet ${facet} "grep -c $mntpt' ' /proc/mounts") || true
1006 if [ ${running} -ne 0 ]; then
1007 echo "Stopping $mntpt (opts:$@) on $HOST"
1008 do_facet ${facet} umount -d $@ $mntpt
1011 # umount should block, but we should wait for unrelated obd's
1012 # like the MGS or MGC to also stop.
1013 wait_exit_ST ${facet}
1016 # save quota version (both administrative and operational quotas)
1017 # add an additional parameter if mountpoint is ever different from $MOUNT
1019 # XXX This function is kept for interoperability with old server (< 2.3.50),
1020 # it should be removed whenever we drop the interoperability for such
1022 quota_save_version() {
1023 local fsname=${2:-$FSNAME}
1025 local ver=$(tr -c -d "123" <<< $spec)
1026 local type=$(tr -c -d "ug" <<< $spec)
1028 [ -n "$ver" -a "$ver" != "3" ] && error "wrong quota version specifier"
1030 [ -n "$type" ] && { $LFS quotacheck -$type $MOUNT || error "quotacheck has failed"; }
1032 do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$spec"
1034 local osts=$(get_facets OST)
1035 for ost in ${osts//,/ }; do
1037 do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$spec"
1041 # client could mount several lustre
1043 # XXX This function is kept for interoperability with old server (< 2.3.50),
1044 # it should be removed whenever we drop the interoperability for such
1047 local fsname=${1:-$FSNAME}
1049 do_facet $SINGLEMDS lctl get_param mdd.${fsname}-MDT*.quota_type ||
1051 do_nodes $(comma_list $(osts_nodes)) \
1052 lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
1056 # XXX This function is kept for interoperability with old server (< 2.3.50),
1057 # it should be removed whenever we drop the interoperability for such
1059 restore_quota_old() {
1060 local mntpt=${1:-$MOUNT}
1061 local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
1062 if [ ! "$old_QUOTA_TYPE" ] ||
1063 [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
1066 quota_save_version $old_QUOTA_TYPE
1069 # XXX This function is kept for interoperability with old server (< 2.3.50),
1070 # it should be removed whenever we drop the interoperability for such
1075 # no quota enforcement for now and accounting works out of the box
1078 # We need save the original quota_type params, and restore them after testing
1080 # Suppose that quota type the same on mds and ost
1081 local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
1082 [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
1083 echo "[HOST:$HOSTNAME] [old_quota_type:$quota_type] [new_quota_type:$QUOTA_TYPE]"
1084 if [ "$quota_type" != "$QUOTA_TYPE" ]; then
1085 export old_QUOTA_TYPE=$quota_type
1086 quota_save_version $QUOTA_TYPE
1088 qtype=$(tr -c -d "ug" <<< $QUOTA_TYPE)
1089 $LFS quotacheck -$qtype $mntpt || error "quotacheck has failed for $type"
1092 local quota_usrs=$QUOTA_USERS
1094 # get_filesystem_size
1095 local disksz=$(lfs_df $mntpt | grep "summary" | awk '{print $2}')
1096 local blk_soft=$((disksz + 1024))
1097 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
1099 local Inodes=$(lfs_df -i $mntpt | grep "summary" | awk '{print $2}')
1100 local i_soft=$Inodes
1101 local i_hard=$((i_soft + i_soft / 20))
1103 echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
1104 $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
1107 for usr in $quota_usrs; do
1108 echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
1110 cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
1112 eval $cmd || error "$cmd FAILED!"
1114 # display the quota status
1115 echo "Quota settings for $usr : "
1116 $LFS quota -v -u $usr $mntpt || true
1120 # get mdt quota type
1122 local varsvc=${SINGLEMDS}_svc
1123 do_facet $SINGLEMDS $LCTL get_param -n \
1124 osd-$(facet_fstype $SINGLEMDS).${!varsvc}.quota_slave.enabled
1127 # get ost quota type
1129 # All OSTs should have same quota type
1130 local varsvc=ost1_svc
1131 do_facet ost1 $LCTL get_param -n \
1132 osd-$(facet_fstype ost1).${!varsvc}.quota_slave.enabled
1135 # restore old quota type settings
1137 if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
1142 if [ "$old_MDT_QUOTA_TYPE" ]; then
1143 do_facet mgs $LCTL conf_param \
1144 $FSNAME.quota.mdt=$old_MDT_QUOTA_TYPE
1146 if [ "$old_OST_QUOTA_TYPE" ]; then
1147 do_facet mgs $LCTL conf_param \
1148 $FSNAME.quota.ost=$old_OST_QUOTA_TYPE
1152 # Handle the case when there is a space in the lfs df
1153 # "filesystem summary" line the same as when there is no space.
1154 # This will allow fixing the "lfs df" summary line in the future.
1156 $LFS df $* | sed -e 's/filesystem /filesystem_/'
1160 if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
1167 # save old quota type & set new quota type
1168 local mdt_qtype=$(mdt_quota_type)
1169 local ost_qtype=$(ost_quota_type)
1171 echo "[HOST:$HOSTNAME] [old_mdt_qtype:$mdt_qtype]" \
1172 "[old_ost_qtype:$ost_qtype] [new_qtype:$QUOTA_TYPE]"
1174 export old_MDT_QUOTA_TYPE=$mdt_qtype
1175 export old_OST_QUOTA_TYPE=$ost_qtype
1177 do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$QUOTA_TYPE ||
1178 error "set mdt quota type failed"
1179 do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$QUOTA_TYPE ||
1180 error "set ost quota type failed"
1182 local quota_usrs=$QUOTA_USERS
1184 # get_filesystem_size
1185 local disksz=$(lfs_df $mntpt | grep "summary" | awk '{print $2}')
1186 local blk_soft=$((disksz + 1024))
1187 local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
1189 local inodes=$(lfs_df -i $mntpt | grep "summary" | awk '{print $2}')
1190 local i_soft=$inodes
1191 local i_hard=$((i_soft + i_soft / 20))
1193 echo "Total disk size: $disksz block-softlimit: $blk_soft" \
1194 "block-hardlimit: $blk_hard inode-softlimit: $i_soft" \
1195 "inode-hardlimit: $i_hard"
1198 for usr in $quota_usrs; do
1199 echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
1201 cmd="$LFS setquota -$type $usr -b $blk_soft"
1202 cmd="$cmd -B $blk_hard -i $i_soft -I $i_hard $mntpt"
1204 eval $cmd || error "$cmd FAILED!"
1206 # display the quota status
1207 echo "Quota settings for $usr : "
1208 $LFS quota -v -u $usr $mntpt || true
1215 local OPTIONS=${3:-$MOUNTOPT}
1217 local device=$MGSNID:/$FSNAME
1218 if [ -z "$mnt" -o -z "$FSNAME" ]; then
1219 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
1223 echo "Starting client: $client: $OPTIONS $device $mnt"
1224 do_node $client mkdir -p $mnt
1225 do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
1227 set_default_debug_nodes $client
1239 [ "$3" ] && force=-f
1240 local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
1241 if [ $running -ne 0 ]; then
1242 echo "Stopping client $client $mnt (opts:$force)"
1243 do_node $client lsof -t $mnt || need_kill=no
1244 if [ "x$force" != "x" -a "x$need_kill" != "xno" ]; then
1245 pids=$(do_node $client lsof -t $mnt | sort -u);
1246 if [ -n $pids ]; then
1247 do_node $client kill -9 $pids || true
1251 busy=$(do_node $client "umount $force $mnt 2>&1" | grep -c "busy") || true
1252 if [ $busy -ne 0 ] ; then
1253 echo "$mnt is still busy, wait one second" && sleep 1
1254 do_node $client umount $force $mnt
1259 # nodes is comma list
1260 sanity_mount_check_nodes () {
1266 # FIXME: assume that all cluster nodes run the same os
1267 [ "$(uname)" = Linux ] || return 0
1270 for mnt in $mnts ; do
1271 do_nodes $nodes "running=\\\$(grep -c $mnt' ' /proc/mounts);
1272 mpts=\\\$(mount | grep -c $mnt' ');
1273 if [ \\\$running -ne \\\$mpts ]; then
1274 echo \\\$(hostname) env are INSANE!;
1277 [ $? -eq 0 ] || rc=1
1282 sanity_mount_check_servers () {
1283 [ "$CLIENTONLY" ] &&
1284 { echo "CLIENTONLY mode, skip mount_check_servers"; return 0; } || true
1285 echo Checking servers environments
1287 # FIXME: modify get_facets to display all facets wo params
1288 local facets="$(get_facets OST),$(get_facets MDS),mgs"
1292 for facet in ${facets//,/ }; do
1293 node=$(facet_host ${facet})
1294 mntpt=$(facet_mntpt $facet)
1295 sanity_mount_check_nodes $node $mntpt ||
1296 { error "server $node environments are insane!"; return 1; }
1300 sanity_mount_check_clients () {
1301 local clients=${1:-$CLIENTS}
1302 local mntpt=${2:-$MOUNT}
1303 local mntpt2=${3:-$MOUNT2}
1305 [ -z $clients ] && clients=$(hostname)
1306 echo Checking clients $clients environments
1308 sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
1309 error "clients environments are insane!"
1312 sanity_mount_check () {
1313 sanity_mount_check_servers || return 1
1314 sanity_mount_check_clients || return 2
1317 # mount clients if not mouted
1318 zconf_mount_clients() {
1321 local OPTIONS=${3:-$MOUNTOPT}
1323 local device=$MGSNID:/$FSNAME
1324 if [ -z "$mnt" -o -z "$FSNAME" ]; then
1325 echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
1329 echo "Starting client $clients: $OPTIONS $device $mnt"
1332 running=\\\$(mount | grep -c $mnt' ');
1334 if [ \\\$running -eq 0 ] ; then
1336 mount -t lustre $OPTIONS $device $mnt;
1339 exit \\\$rc" || return ${PIPESTATUS[0]}
1341 echo "Started clients $clients: "
1342 do_nodes $clients "mount | grep $mnt' '"
1344 set_default_debug_nodes $clients
1349 zconf_umount_clients() {
1354 [ "$3" ] && force=-f
1356 echo "Stopping clients: $clients $mnt (opts:$force)"
1357 do_nodes $clients "running=\\\$(grep -c $mnt' ' /proc/mounts);
1358 if [ \\\$running -ne 0 ] ; then
1359 echo Stopping client \\\$(hostname) $mnt opts:$force;
1360 lsof $mnt || need_kill=no;
1361 if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
1362 pids=\\\$(lsof -t $mnt | sort -u);
1363 if [ -n \\\"\\\$pids\\\" ]; then
1367 while umount $force $mnt 2>&1 | grep -q "busy"; do
1368 echo "$mnt is still busy, wait one second" && sleep 1;
1375 echo + $POWER_DOWN $node
1379 shutdown_node_hard () {
1381 local attempts=$SHUTDOWN_ATTEMPTS
1383 for i in $(seq $attempts) ; do
1386 wait_for_function --quiet "! ping -w 3 -c 1 $host" 5 1 && return 0
1387 echo "waiting for $host to fail attempts=$attempts"
1388 [ $i -lt $attempts ] || \
1389 { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
1395 local mnt=${2:-$MOUNT}
1398 if [ "$FAILURE_MODE" = HARD ]; then
1399 shutdown_node_hard $client
1401 zconf_umount_clients $client $mnt -f
1407 local facets="$(get_facets OST),$(get_facets MDS)"
1410 combined_mgs_mds || facets="$facets,mgs"
1412 for facet in ${facets//,/ }; do
1413 if [ $(facet_active_host $facet) == $host ]; then
1414 affected="$affected $facet"
1418 echo $(comma_list $affected)
1423 local host=${2:-$(facet_host $facet)}
1425 local label=$(convert_facet2label $facet)
1426 do_node $host $LCTL dl | awk '{print $4}' | grep -q -x $label
1429 facets_up_on_host () {
1431 local facets=$(facets_on_host $host)
1434 for facet in ${facets//,/ }; do
1435 if $(facet_up $facet $host); then
1436 affected_up="$affected_up $facet"
1440 echo $(comma_list $affected_up)
1446 if [ "$FAILURE_MODE" = HARD ]; then
1447 shutdown_node_hard $(facet_active_host $facet)
1455 echo + $POWER_UP $node
1468 if [ "$FAILURE_MODE" = HARD ]; then
1469 reboot_node $(facet_active_host $facet)
1471 refresh_disk ${facet}
1478 if [ "$FAILURE_MODE" = HARD ]; then
1488 for facet in ${facets//,/ }; do
1489 hosts=$(expand_list $hosts $(facet_host $facet) )
1495 _check_progs_installed () {
1499 for prog in $progs; do
1500 if ! [ "$(which $prog)" -o "${!prog}" ]; then
1501 echo $prog missing on $(hostname)
1508 check_progs_installed () {
1512 do_rpc_nodes "$nodes" _check_progs_installed $@
1515 # recovery-scale functions
1517 echo __$(echo $1 | tr '-' '_' | tr '.' '_')
1520 start_client_load() {
1523 local var=$(node_var_name $client)_load
1524 eval export ${var}=$load
1526 do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
1527 BREAK_ON_ERROR=$BREAK_ON_ERROR \
1528 END_RUN_FILE=$END_RUN_FILE \
1529 LOAD_PID_FILE=$LOAD_PID_FILE \
1530 TESTLOG_PREFIX=$TESTLOG_PREFIX \
1531 TESTNAME=$TESTNAME \
1532 DBENCH_LIB=$DBENCH_LIB \
1533 DBENCH_SRC=$DBENCH_SRC \
1536 log "Started client load: ${load} on $client"
1538 # get the children process IDs
1539 local pids=$(ps --ppid $ppid -o pid= | xargs)
1540 CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $ppid $pids"
1544 start_client_loads () {
1545 local -a clients=(${1//,/ })
1546 local numloads=${#CLIENT_LOADS[@]}
1549 for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
1550 testnum=$((nodenum % numloads))
1551 start_client_load ${clients[nodenum]} ${CLIENT_LOADS[testnum]}
1553 # bug 22169: wait the background threads to start
1557 # only for remote client
1558 check_client_load () {
1560 local var=$(node_var_name $client)_load
1561 local TESTLOAD=run_${!var}.sh
1563 ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
1565 # bug 18914: try to connect several times not only when
1566 # check ps, but while check_catastrophe also
1569 while [ $RC = 254 -a $tries -gt 0 ]; do
1573 if ! check_catastrophe $client; then
1575 if [ $RC -eq 254 ]; then
1576 # FIXME: not sure how long we shuold sleep here
1580 echo "check catastrophe failed: RC=$RC "
1584 # We can continue try to connect if RC=254
1585 # Just print the warning about this
1586 if [ $RC = 254 ]; then
1587 echo "got a return status of $RC from do_node while checking catastrophe on $client"
1590 # see if the load is still on the client
1593 while [ $RC = 254 -a $tries -gt 0 ]; do
1597 if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
1602 if [ $RC = 254 ]; then
1603 echo "got a return status of $RC from do_node while checking (catastrophe and 'ps') the client load on $client"
1604 # see if we can diagnose a bit why this is
1609 check_client_loads () {
1610 local clients=${1//,/ }
1614 for client in $clients; do
1615 check_client_load $client
1617 if [ "$rc" != 0 ]; then
1618 log "Client load failed on node $client, rc=$rc"
1624 restart_client_loads () {
1625 local clients=${1//,/ }
1626 local expectedfail=${2:-""}
1630 for client in $clients; do
1631 check_client_load $client
1633 if [ "$rc" != 0 -a "$expectedfail" ]; then
1634 local var=$(node_var_name $client)_load
1635 start_client_load $client ${!var}
1636 echo "Restarted client load ${!var}: on $client. Checking ..."
1637 check_client_load $client
1639 if [ "$rc" != 0 ]; then
1640 log "Client load failed to restart on node $client, rc=$rc"
1641 # failure one client load means test fail
1642 # we do not need to check other
1651 # Start vmstat and save its process ID in a file.
1656 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1659 "vmstat 1 > $TESTLOG_PREFIX.$TESTNAME.vmstat.\\\$(hostname -s).log \
1660 2>/dev/null </dev/null & echo \\\$! > $pid_file"
1663 # Display the nodes on which client loads failed.
1664 print_end_run_file() {
1668 [ -s $file ] || return 0
1670 echo "Found the END_RUN_FILE file: $file"
1673 # A client load will stop if it finds the END_RUN_FILE file.
1674 # That does not mean the client load actually failed though.
1675 # The first node in END_RUN_FILE is the one we are interested in.
1678 if [ -n "$node" ]; then
1679 local var=$(node_var_name $node)_load
1681 local prefix=$TESTLOG_PREFIX
1682 [ -n "$TESTNAME" ] && prefix=$prefix.$TESTNAME
1683 local stdout_log=$prefix.run_${!var}_stdout.$node.log
1684 local debug_log=$(echo $stdout_log | sed 's/\(.*\)stdout/\1debug/')
1686 echo "Client load ${!var} failed on node $node:"
1692 # Stop the process which had its PID saved in a file.
1697 [ -z "$nodes" -o -z "$pid_file" ] && return 0
1699 do_nodes $nodes "test -f $pid_file &&
1700 { kill -s TERM \\\$(cat $pid_file); rm -f $pid_file; }" || true
1703 # Stop all client loads.
1704 stop_client_loads() {
1705 local nodes=${1:-$CLIENTS}
1708 # stop the client loads
1709 stop_process $nodes $pid_file
1711 # clean up the processes that started them
1712 [ -n "$CLIENT_LOAD_PIDS" ] && kill -9 $CLIENT_LOAD_PIDS 2>/dev/null || true
1714 # End recovery-scale functions
1716 # verify that lustre actually cleaned up properly
1718 [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
1719 error "LBUG/LASSERT detected"
1720 BUSY=`dmesg | grep -i destruct || true`
1721 if [ "$BUSY" ]; then
1723 [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.`date +%s`
1727 check_mem_leak || exit 204
1729 [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl &&
1730 echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
1733 if module_loaded lnet || module_loaded libcfs; then
1734 echo "$TESTSUITE: modules still loaded..." 1>&2
1752 RESULT=$(do_node $node "$TEST")
1753 if [ "$RESULT" == "$FINAL" ]; then
1754 [ -z "$RESULT" -o $WAIT -le $sleep ] ||
1755 echo "Updated after ${WAIT}s: wanted '$FINAL' got '$RESULT'"
1758 [ $WAIT -ge $MAX ] && break
1759 [ $((WAIT % print)) -eq 0 ] &&
1760 echo "Waiting $((MAX - WAIT)) secs for update"
1761 WAIT=$((WAIT + sleep))
1764 echo "Update not seen after ${MAX}s: wanted '$FINAL' got '$RESULT'"
1768 wait_update_facet() {
1771 wait_update $(facet_active_host $facet) "$@"
1775 do_node $(osts_nodes) "lctl set_param -n osd*.*OS*.force_sync 1" 2>&1 |
1776 grep -v 'Found no match'
1779 wait_delete_completed_mds() {
1780 local MAX_WAIT=${1:-20}
1782 local stime=`date +%s`
1787 # find MDS with pending deletions
1788 for node in $(mdts_nodes); do
1789 changes=$(do_node $node "lctl get_param -n osc.*MDT*.sync_*" \
1790 2>/dev/null | calc_sum)
1791 if [ -z "$changes" ] || [ $changes -eq 0 ]; then
1794 mds2sync="$mds2sync $node"
1796 if [ "$mds2sync" == "" ]; then
1799 mds2sync=$(comma_list $mds2sync)
1801 # sync MDS transactions
1802 do_nodes $mds2sync "lctl set_param -n osd*.*MD*.force_sync 1"
1804 # wait till all changes are sent and commmitted by OSTs
1805 # for ldiskfs space is released upon execution, but DMU
1806 # do this upon commit
1809 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
1810 changes=$(do_nodes $mds2sync "lctl get_param -n osc.*MDT*.sync_*" \
1812 #echo "$node: $changes changes on all"
1813 if [ "$changes" -eq "0" ]; then
1815 #echo "delete took $((etime - stime)) seconds"
1823 echo "Delete is not completed in $((etime - stime)) seconds"
1824 do_nodes $mds2sync "lctl get_param osc.*MDT*.sync_*"
1830 # we can use "for" here because we are waiting the slowest
1831 for host in ${hostlist//,/ }; do
1832 check_network "$host" 900
1834 while ! do_nodes $hostlist hostname > /dev/null; do sleep 5; done
1841 for facet in ${facetlist//,/ }; do
1842 hostlist=$(expand_list $hostlist $(facet_active_host $facet))
1844 wait_for_host $hostlist
1847 _wait_recovery_complete () {
1850 # Use default policy if $2 is not passed by caller.
1851 local MAX=${2:-$(max_recovery_time)}
1856 while [ $WAIT -lt $MAX ]; do
1857 STATUS=$(lctl get_param -n $param | grep status)
1859 [[ $STATUS = "status: COMPLETE" || $STATUS = "status: INACTIVE" ]] && return 0
1862 echo "Waiting $((MAX - WAIT)) secs for $param recovery done. $STATUS"
1864 echo "$param recovery not done in $MAX sec. $STATUS"
1868 wait_recovery_complete () {
1871 # with an assumption that at_max is the same on all nodes
1872 local MAX=${2:-$(max_recovery_time)}
1875 if [ "$FAILURE_MODE" = HARD ]; then
1876 facets=$(facets_on_host $(facet_active_host $facet))
1878 echo affected facets: $facets
1880 # we can use "for" here because we are waiting the slowest
1881 for facet in ${facets//,/ }; do
1882 local var_svc=${facet}_svc
1883 local param="*.${!var_svc}.recovery_status"
1885 local host=$(facet_active_host $facet)
1886 do_rpc_nodes "$host" _wait_recovery_complete $param $MAX
1890 wait_mds_ost_sync () {
1891 # just because recovery is done doesn't mean we've finished
1892 # orphan cleanup. Wait for llogs to get synchronized.
1893 echo "Waiting for orphan cleanup..."
1894 # MAX value includes time needed for MDS-OST reconnection
1895 local MAX=$(( TIMEOUT * 2 ))
1897 while [ $WAIT -lt $MAX ]; do
1898 local -a sync=($(do_nodes $(comma_list $(osts_nodes)) \
1899 "$LCTL get_param -n obdfilter.*.mds_sync"))
1902 for ((i=0; i<${#sync[@]}; i++)); do
1903 [ ${sync[$i]} -eq 0 ] && continue
1904 # there is a not finished MDS-OST synchronization
1908 sleep 2 # increase waiting time and cover statfs cache
1909 [ ${con} -eq 1 ] && return 0
1910 echo "Waiting $WAIT secs for $facet mds-ost sync done."
1913 echo "$facet recovery not done in $MAX sec. $STATUS"
1917 wait_destroy_complete () {
1918 echo "Waiting for local destroys to complete"
1919 # MAX value shouldn't be big as this mean server responsiveness
1920 # never increase this just to make test pass but investigate
1921 # why it takes so long time
1924 while [ $WAIT -lt $MAX ]; do
1925 local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
1929 for ((i=0; i<${#RPCs[@]}; i++)); do
1930 [ ${RPCs[$i]} -eq 0 ] && continue
1931 # there are still some destroy RPCs in flight
1936 [ ${con} -eq 1 ] && return 0 # done waiting
1937 echo "Waiting ${WAIT}s for local destroys to complete"
1940 echo "Local destroys weren't done in $MAX sec."
1944 wait_delete_completed() {
1945 wait_delete_completed_mds $1 || return $?
1946 wait_destroy_complete
1955 # conf-sanity 31 takes a long time cleanup
1956 while [ $WAIT -lt 300 ]; do
1957 running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
1958 [ -z "${running}" ] && return 0
1959 echo "waited $WAIT for${running}"
1960 [ $INTERVAL -lt 64 ] && INTERVAL=$((INTERVAL + INTERVAL))
1962 WAIT=$((WAIT + INTERVAL))
1964 echo "service didn't stop after $WAIT seconds. Still running:"
1969 wait_remote_prog () {
1975 [ "$PDSH" = "no_dsh" ] && return 0
1977 while [ $WAIT -lt $2 ]; do
1978 running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
1979 [ -z "${running}" ] && return 0 || true
1980 echo "waited $WAIT for: "
1982 [ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
1984 WAIT=$((WAIT + INTERVAL))
1986 local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
1987 [ -z "$pids" ] && return 0
1988 echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
1989 # FIXME: not portable
1990 for pid in $pids; do
1991 cat /proc/${pid}/status || true
1992 cat /proc/${pid}/wchan || true
1994 kill -9 $pid || true
2003 # not every config has many clients
2005 if [ ! -z "$CLIENTS" ]; then
2006 $PDSH $CLIENTS "stat -f $MOUNT" > /dev/null
2008 stat -f $MOUNT > /dev/null
2014 # usually checked on particular client or locally
2016 if [ ! -z "$client" ]; then
2017 $PDSH $client "stat -f $MOUNT" > /dev/null
2019 stat -f $MOUNT > /dev/null
2027 client_reconnect() {
2028 uname -n >> $MOUNT/recon
2029 if [ -z "$CLIENTS" ]; then
2030 df $MOUNT; uname -n >> $MOUNT/recon
2032 do_nodes $CLIENTS "df $MOUNT; uname -n >> $MOUNT/recon" > /dev/null
2034 echo Connected clients:
2036 ls -l $MOUNT/recon > /dev/null
2040 affected_facets () {
2043 local host=$(facet_active_host $facet)
2044 local affected=$facet
2046 if [ "$FAILURE_MODE" = HARD ]; then
2047 affected=$(facets_up_on_host $host)
2061 #Because it will only get up facets, we need get affected
2062 #facets before shutdown
2063 #For HARD Failure mode, it needs make sure facets on the same
2064 #HOST will only be shutdown and reboot once
2065 for facet in ${facets//,/ }; do
2066 local affected_facet
2068 #check whether facet has been included in other affected facets
2069 for ((index=0; index<$total; index++)); do
2070 [[ *,$facet,* == ,${affecteds[index]}, ]] && skip=1
2073 if [ $skip -eq 0 ]; then
2074 affecteds[$total]=$(affected_facets $facet)
2079 for ((index=0; index<$total; index++)); do
2080 facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
2081 local host=$(facet_active_host $facet)
2082 echo "Failing ${affecteds[index]} on $host"
2083 shutdown_facet $facet
2086 for ((index=0; index<$total; index++)); do
2087 facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
2088 echo reboot facets: ${affecteds[index]}
2092 change_active ${affecteds[index]}
2094 wait_for_facet ${affecteds[index]}
2095 # start mgs first if it is affected
2096 if ! combined_mgs_mds &&
2097 list_member ${affecteds[index]} mgs; then
2098 mount_facet mgs || error "Restart of mgs failed"
2100 # FIXME; has to be changed to mount all facets concurrently
2101 affected=$(exclude_items_from_list ${affecteds[index]} mgs)
2102 echo mount facets: ${affecteds[index]}
2103 mount_facets ${affecteds[index]}
2113 do_facet $facet "sync; sync; sync"
2116 # make sure there will be no seq change
2117 local clients=${CLIENTS:-$HOSTNAME}
2118 local f=fsa-\\\$\(hostname\)
2119 do_nodes $clients "mcreate $MOUNT/$f; rm $MOUNT/$f"
2120 do_nodes $clients "if [ -d $MOUNT2 ]; then mcreate $MOUNT2/$f; rm $MOUNT2/$f; fi"
2122 local svc=${facet}_svc
2123 do_facet $facet $LCTL --device ${!svc} notransno
2124 do_facet $facet $LCTL --device ${!svc} readonly
2125 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2126 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2129 replay_barrier_nodf() {
2130 local facet=$1 echo running=${running}
2131 do_facet $facet "sync; sync; sync"
2132 local svc=${facet}_svc
2133 echo Replay barrier on ${!svc}
2134 do_facet $facet $LCTL --device ${!svc} notransno
2135 do_facet $facet $LCTL --device ${!svc} readonly
2136 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2137 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2140 replay_barrier_nosync() {
2141 local facet=$1 echo running=${running}
2142 local svc=${facet}_svc
2143 echo Replay barrier on ${!svc}
2144 do_facet $facet $LCTL --device ${!svc} notransno
2145 do_facet $facet $LCTL --device ${!svc} readonly
2146 do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
2147 $LCTL mark "local REPLAY BARRIER on ${!svc}"
2150 mds_evict_client() {
2151 UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
2152 do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
2155 ost_evict_client() {
2156 UUID=`lctl get_param -n devices| grep ${ost1_svc}-osc- | egrep -v 'MDT' | awk '{print $5}'`
2157 do_facet ost1 "lctl set_param -n obdfilter.${ost1_svc}.evict_client $UUID"
2161 facet_failover $* || error "failover: $?"
2162 clients_up || error "post-failover df: $?"
2167 facet_failover $facet
2173 refresh_disk ${facet}
2174 change_active $facet
2175 wait_for_facet $facet
2176 mount_facet $facet -o abort_recovery
2177 clients_up || echo "first df failed: $?"
2178 clients_up || error "post-failover df: $?"
2182 echo There is no lmc. This is mountconf, baby.
2186 host_nids_address() {
2190 if [ -n "$kind" ]; then
2191 nids=$(do_nodes $nodes "$LCTL list_nids | grep $kind | cut -f 1 -d '@'")
2193 nids=$(do_nodes $nodes "$LCTL list_nids all | cut -f 1 -d '@'")
2199 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2205 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2206 ID=`xtprocadmin -n $1 2>/dev/null | egrep -v 'NID' | awk '{print $1}'`
2207 if [ -z "$ID" ]; then
2208 echo "Could not get a ptl id for $1..."
2217 h2name_or_ip "$1" "tcp"
2222 if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
2223 if type __h2elan >/dev/null 2>&1; then
2226 ID=`echo $1 | sed 's/[^0-9]*//g'`
2234 h2name_or_ip "$1" "o2ib"
2238 # This enables variables in cfg/"setup".sh files to support the pdsh HOSTLIST
2239 # expressions format. As a bonus we can then just pass in those variables
2240 # to pdsh. What this function does is take a HOSTLIST type string and
2241 # expand it into a space deliminated list for us.
2249 [ -z "$hostlist" ] && return
2251 # Translate the case of [..],..,[..] to [..] .. [..]
2252 list="${hostlist/],/] }"
2254 [[ "$front" == *,* ]] && {
2257 list=${list/${old}/${new}}
2260 for item in $list; do
2261 # Test if we have any []'s at all
2262 if [ "$item" != "${item/\[/}" ]; then {
2263 # Expand the [*] into list
2267 if [ "$name" != "$item" ]; then
2268 group=${item#$name[*}
2271 for range in ${group//,/ }; do
2275 # Number of leading zeros
2278 end=$(echo $end | sed 's/0*//')
2279 [[ -z "$end" ]] && end=0
2280 [[ $padlen2 -gt $padlen ]] && {
2281 [[ $padlen2 -eq ${#end} ]] && padlen2=0
2284 begin=$(echo $begin | sed 's/0*//')
2285 [ -z $begin ] && begin=0
2287 for num in $(seq -f "%0${padlen}g" $begin $end); do
2288 value="${name#*,}${num}${back}"
2289 [ "$value" != "${value/\[/}" ] && {
2290 value=$(hostlist_expand "$value")
2292 myList="$myList $value"
2297 myList="$myList $item"
2300 myList=${myList//,/ }
2301 myList=${myList:1} # Remove first character which is a space
2303 # Filter any duplicates without sorting
2305 myList="${list%% *}"
2307 while [[ "$list" != ${myList##* } ]]; do
2308 list=${list//${list%% *} /}
2309 myList="$myList ${list%% *}"
2311 myList="${myList%* }";
2313 # We can select an object at a offset in the list
2316 for item in $myList; do
2318 [ $cnt -eq $offset ] && {
2322 [ $(get_node_count $myList) -ne 1 ] && myList=""
2331 [ "$facet" == client ] && echo -n $HOSTNAME && return
2332 varname=${facet}_HOST
2333 if [ -z "${!varname}" ]; then
2334 if [ "${facet:0:3}" == "ost" ]; then
2335 eval export ${facet}_HOST=${ost_HOST}
2336 elif [ "${facet:0:3}" == "mdt" -o \
2337 "${facet:0:3}" == "mds" -o \
2338 "${facet:0:3}" == "mgs" ]; then
2339 eval export ${facet}_HOST=${mds_HOST}
2345 facet_failover_host() {
2349 var=${facet}failover_HOST
2350 if [ -n "${!var}" ]; then
2355 if [ "${facet:0:3}" == "mdt" -o "${facet:0:3}" == "mds" -o \
2356 "${facet:0:3}" == "mgs" ]; then
2358 eval export ${facet}failover_host=${mds_HOST}
2363 if [[ $facet == ost* ]]; then
2364 eval export ${facet}failover_host=${ost_HOST}
2372 local activevar=${facet}active
2374 if [ -f $TMP/${facet}active ] ; then
2375 source $TMP/${facet}active
2378 active=${!activevar}
2379 if [ -z "$active" ] ; then
2386 facet_active_host() {
2388 local active=`facet_active $facet`
2389 if [ "$facet" == client ]; then
2392 echo `facet_host $active`
2400 facetlist=$(exclude_items_from_list $facetlist mgs)
2402 for facet in ${facetlist//,/ }; do
2403 local failover=${facet}failover
2404 local host=`facet_host $failover`
2405 [ -z "$host" ] && return
2407 local curactive=`facet_active $facet`
2408 if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
2409 eval export ${facet}active=$facet
2411 eval export ${facet}active=$failover
2413 # save the active host for this facet
2414 local activevar=${facet}active
2415 echo "$activevar=${!activevar}" > $TMP/$activevar
2416 [[ $facet = mds1 ]] && combined_mgs_mds && \
2417 echo "mgsactive=${!activevar}" > $TMP/mgsactive
2418 local TO=`facet_active_host $facet`
2419 echo "Failover $facet to $TO"
2425 # do not stripe off hostname if verbose, bug 19215
2426 if [ x$1 = x--verbose ]; then
2434 if [ "$HOST" = "$HOSTNAME" ]; then
2436 elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
2437 echo "cannot run remote command on $HOST with $myPDSH"
2441 echo "CMD: $HOST $@" >&2
2442 $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
2445 if [ "$myPDSH" = "rsh" ]; then
2446 # we need this because rsh does not return exit code of an executed command
2447 local command_status="$TMP/cs"
2448 rsh $HOST ":> $command_status"
2449 rsh $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin;
2450 cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\") ||
2451 echo command failed >$command_status"
2452 [ -n "$($myPDSH $HOST cat $command_status)" ] && return 1 || true
2457 # print HOSTNAME for myPDSH="no_dsh"
2458 if [[ $myPDSH = no_dsh ]]; then
2459 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed -e "s/^/${HOSTNAME}: /"
2461 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")"
2464 $myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed "s/^${HOST}: //"
2466 return ${PIPESTATUS[0]}
2470 do_node --verbose "$@"
2473 single_local_node () {
2474 [ "$1" = "$HOSTNAME" ]
2477 # Outputs environment variable assignments that should be passed to remote nodes
2481 local facets=$(get_facets)
2484 for var in ${!MODOPTS_*}; do
2486 echo -n " ${var}=\"$value\""
2489 for facet in ${facets//,/ }; do
2491 if [ -n "${!var}" ]; then
2492 echo -n " $var=${!var}"
2496 for var in MGSFSTYPE MDSFSTYPE OSTFSTYPE; do
2497 if [ -n "${!var}" ]; then
2498 echo -n " $var=${!var}"
2502 if [ -n "$FSTYPE" ]; then
2503 echo -n " FSTYPE=$FSTYPE"
2509 # do not stripe off hostname if verbose, bug 19215
2510 if [ x$1 = x--verbose ]; then
2518 if single_local_node $rnodes; then
2520 do_nodev $rnodes "$@"
2522 do_node $rnodes "$@"
2527 # This is part from do_node
2530 [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
2531 echo "cannot run remote command on $rnodes with $myPDSH" && return 128
2533 export FANOUT=$(get_node_count "${rnodes//,/ }")
2535 echo "CMD: $rnodes $@" >&2
2536 $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
2539 # do not replace anything from pdsh output if -N is used
2540 # -N Disable hostname: prefix on lines of output.
2541 if $verbose || [[ $myPDSH = *-N* ]]; then
2542 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")"
2544 $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")" | sed -re "s/^[^:]*: //g"
2546 return ${PIPESTATUS[0]}
2552 local HOST=`facet_active_host $facet`
2553 [ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
2557 # Function: do_facet_random_file $FACET $FILE $SIZE
2558 # Creates FILE with random content on the given FACET of given SIZE
2560 do_facet_random_file() {
2564 local cmd="dd if=/dev/urandom of='$fpath' bs=$fsize count=1"
2565 do_facet $facet "$cmd 2>/dev/null"
2568 do_facet_create_file() {
2572 local cmd="dd if=/dev/zero of='$fpath' bs=$fsize count=1"
2573 do_facet $facet "$cmd 2>/dev/null"
2577 do_nodes --verbose "$@"
2583 # make sure its not already running
2585 rm -f $TMP/${facet}active
2586 [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
2587 do_facet ${facet} $MKFS $*
2594 local fstype=$(facet_fstype ost$num)
2598 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
2599 eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
2601 #try $OSTDEVn then $OSTDEVBASE + num then zfs default
2602 local foo=${OSTDEVBASE:-${FSNAME}-ost${num}/ost}${num}
2603 eval DEVPTR=${!DEVNAME:=$foo};;
2605 error "unknown fstype!";;
2615 local fstype=$(facet_fstype ost$num)
2619 # vdevs are not supported by ldiskfs
2622 #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
2623 eval VDEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
2625 error "unknown fstype!";;
2635 local fstype=$(facet_fstype mds$num)
2639 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
2640 eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
2642 # try $MDSDEVn then $MDSDEVBASE + num then zfs default
2643 local foo=${MDSDEVBASE:-${FSNAME}-mdt${num}/mdt}${num}
2644 eval DEVPTR=${!DEVNAME:=$foo};;
2646 error "unknown fstype!";;
2656 local fstype=$(facet_fstype mds$num)
2660 # vdevs are not supported by ldiskfs
2663 #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
2664 eval VDEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
2666 error "unknown fstype!";;
2673 local DEVNAME=MGSDEV
2674 local MDSDEV1=$(mdsdevname 1)
2676 local fstype=$(facet_fstype mds1)
2680 #if $MGSDEV isn't defined, default is $MDSDEV1
2681 #ZFS independent mgsdev should be ${FSNAME}-mgs/mgs
2682 eval DEVPTR=${!DEVNAME:=${MDSDEV1}};;
2684 error "unknown fstype!";;
2693 local fstype=$(facet_fstype mds1)
2697 # vdevs are not supported by ldiskfs
2700 #if $MGSDEV isn't defined, default is $MGSDEV1
2701 eval VDEVPTR=${!DEVNAME:=${MDSDEV1}};;
2703 error "unknown fstype!";;
2711 [[ $facet = mgs ]] && combined_mgs_mds && facet="mds1"
2713 local var=${facet}_MOUNT
2714 eval mntpt=${!var:-${MOUNT%/*}/$facet}
2723 # make sure we are using the primary server, so test-framework will
2724 # be able to clean up properly.
2725 activemds=`facet_active mds1`
2726 if [ $activemds != "mds1" ]; then
2730 local clients=$CLIENTS
2731 [ -z $clients ] && clients=$(hostname)
2733 zconf_umount_clients $clients $MOUNT "$*" || true
2734 [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
2736 [ "$CLIENTONLY" ] && return
2737 # The add fn does rm ${facet}active file, this would be enough
2738 # if we use do_facet <facet> only after the facet added, but
2739 # currently we use do_facet mds in local.sh
2740 for num in `seq $MDSCOUNT`; do
2742 rm -f ${TMP}/mds${num}active
2744 combined_mgs_mds && rm -f $TMP/mgsactive
2746 for num in `seq $OSTCOUNT`; do
2748 rm -f $TMP/ost${num}active
2751 if ! combined_mgs_mds ; then
2758 cleanup_echo_devs () {
2759 local devs=$($LCTL dl | grep echo | awk '{print $4}')
2761 for dev in $devs; do
2762 $LCTL --device $dev cleanup
2763 $LCTL --device $dev detach
2768 nfs_client_mode && return
2777 combined_mgs_mds () {
2778 [[ "$(mdsdevname 1)" = "$(mgsdevname)" ]] &&
2779 [[ "$(facet_host mds1)" = "$(facet_host mgs)" ]]
2783 echo -n "$1" | tr '[:upper:]' '[:lower:]'
2787 echo -n "$1" | tr '[:lower:]' '[:upper:]'
2793 local fsname=${3:-"$FSNAME"}
2794 local type=$(facet_type $facet)
2795 local index=$(($(facet_number $facet) - 1))
2796 local fstype=$(facet_fstype $facet)
2797 local host=$(facet_host $facet)
2802 if [ $type == MGS ] && combined_mgs_mds; then
2806 if [ $type == MGS ] || ( [ $type == MDS ] &&
2807 [ "$dev" == $(mgsdevname) ] &&
2808 [ "$host" == "$(facet_host mgs)" ] ); then
2811 opts="--mgsnode=$MGSNID"
2814 if [ $type != MGS ]; then
2815 opts+=" --fsname=$fsname --$(lower ${type/MDS/MDT}) \
2819 var=${facet}failover_HOST
2820 if [ -n "${!var}" ] && [ ${!var} != $(facet_host $facet) ]; then
2821 opts+=" --failnode=$(h2$NETTYPE ${!var})"
2824 opts+=${TIMEOUT:+" --param=sys.timeout=$TIMEOUT"}
2825 opts+=${LDLM_TIMEOUT:+" --param=sys.ldlm_timeout=$LDLM_TIMEOUT"}
2827 if [ $type == MDS ]; then
2828 opts+=${SECLEVEL:+" --param=mdt.sec_level"}
2829 opts+=${MDSCAPA:+" --param-mdt.capa=$MDSCAPA"}
2830 opts+=${STRIPE_BYTES:+" --param=lov.stripesize=$STRIPE_BYTES"}
2831 opts+=${STRIPES_PER_OBJ:+" --param=lov.stripecount=$STRIPES_PER_OBJ"}
2832 opts+=${L_GETIDENTITY:+" --param=mdt.identity_upcall=$L_GETIDENTITY"}
2834 if [ $fstype == ldiskfs ]; then
2835 fs_mkfs_opts+=${MDSJOURNALSIZE:+" -J size=$MDSJOURNALSIZE"}
2836 fs_mkfs_opts+=${MDSISIZE:+" -i $MDSISIZE"}
2840 if [ $type == OST ]; then
2841 opts+=${SECLEVEL:+" --param=ost.sec_level"}
2842 opts+=${OSSCAPA:+" --param=ost.capa=$OSSCAPA"}
2844 if [ $fstype == ldiskfs ]; then
2845 fs_mkfs_opts+=${OSTJOURNALSIZE:+" -J size=$OSTJOURNALSIZE"}
2849 opts+=" --backfstype=$fstype"
2852 if [ -n "${!var}" ]; then
2853 opts+=" --device-size=${!var}"
2856 var=$(upper $fstype)_MKFS_OPTS
2857 fs_mkfs_opts+=${!var:+" ${!var}"}
2859 var=${type}_FS_MKFS_OPTS
2860 fs_mkfs_opts+=${!var:+" ${!var}"}
2862 if [ -n "${fs_mkfs_opts## }" ]; then
2863 opts+=" --mkfsoptions=\\\"${fs_mkfs_opts## }\\\""
2867 opts+=${!var:+" ${!var}"}
2880 # We need ldiskfs here, may as well load them all
2882 [ "$CLIENTONLY" ] && return
2883 echo Formatting mgs, mds, osts
2884 if ! combined_mgs_mds ; then
2885 echo "Format mgs: $(mgsdevname)"
2886 add mgs $(mkfs_opts mgs $(mgsdevname)) --reformat \
2887 $(mgsdevname) $(mgsvdevname) ${quiet:+>/dev/null} ||
2891 for num in $(seq $MDSCOUNT); do
2892 echo "Format mds$num: $(mdsdevname $num)"
2893 add mds$num $(mkfs_opts mds$num $(mdsdevname ${num})) \
2894 --reformat $(mdsdevname $num) $(mdsvdevname $num) \
2895 ${quiet:+>/dev/null} || exit 10
2898 for num in $(seq $OSTCOUNT); do
2899 echo "Format ost$num: $(ostdevname $num)"
2900 add ost$num $(mkfs_opts ost$num $(ostdevname ${num})) \
2901 --reformat $(ostdevname $num) $(ostvdevname ${num}) \
2902 ${quiet:+>/dev/null} || exit 10
2907 grep " $1 " /proc/mounts || zconf_mount $HOSTNAME $*
2911 grep " $1 " /proc/mounts && zconf_umount `hostname` $*
2915 # 0: success, the old identity set already.
2916 # 1: success, the old identity does not set.
2921 local j=`expr $num - 1`
2922 local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
2924 if [ -z "$MDT" ]; then
2928 local old="`do_facet mds$num "lctl get_param -n mdt.$MDT.identity_upcall"`"
2931 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"$L_GETIDENTITY\""
2933 do_facet mds$num "lctl set_param -n mdt.$MDT.identity_upcall \"NONE\""
2936 do_facet mds$num "lctl set_param -n mdt/$MDT/identity_flush=-1"
2938 if [ $old = "NONE" ]; then
2947 zconf_umount `hostname` $1 || error "umount failed"
2948 zconf_mount `hostname` $1 || error "mount failed"
2956 rm -f ${facet}active
2957 do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" || return 1
2962 local mdt_count=${1:-$MDSCOUNT}
2963 local ost_count=${2:-$OSTCOUNT}
2966 for num in $(seq $mdt_count); do
2967 DEVNAME=$(mdsdevname $num)
2968 writeconf_facet mds$num $DEVNAME || rc=$?
2971 for num in $(seq $ost_count); do
2972 DEVNAME=$(ostdevname $num)
2973 writeconf_facet ost$num $DEVNAME || rc=$?
2979 nfs_client_mode && return
2981 sanity_mount_check ||
2982 error "environments are insane!"
2986 if [ -z "$CLIENTONLY" ]; then
2987 echo Setup mgs, mdt, osts
2988 echo $WRITECONF | grep -q "writeconf" && \
2990 if ! combined_mgs_mds ; then
2991 start mgs $(mgsdevname) $MGS_MOUNT_OPTS
2994 for num in `seq $MDSCOUNT`; do
2995 DEVNAME=$(mdsdevname $num)
2996 start mds$num $DEVNAME $MDS_MOUNT_OPTS
2998 # We started mds, now we should set failover variables properly.
2999 # Set mds${num}failover_HOST if it is not set (the default failnode).
3000 local varname=mds${num}failover_HOST
3001 if [ -z "${!varname}" ]; then
3002 eval mds${num}failover_HOST=$(facet_host mds$num)
3005 if [ $IDENTITY_UPCALL != "default" ]; then
3006 switch_identity $num $IDENTITY_UPCALL
3009 for num in `seq $OSTCOUNT`; do
3010 DEVNAME=$(ostdevname $num)
3011 start ost$num $DEVNAME $OST_MOUNT_OPTS
3013 # We started ost$num, now we should set ost${num}failover variable properly.
3014 # Set ost${num}failover_HOST if it is not set (the default failnode).
3015 varname=ost${num}failover_HOST
3016 if [ -z "${!varname}" ]; then
3017 eval ost${num}failover_HOST=$(facet_host ost${num})
3025 # wait a while to allow sptlrpc configuration be propogated to targets,
3026 # only needed when mounting new target devices.
3031 [ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
3033 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
3036 if [ "$MOUNT_2" ]; then
3037 mount_client $MOUNT2
3038 [ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
3043 # by remounting mdt before ost, initial connect from mdt to ost might
3044 # timeout because ost is not ready yet. wait some time to its fully
3045 # recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
3046 # by a context negotiation rpc with $TIMEOUT.
3047 # FIXME better by monitoring import status.
3050 sleep $((TIMEOUT + 5))
3056 mounted_lustre_filesystems() {
3057 awk '($3 ~ "lustre" && $1 ~ ":") { print $2 }' /proc/mounts
3060 init_facet_vars () {
3061 [ "$CLIENTONLY" ] && return 0
3068 eval export ${facet}_dev=${device}
3069 eval export ${facet}_opt=\"$@\"
3071 local dev=${facet}_dev
3073 # We need to loop for the label
3074 # in case its not initialized yet.
3075 for wait_time in {0,1,3,5,10}; do
3077 if [ $wait_time -gt 0 ]; then
3078 echo "${!dev} not yet initialized,"\
3079 "waiting ${wait_time} seconds."
3083 local label=$(devicelabel ${facet} ${!dev})
3085 # Check to make sure the label does
3086 # not include ffff at the end of the label.
3087 # This indicates it has not been initialized yet.
3089 if [[ $label =~ [f|F]{4}$ ]]; then
3090 # label is not initialized, unset the result
3091 # and either try again or fail
3098 [ -z "$label" ] && echo no label for ${!dev} && exit 1
3100 eval export ${facet}_svc=${label}
3102 local varname=${facet}failover_HOST
3103 if [ -z "${!varname}" ]; then
3104 eval export $varname=$(facet_host $facet)
3107 varname=${facet}_HOST
3108 if [ -z "${!varname}" ]; then
3109 eval export $varname=$(facet_host $facet)
3112 # ${facet}failover_dev is set in cfg file
3113 varname=${facet}failover_dev
3114 if [ -n "${!varname}" ] ; then
3115 eval export ${facet}failover_dev=${!varname}
3117 eval export ${facet}failover_dev=$device
3120 # get mount point of already mounted device
3121 # is facet_dev is already mounted then use the real
3122 # mount point of this facet; otherwise use $(facet_mntpt $facet)
3123 # i.e. ${facet}_MOUNT if specified by user or default
3124 local mntpt=$(do_facet ${facet} cat /proc/mounts | \
3125 awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
3126 if [ -z $mntpt ]; then
3127 mntpt=$(facet_mntpt $facet)
3129 eval export ${facet}_MOUNT=$mntpt
3132 init_facets_vars () {
3135 if ! remote_mds_nodsh; then
3136 for num in $(seq $MDSCOUNT); do
3137 DEVNAME=`mdsdevname $num`
3138 eval export MDSDEV${num}=$DEVNAME
3139 init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
3143 eval export MGSDEV=$(mgsdevname)
3144 combined_mgs_mds || init_facet_vars mgs $(mgsdevname) $MGS_MOUNT_OPTS
3146 if ! remote_ost_nodsh; then
3147 for num in $(seq $OSTCOUNT); do
3148 DEVNAME=$(ostdevname $num)
3149 eval export OSTDEV${num}=$DEVNAME
3150 init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
3155 osc_ensure_active () {
3160 while [ $period -lt $timeout ]; do
3161 count=$(do_facet $facet "lctl dl | grep ' IN osc ' 2>/dev/null | wc -l")
3162 if [ $count -eq 0 ]; then
3166 echo "There are $count OST are inactive, wait $period seconds, and try again"
3168 period=$((period+3))
3171 [ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
3174 set_conf_param_and_check() {
3178 local ORIG=$(do_facet $myfacet "$TEST")
3179 if [ $# -gt 3 ]; then
3185 echo "Setting $PARAM from $ORIG to $FINAL"
3186 do_facet mgs "$LCTL conf_param $PARAM='$FINAL'" ||
3187 error "conf_param $PARAM failed"
3189 wait_update $(facet_host $myfacet) "$TEST" "$FINAL" ||
3190 error "check $PARAM failed!"
3193 init_param_vars () {
3195 TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
3197 log "Using TIMEOUT=$TIMEOUT"
3199 osc_ensure_active $SINGLEMDS $TIMEOUT
3200 osc_ensure_active client $TIMEOUT
3203 if [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ]; then
3205 elif [ $JOBSTATS_AUTO -ne 0 ]; then
3206 echo "enable jobstats, set job scheduler as $JOBID_VAR"
3207 jobid_var=$JOBID_VAR
3209 jobid_var=`$LCTL get_param -n jobid_var`
3210 if [ $jobid_var != "disable" ]; then
3211 echo "disable jobstats as required"
3218 if [ $jobid_var == $JOBID_VAR -o $jobid_var == "disable" ]; then
3219 do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$jobid_var
3220 wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
3221 $jobid_var || return 1
3224 if [ $QUOTA_AUTO -ne 0 ]; then
3225 if [ "$ENABLE_QUOTA" ]; then
3226 echo "enable quota as required"
3227 setup_quota $MOUNT || return 2
3229 echo "disable quota as required"
3230 # $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
3236 nfs_client_mode () {
3237 if [ "$NFSCLIENT" ]; then
3238 echo "NFSCLIENT mode: setup, cleanup, check config skipped"
3239 local clients=$CLIENTS
3240 [ -z $clients ] && clients=$(hostname)
3242 # FIXME: remove hostname when 19215 fixed
3243 do_nodes $clients "echo \\\$(hostname); grep ' '$MOUNT' ' /proc/mounts"
3244 declare -a nfsexport=(`grep ' '$MOUNT' ' /proc/mounts | awk '{print $1}' | awk -F: '{print $1 " " $2}'`)
3245 if [[ ${#nfsexport[@]} -eq 0 ]]; then
3246 error_exit NFSCLIENT=$NFSCLIENT mode, but no NFS export found!
3248 do_nodes ${nfsexport[0]} "echo \\\$(hostname); df -T ${nfsexport[1]}"
3254 check_config_client () {
3257 local mounted=$(mount | grep " $mntpt ")
3258 if [ "$CLIENTONLY" ]; then
3260 # CLIENTONLY should not depend on *_HOST settings
3261 local mgc=$($LCTL device_list | awk '/MGC/ {print $4}')
3262 # in theory someone could create a new,
3263 # client-only config file that assumed lustre was already
3264 # configured and didn't set the MGSNID. If MGSNID is not set,
3265 # then we should use the mgs nid currently being used
3266 # as the default value. bug 18021
3267 [[ x$MGSNID = x ]] &&
3270 if [[ x$mgc != xMGC$MGSNID ]]; then
3271 if [ "$mgs_HOST" ]; then
3272 local mgc_ip=$(ping -q -c1 -w1 $mgs_HOST | grep PING | awk '{print $3}' | sed -e "s/(//g" -e "s/)//g")
3273 # [[ x$mgc = xMGC$mgc_ip@$NETTYPE ]] ||
3274 # error_exit "MGSNID=$MGSNID, mounted: $mounted, MGC : $mgc"
3280 local myMGS_host=$mgs_HOST
3281 if [ "$NETTYPE" = "ptl" ]; then
3282 myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
3285 echo Checking config lustre mounted on $mntpt
3286 local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
3287 mgshost=$(echo $mgshost | awk -F: '{print $1}')
3289 # if [ "$mgshost" != "$myMGS_host" ]; then
3290 # log "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
3291 # Please use correct config or set mds_HOST correctly!"
3296 check_config_clients () {
3297 local clients=${CLIENTS:-$HOSTNAME}
3300 nfs_client_mode && return
3302 do_rpc_nodes "$clients" check_config_client $mntpt
3304 sanity_mount_check || error "environments are insane!"
3308 local mdstimeout=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
3309 local cltimeout=$(lctl get_param -n timeout)
3310 if [ $mdstimeout -ne $TIMEOUT ] || [ $mdstimeout -ne $cltimeout ]; then
3311 error "timeouts are wrong! mds: $mdstimeout, client: $cltimeout, TIMEOUT=$TIMEOUT"
3318 [ -z $mntpt ] && return 1
3319 local mounted=$(mounted_lustre_filesystems)
3321 echo $mounted' ' | grep -w -q $mntpt' '
3325 [ $(find $1 -maxdepth 1 -print | wc -l) = 1 ] && return 0
3329 # empty lustre filesystem may have empty directories lost+found and .lustre
3331 [ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
3332 -print | wc -l) = 1 ] || return 1
3333 [ ! -d $1/lost+found ] || is_empty_dir $1/lost+found && return 0
3334 [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre && return 0
3338 check_and_setup_lustre() {
3339 nfs_client_mode && return
3341 local MOUNTED=$(mounted_lustre_filesystems)
3345 # both MOUNT and MOUNT2 are not mounted
3346 if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
3347 [ "$REFORMAT" ] && formatall
3348 # setupall mounts both MOUNT and MOUNT2 (if MOUNT_2 is set)
3350 is_mounted $MOUNT || error "NAME=$NAME not mounted"
3351 export I_MOUNTED=yes
3355 elif is_mounted $MOUNT2; then
3357 # MOUNT2 is mounted, while MOUNT_2 is not set
3358 if ! [ "$MOUNT_2" ]; then
3359 cleanup_mount $MOUNT2
3360 export I_UMOUNTED2=yes
3363 # MOUNT2 is mounted, MOUNT_2 is set
3365 # FIXME: what to do if check_config failed?
3367 # 1) remote client has mounted other Lustre fs ?
3368 # 2) it has insane env ?
3369 # let's try umount MOUNT2 on all clients and mount it again:
3370 if ! check_config_clients $MOUNT2; then
3371 cleanup_mount $MOUNT2
3372 restore_mount $MOUNT2
3373 export I_MOUNTED2=yes
3378 # MOUNT is mounted MOUNT2 is not mounted
3379 elif [ "$MOUNT_2" ]; then
3380 restore_mount $MOUNT2
3381 export I_MOUNTED2=yes
3385 # FIXME: what to do if check_config failed?
3387 # 1) remote client has mounted other Lustre fs?
3388 # 2) lustre is mounted on remote_clients atall ?
3389 check_config_clients $MOUNT
3393 set_default_debug_nodes $(comma_list $(nodes_list))
3401 if [ "$ONLY" == "setup" ]; then
3407 local clients=${CLIENTS:-$HOSTNAME}
3410 zconf_mount_clients $clients $mntpt
3414 local clients=${CLIENTS:-$HOSTNAME}
3417 zconf_umount_clients $clients $mntpt
3420 cleanup_and_setup_lustre() {
3421 if [ "$ONLY" == "cleanup" -o "`mount | grep $MOUNT`" ]; then
3422 lctl set_param debug=0 || true
3424 if [ "$ONLY" == "cleanup" ]; then
3428 check_and_setup_lustre
3431 # Get all of the server target devices from a given server node and type.
3438 if [ "$type" == ost ]; then
3439 devs=$(get_obdfilter_param $node "" mntdev)
3441 devs=$(do_node $node \
3442 "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
3444 for dev in $devs; do
3446 *loop*) do_node $node "losetup $dev" | \
3447 sed -e "s/.*(//" -e "s/).*//" ;;
3453 # Get all of the server target devices.
3458 MDTDEV=$(get_mnt_devs $(mdts_nodes) mdt)
3462 for node in $(osts_nodes); do
3463 OSTDEVS[i]=$(get_mnt_devs $node ost)
3468 # Run e2fsck on MDT or OST device.
3474 df > /dev/null # update statfs data on disk
3475 local cmd="$E2FSCK -d -v -t -t -f $extra_opts $target_dev"
3478 do_node $node $cmd || rc=$?
3479 [ $rc -le $FSCK_MAX_ERR ] || \
3480 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
3484 # verify a directory is shared among nodes.
3485 check_shared_dir() {
3488 [ -z "$dir" ] && return 1
3489 do_rpc_nodes "$(comma_list $(nodes_list))" check_logdir $dir
3490 check_write_access $dir || return 1
3494 # Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
3500 [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
3501 { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
3503 check_shared_dir $SHARED_DIRECTORY ||
3504 error "$SHARED_DIRECTORY isn't a shared directory"
3506 export MDSDB=$SHARED_DIRECTORY/mdsdb
3507 export OSTDB=$SHARED_DIRECTORY/ostdb
3509 [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
3511 run_e2fsck $(mdts_nodes) $MDTDEV "-n --mdsdb $MDSDB"
3516 for node in $(osts_nodes); do
3517 for dev in ${OSTDEVS[i]}; do
3518 run_e2fsck $node $dev "-n --mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
3519 OSTDB_LIST="$OSTDB_LIST $OSTDB-$ostidx"
3520 ostidx=$((ostidx + 1))
3527 local cmd="$LFSCK_BIN -c -l --mdsdb $MDSDB --ostdb $OSTDB_LIST $MOUNT"
3531 [ $rc -le $FSCK_MAX_ERR ] || \
3532 error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
3533 echo "lfsck finished with rc=$rc"
3535 rm -rvf $MDSDB* $OSTDB* || true
3539 check_and_cleanup_lustre() {
3540 if [ "$LFSCK_ALWAYS" = "yes" -a "$TESTSUITE" != "lfsck" ]; then
3546 if is_mounted $MOUNT; then
3547 [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
3548 error "remove sub-test dirs failed"
3549 [ "$ENABLE_QUOTA" ] && restore_quota || true
3552 if [ "$I_UMOUNTED2" = "yes" ]; then
3553 restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
3556 if [ "$I_MOUNTED2" = "yes" ]; then
3557 cleanup_mount $MOUNT2
3560 if [ "$I_MOUNTED" = "yes" ]; then
3561 cleanupall -f || error "cleanup failed"
3569 wait_for_function () {
3572 # suppress fn both stderr and stdout
3573 if [ "$1" = "--quiet" ]; then
3575 quiet=" > /dev/null 2>&1"
3587 eval $fn $quiet && return 0
3589 wait=$((wait + sleep))
3590 [ $wait -lt $max ] || return 1
3591 echo waiting $fn, $((max - wait)) secs left ...
3601 echo `date +"%H:%M:%S (%s)"` waiting for $host network $max secs ...
3602 if ! wait_for_function --quiet "ping -c 1 -w 3 $host" $max $sleep ; then
3603 echo "Network not available!"
3607 echo `date +"%H:%M:%S (%s)"` network interface is UP
3615 # Convert a space-delimited list to a comma-delimited list. If the input is
3616 # only whitespace, ensure the output is empty (i.e. "") so [ -n $list ] works
3618 # echo is used to convert newlines to spaces, since it doesn't
3619 # introduce a trailing space as using "tr '\n' ' '" does
3620 echo $(tr -s " " "\n" <<< $* | sort -b -u) | tr ' ' ','
3626 echo $list | grep -qw $item
3629 # list, excluded are the comma separated lists
3630 exclude_items_from_list () {
3636 for item in ${excluded//,/ }; do
3637 list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
3639 echo $(comma_list $list)
3642 # list, expand are the comma separated lists
3644 local list=${1//,/ }
3645 local expand=${2//,/ }
3648 expanded=$(for i in $list $expand; do echo $i; done | sort -u)
3649 echo $(comma_list $expanded)
3652 testslist_filter () {
3653 local script=$LUSTRE/tests/${TESTSUITE}.sh
3655 [ -f $script ] || return 0
3657 local start_at=$START_AT
3658 local stop_at=$STOP_AT
3660 local var=${TESTSUITE//-/_}_START_AT
3661 [ x"${!var}" != x ] && start_at=${!var}
3662 var=${TESTSUITE//-/_}_STOP_AT
3663 [ x"${!var}" != x ] && stop_at=${!var}
3665 sed -n 's/^test_\([^ (]*\).*/\1/p' $script | \
3666 awk ' BEGIN { if ("'${start_at:-0}'" != 0) flag = 1 }
3667 /^'${start_at}'$/ {flag = 0}
3668 {if (flag == 1) print $0}
3669 /^'${stop_at}'$/ { flag = 1 }'
3673 (cd `dirname $1`; echo $PWD/`basename $1`)
3677 local types=${1:-"OST MDS MGS"}
3681 for entry in $types; do
3682 local name=$(echo $entry | tr "[:upper:]" "[:lower:]")
3683 local type=$(echo $entry | tr "[:lower:]" "[:upper:]")
3686 MGS ) list="$list $name";;
3687 MDS|OST ) local count=${type}COUNT
3688 for ((i=1; i<=${!count}; i++)) do
3689 list="$list ${name}$i"
3691 * ) error "Invalid facet type"
3695 echo $(comma_list $list)
3698 ##################################
3699 # Adaptive Timeouts funcs
3702 # only check mds, we assume at_max is the same on all nodes
3703 local at_max=$(do_facet $SINGLEMDS "lctl get_param -n at_max")
3704 if [ $at_max -eq 0 ]; then
3715 # suppose that all ost-s have the same $at value set
3716 [ $facet != "ost" ] || facet=ost1
3718 do_facet $facet "lctl get_param -n $at"
3736 if [ $facet == "ost" ]; then
3737 facet=$(get_facets OST)
3738 elif [ $facet == "mds" ]; then
3739 facet=$(get_facets MDS)
3741 hosts=$(expand_list $hosts $(facets_hosts $facet))
3744 do_nodes $hosts lctl set_param at_max=$at_max
3747 ##################################
3751 # OBD_FAIL_MDS_ALL_REQUEST_NET
3753 do_facet $SINGLEMDS lctl set_param fail_loc=0x123
3754 do_facet client "$1" || RC=$?
3755 do_facet $SINGLEMDS lctl set_param fail_loc=0
3760 # OBD_FAIL_MDS_ALL_REPLY_NET
3762 do_facet $SINGLEMDS lctl set_param fail_loc=0x122
3763 do_facet client "$@" || RC=$?
3764 do_facet $SINGLEMDS lctl set_param fail_loc=0
3768 drop_reint_reply() {
3769 # OBD_FAIL_MDS_REINT_NET_REP
3771 do_facet $SINGLEMDS lctl set_param fail_loc=0x119
3772 do_facet client "$@" || RC=$?
3773 do_facet $SINGLEMDS lctl set_param fail_loc=0
3777 drop_update_reply() {
3778 # OBD_FAIL_MDS_OBJ_UPDATE_NET
3782 do_facet mds${index} lctl set_param fail_loc=0x188
3783 do_facet client "$@" || RC=$?
3784 do_facet mds${index} lctl set_param fail_loc=0
3789 #define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
3791 do_facet ost1 lctl set_param fail_loc=0x214
3792 do_facet client "$1" || RC=$?
3793 do_facet client "sync"
3794 do_facet ost1 lctl set_param fail_loc=0
3798 drop_ldlm_cancel() {
3799 #define OBD_FAIL_LDLM_CANCEL_NET 0x304
3801 local list=$(comma_list $(mdts_nodes) $(osts_nodes))
3802 do_nodes $list lctl set_param fail_loc=0x304
3804 do_facet client "$@" || RC=$?
3806 do_nodes $list lctl set_param fail_loc=0
3810 drop_bl_callback() {
3811 #define OBD_FAIL_LDLM_BL_CALLBACK_NET 0x305
3813 do_facet client lctl set_param fail_loc=0x80000305
3814 do_facet client "$@" || RC=$?
3815 do_facet client lctl set_param fail_loc=0
3820 #define OBD_FAIL_LDLM_REPLY 0x30c
3822 do_facet $SINGLEMDS lctl set_param fail_loc=0x30c
3823 do_facet client "$@" || RC=$?
3824 do_facet $SINGLEMDS lctl set_param fail_loc=0
3832 echo "clearing fail_loc on $facet"
3833 do_facet $facet "lctl set_param fail_loc=0 2>/dev/null || true"
3836 set_nodes_failloc () {
3837 do_nodes $(comma_list $1) lctl set_param fail_loc=$2
3840 cancel_lru_locks() {
3841 $LCTL mark "cancel_lru_locks $1 start"
3842 for d in `lctl get_param -N ldlm.namespaces.*.lru_size | egrep -i $1`; do
3843 $LCTL set_param -n $d=clear
3845 $LCTL get_param ldlm.namespaces.*.lock_unused_count | egrep -i $1 | grep -v '=0'
3846 $LCTL mark "cancel_lru_locks $1 stop"
3851 NR_CPU=$(grep -c "processor" /proc/cpuinfo)
3852 DEFAULT_LRU_SIZE=$((100 * NR_CPU))
3853 echo "$DEFAULT_LRU_SIZE"
3858 lctl set_param ldlm.namespaces.*$1*.lru_size=0
3861 lru_resize_disable()
3863 lctl set_param ldlm.namespaces.*$1*.lru_size $(default_lru_size)
3868 for FILE in `lctl get_param -N "llite.*.dump_page_cache"`; do
3869 if [ `lctl get_param -n $FILE | wc -l` -gt 1 ]; then
3870 echo there is still data in page cache $FILE ?
3871 lctl get_param -n $FILE
3879 DEBUGSAVE="$(lctl get_param -n debug)"
3883 [ -n "$DEBUGSAVE" ] && \
3884 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=\\\"${DEBUGSAVE}\\\";"
3889 DEBUG_SIZE_SAVED="$(lctl get_param -n debug_mb)"
3892 debug_size_restore() {
3893 [ -n "$DEBUG_SIZE_SAVED" ] && \
3894 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE_SAVED"
3898 start_full_debug_logging() {
3903 local DEBUG_SIZE=150
3905 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug_mb=$DEBUG_SIZE"
3906 do_nodes $(comma_list $(nodes_list)) "$LCTL set_param debug=$FULLDEBUG;"
3909 stop_full_debug_logging() {
3914 # prints bash call stack
3917 for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
3918 local s=${BASH_SOURCE[$i]}
3919 local l=${BASH_LINENO[$i-1]}
3920 local f=${FUNCNAME[$i]}
3921 echo " = $s:$l:$f()"
3925 ##################################
3927 ##################################
3930 local TYPE=${TYPE:-"FAIL"}
3933 # do not dump logs if $1=false
3934 if [ "x$1" = "xfalse" ]; then
3939 log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
3943 # We need to dump the logs on all nodes
3945 gather_logs $(comma_list $(nodes_list))
3949 [ "$TESTSUITELOG" ] &&
3950 echo "$TESTSUITE: $TYPE: $TESTNAME $@" >> $TESTSUITELOG
3951 echo "$@" > $LOGDIR/err
3956 local log=$TESTSUITELOG
3958 [ -f "$log" ] && grep -q FAIL $log && status=1
3971 # use only if we are ignoring failures for this test, bugno required.
3972 # (like ALWAYS_EXCEPT, but run the test and ignore the results.)
3973 # e.g. error_ignore 5494 "your message"
3975 local TYPE="IGNORE (bz$1)"
3980 error_and_remount() {
3982 remount_client $MOUNT
3987 $FAIL_ON_SKIP_ENV && error false $@ || skip $@
3992 log " SKIP: $TESTSUITE $TESTNAME $@"
3994 if [[ -n "$ALWAYS_SKIPPED" ]]; then
3995 skip_logged $TESTNAME "$@"
3998 echo "$@" > $LOGDIR/skip
4001 [[ -n "$TESTSUITELOG" ]] &&
4002 echo "$TESTSUITE: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
4005 build_test_filter() {
4006 EXCEPT="$EXCEPT $(testslist_filter)"
4008 [ "$ONLY" ] && log "only running test `echo $ONLY`"
4012 [ "$EXCEPT$ALWAYS_EXCEPT" ] && \
4013 log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
4014 [ "$EXCEPT_SLOW" ] && \
4015 log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
4016 for E in $EXCEPT; do
4017 eval EXCEPT_${E}=true
4019 for E in $ALWAYS_EXCEPT; do
4020 eval EXCEPT_ALWAYS_${E}=true
4022 for E in $EXCEPT_SLOW; do
4023 eval EXCEPT_SLOW_${E}=true
4025 for G in $GRANT_CHECK_LIST; do
4026 eval GCHECK_ONLY_${G}=true
4031 if [[ $1 = [a-z]* ]]; then
4038 # print a newline if the last test was skipped
4039 export LAST_SKIPPED=
4040 export ALWAYS_SKIPPED=
4042 # Main entry into test-framework. This is called with the name and
4043 # description of a test. The name is used to find the function to run
4044 # the test using "test_$name".
4046 # This supports a variety of methods of specifying specific test to
4047 # run or not run. These need to be documented...
4052 export base=`basetest $1`
4053 if [ ! -z "$ONLY" ]; then
4055 if [ ${!testname}x != x ]; then
4056 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
4057 run_one_logged $1 "$2"
4061 if [ ${!testname}x != x ]; then
4062 [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
4063 run_one_logged $1 "$2"
4074 if [ ${!testname}x != x ]; then
4075 TESTNAME=test_$1 skip "skipping excluded test $1"
4078 testname=EXCEPT_$base
4079 if [ ${!testname}x != x ]; then
4080 TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
4083 testname=EXCEPT_ALWAYS_$1
4084 if [ ${!testname}x != x ]; then
4085 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
4088 testname=EXCEPT_ALWAYS_$base
4089 if [ ${!testname}x != x ]; then
4090 TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
4093 testname=EXCEPT_SLOW_$1
4094 if [ ${!testname}x != x ]; then
4095 TESTNAME=test_$1 skip "skipping SLOW test $1"
4098 testname=EXCEPT_SLOW_$base
4099 if [ ${!testname}x != x ]; then
4100 TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
4106 run_one_logged $1 "$2"
4113 module_loaded lnet || load_modules
4125 do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
4130 strace -o $TMP/$1.strace -ttt $*
4132 log "FINISHED: $*: rc $RC"
4139 banner test complete, duration $duration sec
4140 [ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
4141 echo duration $duration >>$TESTSUITELOG
4145 # Set TEST_STATUS here. It will be used for logging the result.
4148 if [[ -f $LOGDIR/err ]]; then
4150 elif [[ -f $LOGDIR/skip ]]; then
4153 echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
4157 local FFREE=$(do_node $SINGLEMDS \
4158 lctl get_param -n osd*.*MDT*.filesfree | calc_sum)
4159 local FTOTAL=$(do_node $SINGLEMDS \
4160 lctl get_param -n osd*.*MDT*.filestotal | calc_sum)
4162 [ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
4166 echo -n "Resetting fail_loc on all nodes..."
4167 do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 2>/dev/null || true"
4173 # Log a message (on all nodes) padded with "=" before and after.
4174 # Also appends a timestamp and prepends the testsuite name.
4177 EQUALS="===================================================================================================="
4179 msg="== ${TESTSUITE} $*"
4181 [[ $last != "=" && $last != " " ]] && msg="$msg "
4182 msg=$(printf '%s%.*s' "$msg" $((${#EQUALS} - ${#msg})) $EQUALS )
4183 # always include at least == after the message
4184 log "$msg== $(date +"%H:%M:%S (%s)")"
4188 # Run a single test function and cleanup after it.
4190 # This function should be run in a subshell so the test func can
4191 # exit() without stopping the whole script.
4196 tfile=f.${TESTSUITE}.${testnum}
4197 export tdir=d0.${TESTSUITE}/d${base}
4198 export TESTNAME=test_$testnum
4199 local SAVE_UMASK=`umask`
4202 banner "test $testnum: $message"
4203 test_${testnum} || error "test_$testnum failed with $?"
4206 check_grant ${testnum} || error "check_grant $testnum failed with $?"
4207 check_catastrophe || error "LBUG/LASSERT detected"
4208 ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
4216 # Wrapper around run_one to ensure:
4217 # - test runs in subshell
4218 # - output of test is saved to separate log file for error reporting
4219 # - test result is saved to data file
4222 local BEFORE=`date +%s`
4224 local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
4225 local test_log=$LOGDIR/$name
4228 local SAVE_UMASK=`umask`
4232 log_sub_test_begin test_${1}
4233 (run_one $1 "$2") 2>&1 | tee -i $test_log
4234 local RC=${PIPESTATUS[0]}
4236 [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
4237 echo "test_$1 returned $RC" | tee $LOGDIR/err
4239 duration=$((`date +%s` - $BEFORE))
4240 pass "$1" "(${duration}s)"
4242 if [[ -f $LOGDIR/err ]]; then
4243 TEST_ERROR=$(cat $LOGDIR/err)
4244 elif [[ -f $LOGDIR/skip ]]; then
4245 TEST_ERROR=$(cat $LOGDIR/skip)
4247 log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
4249 if [ -f $LOGDIR/err ]; then
4250 $FAIL_ON_ERROR && exit $RC
4259 # Print information of skipped tests to result.yml
4262 log_sub_test_begin $1
4264 log_sub_test_end "SKIP" "0" "0" "$@"
4268 (cd `dirname $1`; echo $PWD/`basename $1`)
4273 export base=`basetest $1`
4274 [ "$CHECK_GRANT" == "no" ] && return 0
4276 testname=GCHECK_ONLY_${base}
4277 [ ${!testname}x == x ] && return 0
4279 echo -n "checking grant......"
4281 local clients=$CLIENTS
4282 [ -z $clients ] && clients=$(hostname)
4284 # sync all the data and make sure no pending data on server
4285 do_nodes $clients sync
4288 client_grant=`do_nodes $clients \
4289 "$LCTL get_param -n osc.${FSNAME}-*.cur_*grant_bytes" | \
4290 awk '{total += $1} END{print total}'`
4293 server_grant=`do_nodes $(comma_list $(osts_nodes)) \
4294 "$LCTL get_param -n obdfilter.${FSNAME}-OST*.tot_granted" |
4295 awk '{total += $1} END{print total}'`
4297 # check whether client grant == server grant
4298 if [ $client_grant -ne $server_grant ]; then
4299 echo "failed: client:${client_grant} server: ${server_grant}."
4300 do_nodes $(comma_list $(osts_nodes)) \
4301 "$LCTL get_param obdfilter.${FSNAME}-OST*.tot*"
4302 do_nodes $clients "$LCTL get_param osc.${FSNAME}-*.cur_*_bytes"
4305 echo "pass: client:${client_grant} server: ${server_grant}"
4310 ########################
4316 ost=`echo $1 | awk -F_ '{print $3}'`
4317 if [ -z $ost ]; then
4318 ost=`echo $1 | sed 's/-osc.*//'`
4323 ostuuid_from_index()
4325 $LFS osts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
4328 ostname_from_index() {
4329 local uuid=$(ostuuid_from_index $1)
4333 index_from_ostuuid()
4335 $LFS osts $2 | sed -ne "/${1}/s/\(.*\): .* .*$/\1/p"
4338 mdtuuid_from_index()
4340 $LFS mdts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
4344 # Return unique identifier for given hostname
4347 echo $host_name | md5sum | cut -d' ' -f1
4351 # Returns list of ip addresses for each interface
4353 ip addr | awk '/inet\ / {print $2}' | awk -F\/ '{print $1}'
4358 # Cache address list to avoid mutiple execution of local_addr_list
4359 LOCAL_ADDR_LIST=${LOCAL_ADDR_LIST:-$(local_addr_list)}
4361 for i in $LOCAL_ADDR_LIST ; do
4362 [[ "$i" == "$addr" ]] && return 0
4369 local is_local="IS_LOCAL_$(host_id $host_name)"
4370 if [ -z "${!is_local-}" ] ; then
4372 local host_ip=$($LUSTRE/tests/resolveip $host_name)
4373 is_local_addr "$host_ip" && eval $is_local=1
4375 [[ "${!is_local}" == "1" ]]
4380 local_node $node && return 1
4387 for node in $(mdts_nodes); do
4388 remote_node $node && return 0
4395 [ "$CLIENTONLY" ] && return 0 || true
4396 remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
4401 remote_mds_nodsh && echo "SKIP: $TESTSUITE: remote MDS with nodsh" && \
4402 MSKIPPED=1 && return 1
4409 for node in $(osts_nodes) ; do
4410 remote_node $node && return 0
4417 [ "$CLIENTONLY" ] && return 0 || true
4418 remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
4423 remote_ost_nodsh && echo "SKIP: $TESTSUITE: remote OST with nodsh" && \
4424 OSKIPPED=1 && return 1
4431 MGS=$(facet_host mgs)
4432 remote_node $MGS && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
4437 remote_mds_nodsh || remote_ost_nodsh || \
4438 $(single_local_node $(comma_list $(nodes_list)))
4444 for num in `seq $MDSCOUNT`; do
4445 MDSNODES="$MDSNODES $(facet_host mds$num)"
4447 NODES_sort=$(for i in $MDSNODES; do echo $i; done | sort -u)
4453 remote_ost && remote_mds
4461 for facet in ${facets//,/ }; do
4462 if [ "$FAILURE_MODE" = HARD ]; then
4463 nodes="$nodes $(facet_active_host $facet)"
4465 nodes="$nodes $(facet_host $facet)"
4468 NODES_sort=$(for i in $nodes; do echo $i; done | sort -u)
4474 local facets=$(get_facets OST)
4475 local nodes=$(facets_nodes $facets)
4481 # FIXME. We need a list of clients
4482 local myNODES=$HOSTNAME
4485 # CLIENTS (if specified) contains the local client
4486 [ -n "$CLIENTS" ] && myNODES=${CLIENTS//,/ }
4488 if [ "$PDSH" -a "$PDSH" != "no_dsh" ]; then
4489 myNODES="$myNODES $(facets_nodes $(get_facets))"
4492 myNODES_sort=$(for i in $myNODES; do echo $i; done | sort -u)
4497 remote_nodes_list () {
4498 echo $(nodes_list) | sed -re "s/\<$HOSTNAME\>//g"
4501 init_clients_lists () {
4502 # Sanity check: exclude the local client from RCLIENTS
4503 local clients=$(hostlist_expand "$RCLIENTS")
4504 local rclients=$(exclude_items_from_list "$clients" $HOSTNAME)
4506 # Sanity check: exclude the dup entries
4507 RCLIENTS=$(for i in ${rclients//,/ }; do echo $i; done | sort -u)
4509 clients="$SINGLECLIENT $HOSTNAME $RCLIENTS"
4511 # Sanity check: exclude the dup entries from CLIENTS
4512 # for those configs which has SINGLCLIENT set to local client
4513 clients=$(for i in $clients; do echo $i; done | sort -u)
4515 CLIENTS=$(comma_list $clients)
4516 local -a remoteclients=($RCLIENTS)
4517 for ((i=0; $i<${#remoteclients[@]}; i++)); do
4518 varname=CLIENT$((i + 2))
4519 eval $varname=${remoteclients[i]}
4522 CLIENTCOUNT=$((${#remoteclients[@]} + 1))
4525 get_random_entry () {
4528 rnodes=${rnodes//,/ }
4530 local -a nodes=($rnodes)
4531 local num=${#nodes[@]}
4532 local i=$((RANDOM * num * 2 / 65536))
4538 [ "$CLIENTONLY" ] || [ "$CLIENTMODSONLY" = yes ]
4543 lctl get_param version | grep -q patchless
4547 [ "$(lustre_version_code client)" = "$(lustre_version_code $SINGLEMDS)" -a \
4548 "$(lustre_version_code client)" = "$(lustre_version_code ost1)" ]
4553 echo $nodes | wc -w || true
4557 local nodes=$(osts_nodes)
4558 local osscount=$(get_node_count "$nodes")
4559 [ ! "$OSTCOUNT" = "$osscount" ]
4563 local nodes=$(mdts_nodes)
4564 local mdtcount=$(get_node_count "$nodes")
4565 [ ! "$MDSCOUNT" = "$mdtcount" ]
4568 generate_machine_file() {
4569 local nodes=${1//,/ }
4570 local machinefile=$2
4572 for node in $nodes; do
4573 echo $node >>$machinefile || \
4574 { echo "can not generate machinefile $machinefile" && return 1; }
4579 local file=$1/stripe
4581 $LFS getstripe -v $file || error
4585 setstripe_nfsserver () {
4588 local nfsserver=$(awk '"'$dir'" ~ $2 && $3 ~ "nfs" && $2 != "/" \
4589 { print $1 }' /proc/mounts | cut -f 1 -d : | head -1)
4591 [ -z $nfsserver ] && echo "$dir is not nfs mounted" && return 1
4593 do_nodev $nfsserver lfs setstripe "$@"
4596 # Check and add a test group.
4602 local gid=$(getent group $group_name | cut -d: -f3)
4603 if [[ -n "$gid" ]]; then
4604 [[ "$gid" -eq "$group_id" ]] || {
4605 error_noexit "inconsistent group ID:" \
4606 "new: $group_id, old: $gid"
4610 groupadd -g $group_id $group_name
4617 # Check and add a test user.
4630 local uid=$(getent passwd $user_name | cut -d: -f3)
4631 if [[ -n "$uid" ]]; then
4632 if [[ "$uid" -eq "$user_id" ]]; then
4633 local dir=$(getent passwd $user_name | cut -d: -f6)
4634 if [[ "$dir" != "$home" ]]; then
4636 usermod -d $home $user_name
4640 error_noexit "inconsistent user ID:" \
4641 "new: $user_id, old: $uid"
4646 useradd -M -u $user_id -d $home -g $group_name $opts $user_name
4653 check_runas_id_ret() {
4655 local myRUNAS_UID=$1
4656 local myRUNAS_GID=$2
4659 if [ -z "$myRUNAS" ]; then
4660 error_exit "myRUNAS command must be specified for check_runas_id"
4663 $myRUNAS krb5_login.sh || \
4664 error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
4666 mkdir $DIR/d0_runas_test
4668 chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
4669 $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
4670 rm -rf $DIR/d0_runas_test
4675 local myRUNAS_UID=$1
4676 local myRUNAS_GID=$2
4679 check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
4680 error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
4681 Please set RUNAS_ID to some UID which exists on MDS and client or
4682 add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
4685 # obtain the UID/GID for MPI_USER
4689 MPI_USER_UID=$(do_facet client "getent passwd $mpi_user | cut -d: -f3;
4690 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the UID for $mpi_user"
4692 MPI_USER_GID=$(do_facet client "getent passwd $mpi_user | cut -d: -f4;
4693 exit \\\${PIPESTATUS[0]}") || error_exit "failed to get the GID for $mpi_user"
4696 # obtain and cache Kerberos ticket-granting ticket
4697 refresh_krb5_tgt() {
4698 local myRUNAS_UID=$1
4699 local myRUNAS_GID=$2
4702 if [ -z "$myRUNAS" ]; then
4703 error_exit "myRUNAS command must be specified for refresh_krb5_tgt"
4706 CLIENTS=${CLIENTS:-$HOSTNAME}
4707 do_nodes $CLIENTS "set -x
4708 if ! $myRUNAS krb5_login.sh; then
4709 echo "Failed to refresh Krb5 TGT for UID/GID $myRUNAS_UID/$myRUNAS_GID."
4714 # Run multiop in the background, but wait for it to print
4715 # "PAUSING" to its stdout before returning from this function.
4716 multiop_bg_pause() {
4717 MULTIOP_PROG=${MULTIOP_PROG:-$MULTIOP}
4721 TMPPIPE=/tmp/multiop_open_wait_pipe.$$
4724 echo "$MULTIOP_PROG $FILE v$ARGS"
4725 $MULTIOP_PROG $FILE v$ARGS > $TMPPIPE &
4727 echo "TMPPIPE=${TMPPIPE}"
4728 read -t 60 multiop_output < $TMPPIPE
4729 if [ $? -ne 0 ]; then
4734 if [ "$multiop_output" != "PAUSING" ]; then
4735 echo "Incorrect multiop output: $multiop_output"
4750 [ ${PIPESTATUS[0]} -eq 0 ] || rc=1
4756 inodes_available () {
4757 local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
4761 mdsrate_inodes_available () {
4762 local min_inodes=$(inodes_available)
4763 echo $((min_inodes * 99 / 100))
4766 # reset llite stat counters
4767 clear_llite_stats(){
4768 lctl set_param -n llite.*.stats 0
4771 # sum llite stat items
4772 calc_llite_stats() {
4773 local res=$(lctl get_param -n llite.*.stats |
4774 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
4778 # reset osc stat counters
4780 lctl set_param -n osc.*.osc_stats 0
4783 # sum osc stat items
4785 local res=$(lctl get_param -n osc.*.osc_stats |
4786 awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
4791 awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
4794 calc_osc_kbytes () {
4795 df $MOUNT > /dev/null
4796 $LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
4799 # save_lustre_params(node, parameter_mask)
4800 # generate a stream of formatted strings (<node> <param name>=<param value>)
4801 save_lustre_params() {
4803 do_nodesv $1 "lctl get_param $2 | while read s; do echo \\\$s; done"
4806 # restore lustre parameters from input stream, produces by save_lustre_params
4807 restore_lustre_params() {
4811 while IFS=" =" read node name val; do
4812 do_node ${node//:/} "lctl set_param -n $name $val"
4816 check_catastrophe() {
4817 local rnodes=${1:-$(comma_list $(remote_nodes_list))}
4818 local C=$CATASTROPHE
4819 [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
4821 [ -z "$rnodes" ] && return 0
4823 do_nodes "$rnodes" "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
4824 if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
4828 # CMD: determine mds index where directory inode presents
4831 local file=$dir/f0.get_mds_dir_tmpfile
4836 local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
4837 local -a oldused=($iused)
4839 openfile -f O_CREAT:O_LOV_DELAY_CREATE -m 0644 $file > /dev/null
4841 iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
4842 local -a newused=($iused)
4845 for ((i=0; i<${#newused[@]}; i++)); do
4846 if [ ${oldused[$i]} -lt ${newused[$i]} ]; then
4852 error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
4855 mdsrate_cleanup () {
4857 mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
4862 delayed_recovery_enabled () {
4863 local var=${SINGLEMDS}_svc
4864 do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
4867 ########################
4869 convert_facet2label() {
4872 if [ x$facet = xost ]; then
4876 local varsvc=${facet}_svc
4878 if [ -n ${!varsvc} ]; then
4881 error "No lablel for $facet!"
4885 get_clientosc_proc_path() {
4886 echo "${1}-osc-[^M]*"
4889 get_lustre_version () {
4890 local facet=${1:-"$SINGLEMDS"}
4891 do_facet $facet $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
4894 lustre_version_code() {
4895 local facet=${1:-"$SINGLEMDS"}
4896 version_code $(get_lustre_version $1)
4899 # If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
4900 # used by MDT would not be changed.
4901 # mdt lov: fsname-mdtlov
4902 # mdt osc: fsname-OSTXXXX-osc
4903 mds_on_old_device() {
4904 local mds=${1:-"$SINGLEMDS"}
4906 if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
4907 do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
4908 > /dev/null 2>&1" && return 0
4913 get_mdtosc_proc_path() {
4915 local ost_label=${2:-"*OST*"}
4917 [ "$mds_facet" = "mds" ] && mds_facet=$SINGLEMDS
4918 local mdt_label=$(convert_facet2label $mds_facet)
4919 local mdt_index=$(echo $mdt_label | sed -e 's/^.*-//')
4921 if [ $(lustre_version_code $mds_facet) -le $(version_code 1.8.0) ] ||
4922 mds_on_old_device $mds_facet; then
4923 echo "${ost_label}-osc"
4925 echo "${ost_label}-osc-${mdt_index}"
4929 get_osc_import_name() {
4932 local label=$(convert_facet2label $ost)
4934 if [ "${facet:0:3}" = "mds" ]; then
4935 get_mdtosc_proc_path $facet $label
4939 get_clientosc_proc_path $label
4943 _wait_import_state () {
4946 local maxtime=${3:-$(max_recovery_time)}
4950 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4951 while [ "${CONN_STATE}" != "${expected}" ]; do
4952 if [ "${expected}" == "DISCONN" ]; then
4953 # for disconn we can check after proc entry is removed
4954 [ "x${CONN_STATE}" == "x" ] && return 0
4955 # with AT enabled, we can have connect request timeout near of
4956 # reconnect timeout and test can't see real disconnect
4957 [ "${CONN_STATE}" == "CONNECTING" ] && return 0
4959 [ $i -ge $maxtime ] && \
4960 error "can't put import for $CONN_PROC into ${expected} state after $i sec, have ${CONN_STATE}" && \
4963 CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
4967 log "$CONN_PROC in ${CONN_STATE} state after $i sec"
4971 wait_import_state() {
4974 local maxtime=${3:-$(max_recovery_time)}
4977 for param in ${params//,/ }; do
4978 _wait_import_state $state $param $maxtime || return
4982 # One client request could be timed out because server was not ready
4983 # when request was sent by client.
4984 # The request timeout calculation details :
4986 # /* We give the server rq_timeout secs to process the req, and
4987 # add the network latency for our local timeout. */
4988 # request->rq_deadline = request->rq_sent + request->rq_timeout +
4989 # ptlrpc_at_get_net_latency(request) ;
4991 # ptlrpc_connect_import ()
4992 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
4995 # -> at_init(&at->iat_net_latency, 0, 0) -> iat_net_latency=0
4996 # ptlrpc_at_get_net_latency(request) ->
4997 # at_get (max (iat_net_latency=0, at_min)) = at_min
5000 # request->rq_timeout + ptlrpc_at_get_net_latency(request) =
5001 # INITIAL_CONNECT_TIMEOUT + at_min
5003 # We will use obd_timeout instead of INITIAL_CONNECT_TIMEOUT
5004 # because we can not get this value in runtime,
5005 # the value depends on configure options, and it is not stored in /proc.
5007 # #define CONNECTION_SWITCH_MIN 5U
5008 # #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
5010 request_timeout () {
5013 # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
5014 local init_connect_timeout=$TIMEOUT
5015 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
5017 local at_min=$(at_get $facet at_min)
5019 echo $(( init_connect_timeout + at_min ))
5022 wait_osc_import_state() {
5026 local ost=$(get_osc_import_name $facet $ost_facet)
5028 local param="osc.${ost}.ost_server_uuid"
5030 # 1. wait the deadline of client 1st request (it could be skipped)
5031 # 2. wait the deadline of client 2nd request
5032 local maxtime=$(( 2 * $(request_timeout $facet)))
5034 if ! do_rpc_nodes "$(facet_host $facet)" \
5035 _wait_import_state $expected $param $maxtime; then
5036 error "import is not in ${expected} state"
5043 get_clientmdc_proc_path() {
5051 [ -z "$list" ] && return 0
5053 # Add paths to lustre tests for 32 and 64 bit systems.
5054 local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
5055 do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
5058 wait_clients_import_state () {
5065 if [ "$FAILURE_MODE" = HARD ]; then
5066 facets=$(facets_on_host $(facet_active_host $facet))
5069 for facet in ${facets//,/ }; do
5070 local label=$(convert_facet2label $facet)
5073 ost* ) proc_path="osc.$(get_clientosc_proc_path $label).ost_server_uuid" ;;
5074 mds* ) proc_path="mdc.$(get_clientmdc_proc_path $label).mds_server_uuid" ;;
5075 *) error "unknown facet!" ;;
5077 local params=$(expand_list $params $proc_path)
5080 if ! do_rpc_nodes "$list" wait_import_state $expected $params; then
5081 error "import is not in ${expected} state"
5091 AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
5092 $LCTL get_param obdfilter.*.kbytesavail))
5093 GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
5094 $LCTL get_param -n obdfilter.*.tot_granted))
5095 TOTALA=($(do_nodes $(comma_list $(osts_nodes)) \
5096 $LCTL get_param -n obdfilter.*.kbytestotal))
5097 for ((i=0; i<${#AVAILA[@]}; i++)); do
5098 local -a AVAIL1=(${AVAILA[$i]//=/ })
5099 local -a TOTAL=(${TOTALA[$i]//=/ })
5100 GRANT=$((${GRANTA[$i]}/1024))
5101 # allow 1% of total space in bavail because of delayed
5102 # allocation with ZFS which might release some free space after
5103 # txg commit. For small devices, we set a mininum of 8MB
5104 local LIMIT=$((${TOTAL} / 100 + 8000))
5105 echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} \
5106 grnt=$GRANT diff=$((AVAIL1[1] - GRANT)) limit=${LIMIT}
5107 [ $((AVAIL1[1] - GRANT)) -lt $LIMIT ] && OSCFULL=0 && \
5108 echo " FULL" || echo
5114 do_facet mgs lctl pool_list $1
5118 local fsname=${1%%.*}
5119 local poolname=${1##$fsname.}
5121 do_facet mgs lctl pool_new $1
5123 # get param should return err unless pool is created
5124 [[ $RC -ne 0 ]] && return $RC
5126 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
5127 2>/dev/null || echo foo" "" || RC=1
5128 if [[ $RC -eq 0 ]]; then
5131 error "pool_new failed $1"
5136 add_pool_to_list () {
5137 local fsname=${1%%.*}
5138 local poolname=${1##$fsname.}
5140 local listvar=${fsname}_CREATED_POOLS
5141 eval export ${listvar}=$(expand_list ${!listvar} $poolname)
5144 remove_pool_from_list () {
5145 local fsname=${1%%.*}
5146 local poolname=${1##$fsname.}
5148 local listvar=${fsname}_CREATED_POOLS
5149 eval export ${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
5152 destroy_pool_int() {
5154 local OSTS=$(do_facet $SINGLEMDS lctl pool_list $1 | \
5155 awk '$1 !~ /^Pool:/ {print $1}')
5156 for ost in $OSTS; do
5157 do_facet mgs lctl pool_remove $1 $ost
5159 do_facet mgs lctl pool_destroy $1
5162 # <fsname>.<poolname> or <poolname>
5164 local fsname=${1%%.*}
5165 local poolname=${1##$fsname.}
5167 [[ x$fsname = x$poolname ]] && fsname=$FSNAME
5171 pool_list $fsname.$poolname || return $?
5173 destroy_pool_int $fsname.$poolname
5175 [[ $RC -ne 0 ]] && return $RC
5177 wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
5178 2>/dev/null || echo foo" "foo" || RC=1
5180 if [[ $RC -eq 0 ]]; then
5181 remove_pool_from_list $fsname.$poolname
5183 error "destroy pool failed $1"
5189 local fsname=${1:-$FSNAME}
5191 local listvar=${fsname}_CREATED_POOLS
5195 [ x${!listvar} = x ] && return 0
5197 echo destroy the created pools: ${!listvar}
5198 for poolname in ${!listvar//,/ }; do
5199 destroy_pool $fsname.$poolname
5204 local fsname=${1:-$FSNAME}
5206 destroy_pools $fsname
5212 local ts=$(date +%s)
5215 if [[ ! -f "$YAML_LOG" ]]; then
5216 # init_logging is not performed before gather_logs,
5217 # so the $LOGDIR needs to be checked here
5218 check_shared_dir $LOGDIR && touch $LOGDIR/shared
5221 [ -f $LOGDIR/shared ] && docp=false
5223 # dump lustre logs, dmesg
5225 prefix="$TESTLOG_PREFIX.$TESTNAME"
5227 echo "Dumping lctl log to ${prefix}.*.${suffix}"
5229 if [ "$CLIENTONLY" -o "$PDSH" == "no_dsh" ]; then
5230 echo "Dumping logs only on local client."
5231 $LCTL dk > ${prefix}.debug_log.$(hostname -s).${suffix}
5232 dmesg > ${prefix}.dmesg.$(hostname -s).${suffix}
5237 "$LCTL dk > ${prefix}.debug_log.\\\$(hostname -s).${suffix};
5238 dmesg > ${prefix}.dmesg.\\\$(hostname -s).${suffix}"
5239 if [ ! -f $LOGDIR/shared ]; then
5240 do_nodes $list rsync -az "${prefix}.*.${suffix}" $HOSTNAME:$LOGDIR
5253 for i in $(seq 0 $num_mntpts); do
5254 cmd="ls -laf ${mntpt_root}$i/$dir"
5260 for pid in $pids; do
5267 # target_start_and_reset_recovery_timer()
5268 # service_time = at_est2timeout(service_time);
5269 # service_time += 2 * (CONNECTION_SWITCH_MAX + CONNECTION_SWITCH_INC +
5270 # INITIAL_CONNECT_TIMEOUT);
5271 # CONNECTION_SWITCH_MAX : min(25U, max(CONNECTION_SWITCH_MIN,obd_timeout))
5272 #define CONNECTION_SWITCH_INC 1
5273 #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
5274 #define CONNECTION_SWITCH_MIN 5U
5276 max_recovery_time () {
5277 local init_connect_timeout=$(( TIMEOUT / 20 ))
5278 [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
5280 local service_time=$(( $(at_max_get client) + $(( 2 * $(( 25 + 1 + init_connect_timeout)) )) ))
5285 get_clients_mount_count () {
5286 local clients=${CLIENTS:-`hostname`}
5288 # we need to take into account the clients mounts and
5289 # exclude mds/ost mounts if any;
5290 do_nodes $clients cat /proc/mounts | grep lustre | grep $MOUNT | wc -l
5294 PROC_CLI="srpc_info"
5302 if [ $M -lt $N ]; then
5306 while [ $N -lt $M ]; do
5316 calc_connection_cnt() {
5319 # MDT->MDT = 2 * C(M, 2)
5323 comb_m2=$(combination $MDSCOUNT 2)
5325 local num_clients=$(get_clients_mount_count)
5327 local cnt_mdt2mdt=$((comb_m2 * 2))
5328 local cnt_mdt2ost=$((MDSCOUNT * OSTCOUNT))
5329 local cnt_cli2ost=$((num_clients * OSTCOUNT))
5330 local cnt_cli2mdt=$((num_clients * MDSCOUNT))
5331 local cnt_all2ost=$((cnt_mdt2ost + cnt_cli2ost))
5332 local cnt_all2mdt=$((cnt_mdt2mdt + cnt_cli2mdt))
5333 local cnt_all2all=$((cnt_mdt2ost + cnt_mdt2mdt + cnt_cli2ost + cnt_cli2mdt))
5347 local cmd="$tgt.srpc.flavor"
5349 if [ $net == "any" ]; then
5354 if [ $dir != "any" ]; then
5359 log "Setting sptlrpc rule: $cmd"
5360 do_facet mgs "$LCTL conf_param $cmd"
5369 rpc_flvr=`echo $flavor | awk -F - '{ print $1 }'`
5370 bulkspec=`echo $flavor | awk -F - '{ print $2 }'`
5372 count=`echo "$output" | grep "rpc flavor" | grep $rpc_flvr | wc -l`
5374 if [ "x$bulkspec" != "x" ]; then
5375 algs=`echo $bulkspec | awk -F : '{ print $2 }'`
5377 if [ "x$algs" != "x" ]; then
5378 bulk_count=`echo "$output" | grep "bulk flavor" | grep $algs | wc -l`
5380 bulk=`echo $bulkspec | awk -F : '{ print $1 }'`
5381 if [ $bulk == "bulkn" ]; then
5382 bulk_count=`echo "$output" | grep "bulk flavor" \
5383 | grep "null/null" | wc -l`
5384 elif [ $bulk == "bulki" ]; then
5385 bulk_count=`echo "$output" | grep "bulk flavor" \
5386 | grep "/null" | grep -v "null/" | wc -l`
5388 bulk_count=`echo "$output" | grep "bulk flavor" \
5389 | grep -v "/null" | grep -v "null/" | wc -l`
5393 [ $bulk_count -lt $count ] && count=$bulk_count
5404 local clients=${CLIENTS:-`hostname`}
5406 for c in ${clients//,/ }; do
5407 output=`do_node $c lctl get_param -n mdc.*-MDT*-mdc-*.$PROC_CLI 2>/dev/null`
5408 tmpcnt=`count_flvr "$output" $flavor`
5409 cnt=$((cnt + tmpcnt))
5419 local clients=${CLIENTS:-`hostname`}
5421 for c in ${clients//,/ }; do
5422 output=`do_node $c lctl get_param -n osc.*OST*-osc-[^M][^D][^T]*.$PROC_CLI 2>/dev/null`
5423 tmpcnt=`count_flvr "$output" $flavor`
5424 cnt=$((cnt + tmpcnt))
5434 if [ $MDSCOUNT -le 1 ]; then
5439 for num in `seq $MDSCOUNT`; do
5440 output=`do_facet mds$num lctl get_param -n mdc.*-MDT*-mdc[0-9]*.$PROC_CLI 2>/dev/null`
5441 tmpcnt=`count_flvr "$output" $flavor`
5442 cnt=$((cnt + tmpcnt))
5453 for num in `seq $MDSCOUNT`; do
5454 mdtosc=$(get_mdtosc_proc_path mds$num)
5455 mdtosc=${mdtosc/-MDT*/-MDT\*}
5456 output=$(do_facet mds$num lctl get_param -n \
5457 osc.$mdtosc.$PROC_CLI 2>/dev/null)
5458 tmpcnt=`count_flvr "$output" $flavor`
5459 cnt=$((cnt + tmpcnt))
5468 output=`do_facet client lctl get_param -n mgc.*.$PROC_CLI 2>/dev/null`
5469 count_flvr "$output" $flavor
5474 local dir=$1 # from to
5475 local flavor=$2 # flavor expected
5478 if [ $dir == "cli2mdt" ]; then
5479 res=`flvr_cnt_cli2mdt $flavor`
5480 elif [ $dir == "cli2ost" ]; then
5481 res=`flvr_cnt_cli2ost $flavor`
5482 elif [ $dir == "mdt2mdt" ]; then
5483 res=`flvr_cnt_mdt2mdt $flavor`
5484 elif [ $dir == "mdt2ost" ]; then
5485 res=`flvr_cnt_mdt2ost $flavor`
5486 elif [ $dir == "all2ost" ]; then
5487 res1=`flvr_cnt_mdt2ost $flavor`
5488 res2=`flvr_cnt_cli2ost $flavor`
5489 res=$((res1 + res2))
5490 elif [ $dir == "all2mdt" ]; then
5491 res1=`flvr_cnt_mdt2mdt $flavor`
5492 res2=`flvr_cnt_cli2mdt $flavor`
5493 res=$((res1 + res2))
5494 elif [ $dir == "all2all" ]; then
5495 res1=`flvr_cnt_mdt2ost $flavor`
5496 res2=`flvr_cnt_cli2ost $flavor`
5497 res3=`flvr_cnt_mdt2mdt $flavor`
5498 res4=`flvr_cnt_cli2mdt $flavor`
5499 res=$((res1 + res2 + res3 + res4))
5507 local dir=$1 # from to
5508 local flavor=$2 # flavor expected
5509 local expect=${3:-$(calc_connection_cnt $dir)} # number expected
5513 for ((i=0;i<20;i++)); do
5514 echo -n "checking $dir..."
5515 res=$(do_check_flavor $dir $flavor)
5516 echo "found $res/$expect $flavor connections"
5517 [ $res -ge $expect ] && return 0
5521 echo "Error checking $flavor of $dir: expect $expect, actual $res"
5525 restore_to_default_flavor()
5527 local proc="mgs.MGS.live.$FSNAME"
5529 echo "restoring to default flavor..."
5531 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
5533 # remove all existing rules if any
5534 if [ $nrule -ne 0 ]; then
5535 echo "$nrule existing rules"
5536 for rule in `do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor."`; do
5537 echo "remove rule: $rule"
5538 spec=`echo $rule | awk -F = '{print $1}'`
5539 do_facet mgs "$LCTL conf_param -d $spec"
5543 # verify no rules left
5544 nrule=`do_facet mgs lctl get_param -n $proc 2>/dev/null | grep ".srpc.flavor." | wc -l`
5545 [ $nrule -ne 0 ] && error "still $nrule rules left"
5547 # wait for default flavor to be applied
5548 # currently default flavor for all connections are 'null'
5549 wait_flavor all2all null
5550 echo "now at default flavor settings"
5555 local flavor=${1:-null}
5557 echo "setting all flavor to $flavor"
5559 # FIXME need parameter to this fn
5560 # and remove global vars
5561 local cnt_all2all=$(calc_connection_cnt all2all)
5563 local res=$(do_check_flavor all2all $flavor)
5564 if [ $res -eq $cnt_all2all ]; then
5565 echo "already have total $res $flavor connections"
5569 echo "found $res $flavor out of total $cnt_all2all connections"
5570 restore_to_default_flavor
5572 [[ $flavor = null ]] && return 0
5574 set_rule $FSNAME any any $flavor
5575 wait_flavor all2all $flavor
5581 # Checking for shared logdir
5582 if [ ! -d $dir ]; then
5583 # Not found. Create local logdir
5586 touch $dir/check_file.$(hostname -s)
5591 check_write_access() {
5596 for node in $(nodes_list); do
5597 file=$dir/check_file.$(short_hostname $node)
5598 if [[ ! -f "$file" ]]; then
5599 # Logdir not accessible/writable from this node.
5602 rm -f $file || return 1
5608 if [[ -n $YAML_LOG ]]; then
5611 local SAVE_UMASK=`umask`
5614 export YAML_LOG=${LOGDIR}/results.yml
5618 if [ ! -f $YAML_LOG ]; then # If the yaml log already exists then we will just append to it
5619 if check_shared_dir $LOGDIR; then
5620 touch $LOGDIR/shared
5621 echo "Logging to shared log directory: $LOGDIR"
5623 echo "Logging to local directory: $LOGDIR"
5626 yml_nodes_file $LOGDIR >> $YAML_LOG
5627 yml_results_file >> $YAML_LOG
5634 yml_log_test $1 >> $YAML_LOG
5638 yml_log_test_status $@ >> $YAML_LOG
5641 log_sub_test_begin() {
5642 yml_log_sub_test_begin "$@" >> $YAML_LOG
5645 log_sub_test_end() {
5646 yml_log_sub_test_end "$@" >> $YAML_LOG
5652 local llverdev_opts=$2
5653 local devname=$(basename $1)
5654 local size=$(grep "$devname"$ /proc/partitions | awk '{print $3}')
5655 # loop devices aren't in /proc/partitions
5656 [ "x$size" == "x" ] && local size=$(ls -l $dev | awk '{print $5}')
5658 size=$(($size / 1024 / 1024)) # Gb
5660 local partial_arg=""
5661 # Run in partial (fast) mode if the size
5662 # of a partition > 1 GB
5663 [ $size -gt 1 ] && partial_arg="-p"
5665 llverdev --force $partial_arg $llverdev_opts $dev
5671 local llverfs_opts=$2
5672 local use_partial_arg=$3
5673 local partial_arg=""
5674 local size=$(df -B G $dir |tail -n 1 |awk '{print $2}' |sed 's/G//') #GB
5676 # Run in partial (fast) mode if the size
5677 # of a partition > 1 GB
5678 [ "x$use_partial_arg" != "xno" ] && [ $size -gt 1 ] && partial_arg="-p"
5680 llverfs $partial_arg $llverfs_opts $dir
5683 remove_mdt_files() {
5688 local mntpt=$(facet_mntpt $facet)
5689 local opts=$MDS_MOUNT_OPTS
5691 echo "removing files from $mdtdev on $facet: $files"
5692 if [ $(facet_fstype $facet) == ldiskfs ] &&
5693 ! do_facet $facet test -b ${!dev}; then
5694 opts=$(csa_add "$opts" -o loop)
5696 mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
5700 rm $mntpt/ROOT/$f || { rc=$?; break; }
5702 umount -f $mntpt || return $?
5706 duplicate_mdt_files() {
5711 local mntpt=$(facet_mntpt $facet)
5712 local opts=$MDS_MOUNT_OPTS
5714 echo "duplicating files on $mdtdev on $facet: $files"
5715 mkdir -p $mntpt || return $?
5716 if [ $(facet_fstype $facet) == ldiskfs ] &&
5717 ! do_facet $facet test -b ${!dev}; then
5718 opts=$(csa_add "$opts" -o loop)
5720 mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
5731 tmp=$(mktemp $TMP/setfattr.XXXXXXXXXX)
5732 pushd $mntpt/ROOT > /dev/null || return $?
5735 touch $f.bad || return $?
5736 getfattr -n trusted.lov $f | sed "s#$f#&.bad#" > $tmp
5738 [ $rc -eq 0 ] || return $rc
5739 setfattr --restore $tmp || return $?
5745 local devs=${1//,/ }
5748 local rslt=$TMP/sgpdd_survey
5750 # sgpdd-survey cleanups ${rslt}.* files
5752 local cmd="rslt=$rslt $params scsidevs=\"$devs\" $SGPDDSURVEY"
5758 # returns the canonical name for an ldiskfs device
5763 do_facet $facet "dv=\\\$(lctl get_param -n $dev);
5764 if foo=\\\$(lvdisplay -c \\\$dv 2>/dev/null); then
5765 echo dm-\\\${foo##*:};
5767 echo \\\$(basename \\\$dv);
5771 is_sanity_benchmark() {
5772 local benchmarks="dbench bonnie iozone fsx"
5774 for b in $benchmarks; do
5775 if [ "$b" == "$suite" ]; then
5783 $LCTL get_param -n osc.*.kbytesavail | sort -n | head -n1
5786 # Get the block size of the filesystem.
5792 size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
5793 awk '/^Block size:/ {print $3}')
5797 # Check whether the "large_xattr" feature is enabled or not.
5798 large_xattr_enabled() {
5799 [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 0
5801 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
5803 do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
5804 return ${PIPESTATUS[0]}
5807 # Get the maximum xattr size supported by the filesystem.
5811 if large_xattr_enabled; then
5812 # include/linux/limits.h: #define XATTR_SIZE_MAX 65536
5815 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
5816 local block_size=$(get_block_size $SINGLEMDS $mds_dev)
5818 # maximum xattr size = size of block - size of header -
5819 # size of 1 entry - 4 null bytes
5820 size=$((block_size - 32 - 32 - 4))
5826 # Dump the value of the named xattr from a file.
5831 echo "$(getfattr -n $xattr_name --absolute-names --only-values $file)"
5834 # Generate a string with size of $size bytes.
5836 local size=${1:-1024} # in bytes
5838 echo "$(head -c $size < /dev/zero | tr '\0' y)"
5841 reformat_external_journal() {
5842 if [ ! -z ${EJOURNAL} ]; then
5843 local rcmd="do_facet ${SINGLEMDS}"
5845 echo "reformat external journal on ${SINGLEMDS}:${EJOURNAL}"
5846 ${rcmd} mke2fs -O journal_dev ${EJOURNAL} || return 1
5850 # MDT file-level backup/restore
5851 mds_backup_restore() {
5852 local devname=$(mdsdevname ${SINGLEMDS//mds/})
5853 local mntpt=$(facet_mntpt brpt)
5854 local rcmd="do_facet ${SINGLEMDS}"
5855 local metaea=${TMP}/backup_restore.ea
5856 local metadata=${TMP}/backup_restore.tgz
5857 local opts=${MDS_MOUNT_OPTS}
5858 local svc=${SINGLEMDS}_svc
5860 if ! ${rcmd} test -b ${devname}; then
5861 opts=$(csa_add "$opts" -o loop)
5864 echo "file-level backup/restore on ${SINGLEMDS}:${devname}"
5866 # step 1: build mount point
5867 ${rcmd} mkdir -p $mntpt
5868 # step 2: cleanup old backup
5869 ${rcmd} rm -f $metaea $metadata
5871 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
5872 # step 4: backup metaea
5874 ${rcmd} "cd $mntpt && getfattr -R -d -m '.*' -P . > $metaea && cd -" ||
5876 # step 5: backup metadata
5878 ${rcmd} tar zcf $metadata -C $mntpt/ . > /dev/null 2>&1 || return 3
5880 ${rcmd} umount -d $mntpt || return 4
5881 # step 7: reformat external journal if needed
5882 reformat_external_journal || return 5
5883 # step 8: reformat dev
5884 echo "reformat new device"
5885 add ${SINGLEMDS} $(mkfs_opts ${SINGLEMDS}) --backfstype ldiskfs \
5886 --reformat $devname > /dev/null || return 6
5888 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 7
5889 # step 10: restore metadata
5891 ${rcmd} tar zxfp $metadata -C $mntpt > /dev/null 2>&1 || return 8
5892 # step 11: restore metaea
5894 ${rcmd} "cd $mntpt && setfattr --restore=$metaea && cd - " || return 9
5895 # step 12: remove recovery logs
5896 echo "remove recovery logs"
5897 ${rcmd} rm -fv $mntpt/OBJECTS/* $mntpt/CATALOGS
5898 # step 13: umount dev
5899 ${rcmd} umount -d $mntpt || return 10
5900 # step 14: cleanup tmp backup
5901 ${rcmd} rm -f $metaea $metadata
5902 # step 15: reset device label - it's not virgin on
5903 ${rcmd} e2label $devname ${!svc}
5908 local devname=$(mdsdevname ${SINGLEMDS//mds/})
5909 local mntpt=$(facet_mntpt brpt)
5910 local rcmd="do_facet ${SINGLEMDS}"
5912 local opts=${MDS_MOUNT_OPTS}
5914 if ! ${rcmd} test -b ${devname}; then
5915 opts=$(csa_add "$opts" -o loop)
5918 echo "remove OI files: idx=${idx}"
5920 # step 1: build mount point
5921 ${rcmd} mkdir -p $mntpt
5923 ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
5924 if [ -z $idx ]; then
5925 # step 3: remove all OI files
5926 ${rcmd} rm -fv $mntpt/oi.16*
5927 elif [ $idx -lt 2 ]; then
5928 ${rcmd} rm -fv $mntpt/oi.16.${idx}
5932 # others, rm oi.16.[idx, idx * idx, idx ** ...]
5933 for ((i=${idx}; i<64; i=$((i * idx)))); do
5934 ${rcmd} rm -fv $mntpt/oi.16.${i}
5938 ${rcmd} umount -d $mntpt || return 2
5939 # OI files will be recreated when mounted as lustre next time.
5942 # generate maloo upload-able log file name
5943 # \param logname specify unique part of file name
5944 generate_logname() {
5945 local logname=${1:-"default_logname"}
5947 echo "$TESTLOG_PREFIX.$TESTNAME.$logname.$(hostname -s).log"
5950 # mkdir directory on different MDTs
5959 if [ $# -eq 2 ]; then
5969 if [ "$parent" == "$child" ]; then
5973 if [ "$option" == "-p" -a -d ${parent}/${child} ]; then
5977 # it needs to check whether there is further / in child
5978 dir=$(echo $child | awk -F '/' '{print $2}')
5979 if [ ! -z "$dir" ]; then
5980 local subparent=$(echo $child | awk -F '/' '{ print $1 }')
5981 parent=${parent}"/"${subparent}
5985 if [ ! -d ${parent} ]; then
5986 if [ "$option" == "-p" ]; then
5993 if [ $MDSCOUNT -le 1 ]; then
5994 mkdir $option ${parent}/${child} || rc=$?
5996 local mdt_idx=$($LFS getstripe -M $parent)
5998 if [ "$mdt_idx" -ne 0 ]; then
5999 mkdir $option ${parent}/${child} || rc=$?
6003 local test_num=$(echo $testnum | sed -e 's/[^0-9]*//g')
6004 local mdt_idx=$((test_num % MDSCOUNT))
6005 echo "mkdir $mdt_idx for ${parent}/${child}"
6006 $LFS setdirstripe -i $mdt_idx ${parent}/${child} || rc=$?