.\"
.TH MKE2FS 8 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@"
.SH NAME
-mke2fs \- create an ext2/ext3/ext4 filesystem
+mke2fs \- create an ext2/ext3/ext4 file system
.SH SYNOPSIS
.B mke2fs
[
.I block-size
]
[
-.B \-D
+.B \-C
+.I cluster-size
+]
+[
+.B \-d
+.I root-directory
]
[
-.B \-f
-.I fragment-size
+.B \-D
]
[
.B \-g
.I number-of-inodes
]
[
-.B \-d
-.I root-directory
-]
-[
.B \-n
]
[
@JDEV@]
.SH DESCRIPTION
.B mke2fs
-is used to create an ext2, ext3, or ext4 filesystem, usually in a disk
+is used to create an ext2, ext3, or ext4 file system, usually in a disk
partition (or file) named by
.IR device .
.PP
.B mkfs.ext4
will create a file system for use with ext4, and so on.
.PP
-The defaults of the parameters for the newly created filesystem, if not
+The defaults of the parameters for the newly created file system, if not
overridden by the options listed below, are controlled by the
.B /etc/mke2fs.conf
configuration file. See the
.SH OPTIONS
.TP
.BI \-b " block-size"
-Specify the size of blocks in bytes. Valid block-size values are 1024,
-2048 and 4096 bytes per block. If omitted,
-block-size is heuristically determined by the filesystem size and
-the expected usage of the filesystem (see the
+Specify the size of blocks in bytes. Valid block-size values are powers of two
+from 1024 up to 65536 (however note that the kernel is able to mount only
+file systems with block-size smaller or equal to the system page size - 4k on
+x86 systems, up to 64k on ppc64 or aarch64 depending on kernel configuration).
+If omitted, block-size is heuristically determined by the file system size and
+the expected usage of the file system (see the
.B \-T
-option). If
+option). In most common cases, the default block size is 4k. If
.I block-size
is preceded by a negative sign ('-'), then
.B mke2fs
test is used instead of a fast read-only test.
.TP
.B \-C " cluster-size"
-Specify the size of cluster in bytes for filesystems using the bigalloc
+Specify the size of cluster in bytes for file systems using the bigalloc
feature. Valid cluster-size values are from 2048 to 256M bytes per
cluster. This can only be specified if the bigalloc feature is
enabled. (See the
man page for more details about bigalloc.) The default cluster size if
bigalloc is enabled is 16 times the block size.
.TP
+.BI \-d " root-directory"
+Copy the contents of the given directory into the root directory of the
+file system.
+.TP
.B \-D
Use direct I/O when writing to the disk. This avoids mke2fs dirtying a
lot of buffer cache memory, which may impact other applications running
.TP
.BI \-e " error-behavior"
Change the behavior of the kernel code when errors are detected.
-In all cases, a filesystem error will cause
+In all cases, a file system error will cause
.BR e2fsck (8)
-to check the filesystem on the next boot.
+to check the file system on the next boot.
.I error-behavior
can be one of the following:
.RS 1.2i
Continue normal execution.
.TP
.B remount-ro
-Remount filesystem read-only.
+Remount file system read-only.
.TP
.B panic
Cause a kernel panic.
.RE
.TP
.BI \-E " extended-options"
-Set extended options for the filesystem. Extended options are comma
+Set extended options for the file system. Extended options are comma
separated, and may take an argument using the equals ('=') sign. The
.B \-E
option used to be
The following extended options are supported:
.RS 1.2i
.TP
+.BI encoding= encoding-name
+Enable the
+.I casefold
+feature in the super block and set
+.I encoding-name
+as the encoding to be used. If
+.I encoding-name
+is not specified, the encoding defined in
+.BR mke2fs.conf (5)
+is used.
+.TP
+.BI encoding_flags= encoding-flags
+Define parameters for file name character encoding operations. If a
+flag is not changed using this parameter, its default value is used.
+.I encoding-flags
+should be a comma-separated lists of flags to be enabled. To disable a
+flag, add it to the list with the prefix "no".
+
+The only flag that can be set right now is
+.I strict
+which means that invalid strings should be rejected by the file system.
+In the default configuration, the
+.I strict
+flag is disabled.
+.TP
.BI mmp_update_interval= interval
Adjust the initial MMP update interval to
.I interval
feature be enabled.
.TP
.BI stride= stride-size
-Configure the filesystem for a RAID array with
+Configure the file system for a RAID array with
.I stride-size
-filesystem blocks. This is the number of blocks read or written to disk
+file system blocks. This is the number of blocks read or written to disk
before moving to the next disk, which is sometimes referred to as the
.I chunk size.
-This mostly affects placement of filesystem metadata like bitmaps at
+This mostly affects placement of file system metadata like bitmaps at
.B mke2fs
time to avoid placing them on a single disk, which can hurt performance.
It may also be used by the block allocator.
.TP
.BI stripe_width= stripe-width
-Configure the filesystem for a RAID array with
+Configure the file system for a RAID array with
.I stripe-width
-filesystem blocks per stripe. This is typically stride-size * N, where
+file system blocks per stripe. This is typically stride-size * N, where
N is the number of data-bearing disks in the RAID (e.g. for RAID 5 there is one
parity disk, so N will be the number of disks in the array minus 1).
This allows the block allocator to prevent read-modify-write of the
parity in a RAID stripe if possible when the data is written.
.TP
.BI offset= offset
-Create the filesystem at an offset from the beginning of the device or
+Create the file system at an offset from the beginning of the device or
file. This can be useful when creating disk images for virtual machines.
.TP
.BI resize= max-online-resize
Reserve enough space so that the block group descriptor table can grow
-to support a filesystem that has
+to support a file system that has
.I max-online-resize
blocks.
.TP
If enabled and the uninit_bg feature is enabled, the inode table will
not be fully initialized by
.BR mke2fs .
-This speeds up filesystem
+This speeds up file system
initialization noticeably, but it requires the kernel to finish
-initializing the filesystem in the background when the filesystem is
+initializing the file system in the background when the file system is
first mounted. If the option value is omitted, it defaults to 1 to
enable lazy inode table zeroing.
.TP
.B lazy_journal_init\fR[\fB= \fI<0 to disable, 1 to enable>\fR]
If enabled, the journal inode will not be fully zeroed out by
.BR mke2fs .
-This speeds up filesystem initialization noticeably, but carries some
+This speeds up file system initialization noticeably, but carries some
small risk if the system crashes before the journal has been overwritten
entirely one time. If the option value is omitted, it defaults to 1 to
enable lazy journal inode zeroing.
.TP
+.B assume_storage_prezeroed\fR[\fB= \fI<0 to disable, 1 to enable>\fR]
+If enabled,
+.BR mke2fs
+assumes that the storage device has been prezeroed, skips zeroing the journal
+and inode tables, and annotates the block group flags to signal that the inode
+table has been zeroed.
+.TP
+.B no_copy_xattrs
+Normally
+.B mke2fs
+will copy the extended attributes of the files in the directory
+hierarchy specified via the (optional)
+.B \-d
+option. This will disable the copy and leaves the files in the newly
+created file system without any extended attributes.
+.TP
.BI num_backup_sb= <0|1|2>
If the
.B sparse_super2
set by default to the UID and GID of the user running the mke2fs command.
The \fBroot_owner=\fR option allows explicitly specifying these values,
and avoid side-effects for users that do not expect the contents of the
-filesystem to change based on the user running \fBmke2fs\fR.
+file system to change based on the user running \fBmke2fs\fR.
.TP
.B test_fs
-Set a flag in the filesystem superblock indicating that it may be
-mounted using experimental kernel code, such as the ext4dev filesystem.
+Set a flag in the file system superblock indicating that it may be
+mounted using experimental kernel code, such as the ext4dev file system.
+.TP
+.BI orphan_file_size= size
+Set size of the file for tracking unlinked but still open inodes and inodes
+with truncate in progress. Larger file allows for better scalability, reserving
+a few blocks per cpu is ideal.
.TP
-.BI discard
+.B discard
Attempt to discard blocks at mkfs time (discarding blocks initially is useful
on solid state devices and sparse / thin-provisioned storage). When the device
advertises that discard also zeroes data (any subsequent read after the discard
and before write returns zero), then mark all not-yet-zeroed inode tables as
-zeroed. This significantly speeds up filesystem initialization. This is set
+zeroed. This significantly speeds up file system initialization. This is set
as default.
.TP
-.BI nodiscard
+.B nodiscard
Do not attempt to discard blocks at mkfs time.
-@QUOTA_MAN_COMMENT@.TP
-@QUOTA_MAN_COMMENT@.BI quotatype
-@QUOTA_MAN_COMMENT@Specify which quota type ('usr' or 'grp') is to be
-@QUOTA_MAN_COMMENT@initialized. This option has effect only if the
-@QUOTA_MAN_COMMENT@.B quota
-@QUOTA_MAN_COMMENT@feature is set. Without this extended option, the default
-@QUOTA_MAN_COMMENT@behavior is to initialize both user and group quotas.
-.RE
.TP
-.BI \-f " fragment-size"
-Specify the size of fragments in bytes.
+.B quotatype
+Specify the which quota types (usrquota, grpquota, prjquota) which
+should be enabled in the created file system. The argument of this
+extended option should be a colon separated list. This option has
+effect only if the
+.B quota
+feature is set. The default quota types to be initialized if this
+option is not specified is both user and group quotas. If the project
+feature is enabled that project quotas will be initialized as well.
+.RE
.TP
.B \-F
Force
.B mke2fs
-to create a filesystem, even if the specified device is not a partition
+to create a file system, even if the specified device is not a partition
on a block special device, or if other parameters do not make sense.
In order to force
.B mke2fs
-to create a filesystem even if the filesystem appears to be in use
+to create a file system even if the file system appears to be in use
or is mounted (a truly dangerous thing to do), this option must be
specified twice.
.TP
.BI \-g " blocks-per-group"
Specify the number of blocks in a block group. There is generally no
reason for the user to ever set this parameter, as the default is optimal
-for the filesystem. (For administrators who are creating
-filesystems on RAID arrays, it is preferable to use the
+for the file system. (For administrators who are creating
+file systems on RAID arrays, it is preferable to use the
.I stride
RAID parameter as part of the
.B \-E
.BI \-G " number-of-groups"
Specify the number of block groups that will be packed together to
create a larger virtual block group (or "flex_bg group") in an
-ext4 filesystem. This improves meta-data locality and performance
+ext4 file system. This improves meta-data locality and performance
on meta-data heavy workloads. The number of groups must be a power
-of 2 and may only be specified if the
+of 2 and may only be specified if the
.B flex_bg
-filesystem feature is enabled.
+file system feature is enabled.
.TP
.BI \-i " bytes-per-inode"
Specify the bytes/inode ratio.
bytes of space on the disk. The larger the
.I bytes-per-inode
ratio, the fewer inodes will be created. This value generally shouldn't
-be smaller than the blocksize of the filesystem, since in that case more
+be smaller than the blocksize of the file system, since in that case more
inodes would be made than can ever be used. Be warned that it is not
-possible to change this ratio on a filesystem after it is created, so be
+possible to change this ratio on a file system after it is created, so be
careful deciding the correct value for this parameter. Note that resizing
-a filesystem changes the numer of inodes to maintain this ratio.
+a file system changes the number of inodes to maintain this ratio.
.TP
.BI \-I " inode-size"
Specify the size of each inode in bytes.
value must be a power of 2 larger or equal to 128. The larger the
.I inode-size
the more space the inode table will consume, and this reduces the usable
-space in the filesystem and can also negatively impact performance.
+space in the file system and can also negatively impact performance.
It is not
-possible to change this value after the filesystem is created.
+possible to change this value after the file system is created.
.IP
-In kernels after 2.6.10 and some
-earlier vendor kernels it is possible to utilize inodes larger than
-128 bytes to store
-extended attributes for improved performance.
-Extended attributes
-stored in large inodes are not visible with older kernels, and such
-filesystems will not be mountable with 2.4 kernels at all.
+File systems with an inode size of 128 bytes do not support timestamps
+beyond January 19, 2038. Inodes which are 256 bytes or larger will
+support extended timestamps, project id's, and the ability to store some
+extended attributes in the inode table for improved performance.
.IP
The default inode size is controlled by the
.BR mke2fs.conf (5)
will be 128 bytes.
.TP
.B \-j
-Create the filesystem with an ext3 journal. If the
+Create the file system with an ext3 journal. If the
.B \-J
option is not specified, the default journal parameters will be used to
-create an appropriately sized journal (given the size of the filesystem)
-stored within the filesystem. Note that you must be using a kernel
+create an appropriately sized journal (given the size of the file system)
+stored within the file system. Note that you must be using a kernel
which has ext3 support in order to actually make use of the journal.
.TP
.BI \-J " journal-options"
.RS 1.2i
.TP
.BI size= journal-size
-Create an internal journal (i.e., stored inside the filesystem) of size
+Create an internal journal (i.e., stored inside the file system) of size
.I journal-size
megabytes.
-The size of the journal must be at least 1024 filesystem blocks
+The size of the journal must be at least 1024 file system blocks
(i.e., 1MB if using 1k blocks, 4MB if using 4k blocks, etc.)
-and may be no more than 10,240,000 filesystem blocks or half the total
+and may be no more than 10,240,000 file system blocks or half the total
file system size (whichever is smaller)
.TP
+.BI fast_commit_size= fast-commit-size
+Create an additional fast commit journal area of size
+.I fast-commit-size
+kilobytes.
+This option is only valid if
+.B fast_commit
+feature is enabled
+on the file system. If this option is not specified and if
+.B fast_commit
+feature is turned on, fast commit area size defaults to
+.I journal-size
+/ 64 megabytes. The total size of the journal with
+.B fast_commit
+feature set is
+.I journal-size
++ (
+.I fast-commit-size
+* 1024) megabytes. The total journal size may be no more than
+10,240,000 file system blocks or half the total file system size
+(whichever is smaller).
+.TP
.BI location =journal-location
Specify the location of the journal. The argument
.I journal-location
beginning of the file system.
@JDEV@.TP
@JDEV@.BI device= external-journal
-@JDEV@Attach the filesystem to the journal block device located on
+@JDEV@Attach the file system to the journal block device located on
@JDEV@.IR external-journal .
@JDEV@The external
@JDEV@journal must already have been created using the command
@JDEV@Note that
@JDEV@.I external-journal
@JDEV@must have been created with the
-@JDEV@same block size as the new filesystem.
+@JDEV@same block size as the new file system.
@JDEV@In addition, while there is support for attaching
-@JDEV@multiple filesystems to a single external journal,
+@JDEV@multiple file systems to a single external journal,
@JDEV@the Linux kernel and
@JDEV@.BR e2fsck (8)
@JDEV@do not currently support shared external journals yet.
@JDEV@.IP
@JDEV@Only one of the
@JDEV@.BR size " or " device
-@JDEV@options can be given for a filesystem.
+@JDEV@options can be given for a file system.
.TP
.BI \-l " filename"
Read the bad blocks list from
program.
.TP
.BI \-L " new-volume-label"
-Set the volume label for the filesystem to
+Set the volume label for the file system to
.IR new-volume-label .
The maximum length of the
volume label is 16 bytes.
.TP
.BI \-m " reserved-blocks-percentage"
-Specify the percentage of the filesystem blocks reserved for
+Specify the percentage of the file system blocks reserved for
the super-user. This avoids fragmentation, and allows root-owned
daemons, such as
.BR syslogd (8),
to continue to function correctly after non-privileged processes are
-prevented from writing to the filesystem. The default percentage
+prevented from writing to the file system. The default percentage
is 5%.
.TP
.BI \-M " last-mounted-directory"
-Set the last mounted directory for the filesystem. This might be useful
+Set the last mounted directory for the file system. This might be useful
for the sake of utilities that key off of the last mounted directory to
-determine where the filesystem should be mounted.
+determine where the file system should be mounted.
.TP
.B \-n
Causes
.B mke2fs
-to not actually create a filesystem, but display what it
-would do if it were to create a filesystem. This can be used to
+to not actually create a file system, but display what it
+would do if it were to create a file system. This can be used to
determine the location of the backup superblocks for a particular
-filesystem, so long as the
+file system, so long as the
.B mke2fs
parameters that were passed when the
-filesystem was originally created are used again. (With the
+file system was originally created are used again. (With the
.B \-n
option added, of course!)
.TP
.BI \-N " number-of-inodes"
Overrides the default calculation of the number of inodes that should be
-reserved for the filesystem (which is based on the number of blocks and
+reserved for the file system (which is based on the number of blocks and
the
.I bytes-per-inode
ratio). This allows the user to specify the number
of desired inodes directly.
.TP
-.BI \-d " root-directory"
-Add the files from the root-directory to the filesystem.
-.TP
.BI \-o " creator-os"
Overrides the default value of the "creator operating system" field of the
-filesystem. The creator field is set by default to the name of the OS the
+file system. The creator field is set by default to the name of the OS the
.B mke2fs
executable was compiled for.
.TP
.B "\-O \fR[^]\fIfeature\fR[,...]"
-Create a filesystem with the given features (filesystem options),
-overriding the default filesystem options. The features that are
+Create a file system with the given features (file system options),
+overriding the default file system options. The features that are
enabled by default are specified by the
.I base_features
relation, either in the
.I features
relation found in the
.I [fs_types]
-subsections for the filesystem and usage types. See the
+subsections for the file system and usage types. See the
.BR mke2fs.conf (5)
manual page for more details.
-The filesystem type-specific configuration setting found in the
+The file system type-specific configuration setting found in the
.I [fs_types]
section will override the global default found in
.IR [defaults] .
.sp
-The filesystem feature set will be further edited
+The file system feature set will be further edited
using either the feature set specified by this option,
or if this option is not given, by the
.I default_features
-relation for the filesystem type being created, or in the
+relation for the file system type being created, or in the
.I [defaults]
section of the configuration file.
.sp
-The filesystem feature set is comprised of a list of features, separated
+The file system feature set is comprised of a list of features, separated
by commas, that are to be enabled. To disable a feature, simply
prefix the feature name with a caret ('^') character.
Features with dependencies will not be removed successfully.
-The pseudo-filesystem feature "none" will clear all filesystem features.
+The pseudo-file system feature "none" will clear all file system features.
.TP
For more information about the features which can be set, please see
the manual page
is run in a script.
.TP
.BI \-r " revision"
-Set the filesystem revision for the new filesystem. Note that 1.2
-kernels only support revision 0 filesystems. The default is to
-create revision 1 filesystems.
+Set the file system revision for the new file system. Note that 1.2
+kernels only support revision 0 file systems. The default is to
+create revision 1 file systems.
.TP
.B \-S
-Write superblock and group descriptors only. This is useful if all of
+Write superblock and group descriptors only. This is an extreme
+measure to be taken only in the very unlikely case that all of
the superblock and backup superblocks are corrupted, and a last-ditch
-recovery method is desired. It causes
+recovery method is desired by experienced users. It causes
.B mke2fs
-to reinitialize the
-superblock and group descriptors, while not touching the inode table
-and the block and inode bitmaps. The
+to reinitialize the superblock and group descriptors, while not
+touching the inode table and the block and inode bitmaps. The
.B e2fsck
program should be run immediately after this option is used, and there
-is no guarantee that any data will be salvageable. It is critical to
-specify the correct filesystem blocksize when using this option,
-or there is no chance of recovery.
+is no guarantee that any data will be salvageable. Due to the wide
+variety of possible options to
+.B mke2fs
+that affect the on-disk layout, it is critical to specify exactly
+the same format options, such as blocksize, fs-type, feature flags, and
+other tunables when using this option, or the file system will be further
+corrupted. In some cases, such as file systems that have been resized,
+or have had features enabled after format time, it is impossible to
+overwrite all of the superblocks correctly, and at least some file system
+corruption will occur. It is best to run this on a full copy of the
+file system so other options can be tried if this doesn't work.
.\" .TP
.\" .BI \-t " test"
.\" Check the device for bad blocks before creating the file system
.\" using the specified test.
.TP
.BI \-t " fs-type"
-Specify the filesystem type (i.e., ext2, ext3, ext4, etc.) that is
+Specify the file system type (i.e., ext2, ext3, ext4, etc.) that is
to be created.
If this option is not specified,
.B mke2fs
the command was run (for example, using a name of the form mkfs.ext2,
mkfs.ext3, etc.) or via a default as defined by the
.B /etc/mke2fs.conf
-file. This option controls which filesystem options are used by
+file. This option controls which file system options are used by
default, based on the
.B fstypes
configuration stanza in
.sp
If the
.B \-O
-option is used to explicitly add or remove filesystem options that
-should be set in the newly created filesystem, the
-resulting filesystem may not be supported by the requested
+option is used to explicitly add or remove file system options that
+should be set in the newly created file system, the
+resulting file system may not be supported by the requested
.IR fs-type .
(e.g., "\fBmke2fs \-t ext3 \-O extent /dev/sdXX\fR" will create a
-filesystem that is not supported by the ext3 implementation as found in
+file system that is not supported by the ext3 implementation as found in
the Linux kernel; and "\fBmke2fs \-t ext3 \-O ^has_journal /dev/hdXX\fR"
-will create a filesystem that does not have a journal and hence will not
-be supported by the ext3 filesystem code in the Linux kernel.)
+will create a file system that does not have a journal and hence will not
+be supported by the ext3 file system code in the Linux kernel.)
.TP
.BI \-T " usage-type[,...]"
-Specify how the filesystem is going to be used, so that
+Specify how the file system is going to be used, so that
.B mke2fs
-can choose optimal filesystem parameters for that use. The usage
+can choose optimal file system parameters for that use. The usage
types that are supported are defined in the configuration file
.BR /etc/mke2fs.conf .
The user may specify one or more usage types
.sp
If this option is is not specified,
.B mke2fs
-will pick a single default usage type based on the size of the filesystem to
-be created. If the filesystem size is less than 3 megabytes,
+will pick a single default usage type based on the size of the file system to
+be created. If the file system size is less than 3 megabytes,
.B mke2fs
-will use the filesystem type
+will use the file system type
.IR floppy .
-If the filesystem size is greater than or equal to 3 but less than
+If the file system size is greater than or equal to 3 but less than
512 megabytes,
.BR mke2fs (8)
-will use the filesystem type
+will use the file system type
.IR small .
-If the filesystem size is greater than or equal to 4 terabytes but less than
+If the file system size is greater than or equal to 4 terabytes but less than
16 terabytes,
.BR mke2fs (8)
-will use the filesystem type
+will use the file system type
.IR big .
-If the filesystem size is greater than or equal to 16 terabytes,
+If the file system size is greater than or equal to 16 terabytes,
.BR mke2fs (8)
-will use the filesystem type
+will use the file system type
.IR huge .
Otherwise,
.BR mke2fs (8)
-will use the default filesystem type
+will use the default file system type
.IR default .
.TP
.BI \-U " UUID"
-Create the filesystem with the specified UUID.
+Set the universally unique identifier (UUID) of the file system to
+.IR UUID .
+The format of the UUID is a series of hex digits separated by hyphens,
+like this:
+"c1b9d5a2-f162-11cf-9ece-0020afc76f16".
+The
+.I UUID
+parameter may also be one of the following:
+.RS 1.2i
+.TP
+.I clear
+clear the file system UUID
+.TP
+.I random
+generate a new randomly-generated UUID
+.TP
+.I time
+generate a new time-based UUID
+.RE
.TP
.B \-v
Verbose execution.
WARNING: The undo file cannot be used to recover from a power or system crash.
.SH ENVIRONMENT
.TP
-.BI MKE2FS_SYNC
+.B MKE2FS_SYNC
If set to non-zero integer value, its value is used to determine how often
.BR sync (2)
is called during inode table initialization.
.TP
-.BI MKE2FS_CONFIG
+.B MKE2FS_CONFIG
Determines the location of the configuration file (see
.BR mke2fs.conf (5)).
.TP
-.BI MKE2FS_FIRST_META_BG
+.B MKE2FS_FIRST_META_BG
If set to non-zero integer value, its value is used to determine first meta
block group. This is mostly for debugging purposes.
.TP
-.BI MKE2FS_DEVICE_SECTSIZE
+.B MKE2FS_DEVICE_SECTSIZE
+If set to non-zero integer value, its value is used to determine logical
+sector size of the
+.IR device .
+.TP
+.B MKE2FS_DEVICE_PHYS_SECTSIZE
If set to non-zero integer value, its value is used to determine physical
sector size of the
.IR device .
.TP
-.BI MKE2FS_SKIP_CHECK_MSG
-If set, do not show the message of filesystem automatic check caused by
+.B MKE2FS_SKIP_CHECK_MSG
+If set, do not show the message of file system automatic check caused by
mount count or check interval.
.SH AUTHOR
This version of
.B mke2fs
has been written by Theodore Ts'o <tytso@mit.edu>.
-.SH BUGS
-.B mke2fs
-accepts the
-.B \-f
-option but currently ignores it because the second
-extended file system does not support fragments yet.
-.br
-There may be other ones. Please, report them to the author.
.SH AVAILABILITY
.B mke2fs
is part of the e2fsprogs package and is available from
git://git.whamcloud.com / tools / e2fsprogs.git / blobdiff