CCOPTS=
fi
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:674: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 689 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 706 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 723 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:729: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+ac_safe=`echo "linux/fs.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/fs.h""... $ac_c" 1>&6
+echo "configure:755: checking for linux/fs.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 760 "configure"
+#include "confdefs.h"
+#include <linux/fs.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ linux_headers=yes
+else
+ echo "$ac_t""no" 1>&6
+linux_headers=no
+fi
+
+if test "$linux_headers" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_LINUX_FS_H 1
+EOF
+
+else
+ LINUX_INCLUDE='-I$(top_srcdir)/include -I$(top_builddir)/include'
+ # Use this include directory with test compiles in the configure script too.
+ CPPFLAGS="$CPPFLAGS -I$srcdir/include -I./include"
+fi
+
LIB_EXT=.a
STATIC_LIB_EXT=.a
PROFILE_LIB_EXT=.a
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:905: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1030: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ln", so it can be a program name with args.
set dummy ln; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:934: checking for $ac_word" >&5
+echo "configure:1059: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:968: checking whether ln -s works" >&5
+echo "configure:1093: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "mv", so it can be a program name with args.
set dummy mv; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:991: checking for $ac_word" >&5
+echo "configure:1116: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MV'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cp", so it can be a program name with args.
set dummy cp; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1027: checking for $ac_word" >&5
+echo "configure:1152: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "rm", so it can be a program name with args.
set dummy rm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1063: checking for $ac_word" >&5
+echo "configure:1188: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "chmod", so it can be a program name with args.
set dummy chmod; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1099: checking for $ac_word" >&5
+echo "configure:1224: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_CHMOD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "awk", so it can be a program name with args.
set dummy awk; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1135: checking for $ac_word" >&5
+echo "configure:1260: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "sed", so it can be a program name with args.
set dummy sed; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1171: checking for $ac_word" >&5
+echo "configure:1296: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_SED'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "perl", so it can be a program name with args.
set dummy perl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1207: checking for $ac_word" >&5
+echo "configure:1332: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1241: checking build system type" >&5
+echo "configure:1366: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1267: checking for $ac_word" >&5
+echo "configure:1392: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1299: checking for $ac_word" >&5
+echo "configure:1424: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1334: checking for $ac_word" >&5
+echo "configure:1459: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1366: checking for $ac_word" >&5
+echo "configure:1491: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1401: checking for $ac_word" >&5
+echo "configure:1526: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1433: checking for $ac_word" >&5
+echo "configure:1558: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1468: checking for $ac_word" >&5
+echo "configure:1593: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1498: checking for $ac_word" >&5
+echo "configure:1623: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1549: checking for $ac_word" >&5
+echo "configure:1674: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1581: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1706: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1592 "configure"
+#line 1717 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1722: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1623: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1748: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1628: checking whether we are using GNU C" >&5
+echo "configure:1753: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1762: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1656: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1781: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1699: checking for a BSD compatible install" >&5
+echo "configure:1824: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1753: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+# See if we need a separate native compiler.
+if test $cross_compiling = no; then
+ BUILD_CC="$CC"
+
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 1768 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1774: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1785 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1791: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+ for ac_prog in gcc cc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1887: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_BUILD_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <<EOF
-#line 1802 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+ if test -n "$BUILD_CC"; then
+ ac_cv_prog_BUILD_CC="$BUILD_CC" # Let the user override the test.
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_BUILD_CC="$ac_prog"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
fi
- CPP="$ac_cv_prog_CPP"
+BUILD_CC="$ac_cv_prog_BUILD_CC"
+if test -n "$BUILD_CC"; then
+ echo "$ac_t""$BUILD_CC" 1>&6
else
- ac_cv_prog_CPP="$CPP"
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$CPP" 1>&6
-for ac_hdr in stdlib.h unistd.h stdarg.h errno.h malloc.h mntent.h paths.h dirent.h getopt.h setjmp.h linux/fd.h linux/major.h sys/disklabel.h sys/sockio.h sys/time.h sys/stat.h sys/types.h net/if.h netinet/in.h
+test -n "$BUILD_CC" && break
+done
+
+fi
+for ac_hdr in stdlib.h unistd.h stdarg.h errno.h malloc.h mntent.h paths.h dirent.h getopt.h setjmp.h signal.h termios.h linux/fd.h linux/major.h sys/disklabel.h sys/sockio.h sys/time.h sys/stat.h sys/types.h net/if.h netinet/in.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1836: checking for $ac_hdr" >&5
+echo "configure:1921: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1841 "configure"
+#line 1926 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1846: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1931: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:1873: checking for vprintf" >&5
+echo "configure:1958: checking for vprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1878 "configure"
+#line 1963 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:1901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vprintf=yes"
else
if test "$ac_cv_func_vprintf" != yes; then
echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:1925: checking for _doprnt" >&5
+echo "configure:2010: checking for _doprnt" >&5
if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1930 "configure"
+#line 2015 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _doprnt(); below. */
; return 0; }
EOF
-if { (eval echo configure:1953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func__doprnt=yes"
else
fi
echo $ac_n "checking whether struct dirent has a d_namlen field""... $ac_c" 1>&6
-echo "configure:1978: checking whether struct dirent has a d_namlen field" >&5
+echo "configure:2063: checking whether struct dirent has a d_namlen field" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_struct_d_namlen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1983 "configure"
+#line 2068 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <dirent.h>
struct dirent de; de.d_namlen = 0;
; return 0; }
EOF
-if { (eval echo configure:1991: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2076: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_struct_d_namlen=yes
else
fi
echo $ac_n "checking whether llseek declared in unistd.h""... $ac_c" 1>&6
-echo "configure:2011: checking whether llseek declared in unistd.h" >&5
+echo "configure:2096: checking whether llseek declared in unistd.h" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_have_llseek_prototype'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2016 "configure"
+#line 2101 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
extern int llseek(int);
; return 0; }
EOF
-if { (eval echo configure:2023: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_have_llseek_prototype=no
else
ac_cv_sizeof_short=2
ac_cv_sizeof_int=4
ac_cv_sizeof_long=4
- ac_cv_sizeof_long_long=0
- echo "configure: warning: Cross-compiling, so cannot check type sizes; assuming short=2, int=4, long=4" 1>&2
+ ac_cv_sizeof_long_long=8
+ echo "configure: warning: Cross-compiling, so cannot check type sizes; assuming short=2, int=4, long=4, long long=8" 1>&2
fi
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2051: checking size of short" >&5
+echo "configure:2136: checking size of short" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2059 "configure"
+#line 2144 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2155: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:2090: checking size of int" >&5
+echo "configure:2175: checking size of int" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2098 "configure"
+#line 2183 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2109: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2129: checking size of long" >&5
+echo "configure:2214: checking size of long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2137 "configure"
+#line 2222 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2233: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2168: checking size of long long" >&5
+echo "configure:2253: checking size of long long" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2176 "configure"
+#line 2261 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2187: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
echo $ac_n "checking whether struct stat has a st_flags field""... $ac_c" 1>&6
-echo "configure:2215: checking whether struct stat has a st_flags field" >&5
+echo "configure:2300: checking whether struct stat has a st_flags field" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_struct_st_flags'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2220 "configure"
+#line 2305 "configure"
#include "confdefs.h"
#include <sys/stat.h>
int main() {
struct stat stat; stat.st_flags = 0;
; return 0; }
EOF
-if { (eval echo configure:2227: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2312: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_struct_st_flags=yes
else
echo "$ac_t""$e2fsprogs_cv_struct_st_flags" 1>&6
if test "$e2fsprogs_cv_struct_st_flags" = yes; then
- cat >> confdefs.h <<\EOF
+ echo $ac_n "checking whether st_flags field is useful""... $ac_c" 1>&6
+echo "configure:2327: checking whether st_flags field is useful" >&5
+ if eval "test \"`echo '$''{'e2fsprogs_cv_struct_st_flags_immut'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2332 "configure"
+#include "confdefs.h"
+#include <sys/stat.h>
+int main() {
+struct stat stat; stat.st_flags |= UF_IMMUTABLE;
+; return 0; }
+EOF
+if { (eval echo configure:2339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ e2fsprogs_cv_struct_st_flags_immut=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ e2fsprogs_cv_struct_st_flags_immut=no
+fi
+rm -f conftest*
+fi
+
+ echo "$ac_t""$e2fsprogs_cv_struct_st_flags_immut" 1>&6
+ if test "$e2fsprogs_cv_struct_st_flags_immut" = yes; then
+ cat >> confdefs.h <<\EOF
#define HAVE_STAT_FLAGS 1
EOF
+ fi
fi
for ac_func in chflags getrusage llseek strdup getmntinfo strcasecmp srandom fchown mallinfo
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2249: checking for $ac_func" >&5
+echo "configure:2362: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2254 "configure"
+#line 2367 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking ino_t defined by sys/types.h""... $ac_c" 1>&6
-echo "configure:2302: checking ino_t defined by sys/types.h" >&5
+echo "configure:2415: checking ino_t defined by sys/types.h" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_ino_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2307 "configure"
+#line 2420 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
ino_t ino; ino = 0;
; return 0; }
EOF
-if { (eval echo configure:2314: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2427: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_ino_t=yes
else
EOF
fi
-ac_safe=`echo "linux/fs.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for linux/fs.h""... $ac_c" 1>&6
-echo "configure:2335: checking for linux/fs.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2340 "configure"
-#include "confdefs.h"
-#include <linux/fs.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2345: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- linux_headers=yes
-else
- echo "$ac_t""no" 1>&6
-linux_headers=no
-fi
-
-if test "$linux_headers" = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LINUX_FS_H 1
-EOF
-
-else
- LINUX_INCLUDE='-I$(top_srcdir)/include -I$(top_builddir)/include'
- # Use this include directory with test compiles in the configure script too.
- CPPFLAGS="$CPPFLAGS -I$srcdir/include -I./include"
-fi
-
SOCKET_LIB=''
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:2380: checking for socket in -lsocket" >&5
+echo "configure:2448: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2388 "configure"
+#line 2456 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:2399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for optreset""... $ac_c" 1>&6
-echo "configure:2421: checking for optreset" >&5
+echo "configure:2489: checking for optreset" >&5
if eval "test \"`echo '$''{'ac_cv_have_optreset'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2426 "configure"
+#line 2494 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
fi
echo $ac_n "checking whether the ext2 ioctls compile""... $ac_c" 1>&6
-echo "configure:2449: checking whether the ext2 ioctls compile" >&5
+echo "configure:2517: checking whether the ext2 ioctls compile" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_ioctl_ext2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2454 "configure"
+#line 2522 "configure"
#include "confdefs.h"
#include <linux/ext2_fs.h>
#include <sys/ioctl.h>
ioctl (0, EXT2_IOC_SETVERSION, 0);
; return 0; }
EOF
-if { (eval echo configure:2462: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2530: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_ioctl_ext2=yes
else
fi
echo $ac_n "checking whether struct ext2_inode has an i_version field""... $ac_c" 1>&6
-echo "configure:2482: checking whether struct ext2_inode has an i_version field" >&5
+echo "configure:2550: checking whether struct ext2_inode has an i_version field" >&5
if eval "test \"`echo '$''{'e2fsprogs_cv_ext2_inode_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2487 "configure"
+#line 2555 "configure"
#include "confdefs.h"
#include <linux/ext2_fs.h>
int main() {
struct ext2_inode e2i; e2i.i_version=0;
; return 0; }
EOF
-if { (eval echo configure:2494: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
e2fsprogs_cv_ext2_inode_version=yes
else
fi
case "$host_os" in
-linux*)
+linux* | gnu*)
if test "$prefix" = NONE -a "$root_prefix" = NONE ; then
root_prefix="";
echo "On $host_os systems, root_prefix defaults to ''"
fi
echo $ac_n "checking whether linker accepts -static""... $ac_c" 1>&6
-echo "configure:2538: checking whether linker accepts -static" >&5
+echo "configure:2606: checking whether linker accepts -static" >&5
if eval "test \"`echo '$''{'ac_cv_e2fsprogs_use_static'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
SAVE_LDFLAGS=$LDFLAGS; LDFLAGS="$LDFLAGS -static"
cat > conftest.$ac_ext <<EOF
-#line 2544 "configure"
+#line 2612 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
fflush(stdout);
; return 0; }
EOF
-if { (eval echo configure:2551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_e2fsprogs_use_static=yes
else
s%@CC@%$CC%g
s%@LD@%$LD%g
s%@CCOPTS@%$CCOPTS%g
+s%@CPP@%$CPP%g
+s%@LINUX_INCLUDE@%$LINUX_INCLUDE%g
s%@DLL_CMT@%$DLL_CMT%g
/@MAKEFILE_DLL@/r $MAKEFILE_DLL
s%@MAKEFILE_DLL@%%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@CPP@%$CPP%g
+s%@BUILD_CC@%$BUILD_CC%g
s%@SIZEOF_SHORT@%$SIZEOF_SHORT%g
s%@SIZEOF_INT@%$SIZEOF_INT%g
s%@SIZEOF_LONG@%$SIZEOF_LONG%g
s%@SIZEOF_LONG_LONG@%$SIZEOF_LONG_LONG%g
-s%@LINUX_INCLUDE@%$LINUX_INCLUDE%g
s%@SOCKET_LIB@%$SOCKET_LIB%g
s%@root_prefix@%$root_prefix%g
s%@LDFLAG_STATIC@%$LDFLAG_STATIC%g