1 # Makefile for PO directory in any package using GNU gettext.
2 # Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
4 # This file can be copied and used freely without restrictions. It can
5 # be used in projects which are not available under the GNU General Public
6 # License but which still want to provide support for the GNU gettext
8 # Please note that the actual code of GNU gettext is covered by the GNU
9 # General Public License and is *not* in the public domain.
11 # Origin: gettext-0.14
20 top_srcdir = @top_srcdir@
24 exec_prefix = @exec_prefix@
25 datarootdir = @datarootdir@
27 localedir = $(datadir)/locale
28 gettextsrcdir = $(datadir)/gettext/po
31 INSTALL_DATA = @INSTALL_DATA@
32 mkinstalldirs = @MKDIR_P@
38 MSGMERGE_UPDATE = @MSGMERGE@ --update
45 UPDATEPOFILES = @UPDATEPOFILES@
46 DUMMYPOFILES = @DUMMYPOFILES@
47 DISTFILES.common = Makefile.in.in remove-potcdate.sin \
48 $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
49 DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
50 $(POFILES) $(GMOFILES) \
51 $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
57 # Makevars gets inserted here. (Don't remove this line!)
60 .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
63 $(E) "$(MSGFMT) -c -o $@ $<"
64 $(Q) $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
67 @lang=`echo $* | sed -e 's,.*/,,'`; \
68 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
69 echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
70 cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
73 sed -e '/^#/d' $< > t-$@
79 all-yes: @MAINTAINER_CMT@stamp-po
82 # stamp-po is a timestamp denoting the last time at which the CATALOGS have
83 # been loosely updated. Its purpose is that when a developer or translator
84 # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
85 # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
86 # invocations of "make" will do nothing. This timestamp would not be necessary
87 # if updating the $(CATALOGS) would always touch them; however, the rule for
88 # $(POFILES) has been designed to not touch files that don't need to be
90 stamp-po: $(srcdir)/$(DOMAIN).pot
91 test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
92 @echo "touch stamp-po"
93 @echo timestamp > stamp-poT
94 @mv stamp-poT stamp-po
96 # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
97 # otherwise packages like GCC can not be built if only parts of the source
98 # have been downloaded.
100 # This target rebuilds $(DOMAIN).pot; it is an expensive operation.
101 # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
102 $(DOMAIN).pot-update: $(srcdir)/POTFILES.in remove-potcdate.sed \
103 $(srcdir)/at-expand.pl
104 $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
105 --directory=$(top_builddir) \
106 --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
107 --files-from=$(srcdir)/POTFILES.in \
108 --copyright-holder='$(COPYRIGHT_HOLDER)' \
109 --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
110 perl $(srcdir)/at-expand.pl < $(DOMAIN).po > $(DOMAIN).po.new
111 mv $(DOMAIN).po $(DOMAIN).po.bak
112 mv $(DOMAIN).po.new $(DOMAIN).po
113 test ! -f $(DOMAIN).po || { \
114 if test -f $(srcdir)/$(DOMAIN).pot; then \
115 sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
116 sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
117 if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
118 rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
120 rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
121 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
124 mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
128 # This rule has no dependencies: we don't need to update $(DOMAIN).pot at
129 # every "make" invocation, only create it when it is missing.
130 # Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
131 $(srcdir)/$(DOMAIN).pot:
132 $(MAKE) $(DOMAIN).pot-update
134 # This target rebuilds a PO file if $(DOMAIN).pot has changed.
135 # Note that a PO file is not touched if it doesn't need to be changed.
136 $(POFILES): $(srcdir)/$(DOMAIN).pot
137 @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
138 if test -f "$(srcdir)/$${lang}.po"; then \
139 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
140 echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
141 cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
143 $(MAKE) $${lang}.po-create; \
147 install: install-exec install-data
149 install-data: install-data-@USE_NLS@
150 if test "$(PACKAGE)" = "gettext-tools"; then \
151 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
152 for file in $(DISTFILES.common) Makevars.template; do \
153 $(INSTALL_DATA) $(srcdir)/$$file \
154 $(DESTDIR)$(gettextsrcdir)/$$file; \
156 for file in Makevars; do \
157 rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
163 install-data-yes: all
164 $(mkinstalldirs) $(DESTDIR)$(datadir)
165 @catalogs='$(CATALOGS)'; \
166 for cat in $$catalogs; do \
167 cat=`basename $$cat`; \
168 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
169 dir=$(localedir)/$$lang/LC_MESSAGES; \
170 $(mkinstalldirs) $(DESTDIR)$$dir; \
171 if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
172 $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
173 echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
174 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
175 if test -n "$$lc"; then \
176 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
177 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
178 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
179 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
180 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
182 if test -f $$file; then \
183 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
186 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
188 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
191 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
192 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
195 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
196 ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
197 ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
198 cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
199 echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
204 install-strip: install
206 installdirs: installdirs-exec installdirs-data
208 installdirs-data: installdirs-data-@USE_NLS@
209 if test "$(PACKAGE)" = "gettext-tools"; then \
210 $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
215 installdirs-data-yes:
216 $(mkinstalldirs) $(DESTDIR)$(datadir)
217 @catalogs='$(CATALOGS)'; \
218 for cat in $$catalogs; do \
219 cat=`basename $$cat`; \
220 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
221 dir=$(localedir)/$$lang/LC_MESSAGES; \
222 $(mkinstalldirs) $(DESTDIR)$$dir; \
223 for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
224 if test -n "$$lc"; then \
225 if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
226 link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
227 mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
228 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
229 (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
231 if test -f $$file; then \
232 ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
235 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
237 if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
240 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
241 mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
248 # Define this as empty until I found a useful application.
251 uninstall: uninstall-exec uninstall-data
253 uninstall-data: uninstall-data-@USE_NLS@
254 if test "$(PACKAGE)" = "gettext-tools"; then \
255 for file in $(DISTFILES.common) Makevars.template; do \
256 rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
263 catalogs='$(CATALOGS)'; \
264 for cat in $$catalogs; do \
265 cat=`basename $$cat`; \
266 lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
267 for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
268 rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
274 info dvi ps pdf html tags TAGS ctags CTAGS ID:
277 rm -f remove-potcdate.sed
279 rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
280 rm -f $(DOMAIN).po.bak
288 rm -f Makefile Makefile.in POTFILES *.mo
290 maintainer-clean: distclean
291 @echo "This command is intended for maintainers to use;"
292 @echo "it deletes files that may require special tools to rebuild."
293 rm -f stamp-po $(GMOFILES)
295 distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
299 # This is a separate target because 'update-po' must be executed before.
301 dists="$(DISTFILES)"; \
302 if test "$(PACKAGE)" = "gettext-tools"; then \
303 dists="$$dists Makevars.template"; \
305 if test -f $(srcdir)/ChangeLog; then \
306 dists="$$dists ChangeLog"; \
308 for i in 0 1 2 3 4 5 6 7 8 9; do \
309 if test -f $(srcdir)/ChangeLog.$$i; then \
310 dists="$$dists ChangeLog.$$i"; \
313 if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
314 for file in $$dists; do \
315 if test -f $$file; then \
316 cp -p $$file $(distdir); \
318 cp -p $(srcdir)/$$file $(distdir); \
323 $(MAKE) $(DOMAIN).pot-update
324 test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
327 # General rule for creating PO files.
330 @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
331 echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
334 # General rule for updating PO files.
337 @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
338 if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
341 test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
342 echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
344 if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
345 if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
346 rm -f $$tmpdir/$$lang.new.po; \
348 if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
351 echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
356 echo "msgmerge for $$lang.po failed!" 1>&2; \
357 rm -f $$tmpdir/$$lang.new.po; \
362 update-gmo: Makefile $(GMOFILES)
365 Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
367 && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
368 $(SHELL) ./config.status
372 # Tell versions [3.59,3.63) of GNU make not to export all variables.
373 # Otherwise a system limit (for SysV at least) may be exceeded.