[doc/protocol.git] / export.txt

Export
^^^^^^
[[obd-export]]

An 'obd_export' structure for a given target is created on a server
for each client that connects to that target. The exports for all the
clients for a given target are managed together. The export represents
the connection state between the client and target as well as the
current state of any ongoing activity. Thus each pending request will
have a reference to the export. The export is discarded if the
connection goes away, but only after all the references to it have
been cleaned up. Some state information for each export is also
maintained on disk. In the event of a server failure and recovery,
the server can read the export data from disk to allow the client
to reconnect and participate in recovery, otherwise a client without
any export data will not be allowed to participate in recovery.

[source,c]
----
struct obd_export {
        struct portals_handle     exp_handle;
        struct obd_uuid           exp_client_uuid;
        struct obd_connect_data   exp_connect_data;
};
----

//////////////////////////////////////////////////////////////////////
////vvvv
This is the full obd_export.

struct obd_export {
        struct portals_handle     exp_handle;
        atomic_t   exp_refcount;
        atomic_t   exp_rpc_count;
        atomic_t   exp_cb_count;
        atomic_t   exp_replay_count;
        atomic_t   exp_locks_count;
        struct obd_uuid           exp_client_uuid;
        cfs_list_t exp_obd_chain;
        cfs_hlist_node_t      exp_uuid_hash;
        cfs_hlist_node_t      exp_nid_hash;
        cfs_list_t            exp_obd_chain_timed;
        struct obd_device    *exp_obd;
        struct obd_import    *exp_imp_reverse;
        struct nid_stat      *exp_nid_stats;
        struct ptlrpc_connection *exp_connection;
        __u32       exp_conn_cnt;
        cfs_hash_t *exp_lock_hash;
        cfs_hash_t *exp_flock_hash;
        cfs_list_t  exp_outstanding_replies;
        cfs_list_t  exp_uncommitted_replies;
        spinlock_t  exp_uncommitted_replies_lock;
        __u64       exp_last_committed;
        cfs_time_t  exp_last_request_time;
        cfs_list_t  exp_req_replay_queue;
        spinlock_t  exp_lock;
        struct obd_connect_data   exp_connect_data;
        enum obd_option       exp_flags;
        unsigned long
                exp_failed:1,
                exp_in_recovery:1,
                exp_disconnected:1,
                exp_connecting:1,
                exp_delayed:1,
                exp_vbr_failed:1,
                exp_req_replay_needed:1,
                exp_lock_replay_needed:1,
                exp_need_sync:1,
                exp_flvr_changed:1,
                exp_flvr_adapt:1,
                exp_libclient:1,
                exp_need_mne_swab:1;
        enum lustre_sec_part      exp_sp_peer;
        struct sptlrpc_flavor     exp_flvr;
        struct sptlrpc_flavor     exp_flvr_old[2];
        cfs_time_t exp_flvr_expire[2];
        spinlock_t exp_rpc_lock;
        cfs_list_t exp_hp_rpcs;
        cfs_list_t exp_reg_rpcs;
        cfs_list_t exp_bl_list;
        spinlock_t exp_bl_list_lock;
        union {
                struct tg_export_data     eu_target_data;
                struct mdt_export_data    eu_mdt_data;
                struct filter_export_data eu_filter_data;
                struct ec_export_data     eu_ec_data;
                struct mgs_export_data    eu_mgs_data;
        } u;
        struct nodemap      *exp_nodemap;
};
////^^^^
//////////////////////////////////////////////////////////////////////

The 'exp_handle' holds the cookie that the server generates at
*_CONNECT time to uniquely identify this connection from the client.
This cookie is also sent back to the client in the reply and is
then stored in the client's import.

//////////////////////////////////////////////////////////////////////
////vvvv
The 'exp_refcount' gets incremented whenever some aspect of the export
is "in use". The arrival of an otherwise unprocessed message for this
target will increment the refcount. A reference by an LDLM lock that
gets taken will increment the refcount. Callback invocations and
replay also lead to incrementing the 'ref_count'. The next four fields
- 'exp_rpc_count', exp_cb_count', and 'exp_replay_count', and
'exp_locks_count' - all subcategorize the 'exp_refcount'. The
reference counter keeps the export alive while there are any users of
that export. The reference counter is also used for debug
purposes. Similarly, the 'exp_locks_list' and 'exp_locks_list_guard'
are further debug info that list the actual locks accounted for in
'exp_locks_count'.
////^^^^
//////////////////////////////////////////////////////////////////////

include::struct_obd_uuid.txt[]

The 'exp_client_uuid' holds the UUID of the client connected to this
export.  This UUID is randomly generated by the client and the same
UUID is used by the client for connecting to all servers, so that
the servers may identify the client amongst themselves if necessary.

//////////////////////////////////////////////////////////////////////
////vvvv
The server maintains all the exports for a given target on a circular
list. Each export's place on that list is maintained in the
'exp_obd_chain'. A common activity is to look up the export based on
the UUID or the nid of the client, and the 'exp_uuid_hash' and
'exp_nid_hash' fields maintain this export's place in hashes
constructed for that purpose.

Exports are also maintained on a list sorted by the last time the
corresponding client was heard from. The 'exp_obd_chain_timed' field
maintains the export's place on that list. When a message arrives from
the client the time is "now" so the export gets put at the end of the
list. Since it is circular, the next export is then the oldest. If it
has not been heard of within its timeout interval that export is
marked for later eviction.

The 'exp_obd' points to the 'obd_device' structure for the device that
is the target of this export.

In the event of an LDLM call-back the export needs to have a the ability to
initiate messages back to the client. The 'exp_imp_reverse' provides a
"reverse" import that manages this capability.

The '/proc' stats for the export (and the target) get updated via the
'exp_nid_stats'.

The 'exp_connection' points to the connection information for this
export. This is the information about the actual networking pathway(s)
that get used for communication.

The 'exp_conn_cnt' notes the connection count value from the client at
the time of the connection. In the event that more than one connection
request is issued before the connection is established then the
'exp_conn_cnt' will list the highest value. If a previous connection
attempt (with a lower value) arrives later it may be safely
discarded. Every request lists its connection count, so non-connection
requests with lower connection count values can also be discarded.
Note that this does not count how many times the client has connected
to the target. If a client is evicted the export is deleted once it
has been cleaned up and its 'exp_ref_count' reduced to zero. A new
connection from the client will get a new export.

The 'exp_lock_hash' provides access to the locks granted to the
corresponding client for this target. If a lock cannot be granted it
is discarded. A file system lock ("flock") is also implemented through
the LDLM lock system, but not all LDLM locks are flocks. The ones that
are flocks are gathered in a hash 'exp_flock_hash'. This supports
deadlock detection.

For those requests that initiate file system modifying transactions
the request and its attendant locks need to be preserved until either
a) the client acknowleges recieving the reply, or b) the transaction
has been committed locally. This ensures a request can be replayed in
the event of a failure. The LDLM lock is being kept until one of these
event occurs to prevent any other modifications of the same object.
The reply is kept on the 'exp_outstanding_replies' list until the LNet
layer notifies the server that the reply has been acknowledged. A reply
is kept on the 'exp_uncommitted_replies' list until the transaction
(if any) has been committed.

The 'exp_last_committed' value keeps the transaction number of the
last committed transaction. Every reply to a client includes this
value as a means of early-as-possible notification of transactions that
have been committed.

The 'exp_last_request_time' is self explanatory.

During reply a request that is waiting for reply is maintained on the
list 'exp_req_replay_queue'.

The 'exp_lock' spin-lock is used for access control to the exports
flags, as well as the 'exp_outstanding_replies' list and the revers
import, if any.
////^^^^
//////////////////////////////////////////////////////////////////////

The 'exp_connect_data' refers to an 'obd_connect_data' structure for
the connection established between this target and the client this
export refers to.  The 'exp_connect_data' describes the mutually
supported features that were negotiated between the client and server
at connect time.  See also the corresponding entry in the import and
in the connect messages passed between the hosts.

//////////////////////////////////////////////////////////////////////
////vvvv
The 'exp_flags' field encodes three directives as follows:
[source,c]
----
enum obd_option {
        OBD_OPT_FORCE =         0x0001,
        OBD_OPT_FAILOVER =      0x0002,
        OBD_OPT_ABORT_RECOV =   0x0004,
};
----
fixme: Are the set for some exports and a condition of their
existence? or do they reflect a transient state the export is passing
through?

The 'exp_failed' flag gets set whenever the target has failed for any
reason or the export is otherwise due to be cleaned up. Once set it
will not be unset in this export. Any subsequent connection between
the client and the target would be governed by a new export.

After a failure export data is retrieved from disk and the exports
recreated. Exports created in this way will have their
'exp_in_recovery' flag set. Once any outstanding requests and locks
have been recovered for the client, then the export is recovered and
'exp_in_recovery' can be cleared. When all the client exports for a
given target have been recovered then the target is considered
recovered, and when all targets have been recovered the server is
considered recovered.

A *_DISCONNECT message from the client will set the 'exp_disconnected'
flag, as will any sort of failure of the target. Once set the export
will be cleaned up and deleted.

When a *_CONNECT message arrives the 'exp_connecting' flag is set. If
for some reason a second *_CONNECT request arrives from the client it can
be discarded when this flag is set.

The 'exp_delayed' flag is no longer used. In older code it indicated
that recovery had not completed in a timely fashion, but that a tardy
recovery would still be possible, since there were no dependencies on
the export.

The 'exp_vbr_failed' flag indicates a failure during the recovery
process. See <<recovery>> for a more detailed discussion of recovery
and transaction replay. For a file system modifying request, the
server composes its reply including the 'pb_pre_versions' entries in
'ptlrpc_body', which indicate the most recent updates to the
object. The client updates the request with the 'pb_transno' and
'pb_pre_versions' from the reply, and keeps that request until the
target signals that the transaction has been committed to disk. If the
client times-out without that confirmation then it will 'replay' the
request, which now includes the 'pb_pre_versions' information. During
a replay the target checks that the object has the same version as
'pb_pre_versions' in replay. If this check fails then the object can't
be restored in the same state as it was in before failure. Usually that
happens if the recovery process fails for the connection between some
other client and this target, so part of change needed for this client
wasn't restored. At that point the 'exp_vbr_failed' flag is set
to indicate version based recovery failed. This will lead to the client
being evicted and this export being cleaned up and deleted.

At the start of recovery both the 'exp_req_replay_needed' and
'exp_lock_replay_needed' flags are set. As request replay is completed
the 'exp_req_replay_needed' flag is cleared. As lock replay is
completed the 'exp_lock_replay_needed' flag is cleared. Once both are
cleared the 'exp_in_recovery' flag can be cleared.

The 'exp_need_sync' supports an optimization. At mount time it is
likely that every client (potentially thousands) will create an export
and that export will need to be saved to disk synchronously. This can
lead to an unusually high and poorly performing interaction with the
disk. When the export is created the 'exp_need_sync' flag is set and
the actual writing to disk is delayed. As transactions arrive from
clients (in a much less coordinated fashion) the 'exp_need_sync' flag
indicates a need to have the export data on disk before proceeding
with a new transaction, so as it is next updated the transaction is
done synchronously to commit all changes on disk. At that point the
flag is cleared (except see below).

In DNE (phase I) the export for an MDT managing the connection from
another MDT will want to always keep the 'exp_need_sync' flag set. For
that special case such an export sets the 'exp_keep_sync', which then
prevents the 'exp_need_sync' flag from ever being cleared. This will
no longer be needed in DNE Phase II.

The 'exp_flvr_changed' and 'exp_flvr_adapt' flags along with
'exp_sp_peer', 'exp_flvr', 'exp_flvr_old', and 'exp_flvr_expire'
fields are all used to manage the security settings for the
connection. Security is discussed in the <<security>> section. (fixme:
or will be.)

The 'exp_libclient' flag indicates that the export is for a client
based on "liblustre". This allows for simplified handling on the
server. (fixme: how is processing simplified? It sounds like I may
need a whole special section on liblustre.)

The 'exp_need_mne_swab' flag indicates the presence of an old bug that
affected one special case of failed swabbing. It is not part of
current processing.

As RPCs arrive they are first subjected to triage. Each request is
placed on the 'exp_hp_rpcs' list and examined to see if it is high
priority (PING, truncate, bulk I/O). If it is not high priority then
it is moved to the 'exp_reg_prcs' list. The 'exp_rpc_lock' protects
both lists from concurrent access.

All arriving LDLM requests get put on the 'exp_bl_list' and access to
that list is controlled via the 'exp_bl_list_lock'.

The union provides for target specific data. The 'eu_target_data' is
for a common core of fields for a generic target. The others are
specific to particular target types: 'eu_mdt_data' for MDTs,
'eu_filter_data' for OSTs, 'eu_ec_data' for an "echo client" (fixme:
describe what an echo client is somewhere), and 'eu_mgs_data' is for
an MGS.

The 'exp_bl_lock_at' field supports adaptive timeouts which will be
discussed separately. (fixme: so discuss it somewhere.)
////^^^^
//////////////////////////////////////////////////////////////////////