-%% TeX macros to handle texinfo files
-
-% Copyright (C) 1985, 1986, 1988 Richard M. Stallman
-
-% NO WARRANTY
-
-% BECAUSE THIS PROGRAM IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
-%NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW. EXCEPT
-%WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC,
-%RICHARD M. STALLMAN AND/OR OTHER PARTIES PROVIDE THIS PROGRAM "AS IS"
-%WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
-%BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-%FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
-%AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
-%DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR
-%CORRECTION.
-
-% IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
-%STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., AND/OR ANY OTHER PARTY
-%WHO MAY MODIFY AND REDISTRIBUTE THIS PROGRAM AS PERMITTED BELOW, BE
-%LIABLE TO YOU FOR DAMAGES, INCLUDING ANY LOST PROFITS, LOST MONIES, OR
-%OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-%USE OR INABILITY TO USE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR
-%DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR
-%A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) THIS
-%PROGRAM, EVEN IF YOU HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
-%DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY.
-
-% GENERAL PUBLIC LICENSE TO COPY
-
-% 1. You may copy and distribute verbatim copies of this source file
-%as you receive it, in any medium, provided that you conspicuously
-%and appropriately publish on each copy a valid copyright notice
-%"Copyright (C) 1986 Richard M. Stallman"; and include
-%following the copyright notice a verbatim copy of the above disclaimer
-%of warranty and of this License.
-
-% 2. You may modify your copy or copies of this source file or
-%any portion of it, and copy and distribute such modifications under
-%the terms of Paragraph 1 above, provided that you also do the following:
-
-% a) cause the modified files to carry prominent notices stating
-% that you changed the files and the date of any change; and
-
-% b) cause the whole of any work that you distribute or publish,
-% that in whole or in part contains or is a derivative of this
-% program or any part thereof, to be licensed at no charge to all
-% third parties on terms identical to those contained in this
-% License Agreement (except that you may choose to grant more extensive
-% warranty protection to some or all third parties, at your option).
-
-% c) You may charge a distribution fee for the physical act of
-% transferring a copy, and you may at your option offer warranty
-% protection in exchange for a fee.
-
-%Mere aggregation of another unrelated program with this program (or its
-%derivative) on a volume of a storage or distribution medium does not bring
-%the other program under the scope of these terms.
-
-% 3. You may copy and distribute this program (or a portion or derivative
-%of it, under Paragraph 2) in object code or executable form under the terms
-%of Paragraphs 1 and 2 above provided that you also do one of the following:
-
-% a) accompany it with the complete corresponding machine-readable
-% source code, which must be distributed under the terms of
-% Paragraphs 1 and 2 above; or,
-
-% b) accompany it with a written offer, valid for at least three
-% years, to give any third party free (except for a nominal
-% shipping charge) a complete machine-readable copy of the
-% corresponding source code, to be distributed under the terms of
-% Paragraphs 1 and 2 above; or,
-
-% c) accompany it with the information you received as to where the
-% corresponding source code may be obtained. (This alternative is
-% allowed only for noncommercial distribution and only if you
-% received the program in object code or executable form alone.)
-
-%For an executable file, complete source code means all the source code for
-%all modules it contains; but, as a special exception, it need not include
-%source code for modules which are standard libraries that accompany the
-%operating system on which the executable file runs.
-
-% 4. You may not copy, sublicense, distribute or transfer this program
-%except as expressly provided under this License Agreement. Any attempt
-%otherwise to copy, sublicense, distribute or transfer this program is void and
-%your rights to use the program under this License agreement shall be
-%automatically terminated. However, parties who have received computer
-%software programs from you with this License Agreement will not have
-%their licenses terminated so long as such parties remain in full compliance.
-
-% 5. If you wish to incorporate parts of this program into other free
-%programs whose distribution conditions are different, write to the Free
-%Software Foundation at 675 Mass Ave, Cambridge, MA 02139. We have not yet
-%worked out a simple rule that can be stated here, but we will often permit
-%this. We will be guided by the two goals of preserving the free status of
-%all derivatives of our free software and of promoting the sharing and reuse of
-%software.
-
-%In other words, you are welcome to use, share and improve this program.
-%You are forbidden to forbid anyone else to use, share and improve
-%what you give them. Help stamp out software-hoarding!
-
-\def\texinfoversion{1.18}
-\message{Loading texinfo package [Version \texinfoversion]:}
-\message{}
-
-% Save some parts of plain tex whose names we will redefine.
+% texinfo.tex -- TeX macros to handle Texinfo files.
+%
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2006-02-13.16}
+%
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
+% Software Foundation, Inc.
+%
+% This texinfo.tex file is free software; you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this texinfo.tex file; see the file COPYING. If not, write
+% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+% Boston, MA 02110-1301, USA.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. (This has been our intent since Texinfo was invented.)
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+% ftp://tug.org/tex/texinfo.tex
+% (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org. Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem. Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution. For a simple
+% manual foo.texi, however, you can get away with this:
+% tex foo.texi
+% texindex foo.??
+% tex foo.texi
+% tex foo.texi
+% dvips foo.dvi -o # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent. You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexdot=\.
-\let\ptexstar=\*
-\let\ptexend=\end
-\let\ptexbullet=\bullet
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+ \catcode`+=\active \catcode`\_=\active}
+
+\message{Basics,}
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
\let\ptexb=\b
+\let\ptexbullet=\bullet
\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
\let\ptext=\t
-\let\ptexl=\l
-\let\ptexL=\L
-\def\tie{\penalty 10000\ } % Save plain tex definition of ~.
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
-\message{Basics,}
-\chardef\other=12
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+ \let\linenumber = \empty % Pre-3.0.
+\else
+ \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
-\hyphenation{ap-pen-dix}
-\hyphenation{mini-buf-fer mini-buf-fers}
-\hyphenation{eshell}
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+ Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+ ap-pen-dix bit-map bit-maps
+ data-base data-bases eshell fall-ing half-way long-est man-u-script
+ man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+ par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+ spell-ing spell-ings
+ stand-alone strong-est time-stamp time-stamps which-ever white-space
+ wide-spread wrap-around
+}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset \bindingoffset=0pt
-\newdimen \normaloffset \normaloffset=\hoffset
+\newdimen\bindingoffset
+\newdimen\normaloffset
\newdimen\pagewidth \newdimen\pageheight
-\pagewidth=\hsize \pageheight=\vsize
-%---------------------Begin change-----------------------
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt}
+
+% @| inserts a changebar to the left of the current line. It should
+% surround any changed text. This approach does *not* work if the
+% change spans more than two lines of output. To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).
+%
+\def\|{%
+ % \vadjust can only be used in horizontal mode.
+ \leavevmode
+ %
+ % Append this vertical mode material after the current line in the output.
+ \vadjust{%
+ % We want to insert a rule with the height and depth of the current
+ % leading; that is exactly what \strutbox is supposed to record.
+ \vskip-\baselineskip
+ %
+ % \vadjust-items are inserted at the left edge of the type. So
+ % the \llap here moves out into the left-hand margin.
+ \llap{%
+ %
+ % For a thicker or thinner bar, change the `1pt'.
+ \vrule height\baselineskip width1pt
+ %
+ % This is the space between the bar and the text.
+ \hskip 12pt
+ }%
+ }%
+}
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal. We don't just call \tracingall here,
+% since that produces some useless output on the terminal. We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+ \tracingstats2
+ \tracingpages1
+ \tracinglostchars2 % 2 gives us more in etex
+ \tracingparagraphs1
+ \tracingoutput1
+ \tracingmacros2
+ \tracingrestores1
+ \showboxbreadth\maxdimen \showboxdepth\maxdimen
+ \ifx\eTeXversion\undefined\else % etex gives us more logging
+ \tracingscantokens1
+ \tracingifs1
+ \tracinggroups1
+ \tracingnesting2
+ \tracingassigns1
+ \fi
+ \tracingcommands3 % 3 gives us more in etex
+ \errorcontextlines16
+}%
+
+% add check for \lastpenalty to plain's definitions. If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+ \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+ \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+ \removelastskip\penalty-200\bigskip\fi\fi}
+
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
%
-% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
%
-\newdimen\cornerlong \newdimen\cornerthick
-\newdimen \topandbottommargin
-\newdimen \outerhsize \newdimen \outervsize
-\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
-\outerhsize=7in
-\outervsize=9.5in
-\topandbottommargin=.75in
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
%
-%---------------------End change-----------------------
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions itself, but you have to call it yourself.
-\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
-\def\onepageout#1{\hoffset=\normaloffset
-\ifodd\pageno \advance\hoffset by \bindingoffset
-\else \advance\hoffset by -\bindingoffset\fi
-\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
- {\let\hsize=\pagewidth \makefootline}}
-\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-
-
-% Here is a modification of the main output routine for Near East Publications
-% This provides right-angle cropmarks at all four corners.
-% The contents of the page are centerlined into the cropmarks,
-% and any desired binding offset is added as an \hskip on either
-% site of the centerlined box. (P. A. MacKay, 12 November, 1986)
-%
-\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
- \shipout
- \vbox to \outervsize{\hsize=\outerhsize
- \vbox{\line{\ewtop\hfill\ewtop}}
- \nointerlineskip
- \line{\vbox{\moveleft\cornerthick\nstop}
- \hfill
- \vbox{\moveright\cornerthick\nstop}}
- \vskip \topandbottommargin
- \centerline{\ifodd\pageno\hskip\bindingoffset\fi
- \vbox{
- {\let\hsize=\pagewidth \makeheadline}
- \pagebody{#1}
- {\let\hsize=\pagewidth \makefootline}}
- \ifodd\pageno\else\hskip\bindingoffset\fi}
- \vskip \topandbottommargin plus1fill minus1fill
- \boxmaxdepth\cornerthick
- \line{\vbox{\moveleft\cornerthick\nsbot}
- \hfill
- \vbox{\moveright\cornerthick\nsbot}}
- \nointerlineskip
- \vbox{\line{\ewbot\hfill\ewbot}}
- }
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-%
-% Do @cropmarks to get crop marks
-\def\cropmarks{\let\onepageout=\croppageout }
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+ \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+ %
+ \ifodd\pageno \advance\hoffset by \bindingoffset
+ \else \advance\hoffset by -\bindingoffset\fi
+ %
+ % Do this outside of the \shipout so @code etc. will be expanded in
+ % the headline as they should be, not taken literally (outputting ''code).
+ \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+ %
+ {%
+ % Have to do this stuff outside the \shipout because we want it to
+ % take effect in \write's, yet the group defined by the \vbox ends
+ % before the \shipout runs.
+ %
+ \indexdummies % don't expand commands in the output.
+ \normalturnoffactive % \ in index entries must not stay \, e.g., if
+ % the page break happens to be in the middle of an example.
+ % We don't want .vr (or whatever) entries like this:
+ % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+ % "\acronym" won't work when it's read back in;
+ % it needs to be
+ % {\code {{\tt \backslashcurfont }acronym}
+ \shipout\vbox{%
+ % Do this early so pdf references go to the beginning of the page.
+ \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+ %
+ \ifcropmarks \vbox to \outervsize\bgroup
+ \hsize = \outerhsize
+ \vskip-\topandbottommargin
+ \vtop to0pt{%
+ \line{\ewtop\hfil\ewtop}%
+ \nointerlineskip
+ \line{%
+ \vbox{\moveleft\cornerthick\nstop}%
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}%
+ }%
+ \vss}%
+ \vskip\topandbottommargin
+ \line\bgroup
+ \hfil % center the page within the outer (page) hsize.
+ \ifodd\pageno\hskip\bindingoffset\fi
+ \vbox\bgroup
+ \fi
+ %
+ \unvbox\headlinebox
+ \pagebody{#1}%
+ \ifdim\ht\footlinebox > 0pt
+ % Only leave this space if the footline is nonempty.
+ % (We lessened \vsize for it in \oddfootingxxx.)
+ % The \baselineskip=24pt in plain's \makefootline has no effect.
+ \vskip 2\baselineskip
+ \unvbox\footlinebox
+ \fi
+ %
+ \ifcropmarks
+ \egroup % end of \vbox\bgroup
+ \hfil\egroup % end of (centering) \line\bgroup
+ \vskip\topandbottommargin plus1fill minus1fill
+ \boxmaxdepth = \cornerthick
+ \vbox to0pt{\vss
+ \line{%
+ \vbox{\moveleft\cornerthick\nsbot}%
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}%
+ }%
+ \nointerlineskip
+ \line{\ewbot\hfil\ewbot}%
+ }%
+ \egroup % \vbox from first cropmarks clause
+ \fi
+ }% end of \shipout\vbox
+ }% end of group with \indexdummies
+ \advancepageno
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
{\catcode`\@ =11
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+ \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
\dimen@=\dp#1 \unvbox#1
\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
}
-%
% Here are the rules for the cropmarks. Note that they are
% offset so that the space between them is truly \outerhsize or \outervsize
% (P. A. MacKay, 12 November, 1986)
\def\nsbot{\vbox
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-% Parse an argument, then pass it to #1.
-% The argument can be delimited with [...] or with "..." or braces
-% or it can be a whole line.
-% #1 should be a macro which expects
-% an ordinary undelimited TeX argument.
-
-\def\parsearg #1{\let\next=#1\begingroup\obeylines\futurelet\temp\parseargx}
+% Parse an argument, then pass it to #1. The argument is the rest of
+% the input line (except we remove a trailing comment). #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+ \def\next{#2}%
+ \begingroup
+ \obeylines
+ \spaceisspace
+ #1%
+ \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
-\def\parseargx{%
-\ifx \obeyedspace\temp \aftergroup\parseargdiscardspace \else%
-\aftergroup \parseargline %
-\fi \endgroup}
+{\obeylines %
+ \gdef\parseargline#1^^M{%
+ \endgroup % End of the group started in \parsearg.
+ \argremovecomment #1\comment\ArgTerm%
+ }%
+}
-{\obeyspaces %
-\gdef\parseargdiscardspace {\begingroup\obeylines\futurelet\temp\parseargx}}
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
-\gdef\obeyedspace{\ }
+% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+% @end itemize @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+ \def\temp{#3}%
+ \ifx\temp\empty
+ % We cannot use \next here, as it holds the macro to run;
+ % thus we reuse \temp.
+ \let\temp\finishparsearg
+ \else
+ \let\temp\argcheckspaces
+ \fi
+ % Put the space token in:
+ \temp#1 #3\ArgTerm
+}
-\def\parseargline{\begingroup \obeylines \parsearglinex}
-{\obeylines %
-\gdef\parsearglinex #1^^M{\endgroup \next {#1}}}
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \next.
+% (Similarily, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}}
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+% \parseargdef\foo{...}
+% is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick. --kasal, 16nov03
-%% These are used to keep @begin/@end levels from running away
-%% Call \inENV within environments (after a \begingroup)
-\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
-\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment. Type Return to continue.}
-\endgroup\fi} % This is not perfect, but it should reduce lossage
+\def\parseargdef#1{%
+ \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+ \def#2{\parsearg#1}%
+ \def#1##1%
+}
-% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Type <Return> to continue}
+% Several utility definitions with active space:
+{
+ \obeyspaces
+ \gdef\obeyedspace{ }
+
+ % Make each space character in the input produce a normal interword
+ % space in the output. Don't allow a line break at this space, as this
+ % is used only in environments like @example, where each line of input
+ % should produce a line of output anyway.
+ %
+ \gdef\sepspaces{\obeyspaces\let =\tie}
+
+ % If an index command is used in an @example environment, any spaces
+ % therein should become regular spaces in the raw index file, not the
+ % expansion of \tie (\leavevmode \penalty \@M \ ).
+ \gdef\unsepspaces{\let =\space}
+}
-\outer\def\begin{\parsearg\beginxxx}
-\def\beginxxx #1{%
-\expandafter\ifx\csname #1\endcsname\relax
-{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
-\csname #1\endcsname\fi}
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-%% @end foo executes the definition of \Efoo.
-%% foo can be delimited by doublequotes or brackets.
+% Define the framework for environments in texinfo.tex. It's used like this:
+%
+% \envdef\foo{...}
+% \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo. \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches. The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as enviroments; they don't open a group. (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At runtime, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+ \def\temp{#1}%
+ \ifx\thisenv\temp
+ \else
+ \badenverr
+ \fi
+}
-\def\end{\parsearg\endxxx}
+% Evironment mismatch, #1 expected:
+\def\badenverr{%
+ \errhelp = \EMsimple
+ \errmessage{This command can appear only \inenvironment\temp,
+ not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+ \ifx#1\empty
+ out of any environment%
+ \else
+ in environment \expandafter\string#1%
+ \fi
+}
-\def\endxxx #1{%
-\expandafter\ifx\csname E#1\endcsname\relax
-\expandafter\ifx\csname #1\endcsname\relax
-\errmessage{Undefined command @end #1}\else
-\errorE{#1}\fi\fi
-\csname E#1\endcsname}
-\def\errorE#1{
-{\errhelp=\EMsimple \errmessage{@end #1 not within #1 environment}}}
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+ \if 1\csname iscond.#1\endcsname
+ \else
+ % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03
+ \expandafter\checkenv\csname#1\endcsname
+ \csname E#1\endcsname
+ \endgroup
+ \fi
+}
-% Single-spacing is done by various environments.
+\newhelp\EMsimple{Press RETURN to continue.}
-\newskip\singlespaceskip \singlespaceskip = \baselineskip
-\def\singlespace{%
-{\advance \baselineskip by -\singlespaceskip
-\kern \baselineskip}%
-\baselineskip=\singlespaceskip
-}
%% Simple single-character @ commands
% @@ prints an @
% Kludge this until the fonts are right (grr).
-\def\@{{\sf \char '100}}
+\def\@{{\tt\char64}}
-% Define @` and @' to be the same as ` and '
-% but suppressing ligatures.
-\def\`{{`}}
-\def\'{{'}}
+% This is turned off because it was never documented
+% and you can use @w{...} around a quote to suppress ligatures.
+%% Define @` and @' to be the same as ` and '
+%% but suppressing ligatures.
+%\def\`{{`}}
+%\def\'{{'}}
% Used to generate quoted braces.
-
-\def\mylbrace {{\tt \char '173}}
-\def\myrbrace {{\tt \char '175}}
+\def\mylbrace {{\tt\char123}}
+\def\myrbrace {{\tt\char125}}
\let\{=\mylbrace
\let\}=\myrbrace
+\begingroup
+ % Definitions to produce \{ and \} commands for indices,
+ % and @{ and @} for the aux/toc files.
+ \catcode`\{ = \other \catcode`\} = \other
+ \catcode`\[ = 1 \catcode`\] = 2
+ \catcode`\! = 0 \catcode`\\ = \other
+ !gdef!lbracecmd[\{]%
+ !gdef!rbracecmd[\}]%
+ !gdef!lbraceatcmd[@{]%
+ !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+ \def\temp{#1}%
+ \ifx\temp\imacro \ptexi
+ \else\ifx\temp\jmacro \j
+ \else \errmessage{@dotless can be used only with i or j}%
+ \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence. (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo. Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+ L\kern-.36em
+ {\setbox0=\hbox{T}%
+ \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}%
+ \kern-.15em
+ \TeX
+}
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
% @: forces normal size whitespace following.
\def\:{\spacefactor=1000 }
% @* forces a line break.
-\def\*{\hfil\break}
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
+\def\*{\hfil\break\hbox{}\ignorespaces}
-% @w prevents a word break
-\def\w #1{\hbox{#1}}
+% @/ allows a line break.
+\let\/=\allowbreak
-% @group ... @end group forces ... to be all on one page.
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
-\def\group{\begingroup% \inENV ???
-\def \Egroup{\egroup\endgroup}
-\vbox\bgroup}
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
-% @br forces paragraph break
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
-\let\br = \par
+% @frenchspacing on|off says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+ \def\temp{#1}%
+ \ifx\temp\onword \plainfrenchspacing
+ \else\ifx\temp\offword \plainnonfrenchspacing
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @frenchspacing option `\temp', must be on/off}%
+ \fi\fi
+}
-% @dots{} output some dots
+% @w prevents a word break. Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line. According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0). If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large. This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material. In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom. The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+ \ifnum\catcode`\^^M=\active \else
+ \errhelp = \groupinvalidhelp
+ \errmessage{@group invalid in context where filling is enabled}%
+ \fi
+ \startsavinginserts
+ %
+ \setbox\groupbox = \vtop\bgroup
+ % Do @comment since we are called inside an environment such as
+ % @example, where each end-of-line in the input causes an
+ % end-of-line in the output. We don't want the end-of-line after
+ % the `@group' to put extra space in the output. Since @group
+ % should appear on a line by itself (according to the Texinfo
+ % manual), we don't worry about eating any user text.
+ \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it. Thus, space below is not quite equal to space
+% above. But it's pretty close.
+\def\Egroup{%
+ % To get correct interline space between the last line of the group
+ % and the first line afterwards, we have to propagate \prevdepth.
+ \endgraf % Not \par, as it may have been set to \lisppar.
+ \global\dimen1 = \prevdepth
+ \egroup % End the \vtop.
+ % \dimen0 is the vertical size of the group's box.
+ \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
+ % \dimen2 is how much space is left on the page (more or less).
+ \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
+ % if the group doesn't fit on the current page, and it's a big big
+ % group, force a page break.
+ \ifdim \dimen0 > \dimen2
+ \ifdim \pagetotal < \vfilllimit\pageheight
+ \page
+ \fi
+ \fi
+ \box\groupbox
+ \prevdepth = \dimen1
+ \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil \mil=0.001in
+
+% Old definition--didn't work.
+%\parseargdef\need{\par %
+%% This method tries to make TeX break the page naturally
+%% if the depth of the box does not fit.
+%{\baselineskip=0pt%
+%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
+%\prevdepth=-1000pt
+%}}
+
+\parseargdef\need{%
+ % Ensure vertical mode, so we don't make a big box in the middle of a
+ % paragraph.
+ \par
+ %
+ % If the @need value is less than one line space, it's useless.
+ \dimen0 = #1\mil
+ \dimen2 = \ht\strutbox
+ \advance\dimen2 by \dp\strutbox
+ \ifdim\dimen0 > \dimen2
+ %
+ % Do a \strut just to make the height of this box be normal, so the
+ % normal leading is inserted relative to the preceding line.
+ % And a page break here is fine.
+ \vtop to #1\mil{\strut\vfil}%
+ %
+ % TeX does not even consider page breaks if a penalty added to the
+ % main vertical list is 10000 or more. But in order to see if the
+ % empty box we just added fits on the page, we must make it consider
+ % page breaks. On the other hand, we don't want to actually break the
+ % page after the empty box. So we use a penalty of 9999.
+ %
+ % There is an extremely small chance that TeX will actually break the
+ % page at this \penalty, if there are no other feasible breakpoints in
+ % sight. (If the user is using lots of big @group commands, which
+ % almost-but-not-quite fill up a page, TeX will have a hard time doing
+ % good page breaking, for example.) However, I could not construct an
+ % example where a page broke at this \penalty; if it happens in a real
+ % document, then we can reconsider our strategy.
+ \penalty9999
+ %
+ % Back up by the size of the box, whether we did a page break or not.
+ \kern -#1\mil
+ %
+ % Do not allow a page break right after this kern.
+ \nobreak
+ \fi
+}
-\def\dots{$\ldots$}
+% @br forces paragraph break (and is undocumented).
-% @page forces the start of a new page
+\let\br = \par
+% @page forces the start of a new page.
+%
\def\page{\par\vfill\supereject}
% @exdent text....
% outputs text on separate line in roman font, starting at standard page margin
-\def\exdent{\errmessage{@exdent in filled text}}
- % @lisp, etc, define \exdent locally from \internalexdent
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
-{\obeyspaces
-\gdef\internalexdent{\parsearg\exdentzzz}}
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
-\def\exdentzzz #1{{\advance \leftskip by -\lispnarrowing
-\advance \hsize by -\leftskip
-\advance \hsize by -\rightskip
-\leftline{{\rm#1}}}}
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+ \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph. For more general purposes, use the \margin insertion
+% class. WHICH is `l' or `r'.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+ \nobreak
+ \kern-\strutdepth
+ \vtop to \strutdepth{%
+ \baselineskip=\strutdepth
+ \vss
+ % if you have multiple lines of stuff to put here, you'll need to
+ % make the vbox yourself of the appropriate size.
+ \ifx#1l%
+ \llap{\ignorespaces #2\hskip\inmarginspacing}%
+ \else
+ \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+ \fi
+ \null
+ }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \def\lefttext{#1}% have both texts
+ \def\righttext{#2}%
+ \else
+ \def\lefttext{#1}% have only one text
+ \def\righttext{#1}%
+ \fi
+ %
+ \ifodd\pageno
+ \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+ \else
+ \def\temp{\inleftmargin\lefttext}%
+ \fi
+ \temp
+}
% @include file insert text of that file as input.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+ \pushthisfilestack
+ \def\thisfile{#1}%
+ {%
+ \makevalueexpandable
+ \def\temp{\input #1 }%
+ \expandafter
+ }\temp
+ \popthisfilestack
+}
+\def\filenamecatcodes{%
+ \catcode`\\=\other
+ \catcode`~=\other
+ \catcode`^=\other
+ \catcode`_=\other
+ \catcode`|=\other
+ \catcode`<=\other
+ \catcode`>=\other
+ \catcode`+=\other
+ \catcode`-=\other
+}
-\def\include{\parsearg\includezzz}
-\def\includezzz #1{{\def\thisfile{#1}\input #1
-}}
+\def\pushthisfilestack{%
+ \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+ \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+ \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
-\def\thisfile{}
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+ the stack of filenames is empty.}}
-% @center line outputs that line, centered
+\def\thisfile{}
-\def\center{\parsearg\centerzzz}
-\def\centerzzz #1{{\advance\hsize by -\leftskip
-\advance\hsize by -\rightskip
-\centerline{#1}}}
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+ \ifhmode
+ \let\next\centerH
+ \else
+ \let\next\centerV
+ \fi
+ \next{\hfil \ignorespaces#1\unskip \hfil}%
+}
+\def\centerH#1{%
+ {%
+ \hfil\break
+ \advance\hsize by -\leftskip
+ \advance\hsize by -\rightskip
+ \line{#1}%
+ \break
+ }%
+}
+\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
% @sp n outputs n lines of vertical space
-\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\parseargdef\sp{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
% @ignore ... @end ignore is another way to write a comment
-\def\comment{\parsearg \commentxxx}
-
-\def\commentxxx #1{}
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
\let\c=\comment
-\long\def\ignore #1\end ignore{}
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \defaultparindent = 0pt
+ \else
+ \defaultparindent = #1em
+ \fi
+ \fi
+ \parindent = \defaultparindent
+}
-\outer\def\ifset{\parsearg\ifsetxxx}
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \lispnarrowing = 0pt
+ \else
+ \lispnarrowing = #1em
+ \fi
+ \fi
+}
-\def\ifsetxxx #1#2\end ifset{%
-\expandafter\ifx\csname IF#1\endcsname\relax \else #2\fi}
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading. If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+ \def\temp{#1}%
+ \ifx\temp\noneword
+ \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+ \else\ifx\temp\insertword
+ \let\suppressfirstparagraphindent = \relax
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @firstparagraphindent option `\temp'}%
+ \fi\fi
+}
-\outer\def\ifclear{\parsearg\ifclearxxx}
+% Here is how we actually suppress indentation. Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+ \gdef\indent{%
+ \restorefirstparagraphindent
+ \indent
+ }%
+ \gdef\noindent{%
+ \restorefirstparagraphindent
+ \noindent
+ }%
+ \global\everypar = {%
+ \kern -\parindent
+ \restorefirstparagraphindent
+ }%
+}
-\def\ifclearxxx #1#2\end ifclear{%
-\expandafter\ifx\csname IF#1\endcsname\relax #2\fi}
+\gdef\restorefirstparagraphindent{%
+ \global \let \indent = \ptexindent
+ \global \let \noindent = \ptexnoindent
+ \global \everypar = {}%
+}
-% Some texinfo constructs that are trivial in tex
-\def\iftex{}
-\def\Eiftex{}
-\long\def\ifinfo #1\end ifinfo{}
-\long\def\menu #1\end menu{}
+% @asis just yields its argument. Used with @table, for example.
+%
\def\asis#1{#1}
-\def\node{\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\lastnode=\relax
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}. So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+ \catcode`\_ = \active
+ \gdef\mathunderscore{%
+ \catcode`\_=\active
+ \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+ }
+}
+% Another complication: we want \\ (and @\) to output a \ character.
+% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
+% this is not advertised and we don't care. Texinfo does not
+% otherwise define @\.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+ \tex
+ \mathunderscore
+ \let\\ = \mathbackslash
+ \mathactive
+ $\finishmath
+}
+\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex.
-\def\donoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\setref{\lastnode}\fi
-\let\lastnode=\relax}
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+ \catcode`^ = \active
+ \catcode`< = \active
+ \catcode`> = \active
+ \catcode`+ = \active
+ \gdef\mathactive{%
+ \let^ = \ptexhat
+ \let< = \ptexless
+ \let> = \ptexgtr
+ \let+ = \ptexplus
+ }
+}
+
+% @bullet and @minus need the same treatment as @math, just above.
+\def\bullet{$\ptexbullet$}
+\def\minus{$-$}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+ \leavevmode
+ \hbox to 1.5em{%
+ \hskip 0pt plus 0.25fil
+ .\hfil.\hfil.%
+ \hskip 0pt plus 0.5fil
+ }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+ \dots
+ \spacefactor=\endofsentencespacefactor
+}
-\def\unnumbnoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
-\let\lastnode=\relax}
+% @comma{} is so commas can be inserted into text without messing up
+% Texinfo's parsing.
+%
+\let\comma = ,
+% @refill is a no-op.
\let\refill=\relax
-\let\setfilename=\comment
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+ \fixbackslash % Turn off hack to swallow `\input texinfo'.
+ \iflinks
+ \tryauxfile
+ % Open the new aux file. TeX will close it automatically at exit.
+ \immediate\openout\auxfile=\jobname.aux
+ \fi % \openindices needs to do some work in any case.
+ \openindices
+ \let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ \openin 1 texinfo.cnf
+ \ifeof 1 \else \input texinfo.cnf \fi
+ \closein 1
+ %
+ \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set). So we test for \relax and 0 as well as \undefined,
+% borrowed from ifpdf.sty.
+\ifx\pdfoutput\undefined
+\else
+ \ifx\pdfoutput\relax
+ \else
+ \ifcase\pdfoutput
+ \else
+ \pdftrue
+ \fi
+ \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places. Thus, we have to
+% double any backslashes. Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e. Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's what we do).
+
+% double active backslashes.
+%
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslashdouble{%
+ @catcode`@\=@active
+ @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters. hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens. I've
+% tinkered with it a little for texinfo, but it's definitely from there.
+%
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+%
+\def\HyPsdSubst#1#2#3{%
+ \def\HyPsdReplace##1#1##2\END{%
+ ##1%
+ \ifx\\##2\\%
+ \else
+ #2%
+ \HyReturnAfterFi{%
+ \HyPsdReplace##2\END
+ }%
+ \fi
+ }%
+ \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+ \xdef#1{#1}% redefine it as its expansion; the definition is simply
+ % \lastnode when called from \setref -> \pdfmkdest.
+ \HyPsdSubst{(}{\realbackslash(}{#1}%
+ \HyPsdSubst{)}{\realbackslash)}{#1}%
+}
+
+\ifpdf
+ \input pdfcolor
+ \pdfcatalog{/PageMode /UseOutlines}%
+ \def\dopdfimage#1#2#3{%
+ \def\imagewidth{#2}%
+ \def\imageheight{#3}%
+ % without \immediate, pdftex seg faults when the same image is
+ % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
+ \ifnum\pdftexversion < 14
+ \immediate\pdfimage
+ \else
+ \immediate\pdfximage
+ \fi
+ \ifx\empty\imagewidth\else width \imagewidth \fi
+ \ifx\empty\imageheight\else height \imageheight \fi
+ \ifnum\pdftexversion<13
+ #1.pdf%
+ \else
+ {#1.pdf}%
+ \fi
+ \ifnum\pdftexversion < 14 \else
+ \pdfrefximage \pdflastximage
+ \fi}
+ \def\pdfmkdest#1{{%
+ % We have to set dummies so commands such as @code, and characters
+ % such as \, aren't expanded when present in a section title.
+ \atdummies
+ \activebackslashdouble
+ \def\pdfdestname{#1}%
+ \backslashparens\pdfdestname
+ \pdfdest name{\pdfdestname} xyz%
+ }}%
+ %
+ % used to mark target names; must be expandable.
+ \def\pdfmkpgn#1{#1}%
+ %
+ \let\linkcolor = \Blue % was Cyan, but that seems light?
+ \def\endlink{\Black\pdfendlink}
+ % Adding outlines to PDF; macros for calculating structure of outlines
+ % come from Petr Olsak
+ \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+ \else \csname#1\endcsname \fi}
+ \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+ \advance\tempnum by 1
+ \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+ %
+ % #1 is the section text, which is what will be displayed in the
+ % outline by the pdf viewer. #2 is the pdf expression for the number
+ % of subentries (or empty, for subsubsections). #3 is the node text,
+ % which might be empty if this toc entry had no corresponding node.
+ % #4 is the page number
+ %
+ \def\dopdfoutline#1#2#3#4{%
+ % Generate a link to the node text if that exists; else, use the
+ % page number. We could generate a destination for the section
+ % text in the case where a section has no node, but it doesn't
+ % seem worth the trouble, since most documents are normally structured.
+ \def\pdfoutlinedest{#3}%
+ \ifx\pdfoutlinedest\empty
+ \def\pdfoutlinedest{#4}%
+ \else
+ % Doubled backslashes in the name.
+ {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+ \backslashparens\pdfoutlinedest}%
+ \fi
+ %
+ % Also double the backslashes in the display string.
+ {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+ \backslashparens\pdfoutlinetext}%
+ %
+ \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+ }
+ %
+ \def\pdfmakeoutlines{%
+ \begingroup
+ % Thanh's hack / proper braces in bookmarks
+ \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+ \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+ %
+ % Read toc silently, to get counts of subentries for \pdfoutline.
+ \def\numchapentry##1##2##3##4{%
+ \def\thischapnum{##2}%
+ \def\thissecnum{0}%
+ \def\thissubsecnum{0}%
+ }%
+ \def\numsecentry##1##2##3##4{%
+ \advancenumber{chap\thischapnum}%
+ \def\thissecnum{##2}%
+ \def\thissubsecnum{0}%
+ }%
+ \def\numsubsecentry##1##2##3##4{%
+ \advancenumber{sec\thissecnum}%
+ \def\thissubsecnum{##2}%
+ }%
+ \def\numsubsubsecentry##1##2##3##4{%
+ \advancenumber{subsec\thissubsecnum}%
+ }%
+ \def\thischapnum{0}%
+ \def\thissecnum{0}%
+ \def\thissubsecnum{0}%
+ %
+ % use \def rather than \let here because we redefine \chapentry et
+ % al. a second time, below.
+ \def\appentry{\numchapentry}%
+ \def\appsecentry{\numsecentry}%
+ \def\appsubsecentry{\numsubsecentry}%
+ \def\appsubsubsecentry{\numsubsubsecentry}%
+ \def\unnchapentry{\numchapentry}%
+ \def\unnsecentry{\numsecentry}%
+ \def\unnsubsecentry{\numsubsecentry}%
+ \def\unnsubsubsecentry{\numsubsubsecentry}%
+ \readdatafile{toc}%
+ %
+ % Read toc second time, this time actually producing the outlines.
+ % The `-' means take the \expnumber as the absolute number of
+ % subentries, which we calculated on our first read of the .toc above.
+ %
+ % We use the node names as the destinations.
+ \def\numchapentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+ \def\numsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+ \def\numsubsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+ \def\numsubsubsecentry##1##2##3##4{% count is always zero
+ \dopdfoutline{##1}{}{##3}{##4}}%
+ %
+ % PDF outlines are displayed using system fonts, instead of
+ % document fonts. Therefore we cannot use special characters,
+ % since the encoding is unknown. For example, the eogonek from
+ % Latin 2 (0xea) gets translated to a | character. Info from
+ % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+ %
+ % xx to do this right, we have to translate 8-bit characters to
+ % their "best" equivalent, based on the @documentencoding. Right
+ % now, I guess we'll just let the pdf reader have its way.
+ \indexnofonts
+ \setupdatafile
+ \catcode`\\=\active \otherbackslash
+ \input \jobname.toc
+ \endgroup
+ }
+ %
+ \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+ \ifx\PP\D\let\nextsp\relax
+ \else\let\nextsp\skipspaces
+ \ifx\p\space\else\addtokens{\filename}{\PP}%
+ \advance\filenamelength by 1
+ \fi
+ \fi
+ \nextsp}
+ \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+ \ifnum\pdftexversion < 14
+ \let \startlink \pdfannotlink
+ \else
+ \let \startlink \pdfstartlink
+ \fi
+ % make a live url in pdf output.
+ \def\pdfurl#1{%
+ \begingroup
+ % it seems we really need yet another set of dummies; have not
+ % tried to figure out what each command should do in the context
+ % of @url. for now, just make @/ a no-op, that's the only one
+ % people have actually reported a problem with.
+ %
+ \normalturnoffactive
+ \def\@{@}%
+ \let\/=\empty
+ \makevalueexpandable
+ \leavevmode\Red
+ \startlink attr{/Border [0 0 0]}%
+ user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+ \endgroup}
+ \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+ \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+ \def\maketoks{%
+ \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+ \ifx\first0\adn0
+ \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+ \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+ \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+ \else
+ \ifnum0=\countA\else\makelink\fi
+ \ifx\first.\let\next=\done\else
+ \let\next=\maketoks
+ \addtokens{\toksB}{\the\toksD}
+ \ifx\first,\addtokens{\toksB}{\space}\fi
+ \fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \next}
+ \def\makelink{\addtokens{\toksB}%
+ {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+ \def\pdflink#1{%
+ \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+ \linkcolor #1\endlink}
+ \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
+\fi % \ifx\pdfoutput
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{See Info file \file{\losespace#3{}}, node `\losespace#1{}'}
-\def\losespace #1{#1}
\message{fonts,}
-% Font-change commands.
-
-%% Try out Computer Modern fonts at \magstephalf
-\font\tenrm=cmr10 scaled \magstephalf
-\font\tentt=cmtt10 scaled \magstephalf
-% Instead of cmb10, you many want to use cmbx10.
-% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10.
-\font\tenbf=cmb10 scaled \magstephalf
-\font\tenit=cmti10 scaled \magstephalf
-\font\tensl=cmsl10 scaled \magstephalf
-\font\tensf=cmss10 scaled \magstephalf
-\def\li{\sf}
-\font\tensc=cmcsc10 scaled \magstephalf
-
-% Fonts for @defun, etc.
-\font\defbf=cmbx10 scaled \magstep1 %was 1314
-\let\deftt=\tentt
-\def\df{\let\tt=\deftt \defbf}
-
-% Font for title
-\font\titlerm = cmbx10 scaled \magstep5
-
-% Fonts for indices
-\font\indit=cmti9 \font\indrm=cmr9
-\def\indbf{\indrm} \def\indsl{\indit}
-\def\indexfonts{\let\it=\indit \let\sl=\indsl \let\bf=\indbf \let\rm=\indrm}
-
-% Fonts for headings
-\font\chaprm=cmbx10 scaled \magstep3
-\font\chapit=cmti10 scaled \magstep3
-\font\chapsl=cmsl10 scaled \magstep3
-\font\chaptt=cmtt10 scaled \magstep3
-\font\chapsf=cmss10 scaled \magstep3
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+ \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+ \csname ten#1\endcsname % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+% Default leading.
+\newdimen\textleading \textleading = 13.2pt
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly. There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+\def\setleading#1{%
+ \normalbaselineskip = #1\relax
+ \normallineskip = \lineskipfactor\normalbaselineskip
+ \normalbaselines
+ \setbox\strutbox =\hbox{%
+ \vrule width0pt height\strutheightpercent\baselineskip
+ depth \strutdepthpercent \baselineskip
+ }%
+}
+
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\undefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx} %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}
+\setfont\deftt\ttshape{10}{\magstep1}
+\setfont\defttsl\ttslshape{10}{\magstep1}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{17}{1000}
\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}
+\setfont\reducedtt\ttshape{10}{1000}
+\setfont\reducedbf\bfshape{10}{1000}
+\setfont\reducedit\itshape{10}{1000}
+\setfont\reducedsl\slshape{10}{1000}
+\setfont\reducedsf\sfshape{10}{1000}
+\setfont\reducedsc\scshape{10}{1000}
+\setfont\reducedttsl\ttslshape{10}{1000}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families. Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+ \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+ \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+ \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE. We do this because \STYLE needs to also set the
+% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower). These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+ \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+ \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+ \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+ \let\tenttsl=\textttsl
+ \def\curfontsize{text}%
+ \def\lsize{reduced}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+ \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+ \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+ \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+ \let\tenttsl=\titlettsl
+ \def\curfontsize{title}%
+ \def\lsize{chap}\def\lllsize{subsec}%
+ \resetmathfonts \setleading{25pt}}
+\def\titlefont#1{{\titlefonts\rm #1}}
+\def\chapfonts{%
+ \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+ \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+ \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+ \let\tenttsl=\chapttsl
+ \def\curfontsize{chap}%
+ \def\lsize{sec}\def\lllsize{text}%
+ \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+ \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+ \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+ \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+ \let\tenttsl=\secttsl
+ \def\curfontsize{sec}%
+ \def\lsize{subsec}\def\lllsize{reduced}%
+ \resetmathfonts \setleading{16pt}}
+\def\subsecfonts{%
+ \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+ \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+ \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+ \let\tenttsl=\ssecttsl
+ \def\curfontsize{ssec}%
+ \def\lsize{text}\def\lllsize{small}%
+ \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+ \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+ \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+ \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+ \let\tenttsl=\reducedttsl
+ \def\curfontsize{reduced}%
+ \def\lsize{small}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+ \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+ \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+ \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+ \let\tenttsl=\smallttsl
+ \def\curfontsize{small}%
+ \def\lsize{smaller}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+ \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+ \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+ \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+ \let\tenttsl=\smallerttsl
+ \def\curfontsize{smaller}%
+ \def\lsize{smaller}\def\lllsize{smaller}%
+ \resetmathfonts \setleading{9.5pt}}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+% 8.5x11=86 smallbook=72 a4=90 a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+% 8.5x11=90+ smallbook=80 a4=90+ a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt. So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+% 8.5x11=71 smallbook=60 a4=75 a5=58
+%
+% I wish the USA used A4 paper.
+% --karl, 24jan03.
+
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\textfonts \rm
+
+% Define these so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
-\font\secrm=cmbx10 scaled \magstep2
-\font\secit=cmti10 scaled \magstep2
-\font\secsl=cmsl10 scaled \magstep2
-\font\sectt=cmtt10 scaled \magstep2
-\font\secsf=cmss10 scaled \magstep2
-\let\secbf=\secrm
-
-\font\ssecrm=cmbx10 scaled \magstep1
-\font\ssecit=cmti10 scaled \magstep1
-\font\ssecsl=cmsl10 scaled \magstep1
-\font\ssectt=cmtt10 scaled \magstep1
-\font\ssecsf=cmss10 scaled \magstep1
-\let\ssecbf=\ssecrm
-
-\def\textfonts{\let\rm=\tenrm\let\it=\tenit\let\sl=\tensl\let\bf=\tenbf%
-\let\sc=\tensc\let\sf=\tensf}
-\def\chapfonts{\let\rm=\chaprm\let\it=\chapit\let\sl=\chapsl\let\bf=\chapbf\let\tt=\chaptt\let\sf=\chapsf}
-\def\secfonts{\let\rm=\secrm\let\it=\secit\let\sl=\secsl\let\bf=\secbf\let\tt=\sectt\let\sf=\secsf}
-\def\subsecfonts{\let\rm=\ssecrm\let\it=\ssecit\let\sl=\ssecsl\let\bf=\ssecbf\let\tt=\ssectt\let\sf=\ssecsf}
% Count depth in font-changes, for error checks
\newcount\fontdepth \fontdepth=0
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}
+\setfont\shortconttt\ttshape{12}{1000}
+
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
%% serif) and @ii for TeX italic
-\def\i#1{{\sl #1}}
-\let\var=\i
-\let\dfn=\i
-\let\emph=\i
-\let\cite=\i
+% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
+% unless the following character is such as not to need one.
+\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
+ \ptexslash\fi\fi\fi}
+\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
+% like \smartslanted except unconditionally uses \ttsl.
+% @var is set to this for defun arguments.
+\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
+
+% like \smartslanted except unconditionally use \sl. We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\var=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% @b, explicit bold.
\def\b#1{{\bf #1}}
\let\strong=\b
-\def\t#1{{\tt \rawbackslash \frenchspacing #1}\null}
-\let\ttfont = \t
-\let\kbd=\t
-\let\code=\t
-\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null}
-\def\key #1{{\tt \uppercase{#1}}\null}
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph. Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dotChar = `\.
+\chardef\exclamChar= `\!
+\chardef\questChar = `\?
+\chardef\semiChar = `\;
+%
+\catcode`@=11
+ \def\plainfrenchspacing{%
+ \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+ \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+ \def\endofsentencespacefactor{1000}% for @. and friends
+ }
+ \def\plainnonfrenchspacing{%
+ \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+ \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+ \def\endofsentencespacefactor{3000}% for @. and friends
+ }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+\def\t#1{%
+ {\tt \rawbackslash \plainfrenchspacing #1}%
+ \null
+}
+\def\samp#1{`\tclose{#1}'\null}
+\setfont\keyrm\rmshape{8}{1000}
+\font\keysy=cmsy9
+\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+ \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+ \vbox{\hrule\kern-0.4pt
+ \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+ \kern-0.4pt\hrule}%
+ \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+% @file, @option are the same as @samp.
\let\file=\samp
+\let\option=\samp
+
+% @code is a modification of @t,
+% which makes spaces the same size as normal in the surrounding text.
+\def\tclose#1{%
+ {%
+ % Change normal interword space to be same as for the current font.
+ \spaceskip = \fontdimen2\font
+ %
+ % Switch to typewriter.
+ \tt
+ %
+ % But `\ ' produces the large typewriter interword space.
+ \def\ {{\spaceskip = 0pt{} }}%
+ %
+ % Turn off hyphenation.
+ \nohyphenation
+ %
+ \rawbackslash
+ \plainfrenchspacing
+ #1%
+ }%
+ \null
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+% -- rms.
+{
+ \catcode`\-=\active
+ \catcode`\_=\active
+ %
+ \global\def\code{\begingroup
+ \catcode`\-=\active \catcode`\_=\active
+ \ifallowcodebreaks
+ \let-\codedash
+ \let_\codeunder
+ \else
+ \let-\realdash
+ \let_\realunder
+ \fi
+ \codex
+ }
+}
+
+\def\realdash{-}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{%
+ % this is all so @math{@code{var_name}+1} can work. In math mode, _
+ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+ % will therefore expand the active definition of _, which is us
+ % (inside @code that is), therefore an endless loop.
+ \ifusingtt{\ifmmode
+ \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+ \else\normalunderscore \fi
+ \discretionary{}{}{}}%
+ {\_}%
+}
+\def\codex #1{\tclose{#1}\endgroup}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__. This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general. @allowcodebreaks provides a way to control this.
+%
+\newif\ifallowcodebreaks \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+ \def\txiarg{#1}%
+ \ifx\txiarg\keywordtrue
+ \allowcodebreakstrue
+ \else\ifx\txiarg\keywordfalse
+ \allowcodebreaksfalse
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @allowcodebreaks option `\txiarg'}%
+ \fi\fi
+}
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+% `example' (@kbd uses ttsl only inside of @example and friends),
+% or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+ \def\txiarg{#1}%
+ \ifx\txiarg\worddistinct
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+ \else\ifx\txiarg\wordexample
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+ \else\ifx\txiarg\wordcode
+ \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @kbdinputstyle option `\txiarg'}%
+ \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct.'
+\kbdinputstyle distinct
+
+\def\xkey{\key}
+\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
+\ifx\one\xkey\ifx\threex\three \key{#2}%
+\else{\tclose{\kbdfont\look}}\fi
+\else{\tclose{\kbdfont\look}}\fi}
+
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
+\let\env=\code
+\let\command=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself. First (mandatory) arg is the url. Perhaps eventually put in
+% a hypertex \special here.
+%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{\begingroup
+ \unsepspaces
+ \pdfurl{#1}%
+ \setbox0 = \hbox{\ignorespaces #3}%
+ \ifdim\wd0 > 0pt
+ \unhbox0 % third arg given, show only that
+ \else
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \ifpdf
+ \unhbox0 % PDF: 2nd arg given, show only it
+ \else
+ \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+ \fi
+ \else
+ \code{#1}% only url given, so show it
+ \fi
+ \fi
+ \endlink
+\endgroup}
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+ \def\email#1{\doemail#1,,\finish}
+ \def\doemail#1,#2,#3\finish{\begingroup
+ \unsepspaces
+ \pdfurl{mailto:#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+ \endlink
+ \endgroup}
+\else
+ \let\email=\uref
+\fi
-\def\l#1{{\li #1}\null}
+% Check if we are currently using a typewriter font. Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-\def\r#1{{\rm #1}}
-\def\s#1{{\sc #1}}
-\def\ii#1{{\it #1}}
+% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find. We need it for
+% Polish suppressed-l. --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}} % roman font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+ {\selectfonts\lsize #1}%
+ \def\temp{#2}%
+ \ifx\temp\empty \else
+ \space ({\unsepspaces \ignorespaces \temp \unskip})%
+ \fi
+}
-\def\titlefont#1{{\titlerm #1}}
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+ {\plainfrenchspacing #1}%
+ \def\temp{#2}%
+ \ifx\temp\empty \else
+ \space ({\unsepspaces \ignorespaces \temp \unskip})%
+ \fi
+}
-\def\titlepage{\begingroup \parindent=0pt \hbox{}%
-\let\oldpage=\page
-\def\page{\oldpage \hbox{}}}
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that. The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math. Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+ % We set the font at each command, rather than predefining it in
+ % \textfonts and the other font-switching commands, so that
+ % installations which never need the symbol don't have to have the
+ % font installed.
+ %
+ % There is only one designed size (nominal 10pt), so we always scale
+ % that to the current nominal size.
+ %
+ % By the way, simply using "at 1em" works for cmr10 and the like, but
+ % does not work for cmbx10 and other extended/shrunken fonts.
+ %
+ \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+ %
+ \ifx\curfontstyle\bfstylename
+ % bold:
+ \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+ \else
+ % regular:
+ \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+ \fi
+ \thiseurofont
+}
-\def\Etitlepage{\endgroup\page\HEADINGSon}
+% @registeredsymbol - R in a circle. The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+ $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+ \hfil\crcr\Orb}}%
+ }$%
+}
-% Make altmode in file print out right
+% Laurent Siebenmann reports \Orb undefined with:
+% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\undefined
+\def\Orb{\mathhexbox20D}
+\fi
-\catcode `\^^[=\active \def^^[{$\diamondsuit$}
\message{page headings,}
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page. Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+ \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+ % Open one extra group, as we want to close it in the middle of \Etitlepage.
+ \begingroup
+ \parindent=0pt \textfonts
+ % Leave some space at the very top of the page.
+ \vglue\titlepagetopglue
+ % No rule at page bottom unless we print one at the top with @title.
+ \finishedtitlepagetrue
+ %
+ % Most title ``pages'' are actually two pages long, with space
+ % at the top of the second. We don't want the ragged left on the second.
+ \let\oldpage = \page
+ \def\page{%
+ \iffinishedtitlepage\else
+ \finishtitlepage
+ \fi
+ \let\page = \oldpage
+ \page
+ \null
+ }%
+}
+
+\def\Etitlepage{%
+ \iffinishedtitlepage\else
+ \finishtitlepage
+ \fi
+ % It is important to do the page break before ending the group,
+ % because the headline and footline are only empty inside the group.
+ % If we use the new definition of \page, we always get a blank page
+ % after the title page, which we certainly don't want.
+ \oldpage
+ \endgroup
+ %
+ % Need this before the \...aftertitlepage checks so that if they are
+ % in effect the toc pages will come out with page numbers.
+ \HEADINGSon
+ %
+ % If they want short, they certainly want long too.
+ \ifsetshortcontentsaftertitlepage
+ \shortcontents
+ \contents
+ \global\let\shortcontents = \relax
+ \global\let\contents = \relax
+ \fi
+ %
+ \ifsetcontentsaftertitlepage
+ \contents
+ \global\let\contents = \relax
+ \global\let\shortcontents = \relax
+ \fi
+}
+
+\def\finishtitlepage{%
+ \vskip4pt \hrule height 2pt width \hsize
+ \vskip\titlepagebottomglue
+ \finishedtitlepagetrue
+}
+
+%%% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+ \let\tt=\authortt}
+
+\parseargdef\title{%
+ \checkenv\titlepage
+ \leftline{\titlefonts\rm #1}
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+ \checkenv\titlepage
+ {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+ \def\temp{\quotation}%
+ \ifx\thisenv\temp
+ \def\quotationauthor{#1}% printed in \Equotation.
+ \else
+ \checkenv\titlepage
+ \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+ {\authorfont \leftline{#1}}%
+ \fi
+}
+
+
%%% Set up page headings and footings.
\let\thispage=\folio
-\newtoks \evenheadline % Token sequence for heading line of even pages
-\newtoks \oddheadline % Token sequence for heading line of odd pages
-\newtoks \evenfootline % Token sequence for footing line of even pages
-\newtoks \oddfootline % Token sequence for footing line of odd pages
+\newtoks\evenheadline % headline on even pages
+\newtoks\oddheadline % headline on odd pages
+\newtoks\evenfootline % footline on even pages
+\newtoks\oddfootline % footline on odd pages
-% Now make Tex use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline \else \the\evenfootline \fi}}
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+ \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+ \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
% Commands to set those variables.
% For example, this is what @headings on does
% @evenfooting @thisfile||
% @oddfooting ||@thisfile
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\everyheading{\parsearg\everyheadingxxx}
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\everyfooting{\parsearg\everyfootingxxx}
-{\catcode`\@=0 %
-
-\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
-\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
-\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
-\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
-\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
-\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+ \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+ %
+ % Leave some space for the footline. Hopefully ok to assume
+ % @evenfooting will not be used by itself.
+ \global\advance\pageheight by -\baselineskip
+ \global\advance\vsize by -\baselineskip
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
-\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-%
-}% unbind the catcode of @.
-% @headings on turns them on.
-% @headings off turns them off.
-% By default, they are off.
+% @headings double turns headings on for double-sided printing.
+% @headings single turns headings on for single-sided printing.
+% @headings off turns them off.
+% @headings on same as @headings double, retained for compatibility.
+% @headings after turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
\def\headings #1 {\csname HEADINGS#1\endcsname}
-\def\HEADINGSoff{
+\def\HEADINGSoff{%
\global\evenheadline={\hfil} \global\evenfootline={\hfil}
\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
\HEADINGSoff
-% When we turn headings on, set the page number to 1,
-% Put current file name in lower left corner,
-% Put chapter name on inside top of right hand pages, document
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
% title on inside top of left hand pages, and page numbers on outside top
% edge of all pages.
-\def\HEADINGSon{
-\pagealignmacro
+\def\HEADINGSdouble{%
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\folio\hfil\thistitle}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
}
% Subroutines used in generating headings
-% Produces Day Month Year style of output.
-\def\today{\number\day\space
-\ifcase\month\or
-January\or February\or March\or April\or May\or June\or
-July\or August\or September\or October\or November\or December\fi
-\space\number\year}
-
-% Use this if you want the Month Day, Year style of output.
-%\def\today{\ifcase\month\or
-%January\or February\or March\or April\or May\or June\or
-%July\or August\or September\or October\or November\or December\fi
-%\space\number\day, \number\year}
-
-% @settitle line... specifies the title of the document, for headings
-% It generates no output of its own
-
-\def\thistitle{No Title}
-\def\settitle{\parsearg\settitlezzz}
-\def\settitlezzz #1{\gdef\thistitle{#1}}
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\undefined
+\def\today{%
+ \number\day\space
+ \ifcase\month
+ \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+ \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+ \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+ \fi
+ \space\number\year}
+\fi
-\message{tables,}
+% @settitle line... specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
-% Tables -- @table, @ftable, @item(x), @kitem(x), @xitem(x).
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
% default indentation of table text
\newdimen\tableindent \tableindent=.8in
% used internally for \itemindent minus \itemmargin
\newdimen\itemmax
-% Note @table and @ftable define @item, @itemx, etc., with these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+ \advance\hsize by -\rightskip
+ \advance\hsize by -\tableindent
+ \setbox0=\hbox{\itemindicate{#1}}%
+ \itemindex{#1}%
+ \nobreak % This prevents a break before @itemx.
+ %
+ % If the item text does not fit in the space we have, put it on a line
+ % by itself, and do not allow a page break either before or after that
+ % line. We do not start a paragraph here because then if the next
+ % command is, e.g., @kindex, the whatsit would get put into the
+ % horizontal list on a line by itself, resulting in extra blank space.
+ \ifdim \wd0>\itemmax
+ %
+ % Make this a paragraph so we get the \parskip glue and wrapping,
+ % but leave it ragged-right.
+ \begingroup
+ \advance\leftskip by-\tableindent
+ \advance\hsize by\tableindent
+ \advance\rightskip by0pt plus1fil
+ \leavevmode\unhbox0\par
+ \endgroup
+ %
+ % We're going to be starting a paragraph, but we don't want the
+ % \parskip glue -- logically it's part of the @item we just started.
+ \nobreak \vskip-\parskip
+ %
+ % Stop a page break at the \parskip glue coming up. However, if
+ % what follows is an environment such as @example, there will be no
+ % \parskip glue; then the negative vskip we just inserted would
+ % cause the example and the item to crash together. So we use this
+ % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+ % \parskip glue after all. Section titles are handled this way also.
+ %
+ \penalty 10001
+ \endgroup
+ \itemxneedsnegativevskipfalse
+ \else
+ % The item text fits into the space. Start a paragraph, so that the
+ % following text (if any) will end up on the same line.
+ \noindent
+ % Do this with kerns and \unhbox so that if there is a footnote in
+ % the item text, it can migrate to the main vertical list and
+ % eventually be printed.
+ \nobreak\kern-\tableindent
+ \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+ \unhbox0
+ \nobreak\kern\dimen0
+ \endgroup
+ \itemxneedsnegativevskiptrue
+ \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+ \let\itemindex\gobble
+ \tablecheck{table}%
+}
+\envdef\ftable{%
+ \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+ \tablecheck{ftable}%
+}
+\envdef\vtable{%
+ \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+ \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+ \ifnum \the\catcode`\^^M=\active
+ \endgroup
+ \errmessage{This command won't work in this context; perhaps the problem is
+ that we are \inenvironment\thisenv}%
+ \def\next{\doignore{#1}}%
+ \else
+ \let\next\tablex
+ \fi
+ \next
+}
+\def\tablex#1{%
+ \def\itemindicate{#1}%
+ \parsearg\tabley
+}
+\def\tabley#1{%
+ {%
+ \makevalueexpandable
+ \edef\temp{\noexpand\tablez #1\space\space\space}%
+ \expandafter
+ }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+ \aboveenvbreak
+ \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+ \ifnum 0#2>0 \tableindent=#2\mil \fi
+ \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+ \itemmax=\tableindent
+ \advance \itemmax by -\itemmargin
+ \advance \leftskip by \tableindent
+ \exdentamount=\tableindent
+ \parindent = 0pt
+ \parskip = \smallskipamount
+ \ifdim \parskip=0pt \parskip=2pt \fi
+ \let\item = \internalBitem
+ \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+ \aboveenvbreak
+ \itemmax=\itemindent
+ \advance\itemmax by -\itemmargin
+ \advance\leftskip by \itemindent
+ \exdentamount=\itemindent
+ \parindent=0pt
+ \parskip=\smallskipamount
+ \ifdim\parskip=0pt \parskip=2pt \fi
+ \def\itemcontents{#1}%
+ % @itemize with no arg is equivalent to @itemize @bullet.
+ \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+ \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+ \advance\itemno by 1 % for enumerations
+ {\let\par=\endgraf \smallbreak}% reasonable place to break
+ {%
+ % If the document has an @itemize directly after a section title, a
+ % \nobreak will be last on the list, and \sectionheading will have
+ % done a \vskip-\parskip. In that case, we don't want to zero
+ % parskip, or the item text will crash with the heading. On the
+ % other hand, when there is normal text preceding the item (as there
+ % usually is), we do want to zero parskip, or there would be too much
+ % space. In that case, we won't have a \nobreak before. At least
+ % that's the theory.
+ \ifnum\lastpenalty<10000 \parskip=0in \fi
+ \noindent
+ \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+ \vadjust{\penalty 1200}}% not good to break after first line of item.
+ \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list. No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1 \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+ % If we were given no argument, pretend we were given `1'.
+ \def\thearg{#1}%
+ \ifx\thearg\empty \def\thearg{1}\fi
+ %
+ % Detect if the argument is a single token. If so, it might be a
+ % letter. Otherwise, the only valid thing it can be is a number.
+ % (We will always have one token, because of the test we just made.
+ % This is a good thing, since \splitoff doesn't work given nothing at
+ % all -- the first parameter is undelimited.)
+ \expandafter\splitoff\thearg\endmark
+ \ifx\rest\empty
+ % Only one token in the argument. It could still be anything.
+ % A ``lowercase letter'' is one whose \lccode is nonzero.
+ % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+ % not equal to itself.
+ % Otherwise, we assume it's a number.
+ %
+ % We need the \relax at the end of the \ifnum lines to stop TeX from
+ % continuing to look for a <number>.
+ %
+ \ifnum\lccode\expandafter`\thearg=0\relax
+ \numericenumerate % a number (we hope)
+ \else
+ % It's a letter.
+ \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+ \lowercaseenumerate % lowercase letter
+ \else
+ \uppercaseenumerate % uppercase letter
+ \fi
+ \fi
+ \else
+ % Multiple tokens in the argument. We hope it's a number.
+ \numericenumerate
+ \fi
+}
+
+% An @enumerate whose labels are integers. The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+ \itemno = \thearg
+ \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more lowercase letters in @enumerate; get a bigger
+ alphabet}%
+ \fi
+ \char\lccode\itemno
+ }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+ \itemno = \expandafter`\thearg
+ \startenumeration{%
+ % Be sure we're not beyond the end of the alphabet.
+ \ifnum\itemno=0
+ \errmessage{No more uppercase letters in @enumerate; get a bigger
+ alphabet}
+ \fi
+ \char\uccode\itemno
+ }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments. Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+ \advance\itemno by -1
+ \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble. Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+% @multitable @columnfractions .25 .3 .45
+% @item ...
+%
+% Numbers following @columnfractions are the percent of the total
+% current hsize to be used for each column. You may use as many
+% columns as desired.
+
+
+% Or use a template:
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item ...
+% using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+% @item first col stuff @tab second col stuff @tab third col
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
+% @tab Many paragraphs of text may be used in any column.
+%
+% They will wrap at the width determined by the template.
+% @item@tab@tab This will be in third column.
+% @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+% to baseline.
+% 0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1. We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+ \global\advance\colcount by 1
+ \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+ \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+ \def\firstarg{#1}%
+ \ifx\firstarg\xendsetuptable
+ \let\go = \relax
+ \else
+ \ifx\firstarg\xcolumnfractions
+ \global\setpercenttrue
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction
+ \else
+ \global\advance\colcount by 1
+ \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+ % separator; typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi
+ \fi
+ \ifx\go\pickupwholefraction
+ % Put the argument back for the \pickupwholefraction call, so
+ % we'll always have a period there to be parsed.
+ \def\go{\pickupwholefraction#1}%
+ \else
+ \let\go = \setuptable
+ \fi%
+ \fi
+ \go
+}
+
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry. Note that \everycr resets \everytab.
+\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}%
+%
+% A \tab used to include \hskip1sp. But then the space in a template
+% line is not enough. That is bad. So let's go back to just `&' until
+% we encounter the problem it was intended to solve again.
+% --karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab % insert after every tab.
+%
+\envdef\multitable{%
+ \vskip\parskip
+ \startsavinginserts
+ %
+ % @item within a multitable starts a normal row.
+ % We use \def instead of \let so that if one of the multitable entries
+ % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+ % \endtemplate) expanding \doitemize.
+ \def\item{\crcr}%
+ %
+ \tolerance=9500
+ \hbadness=9500
+ \setmultitablespacing
+ \parskip=\multitableparskip
+ \parindent=\multitableparindent
+ \overfullrule=0pt
+ \global\colcount=0
+ %
+ \everycr = {%
+ \noalign{%
+ \global\everytab={}%
+ \global\colcount=0 % Reset the column counter.
+ % Check for saved footnotes, etc.
+ \checkinserts
+ % Keeps underfull box messages off when table breaks over pages.
+ %\filbreak
+ % Maybe so, but it also creates really weird page breaks when the
+ % table breaks over pages. Wouldn't \vfil be better? Wait until the
+ % problem manifests itself, so it can be fixed for real --karl.
+ }%
+ }%
+ %
+ \parsearg\domultitable
+}
+\def\domultitable#1{%
+ % To parse everything between @multitable and @item:
+ \setuptable#1 \endsetuptable
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+ \halign\bgroup &%
+ \global\advance\colcount by 1
+ \multistrut
+ \vtop{%
+ % Use the current \colcount to find the correct column width:
+ \hsize=\expandafter\csname col\the\colcount\endcsname
+ %
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
+ \else
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
+ \fi
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively
+ % marking characters.
+ \noindent\ignorespaces##\unskip\multistrut
+ }\cr
+}
+\def\Emultitable{%
+ \crcr
+ \egroup % end the \halign
+ \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+ \def\multistrut{\strut}% just use the standard line spacing
+ %
+ % Compute \multitablelinespace (if not defined by user) for use in
+ % \multitableparskip calculation. We used define \multistrut based on
+ % this, but (ironically) that caused the spacing to be off.
+ % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi}
+
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\par \parsearg\itemzzz}
+\message{conditionals,}
-\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \par \parsearg\xitemzzz}
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed. They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested. But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+ \expandafter\let\csname #1\endcsname = \relax
+ \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+ % Scan in ``verbatim'' mode:
+ \obeylines
+ \catcode`\@ = \other
+ \catcode`\{ = \other
+ \catcode`\} = \other
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \spaceisspace
+ %
+ % Count number of #1's that we've seen.
+ \doignorecount = 0
+ %
+ % Swallow text until we reach the matching `@end #1'.
+ \dodoignore{#1}%
+}
-\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\par \parsearg\kitemzzz}
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+ \obeylines %
+ %
+ \gdef\dodoignore#1{%
+ % #1 contains the command name as a string, e.g., `ifinfo'.
+ %
+ % Define a command to find the next `@end #1'.
+ \long\def\doignoretext##1^^M@end #1{%
+ \doignoretextyyy##1^^M@#1\_STOP_}%
+ %
+ % And this command to find another #1 command, at the beginning of a
+ % line. (Otherwise, we would consider a line `@c @ifset', for
+ % example, to count as an @ifset for nesting.)
+ \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+ %
+ % And now expand that command.
+ \doignoretext ^^M%
+ }%
+}
-\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}\itemzzz {#1}}
+\def\doignoreyyy#1{%
+ \def\temp{#1}%
+ \ifx\temp\empty % Nothing found.
+ \let\next\doignoretextzzz
+ \else % Found a nested condition, ...
+ \advance\doignorecount by 1
+ \let\next\doignoretextyyy % ..., look for another.
+ % If we're here, #1 ends with ^^M\ifinfo (for example).
+ \fi
+ \next #1% the token \_STOP_ is present just after this macro.
+}
-\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}\itemzzz {#1}}
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+ \ifnum\doignorecount = 0 % We have just found the outermost @end.
+ \let\next\enddoignore
+ \else % Still inside a nested condition.
+ \advance\doignorecount by -1
+ \let\next\doignoretext % Look for the next @end.
+ \fi
+ \next
+}
-\def\itemzzz #1{\begingroup %
-\advance \hsize by -\rightskip %
-\advance \hsize by -\leftskip %
-\setbox0=\hbox{\itemfont{#1}}%
-\itemindex{#1}%
-\parskip=0in %
-\noindent %
-\ifdim \wd0>\itemmax %
-\vadjust{\penalty 10000}%
-\hbox to \hsize{\hskip -\tableindent\box0\hss}\ %
-\else %
-\hbox to 0pt{\hskip -\tableindent\box0\hss}%
-\fi %
-\endgroup %
-}
-
-\def\item{\errmessage{@item while not in a table}}
-\def\itemx{\errmessage{@itemx while not in a table}}
-\def\kitem{\errmessage{@kitem while not in a table}}
-\def\kitemx{\errmessage{@kitemx while not in a table}}
-\def\xitem{\errmessage{@xitem while not in a table}}
-\def\xitemx{\errmessage{@xitemx while not in a table}}
-
-%% Contains a kludge to get @end[description] to work
-\def\description{\tablez{\dontindex}{1}{}{}{}{}}
-
-\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
-{\obeylines\obeyspaces%
-\gdef\tablex #1^^M{%
-\tabley\dontindex#1 \endtabley}}
-
-\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
-{\obeylines\obeyspaces%
-\gdef\ftablex #1^^M{%
-\tabley\fnitemindex#1 \endtabley}}
-
-\def\dontindex #1{}
-\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
-
-{\obeyspaces %
-\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
-
-\def\tablez #1#2#3#4#5#6{%
-\aboveenvbreak %
-\begingroup %
-\def\Edescription{\Etable}% Neccessary kludge.
-\let\itemindex=#1%
-\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
-\ifnum 0#4>0 \tableindent=#4\mil \fi %
-\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
-\def\itemfont{#2}%
-\itemmax=\tableindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \tableindent %
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\endgroup\afterenvbreak}%
-\let\item = \internalBitem %
-\let\itemx = \internalBitemx %
-\let\kitem = \internalBkitem %
-\let\kitemx = \internalBkitemx %
-\let\xitem = \internalBxitem %
-\let\xitemx = \internalBxitemx %
+% Finish off ignored text.
+{ \obeylines%
+ % Ignore anything after the last `@end #1'; this matters in verbatim
+ % environments, where otherwise the newline after an ignored conditional
+ % would result in a blank line in the output.
+ \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
}
-% This is the counter used by @enumerate, which is really @itemize
-\newcount \itemno
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ {%
+ \makevalueexpandable
+ \def\temp{#2}%
+ \edef\next{\gdef\makecsname{SET#1}}%
+ \ifx\temp\empty
+ \next{}%
+ \else
+ \setzzz#2\endsetzzz
+ \fi
+ }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
-\def\itemize{\parsearg\itemizezzz}
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+ {%
+ \makevalueexpandable
+ \global\expandafter\let\csname SET#1\endcsname=\relax
+ }%
+}
-\def\itemizezzz #1{\itemizey {#1}{\Eitemize}}
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+ \catcode`\- = \active \catcode`\_ = \active
+ %
+ \gdef\makevalueexpandable{%
+ \let\value = \expandablevalue
+ % We don't want these characters active, ...
+ \catcode`\-=\other \catcode`\_=\other
+ % ..., but we might end up with active ones in the argument if
+ % we're called from @code, as @code{@value{foo-bar_}}, though.
+ % So \let them to their normal equivalents.
+ \let-\realdash \let_\normalunderscore
+ }
+}
-\def\itemizey #1#2{%
-\aboveenvbreak %
-\begingroup %
-\itemno = 0 %
-\itemmax=\itemindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \itemindent %
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def#2{\endgraf\endgroup\afterenvbreak}%
-\def\itemcontents{#1}%
-\let\item=\itemizeitem}
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file. This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {[No value for ``#1'']}%
+ \message{Variable `#1', used in @value, is not set.}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
-\def\bullet{$\ptexbullet$}
-\def\minus{$-$}
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+ {%
+ \makevalueexpandable
+ \let\next=\empty
+ \expandafter\ifx\csname SET#2\endcsname\relax
+ #1% If not set, redefine \next.
+ \fi
+ \expandafter
+ }\next
+}
+\def\ifsetfail{\doignore{ifset}}
-\def\enumerate{\itemizey{\the\itemno.}\Eenumerate\flushcr}
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
-% Definition of @item while inside @itemize.
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
-\def\itemizeitem{%
-\advance\itemno by 1
-{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{\in hmode at itemizeitem}\fi
-{\parskip=0in \hskip 0pt
-\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
-\vadjust{\penalty 300}}%
-\flushcr}
\message{indexing,}
% Index generation facilities
% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
% \newindex {foo} defines an index named foo.
% It automatically defines \fooindex such that
% \fooindex ...rest of line... puts an entry in the index foo.
% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
+% the file that accumulates this index. The file's extension is foo.
% The name of an index should be no more than 2 characters long
% for the sake of vms.
-
-\def\newindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#1}}
+%
+\def\newindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
+ \noexpand\doindex{#1}}
}
% @defindex foo == \newindex{foo}
-
+%
\def\defindex{\parsearg\newindex}
% Define @defcodeindex, like @defindex except put all entries in @code.
-
-\def\newcodeindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#1}}
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{%
+ \noexpand\docodeindex{#1}}%
}
-\def\defcodeindex{\parsearg\newcodeindex}
% @synindex foo bar makes index foo feed into index bar.
% Do this instead of @defindex foo if you don't want it as a separate index.
-\def\synindex #1 #2 {%
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#2}}%
-}
-
+%
% @syncodeindex foo bar similar, but put all entries made for index foo
% inside @code.
-\def\syncodeindex #1 #2 {%
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#2}}%
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+ % Only do \closeout if we haven't already done it, else we'll end up
+ % closing the target index.
+ \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+ % The \closeout helps reduce unnecessary open files; the limit on the
+ % Acorn RISC OS is a mere 16 files.
+ \expandafter\closeout\csname#2indfile\endcsname
+ \expandafter\let\csname\donesynindex#2\endcsname = 1
+ \fi
+ % redefine \fooindfile:
+ \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+ \expandafter\let\csname#2indfile\endcsname=\temp
+ % redefine \fooindex:
+ \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
}
% Define \doindex, the driver for all \fooindex macros.
\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
\def\indexdummies{%
-\def\bf{\realbackslash bf }%
-\def\rm{\realbackslash rm }%
-\def\sl{\realbackslash sl }%
-\def\dots{\realbackslash dots }%
-\def\copyright{\realbackslash copyright }%
+ \escapechar = `\\ % use backslash in output files.
+ \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+ \def\ {\realbackslash\space }%
+ % Need these in case \tex is in effect and \{ is a \delimiter again.
+ % But can't use \lbracecmd and \rbracecmd because texindex assumes
+ % braces and backslashes are used only as delimiters.
+ \let\{ = \mylbrace
+ \let\} = \myrbrace
+ %
+ % Do the redefinitions.
+ \commondummies
}
-% \indexnofonts no-ops all font-change commands.
-% This is used when outputting the strings to sort the index by.
-\def\indexdummyfont#1{#1}
-\def\indexnofonts{%
-\let\code=\indexdummyfont
-\let\samp=\indexdummyfont
-\let\kbd=\indexdummyfont
-\let\key=\indexdummyfont
-\let\var=\indexdummyfont
+% For the aux and toc files, @ is the escape character. So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files). When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+ \def\@{@@}%
+ \def\ {@ }%
+ \let\{ = \lbraceatcmd
+ \let\} = \rbraceatcmd
+ %
+ % Do the redefinitions.
+ \commondummies
+ \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+ %
+ % \definedummyword defines \#1 as \string\#1\space, thus effectively
+ % preventing its expansion. This is used only for control% words,
+ % not control letters, because the \space would be incorrect for
+ % control characters, but is needed to separate the control word
+ % from whatever follows.
+ %
+ % For control letters, we have \definedummyletter, which omits the
+ % space.
+ %
+ % These can be used both for control words that take an argument and
+ % those that do not. If it is followed by {arg} in the input, then
+ % that will dutifully get written to the index (or wherever).
+ %
+ \def\definedummyword ##1{\def##1{\string##1\space}}%
+ \def\definedummyletter##1{\def##1{\string##1}}%
+ \let\definedummyaccent\definedummyletter
+ %
+ \commondummiesnofonts
+ %
+ \definedummyletter\_%
+ %
+ % Non-English letters.
+ \definedummyword\AA
+ \definedummyword\AE
+ \definedummyword\L
+ \definedummyword\OE
+ \definedummyword\O
+ \definedummyword\aa
+ \definedummyword\ae
+ \definedummyword\l
+ \definedummyword\oe
+ \definedummyword\o
+ \definedummyword\ss
+ \definedummyword\exclamdown
+ \definedummyword\questiondown
+ \definedummyword\ordf
+ \definedummyword\ordm
+ %
+ % Although these internal commands shouldn't show up, sometimes they do.
+ \definedummyword\bf
+ \definedummyword\gtr
+ \definedummyword\hat
+ \definedummyword\less
+ \definedummyword\sf
+ \definedummyword\sl
+ \definedummyword\tclose
+ \definedummyword\tt
+ %
+ \definedummyword\LaTeX
+ \definedummyword\TeX
+ %
+ % Assorted special characters.
+ \definedummyword\bullet
+ \definedummyword\comma
+ \definedummyword\copyright
+ \definedummyword\registeredsymbol
+ \definedummyword\dots
+ \definedummyword\enddots
+ \definedummyword\equiv
+ \definedummyword\error
+ \definedummyword\euro
+ \definedummyword\expansion
+ \definedummyword\minus
+ \definedummyword\pounds
+ \definedummyword\point
+ \definedummyword\print
+ \definedummyword\result
+ %
+ % We want to disable all macros so that they are not expanded by \write.
+ \macrolist
+ %
+ \normalturnoffactive
+ %
+ % Handle some cases of @value -- where it does not contain any
+ % (non-fully-expandable) commands.
+ \makevalueexpandable
}
-% To define \realbackslash, we must make \ not be an escape.
-% We must first make another character (@) an escape
-% so we do not become unable to do a definition.
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+\def\commondummiesnofonts{%
+ % Control letters and accents.
+ \definedummyletter\!%
+ \definedummyaccent\"%
+ \definedummyaccent\'%
+ \definedummyletter\*%
+ \definedummyaccent\,%
+ \definedummyletter\.%
+ \definedummyletter\/%
+ \definedummyletter\:%
+ \definedummyaccent\=%
+ \definedummyletter\?%
+ \definedummyaccent\^%
+ \definedummyaccent\`%
+ \definedummyaccent\~%
+ \definedummyword\u
+ \definedummyword\v
+ \definedummyword\H
+ \definedummyword\dotaccent
+ \definedummyword\ringaccent
+ \definedummyword\tieaccent
+ \definedummyword\ubaraccent
+ \definedummyword\udotaccent
+ \definedummyword\dotless
+ %
+ % Texinfo font commands.
+ \definedummyword\b
+ \definedummyword\i
+ \definedummyword\r
+ \definedummyword\sc
+ \definedummyword\t
+ %
+ % Commands that take arguments.
+ \definedummyword\acronym
+ \definedummyword\cite
+ \definedummyword\code
+ \definedummyword\command
+ \definedummyword\dfn
+ \definedummyword\emph
+ \definedummyword\env
+ \definedummyword\file
+ \definedummyword\kbd
+ \definedummyword\key
+ \definedummyword\math
+ \definedummyword\option
+ \definedummyword\pxref
+ \definedummyword\ref
+ \definedummyword\samp
+ \definedummyword\strong
+ \definedummyword\tie
+ \definedummyword\uref
+ \definedummyword\url
+ \definedummyword\var
+ \definedummyword\verb
+ \definedummyword\w
+ \definedummyword\xref
+}
-{\catcode`\@=0 \catcode`\\=\other
-@gdef@realbackslash{\}}
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names. It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+ % Accent commands should become @asis.
+ \def\definedummyaccent##1{\let##1\asis}%
+ % We can just ignore other control letters.
+ \def\definedummyletter##1{\let##1\empty}%
+ % Hopefully, all control words can become @asis.
+ \let\definedummyword\definedummyaccent
+ %
+ \commondummiesnofonts
+ %
+ % Don't no-op \tt, since it isn't a user-level command
+ % and is used in the definitions of the active chars like <, >, |, etc.
+ % Likewise with the other plain tex font commands.
+ %\let\tt=\asis
+ %
+ \def\ { }%
+ \def\@{@}%
+ % how to handle braces?
+ \def\_{\normalunderscore}%
+ %
+ % Non-English letters.
+ \def\AA{AA}%
+ \def\AE{AE}%
+ \def\L{L}%
+ \def\OE{OE}%
+ \def\O{O}%
+ \def\aa{aa}%
+ \def\ae{ae}%
+ \def\l{l}%
+ \def\oe{oe}%
+ \def\o{o}%
+ \def\ss{ss}%
+ \def\exclamdown{!}%
+ \def\questiondown{?}%
+ \def\ordf{a}%
+ \def\ordm{o}%
+ %
+ \def\LaTeX{LaTeX}%
+ \def\TeX{TeX}%
+ %
+ % Assorted special characters.
+ % (The following {} will end up in the sort string, but that's ok.)
+ \def\bullet{bullet}%
+ \def\comma{,}%
+ \def\copyright{copyright}%
+ \def\registeredsymbol{R}%
+ \def\dots{...}%
+ \def\enddots{...}%
+ \def\equiv{==}%
+ \def\error{error}%
+ \def\euro{euro}%
+ \def\expansion{==>}%
+ \def\minus{-}%
+ \def\pounds{pounds}%
+ \def\point{.}%
+ \def\print{-|}%
+ \def\result{=>}%
+ %
+ % We need to get rid of all macros, leaving only the arguments (if present).
+ % Of course this is not nearly correct, but it is the best we can do for now.
+ % makeinfo does not expand macros in the argument to @deffn, which ends up
+ % writing an index entry, and texindex isn't prepared for an index sort entry
+ % that starts with \.
+ %
+ % Since macro invocations are followed by braces, we can just redefine them
+ % to take a single TeX argument. The case of a macro invocation that
+ % goes to end-of-line is not handled.
+ %
+ \macrolist
+}
\let\indexbackslash=0 %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-\def\doind #1#2{%
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\count10=\lastpenalty %
-\escapechar=`\\%
-{\let\folio=0% Expand all macros now EXCEPT \folio
-\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-% so it will be output as is; and it will print as backslash in the indx.
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}}}%
-\temp }%
-\penalty\count10}}
-
-\def\dosubind #1#2#3{%
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\count10=\lastpenalty %
-\escapechar=`\\%
-{\let\folio=0%
-\def\rawbackslashxx{\indexbackslash}%
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2 #3}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
-\temp }%
-\penalty\count10}}
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+ \iflinks
+ {%
+ % Store the main index entry text (including the third arg).
+ \toks0 = {#2}%
+ % If third arg is present, precede it with a space.
+ \def\thirdarg{#3}%
+ \ifx\thirdarg\empty \else
+ \toks0 = \expandafter{\the\toks0 \space #3}%
+ \fi
+ %
+ \edef\writeto{\csname#1indfile\endcsname}%
+ %
+ \ifvmode
+ \dosubindsanitize
+ \else
+ \dosubindwrite
+ \fi
+ }%
+ \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+ % Put the index entry in the margin if desired.
+ \ifx\SETmarginindex\relax\else
+ \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+ \fi
+ %
+ % Remember, we are within a group.
+ \indexdummies % Must do this here, since \bf, etc expand at this stage
+ \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+ % so it will be output as is; and it will print as backslash.
+ %
+ % Process the index entry with all font commands turned off, to
+ % get the string to sort by.
+ {\indexnofonts
+ \edef\temp{\the\toks0}% need full expansion
+ \xdef\indexsorttmp{\temp}%
+ }%
+ %
+ % Set up the complete index entry, with both the sort key and
+ % the original text, including any font commands. We write
+ % three arguments to \entry to the .?? file (four in the
+ % subentry case), texindex reduces to two when writing the .??s
+ % sorted result.
+ \edef\temp{%
+ \write\writeto{%
+ \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+ }%
+ \temp
+}
+
+% Take care of unwanted page breaks:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again. Otherwise, the whatsit generated by the
+% \write will make \lastskip zero. The result is that sequences
+% like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode. We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip. \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip. The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+% ..., ready, GO:
+%
+\def\dosubindsanitize{%
+ % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+ \skip0 = \lastskip
+ \edef\lastskipmacro{\the\lastskip}%
+ \count255 = \lastpenalty
+ %
+ % If \lastskip is nonzero, that means the last item was a
+ % skip. And since a skip is discardable, that means this
+ % -\skip0 glue we're inserting is preceded by a
+ % non-discardable item, therefore it is not a potential
+ % breakpoint, therefore no \nobreak needed.
+ \ifx\lastskipmacro\zeroskipmacro
+ \else
+ \vskip-\skip0
+ \fi
+ %
+ \dosubindwrite
+ %
+ \ifx\lastskipmacro\zeroskipmacro
+ % If \lastskip was zero, perhaps the last item was a penalty, and
+ % perhaps it was >=10000, e.g., a \nobreak. In that case, we want
+ % to re-insert the same penalty (values >10000 are used for various
+ % signals); since we just inserted a non-discardable item, any
+ % following glue (such as a \parskip) would be a breakpoint. For example:
+ %
+ % @deffn deffn-whatever
+ % @vindex index-whatever
+ % Description.
+ % would allow a break between the index-whatever whatsit
+ % and the "Description." paragraph.
+ \ifnum\count255>9999 \penalty\count255 \fi
+ \else
+ % On the other hand, if we had a nonzero \lastskip,
+ % this make-up glue would be preceded by a non-discardable item
+ % (the whatsit from the \write), so we must insert a \nobreak.
+ \nobreak\vskip\skip0
+ \fi
+}
% The index entry written in the file actually looks like
% \entry {sortstring}{page}{topic}
% \secondary {subtopic}{pagelist}
% for each subtopic.
-% Define the user-accessible indexing commands
+% Define the user-accessible indexing commands
% @findex, @vindex, @kindex, @cindex.
\def\findex {\fnindex}
% Define the macros used in formatting output of the sorted index material.
-% This is what you call to cause a particular index to get printed.
-% Write
-% @unnumbered Function Index
-% @printindex fn
-
-\def\printindex{\parsearg\doprintindex}
-
-\def\doprintindex#1{\tex %
-\catcode`\%=\other\catcode`\&=\other\catcode`\#=\other
-\catcode`\$=\other\catcode`\_=\other
-\catcode`\~=\other
-\def\indexbackslash{\rawbackslashxx}
-\indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt
-\begindoublecolumns
-\openin 1 \jobname.#1s
-\ifeof 1 \else \closein 1 \input \jobname.#1s
-\fi
-\enddoublecolumns
-\Etex}
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+ \dobreak \chapheadingskip{10000}%
+ %
+ \smallfonts \rm
+ \tolerance = 9500
+ \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+ %
+ % See if the index file exists and is nonempty.
+ % Change catcode of @ here so that if the index file contains
+ % \initial {@}
+ % as its first line, TeX doesn't complain about mismatched braces
+ % (because it thinks @} is a control sequence).
+ \catcode`\@ = 11
+ \openin 1 \jobname.#1s
+ \ifeof 1
+ % \enddoublecolumns gets confused if there is no text in the index,
+ % and it loses the chapter title and the aux file entries for the
+ % index. The easiest way to prevent this problem is to make sure
+ % there is some text.
+ \putwordIndexNonexistent
+ \else
+ %
+ % If the index file exists but is empty, then \openin leaves \ifeof
+ % false. We have to make TeX try to read something from the file, so
+ % it can discover if there is anything in it.
+ \read 1 to \temp
+ \ifeof 1
+ \putwordIndexIsEmpty
+ \else
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \def\indexbackslash{\backslashcurfont}%
+ \catcode`\\ = 0
+ \escapechar = `\\
+ \begindoublecolumns
+ \input \jobname.#1s
+ \enddoublecolumns
+ \fi
+ \fi
+ \closein 1
+\endgroup}
% These macros are used by the sorted index file itself.
% Change them to control the appearance of the index.
-% Same as \bigskipamount except no shrink.
-% \balancecolumns gets confused if there is any shrink.
-\newskip\initialskipamount \initialskipamount 12pt plus4pt
+\def\initial#1{{%
+ % Some minor font changes for the special characters.
+ \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+ %
+ % Remove any glue we may have, we'll be inserting our own.
+ \removelastskip
+ %
+ % We like breaks before the index initials, so insert a bonus.
+ \nobreak
+ \vskip 0pt plus 3\baselineskip
+ \penalty 0
+ \vskip 0pt plus -3\baselineskip
+ %
+ % Typeset the initial. Making this add up to a whole number of
+ % baselineskips increases the chance of the dots lining up from column
+ % to column. It still won't often be perfect, because of the stretch
+ % we need before each entry, but it's better.
+ %
+ % No shrink because it confuses \balancecolumns.
+ \vskip 1.67\baselineskip plus .5\baselineskip
+ \leftline{\secbf #1}%
+ % Do our best not to break after the initial.
+ \nobreak
+ \vskip .33\baselineskip plus .1\baselineskip
+}}
-\outer\def\initial #1{%
-{\let\tentt=\sectt \let\sf=\sectt
-\ifdim\lastskip<\initialskipamount
-\removelastskip \penalty-200 \vskip \initialskipamount\fi
-\line{\secbf#1\hfill}\kern 2pt\penalty3000}}
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin. It is used for index
+% and table of contents entries. The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+% \def\entry#1#2{...
+% But this frozes the catcodes in the argument, and can cause problems to
+% @code, which sets - active. This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+%
+% The right solution is to prevent \entry from swallowing the whole text.
+% --kasal, 21nov03
+\def\entry{%
+ \begingroup
+ %
+ % Start a new paragraph if necessary, so our assignments below can't
+ % affect previous text.
+ \par
+ %
+ % Do not fill out the last line with white space.
+ \parfillskip = 0in
+ %
+ % No extra space above this paragraph.
+ \parskip = 0in
+ %
+ % Do not prefer a separate line ending with a hyphen to fewer lines.
+ \finalhyphendemerits = 0
+ %
+ % \hangindent is only relevant when the entry text and page number
+ % don't both fit on one line. In that case, bob suggests starting the
+ % dots pretty far over on the line. Unfortunately, a large
+ % indentation looks wrong when the entry text itself is broken across
+ % lines. So we use a small indentation and put up with long leaders.
+ %
+ % \hangafter is reset to 1 (which is the value we want) at the start
+ % of each paragraph, so we need not do anything with that.
+ \hangindent = 2em
+ %
+ % When the entry text needs to be broken, just fill out the first line
+ % with blank space.
+ \rightskip = 0pt plus1fil
+ %
+ % A bit of stretch before each entry for the benefit of balancing
+ % columns.
+ \vskip 0pt plus1pt
+ %
+ % Swallow the left brace of the text (first parameter):
+ \afterassignment\doentry
+ \let\temp =
+}
+\def\doentry{%
+ \bgroup % Instead of the swallowed brace.
+ \noindent
+ \aftergroup\finishentry
+ % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+ % #1 is the page number.
+ %
+ % The following is kludged to not output a line of dots in the index if
+ % there are no page numbers. The next person who breaks this will be
+ % cursed by a Unix daemon.
+ \def\tempa{{\rm }}%
+ \def\tempb{#1}%
+ \edef\tempc{\tempa}%
+ \edef\tempd{\tempb}%
+ \ifx\tempc\tempd
+ \ %
+ \else
+ %
+ % If we must, put the page number on a line of its own, and fill out
+ % this line with blank space. (The \hfil is overwhelmed with the
+ % fill leaders glue in \indexdotfill if the page number does fit.)
+ \hfil\penalty50
+ \null\nobreak\indexdotfill % Have leaders before the page number.
+ %
+ % The `\ ' here is removed by the implicit \unskip that TeX does as
+ % part of (the primitive) \par. Without it, a spurious underfull
+ % \hbox ensues.
+ \ifpdf
+ \pdfgettoks#1.%
+ \ \the\toksA
+ \else
+ \ #1%
+ \fi
+ \fi
+ \par
+ \endgroup
+}
-\outer\def\entry #1#2{
-{\parfillskip=0in \parskip=0in \parindent=0in
-\hangindent=1in \hangafter=1%
-\noindent\hbox{#1}\leaders\Dotsbox\hskip 0pt plus 1filll #2\par
-}}
+% Like \dotfill except takes at least 1 em.
+\def\indexdotfill{\cleaders
+ \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
\def\primary #1{\line{#1\hfil}}
\newskip\secondaryindent \secondaryindent=0.5cm
-
-\def\secondary #1#2{
-{\parfillskip=0in \parskip=0in
-\hangindent =1in \hangafter=1
-\noindent\hskip\secondaryindent\hbox{#1}\leaders\Dotsbox\hskip 0pt plus 1filll#2\par
+\def\secondary#1#2{{%
+ \parfillskip=0in
+ \parskip=0in
+ \hangindent=1in
+ \hangafter=1
+ \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+ \else
+ #2
+ \fi
+ \par
}}
-%% Define two-column mode, which is used in indexes.
-%% Adapted from the TeXBook, page 416
-\catcode `\@=11
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+ % Grab any single-column material above us.
+ \output = {%
+ %
+ % Here is a possibility not foreseen in manmac: if we accumulate a
+ % whole lot of material, we might end up calling this \output
+ % routine twice in a row (see the doublecol-lose test, which is
+ % essentially a couple of indexes with @setchapternewpage off). In
+ % that case we just ship out what is in \partialpage with the normal
+ % output routine. Generally, \partialpage will be empty when this
+ % runs and this will be a no-op. See the indexspread.tex test case.
+ \ifvoid\partialpage \else
+ \onepageout{\pagecontents\partialpage}%
+ \fi
+ %
+ \global\setbox\partialpage = \vbox{%
+ % Unvbox the main output page.
+ \unvbox\PAGE
+ \kern-\topskip \kern\baselineskip
+ }%
+ }%
+ \eject % run that output routine to set \partialpage
+ %
+ % Use the double-column output routine for subsequent pages.
+ \output = {\doublecolumnout}%
+ %
+ % Change the page size parameters. We could do this once outside this
+ % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+ % format, but then we repeat the same computation. Repeating a couple
+ % of assignments once per index is clearly meaningless for the
+ % execution time, so we may as well do it in one place.
+ %
+ % First we halve the line length, less a little for the gutter between
+ % the columns. We compute the gutter based on the line length, so it
+ % changes automatically with the paper format. The magic constant
+ % below is chosen so that the gutter has the same value (well, +-<1pt)
+ % as it did when we hard-coded it.
+ %
+ % We put the result in a separate register, \doublecolumhsize, so we
+ % can restore it in \pagesofar, after \hsize itself has (potentially)
+ % been clobbered.
+ %
+ \doublecolumnhsize = \hsize
+ \advance\doublecolumnhsize by -.04154\hsize
+ \divide\doublecolumnhsize by 2
+ \hsize = \doublecolumnhsize
+ %
+ % Double the \vsize as well. (We don't need a separate register here,
+ % since nobody clobbers \vsize.)
+ \vsize = 2\vsize
+}
-\newdimen\doublecolumnhsize \doublecolumnhsize = 3.11in
-\newdimen\doublecolumnvsize \doublecolumnvsize = 19.1in
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+ \splittopskip=\topskip \splitmaxdepth=\maxdepth
+ % Get the available space for the double columns -- the normal
+ % (undoubled) page height minus any material left over from the
+ % previous page.
+ \dimen@ = \vsize
+ \divide\dimen@ by 2
+ \advance\dimen@ by -\ht\partialpage
+ %
+ % box0 will be the left-hand column, box2 the right.
+ \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+ \onepageout\pagesofar
+ \unvbox255
+ \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+ \unvbox\partialpage
+ %
+ \hsize = \doublecolumnhsize
+ \wd0=\hsize \wd2=\hsize
+ \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+ \output = {%
+ % Split the last of the double-column material. Leave it on the
+ % current page, no automatic page break.
+ \balancecolumns
+ %
+ % If we end up splitting too much material for the current page,
+ % though, there will be another page break right after this \output
+ % invocation ends. Having called \balancecolumns once, we do not
+ % want to call it again. Therefore, reset \output to its normal
+ % definition right away. (We hope \balancecolumns will never be
+ % called on to balance too much material, but if it is, this makes
+ % the output somewhat more palatable.)
+ \global\output = {\onepageout{\pagecontents\PAGE}}%
+ }%
+ \eject
+ \endgroup % started in \begindoublecolumns
+ %
+ % \pagegoal was set to the doubled \vsize above, since we restarted
+ % the current page. We're now back to normal single-column
+ % typesetting, so reset \pagegoal to the normal \vsize (after the
+ % \endgroup where \vsize got restored).
+ \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+ \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+ \dimen@ = \ht0
+ \advance\dimen@ by \topskip
+ \advance\dimen@ by-\baselineskip
+ \divide\dimen@ by 2 % target to split to
+ %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+ \splittopskip = \topskip
+ % Loop until we get a decent breakpoint.
+ {%
+ \vbadness = 10000
+ \loop
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@
+ \ifdim\ht3>\dimen@
+ \global\advance\dimen@ by 1pt
+ \repeat
+ }%
+ %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ %
+ \pagesofar
+}
+\catcode`\@ = \other
-\def\begindoublecolumns{\begingroup
- \output={\global\setbox\partialpage=\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}\eject
- \output={\doublecolumnout} \hsize=\doublecolumnhsize \vsize=\doublecolumnvsize}
-\def\enddoublecolumns{\output={\balancecolumns}\eject
- \endgroup \pagegoal=\vsize}
-\def\doublecolumnout{\splittopskip=\topskip \splitmaxdepth=\maxdepth
- \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar \unvbox255 \penalty\outputpenalty}
-\def\pagesofar{\unvbox\partialpage %
- \hsize=\doublecolumnhsize % have to restore this since output routine
-% changes it to set cropmarks (P. A. MacKay, 12 Nov. 1986)
- \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
-\def\balancecolumns{\setbox0=\vbox{\unvbox255} \dimen@=\ht0
- \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
- \divide\dimen@ by2 \splittopskip=\topskip
- {\vbadness=10000 \loop \global\setbox3=\copy0
- \global\setbox1=\vsplit3 to\dimen@
- \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat}
- \setbox0=\vbox to\dimen@{\unvbox1} \setbox2=\vbox to\dimen@{\unvbox3}
- \pagesofar}
-
-\catcode `\@=\other
\message{sectioning,}
-% Define chapters, sections, etc.
-
-\newcount \chapno
-\newcount \secno
-\newcount \subsecno
-\newcount \subsubsecno
+% Chapters, sections, etc.
+
+% \unnumberedno is an oxymoron, of course. But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number". We avoid collisions with chapter
+% numbers by starting them at 10000. (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno \secno=0
+\newcount\subsecno \subsecno=0
+\newcount\subsubsecno \subsubsecno=0
% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount \appendixno \appendixno = `\@
-\def\appendixletter{\char\the\appendixno}
-
-\newwrite \contentsfile
-\openout \contentsfile = \jobname.toc
+\newcount\appendixno \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+ \ifnum\appendixno=`A A%
+ \else\ifnum\appendixno=`B B%
+ \else\ifnum\appendixno=`C C%
+ \else\ifnum\appendixno=`D D%
+ \else\ifnum\appendixno=`E E%
+ \else\ifnum\appendixno=`F F%
+ \else\ifnum\appendixno=`G G%
+ \else\ifnum\appendixno=`H H%
+ \else\ifnum\appendixno=`I I%
+ \else\ifnum\appendixno=`J J%
+ \else\ifnum\appendixno=`K K%
+ \else\ifnum\appendixno=`L L%
+ \else\ifnum\appendixno=`M M%
+ \else\ifnum\appendixno=`N N%
+ \else\ifnum\appendixno=`O O%
+ \else\ifnum\appendixno=`P P%
+ \else\ifnum\appendixno=`Q Q%
+ \else\ifnum\appendixno=`R R%
+ \else\ifnum\appendixno=`S S%
+ \else\ifnum\appendixno=`T T%
+ \else\ifnum\appendixno=`U U%
+ \else\ifnum\appendixno=`V V%
+ \else\ifnum\appendixno=`W W%
+ \else\ifnum\appendixno=`X X%
+ \else\ifnum\appendixno=`Y Y%
+ \else\ifnum\appendixno=`Z Z%
+ % The \the is necessary, despite appearances, because \appendixletter is
+ % expanded while writing the .toc file. \char\appendixno is not
+ % expandable, thus it is written literally, thus all appendixes come out
+ % with the same letter (or @) in the toc without it.
+ \else\char\the\appendixno
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise
-
-\def\thischapter{} \def\thissection{}
-\def\seccheck#1{\if \pageno<0 %
-\errmessage{@#1 not allowed after generating table of contents}\fi
-%
-}
-
-\outer\def\chapter{\parsearg\chapterzzz}
-\def\chapterzzz #1{\seccheck{chapter}%
-\secno=0 \subsecno=0 \subsubsecno=0 \global\advance \chapno by 1 \message{Chapter \the\chapno}%
-\chapmacro {#1}{\the\chapno}%
-\gdef\thissection{#1}\gdef\thischapter{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-}
-
-\outer\def\appendix{\parsearg\appendixzzz}
-\def\appendixzzz #1{\seccheck{appendix}%
-\secno=0 \subsecno=0 \subsubsecno=0 \global\advance \appendixno by 1 \message{Appendix \appendixletter}%
-\chapmacro {#1}{Appendix \appendixletter}%
-\gdef\thischapter{#1}\gdef\thissection{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash chapentry {#1}{Appendix \appendixletter}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-}
-
-\outer\def\unnumbered{\parsearg\unnumberedzzz}
-\def\unnumberedzzz #1{\seccheck{unnumbered}%
-\secno=0 \subsecno=0 \subsubsecno=0 \message{(#1)}
-\unnumbchapmacro {#1}%
-\gdef\thischapter{#1}\gdef\thissection{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-}
-
-\outer\def\section{\parsearg\sectionzzz}
-\def\sectionzzz #1{\seccheck{section}%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash secentry %
-{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}
-
-\outer\def\appendixsection{\parsearg\appendixsectionzzz}
-\outer\def\appendixsec{\parsearg\appendixsectionzzz}
-\def\appendixsectionzzz #1{\seccheck{appendixsection}%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash secentry %
-{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}
-
-\outer\def\unnumberedsec{\parsearg\unnumberedseczzz}
-\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}
-
-\outer\def\subsection{\parsearg\subsectionzzz}
-\def\subsectionzzz #1{\seccheck{subsection}%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash subsecentry %
-{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}
-
-\outer\def\appendixsubsec{\parsearg\appendixsubseczzz}
-\def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash subsecentry %
-{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}
-
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}
-
-\outer\def\subsubsection{\parsearg\subsubsectionzzz}
-\def\subsubsectionzzz #1{\seccheck{subsubsection}%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash subsubsecentry %
-{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%\
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}
-
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubseczzz}
-\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash subsubsecentry{#1}%
-{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%\
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}
-
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
+% page headings and footings can use it. @section does likewise.
+% However, they are not reliable, because we don't use marks.
+\def\thischapter{}
+\def\thissection{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achive this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unmlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+ % Compute the abs. sec. level:
+ \absseclevel=#2
+ \advance\absseclevel by \secbase
+ % Make sure \absseclevel doesn't fall outside the range:
+ \ifnum \absseclevel < 0
+ \absseclevel = 0
+ \else
+ \ifnum \absseclevel > 3
+ \absseclevel = 3
+ \fi
+ \fi
+ % The heading type:
+ \def\headtype{#1}%
+ \if \headtype U%
+ \ifnum \absseclevel < \unmlevel
+ \chardef\unmlevel = \absseclevel
+ \fi
+ \else
+ % Check for appendix sections:
+ \ifnum \absseclevel = 0
+ \edef\chapheadtype{\headtype}%
+ \else
+ \if \headtype A\if \chapheadtype N%
+ \errmessage{@appendix... within a non-appendix chapter}%
+ \fi\fi
+ \fi
+ % Check for numbered within unnumbered:
+ \ifnum \absseclevel > \unmlevel
+ \def\headtype{U}%
+ \else
+ \chardef\unmlevel = 3
+ \fi
+ \fi
+ % Now print the heading:
+ \if \headtype U%
+ \ifcase\absseclevel
+ \unnumberedzzz{#3}%
+ \or \unnumberedseczzz{#3}%
+ \or \unnumberedsubseczzz{#3}%
+ \or \unnumberedsubsubseczzz{#3}%
+ \fi
+ \else
+ \if \headtype A%
+ \ifcase\absseclevel
+ \appendixzzz{#3}%
+ \or \appendixsectionzzz{#3}%
+ \or \appendixsubseczzz{#3}%
+ \or \appendixsubsubseczzz{#3}%
+ \fi
+ \else
+ \ifcase\absseclevel
+ \chapterzzz{#3}%
+ \or \seczzz{#3}%
+ \or \numberedsubseczzz{#3}%
+ \or \numberedsubsubseczzz{#3}%
+ \fi
+ \fi
+ \fi
+ \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered. Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v. By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+ % section resetting is \global in case the chapter is in a group, such
+ % as an @include file.
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\chapno by 1
+ %
+ % Used for \float.
+ \gdef\chaplevelprefix{\the\chapno.}%
+ \resetallfloatnos
+ %
+ \message{\putwordChapter\space \the\chapno}%
+ %
+ % Write the actual heading.
+ \chapmacro{#1}{Ynumbered}{\the\chapno}%
+ %
+ % So @section and the like are numbered underneath this chapter.
+ \global\let\section = \numberedsec
+ \global\let\subsection = \numberedsubsec
+ \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz#1{%
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\appendixno by 1
+ \gdef\chaplevelprefix{\appendixletter.}%
+ \resetallfloatnos
+ %
+ \def\appendixnum{\putwordAppendix\space \appendixletter}%
+ \message{\appendixnum}%
+ %
+ \chapmacro{#1}{Yappendix}{\appendixletter}%
+ %
+ \global\let\section = \appendixsec
+ \global\let\subsection = \appendixsubsec
+ \global\let\subsubsection = \appendixsubsubsec
+}
+
+\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz#1{%
+ \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+ \global\advance\unnumberedno by 1
+ %
+ % Since an unnumbered has no number, no prefix for figures.
+ \global\let\chaplevelprefix = \empty
+ \resetallfloatnos
+ %
+ % This used to be simply \message{#1}, but TeX fully expands the
+ % argument to \message. Therefore, if #1 contained @-commands, TeX
+ % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
+ % expanded @cite (which turns out to cause errors because \cite is meant
+ % to be executed, not expanded).
+ %
+ % Anyway, we don't want the fully-expanded definition of @cite to appear
+ % as a result of the \message, we just want `@cite' itself. We use
+ % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+ % simply yielding the contents of <toks register>. (We also do this for
+ % the toc entries.)
+ \toks0 = {#1}%
+ \message{(\the\toks0)}%
+ %
+ \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+ %
+ \global\let\section = \unnumberedsec
+ \global\let\subsection = \unnumberedsubsec
+ \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+ % Well, we could do the following in a group, but that would break
+ % an assumption that \chapmacro is called at the outermost level.
+ % Thus we are safer this way: --kasal, 24feb04
+ \let\centerparametersmaybe = \centerparameters
+ \unnmhead0{#1}%
+ \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz#1{%
+ \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
+ \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz#1{%
+ \global\subsubsecno=0 \global\advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynumbered}%
+ {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz#1{%
+ \global\advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
}
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
% Define @majorheading, @heading and @subheading
-\outer\def\majorheading #1{%
-{\advance\chapheadingskip by 10pt \chapbreak }%
-{\chapfonts \line{\chaprm #1\hfill}}\bigskip \par\penalty 200}
+% NOTE on use of \vbox for chapter headings, section headings, and such:
+% 1) We use \vbox rather than the earlier \line to permit
+% overlong headings to fold.
+% 2) \hyphenpenalty is set to 10000 because hyphenation in a
+% heading is obnoxious; this forbids it.
+% 3) Likewise, headings look best if no \parindent is used, and
+% if justification is not attempted. Hence \raggedright.
+
+
+\def\majorheading{%
+ {\advance\chapheadingskip by 10pt \chapbreak }%
+ \parsearg\chapheadingzzz
+}
-\outer\def\chapheading #1{\chapbreak %
-{\chapfonts \line{\chaprm #1\hfill}}\bigskip \par\penalty 200}
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+ {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}%
+ \bigskip \par\penalty 200\relax
+ \suppressfirstparagraphindent
+}
-\let\heading=\secheadingi
-\let\subheading=\subsecheadingi
-\let\subsubheading=\subsubsecheadingi
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
% These macros generate a chapter, section, etc. heading only
% (including whitespace, linebreaking, etc. around it),
%%% Args are the skip and penalty (usually negative)
\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
-\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
+\newskip\chapheadingskip
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-\def\CHAPPAGoff{
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chapbreak
\global\let\pagealignmacro=\chappager}
-\def\CHAPPAGon{
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager}
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
-\def\CHAPPAGodd{
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage}
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+ \pchapsepmacro
+ {%
+ \chapfonts \rm
+ %
+ % Have to define \thissection before calling \donoderef, because the
+ % xref code eventually uses it. On the other hand, it has to be called
+ % after \pchapsepmacro, or the headline will change too soon.
+ \gdef\thissection{#1}%
+ \gdef\thischaptername{#1}%
+ %
+ % Only insert the separating space if we have a chapter/appendix
+ % number, and don't print the unnumbered ``number''.
+ \def\temptype{#2}%
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unnchap}%
+ \gdef\thischapter{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+ \def\toctype{omit}%
+ \gdef\thischapter{}%
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+ \def\toctype{app}%
+ % We don't substitute the actual chapter name into \thischapter
+ % because we don't want its macros evaluated now. And we don't
+ % use \thissection because that changes with each section.
+ %
+ \xdef\thischapter{\putwordAppendix{} \appendixletter:
+ \noexpand\thischaptername}%
+ \else
+ \setbox0 = \hbox{#3\enspace}%
+ \def\toctype{numchap}%
+ \xdef\thischapter{\putwordChapter{} \the\chapno:
+ \noexpand\thischaptername}%
+ \fi\fi\fi
+ %
+ % Write the toc entry for this chapter. Must come before the
+ % \donoderef, because we include the current node name in the toc
+ % entry, and \donoderef resets it to empty.
+ \writetocentry{\toctype}{#1}{#3}%
+ %
+ % For pdftex, we have to write out the node definition (aka, make
+ % the pdfdest) after any page break, but before the actual text has
+ % been typeset. If the destination for the pdf outline is after the
+ % text, then jumping from the outline may wind up with the text not
+ % being visible, for instance under high magnification.
+ \donoderef{#2}%
+ %
+ % Typeset the actual heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 \centerparametersmaybe
+ \unhbox0 #1\par}%
+ }%
+ \nobreak\bigskip % no page break after a chapter title
+ \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}\bigskip \par\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt
+ \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+}
+\def\CHAPFopen{%
+ \global\let\chapmacro=\chfopen
+ \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles. These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\sectionheading#1#2#3#4{%
+ {%
+ % Switch to the right set of fonts.
+ \csname #2fonts\endcsname \rm
+ %
+ % Insert space above the heading.
+ \csname #2headingbreak\endcsname
+ %
+ % Only insert the space after the number if we have a section number.
+ \def\sectionlevel{#2}%
+ \def\temptype{#3}%
+ %
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unn}%
+ \gdef\thissection{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ % for @headings -- no section number, don't include in toc,
+ % and don't redefine \thissection.
+ \setbox0 = \hbox{}%
+ \def\toctype{omit}%
+ \let\sectionlevel=\empty
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{app}%
+ \gdef\thissection{#1}%
+ \else
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{num}%
+ \gdef\thissection{#1}%
+ \fi\fi\fi
+ %
+ % Write the toc entry (before \donoderef). See comments in \chapmacro.
+ \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+ %
+ % Write the node reference (= pdf destination for pdftex).
+ % Again, see comments in \chapmacro.
+ \donoderef{#3}%
+ %
+ % Interline glue will be inserted when the vbox is completed.
+ % That glue will be a valid breakpoint for the page, since it'll be
+ % preceded by a whatsit (usually from the \donoderef, or from the
+ % \writetocentry if there was no node). We don't want to allow that
+ % break, since then the whatsits could end up on page n while the
+ % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000.
+ \nobreak
+ %
+ % Output the actual section heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 % zero if no section number
+ \unhbox0 #1}%
+ }%
+ % Add extra space after the heading -- half of whatever came above it.
+ % Don't allow stretch, though.
+ \kern .5 \csname #2headingskip\endcsname
+ %
+ % Do not let the kern be a potential breakpoint, as it would be if it
+ % was followed by glue.
+ \nobreak
+ %
+ % We'll almost certainly start a paragraph next, so don't let that
+ % glue accumulate. (Not a breakpoint because it's preceded by a
+ % discardable item.)
+ \vskip-\parskip
+ %
+ % This is purely so the last item on the list is a known \penalty >
+ % 10000. This is so \startdefun can avoid allowing breakpoints after
+ % section headings. Otherwise, it would insert a valid breakpoint between:
+ %
+ % @section sec-whatever
+ % @deffn def-whatever
+ \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this. The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything. This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+ \edef\writetoctype{#1}%
+ \ifx\writetoctype\omitkeyword \else
+ \iftocfileopened\else
+ \immediate\openout\tocfile = \jobname.toc
+ \global\tocfileopenedtrue
+ \fi
+ %
+ \iflinks
+ {\atdummies
+ \edef\temp{%
+ \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+ \temp
+ }%
+ \fi
+ \fi
+ %
+ % Tell \shipout to create a pdf destination on each page, if we're
+ % writing pdf. These are used in the table of contents. We can't
+ % just write one on every page because the title pages are numbered
+ % 1 and 2 (the page numbers aren't printed), and so are the first
+ % two pages of the document. Thus, we'd have two destinations named
+ % `1', and two named `2'.
+ \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care. This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+ \catcode`\"=\active
+ \catcode`\$=\active
+ \catcode`\<=\active
+ \catcode`\>=\active
+ \catcode`\\=\active
+ \catcode`\^=\active
+ \catcode`\_=\active
+ \catcode`\|=\active
+ \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+ \setupdatafile
+ \activecatcodes
+ \input \jobname.toc
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+ % If @setchapternewpage on, and @headings double, the contents should
+ % start on an odd page, unlike chapters. Thus, we maintain
+ % \contentsalignmacro in parallel with \pagealignmacro.
+ % From: Torbjorn Granlund <tege@matematik.su.se>
+ \contentsalignmacro
+ \immediate\closeout\tocfile
+ %
+ % Don't need to put `Contents' or `Short Contents' in the headline.
+ % It is abundantly clear what they are.
+ \def\thischapter{}%
+ \chapmacro{#1}{Yomitfromtoc}{}%
+ %
+ \savepageno = \pageno
+ \begingroup % Set up to handle contents files properly.
+ \raggedbottom % Worry more about breakpoints than the bottom.
+ \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ %
+ % Roman numerals for page numbers.
+ \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+
+% Normal (long) toc.
+\def\contents{%
+ \startcontents{\putwordTOC}%
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \readtocfile
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \ifeof 1 \else
+ \pdfmakeoutlines
+ \fi
+ \closein 1
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+ \startcontents{\putwordShortTOC}%
+ %
+ \let\numchapentry = \shortchapentry
+ \let\appentry = \shortchapentry
+ \let\unnchapentry = \shortunnchapentry
+ % We want a true roman here for the page numbers.
+ \secfonts
+ \let\rm=\shortcontrm \let\bf=\shortcontbf
+ \let\sl=\shortcontsl \let\tt=\shortconttt
+ \rm
+ \hyphenpenalty = 10000
+ \advance\baselineskip by 1pt % Open it up a little.
+ \def\numsecentry##1##2##3##4{}
+ \let\appsecentry = \numsecentry
+ \let\unnsecentry = \numsecentry
+ \let\numsubsecentry = \numsecentry
+ \let\appsubsecentry = \numsecentry
+ \let\unnsubsecentry = \numsecentry
+ \let\numsubsubsecentry = \numsecentry
+ \let\appsubsubsecentry = \numsecentry
+ \let\unnsubsubsecentry = \numsecentry
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \readtocfile
+ \fi
+ \closein 1
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \endgroup
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+ % This space should be enough, since a single number is .5em, and the
+ % widest letter (M) is 1em, at least in the Computer Modern fonts.
+ % But use \hss just in case.
+ % (This space doesn't include the extra space that gets added after
+ % the label; that gets put in by \shortchapentry above.)
+ %
+ % We'd like to right-justify chapter numbers, but that looks strange
+ % with appendix letters. And right-justifying numbers and
+ % left-justifying letters looks strange when there is less than 10
+ % chapters. Have to read the whole toc once to know how many chapters
+ % there are before deciding ...
+ \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+ % We use M since it's probably the widest letter.
+ \setbox0 = \hbox{\putwordAppendix{} M}%
+ \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+ \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+ \begingroup
+ \chapentryfonts
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+ \endgroup
+ \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+ \secentryfonts \leftskip=\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+ \subsecentryfonts \leftskip=2\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+ \subsubsecentryfonts \leftskip=3\tocindent
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, it should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+ \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+ \advance\hsize by -2\dimen2 % Rules.
+ \vbox{%
+ \hrule height\dimen2
+ \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
+ \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+ \kern3pt\vrule width\dimen2}% Space to right.
+ \hrule height\dimen2}
+ \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @tex ... @end tex escapes into raw Tex temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain tex @ character.
+
+\envdef\tex{%
+ \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+ \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+ \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+ \catcode `\%=14
+ \catcode `\+=\other
+ \catcode `\"=\other
+ \catcode `\|=\other
+ \catcode `\<=\other
+ \catcode `\>=\other
+ \escapechar=`\\
+ %
+ \let\b=\ptexb
+ \let\bullet=\ptexbullet
+ \let\c=\ptexc
+ \let\,=\ptexcomma
+ \let\.=\ptexdot
+ \let\dots=\ptexdots
+ \let\equiv=\ptexequiv
+ \let\!=\ptexexclam
+ \let\i=\ptexi
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
+ \let\{=\ptexlbrace
+ \let\+=\tabalign
+ \let\}=\ptexrbrace
+ \let\/=\ptexslash
+ \let\*=\ptexstar
+ \let\t=\ptext
+ \let\frenchspacing=\plainfrenchspacing
+ %
+ \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+ \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+ \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments. \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical. We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+ % =10000 instead of <10000 because of a special case in \itemzzz and
+ % \sectionheading, q.v.
+ \ifnum \lastpenalty=10000 \else
+ \advance\envskipamount by \parskip
+ \endgraf
+ \ifdim\lastskip<\envskipamount
+ \removelastskip
+ % it's not a good place to break if the last penalty was \nobreak
+ % or better ...
+ \ifnum\lastpenalty<10000 \penalty-50 \fi
+ \vskip\envskipamount
+ \fi
+ \fi
+}}
-\CHAPPAGon
+\let\afterenvbreak = \aboveenvbreak
-\def\CHAPFplain{
-\global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain}
+% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
-\def\chfplain #1#2{%
-\pchapsepmacro %
-{\chapfonts \line{\chaprm #2.\enspace #1\hfill}}\bigskip \par\penalty 5000 %
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+ \ctl\leaders\hrule height\circthick\hfil\ctr
+ \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+ \cbl\leaders\hrule height\circthick\hfil\cbr
+ \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+ \ifhmode\par\fi % can't be in the midst of a paragraph.
+ \startsavinginserts
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt % we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+ % side, and for 6pt waste from
+ % each corner char, and rule thickness
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing = t%
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \kern3pt
+ \hsize=\cartinner
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
+ \comment % For explanation, see the end of \def\group.
+}
+\def\Ecartouche{%
+ \ifhmode\par\fi
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
+ \checkinserts
}
-\def\unnchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \line{\chaprm #1\hfill}}\bigskip \par\penalty 10000 %
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\def\nonfillstart{%
+ \aboveenvbreak
+ \hfuzz = 12pt % Don't be fussy
+ \sepspaces % Make spaces be word-separators rather than space tokens.
+ \let\par = \lisppar % don't ignore blank lines
+ \obeylines % each line of input is a line of output
+ \parskip = 0pt
+ \parindent = 0pt
+ \emergencystretch = 0pt % don't try to avoid overfull boxes
+ \ifx\nonarrowing\relax
+ \advance \leftskip by \lispnarrowing
+ \exdentamount=\lispnarrowing
+ \else
+ \let\nonarrowing = \relax
+ \fi
+ \let\exdent=\nofillexdent
}
-\CHAPFplain % The default
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \line{\chaprm #1\hfill}}\bigskip \par\penalty 10000 %
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+% @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+ \ifx\SETdispenvsize\smallword
+ \smallexamplefonts \rm
+ \fi
+}
+\def\setsmalldispenv{%
+ \ifx\SETdispenvsize\nosmallword
+ \else
+ \smallexamplefonts \rm
+ \fi
}
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
+% We often define two environments, @foo and @smallfoo.
+% Let's do it by one command:
+\def\makedispenv #1#2{
+ \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}
+ \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}
+ \expandafter\let\csname E#1\endcsname \afterenvbreak
+ \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
}
-\def\CHAPFopen{
-\global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen}
+% Define two synonyms:
+\def\maketwodispenvs #1#2#3{
+ \makedispenv{#1}{#3}
+ \makedispenv{#2}{#3}
+}
-% Parameter controlling skip before section headings.
+% @lisp: indented, narrowed, typewriter font; @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvs {lisp}{example}{%
+ \nonfillstart
+ \tt
+ \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+ \gobble % eat return
+}
-\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenv {display}{%
+ \nonfillstart
+ \gobble
+}
-\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt
-\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenv{format}{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \gobble
+}
-\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}}
-\def\plainsecheading #1{\secheadingi {#1}}
-\def\secheadingi #1{{\advance \secheadingskip by \parskip %
-\secheadingbreak}%
-{\secfonts \line{\secrm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \gobble
+}
+\let\Eflushleft = \afterenvbreak
-\def\subsecheading #1#2#3#4{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\secfonts \line{\secrm#2.#3.#4\enspace #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
+% @flushright.
+%
+\envdef\flushright{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ \advance\leftskip by 0pt plus 1fill
+ \gobble
+}
+\let\Eflushright = \afterenvbreak
-\def\subsubsecfonts{\subsecfonts} % Maybe this should change
-\def\subsubsecheading #1#2#3#4#5{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\secfonts \line{\secrm#2.#3.#4.#5\enspace #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000}
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins. We keep \parskip nonzero in general, since
+% we're doing normal filling. So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\envdef\quotation{%
+ {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+ \parindent=0pt
+ %
+ % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+ \ifx\nonarrowing\relax
+ \advance\leftskip by \lispnarrowing
+ \advance\rightskip by \lispnarrowing
+ \exdentamount = \lispnarrowing
+ \else
+ \let\nonarrowing = \relax
+ \fi
+ \parsearg\quotationlabel
+}
-\message{toc printing,}
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+ \par
+ \ifx\quotationauthor\undefined\else
+ % indent a bit.
+ \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+ \fi
+ {\parskip=0pt \afterenvbreak}%
+}
-\def\Dotsbox{\hbox to 1em{\hss.\hss}} % Used by index macros
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+ \def\temp{#1}%
+ \ifx\temp\empty \else
+ {\bf #1: }%
+ \fi
+}
-\def\finishcontents{%
-\ifnum\pageno>0 %
-\pagealignmacro %
-\immediate\closeout \contentsfile%
-\pageno=-1 % Request roman numbered pages
-\fi}
-\outer\def\contents{%
-\finishcontents %
-\unnumbchapmacro{Table of Contents}
-\def\thischapter{Table of Contents}
-{\catcode`\\=0
-\catcode`\{=1 % Set up to handle contents files properly
-\catcode`\}=2
-\catcode`\@=11
-\input \jobname.toc
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too. Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+ \do\ \do\\\do\{\do\}\do\$\do\&%
+ \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+ \do\<\do\>\do\|\do\@\do+\do\"%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+ \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% [Knuth] pp. 380,381,391
+% Disable Spanish ligatures ?` and !` of \tt font
+\begingroup
+ \catcode`\`=\active\gdef`{\relax\lq}
+\endgroup
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+ \tt % easiest (and conventionally used) font for verbatim
+ \def\par{\leavevmode\endgraf}%
+ \catcode`\`=\active
+ \tabeightspaces
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
}
-\vfill \eject}
-\outer\def\summarycontents{%
-\finishcontents %
-\unnumbchapmacro{Summary Table of Contents}
-\def\thischapter{Summary Table of Contents}
-{\catcode`\\=0
-\catcode`\{=1 % Set up to handle contents files properly
-\catcode`\}=2
-\catcode`\@=11
-\def\smallbreak{}
-\def\secentry ##1##2##3##4{}
-\def\subsecentry ##1##2##3##4##5{}
-\def\subsubsecentry ##1##2##3##4##5##6{}
-\def\unnumbsecentry ##1##2{}
-\def\unnumbsubsecentry ##1##2{}
-\def\unnumbsubsubsecentry ##1##2{}
-\let\medbreak=\smallbreak
-\input \jobname.toc
-}
-\vfill \eject}
+% Setup for the @verbatim environment
+%
+% Real tab expansion
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+\def\starttabbox{\setbox0=\hbox\bgroup}
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabexpand{%
+ \catcode`\^^I=\active
+ \def^^I{\leavevmode\egroup
+ \dimen0=\wd0 % the width so far, or since the previous tab
+ \divide\dimen0 by\tabw
+ \multiply\dimen0 by\tabw % compute previous multiple of \tabw
+ \advance\dimen0 by\tabw % advance to next multiple of \tabw
+ \wd0=\dimen0 \box0 \starttabbox
+ }%
+ }
+\endgroup
+\def\setupverbatim{%
+ \let\nonarrowing = t%
+ \nonfillstart
+ % Easiest (and conventionally used) font for verbatim
+ \tt
+ \def\par{\leavevmode\egroup\box0\endgraf}%
+ \catcode`\`=\active
+ \tabexpand
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
+ \everypar{\starttabbox}%
+}
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters. Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+% \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+ \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+ \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+% \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+ \catcode`\ =\active
+ \obeylines %
+ % ignore everything up to the first ^^M, that's the newline at the end
+ % of the @verbatim input line itself. Otherwise we get an extra blank
+ % line in the output.
+ \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+ % We really want {...\end verbatim} in the body of the macro, but
+ % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+ \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
-% These macros generate individual entries in the table of contents
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-\def\chapentry #1#2#3{%
-\medbreak
-\line{#2.\space#1\leaders\hbox to 1em{\hss.\hss}\hfill #3}
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+ {%
+ \makevalueexpandable
+ \setupverbatim
+ \input #1
+ \afterenvbreak
+ }%
}
-\def\unnumbchapentry #1#2{%
-\medbreak
-\line{#1\leaders\Dotsbox\hfill #2}
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+ \begingroup
+ \parindent = 0pt % paragraph indentation looks wrong on title page
+ \scanexp\copyingtext
+ \endgroup
}
-\def\secentry #1#2#3#4{%
-\line{\enspace\enspace#2.#3\space#1\leaders\Dotsbox\hfill#4}
-}
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
-\def\unnumbsecentry #1#2{%
-\line{\enspace\enspace#1\leaders\Dotsbox\hfill #2}
+% Start the processing of @deffn:
+\def\startdefun{%
+ \ifnum\lastpenalty<10000
+ \medbreak
+ \else
+ % If there are two @def commands in a row, we'll have a \nobreak,
+ % which is there to keep the function description together with its
+ % header. But if there's nothing but headers, we need to allow a
+ % break somewhere. Check specifically for penalty 10002, inserted
+ % by \defargscommonending, instead of 10000, since the sectioning
+ % commands also insert a nobreak penalty, and we don't want to allow
+ % a break between a section heading and a defun.
+ %
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ % Similarly, after a section heading, do not allow a break.
+ % But do insert the glue.
+ \medskip % preceded by discardable penalty, so not a breakpoint
+ \fi
+ %
+ \parindent=0in
+ \advance\leftskip by \defbodyindent
+ \exdentamount=\defbodyindent
}
-\def\subsecentry #1#2#3#4#5{%
-\line{\enspace\enspace\enspace\enspace
-#2.#3.#4\space#1\leaders\Dotsbox\hfill #5}
+\def\dodefunx#1{%
+ % First, check whether we are in the right environment:
+ \checkenv#1%
+ %
+ % As above, allow line break if we have multiple x headers in a row.
+ % It's not a great place, though.
+ \ifnum\lastpenalty=10002 \penalty3000 \fi
+ %
+ % And now, it's time to reuse the body of the original defun:
+ \expandafter\gobbledefun#1%
}
+\def\gobbledefun#1\startdefun{}
-\def\unnumbsubsecentry #1#2{%
-\line{\enspace\enspace\enspace\enspace#1\leaders\Dotsbox\hfill #2}
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+ \begingroup
+ % call \deffnheader:
+ #1#2 \endheader
+ % common ending:
+ \interlinepenalty = 10000
+ \advance\rightskip by 0pt plus 1fil
+ \endgraf
+ \nobreak\vskip -\parskip
+ \penalty 10002 % signal to \startdefun and \dodefunx
+ % Some of the @defun-type tags do not enable magic parentheses,
+ % rendering the following check redundant. But we don't optimize.
+ \checkparencounts
+ \endgroup
}
-\def\subsubsecentry #1#2#3#4#5#6{%
-\line{\enspace\enspace\enspace\enspace\enspace\enspace
-#2.#3.#4.#5\space#1\leaders\Dotsbox\hfill #6}
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remainnig is to define \deffnheader.
+%
+\def\makedefun#1{%
+ \expandafter\let\csname E#1\endcsname = \Edefun
+ \edef\temp{\noexpand\domakedefun
+ \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+ \temp
}
-\def\unnumbsubsubsecentry #1#2{%
-\line{\enspace\enspace\enspace\enspace\enspace\enspace#1\leaders\Dotsbox\hfill #2}
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+ \envdef#1{%
+ \startdefun
+ \parseargusing\activeparens{\printdefunline#3}%
+ }%
+ \def#2{\dodefunx#1}%
+ \def#3%
}
-\message{environments,}
+%%% Untyped functions:
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
-\def\tex{\begingroup
-\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
-\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
-\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
-\catcode `\%=14
-\catcode`\"=12
-\catcode`\|=12
-\catcode`\<=12
-\catcode`\>=12
-\escapechar=`\\
-%
-\let\{=\ptexlbrace
-\let\}=\ptexrbrace
-\let\.=\ptexdot
-\let\*=\ptexstar
-\def\@={@}%
-\let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
-\let\L=\ptexL
-%
-\let\Etex=\endgroup}
-
-% Define @lisp ... @endlisp.
-% @lisp does a \begingroup so it can rebind things,
-% including the definition of @endlisp (which normally is erroneous).
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-% This is the definition that ^M gets inside @lisp
-% phr: changed space to \null, to avoid overfull hbox problems.
-{\obeyspaces%
-\gdef\lisppar{\null\endgraf}}
-
-% Cause \obeyspaces to make each Space cause a word-separation
-% rather than the default which is that it acts punctuation.
-% This is because space in tt font looks funny.
-{\obeyspaces %
-\gdef\sepspaces{\def {\ }}}
-
-\newskip\aboveenvskipamount \aboveenvskipamount= 0pt
-\def\aboveenvbreak{{\advance\aboveenvskipamount by \parskip
-\endgraf \ifdim\lastskip<\aboveenvskipamount
-\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}}
-
-\def\afterenvbreak{\endgraf \ifdim\lastskip<\aboveenvskipamount
-\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}
-
-\def\lisp{\aboveenvbreak\begingroup\inENV %This group ends at the end of the @lisp body
-\hfuzz=12truept % Don't be fussy
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Elisp{\endgroup\afterenvbreak}%
-\parskip=0pt \advance \rightskip by \lispnarrowing
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines \tt \rawbackslash
-\def\next##1{}\next}
-
-
-\let\example=\lisp
-\def\Eexample{\Elisp}
-
-\let\smallexample=\lisp
-\def\Esmallexample{\Elisp}
-
-% Macro for 9 pt. examples, necessary to print with 5" lines.
-% From Pavel@xerox. This is not really used unless the
-% @smallbook command is given.
-
-\def\smalllispx{\aboveenvbreak\begingroup\inENV
-% This group ends at the end of the @lisp body
-\hfuzz=12truept % Don't be fussy
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Esmalllisp{\endgroup\afterenvbreak}%
-\parskip=0pt \advance \rightskip by \lispnarrowing
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines \ninett \rawbackslash
-\def\next##1{}\next}
-
-% This is @display; same as @lisp except use roman font.
-
-\def\display{\begingroup\inENV %This group ends at the end of the @display body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% Single space lines
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Edisplay{\endgroup\afterenvbreak}%
-\parskip=0pt \advance \rightskip by \lispnarrowing
-\advance \leftskip by \lispnarrowing
-\parindent=0pt
-\let\exdent=\internalexdent
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% This is @format; same as @lisp except use roman font and don't narrow margins
-
-\def\format{\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-\singlespace %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-\let\par=\lisppar
-\def\Eformat{\endgroup\afterenvbreak}
-\parskip=0pt \parindent=0pt
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% @flushleft and @flushright
-
-\def\flushleft{\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-% This also causes @ to work when the directive name
-% is terminated by end of line.
-\let\par=\lisppar
-\def\Eflushleft{\endgroup\afterenvbreak}%
-\parskip=0pt \parindent=0pt
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-\def\flushright{\begingroup\inENV %This group ends at the end of the @format body
-\aboveenvbreak
-% Make spaces be word-separators rather than space tokens.
-\sepspaces %
-% The following causes blank lines not to be ignored
-% by adding a space to the end of each line.
-% This also causes @ to work when the directive name
-% is terminated by end of line.
-\let\par=\lisppar
-\def\Eflushright{\endgroup\afterenvbreak}%
-\parskip=0pt \parindent=0pt
-\advance \leftskip by 0pt plus 1fill
-\obeyspaces \obeylines
-\def\next##1{}\next}
-
-% @quotation - narrow the margins.
-
-\def\quotation{\begingroup\inENV %This group ends at the end of the @quotation body
-{\parskip=0pt % because we will skip by \parskip too, later
-\aboveenvbreak}%
-\singlespace
-\parindent=0pt
-\def\Equotation{\par\endgroup\afterenvbreak}%
-\advance \rightskip by \lispnarrowing
-\advance \leftskip by \lispnarrowing}
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+ % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+ \dosubind{fn}{\code{#3}}{#1}%
+ \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
-\message{defuns,}
-% Define formatter for defuns
-% First, allow user to change definition object font (\df) internally
-\def\setdeffont #1 {\csname DEF#1\endcsname}
+%%% Typed functions:
-\newskip\defbodyindent \defbodyindent=36pt
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deftypemargin \deftypemargin=12pt
-\newskip\deflastargmargin \deflastargmargin=18pt
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
-\newcount\parencount
-% define \functionparens, which makes ( and ) and & do special things.
-% \functionparens affects the group it is contained in.
-\def\activeparens{%
-\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
-\catcode`\[=\active \catcode`\]=\active}
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
-\global\advance\parencount by 1 }
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-% also in that case restore the outer-level definition of (.
-\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-\global\advance \parencount by -1 }
-% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
-\def\lbrb{{\tt\char`\[}} \def\rbrb{{\tt\char`\]}}
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
-% First, defname, which formats the header line itself.
-% #1 should be the function name.
-% #2 should be the type of definition, such as "Function".
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
-\def\defname #1#2{%
-\leftskip = 0in %
-\noindent %
-\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
-\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
-\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1 %
-% Now output arg 2 ("Function" or some such)
-% ending at \deftypemargin from the right margin,
-% but stuck inside a box of width 0 so it does not interfere with linebreaking
-\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}%
-\tolerance=10000 \hbadness=10000 % Make all lines underfull and no complaints
-{\df #1}\enskip % Generate function name
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+ \dosubind{fn}{\code{#4}}{#1}%
+ \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
}
-% Actually process the body of a definition
-% #1 should be the terminating control sequence, such as \Edefun.
-% #2 should be the "another name" control sequence, such as \defunx.
-% #3 should be the control sequence that actually processes the header,
-% such as \defunheader.
+%%% Typed variables:
-\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
-\parindent=0in \leftskip=\defbodyindent %
-\begingroup\obeylines\activeparens\spacesplit#3}
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
-\def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
-\parindent=0in \leftskip=\defbodyindent %
-\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
-% Split up #2 at the first space token.
-% call #1 with two arguments:
-% the first is all of #2 before the space token,
-% the second is all of #2 after that space token.
-% If #2 contains no space token, all of it is passed as the first arg
-% and the second is passed as empty.
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
-{\obeylines
-\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
-\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
-\ifx\relax #3%
-#1{#2}{}\else #1{#2}{#3#4}\fi}}
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+ \dosubind{vr}{\code{#4}}{#1}%
+ \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
-% So much for the things common to all kinds of definitions.
+%%% Untyped variables:
-% Define @defun.
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
-% First, define the processing that is wanted for arguments of \defun
-% Use this to expand the args and terminate the paragraph they make up
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
-\def\defunargs #1{\functionparens \sl #1%
-\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
-\interlinepenalty=10000
-\endgraf\vskip -\parskip \penalty 10000}
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
-% Do complete processing of one @defun or @defunx line already parsed.
+%%% Type:
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+ \doind{tp}{\code{#2}}%
+ \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
-% @deffn Command forward-char nchars
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+ % Get the values of \leftskip and \rightskip as they were outside the @def...
+ \advance\leftskip by -\defbodyindent
+ %
+ % How we'll format the type name. Putting it in brackets helps
+ % distinguish it from the body text that may end up on the next line
+ % just below it.
+ \def\temp{#1}%
+ \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+ %
+ % Figure out line sizes for the paragraph shape.
+ % The first line needs space for \box0; but if \rightskip is nonzero,
+ % we need only space for the part of \box0 which exceeds it:
+ \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
+ % The continuations:
+ \dimen2=\hsize \advance\dimen2 by -\defargsindent
+ % (plain.tex says that \dimen1 should be used only as global.)
+ \parshape 2 0in \dimen0 \defargsindent \dimen2
+ %
+ % Put the type name to the right margin.
+ \noindent
+ \hbox to 0pt{%
+ \hfil\box0 \kern-\hsize
+ % \hsize has to be shortened this way:
+ \kern\leftskip
+ % Intentionally do not respect \rightskip, since we need the space.
+ }%
+ %
+ % Allow all lines to be underfull without complaint:
+ \tolerance=10000 \hbadness=10000
+ \exdentamount=\defbodyindent
+ {%
+ % defun fonts. We use typewriter by default (used to be bold) because:
+ % . we're printing identifiers, they should be in tt in principle.
+ % . in languages with many accents, such as Czech or French, it's
+ % common to leave accents off identifiers. The result looks ok in
+ % tt, but exceedingly strange in rm.
+ % . we don't want -- and --- to be treated as ligatures.
+ % . this still does not fix the ?` and !` ligatures, but so far no
+ % one has made identifiers using them :).
+ \df \tt
+ \def\temp{#2}% return value type
+ \ifx\temp\empty\else \tclose{\temp} \fi
+ #3% output function name
+ }%
+ {\rm\enskip}% hskip 0.5 em of \tenrm
+ %
+ \boldbrax
+ % arguments will be output next, if any.
+}
-\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name. This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable. Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+ % use sl by default (not ttsl),
+ % tt for the names.
+ \df \sl \hyphenchar\font=0
+ %
+ % On the other hand, if an argument has two dashes (for instance), we
+ % want a way to get ttsl. Let's try @var for that.
+ \let\var=\ttslanted
+ #1%
+ \sl\hyphenchar\font=45
+}
-\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup}
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+ \catcode`\(=\active \catcode`\)=\active
+ \catcode`\[=\active \catcode`\]=\active
+ \catcode`\&=\active
+}
-% @defun == @deffn Function
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
-\def\defun{\defparsebody\Edefun\defunx\defunheader}
+% Be sure that we always have a definition for `(', etc. For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+ \activeparens
+ \global\let(=\lparen \global\let)=\rparen
+ \global\let[=\lbrack \global\let]=\rbrack
+ \global\let& = \&
-\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Function}%
-\defunargs {#2}\endgroup %
+ \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+ \gdef\magicamp{\let&=\amprm}
}
-% @defmac == @deffn Macro
-
-\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
+\newcount\parencount
-\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Macro}%
-\defunargs {#2}\endgroup %
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\ }}
+
+\def\parenfont{%
+ \ifampseen
+ % At the first level, print parens in roman,
+ % otherwise use the default font.
+ \ifnum \parencount=1 \rm \fi
+ \else
+ % The \sf parens (in \boldbrax) actually are a little bolder than
+ % the contained text. This is especially needed for [ and ] .
+ \sf
+ \fi
+}
+\def\infirstlevel#1{%
+ \ifampseen
+ \ifnum\parencount=1
+ #1%
+ \fi
+ \fi
}
+\def\bfafterword#1 {#1 \bf}
-% @defspec == @deffn Special Form
+\def\opnr{%
+ \global\advance\parencount by 1
+ {\parenfont(}%
+ \infirstlevel \bfafterword
+}
+\def\clnr{%
+ {\parenfont)}%
+ \infirstlevel \sl
+ \global\advance\parencount by -1
+}
-\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
+\newcount\brackcount
+\def\lbrb{%
+ \global\advance\brackcount by 1
+ {\bf[}%
+}
+\def\rbrb{%
+ {\bf]}%
+ \global\advance\brackcount by -1
+}
-\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Special form}%
-\defunargs {#2}\endgroup %
+\def\checkparencounts{%
+ \ifnum\parencount=0 \else \badparencount \fi
+ \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+\def\badparencount{%
+ \errmessage{Unbalanced parentheses in @def}%
+ \global\parencount=0
+}
+\def\badbrackcount{%
+ \errmessage{Unbalanced square braces in @def}%
+ \global\brackcount=0
}
-% This definition is run if you use @defunx
-% anywhere other than immediately after a @defun or @defunx.
-\def\deffnx #1 {\errmessage{@deffnx in invalid context}}
-\def\defunx #1 {\errmessage{@defunx in invalid context}}
-\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
-\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\undefined
+ \newwrite\macscribble
+ \def\scantokens#1{%
+ \toks0={#1}%
+ \immediate\openout\macscribble=\jobname.tmp
+ \immediate\write\macscribble{\the\toks0}%
+ \immediate\closeout\macscribble
+ \input \jobname.tmp
+ }
+\fi
-% @defmethod, and so on
+\def\scanmacro#1{%
+ \begingroup
+ \newlinechar`\^^M
+ \let\xeatspaces\eatspaces
+ % Undo catcode changes of \startcontents and \doprintindex
+ % When called from @insertcopying or (short)caption, we need active
+ % backslash to get it printed correctly. Previously, we had
+ % \catcode`\\=\other instead. We'll see whether a problem appears
+ % with macro expansion. --kasal, 19aug04
+ \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+ % ... and \example
+ \spaceisspace
+ %
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ %
+ % I've verified that it is necessary both for e-TeX and for ordinary TeX
+ % --kasal, 29nov03
+ \scantokens{#1\endinput}%
+ \endgroup
+}
-% @defop {Funny Method} foo-class frobnicate argument
+\def\scanexp#1{%
+ \edef\temp{\noexpand\scanmacro{#1}}%
+ \temp
+}
-\def\defop #1 {\def\defoptype{#1}%
-\defmethparsebody\Edefop\defopx\defopheader}
+\newcount\paramno % Count of parameters
+\newtoks\macname % Macro name
+\newif\ifrecursive % Is it recursive?
+
+% List of all defined macros in the form
+% \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+ \toks0 = \expandafter{\macrolist\definedummyword#1}%
+ \xdef\macrolist{\the\toks0}%
+}
-\def\defopheader #1#2#3{\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype{} on #1}%
-\defunargs {#3}\endgroup %
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+% \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+ \expandafter\let
+ \csname#1\expandafter\endcsname
+ \csname#2\endcsname
}
-% @defmethod == @defop Method
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
-\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
-\def\defmethodheader #1#2#3{\dosubind {fn}{\code{#2}}{on #1}% entry in function index
-\begingroup\defname {#2}{Operation on #1}%
-\defunargs {#3}\endgroup %
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \.
+
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+
+\def\scanctxt{%
+ \catcode`\"=\other
+ \catcode`\+=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\@=\other
+ \catcode`\^=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\~=\other
}
-% @defcv {Class Option} foo-class foo-flag
+\def\scanargctxt{%
+ \scanctxt
+ \catcode`\\=\other
+ \catcode`\^^M=\other
+}
-\def\defcv #1 {\def\defcvtype{#1}%
-\defmethparsebody\Edefcv\defcvx\defcvheader}
+\def\macrobodyctxt{%
+ \scanctxt
+ \catcode`\{=\other
+ \catcode`\}=\other
+ \catcode`\^^M=\other
+ \usembodybackslash
+}
-\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype of #1}%
-\defvarargs {#3}\endgroup %
+\def\macroargctxt{%
+ \scanctxt
+ \catcode`\\=\other
}
-% @defivar == @defcv {Instance Variable}
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+ \getargs{#1}% now \macname is the macname and \argl the arglist
+ \ifx\argl\empty % no arguments
+ \paramno=0%
+ \else
+ \expandafter\parsemargdef \argl;%
+ \fi
+ \if1\csname ismacro.\the\macname\endcsname
+ \message{Warning: redefining \the\macname}%
+ \else
+ \expandafter\ifx\csname \the\macname\endcsname \relax
+ \else \errmessage{Macro name \the\macname\space already defined}\fi
+ \global\cslet{macsave.\the\macname}{\the\macname}%
+ \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+ \addtomacrolist{\the\macname}%
+ \fi
+ \begingroup \macrobodyctxt
+ \ifrecursive \expandafter\parsermacbody
+ \else \expandafter\parsemacbody
+ \fi}
+
+\parseargdef\unmacro{%
+ \if1\csname ismacro.#1\endcsname
+ \global\cslet{#1}{macsave.#1}%
+ \global\expandafter\let \csname ismacro.#1\endcsname=0%
+ % Remove the macro name from \macrolist:
+ \begingroup
+ \expandafter\let\csname#1\endcsname \relax
+ \let\definedummyword\unmacrodo
+ \xdef\macrolist{\macrolist}%
+ \endgroup
+ \else
+ \errmessage{Macro #1 not defined}%
+ \fi
+}
-\def\defivar{\defmethparsebody\Edefivar\defivarx\defivarheader}
+% Called by \do from \dounmacro on each macro. The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+ \ifx #1\relax
+ % remove this
+ \else
+ \noexpand\definedummyword \noexpand#1%
+ \fi
+}
-\def\defivarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{Instance variable of #1}%
-\defvarargs {#3}\endgroup %
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% Parse the optional {params} list. Set up \paramno and \paramlist
+% so \defmacro knows what to do. Define \macarg.blah for each blah
+% in the params list, to be ##N where N is the position in that list.
+% That gets used by \mbodybackslash (above).
+
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
+ \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+\def\parsemargdefxxx#1,{%
+ \if#1;\let\next=\relax
+ \else \let\next=\parsemargdefxxx
+ \advance\paramno by 1%
+ \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+ {\xeatspaces{\hash\the\paramno}}%
+ \edef\paramlist{\paramlist\hash\the\paramno,}%
+ \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+
+% This defines the macro itself. There are six cases: recursive and
+% nonrecursive macros of zero, one, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+\def\defmacro{%
+ \let\hash=##% convert placeholders to macro parameter chars
+ \ifrecursive
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\scanmacro{\temp}}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup\noexpand\scanmacro{\temp}}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \fi
+ \else
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \fi
+ \fi}
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {. If so it reads up to the closing }, if not, it reads the whole
+% line. Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg)
+\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+ \ifx\nchar\bgroup\else
+ \expandafter\parsearg
+ \fi \next}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign. Just make them active and then expand them all to nothing.
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+ {%
+ \expandafter\let\obeyedspace=\empty
+ \addtomacrolist{#1}%
+ \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+ }%
+ \next
}
-% These definitions are run if you use @defmethodx, etc.,
-% anywhere other than immediately after a @defmethod, etc.
-\def\defopx #1 {\errmessage{@defopx in invalid context}}
-\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
-\def\defcvx #1 {\errmessage{@defcvx in invalid context}}
-\def\defivarx #1 {\errmessage{@defivarx in invalid context}}
+\message{cross references,}
+
+\newwrite\auxfile
-% Now @defvar
+\newif\ifhavexrefs % True if xref values are known.
+\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-% First, define the processing that is wanted for arguments of @defvar.
-% This is actually simple: just print them in roman.
-% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
-\interlinepenalty=10000
-\endgraf\vskip -\parskip \penalty 10000}
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references. The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross, , , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
-% @defvr Counter foo-count
+\let\nwnode=\node
+\let\lastnode=\empty
-\def\defvr{\defmethparsebody\Edefvr\defvrx\defvrheader}
+% Write a cross-reference definition for the current node. #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+ \ifx\lastnode\empty\else
+ \setref{\lastnode}{#1}%
+ \global\let\lastnode=\empty
+ \fi
+}
-\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \thissection,
+% or the anchor name.
+% 2) NAME-snt - section number and type, passed as the SNT arg, or
+% empty for anchors.
+% 3) NAME-pg - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat. In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+ \pdfmkdest{#1}%
+ \iflinks
+ {%
+ \atdummies % preserve commands, but don't expand them
+ \edef\writexrdef##1##2{%
+ \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+ ##1}{##2}}% these are parameters of \writexrdef
+ }%
+ \toks0 = \expandafter{\thissection}%
+ \immediate \writexrdef{title}{\the\toks0 }%
+ \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+ \writexrdef{pg}{\folio}% will be written later, during \shipout
+ }%
+ \fi
+}
-% @defvar == @defvr Variable
+% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual. All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+ \unsepspaces
+ \def\printedmanual{\ignorespaces #5}%
+ \def\printedrefname{\ignorespaces #3}%
+ \setbox1=\hbox{\printedmanual\unskip}%
+ \setbox0=\hbox{\printedrefname\unskip}%
+ \ifdim \wd0 = 0pt
+ % No printed node name was explicitly given.
+ \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+ % Use the node name inside the square brackets.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ % Use the actual chapter/section title appear inside
+ % the square brackets. Use the real section title if we have it.
+ \ifdim \wd1 > 0pt
+ % It is in another manual, so we don't have it.
+ \def\printedrefname{\ignorespaces #1}%
+ \else
+ \ifhavexrefs
+ % We know the real title if we have the xref values.
+ \def\printedrefname{\refx{#1-title}{}}%
+ \else
+ % Otherwise just copy the Info node name.
+ \def\printedrefname{\ignorespaces #1}%
+ \fi%
+ \fi
+ \fi
+ \fi
+ %
+ % Make link in pdf output.
+ \ifpdf
+ \leavevmode
+ \getfilename{#4}%
+ {\turnoffactive
+ % See comments at \activebackslashdouble.
+ {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+ \backslashparens\pdfxrefdest}%
+ %
+ \ifnum\filenamelength>0
+ \startlink attr{/Border [0 0 0]}%
+ goto file{\the\filename.pdf} name{\pdfxrefdest}%
+ \else
+ \startlink attr{/Border [0 0 0]}%
+ goto name{\pdfmkpgn{\pdfxrefdest}}%
+ \fi
+ }%
+ \linkcolor
+ \fi
+ %
+ % Float references are printed completely differently: "Figure 1.2"
+ % instead of "[somenode], p.3". We distinguish them by the
+ % LABEL-title being set to a magic string.
+ {%
+ % Have to otherify everything special to allow the \csname to
+ % include an _ in the xref name, etc.
+ \indexnofonts
+ \turnoffactive
+ \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+ \csname XR#1-title\endcsname
+ }%
+ \iffloat\Xthisreftitle
+ % If the user specified the print name (third arg) to the ref,
+ % print it instead of our usual "Figure 1.2".
+ \ifdim\wd0 = 0pt
+ \refx{#1-snt}{}%
+ \else
+ \printedrefname
+ \fi
+ %
+ % if the user also gave the printed manual name (fifth arg), append
+ % "in MANUALNAME".
+ \ifdim \wd1 > 0pt
+ \space \putwordin{} \cite{\printedmanual}%
+ \fi
+ \else
+ % node/anchor (non-float) references.
+ %
+ % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+ % insert empty discretionaries after hyphens, which means that it will
+ % not find a line break at a hyphen in a node names. Since some manuals
+ % are best written with fairly long node names, containing hyphens, this
+ % is a loss. Therefore, we give the text of the node name again, so it
+ % is as if TeX is seeing it for the first time.
+ \ifdim \wd1 > 0pt
+ \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+ \else
+ % _ (for example) has to be the character _ for the purposes of the
+ % control sequence corresponding to the node, but it has to expand
+ % into the usual \leavevmode...\vrule stuff for purposes of
+ % printing. So we \turnoffactive for the \refx-snt, back on for the
+ % printing, back off for the \refx-pg.
+ {\turnoffactive
+ % Only output a following space if the -snt ref is nonempty; for
+ % @unnumbered and @anchor, it won't be.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+ }%
+ % output the `[mynode]' via a macro so it can be overridden.
+ \xrefprintnodename\printedrefname
+ %
+ % But we always want a comma and a space:
+ ,\space
+ %
+ % output the `page 3'.
+ \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+ \fi
+ \fi
+ \endlink
+\endgroup}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output. It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents. Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
-\def\defvar{\defparsebody\Edefvar\defvarx\defvarheader}
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+ \ifnum\secno=0
+ \putwordChapter@tie \the\chapno
+ \else \ifnum\subsecno=0
+ \putwordSection@tie \the\chapno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
+\def\Yappendix{%
+ \ifnum\secno=0
+ \putwordAppendix@tie @char\the\appendixno{}%
+ \else \ifnum\subsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie
+ @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
-\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{Variable}%
-\defvarargs {#2}\endgroup %
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+ {%
+ \indexnofonts
+ \otherbackslash
+ \expandafter\global\expandafter\let\expandafter\thisrefX
+ \csname XR#1\endcsname
+ }%
+ \ifx\thisrefX\relax
+ % If not defined, say something at least.
+ \angleleft un\-de\-fined\angleright
+ \iflinks
+ \ifhavexrefs
+ \message{\linenumber Undefined cross reference `#1'.}%
+ \else
+ \ifwarnedxrefs\else
+ \global\warnedxrefstrue
+ \message{Cross reference values unknown; you must run TeX again.}%
+ \fi
+ \fi
+ \fi
+ \else
+ % It's defined, so just use it.
+ \thisrefX
+ \fi
+ #2% Output the suffix in any case.
}
-% @defopt == @defvr {User Option}
+% This is the macro invoked by entries in the aux file. Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions). But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+ \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value.
+ %
+ % Was that xref control sequence that we just defined for a float?
+ \expandafter\iffloat\csname XR#1\endcsname
+ % it was a float, and we have the (safe) float type in \iffloattype.
+ \expandafter\let\expandafter\floatlist
+ \csname floatlist\iffloattype\endcsname
+ %
+ % Is this the first time we've seen this float type?
+ \expandafter\ifx\floatlist\relax
+ \toks0 = {\do}% yes, so just \do
+ \else
+ % had it before, so preserve previous elements in list.
+ \toks0 = \expandafter{\floatlist\do}%
+ \fi
+ %
+ % Remember this xref in the control sequence \floatlistFLOATTYPE,
+ % for later use in \listoffloats.
+ \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}%
+ \fi
+}
-\def\defopt{\defparsebody\Edefopt\defoptx\defoptheader}
+% Read the last existing aux file, if any. No error if none exists.
+%
+\def\tryauxfile{%
+ \openin 1 \jobname.aux
+ \ifeof 1 \else
+ \readdatafile{aux}%
+ \global\havexrefstrue
+ \fi
+ \closein 1
+}
-\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{User Option}%
-\defvarargs {#2}\endgroup %
+\def\setupdatafile{%
+ \catcode`\^^@=\other
+ \catcode`\^^A=\other
+ \catcode`\^^B=\other
+ \catcode`\^^C=\other
+ \catcode`\^^D=\other
+ \catcode`\^^E=\other
+ \catcode`\^^F=\other
+ \catcode`\^^G=\other
+ \catcode`\^^H=\other
+ \catcode`\^^K=\other
+ \catcode`\^^L=\other
+ \catcode`\^^N=\other
+ \catcode`\^^P=\other
+ \catcode`\^^Q=\other
+ \catcode`\^^R=\other
+ \catcode`\^^S=\other
+ \catcode`\^^T=\other
+ \catcode`\^^U=\other
+ \catcode`\^^V=\other
+ \catcode`\^^W=\other
+ \catcode`\^^X=\other
+ \catcode`\^^Z=\other
+ \catcode`\^^[=\other
+ \catcode`\^^\=\other
+ \catcode`\^^]=\other
+ \catcode`\^^^=\other
+ \catcode`\^^_=\other
+ % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+ % in xref tags, i.e., node names. But since ^^e4 notation isn't
+ % supported in the main text, it doesn't seem desirable. Furthermore,
+ % that is not enough: for node names that actually contain a ^
+ % character, we would end up writing a line like this: 'xrdef {'hat
+ % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+ % argument, and \hat is not an expandable control sequence. It could
+ % all be worked out, but why? Either we support ^^ or we don't.
+ %
+ % The other change necessary for this was to define \auxhat:
+ % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+ % and then to call \auxhat in \setq.
+ %
+ \catcode`\^=\other
+ %
+ % Special characters. Should be turned off anyway, but...
+ \catcode`\~=\other
+ \catcode`\[=\other
+ \catcode`\]=\other
+ \catcode`\"=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\$=\other
+ \catcode`\#=\other
+ \catcode`\&=\other
+ \catcode`\%=\other
+ \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+ %
+ % This is to support \ in node names and titles, since the \
+ % characters end up in a \csname. It's easier than
+ % leaving it active and making its active definition an actual \
+ % character. What I don't understand is why it works in the *value*
+ % of the xrdef. Seems like it should be a catcode12 \, and that
+ % should not typeset properly. But it works, so I'm moving on for
+ % now. --karl, 15jan04.
+ \catcode`\\=\other
+ %
+ % Make the characters 128-255 be printing characters.
+ {%
+ \count1=128
+ \def\loop{%
+ \catcode\count1=\other
+ \advance\count1 by 1
+ \ifnum \count1<256 \loop \fi
+ }%
+ }%
+ %
+ % @ is our escape character in .aux files, and we need braces.
+ \catcode`\{=1
+ \catcode`\}=2
+ \catcode`\@=0
}
-% This definition is run if you use @defvarx
-% anywhere other than immediately after a @defvar or @defvarx.
+\def\readdatafile#1{%
+\begingroup
+ \setupdatafile
+ \input\jobname.#1
+\endgroup}
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for info output only.
+\let\footnotestyle=\comment
-\def\defvrx #1 {\errmessage{@defvrx in invalid context}}
-\def\defvarx #1 {\errmessage{@defvarx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
+{\catcode `\@=11
+%
+% Auto-number footnotes. Otherwise like plain.
+\gdef\footnote{%
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
+ \global\advance\footnoteno by \@ne
+ \edef\thisfootno{$^{\the\footnoteno}$}%
+ %
+ % In case the footnote comes at the end of a sentence, preserve the
+ % extra spacing after we do the footnote number.
+ \let\@sf\empty
+ \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+ %
+ % Remove inadvertent blank space before typesetting the footnote number.
+ \unskip
+ \thisfootno\@sf
+ \dofootnote
+}%
-% Now define @deftp
-% Args are printed in bold, a slight difference from @defvar.
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter. Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read. --karl, 16nov96.
+%
+\gdef\dofootnote{%
+ \insert\footins\bgroup
+ % We want to typeset this text as a normal paragraph, even if the
+ % footnote reference occurs in (for example) a display environment.
+ % So reset some parameters.
+ \hsize=\pagewidth
+ \interlinepenalty\interfootnotelinepenalty
+ \splittopskip\ht\strutbox % top baseline for broken footnotes
+ \splitmaxdepth\dp\strutbox
+ \floatingpenalty\@MM
+ \leftskip\z@skip
+ \rightskip\z@skip
+ \spaceskip\z@skip
+ \xspaceskip\z@skip
+ \parindent\defaultparindent
+ %
+ \smallfonts \rm
+ %
+ % Because we use hanging indentation in footnotes, a @noindent appears
+ % to exdent this text, so make it be a no-op. makeinfo does not use
+ % hanging indentation so @noindent can still be needed within footnote
+ % text after an @example or the like (not that this is good style).
+ \let\noindent = \relax
+ %
+ % Hang the footnote text off the number. Use \everypar in case the
+ % footnote extends for more than one paragraph.
+ \everypar = {\hang}%
+ \textindent{\thisfootno}%
+ %
+ % Don't crash into the line above the footnote text. Since this
+ % expands into a box, it must come within the paragraph, lest it
+ % provide a place where TeX can split the footnote.
+ \footstrut
+ \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
-\def\deftpargs #1{\bf \defvarargs{#1}}
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished. Otherwise, the insertion
+% would be lost.
+% Similarily, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes. --kasal, 16nov03.
-% @deftp Class window height width ...
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+ \ifx \insert\ptexinsert
+ \let\insert\saveinsert
+ \else
+ \let\checkinserts\relax
+ \fi
+}
-\def\deftp{\defmethparsebody\Edeftp\deftpx\deftpheader}
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+ \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+ \afterassignment\next
+ % swallow the left brace
+ \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
-\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
-\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
-% This definition is run if you use @deftpx, etc
-% anywhere other than immediately after a @deftp, etc.
+\def\placesaveins#1{%
+ \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+ {\box#1}%
+}
-\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+ \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
+ \gdef\gobblesave @SAVE{}
+}
-\message{cross reference,}
-% Define cross-reference macros
-\newwrite \auxfile
+% initialization:
+\def\newsaveins #1{%
+ \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+ \next
+}
+\def\newsaveinsX #1{%
+ \csname newbox\endcsname #1%
+ \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+ \checksaveins #1}%
+}
-% \setref{foo} defines a cross-reference point named foo.
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
-\def\setref#1{%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ysectionnumberandtype}}
-\def\unnumbsetref#1{%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ynothing}}
+% @image. We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front. If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+ % Do not bother showing banner with epsf.tex v2.7k (available in
+ % doc/epsf.tex and on ctan).
+ \def\epsfannounce{\toks0 = }%
+ \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+ work. It is also included in the Texinfo distribution, or you can get
+ it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+ \ifx\epsfbox\undefined
+ \ifwarnednoepsf \else
+ \errhelp = \noepsfhelp
+ \errmessage{epsf.tex not found, images will be ignored}%
+ \global\warnednoepsftrue
+ \fi
+ \else
+ \imagexxx #1,,,,,\finish
+ \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing this stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+ \catcode`\^^M = 5 % in case we're inside an example
+ \normalturnoffactive % allow _ et al. in names
+ % If the image is by itself, center it.
+ \ifvmode
+ \imagevmodetrue
+ \nobreak\bigskip
+ % Usually we'll have text after the image which will insert
+ % \parskip glue, so insert it here too to equalize the space
+ % above and below.
+ \nobreak\vskip\parskip
+ \nobreak
+ \line\bgroup
+ \fi
+ %
+ % Output the image.
+ \ifpdf
+ \dopdfimage{#1}{#2}{#3}%
+ \else
+ % \epsfbox itself resets \epsf?size at each figure.
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+ \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+ \epsfbox{#1.eps}%
+ \fi
+ %
+ \ifimagevmode \egroup \bigbreak \fi % space after the image
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc. We don't actually implement floating yet, we always include the
+% float "here". But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
-% \xref and \pxref generate cross references to specified points.
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
-\def\pxref #1{see \xrefX [#1,,,,,,,]}
-\def\xref #1{See \xrefX [#1,,,,,,,]}
-\def\xrefX [#1,#2,#3,#4,#5,#6]{%
-\setbox1=\hbox{\i{\losespace#5{}}}%
-\setbox0=\hbox{\losespace#3{}}%
-\ifdim \wd0 =0pt \setbox0=\hbox{\losespace#1{}}\fi%
-\ifdim \wd1 >0pt%
-section \unhbox0{} in \unhbox1%
-\else%
-\refx{#1-snt} [\unhbox0], page\tie \refx{#1-pg}%
-\fi }
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label. Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored. It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+ \let\thiscaption=\empty
+ \let\thisshortcaption=\empty
+ %
+ % don't lose footnotes inside @float.
+ %
+ % BEWARE: when the floats start float, we have to issue warning whenever an
+ % insert appears inside a float which could possibly float. --kasal, 26may04
+ %
+ \startsavinginserts
+ %
+ % We can't be used inside a paragraph.
+ \par
+ %
+ \vtop\bgroup
+ \def\floattype{#1}%
+ \def\floatlabel{#2}%
+ \def\floatloc{#3}% we do nothing with this yet.
+ %
+ \ifx\floattype\empty
+ \let\safefloattype=\empty
+ \else
+ {%
+ % the floattype might have accents or other special characters,
+ % but we need to use it in a control sequence name.
+ \indexnofonts
+ \turnoffactive
+ \xdef\safefloattype{\floattype}%
+ }%
+ \fi
+ %
+ % If label is given but no type, we handle that as the empty type.
+ \ifx\floatlabel\empty \else
+ % We want each FLOATTYPE to be numbered separately (Figure 1,
+ % Table 1, Figure 2, ...). (And if no label, no number.)
+ %
+ \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+ \global\advance\floatno by 1
+ %
+ {%
+ % This magic value for \thissection is output by \setref as the
+ % XREFLABEL-title value. \xrefX uses it to distinguish float
+ % labels (which have a completely different output format) from
+ % node and anchor labels. And \xrdef uses it to construct the
+ % lists of floats.
+ %
+ \edef\thissection{\floatmagic=\safefloattype}%
+ \setref{\floatlabel}{Yfloat}%
+ }%
+ \fi
+ %
+ % start with \parskip glue, I guess.
+ \vskip\parskip
+ %
+ % Don't suppress indentation if a float happens to start a section.
+ \restorefirstparagraphindent
+}
-% \dosetq is the interface for calls from other macros
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption: Foo 1.1
+% @float Foo & @caption{Cap}: Foo: Cap
+% @float Foo & no caption: Foo
+% @float ,lbl & Caption{Cap}: 1.1: Cap
+% @float ,lbl & no caption: 1.1
+% @float & @caption{Cap}: Cap
+% @float & no caption:
+%
+\def\Efloat{%
+ \let\floatident = \empty
+ %
+ % In all cases, if we have a float type, it comes first.
+ \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+ %
+ % If we have an xref label, the number comes next.
+ \ifx\floatlabel\empty \else
+ \ifx\floattype\empty \else % if also had float type, need tie first.
+ \appendtomacro\floatident{\tie}%
+ \fi
+ % the number.
+ \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+ \fi
+ %
+ % Start the printed caption with what we've constructed in
+ % \floatident, but keep it separate; we need \floatident again.
+ \let\captionline = \floatident
+ %
+ \ifx\thiscaption\empty \else
+ \ifx\floatident\empty \else
+ \appendtomacro\captionline{: }% had ident, so need a colon between
+ \fi
+ %
+ % caption text.
+ \appendtomacro\captionline{\scanexp\thiscaption}%
+ \fi
+ %
+ % If we have anything to print, print it, with space before.
+ % Eventually this needs to become an \insert.
+ \ifx\captionline\empty \else
+ \vskip.5\parskip
+ \captionline
+ %
+ % Space below caption.
+ \vskip\parskip
+ \fi
+ %
+ % If have an xref label, write the list of floats info. Do this
+ % after the caption, to avoid chance of it being a breakpoint.
+ \ifx\floatlabel\empty \else
+ % Write the text that goes in the lof to the aux file as
+ % \floatlabel-lof. Besides \floatident, we include the short
+ % caption if specified, else the full caption if specified, else nothing.
+ {%
+ \atdummies
+ %
+ % since we read the caption text in the macro world, where ^^M
+ % is turned into a normal character, we have to scan it back, so
+ % we don't write the literal three characters "^^M" into the aux file.
+ \scanexp{%
+ \xdef\noexpand\gtemp{%
+ \ifx\thisshortcaption\empty
+ \thiscaption
+ \else
+ \thisshortcaption
+ \fi
+ }%
+ }%
+ \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+ \ifx\gtemp\empty \else : \gtemp \fi}}%
+ }%
+ \fi
+ \egroup % end of \vtop
+ %
+ % place the captured inserts
+ %
+ % BEWARE: when the floats start floating, we have to issue warning
+ % whenever an insert appears inside a float which could possibly
+ % float. --kasal, 26may04
+ %
+ \checkinserts
+}
-\def\dosetq #1#2{{\let\folio=0%
-\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
-\next}}
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+ \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
-% \internalsetq {foo}{page} expands into CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
-% When the aux file is read, ' is the escape character
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use. Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+ \ifx#1\relax
+ % Haven't seen this figure type before.
+ \csname newcount\endcsname #1%
+ %
+ % Remember to reset this floatno at the next chap.
+ \expandafter\gdef\expandafter\resetallfloatnos
+ \expandafter{\resetallfloatnos #1=0 }%
+ \fi
+ \let\floatno#1%
+}
-\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
+% \setref calls this to get the XREFLABEL-snt value. We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
-% Things to be expanded by \internalsetq
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
-\def\Ypagenumber{\folio}
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref. That is, the magic
+% \thissection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string. If so, #2 will be the
+% (safe) float type for this float. We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+ \def\temp{#1}%
+ \def\iffloattype{#2}%
+ \ifx\temp\floatmagic
+}
-\def\Ynothing{}
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+ \def\floattype{#1}% floattype
+ {%
+ % the floattype might have accents or other special characters,
+ % but we need to use it in a control sequence name.
+ \indexnofonts
+ \turnoffactive
+ \xdef\safefloattype{\floattype}%
+ }%
+ %
+ % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+ \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+ \ifhavexrefs
+ % if the user said @listoffloats foo but never @float foo.
+ \message{\linenumber No `\safefloattype' floats to list.}%
+ \fi
+ \else
+ \begingroup
+ \leftskip=\tocindent % indent these entries like a toc
+ \let\do=\listoffloatsdo
+ \csname floatlist\safefloattype\endcsname
+ \endgroup
+ \fi
+}
-\def\Ysectionnumberandtype{%
-\ifnum\secno=0 chapter\xreftie\the\chapno %
-\else \ifnum \subsecno=0 section\xreftie\the\chapno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-section\xreftie\the\chapno.\the\secno.\the\subsecno %
-\else %
-section\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\gdef\xreftie{'tie}
-
-% Define @refx to reference a specific cross-reference string.
-
-\def\refx#1{%
-{%
-\expandafter\ifx\csname X#1\endcsname\relax
-% If not defined, say something at least.
-\expandafter\gdef\csname X#1\endcsname {$<$undefined$>$}%
-\message {WARNING: Cross-reference "#1" used but not yet defined}%
-\message {}%
-\fi %
-\csname X#1\endcsname %It's defined, so just use it.
+% This is called on each entry in a list of floats. We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file. We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+ % Can't fully expand XR#1-lof because it can contain anything. Just
+ % pass the control sequence. On the other hand, XR#1-pg is just the
+ % page number, and we want to fully expand that so we can get a link
+ % in pdf output.
+ \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+ %
+ % use the same \entry macro we use to generate the TOC and index.
+ \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+ \writeentry
}}
-% Read the last existing aux file, if any. No error if none exists.
+\message{localization,}
+% and i18n.
-% This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{
-{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
+% @documentlanguage is usually given very early, just after
+% @setfilename. If done too late, it may not override everything
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\parseargdef\documentlanguage{%
+ \tex % read txi-??.tex file in plain TeX.
+ % Read the file if it exists.
+ \openin 1 txi-#1.tex
+ \ifeof 1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \else
+ \input txi-#1.tex
+ \fi
+ \closein 1
+ \endgroup
+}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty. Maybe you need to install it? In the current directory
+should work if nowhere else does.}
-{
-\catcode `\^^@=\other
-\catcode `\\ 1=\other
-\catcode `\\ 2=\other
-\catcode `\^^C=\other
-\catcode `\^^D=\other
-\catcode `\^^E=\other
-\catcode `\^^F=\other
-\catcode `\^^G=\other
-\catcode `\^^H=\other
-\catcode `\\v=\other
-\catcode `\^^L=\other
-\catcode `\\ e=\other
-\catcode `\\ f=\other
-\catcode `\\10=\other
-\catcode `\\11=\other
-\catcode `\\12=\other
-\catcode `\\13=\other
-\catcode `\\14=\other
-\catcode `\\15=\other
-\catcode `\\16=\other
-\catcode `\\17=\other
-\catcode `\\18=\other
-\catcode `\\19=\other
-\catcode `\\1a=\other
-\catcode `\^^[=\other
-\catcode `\^^\=\other
-\catcode `\^^]=\other
-\catcode `\^^^=\other
-\catcode `\^^_=\other
-\catcode `\@=\other
-\catcode `\^=\other
-\catcode `\~=\other
-\catcode `\[=\other
-\catcode `\]=\other
-\catcode`\"=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode `\$=\other
-\catcode `\#=\other
-\catcode `\&=\other
-% the aux file uses ' as the escape.
-% Turn off \ as an escape so we do not lose on
-% entries which were dumped with control sequences in their names.
-% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
-% Reference to such entries still does not work the way one would wish,
-% but at least they do not bomb out when the aux file is read in.
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
+
+
+% Page size parameters.
+%
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be so finicky about underfull hboxes, either.
+\hbadness = 2000
-\catcode `\{=1 \catcode `\}=2
-\catcode `\%=\other
-\catcode `\'=0
-\catcode `\\=\other
+% Following George Bush, just get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
-'openin 1 'jobname.aux
-'ifeof 1 'else 'closein 1 'input 'jobname.aux
-'fi
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything. We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize. We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+ \ifx\emergencystretch\thisisundefined
+ % Allow us to assign to \emergencystretch anyway.
+ \def\emergencystretch{\dimen0}%
+ \else
+ \emergencystretch = .15\hsize
+ \fi
}
-% Open the new aux file. Tex will close it automatically at exit.
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading. The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+ \voffset = #3\relax
+ \topskip = #6\relax
+ \splittopskip = \topskip
+ %
+ \vsize = #1\relax
+ \advance\vsize by \topskip
+ \outervsize = \vsize
+ \advance\outervsize by 2\topandbottommargin
+ \pageheight = \vsize
+ %
+ \hsize = #2\relax
+ \outerhsize = \hsize
+ \advance\outerhsize by 0.5in
+ \pagewidth = \hsize
+ %
+ \normaloffset = #4\relax
+ \bindingoffset = #5\relax
+ %
+ \ifpdf
+ \pdfpageheight #7\relax
+ \pdfpagewidth #8\relax
+ \fi
+ %
+ \setleading{\textleading}
+ %
+ \parindent = \defaultparindent
+ \setemergencystretch
+}
-\openout \auxfile=\jobname.aux
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % If page is nothing but text, make it come out even.
+ \internalpagesizes{46\baselineskip}{6in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{36pt}%
+ {11in}{8.5in}%
+}}
-% Footnotes.
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+ \parskip = 2pt plus 1pt
+ \textleading = 12pt
+ %
+ \internalpagesizes{7.5in}{5in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{16pt}%
+ {9.25in}{7in}%
+ %
+ \lispnarrowing = 0.3in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = .5cm
+}}
-\newcount \footnoteno
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+ \parskip = 1.5pt plus 1pt
+ \textleading = 12pt
+ %
+ \internalpagesizes{7.4in}{4.8in}%
+ {-.2in}{-.4in}%
+ {0pt}{14pt}%
+ {9in}{6in}%
+ %
+ \lispnarrowing = 0.25in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = .4cm
+}}
-\def\supereject{\par\penalty -20000\footnoteno =0 }
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % Double-side printing via postscript on Laserjet 4050
+ % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+ % To change the settings for a different printer or situation, adjust
+ % \normaloffset until the front-side and back-side texts align. Then
+ % do the same for \bindingoffset. You can set these for testing in
+ % your texinfo source file like this:
+ % @tex
+ % \global\normaloffset = -6mm
+ % \global\bindingoffset = 10mm
+ % @end tex
+ \internalpagesizes{51\baselineskip}{160mm}
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{44pt}%
+ {297mm}{210mm}%
+ %
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 5mm
+}}
-\let\ptexfootnote=\footnote
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+ \parskip = 2pt plus 1pt minus 0.1pt
+ \textleading = 12.5pt
+ %
+ \internalpagesizes{160mm}{120mm}%
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{8pt}%
+ {210mm}{148mm}%
+ %
+ \lispnarrowing = 0.2in
+ \tolerance = 800
+ \hfuzz = 1.2pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 2mm
+ \tableindent = 12mm
+}}
-{\catcode `\@=11
-\gdef\footnote{\global\advance \footnoteno by \@ne
-\edef\thisfootno{$^{\the\footnoteno}$}%
-\let\@sf\empty
-\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
-\thisfootno\@sf\parsearg\footnotezzz}
-
-\gdef\footnotezzz #1{\insert\footins{
-\interlinepenalty\interfootnotelinepenalty
-\splittopskip\ht\strutbox % top baseline for broken footnotes
-\splitmaxdepth\dp\strutbox \floatingpenalty\@MM
-\leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip
-\footstrut\hang\textindent{\thisfootno}#1\strut}}
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{237mm}{150mm}%
+ {\voffset}{4.6mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ %
+ % Must explicitly reset to 0 because we call \afourpaper.
+ \globaldefs = 0
+}}
-}%end \catcode `\@=11
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{241mm}{165mm}%
+ {\voffset}{-2.95mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ \globaldefs = 0
+}}
-% End of control word definitions.
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+ \globaldefs = 1
+ %
+ \parskip = 3pt plus 2pt minus 1pt
+ \setleading{\textleading}%
+ %
+ \dimen0 = #1
+ \advance\dimen0 by \voffset
+ %
+ \dimen2 = \hsize
+ \advance\dimen2 by \normaloffset
+ %
+ \internalpagesizes{#1}{\hsize}%
+ {\voffset}{\normaloffset}%
+ {\bindingoffset}{44pt}%
+ {\dimen0}{\dimen2}%
+}}
-\message{and turning on texinfo input format.}
+% Set default to letter.
+%
+\letterpaper
-\newindex{cp}
-\newcodeindex{fn}
-\newcodeindex{vr}
-\newcodeindex{tp}
-\newcodeindex{ky}
-\newcodeindex{pg}
-% Set some numeric style parameters, for 8.5 x 11 format.
+\message{and turning on texinfo input format.}
-\hsize = 6.5in
-\parindent 15pt
-\parskip 18pt plus 1pt
-\baselineskip 15pt
-\advance\topskip by 1.2cm
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other
+\catcode`\~=\other
+\catcode`\^=\other
+\catcode`\_=\other
+\catcode`\|=\other
+\catcode`\<=\other
+\catcode`\>=\other
+\catcode`\+=\other
+\catcode`\$=\other
+\def\normaldoublequote{"}
+\def\normaltilde{~}
+\def\normalcaret{^}
+\def\normalunderscore{_}
+\def\normalverticalbar{|}
+\def\normalless{<}
+\def\normalgreater{>}
+\def\normalplus{+}
+\def\normaldollar{$}%$ font-lock fix
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise. Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
-% Prevent underfull vbox error messages.
-\vbadness=10000
-
-% Use @smallbook to reset parameters for 7x9.5 format
-\def\smallbook{
-\global\lispnarrowing = 0.3in
-\global\baselineskip 12pt
-\global\parskip 3pt plus 1pt
-\global\hsize = 5in
-\global\doublecolumnhsize=2.4in \global\doublecolumnvsize=15.0in
-\global\vsize=7.5in
-\global\tolerance=700
-\global\hfuzz=1pt
-
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
-\global\font\ninett=cmtt9
-
-\global\let\smalllisp=\smalllispx
-\global\let\smallexample=\smalllispx
-\global\def\Esmallexample{\Esmalllisp}
-}
-
-%% For a final copy, take out the rectangles
-%% that mark overfull boxes (in case you have decided
-%% that the text looks ok even though it passes the margin).
-\def\finalout{\overfullrule=0pt}
+% Same as above, but check for italic font. Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts. But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary)
-% Define certain chars to be always in tt font.
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
\catcode`\"=\active
-\def\activedoublequote{{\tt \char '042}}
+\def\activedoublequote{{\tt\char34}}
\let"=\activedoublequote
\catcode`\~=\active
-\def~{{\tt \char '176}}
+\def~{{\tt\char126}}
\chardef\hat=`\^
\catcode`\^=\active
\def^{{\tt \hat}}
+
\catcode`\_=\active
-\def_{{\tt \char '137}}
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
\catcode`\|=\active
-\def|{{\tt \char '174}}
+\def|{{\tt\char124}}
\chardef \less=`\<
\catcode`\<=\active
\def<{{\tt \less}}
\chardef \gtr=`\>
\catcode`\>=\active
\def>{{\tt \gtr}}
+\catcode`\+=\active
+\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+ \normalturnoffactive
+ \otherbackslash
+}
\catcode`\@=0
-% \rawbackslashxx output one backslash character in current font
-{\catcode`\\=\other
-@gdef@rawbackslashxx{\}}
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active
+@def@normalbackslash{{@tt@backslashcurfont}}
+% On startup, @fixbackslash assigns:
+% @let \ = @normalbackslash
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
+ @let\=@normalbackslash
+ @let"=@normaldoublequote
+ @let~=@normaltilde
+ @let^=@normalcaret
+ @let_=@normalunderscore
+ @let|=@normalverticalbar
+ @let<=@normalless
+ @let>=@normalgreater
+ @let+=@normalplus
+ @let$=@normaldollar %$ font-lock fix
+ @unsepspaces
+}
-% \rawbackslash redefines \ as input to do \rawbackslashxx.
-{\catcode`\\=\active
-@gdef@rawbackslash{@let\=@rawbackslashxx }}
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\rawbackslashxx}}
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\' in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+ @ifx\@eatinput @let\ = @normalbackslash @fi
+ @catcode`+=@active
+ @catcode`@_=@active
+}
% Say @foo, not \foo, in error messages.
-\escapechar=`\@
+@escapechar = `@@
-%% These look ok in all fonts, so just make them not special. The @rm below
-%% makes sure that the current font starts out as the newly loaded cmr10
-\catcode`\$=\other \catcode`\%=\other \catcode`\&=\other \catcode`\#=\other
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other
+@catcode`@# = @other
+@catcode`@% = @other
-\catcode 17=0 @c Define control-q
-\catcode`\\=\active
-@let\=@normalbackslash
-@textfonts
-@rm
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+ arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
git://git.whamcloud.com / tools / e2fsprogs.git / commitdiff