misc/mke2fs.c

   1 /*
   2  * mke2fs.c - Make a ext2fs filesystem.
   3  *
   4  * Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5  *      2003, 2004, 2005 by Theodore Ts'o.
   6  *
   7  * %Begin-Header%
   8  * This file may be redistributed under the terms of the GNU Public
   9  * License.
  10  * %End-Header%
  11  */
  12
  13 /* Usage: mke2fs [options] device
  14  *
  15  * The device may be a block device or a image of one, but this isn't
  16  * enforced (but it's not much fun on a character device :-).
  17  */
  18
  19 #define _XOPEN_SOURCE 600
  20
  21 #include "config.h"
  22 #include <stdio.h>
  23 #include <string.h>
  24 #include <strings.h>
  25 #include <ctype.h>
  26 #include <time.h>
  27 #ifdef __linux__
  28 #include <sys/utsname.h>
  29 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
  30 #endif
  31 #ifdef HAVE_GETOPT_H
  32 #include <getopt.h>
  33 #else
  34 extern char *optarg;
  35 extern int optind;
  36 #endif
  37 #ifdef HAVE_UNISTD_H
  38 #include <unistd.h>
  39 #endif
  40 #ifdef HAVE_STDLIB_H
  41 #include <stdlib.h>
  42 #endif
  43 #ifdef HAVE_ERRNO_H
  44 #include <errno.h>
  45 #endif
  46 #ifdef HAVE_SYS_IOCTL_H
  47 #include <sys/ioctl.h>
  48 #endif
  49 #include <libgen.h>
  50 #include <limits.h>
  51 #include <blkid/blkid.h>
  52
  53 #include "ext2fs/ext2_fs.h"
  54 #include "ext2fs/ext2fsP.h"
  55 #include "uuid/uuid.h"
  56 #include "util.h"
  57 #include "support/nls-enable.h"
  58 #include "support/plausible.h"
  59 #include "support/profile.h"
  60 #include "support/prof_err.h"
  61 #include "../version.h"
  62 #include "support/quotaio.h"
  63 #include "mke2fs.h"
  64 #include "create_inode.h"
  65
  66 #define STRIDE_LENGTH 8
  67
  68 #define MAX_32_NUM ((((unsigned long long) 1) << 32) - 1)
  69
  70 #ifndef __sparc__
  71 #define ZAP_BOOTBLOCK
  72 #endif
  73
  74 #define DISCARD_STEP_MB         (2048)
  75
  76 extern int isatty(int);
  77 extern FILE *fpopen(const char *cmd, const char *mode);
  78
  79 const char * program_name = "mke2fs";
  80 static const char * device_name /* = NULL */;
  81
  82 /* Command line options */
  83 static int      cflag;
  84 int     verbose;
  85 int     quiet;
  86 static int      super_only;
  87 static int      discard = 1;    /* attempt to discard device before fs creation */
  88 static int      direct_io;
  89 static int      force;
  90 static int      noaction;
  91 static int      num_backups = 2; /* number of backup bg's for sparse_super2 */
  92 static uid_t    root_uid;
  93 static gid_t    root_gid;
  94 int     journal_size;
  95 int     journal_flags;
  96 static int      lazy_itable_init;
  97 static int      packed_meta_blocks;
  98 int             no_copy_xattrs;
  99 static char     *bad_blocks_filename = NULL;
 100 static __u32    fs_stride;
 101 /* Initialize usr/grp quotas by default */
 102 static unsigned int quotatype_bits = (QUOTA_USR_BIT | QUOTA_GRP_BIT);
 103 static __u64    offset;
 104 static blk64_t journal_location = ~0LL;
 105 static int      proceed_delay = -1;
 106 static blk64_t  dev_size;
 107
 108 static struct ext2_super_block fs_param;
 109 static __u32 zero_buf[4];
 110 static char *fs_uuid = NULL;
 111 static char *creator_os;
 112 static char *volume_label;
 113 static char *mount_dir;
 114 char *journal_device;
 115 static int sync_kludge; /* Set using the MKE2FS_SYNC env. option */
 116 char **fs_types;
 117 const char *src_root_dir;  /* Copy files from the specified directory */
 118 static char *undo_file;
 119
 120 static int android_sparse_file; /* -E android_sparse */
 121
 122 static profile_t        profile;
 123
 124 static int sys_page_size = 4096;
 125
 126 static int errors_behavior = 0;
 127
 128 static void usage(void)
 129 {
 130         fprintf(stderr, _("Usage: %s [-c|-l filename] [-b block-size] "
 131         "[-C cluster-size]\n\t[-i bytes-per-inode] [-I inode-size] "
 132         "[-J journal-options]\n"
 133         "\t[-G flex-group-size] [-N number-of-inodes] "
 134         "[-d root-directory]\n"
 135         "\t[-m reserved-blocks-percentage] [-o creator-os]\n"
 136         "\t[-g blocks-per-group] [-L volume-label] "
 137         "[-M last-mounted-directory]\n\t[-O feature[,...]] "
 138         "[-r fs-revision] [-E extended-option[,...]]\n"
 139         "\t[-t fs-type] [-T usage-type ] [-U UUID] [-e errors_behavior]"
 140         "[-z undo_file]\n"
 141         "\t[-jnqvDFSV] device [blocks-count]\n"),
 142                 program_name);
 143         exit(1);
 144 }
 145
 146 static int int_log2(unsigned long long arg)
 147 {
 148         int     l = 0;
 149
 150         arg >>= 1;
 151         while (arg) {
 152                 l++;
 153                 arg >>= 1;
 154         }
 155         return l;
 156 }
 157
 158 int int_log10(unsigned long long arg)
 159 {
 160         int     l;
 161
 162         for (l=0; arg ; l++)
 163                 arg = arg / 10;
 164         return l;
 165 }
 166
 167 #ifdef __linux__
 168 static int parse_version_number(const char *s)
 169 {
 170         int     major, minor, rev;
 171         char    *endptr;
 172         const char *cp = s;
 173
 174         if (!s)
 175                 return 0;
 176         major = strtol(cp, &endptr, 10);
 177         if (cp == endptr || *endptr != '.')
 178                 return 0;
 179         cp = endptr + 1;
 180         minor = strtol(cp, &endptr, 10);
 181         if (cp == endptr || *endptr != '.')
 182                 return 0;
 183         cp = endptr + 1;
 184         rev = strtol(cp, &endptr, 10);
 185         if (cp == endptr)
 186                 return 0;
 187         return KERNEL_VERSION(major, minor, rev);
 188 }
 189
 190 static int is_before_linux_ver(unsigned int major, unsigned int minor,
 191                                unsigned int rev)
 192 {
 193         struct          utsname ut;
 194         static int      linux_version_code = -1;
 195
 196         if (uname(&ut)) {
 197                 perror("uname");
 198                 exit(1);
 199         }
 200         if (linux_version_code < 0)
 201                 linux_version_code = parse_version_number(ut.release);
 202         if (linux_version_code == 0)
 203                 return 0;
 204
 205         return linux_version_code < (int) KERNEL_VERSION(major, minor, rev);
 206 }
 207 #else
 208 static int is_before_linux_ver(unsigned int major, unsigned int minor,
 209                                unsigned int rev)
 210 {
 211         return 0;
 212 }
 213 #endif
 214
 215 /*
 216  * Helper function for read_bb_file and test_disk
 217  */
 218 static void invalid_block(ext2_filsys fs EXT2FS_ATTR((unused)), blk_t blk)
 219 {
 220         fprintf(stderr, _("Bad block %u out of range; ignored.\n"), blk);
 221         return;
 222 }
 223
 224 /*
 225  * Reads the bad blocks list from a file
 226  */
 227 static void read_bb_file(ext2_filsys fs, badblocks_list *bb_list,
 228                          const char *bad_blocks_file)
 229 {
 230         FILE            *f;
 231         errcode_t       retval;
 232
 233         f = fopen(bad_blocks_file, "r");
 234         if (!f) {
 235                 com_err("read_bad_blocks_file", errno,
 236                         _("while trying to open %s"), bad_blocks_file);
 237                 exit(1);
 238         }
 239         retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block);
 240         fclose (f);
 241         if (retval) {
 242                 com_err("ext2fs_read_bb_FILE", retval, "%s",
 243                         _("while reading in list of bad blocks from file"));
 244                 exit(1);
 245         }
 246 }
 247
 248 /*
 249  * Runs the badblocks program to test the disk
 250  */
 251 static void test_disk(ext2_filsys fs, badblocks_list *bb_list)
 252 {
 253         FILE            *f;
 254         errcode_t       retval;
 255         char            buf[1024];
 256
 257         sprintf(buf, "badblocks -b %d -X %s%s%s %llu", fs->blocksize,
 258                 quiet ? "" : "-s ", (cflag > 1) ? "-w " : "",
 259                 fs->device_name, ext2fs_blocks_count(fs->super)-1);
 260         if (verbose)
 261                 printf(_("Running command: %s\n"), buf);
 262         f = popen(buf, "r");
 263         if (!f) {
 264                 com_err("popen", errno,
 265                         _("while trying to run '%s'"), buf);
 266                 exit(1);
 267         }
 268         retval = ext2fs_read_bb_FILE(fs, f, bb_list, invalid_block);
 269         pclose(f);
 270         if (retval) {
 271                 com_err("ext2fs_read_bb_FILE", retval, "%s",
 272                         _("while processing list of bad blocks from program"));
 273                 exit(1);
 274         }
 275 }
 276
 277 static void handle_bad_blocks(ext2_filsys fs, badblocks_list bb_list)
 278 {
 279         dgrp_t                  i;
 280         blk_t                   j;
 281         unsigned                must_be_good;
 282         blk_t                   blk;
 283         badblocks_iterate       bb_iter;
 284         errcode_t               retval;
 285         blk_t                   group_block;
 286         int                     group;
 287         int                     group_bad;
 288
 289         if (!bb_list)
 290                 return;
 291
 292         /*
 293          * The primary superblock and group descriptors *must* be
 294          * good; if not, abort.
 295          */
 296         must_be_good = fs->super->s_first_data_block + 1 + fs->desc_blocks;
 297         for (i = fs->super->s_first_data_block; i <= must_be_good; i++) {
 298                 if (ext2fs_badblocks_list_test(bb_list, i)) {
 299                         fprintf(stderr, _("Block %d in primary "
 300                                 "superblock/group descriptor area bad.\n"), i);
 301                         fprintf(stderr, _("Blocks %u through %u must be good "
 302                                 "in order to build a filesystem.\n"),
 303                                 fs->super->s_first_data_block, must_be_good);
 304                         fputs(_("Aborting....\n"), stderr);
 305                         exit(1);
 306                 }
 307         }
 308
 309         /*
 310          * See if any of the bad blocks are showing up in the backup
 311          * superblocks and/or group descriptors.  If so, issue a
 312          * warning and adjust the block counts appropriately.
 313          */
 314         group_block = fs->super->s_first_data_block +
 315                 fs->super->s_blocks_per_group;
 316
 317         for (i = 1; i < fs->group_desc_count; i++) {
 318                 group_bad = 0;
 319                 for (j=0; j < fs->desc_blocks+1; j++) {
 320                         if (ext2fs_badblocks_list_test(bb_list,
 321                                                        group_block + j)) {
 322                                 if (!group_bad)
 323                                         fprintf(stderr,
 324 _("Warning: the backup superblock/group descriptors at block %u contain\n"
 325 "       bad blocks.\n\n"),
 326                                                 group_block);
 327                                 group_bad++;
 328                                 group = ext2fs_group_of_blk2(fs, group_block+j);
 329                                 ext2fs_bg_free_blocks_count_set(fs, group, ext2fs_bg_free_blocks_count(fs, group) + 1);
 330                                 ext2fs_group_desc_csum_set(fs, group);
 331                                 ext2fs_free_blocks_count_add(fs->super, 1);
 332                         }
 333                 }
 334                 group_block += fs->super->s_blocks_per_group;
 335         }
 336
 337         /*
 338          * Mark all the bad blocks as used...
 339          */
 340         retval = ext2fs_badblocks_list_iterate_begin(bb_list, &bb_iter);
 341         if (retval) {
 342                 com_err("ext2fs_badblocks_list_iterate_begin", retval, "%s",
 343                         _("while marking bad blocks as used"));
 344                 exit(1);
 345         }
 346         while (ext2fs_badblocks_list_iterate(bb_iter, &blk))
 347                 ext2fs_mark_block_bitmap2(fs->block_map, EXT2FS_B2C(fs, blk));
 348         ext2fs_badblocks_list_iterate_end(bb_iter);
 349 }
 350
 351 static void write_reserved_inodes(ext2_filsys fs)
 352 {
 353         errcode_t       retval;
 354         ext2_ino_t      ino;
 355         struct ext2_inode *inode;
 356
 357         retval = ext2fs_get_memzero(EXT2_INODE_SIZE(fs->super), &inode);
 358         if (retval) {
 359                 com_err("inode_init", retval, _("while allocating memory"));
 360                 exit(1);
 361         }
 362
 363         for (ino = 1; ino < EXT2_FIRST_INO(fs->super); ino++) {
 364                 retval = ext2fs_write_inode_full(fs, ino, inode,
 365                                                  EXT2_INODE_SIZE(fs->super));
 366                 if (retval) {
 367                         com_err("ext2fs_write_inode_full", retval,
 368                                 _("while writing reserved inodes"));
 369                         exit(1);
 370                 }
 371         }
 372
 373         ext2fs_free_mem(&inode);
 374 }
 375
 376 static errcode_t packed_allocate_tables(ext2_filsys fs)
 377 {
 378         errcode_t       retval;
 379         dgrp_t          i;
 380         blk64_t         goal = 0;
 381
 382         for (i = 0; i < fs->group_desc_count; i++) {
 383                 retval = ext2fs_new_block2(fs, goal, NULL, &goal);
 384                 if (retval)
 385                         return retval;
 386                 ext2fs_block_alloc_stats2(fs, goal, +1);
 387                 ext2fs_block_bitmap_loc_set(fs, i, goal);
 388         }
 389         for (i = 0; i < fs->group_desc_count; i++) {
 390                 retval = ext2fs_new_block2(fs, goal, NULL, &goal);
 391                 if (retval)
 392                         return retval;
 393                 ext2fs_block_alloc_stats2(fs, goal, +1);
 394                 ext2fs_inode_bitmap_loc_set(fs, i, goal);
 395         }
 396         for (i = 0; i < fs->group_desc_count; i++) {
 397                 blk64_t end = ext2fs_blocks_count(fs->super) - 1;
 398                 retval = ext2fs_get_free_blocks2(fs, goal, end,
 399                                                  fs->inode_blocks_per_group,
 400                                                  fs->block_map, &goal);
 401                 if (retval)
 402                         return retval;
 403                 ext2fs_block_alloc_stats_range(fs, goal,
 404                                                fs->inode_blocks_per_group, +1);
 405                 ext2fs_inode_table_loc_set(fs, i, goal);
 406                 ext2fs_group_desc_csum_set(fs, i);
 407         }
 408         return 0;
 409 }
 410
 411 static void write_inode_tables(ext2_filsys fs, int lazy_flag, int itable_zeroed)
 412 {
 413         errcode_t       retval;
 414         blk64_t         blk;
 415         dgrp_t          i;
 416         int             num;
 417         struct ext2fs_numeric_progress_struct progress;
 418
 419         ext2fs_numeric_progress_init(fs, &progress,
 420                                      _("Writing inode tables: "),
 421                                      fs->group_desc_count);
 422
 423         for (i = 0; i < fs->group_desc_count; i++) {
 424                 ext2fs_numeric_progress_update(fs, &progress, i);
 425
 426                 blk = ext2fs_inode_table_loc(fs, i);
 427                 num = fs->inode_blocks_per_group;
 428
 429                 if (lazy_flag)
 430                         num = ext2fs_div_ceil((fs->super->s_inodes_per_group -
 431                                                ext2fs_bg_itable_unused(fs, i)) *
 432                                               EXT2_INODE_SIZE(fs->super),
 433                                               EXT2_BLOCK_SIZE(fs->super));
 434                 if (!lazy_flag || itable_zeroed) {
 435                         /* The kernel doesn't need to zero the itable blocks */
 436                         ext2fs_bg_flags_set(fs, i, EXT2_BG_INODE_ZEROED);
 437                         ext2fs_group_desc_csum_set(fs, i);
 438                 }
 439                 if (!itable_zeroed) {
 440                         retval = ext2fs_zero_blocks2(fs, blk, num, &blk, &num);
 441                         if (retval) {
 442                                 fprintf(stderr, _("\nCould not write %d "
 443                                           "blocks in inode table starting at %llu: %s\n"),
 444                                         num, blk, error_message(retval));
 445                                 exit(1);
 446                         }
 447                 }
 448                 if (sync_kludge) {
 449                         if (sync_kludge == 1)
 450                                 io_channel_flush(fs->io);
 451                         else if ((i % sync_kludge) == 0)
 452                                 io_channel_flush(fs->io);
 453                 }
 454         }
 455         ext2fs_numeric_progress_close(fs, &progress,
 456                                       _("done                            \n"));
 457
 458         /* Reserved inodes must always have correct checksums */
 459         if (ext2fs_has_feature_metadata_csum(fs->super))
 460                 write_reserved_inodes(fs);
 461 }
 462
 463 static void create_root_dir(ext2_filsys fs)
 464 {
 465         errcode_t               retval;
 466         struct ext2_inode       inode;
 467
 468         retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, EXT2_ROOT_INO, 0);
 469         if (retval) {
 470                 com_err("ext2fs_mkdir", retval, "%s",
 471                         _("while creating root dir"));
 472                 exit(1);
 473         }
 474         if (root_uid != 0 || root_gid != 0) {
 475                 retval = ext2fs_read_inode(fs, EXT2_ROOT_INO, &inode);
 476                 if (retval) {
 477                         com_err("ext2fs_read_inode", retval, "%s",
 478                                 _("while reading root inode"));
 479                         exit(1);
 480                 }
 481
 482                 inode.i_uid = root_uid;
 483                 ext2fs_set_i_uid_high(inode, root_uid >> 16);
 484                 inode.i_gid = root_gid;
 485                 ext2fs_set_i_gid_high(inode, root_gid >> 16);
 486
 487                 retval = ext2fs_write_new_inode(fs, EXT2_ROOT_INO, &inode);
 488                 if (retval) {
 489                         com_err("ext2fs_write_inode", retval, "%s",
 490                                 _("while setting root inode ownership"));
 491                         exit(1);
 492                 }
 493         }
 494 }
 495
 496 static void create_lost_and_found(ext2_filsys fs)
 497 {
 498         unsigned int            lpf_size = 0;
 499         errcode_t               retval;
 500         ext2_ino_t              ino;
 501         const char              *name = "lost+found";
 502         int                     i;
 503
 504         fs->umask = 077;
 505         retval = ext2fs_mkdir(fs, EXT2_ROOT_INO, 0, name);
 506         if (retval) {
 507                 com_err("ext2fs_mkdir", retval, "%s",
 508                         _("while creating /lost+found"));
 509                 exit(1);
 510         }
 511
 512         retval = ext2fs_lookup(fs, EXT2_ROOT_INO, name, strlen(name), 0, &ino);
 513         if (retval) {
 514                 com_err("ext2_lookup", retval, "%s",
 515                         _("while looking up /lost+found"));
 516                 exit(1);
 517         }
 518
 519         for (i=1; i < EXT2_NDIR_BLOCKS; i++) {
 520                 /* Ensure that lost+found is at least 2 blocks, so we always
 521                  * test large empty blocks for big-block filesystems.  */
 522                 if ((lpf_size += fs->blocksize) >= 16*1024 &&
 523                     lpf_size >= 2 * fs->blocksize)
 524                         break;
 525                 retval = ext2fs_expand_dir(fs, ino);
 526                 if (retval) {
 527                         com_err("ext2fs_expand_dir", retval, "%s",
 528                                 _("while expanding /lost+found"));
 529                         exit(1);
 530                 }
 531         }
 532 }
 533
 534 static void create_bad_block_inode(ext2_filsys fs, badblocks_list bb_list)
 535 {
 536         errcode_t       retval;
 537
 538         ext2fs_mark_inode_bitmap2(fs->inode_map, EXT2_BAD_INO);
 539         ext2fs_inode_alloc_stats2(fs, EXT2_BAD_INO, +1, 0);
 540         retval = ext2fs_update_bb_inode(fs, bb_list);
 541         if (retval) {
 542                 com_err("ext2fs_update_bb_inode", retval, "%s",
 543                         _("while setting bad block inode"));
 544                 exit(1);
 545         }
 546
 547 }
 548
 549 static void reserve_inodes(ext2_filsys fs)
 550 {
 551         ext2_ino_t      i;
 552
 553         for (i = EXT2_ROOT_INO + 1; i < EXT2_FIRST_INODE(fs->super); i++)
 554                 ext2fs_inode_alloc_stats2(fs, i, +1, 0);
 555         ext2fs_mark_ib_dirty(fs);
 556 }
 557
 558 #define BSD_DISKMAGIC   (0x82564557UL)  /* The disk magic number */
 559 #define BSD_MAGICDISK   (0x57455682UL)  /* The disk magic number reversed */
 560 #define BSD_LABEL_OFFSET        64
 561
 562 static void zap_sector(ext2_filsys fs, int sect, int nsect)
 563 {
 564         char *buf;
 565         int retval;
 566         unsigned int *magic;
 567
 568         buf = calloc(512, nsect);
 569         if (!buf) {
 570                 printf(_("Out of memory erasing sectors %d-%d\n"),
 571                        sect, sect + nsect - 1);
 572                 exit(1);
 573         }
 574
 575         if (sect == 0) {
 576                 /* Check for a BSD disklabel, and don't erase it if so */
 577                 retval = io_channel_read_blk64(fs->io, 0, -512, buf);
 578                 if (retval)
 579                         fprintf(stderr,
 580                                 _("Warning: could not read block 0: %s\n"),
 581                                 error_message(retval));
 582                 else {
 583                         magic = (unsigned int *) (buf + BSD_LABEL_OFFSET);
 584                         if ((*magic == BSD_DISKMAGIC) ||
 585                             (*magic == BSD_MAGICDISK))
 586                                 return;
 587                 }
 588         }
 589
 590         memset(buf, 0, 512*nsect);
 591         io_channel_set_blksize(fs->io, 512);
 592         retval = io_channel_write_blk64(fs->io, sect, -512*nsect, buf);
 593         io_channel_set_blksize(fs->io, fs->blocksize);
 594         free(buf);
 595         if (retval)
 596                 fprintf(stderr, _("Warning: could not erase sector %d: %s\n"),
 597                         sect, error_message(retval));
 598 }
 599
 600 static void create_journal_dev(ext2_filsys fs)
 601 {
 602         struct ext2fs_numeric_progress_struct progress;
 603         errcode_t               retval;
 604         char                    *buf;
 605         blk64_t                 blk, err_blk;
 606         int                     c, count, err_count;
 607
 608         retval = ext2fs_create_journal_superblock(fs,
 609                                   ext2fs_blocks_count(fs->super), 0, &buf);
 610         if (retval) {
 611                 com_err("create_journal_dev", retval, "%s",
 612                         _("while initializing journal superblock"));
 613                 exit(1);
 614         }
 615
 616         if (journal_flags & EXT2_MKJOURNAL_LAZYINIT)
 617                 goto write_superblock;
 618
 619         ext2fs_numeric_progress_init(fs, &progress,
 620                                      _("Zeroing journal device: "),
 621                                      ext2fs_blocks_count(fs->super));
 622         blk = 0;
 623         count = ext2fs_blocks_count(fs->super);
 624         while (count > 0) {
 625                 if (count > 1024)
 626                         c = 1024;
 627                 else
 628                         c = count;
 629                 retval = ext2fs_zero_blocks2(fs, blk, c, &err_blk, &err_count);
 630                 if (retval) {
 631                         com_err("create_journal_dev", retval,
 632                                 _("while zeroing journal device "
 633                                   "(block %llu, count %d)"),
 634                                 err_blk, err_count);
 635                         exit(1);
 636                 }
 637                 blk += c;
 638                 count -= c;
 639                 ext2fs_numeric_progress_update(fs, &progress, blk);
 640         }
 641
 642         ext2fs_numeric_progress_close(fs, &progress, NULL);
 643 write_superblock:
 644         retval = io_channel_write_blk64(fs->io,
 645                                         fs->super->s_first_data_block+1,
 646                                         1, buf);
 647         (void) ext2fs_free_mem(&buf);
 648         if (retval) {
 649                 com_err("create_journal_dev", retval, "%s",
 650                         _("while writing journal superblock"));
 651                 exit(1);
 652         }
 653 }
 654
 655 static void show_stats(ext2_filsys fs)
 656 {
 657         struct ext2_super_block *s = fs->super;
 658         char                    buf[80];
 659         char                    *os;
 660         blk64_t                 group_block;
 661         dgrp_t                  i;
 662         int                     need, col_left;
 663
 664         if (!verbose) {
 665                 printf(_("Creating filesystem with %llu %dk blocks and "
 666                          "%u inodes\n"),
 667                        ext2fs_blocks_count(s), fs->blocksize >> 10,
 668                        s->s_inodes_count);
 669                 goto skip_details;
 670         }
 671
 672         if (ext2fs_blocks_count(&fs_param) != ext2fs_blocks_count(s))
 673                 fprintf(stderr, _("warning: %llu blocks unused.\n\n"),
 674                        ext2fs_blocks_count(&fs_param) - ext2fs_blocks_count(s));
 675
 676         memset(buf, 0, sizeof(buf));
 677         strncpy(buf, s->s_volume_name, sizeof(s->s_volume_name));
 678         printf(_("Filesystem label=%s\n"), buf);
 679         os = e2p_os2string(fs->super->s_creator_os);
 680         if (os)
 681                 printf(_("OS type: %s\n"), os);
 682         free(os);
 683         printf(_("Block size=%u (log=%u)\n"), fs->blocksize,
 684                 s->s_log_block_size);
 685         if (ext2fs_has_feature_bigalloc(fs->super))
 686                 printf(_("Cluster size=%u (log=%u)\n"),
 687                        fs->blocksize << fs->cluster_ratio_bits,
 688                        s->s_log_cluster_size);
 689         else
 690                 printf(_("Fragment size=%u (log=%u)\n"), EXT2_CLUSTER_SIZE(s),
 691                        s->s_log_cluster_size);
 692         printf(_("Stride=%u blocks, Stripe width=%u blocks\n"),
 693                s->s_raid_stride, s->s_raid_stripe_width);
 694         printf(_("%u inodes, %llu blocks\n"), s->s_inodes_count,
 695                ext2fs_blocks_count(s));
 696         printf(_("%llu blocks (%2.2f%%) reserved for the super user\n"),
 697                 ext2fs_r_blocks_count(s),
 698                100.0 *  ext2fs_r_blocks_count(s) / ext2fs_blocks_count(s));
 699         printf(_("First data block=%u\n"), s->s_first_data_block);
 700         if (root_uid != 0 || root_gid != 0)
 701                 printf(_("Root directory owner=%u:%u\n"), root_uid, root_gid);
 702         if (s->s_reserved_gdt_blocks)
 703                 printf(_("Maximum filesystem blocks=%lu\n"),
 704                        (s->s_reserved_gdt_blocks + fs->desc_blocks) *
 705                        EXT2_DESC_PER_BLOCK(s) * s->s_blocks_per_group);
 706         if (fs->group_desc_count > 1)
 707                 printf(_("%u block groups\n"), fs->group_desc_count);
 708         else
 709                 printf(_("%u block group\n"), fs->group_desc_count);
 710         if (ext2fs_has_feature_bigalloc(fs->super))
 711                 printf(_("%u blocks per group, %u clusters per group\n"),
 712                        s->s_blocks_per_group, s->s_clusters_per_group);
 713         else
 714                 printf(_("%u blocks per group, %u fragments per group\n"),
 715                        s->s_blocks_per_group, s->s_clusters_per_group);
 716         printf(_("%u inodes per group\n"), s->s_inodes_per_group);
 717
 718 skip_details:
 719         if (fs->group_desc_count == 1) {
 720                 printf("\n");
 721                 return;
 722         }
 723
 724         if (!e2p_is_null_uuid(s->s_uuid))
 725                 printf(_("Filesystem UUID: %s\n"), e2p_uuid2str(s->s_uuid));
 726         printf("%s", _("Superblock backups stored on blocks: "));
 727         group_block = s->s_first_data_block;
 728         col_left = 0;
 729         for (i = 1; i < fs->group_desc_count; i++) {
 730                 group_block += s->s_blocks_per_group;
 731                 if (!ext2fs_bg_has_super(fs, i))
 732                         continue;
 733                 if (i != 1)
 734                         printf(", ");
 735                 need = int_log10(group_block) + 2;
 736                 if (need > col_left) {
 737                         printf("\n\t");
 738                         col_left = 72;
 739                 }
 740                 col_left -= need;
 741                 printf("%llu", group_block);
 742         }
 743         printf("\n\n");
 744 }
 745
 746 /*
 747  * Returns true if making a file system for the Hurd, else 0
 748  */
 749 static int for_hurd(const char *os)
 750 {
 751         if (!os) {
 752 #ifdef __GNU__
 753                 return 1;
 754 #else
 755                 return 0;
 756 #endif
 757         }
 758         if (isdigit(*os))
 759                 return (atoi(os) == EXT2_OS_HURD);
 760         return (strcasecmp(os, "GNU") == 0 || strcasecmp(os, "hurd") == 0);
 761 }
 762
 763 /*
 764  * Set the S_CREATOR_OS field.  Return true if OS is known,
 765  * otherwise, 0.
 766  */
 767 static int set_os(struct ext2_super_block *sb, char *os)
 768 {
 769         if (isdigit (*os))
 770                 sb->s_creator_os = atoi (os);
 771         else if (strcasecmp(os, "linux") == 0)
 772                 sb->s_creator_os = EXT2_OS_LINUX;
 773         else if (strcasecmp(os, "GNU") == 0 || strcasecmp(os, "hurd") == 0)
 774                 sb->s_creator_os = EXT2_OS_HURD;
 775         else if (strcasecmp(os, "freebsd") == 0)
 776                 sb->s_creator_os = EXT2_OS_FREEBSD;
 777         else if (strcasecmp(os, "lites") == 0)
 778                 sb->s_creator_os = EXT2_OS_LITES;
 779         else
 780                 return 0;
 781         return 1;
 782 }
 783
 784 #define PATH_SET "PATH=/sbin"
 785
 786 static void parse_extended_opts(struct ext2_super_block *param,
 787                                 const char *opts)
 788 {
 789         char    *buf, *token, *next, *p, *arg, *badopt = 0;
 790         int     len;
 791         int     r_usage = 0;
 792         int     ret;
 793         int     encoding = -1;
 794         char    *encoding_flags = NULL;
 795
 796         len = strlen(opts);
 797         buf = malloc(len+1);
 798         if (!buf) {
 799                 fprintf(stderr, "%s",
 800                         _("Couldn't allocate memory to parse options!\n"));
 801                 exit(1);
 802         }
 803         strcpy(buf, opts);
 804         for (token = buf; token && *token; token = next) {
 805                 p = strchr(token, ',');
 806                 next = 0;
 807                 if (p) {
 808                         *p = 0;
 809                         next = p+1;
 810                 }
 811                 arg = strchr(token, '=');
 812                 if (arg) {
 813                         *arg = 0;
 814                         arg++;
 815                 }
 816                 if (strcmp(token, "desc-size") == 0 ||
 817                     strcmp(token, "desc_size") == 0) {
 818                         int desc_size;
 819
 820                         if (!ext2fs_has_feature_64bit(&fs_param)) {
 821                                 fprintf(stderr,
 822                                         _("%s requires '-O 64bit'\n"), token);
 823                                 r_usage++;
 824                                 continue;
 825                         }
 826                         if (param->s_reserved_gdt_blocks != 0) {
 827                                 fprintf(stderr,
 828                                         _("'%s' must be before 'resize=%u'\n"),
 829                                         token, param->s_reserved_gdt_blocks);
 830                                 r_usage++;
 831                                 continue;
 832                         }
 833                         if (!arg) {
 834                                 r_usage++;
 835                                 badopt = token;
 836                                 continue;
 837                         }
 838                         desc_size = strtoul(arg, &p, 0);
 839                         if (*p || (desc_size & (desc_size - 1))) {
 840                                 fprintf(stderr,
 841                                         _("Invalid desc_size: '%s'\n"), arg);
 842                                 r_usage++;
 843                                 continue;
 844                         }
 845                         param->s_desc_size = desc_size;
 846                 } else if (strcmp(token, "hash_seed") == 0) {
 847                         if (!arg) {
 848                                 r_usage++;
 849                                 badopt = token;
 850                                 continue;
 851                         }
 852                         if (uuid_parse(arg,
 853                                 (unsigned char *)param->s_hash_seed) != 0) {
 854                                 fprintf(stderr,
 855                                         _("Invalid hash seed: %s\n"), arg);
 856                                 r_usage++;
 857                                 continue;
 858                         }
 859                 } else if (strcmp(token, "offset") == 0) {
 860                         if (!arg) {
 861                                 r_usage++;
 862                                 badopt = token;
 863                                 continue;
 864                         }
 865                         offset = strtoull(arg, &p, 0);
 866                         if (*p) {
 867                                 fprintf(stderr, _("Invalid offset: %s\n"),
 868                                         arg);
 869                                 r_usage++;
 870                                 continue;
 871                         }
 872                 } else if (strcmp(token, "mmp_update_interval") == 0) {
 873                         if (!arg) {
 874                                 r_usage++;
 875                                 badopt = token;
 876                                 continue;
 877                         }
 878                         param->s_mmp_update_interval = strtoul(arg, &p, 0);
 879                         if (*p) {
 880                                 fprintf(stderr,
 881                                         _("Invalid mmp_update_interval: %s\n"),
 882                                         arg);
 883                                 r_usage++;
 884                                 continue;
 885                         }
 886                 } else if (strcmp(token, "no_copy_xattrs") == 0) {
 887                         no_copy_xattrs = 1;
 888                         continue;
 889                 } else if (strcmp(token, "num_backup_sb") == 0) {
 890                         if (!arg) {
 891                                 r_usage++;
 892                                 badopt = token;
 893                                 continue;
 894                         }
 895                         num_backups = strtoul(arg, &p, 0);
 896                         if (*p || num_backups > 2) {
 897                                 fprintf(stderr,
 898                                         _("Invalid # of backup "
 899                                           "superblocks: %s\n"),
 900                                         arg);
 901                                 r_usage++;
 902                                 continue;
 903                         }
 904                 } else if (strcmp(token, "packed_meta_blocks") == 0) {
 905                         if (arg)
 906                                 packed_meta_blocks = strtoul(arg, &p, 0);
 907                         else
 908                                 packed_meta_blocks = 1;
 909                         if (packed_meta_blocks)
 910                                 journal_location = 0;
 911                 } else if (strcmp(token, "stride") == 0) {
 912                         if (!arg) {
 913                                 r_usage++;
 914                                 badopt = token;
 915                                 continue;
 916                         }
 917                         param->s_raid_stride = strtoul(arg, &p, 0);
 918                         if (*p) {
 919                                 fprintf(stderr,
 920                                         _("Invalid stride parameter: %s\n"),
 921                                         arg);
 922                                 r_usage++;
 923                                 continue;
 924                         }
 925                 } else if (strcmp(token, "stripe-width") == 0 ||
 926                            strcmp(token, "stripe_width") == 0) {
 927                         if (!arg) {
 928                                 r_usage++;
 929                                 badopt = token;
 930                                 continue;
 931                         }
 932                         param->s_raid_stripe_width = strtoul(arg, &p, 0);
 933                         if (*p) {
 934                                 fprintf(stderr,
 935                                         _("Invalid stripe-width parameter: %s\n"),
 936                                         arg);
 937                                 r_usage++;
 938                                 continue;
 939                         }
 940                 } else if (!strcmp(token, "resize")) {
 941                         blk64_t resize;
 942                         unsigned long bpg, rsv_groups;
 943                         unsigned long group_desc_count, desc_blocks;
 944                         unsigned int gdpb, blocksize;
 945                         int rsv_gdb;
 946
 947                         if (!arg) {
 948                                 r_usage++;
 949                                 badopt = token;
 950                                 continue;
 951                         }
 952
 953                         resize = parse_num_blocks2(arg,
 954                                                    param->s_log_block_size);
 955
 956                         if (resize == 0) {
 957                                 fprintf(stderr,
 958                                         _("Invalid resize parameter: %s\n"),
 959                                         arg);
 960                                 r_usage++;
 961                                 continue;
 962                         }
 963                         if (resize <= ext2fs_blocks_count(param)) {
 964                                 fprintf(stderr, "%s",
 965                                         _("The resize maximum must be greater "
 966                                           "than the filesystem size.\n"));
 967                                 r_usage++;
 968                                 continue;
 969                         }
 970
 971                         blocksize = EXT2_BLOCK_SIZE(param);
 972                         bpg = param->s_blocks_per_group;
 973                         if (!bpg)
 974                                 bpg = blocksize * 8;
 975                         gdpb = EXT2_DESC_PER_BLOCK(param);
 976                         group_desc_count = (__u32) ext2fs_div64_ceil(
 977                                 ext2fs_blocks_count(param), bpg);
 978                         desc_blocks = (group_desc_count +
 979                                        gdpb - 1) / gdpb;
 980                         rsv_groups = ext2fs_div64_ceil(resize, bpg);
 981                         rsv_gdb = ext2fs_div_ceil(rsv_groups, gdpb) -
 982                                 desc_blocks;
 983                         if (rsv_gdb > (int) EXT2_ADDR_PER_BLOCK(param))
 984                                 rsv_gdb = EXT2_ADDR_PER_BLOCK(param);
 985
 986                         if (rsv_gdb > 0) {
 987                                 if (param->s_rev_level == EXT2_GOOD_OLD_REV) {
 988                                         fprintf(stderr, "%s",
 989         _("On-line resizing not supported with revision 0 filesystems\n"));
 990                                         free(buf);
 991                                         exit(1);
 992                                 }
 993                                 ext2fs_set_feature_resize_inode(param);
 994
 995                                 param->s_reserved_gdt_blocks = rsv_gdb;
 996                         }
 997                 } else if (!strcmp(token, "test_fs")) {
 998                         param->s_flags |= EXT2_FLAGS_TEST_FILESYS;
 999                 } else if (!strcmp(token, "lazy_itable_init")) {
1000                         if (arg)
1001                                 lazy_itable_init = strtoul(arg, &p, 0);
1002                         else
1003                                 lazy_itable_init = 1;
1004                 } else if (!strcmp(token, "lazy_journal_init")) {
1005                         if (arg)
1006                                 journal_flags |= strtoul(arg, &p, 0) ?
1007                                                 EXT2_MKJOURNAL_LAZYINIT : 0;
1008                         else
1009                                 journal_flags |= EXT2_MKJOURNAL_LAZYINIT;
1010                 } else if (!strcmp(token, "root_owner")) {
1011                         if (arg) {
1012                                 root_uid = strtoul(arg, &p, 0);
1013                                 if (*p != ':') {
1014                                         fprintf(stderr,
1015                                                 _("Invalid root_owner: '%s'\n"),
1016                                                 arg);
1017                                         r_usage++;
1018                                         continue;
1019                                 }
1020                                 p++;
1021                                 root_gid = strtoul(p, &p, 0);
1022                                 if (*p) {
1023                                         fprintf(stderr,
1024                                                 _("Invalid root_owner: '%s'\n"),
1025                                                 arg);
1026                                         r_usage++;
1027                                         continue;
1028                                 }
1029                         } else {
1030                                 root_uid = getuid();
1031                                 root_gid = getgid();
1032                         }
1033                 } else if (!strcmp(token, "discard")) {
1034                         discard = 1;
1035                 } else if (!strcmp(token, "nodiscard")) {
1036                         discard = 0;
1037                 } else if (!strcmp(token, "quotatype")) {
1038                         char *errtok = NULL;
1039
1040                         if (!arg) {
1041                                 r_usage++;
1042                                 badopt = token;
1043                                 continue;
1044                         }
1045                         quotatype_bits = 0;
1046                         ret = parse_quota_types(arg, &quotatype_bits, &errtok);
1047                         if (ret) {
1048                                 if (errtok) {
1049                                         fprintf(stderr,
1050                                 "Failed to parse quota type at %s", errtok);
1051                                         free(errtok);
1052                                 } else
1053                                         com_err(program_name, ret,
1054                                                 "while parsing quota type");
1055                                 r_usage++;
1056                                 badopt = token;
1057                                 continue;
1058                         }
1059                 } else if (!strcmp(token, "android_sparse")) {
1060                         android_sparse_file = 1;
1061                 } else if (!strcmp(token, "encoding")) {
1062                         if (!arg) {
1063                                 r_usage++;
1064                                 continue;
1065                         }
1066
1067                         encoding = e2p_str2encoding(arg);
1068                         if (encoding < 0) {
1069                                 fprintf(stderr, _("Invalid encoding: %s"), arg);
1070                                 r_usage++;
1071                                 continue;
1072                         }
1073                         param->s_encoding = encoding;
1074                         ext2fs_set_feature_casefold(param);
1075                 } else if (!strcmp(token, "encoding_flags")) {
1076                         if (!arg) {
1077                                 r_usage++;
1078                                 continue;
1079                         }
1080                         encoding_flags = arg;
1081                 } else {
1082                         r_usage++;
1083                         badopt = token;
1084                 }
1085         }
1086         if (r_usage) {
1087                 fprintf(stderr, _("\nBad option(s) specified: %s\n\n"
1088                         "Extended options are separated by commas, "
1089                         "and may take an argument which\n"
1090                         "\tis set off by an equals ('=') sign.\n\n"
1091                         "Valid extended options are:\n"
1092                         "\tmmp_update_interval=<interval>\n"
1093                         "\tnum_backup_sb=<0|1|2>\n"
1094                         "\tstride=<RAID per-disk data chunk in blocks>\n"
1095                         "\tstripe-width=<RAID stride * data disks in blocks>\n"
1096                         "\toffset=<offset to create the file system>\n"
1097                         "\tresize=<resize maximum size in blocks>\n"
1098                         "\tpacked_meta_blocks=<0 to disable, 1 to enable>\n"
1099                         "\tlazy_itable_init=<0 to disable, 1 to enable>\n"
1100                         "\tlazy_journal_init=<0 to disable, 1 to enable>\n"
1101                         "\troot_owner=<uid of root dir>:<gid of root dir>\n"
1102                         "\ttest_fs\n"
1103                         "\tdiscard\n"
1104                         "\tnodiscard\n"
1105                         "\encoding=<encoding>\n"
1106                         "\tencoding_flags=<flags>\n"
1107                         "\tquotatype=<quota type(s) to be enabled>\n\n"),
1108                         badopt ? badopt : "");
1109                 free(buf);
1110                 exit(1);
1111         }
1112         if (param->s_raid_stride &&
1113             (param->s_raid_stripe_width % param->s_raid_stride) != 0)
1114                 fprintf(stderr, _("\nWarning: RAID stripe-width %u not an even "
1115                                   "multiple of stride %u.\n\n"),
1116                         param->s_raid_stripe_width, param->s_raid_stride);
1117
1118         if (ext2fs_has_feature_casefold(param)) {
1119                 param->s_encoding_flags =
1120                         e2p_get_encoding_flags(param->s_encoding);
1121
1122                 if (encoding_flags &&
1123                     e2p_str2encoding_flags(param->s_encoding, encoding_flags,
1124                                            &param->s_encoding_flags)) {
1125                         fprintf(stderr, _("error: Invalid encoding flag: %s\n"),
1126                                 encoding_flags);
1127                         free(buf);
1128                         exit(1);
1129                 }
1130         } else if (encoding_flags) {
1131                 fprintf(stderr, _("error: An encoding must be explicitly "
1132                                   "specified when passing encoding-flags\n"));
1133                 free(buf);
1134                 exit(1);
1135         }
1136
1137         free(buf);
1138 }
1139
1140 static __u32 ok_features[3] = {
1141         /* Compat */
1142         EXT3_FEATURE_COMPAT_HAS_JOURNAL |
1143                 EXT2_FEATURE_COMPAT_RESIZE_INODE |
1144                 EXT2_FEATURE_COMPAT_DIR_INDEX |
1145                 EXT2_FEATURE_COMPAT_EXT_ATTR |
1146                 EXT4_FEATURE_COMPAT_SPARSE_SUPER2,
1147         /* Incompat */
1148         EXT2_FEATURE_INCOMPAT_FILETYPE|
1149                 EXT3_FEATURE_INCOMPAT_EXTENTS|
1150                 EXT3_FEATURE_INCOMPAT_JOURNAL_DEV|
1151                 EXT2_FEATURE_INCOMPAT_META_BG|
1152                 EXT4_FEATURE_INCOMPAT_FLEX_BG|
1153                 EXT4_FEATURE_INCOMPAT_EA_INODE|
1154                 EXT4_FEATURE_INCOMPAT_MMP |
1155                 EXT4_FEATURE_INCOMPAT_64BIT|
1156                 EXT4_FEATURE_INCOMPAT_INLINE_DATA|
1157                 EXT4_FEATURE_INCOMPAT_ENCRYPT |
1158                 EXT4_FEATURE_INCOMPAT_CASEFOLD |
1159                 EXT4_FEATURE_INCOMPAT_CSUM_SEED |
1160                 EXT4_FEATURE_INCOMPAT_LARGEDIR,
1161         /* R/O compat */
1162         EXT2_FEATURE_RO_COMPAT_LARGE_FILE|
1163                 EXT4_FEATURE_RO_COMPAT_HUGE_FILE|
1164                 EXT4_FEATURE_RO_COMPAT_DIR_NLINK|
1165                 EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE|
1166                 EXT2_FEATURE_RO_COMPAT_SPARSE_SUPER|
1167                 EXT4_FEATURE_RO_COMPAT_GDT_CSUM|
1168                 EXT4_FEATURE_RO_COMPAT_BIGALLOC|
1169                 EXT4_FEATURE_RO_COMPAT_QUOTA|
1170                 EXT4_FEATURE_RO_COMPAT_METADATA_CSUM|
1171                 EXT4_FEATURE_RO_COMPAT_PROJECT|
1172                 EXT4_FEATURE_RO_COMPAT_VERITY
1173 };
1174
1175
1176 static void syntax_err_report(const char *filename, long err, int line_num)
1177 {
1178         fprintf(stderr,
1179                 _("Syntax error in mke2fs config file (%s, line #%d)\n\t%s\n"),
1180                 filename, line_num, error_message(err));
1181         exit(1);
1182 }
1183
1184 static const char *config_fn[] = { ROOT_SYSCONFDIR "/mke2fs.conf", 0 };
1185
1186 static void edit_feature(const char *str, __u32 *compat_array)
1187 {
1188         if (!str)
1189                 return;
1190
1191         if (e2p_edit_feature(str, compat_array, ok_features)) {
1192                 fprintf(stderr, _("Invalid filesystem option set: %s\n"),
1193                         str);
1194                 exit(1);
1195         }
1196 }
1197
1198 static void edit_mntopts(const char *str, __u32 *mntopts)
1199 {
1200         if (!str)
1201                 return;
1202
1203         if (e2p_edit_mntopts(str, mntopts, ~0)) {
1204                 fprintf(stderr, _("Invalid mount option set: %s\n"),
1205                         str);
1206                 exit(1);
1207         }
1208 }
1209
1210 struct str_list {
1211         char **list;
1212         int num;
1213         int max;
1214 };
1215
1216 static errcode_t init_list(struct str_list *sl)
1217 {
1218         sl->num = 0;
1219         sl->max = 1;
1220         sl->list = malloc((sl->max+1) * sizeof(char *));
1221         if (!sl->list)
1222                 return ENOMEM;
1223         sl->list[0] = 0;
1224         return 0;
1225 }
1226
1227 static errcode_t push_string(struct str_list *sl, const char *str)
1228 {
1229         char **new_list;
1230
1231         if (sl->num >= sl->max) {
1232                 sl->max += 2;
1233                 new_list = realloc(sl->list, (sl->max+1) * sizeof(char *));
1234                 if (!new_list)
1235                         return ENOMEM;
1236                 sl->list = new_list;
1237         }
1238         sl->list[sl->num] = malloc(strlen(str)+1);
1239         if (sl->list[sl->num] == 0)
1240                 return ENOMEM;
1241         strcpy(sl->list[sl->num], str);
1242         sl->num++;
1243         sl->list[sl->num] = 0;
1244         return 0;
1245 }
1246
1247 static void print_str_list(char **list)
1248 {
1249         char **cpp;
1250
1251         for (cpp = list; *cpp; cpp++) {
1252                 printf("'%s'", *cpp);
1253                 if (cpp[1])
1254                         fputs(", ", stdout);
1255         }
1256         fputc('\n', stdout);
1257 }
1258
1259 /*
1260  * Return TRUE if the profile has the given subsection
1261  */
1262 static int profile_has_subsection(profile_t prof, const char *section,
1263                                   const char *subsection)
1264 {
1265         void                    *state;
1266         const char              *names[4];
1267         char                    *name;
1268         int                     ret = 0;
1269
1270         names[0] = section;
1271         names[1] = subsection;
1272         names[2] = 0;
1273
1274         if (profile_iterator_create(prof, names,
1275                                     PROFILE_ITER_LIST_SECTION |
1276                                     PROFILE_ITER_RELATIONS_ONLY, &state))
1277                 return 0;
1278
1279         if ((profile_iterator(&state, &name, 0) == 0) && name) {
1280                 free(name);
1281                 ret = 1;
1282         }
1283
1284         profile_iterator_free(&state);
1285         return ret;
1286 }
1287
1288 static char **parse_fs_type(const char *fs_type,
1289                             const char *usage_types,
1290                             struct ext2_super_block *sb,
1291                             blk64_t fs_blocks_count,
1292                             char *progname)
1293 {
1294         const char      *ext_type = 0;
1295         char            *parse_str;
1296         char            *profile_type = 0;
1297         char            *cp, *t;
1298         const char      *size_type;
1299         struct str_list list;
1300         unsigned long long meg;
1301         int             is_hurd = for_hurd(creator_os);
1302
1303         if (init_list(&list))
1304                 return 0;
1305
1306         if (fs_type)
1307                 ext_type = fs_type;
1308         else if (is_hurd)
1309                 ext_type = "ext2";
1310         else if (!strcmp(program_name, "mke3fs"))
1311                 ext_type = "ext3";
1312         else if (!strcmp(program_name, "mke4fs"))
1313                 ext_type = "ext4";
1314         else if (progname) {
1315                 ext_type = strrchr(progname, '/');
1316                 if (ext_type)
1317                         ext_type++;
1318                 else
1319                         ext_type = progname;
1320
1321                 if (!strncmp(ext_type, "mkfs.", 5)) {
1322                         ext_type += 5;
1323                         if (ext_type[0] == 0)
1324                                 ext_type = 0;
1325                 } else
1326                         ext_type = 0;
1327         }
1328
1329         if (!ext_type) {
1330                 profile_get_string(profile, "defaults", "fs_type", 0,
1331                                    "ext2", &profile_type);
1332                 ext_type = profile_type;
1333                 if (!strcmp(ext_type, "ext2") && (journal_size != 0))
1334                         ext_type = "ext3";
1335         }
1336
1337
1338         if (!profile_has_subsection(profile, "fs_types", ext_type) &&
1339             strcmp(ext_type, "ext2")) {
1340                 printf(_("\nYour mke2fs.conf file does not define the "
1341                          "%s filesystem type.\n"), ext_type);
1342                 if (!strcmp(ext_type, "ext3") || !strcmp(ext_type, "ext4") ||
1343                     !strcmp(ext_type, "ext4dev")) {
1344                         printf("%s", _("You probably need to install an "
1345                                        "updated mke2fs.conf file.\n\n"));
1346                 }
1347                 if (!force) {
1348                         printf("%s", _("Aborting...\n"));
1349                         exit(1);
1350                 }
1351         }
1352
1353         meg = (1024 * 1024) / EXT2_BLOCK_SIZE(sb);
1354         if (fs_blocks_count < 3 * meg)
1355                 size_type = "floppy";
1356         else if (fs_blocks_count < 512 * meg)
1357                 size_type = "small";
1358         else if (fs_blocks_count < 4 * 1024 * 1024 * meg)
1359                 size_type = "default";
1360         else if (fs_blocks_count < 16 * 1024 * 1024 * meg)
1361                 size_type = "big";
1362         else
1363                 size_type = "huge";
1364
1365         if (!usage_types)
1366                 usage_types = size_type;
1367
1368         parse_str = malloc(strlen(usage_types)+1);
1369         if (!parse_str) {
1370                 free(profile_type);
1371                 free(list.list);
1372                 return 0;
1373         }
1374         strcpy(parse_str, usage_types);
1375
1376         if (ext_type)
1377                 push_string(&list, ext_type);
1378         cp = parse_str;
1379         while (1) {
1380                 t = strchr(cp, ',');
1381                 if (t)
1382                         *t = '\0';
1383
1384                 if (*cp) {
1385                         if (profile_has_subsection(profile, "fs_types", cp))
1386                                 push_string(&list, cp);
1387                         else if (strcmp(cp, "default") != 0)
1388                                 fprintf(stderr,
1389                                         _("\nWarning: the fs_type %s is not "
1390                                           "defined in mke2fs.conf\n\n"),
1391                                         cp);
1392                 }
1393                 if (t)
1394                         cp = t+1;
1395                 else
1396                         break;
1397         }
1398         free(parse_str);
1399         free(profile_type);
1400         if (is_hurd)
1401                 push_string(&list, "hurd");
1402         return (list.list);
1403 }
1404
1405 char *get_string_from_profile(char **types, const char *opt,
1406                                      const char *def_val)
1407 {
1408         char *ret = 0;
1409         int i;
1410
1411         for (i=0; types[i]; i++);
1412         for (i-=1; i >=0 ; i--) {
1413                 profile_get_string(profile, "fs_types", types[i],
1414                                    opt, 0, &ret);
1415                 if (ret)
1416                         return ret;
1417         }
1418         profile_get_string(profile, "defaults", opt, 0, def_val, &ret);
1419         return (ret);
1420 }
1421
1422 int get_int_from_profile(char **types, const char *opt, int def_val)
1423 {
1424         int ret;
1425         char **cpp;
1426
1427         profile_get_integer(profile, "defaults", opt, 0, def_val, &ret);
1428         for (cpp = types; *cpp; cpp++)
1429                 profile_get_integer(profile, "fs_types", *cpp, opt, ret, &ret);
1430         return ret;
1431 }
1432
1433 static unsigned int get_uint_from_profile(char **types, const char *opt,
1434                                         unsigned int def_val)
1435 {
1436         unsigned int ret;
1437         char **cpp;
1438
1439         profile_get_uint(profile, "defaults", opt, 0, def_val, &ret);
1440         for (cpp = types; *cpp; cpp++)
1441                 profile_get_uint(profile, "fs_types", *cpp, opt, ret, &ret);
1442         return ret;
1443 }
1444
1445 static double get_double_from_profile(char **types, const char *opt,
1446                                       double def_val)
1447 {
1448         double ret;
1449         char **cpp;
1450
1451         profile_get_double(profile, "defaults", opt, 0, def_val, &ret);
1452         for (cpp = types; *cpp; cpp++)
1453                 profile_get_double(profile, "fs_types", *cpp, opt, ret, &ret);
1454         return ret;
1455 }
1456
1457 int get_bool_from_profile(char **types, const char *opt, int def_val)
1458 {
1459         int ret;
1460         char **cpp;
1461
1462         profile_get_boolean(profile, "defaults", opt, 0, def_val, &ret);
1463         for (cpp = types; *cpp; cpp++)
1464                 profile_get_boolean(profile, "fs_types", *cpp, opt, ret, &ret);
1465         return ret;
1466 }
1467
1468 extern const char *mke2fs_default_profile;
1469 static const char *default_files[] = { "<default>", 0 };
1470
1471 #ifdef HAVE_BLKID_PROBE_GET_TOPOLOGY
1472 /*
1473  * Sets the geometry of a device (stripe/stride), and returns the
1474  * device's alignment offset, if any, or a negative error.
1475  */
1476 static int get_device_geometry(const char *file,
1477                                struct ext2_super_block *param,
1478                                unsigned int psector_size)
1479 {
1480         int rc = -1;
1481         unsigned int blocksize;
1482         blkid_probe pr;
1483         blkid_topology tp;
1484         unsigned long min_io;
1485         unsigned long opt_io;
1486         struct stat statbuf;
1487
1488         /* Nothing to do for a regular file */
1489         if (!stat(file, &statbuf) && S_ISREG(statbuf.st_mode))
1490                 return 0;
1491
1492         pr = blkid_new_probe_from_filename(file);
1493         if (!pr)
1494                 goto out;
1495
1496         tp = blkid_probe_get_topology(pr);
1497         if (!tp)
1498                 goto out;
1499
1500         min_io = blkid_topology_get_minimum_io_size(tp);
1501         opt_io = blkid_topology_get_optimal_io_size(tp);
1502         blocksize = EXT2_BLOCK_SIZE(param);
1503         if ((min_io == 0) && (psector_size > blocksize))
1504                 min_io = psector_size;
1505         if ((opt_io == 0) && min_io)
1506                 opt_io = min_io;
1507         if ((opt_io == 0) && (psector_size > blocksize))
1508                 opt_io = psector_size;
1509
1510         /* setting stripe/stride to blocksize is pointless */
1511         if (min_io > blocksize)
1512                 param->s_raid_stride = min_io / blocksize;
1513         if (opt_io > blocksize)
1514                 param->s_raid_stripe_width = opt_io / blocksize;
1515
1516         rc = blkid_topology_get_alignment_offset(tp);
1517 out:
1518         blkid_free_probe(pr);
1519         return rc;
1520 }
1521 #endif
1522
1523 static void PRS(int argc, char *argv[])
1524 {
1525         int             b, c, flags;
1526         int             cluster_size = 0;
1527         char            *tmp, **cpp;
1528         int             explicit_fssize = 0;
1529         int             blocksize = 0;
1530         int             inode_ratio = 0;
1531         int             inode_size = 0;
1532         unsigned long   flex_bg_size = 0;
1533         double          reserved_ratio = -1.0;
1534         int             lsector_size = 0, psector_size = 0;
1535         int             show_version_only = 0, is_device = 0;
1536         unsigned long long num_inodes = 0; /* unsigned long long to catch too-large input */
1537         errcode_t       retval;
1538         char *          oldpath = getenv("PATH");
1539         char *          extended_opts = 0;
1540         char *          fs_type = 0;
1541         char *          usage_types = 0;
1542         /*
1543          * NOTE: A few words about fs_blocks_count and blocksize:
1544          *
1545          * Initially, blocksize is set to zero, which implies 1024.
1546          * If -b is specified, blocksize is updated to the user's value.
1547          *
1548          * Next, the device size or the user's "blocks" command line argument
1549          * is used to set fs_blocks_count; the units are blocksize.
1550          *
1551          * Later, if blocksize hasn't been set and the profile specifies a
1552          * blocksize, then blocksize is updated and fs_blocks_count is scaled
1553          * appropriately.  Note the change in units!
1554          *
1555          * Finally, we complain about fs_blocks_count > 2^32 on a non-64bit fs.
1556          */
1557         blk64_t         fs_blocks_count = 0;
1558         long            sysval;
1559         int             s_opt = -1, r_opt = -1;
1560         char            *fs_features = 0;
1561         int             fs_features_size = 0;
1562         int             use_bsize;
1563         char            *newpath;
1564         int             pathlen = sizeof(PATH_SET) + 1;
1565
1566         if (oldpath)
1567                 pathlen += strlen(oldpath);
1568         newpath = malloc(pathlen);
1569         if (!newpath) {
1570                 fprintf(stderr, "%s",
1571                         _("Couldn't allocate memory for new PATH.\n"));
1572                 exit(1);
1573         }
1574         strcpy(newpath, PATH_SET);
1575
1576         /* Update our PATH to include /sbin  */
1577         if (oldpath) {
1578                 strcat (newpath, ":");
1579                 strcat (newpath, oldpath);
1580         }
1581         putenv (newpath);
1582
1583         /* Determine the system page size if possible */
1584 #ifdef HAVE_SYSCONF
1585 #if (!defined(_SC_PAGESIZE) && defined(_SC_PAGE_SIZE))
1586 #define _SC_PAGESIZE _SC_PAGE_SIZE
1587 #endif
1588 #ifdef _SC_PAGESIZE
1589         sysval = sysconf(_SC_PAGESIZE);
1590         if (sysval > 0)
1591                 sys_page_size = sysval;
1592 #endif /* _SC_PAGESIZE */
1593 #endif /* HAVE_SYSCONF */
1594
1595         if ((tmp = getenv("MKE2FS_CONFIG")) != NULL)
1596                 config_fn[0] = tmp;
1597         profile_set_syntax_err_cb(syntax_err_report);
1598         retval = profile_init(config_fn, &profile);
1599         if (retval == ENOENT) {
1600                 retval = profile_init(default_files, &profile);
1601                 if (retval)
1602                         goto profile_error;
1603                 retval = profile_set_default(profile, mke2fs_default_profile);
1604                 if (retval)
1605                         goto profile_error;
1606         } else if (retval) {
1607 profile_error:
1608                 fprintf(stderr, _("Couldn't init profile successfully"
1609                                   " (error: %ld).\n"), retval);
1610                 exit(1);
1611         }
1612
1613         setbuf(stdout, NULL);
1614         setbuf(stderr, NULL);
1615         add_error_table(&et_ext2_error_table);
1616         add_error_table(&et_prof_error_table);
1617         memset(&fs_param, 0, sizeof(struct ext2_super_block));
1618         fs_param.s_rev_level = 1;  /* Create revision 1 filesystems now */
1619
1620         if (is_before_linux_ver(2, 2, 0))
1621                 fs_param.s_rev_level = 0;
1622
1623         if (argc && *argv) {
1624                 program_name = get_progname(*argv);
1625
1626                 /* If called as mkfs.ext3, create a journal inode */
1627                 if (!strcmp(program_name, "mkfs.ext3") ||
1628                     !strcmp(program_name, "mke3fs"))
1629                         journal_size = -1;
1630         }
1631
1632         while ((c = getopt (argc, argv,
1633                     "b:cd:e:g:i:jl:m:no:qr:s:t:vC:DE:FG:I:J:KL:M:N:O:R:ST:U:Vz:")) != EOF) {
1634                 switch (c) {
1635                 case 'b':
1636                         blocksize = parse_num_blocks2(optarg, -1);
1637                         b = (blocksize > 0) ? blocksize : -blocksize;
1638                         if (b < EXT2_MIN_BLOCK_SIZE ||
1639                             b > EXT2_MAX_BLOCK_SIZE) {
1640                                 com_err(program_name, 0,
1641                                         _("invalid block size - %s"), optarg);
1642                                 exit(1);
1643                         }
1644                         if (blocksize > 4096)
1645                                 fprintf(stderr, _("Warning: blocksize %d not "
1646                                                   "usable on most systems.\n"),
1647                                         blocksize);
1648                         if (blocksize > 0)
1649                                 fs_param.s_log_block_size =
1650                                         int_log2(blocksize >>
1651                                                  EXT2_MIN_BLOCK_LOG_SIZE);
1652                         break;
1653                 case 'c':       /* Check for bad blocks */
1654                         cflag++;
1655                         break;
1656                 case 'C':
1657                         cluster_size = parse_num_blocks2(optarg, -1);
1658                         if (cluster_size <= EXT2_MIN_CLUSTER_SIZE ||
1659                             cluster_size > EXT2_MAX_CLUSTER_SIZE) {
1660                                 com_err(program_name, 0,
1661                                         _("invalid cluster size - %s"),
1662                                         optarg);
1663                                 exit(1);
1664                         }
1665                         break;
1666                 case 'd':
1667                         src_root_dir = optarg;
1668                         break;
1669                 case 'D':
1670                         direct_io = 1;
1671                         break;
1672                 case 'R':
1673                         com_err(program_name, 0, "%s",
1674                                 _("'-R' is deprecated, use '-E' instead"));
1675                         /* fallthrough */
1676                 case 'E':
1677                         extended_opts = optarg;
1678                         break;
1679                 case 'e':
1680                         if (strcmp(optarg, "continue") == 0)
1681                                 errors_behavior = EXT2_ERRORS_CONTINUE;
1682                         else if (strcmp(optarg, "remount-ro") == 0)
1683                                 errors_behavior = EXT2_ERRORS_RO;
1684                         else if (strcmp(optarg, "panic") == 0)
1685                                 errors_behavior = EXT2_ERRORS_PANIC;
1686                         else {
1687                                 com_err(program_name, 0,
1688                                         _("bad error behavior - %s"),
1689                                         optarg);
1690                                 usage();
1691                         }
1692                         break;
1693                 case 'F':
1694                         force++;
1695                         break;
1696                 case 'g':
1697                         fs_param.s_blocks_per_group = strtoul(optarg, &tmp, 0);
1698                         if (*tmp) {
1699                                 com_err(program_name, 0, "%s",
1700                                 _("Illegal number for blocks per group"));
1701                                 exit(1);
1702                         }
1703                         if ((fs_param.s_blocks_per_group % 8) != 0) {
1704                                 com_err(program_name, 0, "%s",
1705                                 _("blocks per group must be multiple of 8"));
1706                                 exit(1);
1707                         }
1708                         break;
1709                 case 'G':
1710                         flex_bg_size = strtoul(optarg, &tmp, 0);
1711                         if (*tmp) {
1712                                 com_err(program_name, 0, "%s",
1713                                         _("Illegal number for flex_bg size"));
1714                                 exit(1);
1715                         }
1716                         if (flex_bg_size < 1 ||
1717                             (flex_bg_size & (flex_bg_size-1)) != 0) {
1718                                 com_err(program_name, 0, "%s",
1719                                         _("flex_bg size must be a power of 2"));
1720                                 exit(1);
1721                         }
1722                         if (flex_bg_size > MAX_32_NUM) {
1723                                 com_err(program_name, 0,
1724                                 _("flex_bg size (%lu) must be less than"
1725                                 " or equal to 2^31"), flex_bg_size);
1726                                 exit(1);
1727                         }
1728                         break;
1729                 case 'i':
1730                         inode_ratio = parse_num_blocks(optarg, -1);
1731                         if (inode_ratio < EXT2_MIN_BLOCK_SIZE ||
1732                             inode_ratio > EXT2_MAX_BLOCK_SIZE * 1024) {
1733                                 com_err(program_name, 0,
1734                                         _("invalid inode ratio %s (min %d/max %d)"),
1735                                         optarg, EXT2_MIN_BLOCK_SIZE,
1736                                         EXT2_MAX_BLOCK_SIZE * 1024);
1737                                 exit(1);
1738                         }
1739                         break;
1740                 case 'I':
1741                         inode_size = strtoul(optarg, &tmp, 0);
1742                         if (*tmp) {
1743                                 com_err(program_name, 0,
1744                                         _("invalid inode size - %s"), optarg);
1745                                 exit(1);
1746                         }
1747                         break;
1748                 case 'j':
1749                         if (!journal_size)
1750                                 journal_size = -1;
1751                         break;
1752                 case 'J':
1753                         parse_journal_opts(optarg);
1754                         break;
1755                 case 'K':
1756                         fprintf(stderr, "%s",
1757                                 _("Warning: -K option is deprecated and "
1758                                   "should not be used anymore. Use "
1759                                   "\'-E nodiscard\' extended option "
1760                                   "instead!\n"));
1761                         discard = 0;
1762                         break;
1763                 case 'l':
1764                         bad_blocks_filename = realloc(bad_blocks_filename,
1765                                                       strlen(optarg) + 1);
1766                         if (!bad_blocks_filename) {
1767                                 com_err(program_name, ENOMEM, "%s",
1768                                         _("in malloc for bad_blocks_filename"));
1769                                 exit(1);
1770                         }
1771                         strcpy(bad_blocks_filename, optarg);
1772                         break;
1773                 case 'L':
1774                         volume_label = optarg;
1775                         if (strlen(volume_label) > EXT2_LABEL_LEN) {
1776                                 volume_label[EXT2_LABEL_LEN] = '\0';
1777                                 fprintf(stderr, _("Warning: label too long; will be truncated to '%s'\n\n"),
1778                                         volume_label);
1779                         }
1780                         break;
1781                 case 'm':
1782                         reserved_ratio = strtod(optarg, &tmp);
1783                         if ( *tmp || reserved_ratio > 50 ||
1784                              reserved_ratio < 0) {
1785                                 com_err(program_name, 0,
1786                                         _("invalid reserved blocks percent - %s"),
1787                                         optarg);
1788                                 exit(1);
1789                         }
1790                         break;
1791                 case 'M':
1792                         mount_dir = optarg;
1793                         break;
1794                 case 'n':
1795                         noaction++;
1796                         break;
1797                 case 'N':
1798                         num_inodes = strtoul(optarg, &tmp, 0);
1799                         if (*tmp) {
1800                                 com_err(program_name, 0,
1801                                         _("bad num inodes - %s"), optarg);
1802                                         exit(1);
1803                         }
1804                         break;
1805                 case 'o':
1806                         creator_os = optarg;
1807                         break;
1808                 case 'O':
1809                         retval = ext2fs_resize_mem(fs_features_size,
1810                                    fs_features_size + 1 + strlen(optarg),
1811                                                    &fs_features);
1812                         if (retval) {
1813                                 com_err(program_name, retval,
1814                                      _("while allocating fs_feature string"));
1815                                 exit(1);
1816                         }
1817                         if (fs_features_size)
1818                                 strcat(fs_features, ",");
1819                         else
1820                                 fs_features[0] = 0;
1821                         strcat(fs_features, optarg);
1822                         fs_features_size += 1 + strlen(optarg);
1823                         break;
1824                 case 'q':
1825                         quiet = 1;
1826                         break;
1827                 case 'r':
1828                         r_opt = strtoul(optarg, &tmp, 0);
1829                         if (*tmp) {
1830                                 com_err(program_name, 0,
1831                                         _("bad revision level - %s"), optarg);
1832                                 exit(1);
1833                         }
1834                         if (r_opt > EXT2_MAX_SUPP_REV) {
1835                                 com_err(program_name, EXT2_ET_REV_TOO_HIGH,
1836                                         _("while trying to create revision %d"), r_opt);
1837                                 exit(1);
1838                         }
1839                         fs_param.s_rev_level = r_opt;
1840                         break;
1841                 case 's':       /* deprecated */
1842                         s_opt = atoi(optarg);
1843                         break;
1844                 case 'S':
1845                         super_only = 1;
1846                         break;
1847                 case 't':
1848                         if (fs_type) {
1849                                 com_err(program_name, 0, "%s",
1850                                     _("The -t option may only be used once"));
1851                                 exit(1);
1852                         }
1853                         fs_type = strdup(optarg);
1854                         break;
1855                 case 'T':
1856                         if (usage_types) {
1857                                 com_err(program_name, 0, "%s",
1858                                     _("The -T option may only be used once"));
1859                                 exit(1);
1860                         }
1861                         usage_types = strdup(optarg);
1862                         break;
1863                 case 'U':
1864                         fs_uuid = optarg;
1865                         break;
1866                 case 'v':
1867                         verbose = 1;
1868                         break;
1869                 case 'V':
1870                         /* Print version number and exit */
1871                         show_version_only++;
1872                         break;
1873                 case 'z':
1874                         undo_file = optarg;
1875                         break;
1876                 default:
1877                         usage();
1878                 }
1879         }
1880         if ((optind == argc) && !show_version_only)
1881                 usage();
1882         device_name = argv[optind++];
1883
1884         if (!quiet || show_version_only)
1885                 fprintf (stderr, "mke2fs %s (%s)\n", E2FSPROGS_VERSION,
1886                          E2FSPROGS_DATE);
1887
1888         if (show_version_only) {
1889                 fprintf(stderr, _("\tUsing %s\n"),
1890                         error_message(EXT2_ET_BASE));
1891                 exit(0);
1892         }
1893
1894         /*
1895          * If there's no blocksize specified and there is a journal
1896          * device, use it to figure out the blocksize
1897          */
1898         if (blocksize <= 0 && journal_device) {
1899                 ext2_filsys     jfs;
1900                 io_manager      io_ptr;
1901
1902 #ifdef CONFIG_TESTIO_DEBUG
1903                 if (getenv("TEST_IO_FLAGS") || getenv("TEST_IO_BLOCK")) {
1904                         io_ptr = test_io_manager;
1905                         test_io_backing_manager = unix_io_manager;
1906                 } else
1907 #endif
1908                         io_ptr = unix_io_manager;
1909                 retval = ext2fs_open(journal_device,
1910                                      EXT2_FLAG_JOURNAL_DEV_OK, 0,
1911                                      0, io_ptr, &jfs);
1912                 if (retval) {
1913                         com_err(program_name, retval,
1914                                 _("while trying to open journal device %s\n"),
1915                                 journal_device);
1916                         exit(1);
1917                 }
1918                 if ((blocksize < 0) && (jfs->blocksize < (unsigned) (-blocksize))) {
1919                         com_err(program_name, 0,
1920                                 _("Journal dev blocksize (%d) smaller than "
1921                                   "minimum blocksize %d\n"), jfs->blocksize,
1922                                 -blocksize);
1923                         exit(1);
1924                 }
1925                 blocksize = jfs->blocksize;
1926                 printf(_("Using journal device's blocksize: %d\n"), blocksize);
1927                 fs_param.s_log_block_size =
1928                         int_log2(blocksize >> EXT2_MIN_BLOCK_LOG_SIZE);
1929                 ext2fs_close_free(&jfs);
1930         }
1931
1932         if (optind < argc) {
1933                 fs_blocks_count = parse_num_blocks2(argv[optind++],
1934                                                    fs_param.s_log_block_size);
1935                 if (!fs_blocks_count) {
1936                         com_err(program_name, 0,
1937                                 _("invalid blocks '%s' on device '%s'"),
1938                                 argv[optind - 1], device_name);
1939                         exit(1);
1940                 }
1941         }
1942         if (optind < argc)
1943                 usage();
1944
1945         profile_get_integer(profile, "options", "sync_kludge", 0, 0,
1946                             &sync_kludge);
1947         tmp = getenv("MKE2FS_SYNC");
1948         if (tmp)
1949                 sync_kludge = atoi(tmp);
1950
1951         profile_get_integer(profile, "options", "proceed_delay", 0, 0,
1952                             &proceed_delay);
1953
1954         /* The isatty() test is so we don't break existing scripts */
1955         flags = CREATE_FILE;
1956         if (isatty(0) && isatty(1) && !offset)
1957                 flags |= CHECK_FS_EXIST;
1958         if (!quiet)
1959                 flags |= VERBOSE_CREATE;
1960         if (fs_blocks_count == 0)
1961                 flags |= NO_SIZE;
1962         else
1963                 explicit_fssize = 1;
1964         if (!check_plausibility(device_name, flags, &is_device) && !force)
1965                 proceed_question(proceed_delay);
1966
1967         check_mount(device_name, force, _("filesystem"));
1968
1969         /* Determine the size of the device (if possible) */
1970         if (noaction && fs_blocks_count) {
1971                 dev_size = fs_blocks_count;
1972                 retval = 0;
1973         } else
1974 #ifndef _WIN32
1975                 retval = ext2fs_get_device_size2(device_name,
1976                                                  EXT2_BLOCK_SIZE(&fs_param),
1977                                                  &dev_size);
1978 #else
1979                 retval = ext2fs_get_device_size(device_name,
1980                                                 EXT2_BLOCK_SIZE(&fs_param),
1981                                                 &dev_size);
1982 #endif
1983         if (retval && (retval != EXT2_ET_UNIMPLEMENTED)) {
1984                 com_err(program_name, retval, "%s",
1985                         _("while trying to determine filesystem size"));
1986                 exit(1);
1987         }
1988         if (!fs_blocks_count) {
1989                 if (retval == EXT2_ET_UNIMPLEMENTED) {
1990                         com_err(program_name, 0, "%s",
1991                                 _("Couldn't determine device size; you "
1992                                 "must specify\nthe size of the "
1993                                 "filesystem\n"));
1994                         exit(1);
1995                 } else {
1996                         if (dev_size == 0) {
1997                                 com_err(program_name, 0, "%s",
1998                                 _("Device size reported to be zero.  "
1999                                   "Invalid partition specified, or\n\t"
2000                                   "partition table wasn't reread "
2001                                   "after running fdisk, due to\n\t"
2002                                   "a modified partition being busy "
2003                                   "and in use.  You may need to reboot\n\t"
2004                                   "to re-read your partition table.\n"
2005                                   ));
2006                                 exit(1);
2007                         }
2008                         fs_blocks_count = dev_size;
2009                         if (sys_page_size > EXT2_BLOCK_SIZE(&fs_param))
2010                                 fs_blocks_count &= ~((blk64_t) ((sys_page_size /
2011                                              EXT2_BLOCK_SIZE(&fs_param))-1));
2012                 }
2013         } else if (!force && is_device && (fs_blocks_count > dev_size)) {
2014                 com_err(program_name, 0, "%s",
2015                         _("Filesystem larger than apparent device size."));
2016                 proceed_question(proceed_delay);
2017         }
2018
2019         if (!fs_type)
2020                 profile_get_string(profile, "devices", device_name,
2021                                    "fs_type", 0, &fs_type);
2022         if (!usage_types)
2023                 profile_get_string(profile, "devices", device_name,
2024                                    "usage_types", 0, &usage_types);
2025
2026         /*
2027          * We have the file system (or device) size, so we can now
2028          * determine the appropriate file system types so the fs can
2029          * be appropriately configured.
2030          */
2031         fs_types = parse_fs_type(fs_type, usage_types, &fs_param,
2032                                  fs_blocks_count ? fs_blocks_count : dev_size,
2033                                  argv[0]);
2034         if (!fs_types) {
2035                 fprintf(stderr, "%s", _("Failed to parse fs types list\n"));
2036                 exit(1);
2037         }
2038
2039         /* Figure out what features should be enabled */
2040
2041         tmp = NULL;
2042         if (fs_param.s_rev_level != EXT2_GOOD_OLD_REV) {
2043                 tmp = get_string_from_profile(fs_types, "base_features",
2044                       "sparse_super,large_file,filetype,resize_inode,dir_index");
2045                 edit_feature(tmp, &fs_param.s_feature_compat);
2046                 free(tmp);
2047
2048                 /* And which mount options as well */
2049                 tmp = get_string_from_profile(fs_types, "default_mntopts",
2050                                               "acl,user_xattr");
2051                 edit_mntopts(tmp, &fs_param.s_default_mount_opts);
2052                 if (tmp)
2053                         free(tmp);
2054
2055                 for (cpp = fs_types; *cpp; cpp++) {
2056                         tmp = NULL;
2057                         profile_get_string(profile, "fs_types", *cpp,
2058                                            "features", "", &tmp);
2059                         if (tmp && *tmp)
2060                                 edit_feature(tmp, &fs_param.s_feature_compat);
2061                         if (tmp)
2062                                 free(tmp);
2063                 }
2064                 tmp = get_string_from_profile(fs_types, "default_features",
2065                                               "");
2066         }
2067         /* Mask off features which aren't supported by the Hurd */
2068         if (for_hurd(creator_os)) {
2069                 ext2fs_clear_feature_filetype(&fs_param);
2070                 ext2fs_clear_feature_huge_file(&fs_param);
2071                 ext2fs_clear_feature_metadata_csum(&fs_param);
2072                 ext2fs_clear_feature_ea_inode(&fs_param);
2073                 ext2fs_clear_feature_casefold(&fs_param);
2074         }
2075         edit_feature(fs_features ? fs_features : tmp,
2076                      &fs_param.s_feature_compat);
2077         if (tmp)
2078                 free(tmp);
2079         (void) ext2fs_free_mem(&fs_features);
2080         /*
2081          * If the user specified features incompatible with the Hurd, complain
2082          */
2083         if (for_hurd(creator_os)) {
2084                 if (ext2fs_has_feature_filetype(&fs_param)) {
2085                         fprintf(stderr, "%s", _("The HURD does not support the "
2086                                                 "filetype feature.\n"));
2087                         exit(1);
2088                 }
2089                 if (ext2fs_has_feature_huge_file(&fs_param)) {
2090                         fprintf(stderr, "%s", _("The HURD does not support the "
2091                                                 "huge_file feature.\n"));
2092                         exit(1);
2093                 }
2094                 if (ext2fs_has_feature_metadata_csum(&fs_param)) {
2095                         fprintf(stderr, "%s", _("The HURD does not support the "
2096                                                 "metadata_csum feature.\n"));
2097                         exit(1);
2098                 }
2099                 if (ext2fs_has_feature_ea_inode(&fs_param)) {
2100                         fprintf(stderr, "%s", _("The HURD does not support the "
2101                                                 "ea_inode feature.\n"));
2102                         exit(1);
2103                 }
2104         }
2105
2106         /* Get the hardware sector sizes, if available */
2107         retval = ext2fs_get_device_sectsize(device_name, &lsector_size);
2108         if (retval) {
2109                 com_err(program_name, retval, "%s",
2110                         _("while trying to determine hardware sector size"));
2111                 exit(1);
2112         }
2113         retval = ext2fs_get_device_phys_sectsize(device_name, &psector_size);
2114         if (retval) {
2115                 com_err(program_name, retval, "%s",
2116                         _("while trying to determine physical sector size"));
2117                 exit(1);
2118         }
2119
2120         tmp = getenv("MKE2FS_DEVICE_SECTSIZE");
2121         if (tmp != NULL)
2122                 lsector_size = atoi(tmp);
2123         tmp = getenv("MKE2FS_DEVICE_PHYS_SECTSIZE");
2124         if (tmp != NULL)
2125                 psector_size = atoi(tmp);
2126
2127         /* Older kernels may not have physical/logical distinction */
2128         if (!psector_size)
2129                 psector_size = lsector_size;
2130
2131         if (blocksize <= 0) {
2132                 use_bsize = get_int_from_profile(fs_types, "blocksize", 4096);
2133
2134                 if (use_bsize == -1) {
2135                         use_bsize = sys_page_size;
2136                         if (is_before_linux_ver(2, 6, 0) && use_bsize > 4096)
2137                                 use_bsize = 4096;
2138                 }
2139                 if (lsector_size && use_bsize < lsector_size)
2140                         use_bsize = lsector_size;
2141                 if ((blocksize < 0) && (use_bsize < (-blocksize)))
2142                         use_bsize = -blocksize;
2143                 blocksize = use_bsize;
2144                 fs_blocks_count /= (blocksize / 1024);
2145         } else {
2146                 if (blocksize < lsector_size) {                 /* Impossible */
2147                         com_err(program_name, EINVAL, "%s",
2148                                 _("while setting blocksize; too small "
2149                                   "for device\n"));
2150                         exit(1);
2151                 } else if ((blocksize < psector_size) &&
2152                            (psector_size <= sys_page_size)) {   /* Suboptimal */
2153                         fprintf(stderr, _("Warning: specified blocksize %d is "
2154                                 "less than device physical sectorsize %d\n"),
2155                                 blocksize, psector_size);
2156                 }
2157         }
2158
2159         fs_param.s_log_block_size =
2160                 int_log2(blocksize >> EXT2_MIN_BLOCK_LOG_SIZE);
2161
2162         /*
2163          * We now need to do a sanity check of fs_blocks_count for
2164          * 32-bit vs 64-bit block number support.
2165          */
2166         if ((fs_blocks_count > MAX_32_NUM) &&
2167             ext2fs_has_feature_64bit(&fs_param))
2168                 ext2fs_clear_feature_resize_inode(&fs_param);
2169         if ((fs_blocks_count > MAX_32_NUM) &&
2170             !ext2fs_has_feature_64bit(&fs_param) &&
2171             get_bool_from_profile(fs_types, "auto_64-bit_support", 0)) {
2172                 ext2fs_set_feature_64bit(&fs_param);
2173                 ext2fs_clear_feature_resize_inode(&fs_param);
2174         }
2175         if ((fs_blocks_count > MAX_32_NUM) &&
2176             !ext2fs_has_feature_64bit(&fs_param)) {
2177                 fprintf(stderr, _("%s: Size of device (0x%llx blocks) %s "
2178                                   "too big to be expressed\n\t"
2179                                   "in 32 bits using a blocksize of %d.\n"),
2180                         program_name, fs_blocks_count, device_name,
2181                         EXT2_BLOCK_SIZE(&fs_param));
2182                 exit(1);
2183         }
2184         /*
2185          * Guard against group descriptor count overflowing... Mostly to avoid
2186          * strange results for absurdly large devices.
2187          */
2188         if (fs_blocks_count > ((1ULL << (fs_param.s_log_block_size + 3 + 32)) - 1)) {
2189                 fprintf(stderr, _("%s: Size of device (0x%llx blocks) %s "
2190                                   "too big to create\n\t"
2191                                   "a filesystem using a blocksize of %d.\n"),
2192                         program_name, fs_blocks_count, device_name,
2193                         EXT2_BLOCK_SIZE(&fs_param));
2194                 exit(1);
2195         }
2196
2197         ext2fs_blocks_count_set(&fs_param, fs_blocks_count);
2198
2199         if (ext2fs_has_feature_journal_dev(&fs_param)) {
2200                 int i;
2201
2202                 for (i=0; fs_types[i]; i++) {
2203                         free(fs_types[i]);
2204                         fs_types[i] = 0;
2205                 }
2206                 fs_types[0] = strdup("journal");
2207                 fs_types[1] = 0;
2208         }
2209
2210         if (verbose) {
2211                 fputs(_("fs_types for mke2fs.conf resolution: "), stdout);
2212                 print_str_list(fs_types);
2213         }
2214
2215         if (r_opt == EXT2_GOOD_OLD_REV &&
2216             (fs_param.s_feature_compat || fs_param.s_feature_incompat ||
2217              fs_param.s_feature_ro_compat)) {
2218                 fprintf(stderr, "%s", _("Filesystem features not supported "
2219                                         "with revision 0 filesystems\n"));
2220                 exit(1);
2221         }
2222
2223         if (s_opt > 0) {
2224                 if (r_opt == EXT2_GOOD_OLD_REV) {
2225                         fprintf(stderr, "%s",
2226                                 _("Sparse superblocks not supported "
2227                                   "with revision 0 filesystems\n"));
2228                         exit(1);
2229                 }
2230                 ext2fs_set_feature_sparse_super(&fs_param);
2231         } else if (s_opt == 0)
2232                 ext2fs_clear_feature_sparse_super(&fs_param);
2233
2234         if (journal_size != 0) {
2235                 if (r_opt == EXT2_GOOD_OLD_REV) {
2236                         fprintf(stderr, "%s", _("Journals not supported with "
2237                                                 "revision 0 filesystems\n"));
2238                         exit(1);
2239                 }
2240                 ext2fs_set_feature_journal(&fs_param);
2241         }
2242
2243         /* Get reserved_ratio from profile if not specified on cmd line. */
2244         if (reserved_ratio < 0.0) {
2245                 reserved_ratio = get_double_from_profile(
2246                                         fs_types, "reserved_ratio", 5.0);
2247                 if (reserved_ratio > 50 || reserved_ratio < 0) {
2248                         com_err(program_name, 0,
2249                                 _("invalid reserved blocks percent - %lf"),
2250                                 reserved_ratio);
2251                         exit(1);
2252                 }
2253         }
2254
2255         if (ext2fs_has_feature_journal_dev(&fs_param)) {
2256                 reserved_ratio = 0;
2257                 fs_param.s_feature_incompat = EXT3_FEATURE_INCOMPAT_JOURNAL_DEV;
2258                 fs_param.s_feature_compat = 0;
2259                 fs_param.s_feature_ro_compat &=
2260                                         EXT4_FEATURE_RO_COMPAT_METADATA_CSUM;
2261         }
2262
2263         /* Check the user's mkfs options for 64bit */
2264         if (ext2fs_has_feature_64bit(&fs_param) &&
2265             !ext2fs_has_feature_extents(&fs_param)) {
2266                 printf("%s", _("Extents MUST be enabled for a 64-bit "
2267                                "filesystem.  Pass -O extents to rectify.\n"));
2268                 exit(1);
2269         }
2270
2271         /* Set first meta blockgroup via an environment variable */
2272         /* (this is mostly for debugging purposes) */
2273         if (ext2fs_has_feature_meta_bg(&fs_param) &&
2274             (tmp = getenv("MKE2FS_FIRST_META_BG")))
2275                 fs_param.s_first_meta_bg = atoi(tmp);
2276         if (ext2fs_has_feature_bigalloc(&fs_param)) {
2277                 if (!cluster_size)
2278                         cluster_size = get_int_from_profile(fs_types,
2279                                                             "cluster_size",
2280                                                             blocksize*16);
2281                 fs_param.s_log_cluster_size =
2282                         int_log2(cluster_size >> EXT2_MIN_CLUSTER_LOG_SIZE);
2283                 if (fs_param.s_log_cluster_size &&
2284                     fs_param.s_log_cluster_size < fs_param.s_log_block_size) {
2285                         com_err(program_name, 0, "%s",
2286                                 _("The cluster size may not be "
2287                                   "smaller than the block size.\n"));
2288                         exit(1);
2289                 }
2290         } else if (cluster_size) {
2291                 com_err(program_name, 0, "%s",
2292                         _("specifying a cluster size requires the "
2293                           "bigalloc feature"));
2294                 exit(1);
2295         } else
2296                 fs_param.s_log_cluster_size = fs_param.s_log_block_size;
2297
2298         if (inode_ratio == 0) {
2299                 inode_ratio = get_int_from_profile(fs_types, "inode_ratio",
2300                                                    8192);
2301                 if (inode_ratio < blocksize)
2302                         inode_ratio = blocksize;
2303                 if (inode_ratio < EXT2_CLUSTER_SIZE(&fs_param))
2304                         inode_ratio = EXT2_CLUSTER_SIZE(&fs_param);
2305         }
2306
2307 #ifdef HAVE_BLKID_PROBE_GET_TOPOLOGY
2308         retval = get_device_geometry(device_name, &fs_param,
2309                                      (unsigned int) psector_size);
2310         if (retval < 0) {
2311                 fprintf(stderr,
2312                         _("warning: Unable to get device geometry for %s\n"),
2313                         device_name);
2314         } else if (retval) {
2315                 printf(_("%s alignment is offset by %lu bytes.\n"),
2316                        device_name, retval);
2317                 printf(_("This may result in very poor performance, "
2318                           "(re)-partitioning suggested.\n"));
2319         }
2320 #endif
2321
2322         num_backups = get_int_from_profile(fs_types, "num_backup_sb", 2);
2323
2324         blocksize = EXT2_BLOCK_SIZE(&fs_param);
2325
2326         /*
2327          * Initialize s_desc_size so that the parse_extended_opts()
2328          * can correctly handle "-E resize=NNN" if the 64-bit option
2329          * is set.
2330          */
2331         if (ext2fs_has_feature_64bit(&fs_param))
2332                 fs_param.s_desc_size = EXT2_MIN_DESC_SIZE_64BIT;
2333
2334         /* This check should happen beyond the last assignment to blocksize */
2335         if (blocksize > sys_page_size) {
2336                 if (!force) {
2337                         com_err(program_name, 0,
2338                                 _("%d-byte blocks too big for system (max %d)"),
2339                                 blocksize, sys_page_size);
2340                         proceed_question(proceed_delay);
2341                 }
2342                 fprintf(stderr, _("Warning: %d-byte blocks too big for system "
2343                                   "(max %d), forced to continue\n"),
2344                         blocksize, sys_page_size);
2345         }
2346
2347         /* Metadata checksumming wasn't totally stable before 3.18. */
2348         if (is_before_linux_ver(3, 18, 0) &&
2349             ext2fs_has_feature_metadata_csum(&fs_param))
2350                 fprintf(stderr, _("Suggestion: Use Linux kernel >= 3.18 for "
2351                         "improved stability of the metadata and journal "
2352                         "checksum features.\n"));
2353
2354         /*
2355          * On newer kernels we do have lazy_itable_init support. So pick the
2356          * right default in case ext4 module is not loaded.
2357          */
2358         if (is_before_linux_ver(2, 6, 37))
2359                 lazy_itable_init = 0;
2360         else
2361                 lazy_itable_init = 1;
2362
2363         if (access("/sys/fs/ext4/features/lazy_itable_init", R_OK) == 0)
2364                 lazy_itable_init = 1;
2365
2366         lazy_itable_init = get_bool_from_profile(fs_types,
2367                                                  "lazy_itable_init",
2368                                                  lazy_itable_init);
2369         discard = get_bool_from_profile(fs_types, "discard" , discard);
2370         journal_flags |= get_bool_from_profile(fs_types,
2371                                                "lazy_journal_init", 0) ?
2372                                                EXT2_MKJOURNAL_LAZYINIT : 0;
2373         journal_flags |= EXT2_MKJOURNAL_NO_MNT_CHECK;
2374
2375         if (!journal_location_string)
2376                 journal_location_string = get_string_from_profile(fs_types,
2377                                                 "journal_location", "");
2378         if ((journal_location == ~0ULL) && journal_location_string &&
2379             *journal_location_string)
2380                 journal_location = parse_num_blocks2(journal_location_string,
2381                                                 fs_param.s_log_block_size);
2382         free(journal_location_string);
2383
2384         packed_meta_blocks = get_bool_from_profile(fs_types,
2385                                                    "packed_meta_blocks", 0);
2386         if (packed_meta_blocks)
2387                 journal_location = 0;
2388
2389         if (ext2fs_has_feature_casefold(&fs_param)) {
2390                 char *ef, *en = get_string_from_profile(fs_types,
2391                                                         "encoding", "utf8");
2392                 int encoding = e2p_str2encoding(en);
2393
2394                 if (encoding < 0) {
2395                         com_err(program_name, 0,
2396                                 _("Unknown filename encoding from profile: %s"),
2397                                 en);
2398                         exit(1);
2399                 }
2400                 fs_param.s_encoding = encoding;
2401                 ef = get_string_from_profile(fs_types, "encoding_flags", NULL);
2402                 if (ef) {
2403                         if (e2p_str2encoding_flags(encoding, ef,
2404                                         &fs_param.s_encoding_flags) < 0) {
2405                                 com_err(program_name, 0,
2406                         _("Unknown encoding flags from profile: %s"), ef);
2407                                 exit(1);
2408                         }
2409                 } else
2410                         fs_param.s_encoding_flags =
2411                                 e2p_get_encoding_flags(encoding);
2412         }
2413
2414         /* Get options from profile */
2415         for (cpp = fs_types; *cpp; cpp++) {
2416                 tmp = NULL;
2417                 profile_get_string(profile, "fs_types", *cpp, "options", "", &tmp);
2418                         if (tmp && *tmp)
2419                                 parse_extended_opts(&fs_param, tmp);
2420                         free(tmp);
2421         }
2422
2423         if (extended_opts)
2424                 parse_extended_opts(&fs_param, extended_opts);
2425
2426         if (explicit_fssize == 0 && offset > 0) {
2427                 fs_blocks_count -= offset / EXT2_BLOCK_SIZE(&fs_param);
2428                 ext2fs_blocks_count_set(&fs_param, fs_blocks_count);
2429                 fprintf(stderr,
2430                         _("\nWarning: offset specified without an "
2431                           "explicit file system size.\n"
2432                           "Creating a file system with %llu blocks "
2433                           "but this might\n"
2434                           "not be what you want.\n\n"),
2435                         (unsigned long long) fs_blocks_count);
2436         }
2437
2438         if (quotatype_bits & QUOTA_PRJ_BIT)
2439                 ext2fs_set_feature_project(&fs_param);
2440
2441         if (ext2fs_has_feature_project(&fs_param)) {
2442                 quotatype_bits |= QUOTA_PRJ_BIT;
2443                 if (inode_size == EXT2_GOOD_OLD_INODE_SIZE) {
2444                         com_err(program_name, 0,
2445                                 _("%d byte inodes are too small for "
2446                                   "project quota"),
2447                                 inode_size);
2448                         exit(1);
2449                 }
2450                 if (inode_size == 0) {
2451                         inode_size = get_int_from_profile(fs_types,
2452                                                           "inode_size", 0);
2453                         if (inode_size <= EXT2_GOOD_OLD_INODE_SIZE*2)
2454                                 inode_size = EXT2_GOOD_OLD_INODE_SIZE*2;
2455                 }
2456         }
2457
2458         if (ext2fs_has_feature_casefold(&fs_param) &&
2459             ext2fs_has_feature_encrypt(&fs_param)) {
2460                 com_err(program_name, 0, "%s",
2461                         _("The encrypt and casefold features are not "
2462                           "compatible.\nThey can not be both enabled "
2463                           "simultaneously.\n"));
2464                       exit (1);
2465         }
2466
2467         /* Don't allow user to set both metadata_csum and uninit_bg bits. */
2468         if (ext2fs_has_feature_metadata_csum(&fs_param) &&
2469             ext2fs_has_feature_gdt_csum(&fs_param))
2470                 ext2fs_clear_feature_gdt_csum(&fs_param);
2471
2472         /* Can't support bigalloc feature without extents feature */
2473         if (ext2fs_has_feature_bigalloc(&fs_param) &&
2474             !ext2fs_has_feature_extents(&fs_param)) {
2475                 com_err(program_name, 0, "%s",
2476                         _("Can't support bigalloc feature without "
2477                           "extents feature"));
2478                 exit(1);
2479         }
2480
2481         if (ext2fs_has_feature_meta_bg(&fs_param) &&
2482             ext2fs_has_feature_resize_inode(&fs_param)) {
2483                 fprintf(stderr, "%s", _("The resize_inode and meta_bg "
2484                                         "features are not compatible.\n"
2485                                         "They can not be both enabled "
2486                                         "simultaneously.\n"));
2487                 exit(1);
2488         }
2489
2490         if (!quiet && ext2fs_has_feature_bigalloc(&fs_param))
2491                 fprintf(stderr, "%s", _("\nWarning: the bigalloc feature is "
2492                                   "still under development\n"
2493                                   "See https://ext4.wiki.kernel.org/"
2494                                   "index.php/Bigalloc for more information\n\n"));
2495
2496         /*
2497          * Since sparse_super is the default, we would only have a problem
2498          * here if it was explicitly disabled.
2499          */
2500         if (ext2fs_has_feature_resize_inode(&fs_param) &&
2501             !ext2fs_has_feature_sparse_super(&fs_param)) {
2502                 com_err(program_name, 0, "%s",
2503                         _("reserved online resize blocks not supported "
2504                           "on non-sparse filesystem"));
2505                 exit(1);
2506         }
2507
2508         if (fs_param.s_blocks_per_group) {
2509                 if (fs_param.s_blocks_per_group < 256 ||
2510                     fs_param.s_blocks_per_group > 8 * (unsigned) blocksize) {
2511                         com_err(program_name, 0, "%s",
2512                                 _("blocks per group count out of range"));
2513                         exit(1);
2514                 }
2515         }
2516
2517         /*
2518          * If the bigalloc feature is enabled, then the -g option will
2519          * specify the number of clusters per group.
2520          */
2521         if (ext2fs_has_feature_bigalloc(&fs_param)) {
2522                 fs_param.s_clusters_per_group = fs_param.s_blocks_per_group;
2523                 fs_param.s_blocks_per_group = 0;
2524         }
2525
2526         if (inode_size == 0)
2527                 inode_size = get_int_from_profile(fs_types, "inode_size", 0);
2528         if (!flex_bg_size && ext2fs_has_feature_flex_bg(&fs_param))
2529                 flex_bg_size = get_uint_from_profile(fs_types,
2530                                                      "flex_bg_size", 16);
2531         if (flex_bg_size) {
2532                 if (!ext2fs_has_feature_flex_bg(&fs_param)) {
2533                         com_err(program_name, 0, "%s",
2534                                 _("Flex_bg feature not enabled, so "
2535                                   "flex_bg size may not be specified"));
2536                         exit(1);
2537                 }
2538                 fs_param.s_log_groups_per_flex = int_log2(flex_bg_size);
2539         }
2540
2541         if (inode_size && fs_param.s_rev_level >= EXT2_DYNAMIC_REV) {
2542                 if (inode_size < EXT2_GOOD_OLD_INODE_SIZE ||
2543                     inode_size > EXT2_BLOCK_SIZE(&fs_param) ||
2544                     inode_size & (inode_size - 1)) {
2545                         com_err(program_name, 0,
2546                                 _("invalid inode size %d (min %d/max %d)"),
2547                                 inode_size, EXT2_GOOD_OLD_INODE_SIZE,
2548                                 blocksize);
2549                         exit(1);
2550                 }
2551                 fs_param.s_inode_size = inode_size;
2552         }
2553
2554         /*
2555          * If inode size is 128 and inline data is enabled, we need
2556          * to notify users that inline data will never be useful.
2557          */
2558         if (ext2fs_has_feature_inline_data(&fs_param) &&
2559             fs_param.s_inode_size == EXT2_GOOD_OLD_INODE_SIZE) {
2560                 com_err(program_name, 0,
2561                         _("%d byte inodes are too small for inline data; "
2562                           "specify larger size"),
2563                         fs_param.s_inode_size);
2564                 exit(1);
2565         }
2566
2567         /* Make sure number of inodes specified will fit in 32 bits */
2568         if (num_inodes == 0) {
2569                 unsigned long long n;
2570                 n = ext2fs_blocks_count(&fs_param) * blocksize / inode_ratio;
2571                 if (n > MAX_32_NUM) {
2572                         if (ext2fs_has_feature_64bit(&fs_param))
2573                                 num_inodes = MAX_32_NUM;
2574                         else {
2575                                 com_err(program_name, 0,
2576                                         _("too many inodes (%llu), raise "
2577                                           "inode ratio?"), n);
2578                                 exit(1);
2579                         }
2580                 }
2581         } else if (num_inodes > MAX_32_NUM) {
2582                 com_err(program_name, 0,
2583                         _("too many inodes (%llu), specify < 2^32 inodes"),
2584                           num_inodes);
2585                 exit(1);
2586         }
2587         /*
2588          * Calculate number of inodes based on the inode ratio
2589          */
2590         fs_param.s_inodes_count = num_inodes ? num_inodes :
2591                 (ext2fs_blocks_count(&fs_param) * blocksize) / inode_ratio;
2592
2593         if ((((unsigned long long)fs_param.s_inodes_count) *
2594              (inode_size ? inode_size : EXT2_GOOD_OLD_INODE_SIZE)) >=
2595             ((ext2fs_blocks_count(&fs_param)) *
2596              EXT2_BLOCK_SIZE(&fs_param))) {
2597                 com_err(program_name, 0, _("inode_size (%u) * inodes_count "
2598                                           "(%u) too big for a\n\t"
2599                                           "filesystem with %llu blocks, "
2600                                           "specify higher inode_ratio (-i)\n\t"
2601                                           "or lower inode count (-N).\n"),
2602                         inode_size ? inode_size : EXT2_GOOD_OLD_INODE_SIZE,
2603                         fs_param.s_inodes_count,
2604                         (unsigned long long) ext2fs_blocks_count(&fs_param));
2605                 exit(1);
2606         }
2607
2608         /*
2609          * Calculate number of blocks to reserve
2610          */
2611         ext2fs_r_blocks_count_set(&fs_param, reserved_ratio *
2612                                   ext2fs_blocks_count(&fs_param) / 100.0);
2613
2614         if (ext2fs_has_feature_sparse_super2(&fs_param)) {
2615                 if (num_backups >= 1)
2616                         fs_param.s_backup_bgs[0] = 1;
2617                 if (num_backups >= 2)
2618                         fs_param.s_backup_bgs[1] = ~0;
2619         }
2620
2621         free(fs_type);
2622         free(usage_types);
2623 }
2624
2625 static int should_do_undo(const char *name)
2626 {
2627         errcode_t retval;
2628         io_channel channel;
2629         __u16   s_magic;
2630         struct ext2_super_block super;
2631         io_manager manager = unix_io_manager;
2632         int csum_flag, force_undo;
2633
2634         csum_flag = ext2fs_has_feature_metadata_csum(&fs_param) ||
2635                     ext2fs_has_feature_gdt_csum(&fs_param);
2636         force_undo = get_int_from_profile(fs_types, "force_undo", 0);
2637         if (!force_undo && (!csum_flag || !lazy_itable_init))
2638                 return 0;
2639
2640         retval = manager->open(name, IO_FLAG_EXCLUSIVE,  &channel);
2641         if (retval) {
2642                 /*
2643                  * We don't handle error cases instead we
2644                  * declare that the file system doesn't exist
2645                  * and let the rest of mke2fs take care of
2646                  * error
2647                  */
2648                 retval = 0;
2649                 goto open_err_out;
2650         }
2651
2652         io_channel_set_blksize(channel, SUPERBLOCK_OFFSET);
2653         retval = io_channel_read_blk64(channel, 1, -SUPERBLOCK_SIZE, &super);
2654         if (retval) {
2655                 retval = 0;
2656                 goto err_out;
2657         }
2658
2659 #if defined(WORDS_BIGENDIAN)
2660         s_magic = ext2fs_swab16(super.s_magic);
2661 #else
2662         s_magic = super.s_magic;
2663 #endif
2664
2665         if (s_magic == EXT2_SUPER_MAGIC)
2666                 retval = 1;
2667
2668 err_out:
2669         io_channel_close(channel);
2670
2671 open_err_out:
2672
2673         return retval;
2674 }
2675
2676 static int mke2fs_setup_tdb(const char *name, io_manager *io_ptr)
2677 {
2678         errcode_t retval = ENOMEM;
2679         char *tdb_dir = NULL, *tdb_file = NULL;
2680         char *dev_name, *tmp_name;
2681         int free_tdb_dir = 0;
2682
2683         /* (re)open a specific undo file */
2684         if (undo_file && undo_file[0] != 0) {
2685                 retval = set_undo_io_backing_manager(*io_ptr);
2686                 if (retval)
2687                         goto err;
2688                 *io_ptr = undo_io_manager;
2689                 retval = set_undo_io_backup_file(undo_file);
2690                 if (retval)
2691                         goto err;
2692                 printf(_("Overwriting existing filesystem; this can be undone "
2693                          "using the command:\n"
2694                          "    e2undo %s %s\n\n"), undo_file, name);
2695                 return retval;
2696         }
2697
2698         /*
2699          * Configuration via a conf file would be
2700          * nice
2701          */
2702         tdb_dir = getenv("E2FSPROGS_UNDO_DIR");
2703         if (!tdb_dir) {
2704                 profile_get_string(profile, "defaults",
2705                                    "undo_dir", 0, "/var/lib/e2fsprogs",
2706                                    &tdb_dir);
2707                 free_tdb_dir = 1;
2708         }
2709
2710         if (!strcmp(tdb_dir, "none") || (tdb_dir[0] == 0) ||
2711             access(tdb_dir, W_OK)) {
2712                 if (free_tdb_dir)
2713                         free(tdb_dir);
2714                 return 0;
2715         }
2716
2717         tmp_name = strdup(name);
2718         if (!tmp_name)
2719                 goto errout;
2720         dev_name = basename(tmp_name);
2721         tdb_file = malloc(strlen(tdb_dir) + 8 + strlen(dev_name) + 7 + 1);
2722         if (!tdb_file) {
2723                 free(tmp_name);
2724                 goto errout;
2725         }
2726         sprintf(tdb_file, "%s/mke2fs-%s.e2undo", tdb_dir, dev_name);
2727         free(tmp_name);
2728
2729         if ((unlink(tdb_file) < 0) && (errno != ENOENT)) {
2730                 retval = errno;
2731                 com_err(program_name, retval,
2732                         _("while trying to delete %s"), tdb_file);
2733                 goto errout;
2734         }
2735
2736         retval = set_undo_io_backing_manager(*io_ptr);
2737         if (retval)
2738                 goto errout;
2739         *io_ptr = undo_io_manager;
2740         retval = set_undo_io_backup_file(tdb_file);
2741         if (retval)
2742                 goto errout;
2743         printf(_("Overwriting existing filesystem; this can be undone "
2744                  "using the command:\n"
2745                  "    e2undo %s %s\n\n"), tdb_file, name);
2746
2747         if (free_tdb_dir)
2748                 free(tdb_dir);
2749         free(tdb_file);
2750         return 0;
2751
2752 errout:
2753         if (free_tdb_dir)
2754                 free(tdb_dir);
2755         free(tdb_file);
2756 err:
2757         com_err(program_name, retval, "%s",
2758                 _("while trying to setup undo file\n"));
2759         return retval;
2760 }
2761
2762 static int mke2fs_discard_device(ext2_filsys fs)
2763 {
2764         struct ext2fs_numeric_progress_struct progress;
2765         blk64_t blocks = ext2fs_blocks_count(fs->super);
2766         blk64_t count = DISCARD_STEP_MB;
2767         blk64_t cur;
2768         int retval = 0;
2769
2770         /*
2771          * Let's try if discard really works on the device, so
2772          * we do not print numeric progress resulting in failure
2773          * afterwards.
2774          */
2775         retval = io_channel_discard(fs->io, 0, fs->blocksize);
2776         if (retval)
2777                 return retval;
2778         cur = fs->blocksize;
2779
2780         count *= (1024 * 1024);
2781         count /= fs->blocksize;
2782
2783         ext2fs_numeric_progress_init(fs, &progress,
2784                                      _("Discarding device blocks: "),
2785                                      blocks);
2786         while (cur < blocks) {
2787                 ext2fs_numeric_progress_update(fs, &progress, cur);
2788
2789                 if (cur + count > blocks)
2790                         count = blocks - cur;
2791
2792                 retval = io_channel_discard(fs->io, cur, count);
2793                 if (retval)
2794                         break;
2795                 cur += count;
2796         }
2797
2798         if (retval) {
2799                 ext2fs_numeric_progress_close(fs, &progress,
2800                                       _("failed - "));
2801                 if (!quiet)
2802                         printf("%s\n",error_message(retval));
2803         } else
2804                 ext2fs_numeric_progress_close(fs, &progress,
2805                                       _("done                            \n"));
2806
2807         return retval;
2808 }
2809
2810 static void fix_cluster_bg_counts(ext2_filsys fs)
2811 {
2812         blk64_t         block, num_blocks, last_block, next;
2813         blk64_t         tot_free = 0;
2814         errcode_t       retval;
2815         dgrp_t          group = 0;
2816         int             grp_free = 0;
2817
2818         num_blocks = ext2fs_blocks_count(fs->super);
2819         last_block = ext2fs_group_last_block2(fs, group);
2820         block = fs->super->s_first_data_block;
2821         while (block < num_blocks) {
2822                 retval = ext2fs_find_first_zero_block_bitmap2(fs->block_map,
2823                                                 block, last_block, &next);
2824                 if (retval == 0)
2825                         block = next;
2826                 else {
2827                         block = last_block + 1;
2828                         goto next_bg;
2829                 }
2830
2831                 retval = ext2fs_find_first_set_block_bitmap2(fs->block_map,
2832                                                 block, last_block, &next);
2833                 if (retval)
2834                         next = last_block + 1;
2835                 grp_free += EXT2FS_NUM_B2C(fs, next - block);
2836                 tot_free += next - block;
2837                 block = next;
2838
2839                 if (block > last_block) {
2840                 next_bg:
2841                         ext2fs_bg_free_blocks_count_set(fs, group, grp_free);
2842                         ext2fs_group_desc_csum_set(fs, group);
2843                         grp_free = 0;
2844                         group++;
2845                         last_block = ext2fs_group_last_block2(fs, group);
2846                 }
2847         }
2848         ext2fs_free_blocks_count_set(fs->super, tot_free);
2849 }
2850
2851 static int create_quota_inodes(ext2_filsys fs)
2852 {
2853         quota_ctx_t qctx;
2854         errcode_t retval;
2855
2856         retval = quota_init_context(&qctx, fs, quotatype_bits);
2857         if (retval) {
2858                 com_err(program_name, retval,
2859                         _("while initializing quota context"));
2860                 exit(1);
2861         }
2862         quota_compute_usage(qctx);
2863         retval = quota_write_inode(qctx, quotatype_bits);
2864         if (retval) {
2865                 com_err(program_name, retval,
2866                         _("while writing quota inodes"));
2867                 exit(1);
2868         }
2869         quota_release_context(&qctx);
2870
2871         return 0;
2872 }
2873
2874 static errcode_t set_error_behavior(ext2_filsys fs)
2875 {
2876         char    *arg = NULL;
2877         short   errors = fs->super->s_errors;
2878
2879         arg = get_string_from_profile(fs_types, "errors", NULL);
2880         if (arg == NULL)
2881                 goto try_user;
2882
2883         if (strcmp(arg, "continue") == 0)
2884                 errors = EXT2_ERRORS_CONTINUE;
2885         else if (strcmp(arg, "remount-ro") == 0)
2886                 errors = EXT2_ERRORS_RO;
2887         else if (strcmp(arg, "panic") == 0)
2888                 errors = EXT2_ERRORS_PANIC;
2889         else {
2890                 com_err(program_name, 0,
2891                         _("bad error behavior in profile - %s"),
2892                         arg);
2893                 free(arg);
2894                 return EXT2_ET_INVALID_ARGUMENT;
2895         }
2896         free(arg);
2897
2898 try_user:
2899         if (errors_behavior)
2900                 errors = errors_behavior;
2901
2902         fs->super->s_errors = errors;
2903         return 0;
2904 }
2905
2906 int main (int argc, char *argv[])
2907 {
2908         errcode_t       retval = 0;
2909         ext2_filsys     fs;
2910         badblocks_list  bb_list = 0;
2911         unsigned int    journal_blocks = 0;
2912         unsigned int    i, checkinterval;
2913         int             max_mnt_count;
2914         int             val, hash_alg;
2915         int             flags;
2916         int             old_bitmaps;
2917         io_manager      io_ptr;
2918         char            opt_string[40];
2919         char            *hash_alg_str;
2920         int             itable_zeroed = 0;
2921
2922 #ifdef ENABLE_NLS
2923         setlocale(LC_MESSAGES, "");
2924         setlocale(LC_CTYPE, "");
2925         bindtextdomain(NLS_CAT_NAME, LOCALEDIR);
2926         textdomain(NLS_CAT_NAME);
2927         set_com_err_gettext(gettext);
2928 #endif
2929         PRS(argc, argv);
2930
2931 #ifdef CONFIG_TESTIO_DEBUG
2932         if (getenv("TEST_IO_FLAGS") || getenv("TEST_IO_BLOCK")) {
2933                 io_ptr = test_io_manager;
2934                 test_io_backing_manager = unix_io_manager;
2935         } else
2936 #endif
2937                 io_ptr = unix_io_manager;
2938
2939         if (undo_file != NULL || should_do_undo(device_name)) {
2940                 retval = mke2fs_setup_tdb(device_name, &io_ptr);
2941                 if (retval)
2942                         exit(1);
2943         }
2944
2945         /*
2946          * Initialize the superblock....
2947          */
2948         flags = EXT2_FLAG_EXCLUSIVE;
2949         if (direct_io)
2950                 flags |= EXT2_FLAG_DIRECT_IO;
2951         profile_get_boolean(profile, "options", "old_bitmaps", 0, 0,
2952                             &old_bitmaps);
2953         if (!old_bitmaps)
2954                 flags |= EXT2_FLAG_64BITS;
2955         /*
2956          * By default, we print how many inode tables or block groups
2957          * or whatever we've written so far.  The quiet flag disables
2958          * this, along with a lot of other output.
2959          */
2960         if (!quiet)
2961                 flags |= EXT2_FLAG_PRINT_PROGRESS;
2962         if (android_sparse_file) {
2963                 char *android_sparse_params = malloc(strlen(device_name) + 48);
2964
2965                 if (!android_sparse_params) {
2966                         com_err(program_name, ENOMEM, "%s",
2967                                 _("in malloc for android_sparse_params"));
2968                         exit(1);
2969                 }
2970                 sprintf(android_sparse_params, "(%s):%u:%u",
2971                          device_name, fs_param.s_blocks_count,
2972                          1024 << fs_param.s_log_block_size);
2973                 retval = ext2fs_initialize(android_sparse_params, flags,
2974                                            &fs_param, sparse_io_manager, &fs);
2975                 free(android_sparse_params);
2976         } else
2977                 retval = ext2fs_initialize(device_name, flags, &fs_param,
2978                                            io_ptr, &fs);
2979         if (retval) {
2980                 com_err(device_name, retval, "%s",
2981                         _("while setting up superblock"));
2982                 exit(1);
2983         }
2984         fs->progress_ops = &ext2fs_numeric_progress_ops;
2985
2986         /* Set the error behavior */
2987         retval = set_error_behavior(fs);
2988         if (retval)
2989                 usage();
2990
2991         /* Check the user's mkfs options for metadata checksumming */
2992         if (!quiet &&
2993             !ext2fs_has_feature_journal_dev(fs->super) &&
2994             ext2fs_has_feature_metadata_csum(fs->super)) {
2995                 if (!ext2fs_has_feature_extents(fs->super))
2996                         printf("%s",
2997                                _("Extents are not enabled.  The file extent "
2998                                  "tree can be checksummed, whereas block maps "
2999                                  "cannot.  Not enabling extents reduces the "
3000                                  "coverage of metadata checksumming.  "
3001                                  "Pass -O extents to rectify.\n"));
3002                 if (!ext2fs_has_feature_64bit(fs->super))
3003                         printf("%s",
3004                                _("64-bit filesystem support is not enabled.  "
3005                                  "The larger fields afforded by this feature "
3006                                  "enable full-strength checksumming.  "
3007                                  "Pass -O 64bit to rectify.\n"));
3008         }
3009
3010         if (ext2fs_has_feature_csum_seed(fs->super) &&
3011             !ext2fs_has_feature_metadata_csum(fs->super)) {
3012                 printf("%s", _("The metadata_csum_seed feature "
3013                                "requires the metadata_csum feature.\n"));
3014                 exit(1);
3015         }
3016
3017         /* Calculate journal blocks */
3018         if (!journal_device && ((journal_size) ||
3019             ext2fs_has_feature_journal(&fs_param)))
3020                 journal_blocks = figure_journal_size(journal_size, fs);
3021
3022         sprintf(opt_string, "tdb_data_size=%d", fs->blocksize <= 4096 ?
3023                 32768 : fs->blocksize * 8);
3024         io_channel_set_options(fs->io, opt_string);
3025         if (offset) {
3026                 sprintf(opt_string, "offset=%llu", offset);
3027                 io_channel_set_options(fs->io, opt_string);
3028         }
3029
3030         /* Can't undo discard ... */
3031         if (!noaction && discard && dev_size && (io_ptr != undo_io_manager)) {
3032                 retval = mke2fs_discard_device(fs);
3033                 if (!retval && io_channel_discard_zeroes_data(fs->io)) {
3034                         if (verbose)
3035                                 printf("%s",
3036                                        _("Discard succeeded and will return "
3037                                          "0s - skipping inode table wipe\n"));
3038                         lazy_itable_init = 1;
3039                         itable_zeroed = 1;
3040                         zero_hugefile = 0;
3041                 }
3042         }
3043
3044         if (fs_param.s_flags & EXT2_FLAGS_TEST_FILESYS)
3045                 fs->super->s_flags |= EXT2_FLAGS_TEST_FILESYS;
3046
3047         if (ext2fs_has_feature_flex_bg(&fs_param) ||
3048             ext2fs_has_feature_huge_file(&fs_param) ||
3049             ext2fs_has_feature_gdt_csum(&fs_param) ||
3050             ext2fs_has_feature_dir_nlink(&fs_param) ||
3051             ext2fs_has_feature_metadata_csum(&fs_param) ||
3052             ext2fs_has_feature_extra_isize(&fs_param))
3053                 fs->super->s_kbytes_written = 1;
3054
3055         /*
3056          * Wipe out the old on-disk superblock
3057          */
3058         if (!noaction)
3059                 zap_sector(fs, 2, 6);
3060
3061         /*
3062          * Parse or generate a UUID for the filesystem
3063          */
3064         if (fs_uuid) {
3065                 if ((strcasecmp(fs_uuid, "null") == 0) ||
3066                     (strcasecmp(fs_uuid, "clear") == 0)) {
3067                         uuid_clear(fs->super->s_uuid);
3068                 } else if (strcasecmp(fs_uuid, "time") == 0) {
3069                         uuid_generate_time(fs->super->s_uuid);
3070                 } else if (strcasecmp(fs_uuid, "random") == 0) {
3071                         uuid_generate(fs->super->s_uuid);
3072                 } else if (uuid_parse(fs_uuid, fs->super->s_uuid) != 0) {
3073                         com_err(device_name, 0, "could not parse UUID: %s\n",
3074                                 fs_uuid);
3075                         exit(1);
3076                 }
3077         } else
3078                 uuid_generate(fs->super->s_uuid);
3079
3080         if (ext2fs_has_feature_csum_seed(fs->super))
3081                 fs->super->s_checksum_seed = ext2fs_crc32c_le(~0,
3082                                 fs->super->s_uuid, sizeof(fs->super->s_uuid));
3083
3084         ext2fs_init_csum_seed(fs);
3085
3086         /*
3087          * Initialize the directory index variables
3088          */
3089         hash_alg_str = get_string_from_profile(fs_types, "hash_alg",
3090                                                "half_md4");
3091         hash_alg = e2p_string2hash(hash_alg_str);
3092         free(hash_alg_str);
3093         fs->super->s_def_hash_version = (hash_alg >= 0) ? hash_alg :
3094                 EXT2_HASH_HALF_MD4;
3095
3096         if (memcmp(fs_param.s_hash_seed, zero_buf,
3097                 sizeof(fs_param.s_hash_seed)) != 0) {
3098                 memcpy(fs->super->s_hash_seed, fs_param.s_hash_seed,
3099                         sizeof(fs->super->s_hash_seed));
3100         } else
3101                 uuid_generate((unsigned char *) fs->super->s_hash_seed);
3102
3103         /*
3104          * Periodic checks can be enabled/disabled via config file.
3105          * Note we override the kernel include file's idea of what the default
3106          * check interval (never) should be.  It's a good idea to check at
3107          * least *occasionally*, specially since servers will never rarely get
3108          * to reboot, since Linux is so robust these days.  :-)
3109          *
3110          * 180 days (six months) seems like a good value.
3111          */
3112 #ifdef EXT2_DFL_CHECKINTERVAL
3113 #undef EXT2_DFL_CHECKINTERVAL
3114 #endif
3115 #define EXT2_DFL_CHECKINTERVAL (86400L * 180L)
3116
3117         if (get_bool_from_profile(fs_types, "enable_periodic_fsck", 0)) {
3118                 fs->super->s_checkinterval = EXT2_DFL_CHECKINTERVAL;
3119                 fs->super->s_max_mnt_count = EXT2_DFL_MAX_MNT_COUNT;
3120                 /*
3121                  * Add "jitter" to the superblock's check interval so that we
3122                  * don't check all the filesystems at the same time.  We use a
3123                  * kludgy hack of using the UUID to derive a random jitter value
3124                  */
3125                 for (i = 0, val = 0 ; i < sizeof(fs->super->s_uuid); i++)
3126                         val += fs->super->s_uuid[i];
3127                 fs->super->s_max_mnt_count += val % EXT2_DFL_MAX_MNT_COUNT;
3128         } else
3129                 fs->super->s_max_mnt_count = -1;
3130
3131         /*
3132          * Override the creator OS, if applicable
3133          */
3134         if (creator_os && !set_os(fs->super, creator_os)) {
3135                 com_err (program_name, 0, _("unknown os - %s"), creator_os);
3136                 exit(1);
3137         }
3138
3139         /*
3140          * For the Hurd, we will turn off filetype since it doesn't
3141          * support it.
3142          */
3143         if (fs->super->s_creator_os == EXT2_OS_HURD)
3144                 ext2fs_clear_feature_filetype(fs->super);
3145
3146         /*
3147          * Set the volume label...
3148          */
3149         if (volume_label) {
3150                 memset(fs->super->s_volume_name, 0,
3151                        sizeof(fs->super->s_volume_name));
3152                 strncpy(fs->super->s_volume_name, volume_label,
3153                         sizeof(fs->super->s_volume_name));
3154         }
3155
3156         /*
3157          * Set the last mount directory
3158          */
3159         if (mount_dir) {
3160                 memset(fs->super->s_last_mounted, 0,
3161                        sizeof(fs->super->s_last_mounted));
3162                 strncpy(fs->super->s_last_mounted, mount_dir,
3163                         sizeof(fs->super->s_last_mounted));
3164         }
3165
3166         /* Set current default encryption algorithms for data and
3167          * filename encryption */
3168         if (ext2fs_has_feature_encrypt(fs->super)) {
3169                 fs->super->s_encrypt_algos[0] =
3170                         EXT4_ENCRYPTION_MODE_AES_256_XTS;
3171                 fs->super->s_encrypt_algos[1] =
3172                         EXT4_ENCRYPTION_MODE_AES_256_CTS;
3173         }
3174
3175         if (ext2fs_has_feature_metadata_csum(fs->super))
3176                 fs->super->s_checksum_type = EXT2_CRC32C_CHKSUM;
3177
3178         if (!quiet || noaction)
3179                 show_stats(fs);
3180
3181         if (noaction)
3182                 exit(0);
3183
3184         if (ext2fs_has_feature_journal_dev(fs->super)) {
3185                 create_journal_dev(fs);
3186                 printf("\n");
3187                 exit(ext2fs_close_free(&fs) ? 1 : 0);
3188         }
3189
3190         if (bad_blocks_filename)
3191                 read_bb_file(fs, &bb_list, bad_blocks_filename);
3192         if (cflag)
3193                 test_disk(fs, &bb_list);
3194         handle_bad_blocks(fs, bb_list);
3195
3196         fs->stride = fs_stride = fs->super->s_raid_stride;
3197         if (!quiet)
3198                 printf("%s", _("Allocating group tables: "));
3199         if (ext2fs_has_feature_flex_bg(fs->super) &&
3200             packed_meta_blocks)
3201                 retval = packed_allocate_tables(fs);
3202         else
3203                 retval = ext2fs_allocate_tables(fs);
3204         if (retval) {
3205                 com_err(program_name, retval, "%s",
3206                         _("while trying to allocate filesystem tables"));
3207                 exit(1);
3208         }
3209         if (!quiet)
3210                 printf("%s", _("done                            \n"));
3211
3212         retval = ext2fs_convert_subcluster_bitmap(fs, &fs->block_map);
3213         if (retval) {
3214                 com_err(program_name, retval, "%s",
3215                         _("\n\twhile converting subcluster bitmap"));
3216                 exit(1);
3217         }
3218
3219         if (super_only) {
3220                 check_plausibility(device_name, CHECK_FS_EXIST, NULL);
3221                 printf(_("%s may be further corrupted by superblock rewrite\n"),
3222                        device_name);
3223                 if (!force)
3224                         proceed_question(proceed_delay);
3225                 fs->super->s_state |= EXT2_ERROR_FS;
3226                 fs->flags &= ~(EXT2_FLAG_IB_DIRTY|EXT2_FLAG_BB_DIRTY);
3227                 /*
3228                  * The command "mke2fs -S" is used to recover
3229                  * corrupted file systems, so do not mark any of the
3230                  * inodes as unused; we want e2fsck to consider all
3231                  * inodes as potentially containing recoverable data.
3232                  */
3233                 if (ext2fs_has_group_desc_csum(fs)) {
3234                         for (i = 0; i < fs->group_desc_count; i++)
3235                                 ext2fs_bg_itable_unused_set(fs, i, 0);
3236                 }
3237         } else {
3238                 /* rsv must be a power of two (64kB is MD RAID sb alignment) */
3239                 blk64_t rsv = 65536 / fs->blocksize;
3240                 blk64_t blocks = ext2fs_blocks_count(fs->super);
3241                 blk64_t start;
3242                 blk64_t ret_blk;
3243
3244 #ifdef ZAP_BOOTBLOCK
3245                 zap_sector(fs, 0, 2);
3246 #endif
3247
3248                 /*
3249                  * Wipe out any old MD RAID (or other) metadata at the end
3250                  * of the device.  This will also verify that the device is
3251                  * as large as we think.  Be careful with very small devices.
3252                  */
3253                 start = (blocks & ~(rsv - 1));
3254                 if (start > rsv)
3255                         start -= rsv;
3256                 if (start > 0)
3257                         retval = ext2fs_zero_blocks2(fs, start, blocks - start,
3258                                                     &ret_blk, NULL);
3259
3260                 if (retval) {
3261                         com_err(program_name, retval,
3262                                 _("while zeroing block %llu at end of filesystem"),
3263                                 ret_blk);
3264                 }
3265                 write_inode_tables(fs, lazy_itable_init, itable_zeroed);
3266                 create_root_dir(fs);
3267                 create_lost_and_found(fs);
3268                 reserve_inodes(fs);
3269                 create_bad_block_inode(fs, bb_list);
3270                 if (ext2fs_has_feature_resize_inode(fs->super)) {
3271                         retval = ext2fs_create_resize_inode(fs);
3272                         if (retval) {
3273                                 com_err("ext2fs_create_resize_inode", retval,
3274                                         "%s",
3275                                 _("while reserving blocks for online resize"));
3276                                 exit(1);
3277                         }
3278                 }
3279         }
3280
3281         if (journal_device) {
3282                 ext2_filsys     jfs;
3283
3284                 if (!check_plausibility(journal_device, CHECK_BLOCK_DEV,
3285                                         NULL) && !force)
3286                         proceed_question(proceed_delay);
3287                 check_mount(journal_device, force, _("journal"));
3288
3289                 retval = ext2fs_open(journal_device, EXT2_FLAG_RW|
3290                                      EXT2_FLAG_JOURNAL_DEV_OK, 0,
3291                                      fs->blocksize, unix_io_manager, &jfs);
3292                 if (retval) {
3293                         com_err(program_name, retval,
3294                                 _("while trying to open journal device %s\n"),
3295                                 journal_device);
3296                         exit(1);
3297                 }
3298                 if (!quiet) {
3299                         printf(_("Adding journal to device %s: "),
3300                                journal_device);
3301                         fflush(stdout);
3302                 }
3303                 retval = ext2fs_add_journal_device(fs, jfs);
3304                 if(retval) {
3305                         com_err (program_name, retval,
3306                                  _("\n\twhile trying to add journal to device %s"),
3307                                  journal_device);
3308                         exit(1);
3309                 }
3310                 if (!quiet)
3311                         printf("%s", _("done\n"));
3312                 ext2fs_close_free(&jfs);
3313                 free(journal_device);
3314         } else if ((journal_size) ||
3315                    ext2fs_has_feature_journal(&fs_param)) {
3316                 if (super_only) {
3317                         printf("%s", _("Skipping journal creation in super-only mode\n"));
3318                         fs->super->s_journal_inum = EXT2_JOURNAL_INO;
3319                         goto no_journal;
3320                 }
3321
3322                 if (!journal_blocks) {
3323                         ext2fs_clear_feature_journal(fs->super);
3324                         goto no_journal;
3325                 }
3326                 if (!quiet) {
3327                         printf(_("Creating journal (%u blocks): "),
3328                                journal_blocks);
3329                         fflush(stdout);
3330                 }
3331                 retval = ext2fs_add_journal_inode2(fs, journal_blocks,
3332                                                    journal_location,
3333                                                    journal_flags);
3334                 if (retval) {
3335                         com_err(program_name, retval, "%s",
3336                                 _("\n\twhile trying to create journal"));
3337                         exit(1);
3338                 }
3339                 if (!quiet)
3340                         printf("%s", _("done\n"));
3341         }
3342 no_journal:
3343         if (!super_only &&
3344             ext2fs_has_feature_mmp(fs->super)) {
3345                 retval = ext2fs_mmp_init(fs);
3346                 if (retval) {
3347                         fprintf(stderr, "%s",
3348                                 _("\nError while enabling multiple "
3349                                   "mount protection feature."));
3350                         exit(1);
3351                 }
3352                 if (!quiet)
3353                         printf(_("Multiple mount protection is enabled "
3354                                  "with update interval %d seconds.\n"),
3355                                fs->super->s_mmp_update_interval);
3356         }
3357
3358         if (ext2fs_has_feature_bigalloc(&fs_param))
3359                 fix_cluster_bg_counts(fs);
3360         if (ext2fs_has_feature_quota(&fs_param))
3361                 create_quota_inodes(fs);
3362
3363         retval = mk_hugefiles(fs, device_name);
3364         if (retval)
3365                 com_err(program_name, retval, "while creating huge files");
3366         /* Copy files from the specified directory */
3367         if (src_root_dir) {
3368                 if (!quiet)
3369                         printf("%s", _("Copying files into the device: "));
3370
3371                 retval = populate_fs(fs, EXT2_ROOT_INO, src_root_dir,
3372                                      EXT2_ROOT_INO);
3373                 if (retval) {
3374                         com_err(program_name, retval, "%s",
3375                                 _("while populating file system"));
3376                         exit(1);
3377                 } else if (!quiet)
3378                         printf("%s", _("done\n"));
3379         }
3380
3381         if (!quiet)
3382                 printf("%s", _("Writing superblocks and "
3383                        "filesystem accounting information: "));
3384         checkinterval = fs->super->s_checkinterval;
3385         max_mnt_count = fs->super->s_max_mnt_count;
3386         retval = ext2fs_close_free(&fs);
3387         if (retval) {
3388                 com_err(program_name, retval, "%s",
3389                         _("while writing out and closing file system"));
3390                 retval = 1;
3391         } else if (!quiet) {
3392                 printf("%s", _("done\n\n"));
3393                 if (!getenv("MKE2FS_SKIP_CHECK_MSG"))
3394                         print_check_message(max_mnt_count, checkinterval);
3395         }
3396
3397         remove_error_table(&et_ext2_error_table);
3398         remove_error_table(&et_prof_error_table);
3399         profile_release(profile);
3400         for (i=0; fs_types[i]; i++)
3401                 free(fs_types[i]);
3402         free(fs_types);
3403         return retval;
3404 }