.\" -*- nroff -*-
.\" Copyright 1993, 1994, 1995 by Theodore Ts'o. All Rights Reserved.
.\" This file may be copied under the terms of the GNU Public License.
-.\"
+.\"
.TH E2FSCK 8 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@"
.SH NAME
-e2fsck \- check a Linux ext2/ext3 file system
+e2fsck \- check a Linux ext2/ext3/ext4 file system
.SH SYNOPSIS
.B e2fsck
[
-.B \-pacnyrdfkvstDFSV
+.B \-pacnyrdfkvtDFV
]
[
.B \-b
.B \-E
.I extended_options
]
+[
+.B \-z
+.I undo_file
+]
.I device
.SH DESCRIPTION
.B e2fsck
-is used to check a Linux second extended file system (ext2fs).
-.B E2fsck
-also
-supports ext2 filesystems containing a journal, which are
-also sometimes known as ext3 filesystems, by first applying the journal
-to the filesystem before continuing with normal
-.B e2fsck
-processing. After the journal has been applied, a filesystem will
-normally be marked as clean. Hence, for ext3 filesystems,
+is used to check the ext2/ext3/ext4 family of file systems.
+For ext3 and ext4 filesystems that use a journal, if the system has been
+shut down uncleanly without any errors, normally, after replaying the
+committed transactions in the journal, the file system should be
+marked as clean. Hence, for filesystems that use journalling,
.B e2fsck
-will normally run the journal and exit, unless its superblock
+will normally replay the journal and exit, unless its superblock
indicates that further checking is required.
.PP
.I device
-is the device file where the filesystem is stored (e.g.
-.IR /dev/hdc1 ).
+is a block device (e.g.,
+.IR /dev/sdc1 )
+or file containing the file system.
.PP
Note that in general it is not safe to run
.B e2fsck
on mounted filesystems. The only exception is if the
.B \-n
-option is specified, and
-.BR \-c ,
+option is specified, and
+.BR \-c ,
.BR \-l ,
or
.B -L
-options are
+options are
.I not
specified. However, even if it is safe to do so, the results printed by
.B e2fsck
-are not valid if the filesystem is mounted. If
+are not valid if the filesystem is mounted. If
.B e2fsck
-asks whether or not you should check a filesystem which is mounted,
+asks whether or not you should check a filesystem which is mounted,
the only correct answer is ``no''. Only experts who really know what
they are doing should consider answering this question in any other way.
+.PP
+If
+.B e2fsck
+is run in interactive mode (meaning that none of
+.BR \-y ,
+.BR \-n ,
+or
+.BR \-p
+are specified), the program will ask the user to fix each problem found in the
+filesystem. A response of 'y' will fix the error; 'n' will leave the error
+unfixed; and 'a' will fix the problem and all subsequent problems; pressing
+Enter will proceed with the default response, which is printed before the
+question mark. Pressing Control-C terminates e2fsck immediately.
.SH OPTIONS
.TP
-.B \-a
-This option does the same thing as the
+.B \-a
+This option does the same thing as the
.B \-p
option. It is provided for backwards compatibility only; it is
-suggested that people use
-.B \-p
+suggested that people use
+.B \-p
option whenever possible.
.TP
.BI \-b " superblock"
Instead of using the normal superblock, use an alternative superblock
-specified by
+specified by
.IR superblock .
This option is normally used when the primary superblock has been
-corrupted. The location of the backup superblock is dependent on the
-filesystem's blocksize. For filesystems with 1k blocksizes, a backup
-superblock can be found at block 8193; for filesystems with 2k
-blocksizes, at block 16384; and for 4k blocksizes, at block 32768.
+corrupted. The location of backup superblocks is dependent on the
+filesystem's blocksize, the number of blocks per group, and features
+such as
+.BR sparse_super .
.IP
-Additional backup superblocks can be determined by using the
-.B mke2fs
-program using the
+Additional backup superblocks can be determined by using the
+.B mke2fs
+program using the
.B \-n
-option to print out where the superblocks were created. The
-.B \-b
-option to
-.BR mke2fs ,
-which specifies blocksize of the filesystem must be specified in order
-for the superblock locations that are printed out to be accurate.
+option to print out where the superblocks exist, supposing
+.B mke2fs
+is supplied with arguments that are consistent with the filesystem's layout
+(e.g. blocksize, blocks per group,
+.BR sparse_super ,
+etc.).
.IP
-If an alternative superblock is specified and
+If an alternative superblock is specified and
the filesystem is not opened read-only, e2fsck will make sure that the
-primary superblock is updated appropriately upon completion of the
+primary superblock is updated appropriately upon completion of the
filesystem check.
.TP
.BI \-B " blocksize"
-Normally,
+Normally,
.B e2fsck
will search for the superblock at various different
block sizes in an attempt to find the appropriate block size.
-This search can be fooled in some cases. This option forces
+This search can be fooled in some cases. This option forces
.B e2fsck
to only try locating the superblock at a particular blocksize.
-If the superblock is not found,
-.B e2fsck
+If the superblock is not found,
+.B e2fsck
will terminate with a fatal error.
.TP
.B \-c
-This option causes
-.B e2fsck
-to use
+This option causes
+.B e2fsck
+to use
.BR badblocks (8)
program to do a read-only scan of the device in order to find any bad
blocks. If any bad blocks are found, they are added to the bad block
.BI \-C " fd"
This option causes
.B e2fsck
-to write completion information to the specified file descriptor
-so that the progress of the filesystem
-check can be monitored. This option is typically used by programs
+to write completion information to the specified file descriptor
+so that the progress of the filesystem
+check can be monitored. This option is typically used by programs
which are running
.BR e2fsck .
-If the file descriptor specified is 0,
+If the file descriptor number is negative, then absolute value of
+the file descriptor will be used, and the progress information will be
+suppressed initially. It can later be enabled by sending the
+.B e2fsck
+process a SIGUSR1 signal.
+If the file descriptor specified is 0,
.B e2fsck
will print a completion bar as it goes about its business. This requires
that e2fsck is running on a video console or terminal.
filesystem supports directory indexing, or by sorting and compressing
directories for smaller directories, or for filesystems using
traditional linear directories.
+.IP
+Even without the
+.B \-D
+option,
+.B e2fsck
+may sometimes optimize a few directories --- for example, if
+directory indexing is enabled and a directory is not indexed and would
+benefit from being indexed, or if the index structures are corrupted
+and need to be rebuilt. The
+.B \-D
+option forces all directories in the filesystem to be optimized. This can
+sometimes make them a little smaller and slightly faster to search, but
+in practice, you should rarely need to use this option.
+.IP
+The
+.B \-D
+option will detect directory entries with duplicate names in a single
+directory, which e2fsck normally does not enforce for performance reasons.
.TP
.BI \-E " extended_options"
Set e2fsck extended options. Extended options are comma
-separated, and may take an argument using the equals ('=') sign. The
+separated, and may take an argument using the equals ('=') sign. The
following options are supported:
.RS 1.2i
.TP
+.BI clone= dup|zero
+Resolve files with shared blocks in pass 1D by giving each file a private
+copy of the blocks (dup);
+or replacing the shared blocks with private, zero-filled blocks (zero).
+The default is dup.
+.TP
+.BI shared= preserve|lost+found|delete
+Files with shared blocks discovered in pass 1D are cloned and then left
+in place (preserve);
+cloned and then disconnected from their parent directory,
+then reconnected to /lost+found in pass 3 (lost+found);
+or simply deleted (delete). The default is preserve.
+.TP
.BI ea_ver= extended_attribute_version
-Assume the format of the extended attribute blocks in the filesystem is
-the specified version number. The version number may be 1 or 2. The
-default extended attribute version format is 2.
+Set the version of the extended attribute blocks which
+.B e2fsck
+will require while checking the filesystem. The version number may
+be 1 or 2. The default extended attribute version format is 2.
+.TP
+.BI journal_only
+Only replay the journal if required, but do not perform any further checks
+or repairs.
+.TP
+.BI fragcheck
+During pass 1, print a detailed report of any discontiguous blocks for
+files in the filesystem.
+.TP
+.BI discard
+Attempt to discard free blocks and unused inode blocks after the full
+filesystem check (discarding blocks is useful on solid state devices and sparse
+/ thin-provisioned storage). Note that discard is done in pass 5 AFTER the
+filesystem has been fully checked and only if it does not contain recognizable
+errors. However there might be cases where
+.B e2fsck
+does not fully recognize a problem and hence in this case this
+option may prevent you from further manual data recovery.
+.TP
+.BI nodiscard
+Do not attempt to discard free blocks and unused inode blocks. This option is
+exactly the opposite of discard option. This is set as default.
+.TP
+.BI no_optimize_extents
+Do not offer to optimize the extent tree by eliminating unnecessary
+width or depth. This can also be enabled in the options section of
+.BR /etc/e2fsck.conf .
+.TP
+.BI optimize_extents
+Offer to optimize the extent tree by eliminating unnecessary
+width or depth. This is the default unless otherwise specified in
+.BR /etc/e2fsck.conf .
+.TP
+.BI inode_count_fullmap
+Trade off using memory for speed when checking a file system with a
+large number of hard-linked files. The amount of memory required is
+proportional to the number of inodes in the file system. For large file
+systems, this can be gigabytes of memory. (For example, a 40TB file system
+with 2.8 billion inodes will consume an additional 5.7 GB memory if this
+optimization is enabled.) This optimization can also be enabled in the
+options section of
+.BR /etc/e2fsck.conf .
+.TP
+.BI no_inode_count_fullmap
+Disable the
+.B inode_count_fullmap
+optimization. This is the default unless otherwise specified in
+.BR /etc/e2fsck.conf .
+.TP
+.BI readahead_kb
+Use this many KiB of memory to pre-fetch metadata in the hopes of reducing
+e2fsck runtime. By default, this is set to the size of two block groups' inode
+tables (typically 4MiB on a regular ext4 filesystem); if this amount is more
+than 1/50th of total physical memory, readahead is disabled. Set this to zero
+to disable readahead entirely.
+.TP
+.BI bmap2extent
+Convert block-mapped files to extent-mapped files.
+.TP
+.BI fixes_only
+Only fix damaged metadata; do not optimize htree directories or compress
+extent trees. This option is incompatible with the -D and -E bmap2extent
+options.
+.TP
+.BI unshare_blocks
+If the filesystem has shared blocks, with the shared blocks read-only feature
+enabled, then this will unshare all shared blocks and unset the read-only
+feature bit. If there is not enough free space then the operation will fail.
+If the filesystem does not have the read-only feature bit, but has shared
+blocks anyway, then this option will have no effect. Note when using this
+option, if there is no free space to clone blocks, there is no prompt to
+delete files and instead the operation will fail.
+.IP
+Note that unshare_blocks implies the "-f" option to ensure that all passes
+are run. Additionally, if "-n" is also specified, e2fsck will simulate trying
+to allocate enough space to deduplicate. If this fails, the exit code will
+be non-zero.
.RE
.TP
.B \-f
.TP
.B \-F
Flush the filesystem device's buffer caches before beginning. Only
-really useful for doing
-.B e2fsck
+really useful for doing
+.B e2fsck
time trials.
@JDEV@.TP
@JDEV@.BI \-j " external-journal"
@JDEV@found.
.TP
.BI \-k
-When combined with the
+When combined with the
.B \-c
option, any existing bad blocks in the bad blocks list are preserved,
and any new bad blocks found by running
-.BR badblocks (8)
+.BR badblocks (8)
will be added to the existing bad blocks list.
.TP
.BI \-l " filename"
-Add the block numbers listed in the file specified by
+Add the block numbers listed in the file specified by
.I filename
to the list of bad blocks. The format of this file is the same as the
-one generated by the
+one generated by the
.BR badblocks (8)
program. Note that the block numbers are based on the blocksize
-of the filesystem. Hence,
+of the filesystem. Hence,
.BR badblocks (8)
must be given the blocksize of the filesystem in order to obtain correct
-results. As a result, it is much simpler and safer to use the
+results. As a result, it is much simpler and safer to use the
.B -c
-option to
+option to
.BR e2fsck ,
since it will assure that the correct parameters are passed to the
.B badblocks
program.
.TP
.BI \-L " filename"
-Set the bad blocks list to be the list of blocks specified by
+Set the bad blocks list to be the list of blocks specified by
.IR filename .
-(This option is the same as the
+(This option is the same as the
.B \-l
option, except the bad blocks list is cleared before the blocks listed
in the file are added to the bad blocks list.)
Open the filesystem read-only, and assume an answer of `no' to all
questions. Allows
.B e2fsck
-to be used non-interactively. (Note: if the
-.BR \-c ,
-.BR \-l ,
-or
-.B \-L
-options are specified in addition to the
-.B \-n
-option, then the filesystem will be opened read-write, to permit the
-bad-blocks list to be updated. However, no other changes will be made
-to the filesystem.) This option
-may not be specified at the same time as the
+to be used non-interactively. This option
+may not be specified at the same time as the
.B \-p
or
.B \-y
options.
.TP
.B \-p
-Automatically repair ("preen") the file system. This option will case
+Automatically repair ("preen") the file system. This option will cause
.B e2fsck
to automatically
fix any filesystem problems that can be safely fixed without human
-intervention. If
+intervention. If
.B e2fsck
discovers a problem which may require the system administrator
-to take additional corrective action,
+to take additional corrective action,
.B e2fsck
will print a description of the problem and then exit with the value 4
logically or'ed into the exit code. (See the \fBEXIT CODE\fR section.)
-This option is normally used by the system's boot scripts. It may not
+This option is normally used by the system's boot scripts. It may not
be specified at the same time as the
.B \-n
or
.B \-r
This option does nothing at all; it is provided only for backwards
compatibility.
-.TP
-.B \-s
-This option will byte-swap the filesystem so that it is using the normalized,
-standard byte-order (which is i386 or little endian). If the filesystem is
-already in the standard byte-order,
-.B e2fsck
-will take no action.
-.TP
-.B \-S
-This option will byte-swap the filesystem, regardless of its current
-byte-order.
.TP
.B \-t
Print timing statistics for
Print version information and exit.
.TP
.B \-y
-Assume an answer of `yes' to all questions; allows
+Assume an answer of `yes' to all questions; allows
.B e2fsck
to be used non-interactively. This option
-may not be specified at the same time as the
+may not be specified at the same time as the
.B \-n
or
.B \-p
options.
+.TP
+.BI \-z " undo_file"
+Before overwriting a file system block, write the old contents of the block to
+an undo file. This undo file can be used with e2undo(8) to restore the old
+contents of the file system should something go wrong. If the empty string is
+passed as the undo_file argument, the undo file will be written to a file named
+e2fsck-\fIdevice\fR.e2undo in the directory specified via the
+\fIE2FSPROGS_UNDO_DIR\fR environment variable.
+
+WARNING: The undo file cannot be used to recover from a power or system crash.
.SH EXIT CODE
The exit code returned by
.B e2fsck
\ 128\ \-\ Shared library error
.br
.SH SIGNALS
-The following signals have the following effect when sent to
+The following signals have the following effect when sent to
.BR e2fsck .
.TP
.B SIGUSR1
This signal causes
.B e2fsck
-to start displaying a completion bar. (See discussion of the
+to start displaying a completion bar or emitting progress information.
+(See discussion of the
.B \-C
option.)
.TP
.B SIGUSR2
This signal causes
-.B e2fsck
-to stop displaying a completion bar.
+.B e2fsck
+to stop displaying a completion bar or emitting progress information.
.SH REPORTING BUGS
Almost any piece of software will have bugs. If you manage to find a
-filesystem which causes
+filesystem which causes
.B e2fsck
-to crash, or which
+to crash, or which
.B e2fsck
is unable to repair, please report it to the author.
.PP
Ideally, include a complete transcript of the
.B e2fsck
run, so I can see exactly what error messages are displayed. (Make sure
-the messages printed by
-.B e2fsck
+the messages printed by
+.B e2fsck
are in English; if your system has been
-configured so that
+configured so that
.BR e2fsck 's
messages have been translated into another language, please set the the
.B LC_ALL
.B C
so that the transcript of e2fsck's output will be useful to me.)
If you
-have a writable filesystem where the transcript can be stored, the
+have a writable filesystem where the transcript can be stored, the
.BR script (1)
program is a handy way to save the output of
.B e2fsck
to a file.
.PP
-It is also useful to send the output of
+It is also useful to send the output of
.BR dumpe2fs (8).
-If a specific inode or inodes seems to be giving
-.B e2fsck
+If a specific inode or inodes seems to be giving
+.B e2fsck
trouble, try running the
.BR debugfs (8)
-command and send the output of the
+command and send the output of the
.BR stat (1u)
-command run on the relevant inode(s). If the inode is a directory, the
+command run on the relevant inode(s). If the inode is a directory, the
.B debugfs
.I dump
command will allow you to extract the contents of the directory inode,
which can sent to me after being first run through
-.BR uuencode (1).
+.BR uuencode (1).
The most useful data you can send to help reproduce
-the bug is a compressed raw image dump of the filesyste, generated using
+the bug is a compressed raw image dump of the filesystem, generated using
.BR e2image (8).
-See the
+See the
.BR e2image (8)
man page for more details.
.PP
-Always include the full version string which
+Always include the full version string which
.B e2fsck
displays when it is run, so I know which version you are running.
+.SH ENVIRONMENT
+.TP
+.BI E2FSCK_CONFIG
+Determines the location of the configuration file (see
+.BR e2fsck.conf (5)).
.SH AUTHOR
-This version of
+This version of
.B e2fsck
was written by Theodore Ts'o <tytso@mit.edu>.
.SH SEE ALSO
+.BR e2fsck.conf (5),
.BR badblocks (8),
.BR dumpe2fs (8),
.BR debugfs (8),
git://git.whamcloud.com / tools / e2fsprogs.git / blobdiff