+++ /dev/null
-/*
- * ext2_block_move.c --- ext2resizer block mover
- *
- * Copyright (C) 1997 Theodore Ts'o
- *
- * %Begin-Header%
- * All rights reserved.
- * %End-Header%
- */
-
-#include "resize2fs.h"
-
-struct process_block_struct {
- ino_t ino;
- struct ext2_inode * inode;
- ext2_extent bmap;
- errcode_t error;
- int is_dir;
- int flags;
-};
-
-static int process_block(ext2_filsys fs, blk_t *block_nr,
- int blockcnt, blk_t ref_block,
- int ref_offset, void *priv_data)
-{
- struct process_block_struct *pb;
- errcode_t retval;
- blk_t block, new_block;
- int ret = 0;
-
- pb = (struct process_block_struct *) priv_data;
- block = *block_nr;
- new_block = ext2fs_extent_translate(pb->bmap, block);
- if (new_block) {
- *block_nr = new_block;
- ret |= BLOCK_CHANGED;
-#ifdef RESIZE2FS_DEBUG
- if (pb->flags & RESIZE_DEBUG_BMOVE)
- printf("ino=%ld, blockcnt=%d, %u->%u\n", pb->ino,
- blockcnt, block, new_block);
-#endif
- }
-
- if (pb->is_dir) {
- retval = ext2fs_add_dir_block(fs->dblist, pb->ino,
- *block_nr, blockcnt);
- if (retval) {
- pb->error = retval;
- ret |= BLOCK_ABORT;
- }
- }
-
- return ret;
-}
-
-errcode_t ext2fs_block_move(ext2_resize_t rfs)
-{
- ext2_extent bmap;
- blk_t blk, old_blk, new_blk;
- ext2_filsys fs = rfs->new_fs;
- ext2_filsys old_fs = rfs->old_fs;
- ino_t ino;
- struct ext2_inode inode;
- errcode_t retval;
- struct process_block_struct pb;
- ext2_inode_scan scan = 0;
- char *block_buf = 0;
- int size, c;
- int to_move, moved;
-
- new_blk = fs->super->s_first_data_block;
- if (!rfs->itable_buf) {
- retval = ext2fs_get_mem(fs->blocksize *
- fs->inode_blocks_per_group,
- (void **) &rfs->itable_buf);
- if (retval)
- return retval;
- }
- retval = ext2fs_create_extent_table(&bmap, 0);
- if (retval)
- return retval;
-
- /*
- * The first step is to figure out where all of the blocks
- * will go.
- */
- to_move = moved = 0;
- for (blk = old_fs->super->s_first_data_block;
- blk < old_fs->super->s_blocks_count; blk++) {
- if (!ext2fs_test_block_bitmap(old_fs->block_map, blk))
- continue;
- if (!ext2fs_test_block_bitmap(rfs->move_blocks, blk))
- continue;
-
- while (1) {
- if (new_blk >= fs->super->s_blocks_count) {
- retval = ENOSPC;
- goto errout;
- }
- if (!ext2fs_test_block_bitmap(fs->block_map, new_blk) &&
- !ext2fs_test_block_bitmap(rfs->reserve_blocks,
- new_blk))
- break;
- new_blk++;
- }
- ext2fs_mark_block_bitmap(fs->block_map, new_blk);
- ext2fs_add_extent_entry(bmap, blk, new_blk);
- to_move++;
- }
- if (to_move == 0)
- return 0;
- /*
- * Step two is to actually move the blocks
- */
- retval = ext2fs_iterate_extent(bmap, 0, 0, 0);
- if (retval) goto errout;
-
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_BLOCK_RELOC_PASS, 0, to_move);
-
- while (1) {
- retval = ext2fs_iterate_extent(bmap, &old_blk, &new_blk, &size);
- if (retval) goto errout;
- if (!size)
- break;
-#ifdef RESIZE2FS_DEBUG
- if (rfs->flags & RESIZE_DEBUG_BMOVE)
- printf("Moving %d blocks %u->%u\n", size,
- old_blk, new_blk);
-#endif
- do {
- c = size;
- if (c > fs->inode_blocks_per_group)
- c = fs->inode_blocks_per_group;
- retval = io_channel_read_blk(fs->io, old_blk, c,
- rfs->itable_buf);
- if (retval) goto errout;
- retval = io_channel_write_blk(fs->io, new_blk, c,
- rfs->itable_buf);
- if (retval) goto errout;
- size -= c;
- new_blk += c;
- old_blk += c;
- moved += c;
- io_channel_flush(fs->io);
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_BLOCK_RELOC_PASS,
- moved, to_move);
- } while (size > 0);
- io_channel_flush(fs->io);
- }
-
- /*
- * Step 3 is where we update the block pointers
- */
- retval = ext2fs_open_inode_scan(old_fs, 0, &scan);
- if (retval) goto errout;
-
- pb.error = 0;
- pb.bmap = bmap;
- pb.flags = rfs->flags;
-
- retval = ext2fs_get_mem(old_fs->blocksize * 3, (void **) &block_buf);
- if (retval)
- goto errout;
-
- /*
- * We're going to initialize the dblist while we're at it.
- */
- if (old_fs->dblist) {
- ext2fs_free_dblist(old_fs->dblist);
- old_fs->dblist = NULL;
- }
- retval = ext2fs_init_dblist(old_fs, 0);
- if (retval)
- return retval;
-
- retval = ext2fs_get_next_inode(scan, &ino, &inode);
- if (retval) goto errout;
-
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_BLOCK_REF_UPD_PASS,
- 0, old_fs->super->s_inodes_count);
-
- while (ino) {
- if ((inode.i_links_count == 0) ||
- !ext2fs_inode_has_valid_blocks(&inode))
- goto next;
-
- pb.ino = ino;
- pb.inode = &inode;
-
- pb.is_dir = LINUX_S_ISDIR(inode.i_mode);
-
- retval = ext2fs_block_iterate2(old_fs, ino, 0, block_buf,
- process_block, &pb);
- if (retval)
- goto errout;
- if (pb.error) {
- retval = pb.error;
- goto errout;
- }
-
- next:
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_BLOCK_REF_UPD_PASS,
- ino, old_fs->super->s_inodes_count);
- retval = ext2fs_get_next_inode(scan, &ino, &inode);
- if (retval == EXT2_ET_BAD_BLOCK_IN_INODE_TABLE)
- goto next;
- }
- retval = 0;
-errout:
-
- ext2fs_free_extent_table(bmap);
- if (scan)
- ext2fs_close_inode_scan(scan);
- if (block_buf)
- ext2fs_free_mem((void **) &block_buf);
- return retval;
-}
-
+++ /dev/null
-/*
- * ext2_inode_move.c --- ext2resizer inode mover
- *
- * Copyright (C) 1997 Theodore Ts'o
- *
- * %Begin-Header%
- * All rights reserved.
- * %End-Header%
- */
-
-#include "resize2fs.h"
-
-struct istruct {
- ext2_resize_t rfs;
- unsigned long max;
- ext2_extent imap;
- int flags;
- int num;
-};
-
-static int check_and_change_inodes(ino_t dir, int entry,
- struct ext2_dir_entry *dirent, int offset,
- int blocksize, char *buf, void *priv_data)
-{
- struct istruct *is = (struct istruct *) priv_data;
- ino_t new_inode;
-
- if (is->rfs->progress && offset == 0) {
- (is->rfs->progress)(is->rfs, E2_RSZ_INODE_REF_UPD_PASS,
- ++is->num, is->max);
- }
-
- if (!dirent->inode)
- return 0;
-
- new_inode = ext2fs_extent_translate(is->imap, dirent->inode);
-
- if (!new_inode)
- return 0;
-#ifdef RESIZE2FS_DEBUG
- if (is->flags & RESIZE_DEBUG_INODEMAP)
- printf("Inode translate (dir=%ld, name=%.*s, %u->%ld)\n",
- dir, dirent->name_len, dirent->name,
- dirent->inode, new_inode);
-#endif
-
- dirent->inode = new_inode;
-
- return DIRENT_CHANGED;
-}
-
-/*
- * Function to obtain the dblist information (if we didn't get it
- * earlier)
- */
-struct process_block_struct {
- ino_t ino;
- struct ext2_inode * inode;
- errcode_t error;
-};
-
-static int process_block(ext2_filsys fs, blk_t *block_nr,
- int blockcnt, blk_t ref_block,
- int ref_offset, void *priv_data)
-{
- struct process_block_struct *pb;
- errcode_t retval;
- int ret = 0;
-
- pb = (struct process_block_struct *) priv_data;
- retval = ext2fs_add_dir_block(fs->dblist, pb->ino,
- *block_nr, blockcnt);
- if (retval) {
- pb->error = retval;
- ret |= BLOCK_ABORT;
- }
- return ret;
-}
-
-static errcode_t get_dblist(ext2_resize_t rfs)
-{
- ext2_inode_scan scan = 0;
- errcode_t retval;
- char *block_buf = 0;
- struct process_block_struct pb;
- ino_t ino;
- struct ext2_inode inode;
- ext2_filsys fs = rfs->old_fs;
-
- retval = ext2fs_open_inode_scan(fs, 0, &scan);
- if (retval) goto errout;
-
- pb.error = 0;
-
- retval = ext2fs_get_mem(fs->blocksize * 3, (void **) &block_buf);
- if (retval)
- goto errout;
-
- /*
- * We're going to initialize the dblist while we're at it.
- */
- if (fs->dblist) {
- ext2fs_free_dblist(fs->dblist);
- fs->dblist = NULL;
- }
- retval = ext2fs_init_dblist(fs, 0);
- if (retval)
- return retval;
-
- retval = ext2fs_get_next_inode(scan, &ino, &inode);
- if (retval) goto errout;
-
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_INODE_FIND_DIR_PASS,
- 0, fs->super->s_inodes_count);
-
- while (ino) {
- if ((inode.i_links_count == 0) ||
- !ext2fs_inode_has_valid_blocks(&inode) ||
- !LINUX_S_ISDIR(inode.i_mode))
- goto next;
-
- pb.ino = ino;
- pb.inode = &inode;
-
- retval = ext2fs_block_iterate2(fs, ino, 0, block_buf,
- process_block, &pb);
- if (retval)
- goto errout;
- if (pb.error) {
- retval = pb.error;
- goto errout;
- }
-
- next:
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_INODE_FIND_DIR_PASS,
- ino, fs->super->s_inodes_count);
- retval = ext2fs_get_next_inode(scan, &ino, &inode);
- if (retval == EXT2_ET_BAD_BLOCK_IN_INODE_TABLE)
- goto next;
- }
- retval = 0;
-
-errout:
- if (scan)
- ext2fs_close_inode_scan(scan);
- if (block_buf)
- ext2fs_free_mem((void **) &block_buf);
- return retval;
-}
-
-/*
- * Progress callback
- */
-struct callback_info {
- ext2_resize_t rfs;
- unsigned long max;
- int offset;
-};
-
-static errcode_t progress_callback(ext2_filsys fs, ext2_inode_scan scan,
- dgrp_t group, void * priv_data)
-{
- struct callback_info *cb = (struct callback_info *) priv_data;
-
- if (cb->rfs->progress)
- (cb->rfs->progress)(cb->rfs, E2_RSZ_INODE_RELOC_PASS,
- group - cb->offset + 1, cb->max);
-
- return 0;
-}
-
-errcode_t ext2fs_inode_move(ext2_resize_t rfs)
-{
- ino_t ino, new_inode;
- struct ext2_inode inode;
- ext2_inode_scan scan = NULL;
- ext2_extent imap;
- errcode_t retval;
- int group;
- struct istruct is;
- struct callback_info callback_info;
-
- if (rfs->old_fs->group_desc_count <=
- rfs->new_fs->group_desc_count)
- return 0;
-
- retval = ext2fs_create_extent_table(&imap, 0);
- if (retval)
- return retval;
-
- retval = ext2fs_open_inode_scan(rfs->old_fs, 0, &scan);
- if (retval) goto errout;
-
- retval = ext2fs_inode_scan_goto_blockgroup(scan,
- rfs->new_fs->group_desc_count);
- if (retval) goto errout;
-
- callback_info.offset = rfs->new_fs->group_desc_count;
- callback_info.max = (rfs->old_fs->group_desc_count -
- rfs->new_fs->group_desc_count);
- callback_info.rfs = rfs;
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_INODE_RELOC_PASS,
- 0, callback_info.max);
-
- ext2fs_set_inode_callback(scan, progress_callback,
- &callback_info);
-
- new_inode = EXT2_FIRST_INODE(rfs->new_fs->super);
- /*
- * First, copy all of the inodes that need to be moved
- * elsewhere in the inode table
- */
- while (1) {
- retval = ext2fs_get_next_inode(scan, &ino, &inode);
- if (retval) goto errout;
-
- if (!ino)
- break;
-
- if (!ext2fs_test_inode_bitmap(rfs->old_fs->inode_map, ino))
- continue;
-
- /*
- * Find a new inode
- */
- while (1) {
- if (!ext2fs_test_inode_bitmap(rfs->new_fs->inode_map,
- new_inode))
- break;
- new_inode++;
- if (new_inode > rfs->new_fs->super->s_inodes_count) {
- retval = ENOSPC;
- goto errout;
- }
- }
- ext2fs_mark_inode_bitmap(rfs->new_fs->inode_map, new_inode);
- retval = ext2fs_write_inode(rfs->old_fs, new_inode, &inode);
- if (retval) goto errout;
-
- group = (new_inode-1) / EXT2_INODES_PER_GROUP(rfs->new_fs->super);
- if (LINUX_S_ISDIR(inode.i_mode))
- rfs->new_fs->group_desc[group].bg_used_dirs_count++;
-
-#ifdef RESIZE2FS_DEBUG
- if (rfs->flags & RESIZE_DEBUG_INODEMAP)
- printf("Inode moved %ld->%ld\n", ino, new_inode);
-#endif
-
- ext2fs_add_extent_entry(imap, ino, new_inode);
- }
- io_channel_flush(rfs->new_fs->io);
- /*
- * Get the list of directory blocks, if necessary
- */
- if (!rfs->old_fs->dblist) {
- retval = get_dblist(rfs);
- if (retval) goto errout;
- }
- /*
- * Now, we iterate over all of the directories to update the
- * inode references
- */
- is.imap = imap;
- is.flags = rfs->flags;
- is.num = 0;
- is.max = ext2fs_dblist_count(rfs->old_fs->dblist);
- is.rfs = rfs;
-
- if (rfs->progress)
- (rfs->progress)(rfs, E2_RSZ_INODE_REF_UPD_PASS,
- 0, is.max);
-
- retval = ext2fs_dblist_dir_iterate(rfs->old_fs->dblist,
- DIRENT_FLAG_INCLUDE_EMPTY, 0,
- check_and_change_inodes, &is);
- /* if (retval) goto errout; */
-
-errout:
- ext2fs_free_extent_table(imap);
- if (scan)
- ext2fs_close_inode_scan(scan);
- return retval;
-}
-
/*
* Resizing a filesystem consists of the following phases:
*
- * 1. Adjust superblock and (*) write out new parts of the inode
+ * 1. Adjust superblock and write out new parts of the inode
* table
- * 2. Determine blocks which need to be relocated.
- * 3. (*) Relocate blocks which must be moved, adjusting entries
- * in the filesystem in the process.
- * 4. (*) Move inodes which must be moved (only when shrinking a
- * filesystem)
- * 5. (*) Move the inode tables, if necessary.
+ * 2. Determine blocks which need to be relocated, and copy the
+ * contents of blocks from their old locations to the new ones.
+ * 3. Scan the inode table, doing the following:
+ * a. If blocks have been moved, update the block
+ * pointers in the inodes and indirect blocks to
+ * point at the new block locations.
+ * b. If parts of the inode table need to be evacuated,
+ * copy inodes from their old locations to their
+ * new ones.
+ * c. If (b) needs to be done, note which blocks contain
+ * directory information, since we will need to
+ * update the directory information.
+ * 4. Update the directory blocks with the new inode locations.
+ * 5. Move the inode tables, if necessary.
*/
+
#include "resize2fs.h"
+#ifdef linux /* Kludge for debugging */
+#define RESIZE2FS_DEBUG
+#endif
+
+static errcode_t adjust_superblock(ext2_resize_t rfs, blk_t new_size);
+static errcode_t blocks_to_move(ext2_resize_t rfs);
+static errcode_t block_mover(ext2_resize_t rfs);
+static errcode_t inode_scan_and_fix(ext2_resize_t rfs);
+static errcode_t inode_ref_fix(ext2_resize_t rfs);
+static errcode_t move_itables(ext2_resize_t rfs);
+static errcode_t ext2fs_calculate_summary_stats(ext2_filsys fs);
+
+/*
+ * Some helper CPP macros
+ */
+#define FS_BLOCK_BM(fs, i) ((fs)->group_desc[(i)].bg_block_bitmap)
+#define FS_INODE_BM(fs, i) ((fs)->group_desc[(i)].bg_inode_bitmap)
+#define FS_INODE_TB(fs, i) ((fs)->group_desc[(i)].bg_inode_table)
+
+#define IS_BLOCK_BM(fs, i, blk) ((blk) == FS_BLOCK_BM((fs),(i)))
+#define IS_INODE_BM(fs, i, blk) ((blk) == FS_INODE_BM((fs),(i)))
+
+#define IS_INODE_TB(fs, i, blk) (((blk) >= FS_INODE_TB((fs), (i))) && \
+ ((blk) < (FS_INODE_TB((fs), (i)) + \
+ (fs)->inode_blocks_per_group)))
+
+
+
+/*
+ * This is the top-level routine which does the dirty deed....
+ */
+errcode_t resize_fs(ext2_filsys fs, blk_t new_size, int flags,
+ void (*progress)(ext2_resize_t rfs, int pass,
+ unsigned long cur,
+ unsigned long max))
+{
+ ext2_resize_t rfs;
+ errcode_t retval;
+
+ retval = ext2fs_read_bitmaps(fs);
+ if (retval)
+ return retval;
+
+ /*
+ * Create the data structure
+ */
+ retval = ext2fs_get_mem(sizeof(struct ext2_resize_struct),
+ (void **) &rfs);
+ if (retval)
+ return retval;
+ memset(rfs, 0, sizeof(struct ext2_resize_struct));
+
+ rfs->old_fs = fs;
+ rfs->flags = flags;
+ rfs->itable_buf = 0;
+ rfs->progress = progress;
+ retval = ext2fs_dup_handle(fs, &rfs->new_fs);
+ if (retval)
+ goto errout;
+
+ retval = adjust_superblock(rfs, new_size);
+ if (retval)
+ goto errout;
+
+ retval = blocks_to_move(rfs);
+ if (retval)
+ goto errout;
+
+#ifdef RESIZE2FS_DEBUG
+ if (rfs->flags & RESIZE_DEBUG_BMOVE)
+ printf("Number of free blocks: %d/%d, Needed: %d\n",
+ rfs->old_fs->super->s_free_blocks_count,
+ rfs->new_fs->super->s_free_blocks_count,
+ rfs->needed_blocks);
+#endif
+
+ retval = block_mover(rfs);
+ if (retval)
+ goto errout;
+
+ retval = inode_scan_and_fix(rfs);
+ if (retval)
+ goto errout;
+
+ retval = inode_ref_fix(rfs);
+ if (retval)
+ goto errout;
+
+ retval = ext2fs_calculate_summary_stats(rfs->new_fs);
+ if (retval)
+ goto errout;
+
+ retval = move_itables(rfs);
+ if (retval)
+ goto errout;
+
+ retval = ext2fs_close(rfs->new_fs);
+ if (retval)
+ goto errout;
+
+ rfs->flags = flags;
+
+ ext2fs_free(rfs->old_fs);
+ if (rfs->itable_buf)
+ ext2fs_free_mem((void **) &rfs->itable_buf);
+ ext2fs_free_mem((void **) &rfs);
+
+ return 0;
+
+errout:
+ if (rfs->new_fs)
+ ext2fs_free(rfs->new_fs);
+ if (rfs->itable_buf)
+ ext2fs_free_mem((void **) &rfs->itable_buf);
+ ext2fs_free_mem((void **) &rfs);
+ return retval;
+}
+
+/* --------------------------------------------------------------------
+ *
+ * Resize processing, phase 1.
+ *
+ * In this phase we adjust the in-memory superblock information, and
+ * initialize any new parts of the inode table. The new parts of the
+ * inode table are created in virgin disk space, so we can abort here
+ * without any side effects.
+ * --------------------------------------------------------------------
+ */
+
/*
* This routine adjusts the superblock and other data structures...
*/
retval = ext2fs_resize_mem(fs->desc_blocks * fs->blocksize,
(void **) &fs->group_desc);
if (retval)
- return retval;
+ goto errout;
}
/*
- * Fix the count of the last (old) block group
+ * Check to make sure there are enough inodes
+ */
+ if ((rfs->old_fs->super->s_inodes_count -
+ rfs->old_fs->super->s_free_inodes_count) >
+ rfs->new_fs->super->s_inodes_count) {
+ retval = ENOSPC;
+ goto errout;
+ }
+
+ /*
+ * If we are shrinking the number block groups, we're done and
+ * can exit now.
*/
if (rfs->old_fs->group_desc_count > fs->group_desc_count) {
retval = 0;
goto errout;
}
+ /*
+ * Fix the count of the last (old) block group
+ */
old_numblocks = (rfs->old_fs->super->s_blocks_count -
rfs->old_fs->super->s_first_data_block) %
rfs->old_fs->super->s_blocks_per_group;
fs->group_desc[i].bg_free_blocks_count += (numblocks-old_numblocks);
/*
- * Initialize the new block group descriptors
+ * If the number of block groups is staying the same, we're
+ * done and can exit now. (If the number block groups is
+ * shrinking, we had exited earlier.)
*/
if (rfs->old_fs->group_desc_count >= fs->group_desc_count) {
retval = 0;
goto errout;
}
+ /*
+ * Initialize the new block group descriptors
+ */
retval = ext2fs_get_mem(fs->blocksize * fs->inode_blocks_per_group,
(void **) &rfs->itable_buf);
if (retval)
adj = rfs->old_fs->group_desc_count;
max_group = fs->group_desc_count - adj;
if (rfs->progress)
- rfs->progress(rfs, E2_RSZ_ADJUST_SUPERBLOCK_PASS,
+ rfs->progress(rfs, E2_RSZ_EXTEND_ITABLE_PASS,
0, max_group);
for (i = rfs->old_fs->group_desc_count;
i < fs->group_desc_count; i++) {
rfs->itable_buf);
if (retval) goto errout;
- /* io_channel_flush(fs->io); */
+ io_channel_flush(fs->io);
if (rfs->progress)
- rfs->progress(rfs, E2_RSZ_ADJUST_SUPERBLOCK_PASS,
+ rfs->progress(rfs, E2_RSZ_EXTEND_ITABLE_PASS,
i - adj + 1, max_group);
group_block += fs->super->s_blocks_per_group;
return retval;
}
+/* --------------------------------------------------------------------
+ *
+ * Resize processing, phase 2.
+ *
+ * In this phase we adjust determine which blocks need to be moved, in
+ * blocks_to_move(). We then copy the blocks to their ultimate new
+ * destinations using block_mover(). Since we are copying blocks to
+ * their new locations, again during this pass we can abort without
+ * any problems.
+ * --------------------------------------------------------------------
+ */
+
/*
* This helper function creates a block bitmap with all of the
* filesystem meta-data blocks.
return 0;
}
-
-
-/*
- * Some helper CPP macros
- */
-#define FS_BLOCK_BM(fs, i) ((fs)->group_desc[(i)].bg_block_bitmap)
-#define FS_INODE_BM(fs, i) ((fs)->group_desc[(i)].bg_inode_bitmap)
-#define FS_INODE_TB(fs, i) ((fs)->group_desc[(i)].bg_inode_table)
-
-#define IS_BLOCK_BM(fs, i, blk) ((blk) == FS_BLOCK_BM((fs),(i)))
-#define IS_INODE_BM(fs, i, blk) ((blk) == FS_INODE_BM((fs),(i)))
-
-#define IS_INODE_TB(fs, i, blk) (((blk) >= FS_INODE_TB((fs), (i))) && \
- ((blk) < (FS_INODE_TB((fs), (i)) + \
- (fs)->inode_blocks_per_group)))
-
/*
* This routine marks and unmarks reserved blocks in the new block
* bitmap. It also determines which blocks need to be moved and
return retval;
}
+/*
+ * This helper function tries to allocate a new block. We try to
+ * avoid hitting the original group descriptor blocks at least at
+ * first, since we want to make it possible to recover from a badly
+ * aborted resize operation as much as possible.
+ *
+ * In the future, I may further modify this routine to balance out
+ * where we get the new blocks across the various block groups.
+ * Ideally we would allocate blocks that corresponded with the block
+ * group of the containing inode, and keep contiguous blocks
+ * together. However, this very difficult to do efficiently, since we
+ * don't have the necessary information up front.
+ */
+
+#define AVOID_OLD 1
+#define DESPERATION 2
+
+static void init_block_alloc(ext2_resize_t rfs)
+{
+ rfs->alloc_state = AVOID_OLD;
+ rfs->new_blk = rfs->new_fs->super->s_first_data_block;
+}
+
+static blk_t get_new_block(ext2_resize_t rfs)
+{
+ ext2_filsys fs = rfs->new_fs;
+
+ while (1) {
+ if (rfs->new_blk >= fs->super->s_blocks_count) {
+ if (rfs->alloc_state == DESPERATION)
+ return 0;
+
+#ifdef RESIZE2FS_DEBUG
+ if (rfs->flags & RESIZE_DEBUG_BMOVE)
+ printf("Going into desperation "
+ "mode for block allocations\n");
+#endif
+ rfs->alloc_state = DESPERATION;
+ rfs->new_blk = fs->super->s_first_data_block;
+ continue;
+ }
+ if (ext2fs_test_block_bitmap(fs->block_map, rfs->new_blk) ||
+ ext2fs_test_block_bitmap(rfs->reserve_blocks,
+ rfs->new_blk) ||
+ ((rfs->alloc_state == AVOID_OLD) &&
+ ext2fs_test_block_bitmap(rfs->old_fs->block_map,
+ rfs->new_blk))) {
+ rfs->new_blk++;
+ continue;
+ }
+ return rfs->new_blk;
+ }
+}
+
+static errcode_t block_mover(ext2_resize_t rfs)
+{
+ blk_t blk, old_blk, new_blk;
+ ext2_filsys fs = rfs->new_fs;
+ ext2_filsys old_fs = rfs->old_fs;
+ errcode_t retval;
+ int size, c;
+ int to_move, moved;
+
+ new_blk = fs->super->s_first_data_block;
+ if (!rfs->itable_buf) {
+ retval = ext2fs_get_mem(fs->blocksize *
+ fs->inode_blocks_per_group,
+ (void **) &rfs->itable_buf);
+ if (retval)
+ return retval;
+ }
+ retval = ext2fs_create_extent_table(&rfs->bmap, 0);
+ if (retval)
+ return retval;
+
+ /*
+ * The first step is to figure out where all of the blocks
+ * will go.
+ */
+ to_move = moved = 0;
+ init_block_alloc(rfs);
+ for (blk = old_fs->super->s_first_data_block;
+ blk < old_fs->super->s_blocks_count; blk++) {
+ if (!ext2fs_test_block_bitmap(old_fs->block_map, blk))
+ continue;
+ if (!ext2fs_test_block_bitmap(rfs->move_blocks, blk))
+ continue;
+
+ new_blk = get_new_block(rfs);
+ if (!new_blk) {
+ retval = ENOSPC;
+ goto errout;
+ }
+ ext2fs_mark_block_bitmap(fs->block_map, new_blk);
+ ext2fs_add_extent_entry(rfs->bmap, blk, new_blk);
+ to_move++;
+ }
+
+ if (to_move == 0) {
+ retval = 0;
+ goto errout;
+ }
+
+ /*
+ * Step two is to actually move the blocks
+ */
+ retval = ext2fs_iterate_extent(rfs->bmap, 0, 0, 0);
+ if (retval) goto errout;
+
+ if (rfs->progress)
+ (rfs->progress)(rfs, E2_RSZ_BLOCK_RELOC_PASS, 0, to_move);
+
+ while (1) {
+ retval = ext2fs_iterate_extent(rfs->bmap, &old_blk, &new_blk, &size);
+ if (retval) goto errout;
+ if (!size)
+ break;
+#ifdef RESIZE2FS_DEBUG
+ if (rfs->flags & RESIZE_DEBUG_BMOVE)
+ printf("Moving %d blocks %u->%u\n", size,
+ old_blk, new_blk);
+#endif
+ do {
+ c = size;
+ if (c > fs->inode_blocks_per_group)
+ c = fs->inode_blocks_per_group;
+ retval = io_channel_read_blk(fs->io, old_blk, c,
+ rfs->itable_buf);
+ if (retval) goto errout;
+ retval = io_channel_write_blk(fs->io, new_blk, c,
+ rfs->itable_buf);
+ if (retval) goto errout;
+ size -= c;
+ new_blk += c;
+ old_blk += c;
+ moved += c;
+ if (rfs->progress) {
+ io_channel_flush(fs->io);
+ (rfs->progress)(rfs, E2_RSZ_BLOCK_RELOC_PASS,
+ moved, to_move);
+ }
+ } while (size > 0);
+ io_channel_flush(fs->io);
+ }
+
+errout:
+ return retval;
+}
+
+
+/* --------------------------------------------------------------------
+ *
+ * Resize processing, phase 3
+ *
+ * --------------------------------------------------------------------
+ */
+
+
+struct process_block_struct {
+ ext2_resize_t rfs;
+ ino_t ino;
+ struct ext2_inode * inode;
+ errcode_t error;
+ int is_dir;
+ int changed;
+};
+
+static int process_block(ext2_filsys fs, blk_t *block_nr,
+ int blockcnt, blk_t ref_block,
+ int ref_offset, void *priv_data)
+{
+ struct process_block_struct *pb;
+ errcode_t retval;
+ blk_t block, new_block;
+ int ret = 0;
+
+ pb = (struct process_block_struct *) priv_data;
+ block = *block_nr;
+ if (pb->rfs->bmap) {
+ new_block = ext2fs_extent_translate(pb->rfs->bmap, block);
+ if (new_block) {
+ *block_nr = new_block;
+ ret |= BLOCK_CHANGED;
+ pb->changed = 1;
+#ifdef RESIZE2FS_DEBUG
+ if (pb->rfs->flags & RESIZE_DEBUG_BMOVE)
+ printf("ino=%ld, blockcnt=%d, %u->%u\n",
+ pb->ino, blockcnt, block, new_block);
+#endif
+ block = new_block;
+ }
+ }
+ if (pb->is_dir) {
+ retval = ext2fs_add_dir_block(fs->dblist, pb->ino,
+ block, blockcnt);
+ if (retval) {
+ pb->error = retval;
+ ret |= BLOCK_ABORT;
+ }
+ }
+ return ret;
+}
+
+/*
+ * Progress callback
+ */
+static errcode_t progress_callback(ext2_filsys fs, ext2_inode_scan scan,
+ dgrp_t group, void * priv_data)
+{
+ ext2_resize_t rfs = (ext2_resize_t) priv_data;
+
+ /*
+ * The if (group+1) == 0 test is to protect against old ext2
+ * libraries. It shouldn't be needed against new libraries.
+ */
+ if (group == 0 || (group+1) == 0)
+ return 0;
+
+ if (rfs->progress) {
+ io_channel_flush(fs->io);
+ (rfs->progress)(rfs, E2_RSZ_INODE_SCAN_PASS,
+ group, fs->group_desc_count-1);
+ }
+
+ return 0;
+}
+
+static errcode_t inode_scan_and_fix(ext2_resize_t rfs)
+{
+ struct process_block_struct pb;
+ ino_t ino, new_inode;
+ struct ext2_inode inode;
+ ext2_inode_scan scan = NULL;
+ errcode_t retval;
+ int group;
+ char *block_buf = 0;
+ ino_t start_to_move;
+
+ if ((rfs->old_fs->group_desc_count <=
+ rfs->new_fs->group_desc_count) &&
+ !rfs->bmap)
+ return 0;
+
+ retval = ext2fs_open_inode_scan(rfs->old_fs, 0, &scan);
+ if (retval) goto errout;
+
+ retval = ext2fs_init_dblist(rfs->old_fs, 0);
+ if (retval) goto errout;
+ retval = ext2fs_get_mem(rfs->old_fs->blocksize * 3,
+ (void **) &block_buf);
+ if (retval) goto errout;
+
+ start_to_move = (rfs->new_fs->group_desc_count *
+ rfs->new_fs->super->s_inodes_per_group);
+
+ if (rfs->progress)
+ (rfs->progress)(rfs, E2_RSZ_INODE_SCAN_PASS,
+ 0, rfs->old_fs->group_desc_count-1);
+
+ ext2fs_set_inode_callback(scan, progress_callback, (void *) rfs);
+ pb.rfs = rfs;
+ pb.inode = &inode;
+ pb.error = 0;
+ new_inode = EXT2_FIRST_INODE(rfs->new_fs->super);
+ /*
+ * First, copy all of the inodes that need to be moved
+ * elsewhere in the inode table
+ */
+ while (1) {
+ retval = ext2fs_get_next_inode(scan, &ino, &inode);
+ if (retval) goto errout;
+ if (!ino)
+ break;
+
+ if (inode.i_links_count == 0)
+ continue; /* inode not in use */
+
+ pb.is_dir = LINUX_S_ISDIR(inode.i_mode);
+ pb.changed = 0;
+
+ if (ext2fs_inode_has_valid_blocks(&inode) &&
+ (rfs->bmap || pb.is_dir)) {
+ pb.ino = ino;
+ retval = ext2fs_block_iterate2(rfs->old_fs,
+ ino, 0, block_buf,
+ process_block, &pb);
+ if (retval)
+ goto errout;
+ if (pb.error) {
+ retval = pb.error;
+ goto errout;
+ }
+ }
+
+ if (ino <= start_to_move)
+ continue; /* Don't need to move it. */
+
+ /*
+ * Find a new inode
+ */
+ while (1) {
+ if (!ext2fs_test_inode_bitmap(rfs->new_fs->inode_map,
+ new_inode))
+ break;
+ new_inode++;
+ if (new_inode > rfs->new_fs->super->s_inodes_count) {
+ retval = ENOSPC;
+ goto errout;
+ }
+ }
+ ext2fs_mark_inode_bitmap(rfs->new_fs->inode_map, new_inode);
+ if (pb.changed) {
+ /* Get the new version of the inode */
+ retval = ext2fs_read_inode(rfs->old_fs, ino, &inode);
+ if (retval) goto errout;
+ }
+ retval = ext2fs_write_inode(rfs->old_fs, new_inode, &inode);
+ if (retval) goto errout;
+
+ group = (new_inode-1) / EXT2_INODES_PER_GROUP(rfs->new_fs->super);
+ if (LINUX_S_ISDIR(inode.i_mode))
+ rfs->new_fs->group_desc[group].bg_used_dirs_count++;
+
+#ifdef RESIZE2FS_DEBUG
+ if (rfs->flags & RESIZE_DEBUG_INODEMAP)
+ printf("Inode moved %ld->%ld\n", ino, new_inode);
+#endif
+ if (!rfs->imap) {
+ retval = ext2fs_create_extent_table(&rfs->imap, 0);
+ if (retval)
+ goto errout;
+ }
+ ext2fs_add_extent_entry(rfs->imap, ino, new_inode);
+ }
+ io_channel_flush(rfs->old_fs->io);
+
+errout:
+ if (rfs->bmap) {
+ ext2fs_free_extent_table(rfs->bmap);
+ rfs->bmap = 0;
+ }
+ if (scan)
+ ext2fs_close_inode_scan(scan);
+ if (block_buf)
+ ext2fs_free_mem((void **) &block_buf);
+ return retval;
+}
+
+/* --------------------------------------------------------------------
+ *
+ * Resize processing, phase 4.
+ *
+ * --------------------------------------------------------------------
+ */
+
+struct istruct {
+ ext2_resize_t rfs;
+ unsigned long max;
+ int num;
+};
+
+static int check_and_change_inodes(ino_t dir, int entry,
+ struct ext2_dir_entry *dirent, int offset,
+ int blocksize, char *buf, void *priv_data)
+{
+ struct istruct *is = (struct istruct *) priv_data;
+ ino_t new_inode;
+
+ if (is->rfs->progress && offset == 0) {
+ io_channel_flush(is->rfs->old_fs->io);
+ (is->rfs->progress)(is->rfs, E2_RSZ_INODE_REF_UPD_PASS,
+ ++is->num, is->max);
+ }
+
+ if (!dirent->inode)
+ return 0;
+
+ new_inode = ext2fs_extent_translate(is->rfs->imap, dirent->inode);
+
+ if (!new_inode)
+ return 0;
+#ifdef RESIZE2FS_DEBUG
+ if (is->rfs->flags & RESIZE_DEBUG_INODEMAP)
+ printf("Inode translate (dir=%ld, name=%.*s, %u->%ld)\n",
+ dir, dirent->name_len, dirent->name,
+ dirent->inode, new_inode);
+#endif
+
+ dirent->inode = new_inode;
+
+ return DIRENT_CHANGED;
+}
+
+static errcode_t inode_ref_fix(ext2_resize_t rfs)
+{
+ errcode_t retval;
+ struct istruct is;
+
+ if (!rfs->imap)
+ return 0;
+
+ /*
+ * Now, we iterate over all of the directories to update the
+ * inode references
+ */
+ is.num = 0;
+ is.max = ext2fs_dblist_count(rfs->old_fs->dblist);
+ is.rfs = rfs;
+
+ if (rfs->progress)
+ (rfs->progress)(rfs, E2_RSZ_INODE_REF_UPD_PASS,
+ 0, is.max);
+
+ retval = ext2fs_dblist_dir_iterate(rfs->old_fs->dblist,
+ DIRENT_FLAG_INCLUDE_EMPTY, 0,
+ check_and_change_inodes, &is);
+
+ ext2fs_free_extent_table(rfs->imap);
+ rfs->imap = 0;
+ return retval;
+}
+
+
+/* --------------------------------------------------------------------
+ *
+ * Resize processing, phase 5.
+ *
+ * In this phase we actually move the inode table around, and then
+ * update the summary statistics. This is scary, since aborting here
+ * will potentially scramble the filesystem. (We are moving the
+ * inode tables around in place, and so the potential for lost data,
+ * or at the very least scrambling the mapping between filenames and
+ * inode numbers is very high in case of a power failure here.)
+ * --------------------------------------------------------------------
+ */
+
/*
* A very scary routine --- this one moves the inode table around!!!
ext2_filsys fs = rfs->new_fs;
char *cp;
blk_t old_blk, new_blk;
- errcode_t retval, err;
+ errcode_t retval;
int to_move, moved;
max = fs->group_desc_count;
if (rfs->progress)
rfs->progress(rfs, E2_RSZ_MOVE_ITABLE_PASS, 0, to_move);
+ rfs->old_fs->flags |= EXT2_FLAG_MASTER_SB_ONLY;
+
for (i=0; i < max; i++) {
old_blk = rfs->old_fs->group_desc[i].bg_inode_table;
new_blk = fs->group_desc[i].bg_inode_table;
fs->inode_blocks_per_group,
rfs->itable_buf);
if (retval)
- goto backout;
+ goto errout;
/*
* The end of the inode table segment often contains
- * all zeros. Find out if we have several blocks of
- * zeros so we can optimize the write.
+ * all zeros, and we're often only moving the inode
+ * table down a block or two. If so, we can optimize
+ * things by not rewriting blocks that we know to be zero
+ * already.
*/
for (cp = rfs->itable_buf+size, n=0; n < size; n++, cp--)
if (*cp)
if (retval) {
io_channel_write_blk(fs->io, old_blk,
num, rfs->itable_buf);
- goto backout;
+ goto errout;
}
if (n > diff) {
retval = io_channel_write_blk(fs->io,
old_blk + fs->inode_blocks_per_group,
- diff, rfs->itable_buf - fs->blocksize * diff);
+ diff, (rfs->itable_buf +
+ (fs->inode_blocks_per_group - diff) *
+ fs->blocksize));
if (retval)
- goto backout;
+ goto errout;
}
- io_channel_flush(fs->io);
- if (rfs->progress)
+ rfs->old_fs->group_desc[i].bg_inode_table = new_blk;
+ ext2fs_mark_super_dirty(rfs->old_fs);
+ if (rfs->progress) {
+ ext2fs_flush(rfs->old_fs);
rfs->progress(rfs, E2_RSZ_MOVE_ITABLE_PASS,
++moved, to_move);
+ }
}
- ext2fs_flush(rfs->new_fs);
- io_channel_flush(fs->io);
+ ext2fs_flush(fs);
#ifdef RESIZE2FS_DEBUG
if (rfs->flags & RESIZE_DEBUG_ITABLEMOVE)
printf("Inode table move finished.\n");
#endif
return 0;
-backout:
-#ifdef RESIZE2FS_DEBUG
- if (rfs->flags & RESIZE_DEBUG_ITABLEMOVE)
- printf("Error: %s; now backing out!\n", error_message(retval));
-#endif
- while (--i >= 0) {
-#ifdef RESIZE2FS_DEBUG
- if (rfs->flags & RESIZE_DEBUG_ITABLEMOVE)
- printf("Group %d block %u->%u\n", i, new_blk, old_blk);
-#endif
- old_blk = rfs->old_fs->group_desc[i].bg_inode_table;
- new_blk = fs->group_desc[i].bg_inode_table;
-
- err = io_channel_read_blk(fs->io, new_blk,
- fs->inode_blocks_per_group,
- rfs->itable_buf);
- if (err)
- continue;
- err = io_channel_write_blk(fs->io, old_blk,
- fs->inode_blocks_per_group,
- rfs->itable_buf);
- }
+errout:
return retval;
}
ext2fs_mark_super_dirty(fs);
return 0;
}
-
-/*
- * This is the top-level routine which does the dirty deed....
- */
-errcode_t resize_fs(ext2_filsys fs, blk_t new_size, int flags,
- void (*progress)(ext2_resize_t rfs, int pass,
- unsigned long cur,
- unsigned long max))
-{
- ext2_resize_t rfs;
- errcode_t retval;
-
- retval = ext2fs_read_bitmaps(fs);
- if (retval)
- return retval;
-
- /*
- * Create the data structure
- */
- retval = ext2fs_get_mem(sizeof(struct ext2_resize_struct),
- (void **) &rfs);
- if (retval)
- return retval;
- memset(rfs, 0, sizeof(struct ext2_resize_struct));
-
- rfs->old_fs = fs;
- rfs->flags = flags;
- rfs->itable_buf = 0;
- rfs->progress = progress;
- retval = ext2fs_dup_handle(fs, &rfs->new_fs);
- if (retval)
- goto errout;
-
- retval = adjust_superblock(rfs, new_size);
- if (retval)
- goto errout;
-
- retval = blocks_to_move(rfs);
- if (retval)
- goto errout;
-
-#ifdef RESIZE2FS_DEBUG
- if (rfs->flags & RESIZE_DEBUG_BMOVE)
- printf("Number of free blocks: %d/%d, Needed: %d\n",
- rfs->old_fs->super->s_free_blocks_count,
- rfs->new_fs->super->s_free_blocks_count,
- rfs->needed_blocks);
-#endif
-
- retval = ext2fs_block_move(rfs);
- if (retval)
- goto errout;
-
- retval = ext2fs_inode_move(rfs);
- if (retval)
- goto errout;
-
- retval = move_itables(rfs);
- if (retval)
- goto errout;
-
- retval = ext2fs_calculate_summary_stats(rfs->new_fs);
- if (retval)
- goto errout;
-
- retval = ext2fs_close(rfs->new_fs);
- if (retval)
- goto errout;
-
- rfs->flags = flags;
-
- ext2fs_free(rfs->old_fs);
- if (rfs->itable_buf)
- ext2fs_free_mem((void **) &rfs->itable_buf);
- ext2fs_free_mem((void **) &rfs);
-
- return 0;
-
-errout:
- if (rfs->new_fs)
- ext2fs_free(rfs->new_fs);
- if (rfs->itable_buf)
- ext2fs_free_mem((void **) &rfs->itable_buf);
- ext2fs_free_mem((void **) &rfs);
- return retval;
-}