Section: base
Priority: required
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
-Build-Depends: texi2html, texinfo, dc, debhelper (>= 4)
-Standards-Version: 3.5.9
+Build-Depends: texi2html, gettext, texinfo, dc, debhelper (>= 4)
+Standards-Version: 3.6.1
Package: e2fsck-static
Section: admin
Depends: e2fsprogs (= ${Source-Version})
Recommends: sash | zsh-static | busybox-static | zsh30-static
Architecture: any
-Description: A statically-linked version of the ext2 filesystem checker
+Description: statically-linked version of the ext2 filesystem checker
This may be of some help to you if your filesystem gets corrupted enough
to break the shared libraries used by the dynamically linked checker.
.
You may want to install a statically-linked shell as well, to be able
to run this program if something like your C library gets corrupted.
+Package: libcomerr2
+Section: libs
+Priority: required
+Provides: libcomerr-kth-compat
+Depends: ${shlibs:Depends}
+Replaces: e2fsprogs (<< 1.34-1)
+Architecture: any
+Description: common error description library
+ libcomerr is an attempt to present a common error-handling mechanism to
+ manipulate the most common form of error code in a fashion that does not
+ have the problems identified with mechanisms commonly in use.
+
Package: comerr-dev
Section: libdevel
Priority: extra
-Depends: ${libcdev:Depends}, libcomerr2
+Depends: libc6-dev | libc-dev, libcomerr2 (= ${Source-Version})
Suggests: doc-base
-Conflicts: e2fsprogs (<< 1.10-6)
Replaces: e2fslibs-dev (<< 1.33-2), libkrb5-dev (<< 1.3)
Architecture: any
-Description: The Common Error Description library - headers and static libraries
- libcomerr is an attempt to present a common error-handling mechanism to
+Description: common error description library - headers and static libraries
+ libcom_err is an attempt to present a common error-handling mechanism to
manipulate the most common form of error code in a fashion that does not
have the problems identified with mechanisms commonly in use.
+ .
+ This package contains the development environment for the com_err library.
+
+Package: libss2
+Section: libs
+Priority: required
+Depends: libcomerr2
+Replaces: e2fsprogs (<< 1.34-1)
+Architecture: any
+Description: command-line interface parsing library
+ This package includes a tool that parses a command table to generate
+ a simple command-line interface parser, the include files needed to
+ compile and use it, and the static libs.
+ .
+ It was originally inspired by the Multics SubSystem library.
Package: ss-dev
Section: libdevel
Priority: extra
-Depends: ${libcdev:Depends}, libss2
-Conflicts: e2fsprogs (<< 1.10-6)
+Depends: libc6-dev | libc-dev, libss2 (= ${Source-Version})
Architecture: any
-Description: Command-line interface parsing library - headers and static libraries
+Description: command-line interface parsing library - headers and static libraries
This package includes a tool that parses a command table to generate
a simple command-line interface parser, the include files needed to
compile and use it, and the static libs.
.
It was originally inspired by the Multics SubSystem library.
+ .
+ This package contains the development environment for the ss library.
+
+Package: libuuid1
+Section: libs
+Priority: required
+Depends: ${shlibs:Depends}
+Replaces: e2fsprogs (<< 1.34-1)
+Architecture: any
+Description: universally unique id library
+ libuuid generates and parses 128-bit universally unique id's (UUID's),
+ using a standard which is blessed by both Microsoft and DCE, and is
+ being proposed as an internet standard. See the internet-draft:
+ .
+ draft-leach-uuids-guids-01.txt
+ .
+ for more information.
+
+Package: libuuid1-udeb
+Section: debian-installer
+Priority: required
+Depends: ${shlibs:Depends}
+Provides: libuuid1
+Replaces: libuuid1
+Architecture: any
+Description: universally unique id library
+ libuuid generates and parses 128-bit universally unique id's (UUID's),
+ using a standard which is blessed by both Microsoft and DCE, and is
+ being proposed as an internet standard. See the internet-draft:
+ .
+ draft-leach-uuids-guids-01.txt
+ .
+ for more information.
+ .
+ This is a minimal package for debian-installer.
Package: uuid-dev
Section: libdevel
Priority: extra
-Depends: ${libcdev:Depends}, e2fsprogs (= ${Source-Version})
-Conflicts: e2fsprogs (<< 1.10-6)
+Depends: libc6-dev | libc-dev, libuuid1 (= ${Source-Version})
Replaces: e2fslibs-dev (<< 1.15)
Architecture: any
-Description: Universally unique id library - headers and static libraries
+Description: universally unique id library - headers and static libraries
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
draft-leach-uuids-guids-01.txt
.
for more information.
+ .
+ This package contains the development environment for the uuid library.
Package: libblkid1
Section: libs
Priority: required
Depends: ${shlibs:Depends}
Architecture: any
-Description: Block device id library
+Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
Depends: ${shlibs:Depends}
Provides: libblkid1
Architecture: any
-Description: Block device id library
+Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
Package: libblkid-dev
Section: libdevel
Priority: extra
-Depends: libblkid1 (= ${Source-Version})
+Depends: libc6-dev | libc-dev, libblkid1 (= ${Source-Version})
Architecture: any
-Description: Block device id library - headers and static libraries
+Description: block device id library - headers and static libraries
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
.
This package contains the development environment for the blkid library.
-Package: e2fsprogs-bf
-Section: devel
-Priority: extra
-Depends: ${shlibs:Depends}
-Conflicts: e2fsprogs
-Architecture: any
-Description: A stripped-down versions of e2fsprogs, for boot-floppies
- This package is an e2fsprogs package built for a reduced size, so that
- it can help to save space on installation boot-floppies.
- .
- Don't attempt to install this package, it has no support for a couple of
- features you surely want. Anyway it should refuse to install.
-
Package: e2fsprogs-udeb
Section: debian-installer
Priority: standard
Depends: ${shlibs:Depends}
Conflicts: e2fsprogs
Architecture: any
-Description: A stripped-down versions of e2fsprogs, for debian-installer
+Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
+Package: e2fslibs
+Section: libs
+Priority: required
+Depends: ${shlibs:Depends}
+Replaces: e2fsprogs (<< 1.34-1)
+Provides: libext2fs2, libe2p2
+Architecture: any
+Description: ext2 filesystem libraries
+ The ext2fs and e2p libraries are used by programs that directly access
+ EXT2 filesystems from usermode programs. The EXT2 filesystem is very often
+ used as the default filesystem on Linux systems. Various system programs
+ that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use
+ libe2p include dumpe2fs, chattr, and lsattr.
+
+Package: e2fslibs-dev
+Section: libdevel
+Priority: extra
+Depends: libc6-dev | libc-dev, comerr-dev, e2fslibs (= ${Source-Version})
+Suggests: doc-base
+Provides: ext2fs-dev, e2p-dev
+Replaces: libkrb5-dev (<< 1.3)
+Architecture: any
+Description: ext2 filesystem libraries - headers and static libraries
+ The ext2fs and e2p libraries are used by programs that directly access
+ EXT2 filesystems from usermode programs. The EXT2 filesystem is very often
+ used as the default filesystem on Linux systems. Various system programs
+ that use libext2fs include e2fsck, mke2fs, tune2fs, etc. Programs that use
+ libe2p include dumpe2fs, chattr, and lsattr.
+ .
+ This package contains the development environment for the ext2fs and e2p
+ libraries.
+
Package: e2fsprogs
Essential: yes
Pre-Depends: ${shlibs:Depends}
Depends:
Suggests: gpart, parted, e2fsck-static
-Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1)
-Provides: libcomerr2, libss2, libext2fs2, libe2p2, libuuid1
+Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
+Replaces: hurd (<= 20040301-1)
Architecture: any
-Description: The EXT2 file system utilities and libraries
+Description: ext2 file system utilities and libraries
EXT2 stands for "Extended Filesystem", version 2. It's the main
filesystem type used for hard disks on Debian and other Linux systems.
.
This package contains programs for creating, checking, and maintaining EXT2
filesystems, and the generic `fsck' wrapper.
-
-Package: e2fslibs-dev
-Section: libdevel
-Priority: extra
-Depends: comerr-dev, e2fsprogs (= ${Source-Version})
-Suggests: doc-base
-Provides: ext2fs-dev, e2p-dev
-Conflicts: e2fsprogs (<< 1.10-6)
-Replaces: libkrb5-dev (<< 1.3)
-Architecture: any
-Description: The headers and static libraries for ext2fs-aware tools-development
- EXT2FS stands for "Extended Filesystem", version 2. It's the filesystem
- type used for hard disks on Debian and other Linux systems.
- .
- This package contains the headers and shared libraries needed to compile
- ext2fs-aware programs. Only programmers that really manipulate
- features specific to the ext2 filesystem will need this. Most
- programmers will use the generic filesystem-independent interface
- from libc.
- .
- It also contains dev files for the e2p lib used by
- the e2fsprogs, but which is not yet packaged all by itself
- because it lacks documentation. It may also lack some support
- files, by I can't really know until someone uses it...
- .
- libe2p is for user-level e2fsprogs commands. It's used by dumpe2fs,
- chattr, and lsattr. Functions in libe2p typically have two
- characteristics (a) don't require that block device containing the
- filesystem be opened directly (functions in libext2fs do), and (b)
- libe2p typically contains printf statements or parse user input, and so
- have more internationalization issues.
git://git.whamcloud.com / tools / e2fsprogs.git / blobdiff