.\"
.TH TUNE2FS 8 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@"
.SH NAME
-tune2fs \- adjust tunable filesystem parameters on ext2/ext3/ext4 filesystems
+tune2fs \- adjust tunable file system parameters on ext2/ext3/ext4 file systems
.SH SYNOPSIS
.B tune2fs
[
.RI [^]mount-options [,...]
]
[
-.B \-p
-.I mmp_update_interval
-]
-[
.B \-r
.I reserved-blocks-count
]
[
-.B \-s
-.I sparse-super-flag
-]
-[
.B \-u
.I user
]
.I last-mounted-directory
]
[
-.B \-O
+.B \-O
.RI [^] feature [,...]
]
[
]
device
.SH DESCRIPTION
-.BI tune2fs
-allows the system administrator to adjust various tunable filesystem
-parameters on Linux ext2, ext3, or ext4 filesystems. The current values
+.B tune2fs
+allows the system administrator to adjust various tunable file system
+parameters on Linux ext2, ext3, or ext4 file systems. The current values
of these options can be displayed by using the
.B -l
option to
.SH OPTIONS
.TP
.BI \-c " max-mount-counts"
-Adjust the number of mounts after which the filesystem will be checked by
-.BR e2fsck (8).
+Adjust the number of mounts after which the file system will be checked by
+.BR e2fsck (8).
If
.I max-mount-counts
-is 0 or \-1, the number of times the filesystem is mounted will be disregarded
+is the string "random", tune2fs will use a random value between 20 and 40.
+If
+.I max-mount-counts
+is 0 or \-1, the number of times the file system is mounted will be disregarded
by
.BR e2fsck (8)
and the kernel.
.sp
-Staggering the mount-counts at which filesystems are forcibly
-checked will avoid all filesystems being checked at one time
-when using journaled filesystems.
-.sp
-You should strongly consider the consequences of disabling
-mount-count-dependent checking entirely. Bad disk drives, cables,
-memory, and kernel bugs could all corrupt a filesystem without
-marking the filesystem dirty or in error. If you are using
-journaling on your filesystem, your filesystem will
-.B never
-be marked dirty, so it will not normally be checked. A
-filesystem error detected by the kernel will still force
-an fsck on the next reboot, but it may already be too late
-to prevent data loss at that point.
+Staggering the mount-counts at which file systems are forcibly
+checked will avoid all file systems being checked at one time
+when using journaled file systems.
.sp
-See also the
-.B \-i
-option for time-dependent checking.
+Mount-count-dependent checking is disabled by default to avoid
+unanticipated long reboots while e2fsck does its work. If you
+are concerned about file system corruptions caused by potential hardware
+problems of kernel bugs, a better solution than mount-count-dependent
+checking is to use the
+.BR e2scrub (8)
+program. This does require placing the file system on an LVM volume,
+however.
.TP
.BI \-C " mount-count"
-Set the number of times the filesystem has been mounted.
+Set the number of times the file system has been mounted.
If set to a greater value than the max-mount-counts parameter
-set by the
+set by the
.B \-c
option,
-.BR e2fsck (8)
-will check the filesystem at the next reboot.
+.BR e2fsck (8)
+will check the file system at the next reboot.
.TP
.BI \-e " error-behavior"
Change the behavior of the kernel code when errors are detected.
-In all cases, a filesystem error will cause
+In all cases, a file system error will cause
.BR e2fsck (8)
-to check the filesystem on the next boot.
+to check the file system on the next boot.
.I error-behavior
can be one of the following:
.RS 1.2i
Continue normal execution.
.TP
.B remount-ro
-Remount filesystem read-only.
+Remount file system read-only.
.TP
.B panic
Cause a kernel panic.
.RE
.TP
.BI \-E " extended-options"
-Set extended options for the filesystem. Extended options are comma
+Set extended options for the file system. Extended options are comma
separated, and may take an argument using the equals ('=') sign.
The following extended options are supported:
.RS 1.2i
.B clear_mmp
Reset the MMP block (if any) back to the clean state. Use only if
absolutely certain the device is not currently mounted or being
-fscked, or major filesystem corruption can result. Needs '-f'.
+fscked, or major file system corruption can result. Needs '-f'.
.TP
.BI mmp_update_interval= interval
Adjust the initial MMP update interval to
feature be enabled.
.TP
.BI stride= stride-size
-Configure the filesystem for a RAID array with
+Configure the file system for a RAID array with
.I stride-size
-filesystem blocks. This is the number of blocks read or written to disk
-before moving to next disk. This mostly affects placement of filesystem
+file system blocks. This is the number of blocks read or written to disk
+before moving to next disk. This mostly affects placement of file system
metadata like bitmaps at
.BR mke2fs (2)
time to avoid placing them on a single disk, which can hurt the performance.
It may also be used by block allocator.
.TP
.BI stripe_width= stripe-width
-Configure the filesystem for a RAID array with
+Configure the file system for a RAID array with
.I stripe-width
-filesystem blocks per stripe. This is typically be stride-size * N, where
+file system blocks per stripe. This is typically be stride-size * N, where
N is the number of data disks in the RAID (e.g. RAID 5 N+1, RAID 6 N+2).
This allows the block allocator to prevent read-modify-write of the
parity in a RAID stripe if possible when the data is written.
.TP
.BI hash_alg= hash-alg
-Set the default hash algorithm used for filesystems with hashed b-tree
+Set the default hash algorithm used for file systems with hashed b-tree
directories. Valid algorithms accepted are:
.IR legacy ,
.IR half_md4 ,
and
.IR tea .
.TP
+.BI encoding= encoding-name
+Enable the
+.I casefold
+feature in the super block and set
+.I encoding-name
+as the encoding to be used. If
+.I encoding-name
+is not specified, utf8 is used. The encoding cannot be altered if casefold
+was previously enabled.
+.TP
+.BI encoding_flags= encoding-flags
+Define parameters for file name character encoding operations. If a
+flag is not changed using this parameter, its default value is used.
+.I encoding-flags
+should be a comma-separated lists of flags to be enabled. The flags cannot be
+altered if casefold was previously enabled.
+
+The only flag that can be set right now is
+.I strict
+which means that invalid strings should be rejected by the file system.
+In the default configuration, the
+.I strict
+flag is disabled.
+.TP
.BI mount_opts= mount_option_string
Set a set of default mount options which will be used when the file
system is mounted. Unlike the bitmask-based default mount options which
This superblock setting is only honored in 2.6.35+ kernels;
and not at all by the ext2 and ext3 file system drivers.
.TP
+.B force_fsck
+Set a flag in the file system superblock indicating that errors have been found.
+This will force fsck to run at the next mount.
+.TP
.B test_fs
-Set a flag in the filesystem superblock indicating that it may be
-mounted using experimental kernel code, such as the ext4dev filesystem.
+Set a flag in the file system superblock indicating that it may be
+mounted using experimental kernel code, such as the ext4dev file system.
.TP
.B ^test_fs
-Clear the test_fs flag, indicating the filesystem should only be mounted
-using production-level filesystem code.
+Clear the test_fs flag, indicating the file system should only be mounted
+using production-level file system code.
.RE
.TP
.B \-f
-Force the tune2fs operation to complete even in the face of errors. This
-option is useful when removing the
+Force the tune2fs operation to complete even in the face of errors. This
+option is useful when removing the
.B has_journal
-filesystem feature from a filesystem which has
+file system feature from a file system which has
an external journal (or is corrupted
-such that it appears to have an external journal), but that
-external journal is not available. If the filesystem appears to require
+such that it appears to have an external journal), but that
+external journal is not available. If the file system appears to require
journal replay, the
.B \-f
flag must be specified twice to proceed.
.sp
.B WARNING:
-Removing an external journal from a filesystem which was not cleanly unmounted
+Removing an external journal from a file system which was not cleanly unmounted
without first replaying the external journal can result in
-severe data loss and filesystem corruption.
+severe data loss and file system corruption.
.TP
.BI \-g " group"
-Set the group which can use the reserved filesystem blocks.
-The
+Set the group which can use the reserved file system blocks.
+The
.I group
parameter can be a numerical gid or a group name. If a group name is given,
it is converted to a numerical gid before it is stored in the superblock.
.TP
.B \-i " \fIinterval-between-checks\fR[\fBd\fR|\fBm\fR|\fBw\fR]"
-Adjust the maximal time between two filesystem checks.
+Adjust the maximal time between two file system checks.
No suffix or
.B d
will interpret the number
.B w
as weeks. A value of zero will disable the time-dependent checking.
.sp
-It is strongly recommended that either
+There are pros and cons to disabling these periodic checks; see the
+discussion under the
.B \-c
-(mount-count-dependent) or
-.B \-i
-(time-dependent) checking be enabled to force periodic full
-.BR e2fsck (8)
-checking of the filesystem. Failure to do so may lead to filesystem
-corruption (due to bad disks, cables, memory, or kernel bugs) going
-unnoticed, ultimately resulting in data loss or corruption.
+(mount-count-dependent check) option for details.
.TP
.B \-I
Change the inode size used by the file system. This requires rewriting
.BR e2fsck (8).
This operation can also take a while and the file system can be
corrupted and data lost if it is interrupted while in the middle of
-converting the file system.
+converting the file system. Backing up the file system before changing
+inode size is recommended.
+.IP
+File systems with an inode size of 128 bytes do not support timestamps
+beyond January 19, 2038. Inodes which are 256 bytes or larger will
+support extended timestamps, project id's, and the ability to store some
+extended attributes in the inode table for improved performance.
.TP
.B \-j
-Add an ext3 journal to the filesystem. If the
+Add an ext3 journal to the file system. If the
.B \-J
option is not specified, the default journal parameters will be used to create
-an appropriately sized journal (given the size of the filesystem)
-stored within the filesystem. Note that you must be using a kernel
+an appropriately sized journal (given the size of the file system)
+stored within the file system. Note that you must be using a kernel
which has ext3 support in order to actually make use of the journal.
.IP
-If this option is used to create a journal on a mounted filesystem, an
+If this option is used to create a journal on a mounted file system, an
immutable file,
.BR .journal ,
-will be created in the top-level directory of the filesystem, as it is
-the only safe way to create the journal inode while the filesystem is
+will be created in the top-level directory of the file system, as it is
+the only safe way to create the journal inode while the file system is
mounted. While the ext3 journal is visible, it is not safe to
-delete it, or modify it while the filesystem is mounted; for this
+delete it, or modify it while the file system is mounted; for this
reason the file is marked immutable.
-While checking unmounted filesystems,
+While checking unmounted file systems,
.BR e2fsck (8)
-will automatically move
+will automatically move
.B .journal
-files to the invisible, reserved journal inode. For all filesystems
-except for the root filesystem, this should happen automatically and
-naturally during the next reboot cycle. Since the root filesystem is
+files to the invisible, reserved journal inode. For all file systems
+except for the root file system, this should happen automatically and
+naturally during the next reboot cycle. Since the root file system is
mounted read-only,
.BR e2fsck (8)
must be run from a rescue floppy in order to effect this transition.
.IP
On some distributions, such as Debian, if an initial ramdisk is used,
-the initrd scripts will automatically convert an ext2 root filesystem
-to ext3 if the
-.BR /etc/fstab
-file specifies the ext3 filesystem for the root filesystem in order to
+the initrd scripts will automatically convert an ext2 root file system
+to ext3 if the
+.B /etc/fstab
+file specifies the ext3 file system for the root file system in order to
avoid requiring the use of a rescue floppy to add an ext3 journal to
-the root filesystem.
+the root file system.
.TP
.BR \-J " journal-options"
Override the default ext3 journal parameters. Journal options are comma
.RS 1.2i
.TP
.BI size= journal-size
-Create a journal stored in the filesystem of size
+Create a journal stored in the file system of size
.I journal-size
-megabytes. The size of the journal must be at least 1024 filesystem blocks
+megabytes. The size of the journal must be at least 1024 file system blocks
(i.e., 1MB if using 1k blocks, 4MB if using 4k blocks, etc.)
-and may be no more than 10,240,000 filesystem blocks.
-There must be enough free space in the filesystem to create a journal of
+and may be no more than 10,240,000 file system blocks.
+There must be enough free space in the file system to create a journal of
that size.
.TP
+.BI fast_commit_size= fast-commit-size
+Create an additional fast commit journal area of size
+.I fast-commit-size
+kilobytes.
+This option is only valid if
+.B fast_commit
+feature is enabled
+on the file system. If this option is not specified and if
+.B fast_commit
+feature is turned on, fast commit area size defaults to
+.I journal-size
+/ 64 megabytes. The total size of the journal with
+.B fast_commit
+feature set is
+.I journal-size
++ (
+.I fast-commit-size
+* 1024) megabytes. The total journal size may be no more than
+10,240,000 file system blocks or half the total file system size
+(whichever is smaller).
+.TP
.BI location =journal-location
Specify the location of the journal. The argument
.I journal-location
beginning of the file system.
@JDEV@.TP
@JDEV@.BI device= external-journal
-@JDEV@Attach the filesystem to the journal block device located on
+@JDEV@Attach the file system to the journal block device located on
@JDEV@.IR external-journal .
-@JDEV@The external
+@JDEV@The external
@JDEV@journal must have been already created using the command
@JDEV@.IP
-@JDEV@.B mke2fs -O journal_dev
+@JDEV@.B mke2fs -O journal_dev
@JDEV@.I external-journal
@JDEV@.IP
@JDEV@Note that
@JDEV@.I external-journal
@JDEV@must be formatted with the same block
-@JDEV@size as filesystems which will be using it.
+@JDEV@size as file systems which will be using it.
@JDEV@In addition, while there is support for attaching
-@JDEV@multiple filesystems to a single external journal,
-@JDEV@the Linux kernel and
+@JDEV@multiple file systems to a single external journal,
+@JDEV@the Linux kernel and
@JDEV@.BR e2fsck (8)
@JDEV@do not currently support shared external journals yet.
@JDEV@.IP
@JDEV@.IP
@JDEV@Only one of the
@JDEV@.BR size " or " device
-@JDEV@options can be given for a filesystem.
+@JDEV@options can be given for a file system.
.TP
.B \-l
-List the contents of the filesystem superblock, including the current
+List the contents of the file system superblock, including the current
values of the parameters that can be set via this program.
.TP
.BI \-L " volume-label"
-Set the volume label of the filesystem.
-Ext2 filesystem labels can be at most 16 characters long; if
-.I volume-label
-is longer than 16 characters,
+Set the volume label of the file system.
+Ext2 file system labels can be at most 16 characters long; if
+.I volume-label
+is longer than 16 characters,
.B tune2fs
will truncate it and print a warning. The volume label can be used
by
.BR /dev/hda5 .
.TP
.BI \-m " reserved-blocks-percentage"
-Set the percentage of the filesystem which may only be allocated
-by privileged processes. Reserving some number of filesystem blocks
-for use by privileged processes is done
-to avoid filesystem fragmentation, and to allow system
-daemons, such as
+Set the percentage of the file system which may only be allocated
+by privileged processes. Reserving some number of file system blocks
+for use by privileged processes is done
+to avoid file system fragmentation, and to allow system
+daemons, such as
.BR syslogd (8),
-to continue to function correctly after non-privileged processes are
-prevented from writing to the filesystem. Normally, the default percentage
+to continue to function correctly after non-privileged processes are
+prevented from writing to the file system. Normally, the default percentage
of reserved blocks is 5%.
.TP
.BI \-M " last-mounted-directory"
-Set the last-mounted directory for the filesystem.
+Set the last-mounted directory for the file system.
.TP
.BR \-o " [^]\fImount-option\fR[,...]"
-Set or clear the indicated default mount options in the filesystem.
-Default mount options can be overridden by mount options specified
-either in
+Set or clear the indicated default mount options in the file system.
+Default mount options can be overridden by mount options specified
+either in
.BR /etc/fstab (5)
or on the command line arguments to
-.BR mount (8).
+.BR mount (8).
Older kernels may not support this feature; in particular,
kernels which predate 2.4.20 will almost certainly ignore the
default mount options field in the superblock.
.IP
More than one mount option can be cleared or set by separating
-features with commas. Mount options prefixed with a
-caret character ('^') will be cleared in the filesystem's superblock;
-mount options without a prefix character or prefixed with a plus
-character ('+') will be added to the filesystem.
+features with commas. Mount options prefixed with a
+caret character ('^') will be cleared in the file system's superblock;
+mount options without a prefix character or prefixed with a plus
+character ('+') will be added to the file system.
.IP
The following mount options can be set or cleared using
.BR tune2fs :
.RS 1.2i
.TP
.B debug
-Enable debugging code for this filesystem.
+Enable debugging code for this file system.
.TP
.B bsdgroups
Emulate BSD behavior when creating new files: they will take the group-id
of the directory in which they were created. The standard System V behavior
is the default, where newly created files take on the fsgid of the current
-process, unless the directory has the setgid bit set, in which case it takes
-the gid from the parent directory, and also gets the setgid bit set if it is
+process, unless the directory has the setgid bit set, in which case it takes
+the gid from the parent directory, and also gets the setgid bit set if it is
a directory itself.
.TP
.B user_xattr
older kernels which only store and expect 16-bit values.
.TP
.B journal_data
-When the filesystem is mounted with journalling enabled, all data
+When the file system is mounted with journaling enabled, all data
(not just metadata) is committed into the journal prior to being written
-into the main filesystem.
+into the main file system.
.TP
.B journal_data_ordered
-When the filesystem is mounted with journalling enabled, all data is forced
-directly out to the main file system prior to its metadata being committed
+When the file system is mounted with journaling enabled, all data is forced
+directly out to the main file system prior to its metadata being committed
to the journal.
.TP
.B journal_data_writeback
-When the filesystem is mounted with journalling enabled, data may be
-written into the main filesystem after its metadata has been committed
+When the file system is mounted with journaling enabled, data may be
+written into the main file system after its metadata has been committed
to the journal. This may increase throughput, however, it may allow old
data to appear in files after a crash and journal recovery.
.TP
.RE
.TP
.BR \-O " [^]\fIfeature\fR[,...]"
-Set or clear the indicated filesystem features (options) in the filesystem.
-More than one filesystem feature can be cleared or set by separating
-features with commas. Filesystem features prefixed with a
-caret character ('^') will be cleared in the filesystem's superblock;
-filesystem features without a prefix character or prefixed with a plus
-character ('+') will be added to the filesystem. For a detailed
+Set or clear the indicated file system features (options) in the file system.
+More than one file system feature can be cleared or set by separating
+features with commas. File System features prefixed with a
+caret character ('^') will be cleared in the file system's superblock;
+file system features without a prefix character or prefixed with a plus
+character ('+') will be added to the file system. For a detailed
description of the file system features, please see the man page
.BR ext4 (5).
.IP
-The following filesystem features can be set or cleared using
+The following file system features can be set or cleared using
.BR tune2fs :
.RS 1.2i
.TP
+.B 64bit
+Enable the file system to be larger than 2^32 blocks.
+.TP
+.B casefold
+Enable support for file system level casefolding.
+.B Tune2fs
+currently only supports setting this file system feature.
+.TP
.B dir_index
Use hashed b-trees to speed up lookups for large directories.
.TP
.B dir_nlink
Allow more than 65000 subdirectories per directory.
.TP
+.B ea_inode
+Allow the value of each extended attribute to be placed in the data blocks of a
+separate inode if necessary, increasing the limit on the size and number of
+extended attributes per file.
+.B Tune2fs
+currently only supports setting this file system feature.
+.TP
.B encrypt
-Enable file system level encryption.
+Enable support for file system level encryption.
.B Tune2fs
-currently only supports setting this filesystem feature.
+currently only supports setting this file system feature.
.TP
.B extent
Enable the use of extent trees to store the location of data blocks in inodes.
.B Tune2fs
-currently only supports setting this filesystem feature.
+currently only supports setting this file system feature.
.TP
.B extra_isize
Enable the extended inode fields used by ext4.
enabled.
.TP
.B has_journal
-Use a journal to ensure filesystem consistency even across unclean shutdowns.
-Setting the filesystem feature is equivalent to using the
+Use a journal to ensure file system consistency even across unclean shutdowns.
+Setting the file system feature is equivalent to using the
.B \-j
option.
.TP
+.TP
+.B fast_commit
+Enable fast commit journaling feature to improve fsync latency.
+.TP
+.B large_dir
+Increase the limit on the number of files per directory.
+.B Tune2fs
+currently only supports setting this file system feature.
+.TP
.B huge_file
Support files larger than 2 terabytes in size.
.TP
.B large_file
-Filesystem can contain files that are greater than 2GB.
+File System can contain files that are greater than 2GB.
.TP
.B metadata_csum
Store a checksum to protect the contents in each metadata block.
.TP
+.B metadata_csum_seed
+Allow the file system to store the metadata checksum seed in the
+superblock, enabling the administrator to change the UUID of a file system
+using the
+.B metadata_csum
+feature while it is mounted.
+.TP
.B mmp
Enable or disable multiple mount protection (MMP) feature.
.TP
Reserve space so the block group descriptor table may grow in the
future.
.B Tune2fs
-only supports clearing this filesystem feature.
+only supports clearing this file system feature.
.TP
.B sparse_super
-Limit the number of backup superblocks to save space on large filesystems.
+Limit the number of backup superblocks to save space on large file systems.
.B Tune2fs
-currently only supports setting this filesystem feature.
+currently only supports setting this file system feature.
+.TP
+.B stable_inodes
+Prevent the file system from being shrunk or having its UUID changed, in order to
+allow the use of specialized encryption settings that make use of the inode
+numbers and UUID.
+.B Tune2fs
+currently only supports setting this file system feature.
.TP
.B uninit_bg
Allow the kernel to initialize bitmaps and inode tables lazily, and to
-keep a high watermark for the unused inodes in a filesystem, to reduce
+keep a high watermark for the unused inodes in a file system, to reduce
.BR e2fsck (8)
time. The first e2fsck run after enabling this feature will take the
full time, but subsequent e2fsck runs will take only a fraction of the
original time, depending on how full the file system is.
+.TP
+.B verity
+Enable support for verity protected files.
+.B Tune2fs
+currently only supports setting this file system feature.
.RE
.IP
-After setting or clearing
+After setting or clearing
.BR sparse_super ,
.BR uninit_bg ,
.BR filetype ,
or
.B resize_inode
-filesystem features,
+file system features,
the file system may require being checked using
.BR e2fsck (8)
-to return the filesystem to a consistent state.
+to return the file system to a consistent state.
.B Tune2fs
will print a message requesting that the system administrator run
.BR e2fsck (8)
-if necessary. After setting the
+if necessary. After setting the
.B dir_index
-feature,
+feature,
.B e2fsck -D
can be run to convert existing directories to the hashed B-tree format.
-Enabling certain filesystem features may prevent the filesystem from being
+Enabling certain file system features may prevent the file system from being
mounted by kernels which do not support those features. In particular, the
-.BR uninit_bg
+.B uninit_bg
and
-.BR flex_bg
-features are only supported by the ext4 filesystem.
-.TP
-.BI \-p " mmp_check_interval"
-Set the desired MMP check interval in seconds. It is 5 seconds by default.
+.B flex_bg
+features are only supported by the ext4 file system.
.TP
.BI \-r " reserved-blocks-count"
-Set the number of reserved filesystem blocks.
+Set the number of reserved file system blocks.
.TP
.BI \-Q " quota-options"
Sets 'quota' feature on the superblock and works on the quota files for the
given quota type. Quota options could be one or more of the following:
.RS 1.2i
.TP
-.BR [^]usrquota
+.B [^]usrquota
Sets/clears user quota inode in the superblock.
.TP
-.BR [^]grpquota
+.B [^]grpquota
Sets/clears group quota inode in the superblock.
.TP
-.BR [^]prjquota
+.B [^]prjquota
Sets/clears project quota inode in the superblock.
.RE
.TP
.BI \-T " time-last-checked"
-Set the time the filesystem was last checked using
+Set the time the file system was last checked using
.BR e2fsck .
The time is interpreted using the current (local) timezone.
This can be useful in scripts which use a Logical Volume Manager to make
-a consistent snapshot of a filesystem, and then check the filesystem
-during off hours to make sure it hasn't been corrupted due to
-hardware problems, etc. If the filesystem was clean, then this option can
-be used to set the last checked time on the original filesystem. The format
-of
+a consistent snapshot of a file system, and then check the file system
+during off hours to make sure it hasn't been corrupted due to
+hardware problems, etc. If the file system was clean, then this option can
+be used to set the last checked time on the original file system. The format
+of
.I time-last-checked
is the international date format, with an optional time specifier, i.e.
-YYYYMMDD[HH[MM[SS]]]. The keyword
+YYYYMMDD[HH[MM[SS]]]. The keyword
.B now
-is also accepted, in which case the last checked time will be set to the
+is also accepted, in which case the last checked time will be set to the
current time.
.TP
.BI \-u " user"
-Set the user who can use the reserved filesystem blocks.
+Set the user who can use the reserved file system blocks.
.I user
-can be a numerical uid or a user name. If a user name is given, it
+can be a numerical uid or a user name. If a user name is given, it
is converted to a numerical uid before it is stored in the superblock.
.TP
.BI \-U " UUID"
-Set the universally unique identifier (UUID) of the filesystem to
+Set the universally unique identifier (UUID) of the file system to
.IR UUID .
-The format of the UUID is a series of hex digits separated by hyphens,
-like this:
-"c1b9d5a2-f162-11cf-9ece-0020afc76f16".
-The
+The format of the UUID is a series of hex digits separated by hyphens,
+like this:
+"c1b9d5a2-f162-11cf-9ece-0020afc76f16".
+The
.I UUID
parameter may also be one of the following:
.RS 1.2i
.TP
.I clear
-clear the filesystem UUID
+clear the file system UUID
.TP
.I random
generate a new randomly-generated UUID
Time-dependent checking was added by Uwe Ohse <uwe@tirka.gun.de>.
.SH AVAILABILITY
.B tune2fs
-is part of the e2fsprogs package and is available from
+is part of the e2fsprogs package and is available from
http://e2fsprogs.sourceforge.net.
.SH SEE ALSO
.BR debugfs (8),
git://git.whamcloud.com / tools / e2fsprogs.git / blobdiff