Whamcloud - gitweb
Do sanity checking of the number of blocks and inodes in a group for
[tools/e2fsprogs.git] / misc / ChangeLog
1 2002-05-22  Andreas Dilger <adilger@clusterfs.com>
2
3         * mke2fs.c (set_fs_defaults): make the default inode ratio at most
4                 one inode per block for large blocksizes.
5
6 2002-05-17  Theodore Ts'o  <tytso@mit.edu>
7
8         * mke2fs.c (PRS): Determine the page size using sysconf() at
9                 runtime, instead of using the Linux system header files.
10
11 2002-05-16  Andreas Dilger <adilger@clusterfs.com>
12
13         * mke2fs.c (PRS): Allow blocksizes larger than 4k to be specified,
14                 with warning printed and the user questioned if blocksize
15                 is larger than the system's page size according to the
16                 Linux kernel header files.  Added better checking for
17                 valid inode sizes, and again print a warning message if
18                 using a large inode size (since most kernels today don't
19                 support this yet).
20         
21 2002-04-30  Theodore Ts'o  <tytso@mit.edu>
22
23         * fsck.8.in: Fix typo in man page.
24
25 2002-03-08  Theodore Tso  <tytso@mit.edu>
26
27         * Release of E2fsprogs 1.27
28
29 2002-03-08  Theodore Tso  <tytso@mit.edu>
30
31         * mke2fs.c: Check for the BSD disklabel on all architectures, and
32                 also check the byte-swapped magic number as well.
33
34 2002-03-07  Theodore Tso  <tytso@mit.edu>
35
36         * mke2fs.c: Output warnings to stderr 
37                 (From Philipp Thomas <pthomas@suse.de>)
38
39         * base_device.c (main): Fix gcc -Wall complaints in debug code.
40
41         * mke2fs.c (zap_sector): Don't erase BSD disklabels on Alpha.
42                 (From Thorsten Kukuk <kukuk@suse.de>)
43
44 2002-03-04  Philipp Thomas  <pthomas@suse.de>
45
46         * chattr.c (main), fsck.c (main), mke2fs.c (main), findsuper.c
47                 (main), dumpe2fs.c (main), lsattr.c (main), partinfo.c (main),
48                 tune2fs.c (main), mklost+found.c (main), badblocks.c
49                 (main), e2image.c (main): Newer libintl needs LC_CTYPE to
50                 be set in addition to LC_MESSAGES.
51
52 2002-02-25  Andreas Dilger  <adilger@clusterfs.com>
53
54         * mke2fs.c: Add check for mkfs.ext3 and create a journal in
55                 this case.
56
57 2002-02-24  Theodore Tso  <tytso@mit.edu>
58
59         * Makefile.in (install): Install hard links for man pages for
60                 mkfs.ext2 and mkfs.ext3.  Also install hard link for
61                 mkfs.ext3.  Remove any compressed man pages before
62                 installing the man pages.
63
64 2002-02-23  Theodore Tso  <tytso@mit.edu>
65
66         * badblocks.8.in: Clarify man page's description of the -f option
67
68 2002-02-12  Theodore Tso  <tytso@mit.edu>
69
70         * get_device_by_label.c: Since on non-STDC compilers, we define
71                 away const, include get_device_by_label.h after we include
72                 fsck.h.
73
74         * Makefile.in (base_device): Remove use of $<, which is
75                 non-portable.
76
77 2002-02-03  Theodore Tso  <tytso@thunk.org>
78
79         * Release of E2fsprogs 1.26
80
81 2002-02-03  Theodore Tso  <tytso@mit.edu>
82
83         * fsck.c (interpret_type): Allow filesystems types of the form
84                 "ext3,ext2", etc.
85
86         * fstype.c (identify_fs): Add support for only searching for a
87                 specified list of filesystems.  Also add support for
88                 identifying reiserfs filesystems.
89
90 2002-01-29  Theodore Tso  <tytso@mit.edu>
91
92         * fsck.c: Allow the number of outstanding processes fs-specific
93                 fsck programs to be capped via the FSCK_MAX_INST
94                 envrionment variable.
95
96         * fsck.8.in: Document all of the environment variables used by fsck.
97
98 2002-01-27  Theodore Tso  <tytso@mit.edu>
99
100         * tune2fs.8.in: Document the -f flag to tune2fs.
101
102 2002-01-02  Theodore Tso  <tytso@mit.edu>
103
104         * badblocks.c (main): Open the device as O_RDWR if possible, since
105                 fsync() isn't guaranteed to work if the filesystem is
106                 opened read-only.
107
108 2001-12-26  Theodore Tso  <tytso@mit.edu>
109
110         * tune2fs.8.in, tune2fs.c (parse_tune2fs_options, main): Add
111                 support for new option, -T, which allows the user to set
112                 the last checked time on the filesystem.
113
114 2001-12-24  Theodore Tso  <tytso@mit.edu>
115
116         * mke2fs.c (main, test_disk): If two -c options are
117                 specified, then perform a destructive read/write test
118                 of the disk.
119
120         * mke2fs.8.in: Document the double -c option; also encourage users
121                 to use -c instead of the -l/-L options since it's too hard
122                 for users to get things like the blocksize parameter correct.
123
124         * badblocks.8.in: Encourage users to use the -c option in mke2fs
125                 and e2fsck instead of running badblocks directly.
126
127         * mke2fs.c (create_lost_and_found): The lost+found directory is
128                 now created with 0700 permissions, since files which get
129                 dropped into that directory may have come from a protected
130                 directory, and the system administrator may not deal with
131                 immediately.  (Addresses Debian bug #118443)
132
133 2001-12-23  Theodore Tso  <tytso@mit.edu>
134
135         * Makefile.in, jfs_user.h: Move linux/jbd.h to
136                 ext2fs/kernel-jbd.h, to avoid using the system header
137                 file version of hbd.h when using diet glibc (since it
138                 forcibly adds /usr/include to the beginning of the
139                 include search path.)
140
141 2001-12-22  Theodore Tso  <tytso@mit.edu>
142
143         * get_device_by_label.c (init_lvm): Add support to read out
144                 information from the LVM proc hierarchy, so that the UUID
145                 cache can search the LVM logical volumes for UUID's,
146                 labels, etc.
147
148 2001-12-21  Theodore Tso  <tytso@mit.edu>
149
150         * dumpe2fs.c (list_bad_blocks): Change to not die if the listing
151                 of the bad blocks can't be found.  Slimmed down dumpe2fs
152                 by eliminating duplicate code paths.  
153
154 2001-12-16  Theodore Tso  <tytso@mit.edu>
155
156         * dumpe2fs.c (list_desc), fsck.c (fs_match),
157                 get_device_by_label.c (get_label_uuid), 
158                 mke2fs.c (set_fs_defaults, zap_sector, PRS),
159                 tune2fs.c (remove_journal_device, update_feature_set),
160                 util.c (figure_journal_size), util.h: Fix gcc -Wall nits.
161
162         * e2image.c (write_raw_image_file): Fix gcc -Wall nits, and use
163                 the stashed inode functions to optimize away system calls.
164
165         * Makefile.in, jfs_user.h: linux/jfs.h has been renamed to
166                 linux/jbd.h
167
168 2001-12-02  Theodore Tso  <tytso@mit.edu>
169
170         * dumpe2fs.c: Don't print the offset to the bitmap and inode table
171                 if it's negative.  Also did some generalized code clean up
172                 to slim it down the support of the -x option.
173
174 2001-11-24  Theodore Tso  <tytso@mit.edu>
175
176         * e2image.8.in: Fix cut-and-paste typo (Addresses Debian bug
177                 #119624)
178
179 2001-11-13  Theodore Tso  <tytso@mit.edu>
180
181         * util.c (check_plausibility): Use stat64 if available so that
182                 check_plausibility() works with files > 2GB.
183
184 2001-11-05  Theodore Tso  <tytso@mit.edu>
185
186         * chattr.1.in: Update the man page to document the EXT2_NOTAIL_FL
187                 flag.
188
189         * chattr.c: Add support for the EXT2_NOTAIL_FL flag.
190
191         * fsck.c (interpret_type): If the "auto" type is specified, make
192                 sure interpet_device() is called so that device
193                 specifications which use LABEL= or UUID= are translated
194                 into a real device name.
195
196 2001-10-12  Theodore Tso  <tytso@mit.edu>
197
198         * e2image.c (output_meta_data_blocks): Optimize away excess
199                 lseek() calls when creating a sparse file.  Fewer system
200                 calls are a good thing.  <g>
201
202 2001-10-07  Andreas Dilger  <adilger@turbolinux.com>
203
204         * mke2fs.c (main): Always exit with non-zero code in case of error.
205
206         * mke2fs.c (zap_sector): Check that buffer allocation succeeded.
207
208 2001-09-20  Theodore Tso  <tytso@thunk.org>
209
210         * Release of E2fsprogs 1.25
211
212 2001-09-19  Theodore Tso  <tytso@mit.edu>
213
214         * tune2fs.c (remove_journal_inode): Remove dead code that wasn't
215                 in use.
216
217         * tune2fs.8.in: Update man page to reflect the fact that adding or
218                 removing a journal doesn't require running e2fsck.
219
220 2001-09-13  Theodore Tso  <tytso@mit.edu>
221
222         * mke2fs.c (zap_sector): Allocate sufficient space for 
223                 zero-filled buffer.
224
225 2001-09-02  Theodore Tso  <tytso@thunk.org>
226
227         * Release of E2fsprogs 1.24a
228
229 2001-08-31  Andreas Dilger  <adilger@turbolinux.com>
230
231         * mke2fs.c (main): Fix version format string.
232
233 2001-08-30  Theodore Tso  <tytso@thunk.org>
234
235         * Release of E2fsprogs 1.24
236
237 2001-08-30  Theodore Tso  <tytso@valinux.com>
238
239         * badblocks.8.in: Fix spelling typo.  (Addresses Debian bug #110621)
240
241         * mke2fs.c (zap_sector): Now takes a third argument, which is how
242                 many sectors to clear out.  Fixed up Andreas's patch to
243                 make it a bit more efficient/compact.
244
245 2001-08-30  Andreas Dilger  <adilger@turbolinux.com>
246
247         * mke2fs.c (main): Zap the second sector of the disk, along with
248                 any sectors in the same filesystem block after the superblock.
249                 The latter will remove (for example) swapspace signatures
250                 on 4kB+ blocksize filesystems.  Also when zeroing the "end"
251                 of the filesystem don't actually zero the start of a very
252                 small device (less than 64 blocks).
253
254 2001-08-27  Theodore Tso  <tytso@valinux.com>
255
256         * fsck.c (main): Make version display consistent with the other
257                 e2fsprogs programs.
258
259         * lsattr.c, chattr.c, mke2fs.c, tune2fs.c, dumpe2fs.c, e2image.c,
260                 mklost+found.c: Remove EXT2FS_VERSION from the version
261                 display, since it only confuses people.
262
263 2001-08-18  Theodore Tso  <tytso@valinux.com>
264
265         * tune2fs.c (remove_journal_device): Remove unused variable
266                 check_uuid.
267
268         * get_device_by_label.h: Define function prototype for
269                 copy_string(), since this was moved from fsck.c to
270                 get_device_by_label.c by Andreas's BK changeset.
271
272 2001-08-17  Andreas Dilger  <adilger@turbolinux.com>
273
274         * get_device_by_label.[ch], fsck.c, util.c:  New interpret_spec()
275                 function in get_device_by_label.c to allow the use of
276                 UUID= or LABEL= when creating filesystems which use external
277                 journal dev (e.g.  mke2fs -J device=LABEL=<journal_label>).
278
279         * tune2fs.c: Use superblock s_journal_uuid to locate an external
280                 journal device instead of s_journal_dev when removing it.
281                 Allow opening journal devices to set the label and UUID
282                 in the ext2 superblock.
283
284         * mke2fs.c, tune2fs.c: Free journal_device after use, as it is
285                 malloc'd in interpret spec.
286  
287 2001-08-15  Theodore Tso  <tytso@valinux.com>
288
289         * Release of E2fsprogs 1.23
290
291 2001-08-15  Theodore Tso  <tytso@valinux.com>
292
293         * tune2fs.c: Make sure that error messages are sent to stderr, and
294                 normal messages are sent to stdout.  (Addresses Debian bug
295                 #108555.)
296
297         * fsck.8.in: Fixed error in synopsis of the man page.
298
299         * fsck.c (check_all): Don't bother to interpret a device where the
300                 pass number is zero.  (Addresses Debian bug #106696.)
301                 (main): Print a warning message if there are no devices to
302                 be checked.  (Addresses Debian bug #107458.)
303
304         * mke2fs.c (PRS): Handle -O and -s options in line in the getopt
305                 loop, so that -s and -O handling are a bit more intuitive.
306                 (Not that they should be mixed anyway; -s is deprecated.)
307
308         * tune2fs.c (parse_tune2fs_options): Give an error if -O is
309                 specified more than once.
310
311 2001-08-10  Theodore Tso  <tytso@valinux.com>
312
313         * mke2fs.8.in: Slim down text describing the -O flag to remove
314                 text that erroneously implied that all features
315                 (including compatible flags) aren't compatible with older
316                 kernels.
317
318 2001-08-09  Theodore Tso  <tytso@valinux.com>
319
320         * mke2fs.c (PRS): Fix bug pointed out by Christopher Niessen; if
321                 mke2fs -O none is specified, the sparse_super feature
322                 should not be present.
323
324         * e2image.c, e2image.8.in: Add support for raw image files.
325
326 2001-08-04  Andreas Dilger  <root@lynx.adilger.int>
327
328         * mke2fs.c (PRS): Put check for JOURNAL_DEV before sparse_option,
329                 so we don't set the sparse superblock flag on journal devices.
330
331 2001-07-31  Theodore Tso  <tytso@valinux.com>
332
333         * tune2fs.c (update_feature_set, remove_journal_inode): If
334                 removing an in-filesystem journal, clear out the journal
335                 inode and update the filesystem accounting structures so
336                 we don't have to run e2fsck to clean up after ourselves
337
338 2001-07-30  Theodore Tso  <tytso@valinux.com>
339
340         * tune2fs.c (update_feature_set): Don't require a forced fsck if
341                 we're removing an external journal from a filesystem.
342
343 2001-07-27  Theodore Tso  <tytso@valinux.com>
344
345         * mke2fs.c (PRS): If the blocksize is not specified and the
346                 journal device is specified, use it to determine the
347                 blocksize of the new filesystem.
348
349 2001-07-20  Theodore Tso  <tytso@valinux.com>
350
351         * fsck.8.in: Add much more explicit language documenting how the
352                 fs_passno field in /etc/fstab is handled.  (Addresses
353                 Debian bug #30833).
354
355 2001-07-19  Theodore Tso  <tytso@valinux.com>
356
357         * fstype.c (identify_fs): New file which looks at the superblock
358                 of the filesystem to determines its type.
359
360         * fsck.c (fsck_device, ignore, interpret_type): Call identify_fs
361                 if the type specified in /etc/fstab is "auto".
362
363 2001-06-23  Theodore Tso  <tytso@valinux.com>
364
365         * Release of E2fsprogs 1.22
366
367 2001-06-15  Theodore Tso  <tytso@valinux.com>
368
369         * Release of E2fsprogs 1.21
370
371 2001-06-14  Theodore Tso  <tytso@valinux.com>
372
373         * mke2fs.c (PRS): Remove unneeded test in when creating a external
374                 filesystem journal.
375
376 2001-06-13  Theodore Tso  <tytso@valinux.com>
377
378         * tune2fs.c, mke2fs.c, util.c, util.h (print_check_message): Move
379                 the message which displays how often the filesystem will
380                 be checked from mke2fs into a utility subroutine.  Then
381                 cause tune2fs to call that function to display the message
382                 after adding a journal to a filesystem.
383
384         * mke2fs.8.in: Add manual page fixups and explanation for why it's
385                 good to check filesystems periodically from Andreas
386                 Dilger.
387
388         * Makefile.in: Don't build e2image if --disable-imager is
389                 specified to configure.
390
391 2001-06-12  Theodore Tso  <tytso@valinux.com>
392
393         * dumpe2fs.c: Use WORDS_BIGENDIAN to determine whether or not
394                 we're (not) using i386 byte order.
395
396         * dumpe2fs.c, mke2fs.c: Stop using the compatibility badblocks
397                 function, and use the ext2fs_badblocks_* functions
398                 instead.
399
400         * fsck.c (device_already_active): Fixed bug which can cause fsck
401                 to core dump if there are a mix of devices with standard
402                 and non-standard names.  (Addresses Debian bug #100559)
403
404 2001-06-07  Theodore Tso  <tytso@valinux.com>
405
406         * chattr.c, lsattr.c: Don't use _FILE_BITS_OFFSET method of using
407                 the 64-bit function, since this changes the expected size
408                 of struct dirent.  Instead use lseek64 explicitly.
409
410 2001-06-01  Theodore Tso  <tytso@valinux.com>
411
412         * Makefile.in: Move include/asm/types.h.in to
413                 lib/ext2fs/ext2_types.h.in.
414
415 2001-05-25  Theodore Tso  <tytso@valinux.com>
416
417         * Release of E2fsprogs 1.20
418
419 2001-05-25  Theodore Tso  <tytso@valinux.com>
420
421         * tune2fs.c (update_feature_set): Fix capitalization typo.
422
423 2001-05-23  Theodore Tso  <tytso@valinux.com>
424
425         * partinfo.c (main): Use unsigned long instead of long when
426                 querying the size of a device using the BLKGETSIZE ioctl,
427                 to remove the 1TB limit (and turn it into a 2TB limit :-)
428
429         * fsck.c (compile_fs_type): Fix I18N compilation bug: use N_()
430                 instead of _() to initialize static variables.
431
432 2001-05-20  Theodore Tso  <tytso@valinux.com>
433
434         * fsck.8.in, fsck.c (compile_fs_type, fs_type, ignore): Fix
435                 handling of -t option to be more intuitive.  Also add
436                 support for the Mandrake -t loop hack.  See man page
437                 for description of new -t semantics.
438
439         * fsck.c (device_already_active): Fix bug in
440                 device_already_active which could cause infinite loops if
441                 we don't know the base_device of the filesystem.
442
443         * fsck.c: Make sure all exit status codes returned by fsck are
444                 consistent with the error codes documented in the fsck man
445                 page.
446
447 2001-05-14  Theodore Tso  <tytso@valinux.com>
448
449         * badblocks.c, chattr.c, dumpe2fs.c, e2image.c, findsuper.c, 
450                 lsattr.c, mke2fs.c, mklost+found.c, tune2fs.c, util.c:
451                 Change location of ext2_fs.h to be ext2fs/ext2_fs.h
452
453         * tune2fs.8.in: Fix typo's and make other clarifications suggested
454                 by Andreas Dilger.
455
456 2001-05-11  Andreas Dilger  <adilger@turbolinux.com>
457
458         * mke2fs.c: don't zap the superblock if we are running with noaction!
459                 Zap the end of the device to remove stale RAID superblocks.
460
461 2001-05-14  Theodore Tso  <tytso@valinux.com>
462
463         * tune2fs.c (update_feature_set): Clean up some printf messages.
464
465         * fsck.8.in, mke2fs.8.in, tune2fs.8.in: Fix typo's and make other
466                 clarifications suggested by Andreas Dilger.
467
468 2001-05-13  Theodore Tso  <tytso@valinux.com>
469
470         * mke2fs.c (PRS): Integrated changes from Andreas Dilger which
471                 make the revision superblock field be set to the correct
472                 value depending on if superblock features are set.
473
474 2001-05-12  Theodore Tso  <tytso@valinux.com>
475
476         * fsck.c (PRS): fsck -? now prints the usage message.
477
478         * badblocks.8.in, dumpe2fs.8.in, e2label.8.in, mke2fs.8.in, 
479                 mklost+found.8.in, tune2fs.8.in: Fix typo; removed
480                 excess "anonymous" in the AVAILABILITY section.
481
482         * chattr.1.in, lsattr.1.in, uuidgen.1.in: Update URL location of
483                 e2fsprogs package.
484
485 2001-05-07  Theodore Tso  <tytso@valinux.com>
486
487         * util.c: Use specific check for HAVE_SYS_STAT_H.
488
489 2001-05-05  Theodore Tso  <tytso@valinux.com>
490
491         * fsck.8.in: Add explicit language to describe how options get
492                 passed to filesystem-specific checkers.
493
494         * badblocks.8.in: Fixed man page to describe the first optional
495                 parameter to badblocks as last_block, instead of
496                 num_blocks.  (Debian bug #87216)
497
498         * badblocks.c: Change the blocks_count variable to be last_count,
499                 which is a more accurate description of the variable.
500
501 2001-05-03  Theodore Tso  <tytso@valinux.com>
502
503         * e2image.8.in: New manual page
504
505         * badblocks.8.in, e2label.8.in, mke2fs.8.in mklost+found.8.in, 
506                 tune2fs.8.in: Update location of e2fsprogs to be
507                 http://e2fsprogs.sourceforge.net.
508
509         * dumpe2fs.c (main): Add new flag, -i, which will allow dumpe2fs
510                 to dump out the filesystem statistics from an ext2 image
511                 file.
512         
513         * e2image.c (main): Fix format of e2image to be easier to be parse
514                 by ext2fs_open().
515
516 2001-05-01  Theodore Tso  <tytso@valinux.com>
517
518         * fsck.c (device_already_active): If we're not able to determine
519                 the base device, we should assume that the device is
520                 already active in order to force serialization.
521
522 2001-04-26  Theodore Tso  <tytso@valinux.com>
523
524         * tune2fs.c (parse_tune2fs_options): Interpret -c 0 as -c -1 (for
525                 backwards compatibility with older kernels).  -c 0 makes
526                 more sense to users.
527
528 2001-04-22  Theodore Tso  <tytso@valinux.com>
529
530         * tune2fs.c (remove_journal_device): If the force flag is given,
531                 tune2fs will remove the journal device information from
532                 the superblock even if tune2fs failed to open the journal
533                 device or otherwise other failed to remove the filesystem
534                 from journal device.
535                 (parse_tune2fs_options): Fix -j option so that it works
536                 (it was missing the open_flag being set to EXT2_FLAG_RW).
537                 (main): Accept "-U clear" to set a null UID.
538         
539 2001-04-21  Theodore Tso  <tytso@valinux.com>
540
541         * mke2fs.8.in: Manual page cleanups.  Temporarily comment out the
542                 documentation for the extern journal device support.
543
544         * mke2fs.c (usage): Remove the deprecated -s option from the usage
545                 message.
546
547 2001-04-16  Theodore Tso  <tytso@valinux.com>
548
549         * mke2fs.c (main): Add better explanation about when the
550                 filesystem will be checked after it is created.
551
552         * util.c (parse_journal_opts): Remove code which allowed a bare
553                 number to be treated as a journal size.
554
555         * mke2fs.c, tune2fs.c: Add newlines to error messages so that they
556                 look nicer.
557
558         * mke2fs.c (create_journal_dev): Call
559                 ext2fs_create_journal_superblock() first, so if it's going
560                 to error out, the user finds out before waiting for the
561                 entire device to get zero'ed.
562
563 2001-03-26  Theodore Tso  <tytso@valinux.com>
564
565         * mke2fs.8.in, tune2fs.8.in: Change man paegs to document that the
566                 journal must be bewteen 1024 and 102,400 file system
567                 blocks.
568
569         * mke2fs.c, tune2fs.c: Change to use figure_journal_size()
570
571         * util.c, util.h (figure_journal_size): Change
572                 journal_default_size into routine which also converts the
573                 requested journal size into filesystem blocks and does
574                 bounds checking to make sure the journal is sized
575                 reasonably.  Renamed function to journal_default_size.
576                 (parse_journal_opts): Remove bounds check for the journal
577                 size, since this is now done in figure_journal_size, and
578                 based on the number of filesystem blocks, as opposed to
579                 using the absolute size of the journal.
580
581 2001-02-17  Theodore Tso  <tytso@valinux.com>
582
583         * mke2fs.c (main): Flush out the "creating journal" message.
584                 Also handle the case where the default journal size
585                 returns zero blocks == no journal.  Print out how often
586                 the filesystem will be checked.
587
588 2001-02-08  Theodore Tso  <tytso@valinux.com>
589
590         * e2image.c (main): Add code to write the e2image header.
591
592 2001-02-07  Theodore Tso  <tytso@valinux.com>
593
594         * tune2fs.8.in: Update man page to reflect that 2.0.39 supports
595                 sparse_super.
596
597         * dumpe2fs.c (list_desc): Fix fencepost error when calculating the
598                 range of inode table blocks.  Add '0x' to values printed
599                 in hex.
600
601         * chattr.c, lsattr.c: Define the _LARGEFILE64_SOURCE to force the
602                 use of the LFS so that lstat will work on large files.
603
604 2001-01-17  Theodore Ts'o  <tytso@valinux.com>
605
606         * tune2fs.c, mke2fs.c, tune2fs.8.in, mke2fs.8.in: Change user
607                 interface so that -J is used to specify journal options,
608                 and -j is used to request creation of a journal using
609                 default values.  (This is a UI change, but we haven't done
610                 a formal release, and it makes things much more consistent
611                 with the rest of the options out there.) 
612
613         * tune2fs.c: Add support for removing a filesystem from an
614                 external journal; we correctly remove the filesystem UUID
615                 from the external journal's filesystem list.
616
617         * util.h, util.c (journal_default_size): New function from Andreas
618                 Dilger to calculate an appropriate default journal size
619                 given a filesystem size.
620
621         * util.c (parse_journal_opts): Allow the creation of a journal as
622                 small as 1MB.
623
624         * dumpe2fs.c (print_journal_information): Use s_first_data_block
625                 to find the correct block to read the journal superblock.
626
627 2001-01-15  Theodore Ts'o  <tytso@valinux.com>
628
629         * tune2fs.c: Changed the external journal code so that it simply
630                 adds a filesystem to a journal; the journal must have bene
631                 created via "mke2fs -O journal_dev /dev/XXX".
632
633         * mke2fs.c: Add support for creating an external journal device by
634                 using the command "mke2fs -O journal_dev /dev/XXX".  Also
635                 changed the external journal code so -j device=/dev/XXX it
636                 simply adds a filesystem to that journal; the journal must
637                 have been created via separate step.
638
639         * dumpe2fs.c (print_journal_information): Add support for dumping
640                 information about an external journal device.
641
642 2001-01-14  Theodore Ts'o  <tytso@valinux.com>
643
644         * mke2fs.c: Add new filesystem types, largefile and largefile4,
645                 for those filesystems whose average inode size is 1MB and
646                 4MB, respectively.  Allow the inode ratio specified to be
647                 has high as 4MB.   Make the s_max_mount_count vary between
648                 20 and 40, to avoid needing to check all of the
649                 filesystems at the same time.  Add some random jitter to
650                 the s_max_mount_count value so that we avoid checking all
651                 of the filesystems at the same time when we reboot.
652
653         * tune2fs.8.in: Add description of the -j option.
654
655         * tune2fs.c (add_journal): Minor fixes from Andreas Dilger. Flush
656                 stdout after printing in-progress message.  
657                 (main): Exit with status code 1 if we failed to determine
658                 the mount status of the device.
659
660 2001-01-11    <tytso@snap.thunk.org>
661
662         * e2image.c, mke2fs.c, mklost+found.c, tune2fs.c, util.c,
663                 uuidgen.c: Fix gcc -Wall complaints, including one bug in
664                 tune2fs caused by a block automatic shadowing version of
665                 the variable we really wanted to use, which broke the
666                 logic testing to see if the filesystem was mounted.
667
668         * badblocks.c (flush_bufs): Use ext2fs_sync_device() to sync and
669                 flush the device.
670
671         * mke2fs.c: Change ino_t to ext2_ino_t.
672
673 2001-01-08    <tytso@snap.thunk.org>
674
675         * Makefile.in, tune2fs.c: Move e2label functionality into tune2fs,
676                 using argv[0] as a dispatch.  This allows e2label to be
677                 (more) safely used on mounted filesystems.
678
679 2001-01-05    <tytso@snap.thunk.org>
680
681         * get_device_by_label.h (get_volume_label_by_spec): Add function
682                 prototype.
683
684         * get_device_by_label.c: Use string_copy() instead of strdup() for
685                 portability's sake.  Fix a few other gcc -Wall
686                 complaints. 
687
688         * fsck.c (string_copy): Export string_copy() extern.
689
690         * badblocks.c: Fix various gcc -Wall complaints, including
691                 an incorrect reference to sync in flush_bufs().
692
693 2001-01-03    <tytso@snap.thunk.org>
694
695         * tune2fs.c (update_feature_set, add_journal): Moved to separate
696                 functions.  Added ability to add and remove the journal
697                 while the filesystem is live.  Added support for setting
698                 a time-based UUID.  Removed zero-initialized static variables.
699
700         * mke2fs.c, util.c, util.h (strcasecmp, proceed_question,
701                 check_plausibility, parse_journal_opts, check_mount):
702                 Moved functions to util.c so they can be used by tune2fs.
703
704         * mke2fs.c (main): Change ext2fs_add_journal_fs() to 
705                 ext2fs_add_journal_inode() to reflect function renaming.
706
707 2001-01-01    <tytso@snap.thunk.org>
708
709         * mke2fs.c, e2image.c: Removed references to struct ext2fs_sb to
710                 struct ext2_super_block.
711
712         * tune2fs.c (main): Add support to allow HAS_JOURNAL flag to be
713                 cleared, but only if the filesystem is unmounted or
714                 mounted read-only.  Changed struct ext2fs_sb to struct
715                 ext2_super_block, and cleaned up old code which was needed
716                 for old versions of ext2_fs.h (not needed since we're
717                 using our own version now).
718
719 2000-12-31    <tytso@snap.thunk.org>
720
721         * fsck.c (check_all): Call interpet_device to resolve LABEL= and
722                 UUID= right away so that the device_already_active() logic
723                 can do the right thing.  Also cleaned up the the root
724                 filesystem logic checking code; fixed up a logic bug with
725                 the parallel_root option.
726
727         * lsattr.1.in: Add pointer to chattr man page for definition of
728                 the file attributes.
729
730         * lsattr.c (list_attributes): Minor cleanup to smooth out logic
731                 flow.  Also removed static initialized variables to zero.
732
733         * chattr.c (decode_arg, get_flag): Use a table-driven method for
734                 decoding the ext2 file flags character options.  Add
735                 support for the journaled data flag.
736
737         * chattr.1.in: Document the -j/+j/=j flag.
738
739 2000-12-30    <tytso@snap.thunk.org>
740
741         * mke2fs.8.in: Minor clarity edit.
742
743         * mke2fs.c (usage): Document the -j option.
744                 (main): Print the number blocks used in the journal.
745
746 2000-12-28    <tytso@snap.thunk.org>
747
748         * base_device.c (base_device): Add support for DAC960 device
749                 names.
750
751         * fsck.c (device_already_active): Handle the case where
752                 base_device doesn't know how to interpret the device name,
753                 instead of core dumping.
754
755 2000-12-09    <tytso@snap.thunk.org>
756
757         * mke2fs.c (main, parse_journal_opts): Add support for creating V1
758                 superblocks.  We now pass in a journal_flags field to the
759                 journal creation routines for this purpose.
760
761         * mke2fs.c: Remove zero initializers to save a few bytes from the
762                 executable image.  (Are we excited yet?)
763
764         * findsuper.c: And non-subtle copyright licensing restriction to
765                 get Yann to remove this program from the Debian package.  :-) 
766
767 2000-12-03    <tytso@snap.thunk.org>
768
769         * fsck.c (device_already_active): Change to use new version of
770                 base_device() which now returns dynamically allocated
771                 memory.
772
773         * base_device.c (base_device): New version moved from fsck.c which
774                 now understands ugly devfs names.  (Debian bug #65181)
775
776         * base_device.tst: Test case for base_device.c
777
778 2000-12-02    <tytso@snap.thunk.org>
779
780         * fsck.8.in: Add clarification that filesystems with a fs_passno
781                 of 0 are skipped with the -A option.  (Debian wishlist/bug
782                 #63442)
783         
784         * fsck.c (wait_one): When we let a new fsck take control of the
785                 console to display the progress bar, set FLAG_PROGRESS to
786                 so that fsck knows not to start new processes during an
787                 fsck pass with the progress bar. (Should fix debian bug
788                 #65267)
789
790         * tune2fs.8.in: Add clarifying statement about converting user and
791                 group names to uid's before storing them in the
792                 superblock.  (Debian bug #67446)
793
794 2000-11-16  Theodore Ts'o  <tytso@valinux.com>
795
796         * mke2fs.c(main): Expand the -j option so that it parses
797                 option=argument style options, and add support for
798                 creating filesystems with external journals.
799
800         * mke2fs.8.in: Document new syntax for the -j option.
801
802 2000-11-05    <tytso@snap.thunk.org>
803
804         * e2image.c, Makefile.in: New program which saves ext2 metadata to
805                 a file for people who need a last-ditch saving throw.
806
807 2000-10-24    <tytso@snap.thunk.org>
808
809         * mke2fs.c (PRS): Applied Andreas Dilger's patch to make the -r -s
810                 handling a bit more sane.  (Even though -s is deprecated
811                 at this point.)
812
813         * get_device_by_label.c: Apply fix from Erik Troan to support 16
814                 character labels.
815
816         * fsck.c (device_already_active): Add a special case check for MD
817                 devices, so we don't try to check them in parallel with
818                 other devices.
819
820         * mke2fs.c (PRS, main), mke2fs.8.in: Add support for the -j
821                 option, which builds an ext2/3 filesystem with an ext3
822                 journal.
823
824 2000-10-24    <tytso@valinux.com>
825
826         * mke2fs.c (zap_sector): Fix really stupid typo which gcc 2.95
827                 didn't catch.
828
829 2000-09-12    <tytso@valinux.com>
830
831         * fsck.c: Add base device definitions for hd[e-h], for those
832                 systems with four IDE interfaces.
833
834 2000-09-11    <tytso@valinux.com>
835
836         * mke2fs.c (zap_sector): Fix error message printed when zap_sector
837                 fails. 
838
839         * dumpe2fs.c (list_desc): Fixed format string bug when printing
840                 the inode table location in non-hex format.
841
842 2000-08-20    <tytso@valinux.com>
843
844         * get_device_by_label.c: Add call to ext2fs_find_block_device if
845                 we can't find the device using the name given by
846                 /proc/partitions.  (This can happen if devfs is compiled
847                 into the kernel, but not mounted.)
848
849 2000-06-27  Andreas Dilger <adilger@turbolabs.com>
850
851         * dumpe2fs.c (usage): add fhx options to usage message, add -x option
852                 to print out the per-group block numbers in hex, add line for
853                 location of primary/backup superblock and group descriptors
854
855         * mke2fs.c: rename max to group_blk_max avoid potential macro conflict
856
857 2000-08-14    <tytso@valinux.com>
858
859         * mke2fs.c (zap_sector): Change zap_bootsect to more general
860                 zap_sect.
861                 (main): Clear the superblock when starting mke2fs, to
862                 avoid leaving the filesystem in an inconsistent state.
863
864 2000-07-26    <tytso@valinux.com>
865
866         * get_device_by_label.c: Improve /proc/partitions parsing in
867                 fsck, and speed up fsck -a.
868
869 2000-07-13    <tytso@valinux.com>
870
871         * Release of E2fsprogs 1.19
872
873 2000-07-13    <tytso@snap.thunk.org>
874
875         * badblocks.8.in: Added text explaining that the -n and -w options
876                 are mutually exclusive.
877
878         * badblocks.c (usage): Fix usage message to make it clear that the
879                 block count must be specified if the starting block is to
880                 be specified.  (The starting block should be a option, in
881                 the long run.)
882
883         * badblocks.c (test_nd): Save and restore the currently_testing
884                 variable before going into the write verification loop.
885                 This avoids a loop termination problem if the last block
886                 on the disk is bad.  Also, turn off the SIGALRM signal
887                 while restoring blocks after the user types ^C.  The
888                 num_saved variable is now static so that it won't get
889                 clobbered by a longjmp.  buf_used and bb_count are no
890                 longer static, since they aren't used by the cleanup
891                 routines anymore.
892
893         * badblocks.c (main): Removed an unsued varaible (buf_size).
894                 Fixed bad getopt argument that didn't allow the 'b' option
895                 to take an argument.  Added error checking when parsing
896                 the starting block number.  Fixed lint warning in fscanf
897                 format string.
898
899 2000-07-06  Theodore Ts'o  <tytso@valinux.com>
900
901         * fsck.c (execute, wait_one): Treat fsck.ext3 the same as
902                 fsck.ext2 (because they are the same) for the purposes of
903                 the progress bar display logic.
904
905         * tune2fs.8.in: Update manual page to document what happens if
906                 max_mount_count is negative.
907
908         * tune2fs.c (main): Allow setting the maximal count value to be
909                 negative, since the kernel interprets that as forcing a
910                 check. 
911
912         * fsck.c (lookup, load_fs_info, check_all): Use lazy evaluation
913                 for calling interpret_device(), since this requires root
914                 privileges if the partitions need to be scanned.
915                 Otherwise, it's not possible to do non-proot fsck's for
916                 removeable devices such as floppies if there are any
917                 LABEL= or UUID= entries in /etc/fstab.
918
919         * badblocks.c (check_mount, main): Check to see if the filesystem
920                 is mounted before doing a read/write or non-destructive
921                 test.  This can be overriden using the new -f option.
922
923         * badblocks.8.in: Update manual page to reflect that the
924                 blocks-count parameter is now optional.  Also properly
925                 document the start-block parameter.  Added documentation
926                 for the -f option.
927
928         * badblocks.c (main): Allow the blocks-count parameter to be
929                 optional.   If it's not specified, use the size of the
930                 device as a default.
931
932 2000-07-05  Theodore Ts'o  <tytso@valinux.com>
933
934         * badblocks.c (test_nd): Significantly simplify the logic so that
935                 it's more obviously what's going on.  Fixed a few
936                 potential cases which weren't handled correctly in the
937                 old, overly complicated logic.
938                 (flush_bufs): Now doesn't take a second argument, and
939                 always forces a sync; this is required before it's really
940                 safe to call BLKFLSBUF, at least for some kernels.
941
942 2000-05-29  Theodore Ts'o  <tytso@valinux.com>
943
944         * mke2fs.c (PRS): Add a much more specific error message if the
945                 filesystem size is defaulted and get_device_size returns a
946                 size of zero.  Otherwise, users get a confusing "invalid
947                 argument while passed to ext2 library" error message.
948
949 2000-05-08  Theodore Ts'o  <tytso@valinux.com>
950
951         * fsck.c (interpret_device): Add better error messages if a UUID=
952                 or LABEL= specification is given.
953
954         * mke2fs.c (main): We forcibly turn off the filetype feature if
955                 the OS is the hurd, since the hurd doesn't support it.
956                 (And since the hurd allows the transmogrification of files
957                 to special files and vice versa --- for no good reason
958                 that I can understand --- it can't support the filetype
959                 feature for the forseeable future, either.)
960
961         * mke2fs.c (proceed_question): Fix reversed sense of
962                 proceed_question that was busted due to the
963                 internationalization patch.  Fixed bug where if
964                 proceed_question was called twice, the input buffer wasn't
965                 cleared of the previous question's newline.
966         
967 Thu Apr  6 17:50:25 2000  Theodore Y. Ts'o  <tytso@signal.thunk.org>
968
969         * badblocks.c (flush_bufs): Use fsync() if the system doesn't
970                 support fdatasync().
971
972 2000-04-03  Theodore Ts'o  <tytso@valinux.com>
973
974         * badblocks.c, dumpe2fs.c, e2label.c, mke2fs.c, tune2fs.c,
975                 uuidgen.c: For platforms that don't define optarg.h,
976                 manually define optarg and optind.
977
978         * badblocks.8.in: Updated manual page with suggestions from David
979                 Beattie.
980
981         * badblocks.c (test_nd): Generalized cleanup and bug-fixes.   We
982                 now explicitly clear out the signal handlers to prevent a
983                 longjmp to a deactivated stack frame.  
984                 (test_rw): Fixed a signed vs. unsigned comparison error.
985
986         * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, lsattr.1.in,
987                 mklost+found.8.in, tune2fs.8.in: Update Remy Card's e-mail
988                 address.  
989                 chattr.1.in: Update which attributes aren't supported.
990
991 2000-02-09  Theodore Ts'o  <tytso@valinux.com>
992
993         * chattr.1.in: 
994         * lsattr.1.in: Change "version" to "version/generation number".
995
996         * chattr.1.in: Fix stupid file vs filesystem typo.
997
998         * tune2fs.c Fix spelling error (spare vs sparse).
999
1000         * mke2fs.c (PRS): Add safety check to make sure the number of
1001                 blocks doesn't exceed 32 bits on a 64 bit machine.
1002
1003         * chattr.c: Random cleanup; file-only variables are now static.
1004                 Options for setting/clearings flags put into order, and
1005                 #ifdef's removed (since we now use a built-in header
1006                 file).  Add error message if user tries to set and reset
1007                 the same flag.
1008
1009         * lsattr.c: Random cleanup; file-only variables are now static.
1010                 The -l "long" listing has been changed to look nicer.
1011                 Options names have been renamed to be more descriptive.
1012         
1013 2000-02-06  Theodore Ts'o  <tytso@valinux.com>
1014
1015         * badblocks.c, chattr.c, dumpe2fs.c, e2label.c, findsuper.c,
1016                 fsck.c, get_device_by_label.c, lsattr.c, mke2fs.c, 
1017                 mklost+found.c, nls-enable.h, partinfo.c, tune2fs.c,
1018                 uuidgen.c: Add Internationalization support as 
1019                 suggested by Marco d'Itri <md@linux.it>.
1020
1021         * badblocks.c: Fix non-destructive read/write patches from David
1022                 Beattie.  Non-standard variable-length automatic arrays
1023                 removed.  Non-destrutive write test fixed so that logic is
1024                 clearer and more provably correct.  (I believe the old
1025                 code had a bug where the disk data wasn't restored if it
1026                 was interrupted at the wrong time.)
1027
1028         * badblocks.8.in: Document new options in man page.
1029
1030 2000-02-02  Theodore Ts'o  <tytso@valinux.com>
1031
1032         * fsck.c (interpret_device): If there was an attempt to interpret
1033                 a device specification of the type "UUID=" or "LABEL=",
1034                 and it fails, check to see if /proc/partitions is
1035                 readable.  If not, print a warning message about /proc
1036                 perhaps not being mounted, and exit.
1037
1038         * mke2fs.c (check_plausibility): Remove unneeded #include of
1039                 linux/fs.h.  Add #define of MAJOR if necessary.
1040
1041         * partinfo.c: Remove unneeded #include of linux/fs.h
1042
1043 2000-01-19  Theodore Ts'o  <tytso@valinux.com>
1044
1045         * tune2fs.c (usage): Update the usage message to correctly
1046                 document the -s option.
1047
1048 2000-01-18  Theodore Ts'o  <tytso@valinux.com>
1049
1050         * badblocks.c: Folded in patches David Beattie <dbeattie@usa.net>.
1051                 Need to do cleanup before release: use of GCC extensions
1052                 (dynamic arrays); unclean coding tricks (use of || instead
1053                 of if statements, etc.).  Comments from David Beattie:
1054
1055                 "I added non-destructive write-testing, and quite a few
1056                 other features.  The non-destructive write testing,
1057                 triggered by new "-n" command-line option, will write test
1058                 patterns to the disk, but only after reading data off the
1059                 disk into memory.  Then, comparing the test patterns gives
1060                 a result as to whether or not those sectors are reliable.
1061                 Finally, the original data is written back.
1062
1063                 To streamline this operation, I added another option, "-c
1064                 blocks_at_once", which will give the number of disk blocks
1065                 to process at one time (mnemonic--"count").  I made this
1066                 default to 16 (as in the read-only testing mode), and also
1067                 affect the read-only testing mode.  Of course, read-only
1068                 mode needs (count * block_size) amount of memory, and
1069                 non-destructive read-write needs 3 times that much, so it
1070                 makes sense to do the calculations and not overrun
1071                 available RAM...I would have liked to implement and
1072                 auto-memory-usage heuristic, but I have no idea if it's
1073                 even possible to determine the amount of free memory on a
1074                 Unix system except by reading /proc entries, and that
1075                 didn't seem portable.  I did NOT make this blocks_at_once
1076                 affect the behavior of the test_rw routine, as it is
1077                 processing the whole disk at once, anyway.
1078
1079                 I *think* that I got higher detection rates on my hard
1080                 drive using random test data than patterned test data, so
1081                 my non-destructive mode initializes its test data buffer
1082                 randomly.
1083
1084                 I fixed a typo in flush_bufs that caused the ioctl
1085                 BLKFLSBUF to never get compiled into the program.
1086
1087                 Also, I added an "undocumented" (I didn't put it into the
1088                 usage message; you can if you think it's useful) "-h"
1089                 option to specify the host device to flush--useful if you
1090                 want to test out my "non-destructive" code on something
1091                 other than a hard drive, such as a file on a hard drive,
1092                 and want the host hard drive to flush.
1093
1094                 I provided support for an "input" file (via option "-i",
1095                 similar to the "-o" option)...containing a list of
1096                 already-known bad blocks; it will skip testing those
1097                 blocks, thus adding speed to the bad block scan (on my
1098                 computer, hitting a physically bad block causes a
1099                 half-second-or-more freeze as the kernel waits for the
1100                 hard drive to give up and reset itself; pretty annoying
1101                 when you already know the block is bad from a previous
1102                 scan).
1103         
1104                 Finally, the real killer, the persistent re-scan (option:
1105                 "-p num_passes") that I created will, if desired,
1106                 persistently re-scan the drive until it has completed a
1107                 user-decidable number of passes in a row during which no 
1108                 new bad blocks are found.  On my drive, I would see
1109                 behavior that a certain percentage of bad blocks would be
1110                 found with each pass (it was not reliable in the defective
1111                 areas!), so I wanted it to check it over and over again
1112                 until it didn't find any more, several times.  Perhaps
1113                 this will be useful to others.  Defaults of course to
1114                 zero, meaning it will stop after the first pass.  I used
1115                 "-p 2" on my drive, and it ran for 2 1/2 days...then used
1116                 "-p 3" a couple days later and it ran for a few more
1117                 hours, and since then the rest of my drive has been
1118                 completely reliable.
1119
1120                 Implementation of these last two features, "-i" and "-p",
1121                 I did using a bb_list from libext2fs.  I debated whether
1122                 bad blocks input through "-i" should be output into the
1123                 "-o" file (or stdout, of course), and decided against it,
1124                 but left the code to do so in place, commented out, just
1125                 for your information.
1126
1127                 In order to maintain data integrity upon interruption of a
1128                 non-destructive-write test, I created a signal handler
1129                 which I install which will write back whatever original
1130                 disk data is in the buffers upon any of the fatal signals
1131                 (except SIGKILL, of course).
1132
1133                 Of course, ideally, the new options would be reflected in
1134                 the badblocks manual page, but I am not experienced at
1135                 manual page modification; if you decide my patch to
1136                 badblocks should be incorporated into the distribution, I
1137                 could learn how to update the manpage and other
1138                 documentation, or you could do it for me after exercising
1139                 your opinions, if you have any, on exactly what the
1140                 command-line parameters should be called and which ones
1141                 should be in the distribution."
1142
1143 2000-01-07  Theodore Ts'o  <tytso@valinux.com>
1144
1145         * Really fix the bug where "fsck -As" will actually allow
1146                 interactive fsck's.  (For those people who like to do
1147                 interactive fsck's in the /etc/rc scripts!?!)
1148
1149 1999-11-23    <tytso@valinux.com>
1150
1151         * tune2fs.8.in: Fix man page so that the sparse_super filesystem
1152                 option is properly named.
1153
1154 1999-11-22    <tytso@valinux.com>
1155
1156         * mke2fs.c: Change log2() and log10() to int_log2() and
1157                 int_log10() to avoid namespace collisions.  Change #ifdef
1158                 sparc to #ifdef __sparc__.
1159
1160 1999-11-19    <tytso@valinux.com>
1161
1162         * Makefile.in (distclean): Remove TAGS and Makefile.in.old from
1163                 the source directory.
1164
1165 1999-11-10    <tytso@valinux.com>
1166
1167         * Release of E2fsprogs 1.18
1168
1169 1999-11-10    <tytso@valinux.com>
1170
1171         * mke2fs.8.in: Update manual page so that the sparse_option
1172                 filesystem option is properly named.
1173
1174 1999-11-04    <tytso@valinux.com>
1175
1176         * fsck.c (main): Move setting of the interactive flag to before
1177                 the call to check_all(), so that people who try to use
1178                 fsck -As can do so interactively.
1179
1180 1999-10-26    <tytso@valinux.com>
1181
1182         * Release of E2fsprogs 1.17
1183
1184 1999-10-26    <tytso@valinux.com>
1185
1186         * fsck.c (PRS, device_already_active): Add debugging hook; if the
1187                 environment variable FSCK_FORCE_ALL_PARALLEL is set, then
1188                 force all fsck runs to happen in parallel.
1189
1190         * get_device_by_label.c (has_right_label): Fixed bug where code
1191                 used a strncmp to compare a binary UUID value which may
1192                 contain a NULL.  Fixed GCC warnings; added const to char *
1193                 typed variables.  Eliminated non-portable use of u_char.
1194
1195         * mke2fs.c (PRS): Fix gcc warnings; add const to some char *
1196                 variables, including in struct mke2fs_defaults.  
1197                 (set_fs_defaults): Changed parameter name to avoid
1198                 gcc warnings.
1199
1200         * fsck.c (wait_one): Fix gcc warnings; add #include for ctype.h,
1201                 add const to char * variables, and use NOARGS to declare
1202                 functions that take no arguments.  Also fix a memory leak
1203                 in execute() where we weren't freeing argv[] after forking
1204                 the child process.
1205
1206         * chattr.c: Add hack to compile in a definition for S_ISLNK so we
1207                 can successfully compile even with warnings turned on.
1208
1209 1999-10-25    <tytso@valinux.com>
1210
1211         * mke2fs.c (show_stats): Capitalized Hurd to make the GNU types
1212                 happy. 
1213                 (PRS): Use __u64 instead of long long for portability
1214                 reasons.   Also moved #include of sys/stat.h inside #ifdef
1215                 HAVE_LINUX_MAJOR_H for portability reasons.
1216
1217         * fsck.c (execute): Fix really stupid bug in the linked list
1218                 management which caused fsck in parallel mode to go into
1219                 an infinite loop.
1220
1221 1999-10-22    <tytso@valinux.com>
1222
1223         * Release of E2fsprogs 1.16
1224
1225 1999-10-22    <tytso@valinux.com>
1226
1227         * tune2fs.c (main): Add a new option -O which allows the user to
1228                 set and clear certain "safe" filsystem feature flags.
1229                 Currently, the only ones which are supported for
1230                 modification are sparse_superblock and filetype.
1231
1232         * mke2fs.c (PRS): Add new option -O which allows the user to
1233                 request filesystems with specific filesystem options.  By
1234                 default on 2.2 and later systems, create filesystems that
1235                 have both file type information and sparse superblocks.
1236
1237 1999-10-21    <tytso@valinux.com>
1238
1239         * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, e2label.8.in,
1240           fsck.8.in, lsattr.1.in, mke2fs.8.in, mklost+found.8.in,
1241           tune2fs.8.in, uuidgen.1.in: Update man page to use a more standard
1242                 format (bold option flags and italicized variables), as
1243                 suggested by Andreas Dilger (adilger@enel.ucalgary.ca)
1244
1245 1999-10-14    <tytso@valinux.com>
1246
1247         * tune2fs.c (main): Fix typo (double spaces) in messages regarding
1248                 changing the sparse superblock option
1249
1250         * fsck.c (wait_one): If the fsck process just started, wait a
1251                 second before sending a SIGUSR1, to give it a chance
1252                 to set the signal handler; otherwise, fsck will die on an
1253                 unhandled SIGUSR1.
1254
1255 1999-09-15    <tytso@valinux.com>
1256
1257         * mke2fs.c (show_stats): Fix display bug when printing out the
1258                 number of superblocks.  Suggested by Yann Dirson.
1259
1260 1999-09-08    <tytso@valinux.com>
1261
1262         * partinfo.c: Fix minor compilation bugs pointed out by Yann
1263                 Dirson.
1264
1265         * mke2fs.c: Don't turn on sparse superblocks by default on pre-2.2
1266                 kernels. 
1267
1268         * mke2fs.8.in: Add the possible valid block sizes for mke2fs.
1269                 Document the -n flag, and the new defaults for the -s
1270                 flag.
1271
1272         * dumpe2fs.c, dumpe2fs.8.in: Add new options -f (force) and -h
1273                 (header-only).
1274
1275 1999-08-13    <tytso@valinux.com>
1276
1277         * mke2fs.c (PRS): Fix logic for turning on/off the sparse
1278                 superblock option.
1279
1280 1999-07-18  Theodore Ts'o  <tytso@valinux.com>
1281
1282         * Release of E2fsprogs 1.15
1283
1284 1999-07-18    <tytso@rsts-11.mit.edu>
1285
1286         * mke2fs.c (PRS, set_fs_defaults): Add new option -T which allows
1287                 the user to specify the how the filesystem is to be used.
1288                 Mke2fs now chooses the filesystem parameters automatically
1289                 based on the size of the filesystem and the intended use
1290                 of the filesystem.  Add new option -n which simply goes
1291                 through the calculations to determine the parameters of
1292                 the filesystem the system would make.
1293
1294 1999-07-18    <tytso@valinux.com>
1295
1296         * fsck.c, fsck.h: Add support for new option -C.  This option will
1297                 automatically manage e2fsck processes so that they will
1298                 print completion/progress bars.  If multiple filesystems
1299                 are being checked, arrange to make sure that only one
1300                 e2fsck process is displaying a progress bar at a time.
1301
1302 1999-07-08    <tytso@valinux.com>
1303
1304         * badblocks.c (do_test): Don't complain if the write error occurs
1305                 on a non-block boundary.  This is perfectly common when
1306                 using blocksizes larger than 1k.
1307
1308 1999-07-03    <tytso@valinux.com>
1309
1310         * uuidgen.c: Add option parsing so that user can ask for either a
1311                 time-based UUID or a random-based UUID.
1312
1313 1999-07-02    <tytso@valinux.com>
1314
1315         * fsck.c: Added support for LABEL= and UUID= specifications for
1316                 the filesystem's device, to match what recent mount
1317                 programs can support.  Also, close stdin when doing fsck
1318                 -A or when checking more than one filesystem at a time, so
1319                 that e2fsck doesn't try to ask interactive questions if
1320                 the filesystem appears to be mounted.
1321
1322         * get_device_by_label.c: New file added to support LABEL=foo and
1323                 UUID=bar type specifications.
1324
1325 1999-07-01    <tytso@valinux.com>
1326
1327         * badblocks.c:  Make the "done" string include enough spaces to
1328                 clear out a large block number.
1329
1330 1999-06-29    <tytso@valinux.com>
1331
1332         * mke2fs.c (check_mount): Allow a filesystem to be made even if it
1333                 appears mounted if the force option is given.
1334
1335 1999-06-24    <tytso@valinux.com>
1336
1337         * mke2fs.8.in: Fix typo in man page which caused the badblocks
1338                 command to not show up in the "SEE ALSO" section.
1339
1340 1999-05-02    <tytso@rsts-11.mit.edu>
1341
1342         * findsuper.c: Added documentation from aeb@cwi.nl; some minor
1343                 code cleanups.
1344
1345 1999-05-20    <tytso@rsts-11.mit.edu>
1346
1347         * dumpe2fs.c, dumpe2fs.8.in: Added new command-line options which
1348                 allow a filesystem expert to specify the superblock and
1349                 blocksize when opening a filesystem.  This is mainly
1350                 useful when examining the remains of a toasted filesystem.
1351
1352 1999-03-11  Andreas Dilger <adilger@enel.ucalgary.ca>
1353
1354         * uuidgen.c, uuidgen.1.in: Created command-line utility to
1355                 generate UUIDs.
1356
1357 1999-03-14  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1358
1359         * fsck.c (fsck_device, execute): Don't dereference a null pointer
1360                 when checking a filesystem not in /etc/fstab.
1361
1362 1999-02-09  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1363
1364         * fsck.c (fsck_device): Print an error message if the user passes
1365                 in a device or directory name which isn't found in /etc/fstab.
1366                 Allow the location of /etc/fstab to be overridden by
1367                 the FSTAB_FILE environment variable.
1368
1369 1999-01-30  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1370
1371         * mke2fs.c (write_inode_tables): Add kludge code so that when the
1372                 MKE2FS_SYNC environment variable is set, mke2fs will sync
1373                 every MKE2FS_SYNC block groups, while it is writing out
1374                 the inode tables.  This is to work around a VM bug in the
1375                 2.0 kernel.  I've heard a report that a RAID user was able
1376                 to trigger it even using a 2.2 kernel.
1377
1378 1999-01-16  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1379
1380         * fsck.c (execute, wait_one): Modified routines so that they
1381                 accurately create an fsck_instance even when the noexecute
1382                 flag is set.  This allows for accurate debugging of the
1383                 fsck pass structure.
1384                 (check_all): When the verbose flag is given twice, print
1385                 debugging information about when fsck is waiting for jobs
1386                 to finish.
1387
1388 1999-01-09  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1389
1390         * Release of E2fsprogs 1.14
1391
1392 1999-01-09  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1393
1394         * fsck.8.in: Clarified and expanded the documentation for the -A
1395                 switch.
1396
1397 1999-01-07  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1398
1399         * fsck.c (load_fs_info): If the pass number field is missing, it
1400                 needs to be treated as zero.
1401
1402 1999-01-05  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1403
1404         * mke2fs.c (PRS): Add -N option to allow the user to specify
1405                 exactly how many inodes he/she wishes.
1406
1407         * chattr.c, lsattr.c: Only print the version information for the
1408                 program if the -V option is given.
1409
1410         * chattr.c: Ignore symbolic links when doing a recursive descent
1411                 through a directory.
1412
1413 1999-01-01  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1414
1415         * fsck.c (load_fs_info, parse_fstab_line): Ignore fstab lines
1416                 are commented out.  Also allow blank lines in the
1417                 /etc/fstab file.
1418                 (execute): In verbose mode, print the mountpount of the
1419                 filesystem which we are checking (user request).
1420
1421 1998-12-30  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1422
1423         * mke2fs.c: Add definition of SCSI_BLK_MAJOR if not defined, for
1424                 compatibility with Linux 1.2.13 header files.
1425
1426 1998-12-15  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1427
1428         * Release of E2fsprogs 1.13
1429
1430 1998-12-07  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1431
1432         * mke2fs.8.in: Fixed stupid typo ("Raid options are _comma_
1433                 seperated", instead of common separated)
1434
1435 1998-12-03  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1436
1437         * Makefile.in: Updated dependencies.
1438
1439 1998-11-27  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1440
1441         * fsck.c (load_fs_info): Parse /etc/fstab ourselves, instead of
1442                 relying on getmntent().  This has the advantage of
1443                 allowing us to properly handle missing pass numbers correctly.
1444
1445 1998-11-13  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1446
1447         * tune2fs.8.in: Fix minor display bug in the nroff.
1448
1449         * mke2fs.c (show_stats, write_inode_tables): Use the log10
1450                 function to calculate the display of block numbers so that
1451                 things look nice on an 80 character display.
1452
1453 1998-10-12  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1454
1455         * mke2fs.c (usage): Add the sparse-super-flag to the usage
1456                 message. 
1457
1458 1998-07-09  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1459
1460         * Release of E2fsprogs 1.12
1461
1462 1998-07-04  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1463
1464         * findsuper.c (main): Print the block group number which is now
1465                 being written by e2fsprogs.
1466
1467 1998-06-25  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1468
1469         * fsck.c (ignore): Remove unused variable cp.
1470
1471         * chattr.c (fatal_error): 
1472         * tune2fs.c (usage): 
1473         * lsattr.c (usage): 
1474         * dumpe2fs.c (usage): 
1475         * badblocks.c (usage): Remove volatile from declaration.
1476
1477         * fsck.c: Change use of strdup to be string_copy, since we don't
1478                 trust what glibc is doing with strdup.  (Whatever it is,
1479                 it isn't pretty.)
1480
1481 1998-06-19  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1482
1483         * mke2fs.c (PRS): Add a -V option which prints the version number
1484                 and exit.
1485
1486 1998-05-14  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1487
1488         * fsck.c (ignore): Remove check for filesystems with the noauto 
1489                 option.
1490
1491 1998-03-30  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1492
1493         * Makefile.in: Change to use new installation directory variables
1494                 convention.  Fix uninstall rules to take $(DESTDIR) into
1495                 account.  Remove cat8dir and cat1dir from the installdirs
1496                 target, since modern man package don't necessarily put the
1497                 cat directory in /usr/man/cat?.
1498
1499 1998-03-29  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1500
1501         * e2label.8.in: New man page to document the e2label function.
1502
1503         * e2label.c: Fix -Wall warning by making functions static.
1504
1505 1998-03-28  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1506
1507         * chattr.1.in: Document that the append-only attribute may
1508                 only be set or cleared by the superuser.
1509
1510         * Update all manual pages to that the availability section is
1511                 up-to-date. 
1512
1513         * e2label.8.in, tune2fs.8.in: Update manual page to state that
1514                 labels must be no longer than 16 characters, or they will
1515                 be truncated.
1516
1517         * e2label.c (change_label), tune2fs.c (main): If the label is
1518                 longer than 16 characters, print a warning message stating
1519                 that the label will be truncated.
1520
1521         * mke2fs.c (PRS): If the user specifies a filesystem size, and
1522                 it's larger than the apparent size of the device, print a
1523                 warning message and ask if the user wants to proceed.
1524
1525 1998-03-21  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1526
1527         * mke2fs.c (check_plausibility): Fixed spelling typo in warning
1528                 message.  Fixed up -Wall warnings in file.
1529
1530 Sun Mar  8 22:21:48 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1531
1532         * partinfo.c (main): The ioctl BLKGETSIZE requires a long, not an
1533                 int. 
1534
1535 Sun Feb  1 16:53:36 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1536
1537         * badblocks.8: Update documentation to note that output format
1538                 of badblocks is suitable for use with e2fsck -l or
1539                 mke2fs -l.
1540
1541         * mke2fs.c (handle_bad_blocks): Fix bug so that all groups with
1542                 bad superblock backup blocks are printed (not just the
1543                 first one).
1544
1545 Mon Dec  1 17:01:04 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1546
1547         * badblocks.8.in: Add documentation for the -s option.
1548
1549 Fri Oct 24 23:37:52 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1550
1551         * fsck.c: 
1552         * chattr.c: Remove #include of getopt.h, since it's not needed.
1553
1554         * tune2fs.c (main): 
1555         * lsattr.c (main): 
1556         * badblocks.c (main): 
1557         * dumpe2fs.c (main): 
1558         * mke2fs.c (PRS): Make the variable which getopt returns into be
1559                 an int, so that it won't lose on platforms where char is
1560                 unsigned. 
1561
1562 Fri Oct  3 13:38:45 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1563
1564         * mke2fs.c (parse_raid_opts): Make parse_raid_opts return a void,
1565                 to fix a -Wall warning.
1566
1567 Mon Sep 15 22:07:12 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1568
1569         * tune2fs.c (main): 
1570         * mklost+found.c (main): 
1571         * lsattr.c (main): 
1572         * dumpe2fs.c (main): 
1573         * chattr.c (main): 
1574         * badblocks.c (main): Declare main to return an int, as required.
1575                 Make sure main always ends with an exit(0).  (Some
1576                 programs weren't doing this, and thus were returning a
1577                 random exit value.)
1578
1579 Mon Jul 14 15:27:29 1997  Theodore Y. Ts'o  <tytso@mit.edu>
1580
1581         * e2label.c: New file contributed by Andries Brouwer which
1582                 provides an easy-to-use interface to modify the filesystem
1583                 label.
1584         
1585         * Makefile.in (SPROGS): Add Makefile support to build e2label
1586
1587 Tue Jun 17 01:33:20 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1588
1589         * Release of E2fsprogs 1.11
1590
1591 Mon Jun 16 23:37:54 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1592
1593         * mke2fs.c (show_stats): Adjust the number of columns printed when
1594                 displaying the superblock backups to avoid running over 
1595                 80 columns when making a really big disk.
1596
1597 Thu May  8 22:22:08 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1598
1599         * badblocks.8.in, chattr.1.in, dumpe2fs.8.in, fsck.8.in, 
1600                 mke2fs.8.in, tune2fs.8.in: Fix minor typos and grammer
1601                 oops found by Bill Hawes (whawes@star.net).
1602
1603         * mke2fs.c (test_disk): Pass the blocksize to the bad blocks
1604                 command so that all of the filesystem gets tested in the
1605                 case where the blocksize 2048 or 4096.
1606
1607 Thu Apr 24 12:16:42 1997  Theodre Ts'o  <tytso@localhost.mit.edu>
1608
1609         * Release of E2fsprogs version 1.10
1610
1611 Thu Apr 24 09:52:47 1997  Theodre Ts'o  <tytso@localhost.mit.edu>
1612
1613         * mke2fs.c: Added new option -R, which specifies RAID options.
1614                 Currently the only supported RAID option is "stride" which
1615                 specifies the stripe width in RAID filesystem.  This is
1616                 used to aid in the placement of the inode and block
1617                 bitmaps.
1618
1619         * mke2fs.8.in, tune2fs.8.in: Added warnings that the sparse
1620                 superblock option isn't yet supported by most kernels.
1621
1622 Wed Apr 23 22:42:51 1997  Theodre Ts'o  <tytso@localhost.mit.edu>
1623
1624         * mke2fs.c (PRS): Make the default filesystem revision be 0, not
1625                 1.  (Since some people are still worried about 1.2.13
1626                 compatibility).
1627
1628 Thu Apr 17 12:23:38 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1629
1630         * Release of E2fsprogs version 1.09
1631
1632 Fri Apr 11 18:57:24 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1633
1634         * chattr.1.in: Updated man page so that the 'A' attribute is
1635                 specified everywhere.
1636
1637         * chattr.c (usage): Added usage message for the 'A' attribute.
1638
1639 Fri Apr 11 18:56:26 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1640
1641         * Release of E2fsprogs version 1.08
1642
1643 Thu Apr 10 07:08:03 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1644
1645         * dumpe2fs.c (list_desc): List the offsets of the inode and block
1646                 bitmaps, and the inode table.  List the block boundaries
1647                 for the groups.
1648
1649 Sat Apr  5 11:55:52 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1650
1651         * tune2fs.c (main): Implement the -s flag allows the user to
1652                 set and reset the sparse superblock flag.
1653
1654         * mke2fs.c (PRS): By default generate DYNAMIC revision
1655                 filesystems.  The -s flag controls whether or not the
1656                 sparse superblock flag is set.
1657                 (PRS): Change to allow the user to specify the true
1658                 maximum number of blocks per group to reflect the
1659                 blocksize. 
1660
1661 Wed Mar 12 13:32:05 1997  Theodore Y. Ts'o  <tytso@mit.edu>
1662
1663         * Release of E2fsprogs version 1.07
1664
1665 Thu Mar  6 17:15:05 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1666
1667         * mke2fs.c (create_root_dir): Set the root directory's i_uid and
1668                 i_gid to be the real user and group id.
1669
1670 Tue Mar  4 10:14:33 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1671
1672         * mke2fs.c (check_plausibility): Add more intelligent error
1673                 messages when the device doesn't exist.
1674
1675 Sat Mar  1 10:43:32 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1676
1677         * fsck.c (main): Fix bug where the PATH environment variable isn't
1678                 set when it is unset.
1679
1680 Tue Jan 14 12:30:45 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1681
1682         * mke2fs.c (write_inode_tables): Fixed bug in write_inode_tables
1683                 where a loop variable was getting reused in a nested loop.
1684                 This caused the inode table to not be correctly
1685                 initialized.
1686
1687 Thu Jan  2 00:00:37 1997  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1688
1689         * lsattr.c, chattr.c: Include string.h, since we use memcpy().
1690
1691         * findsuper.c: Use time_t for ctime(), not __u32.
1692
1693 Sat Dec 28 23:39:18 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1694
1695         * badblocks.c: Adapted -vv modifications from Rik Faith so that
1696                 they frequently update the block number field.
1697
1698         * badblocks.8.in: Document the optional start-block parameter
1699
1700 Mon Oct 14 11:52:58 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1701
1702         * mke2fs.c: Updated to use new ext2fs_allocate_tables() function.
1703
1704 Tue Oct  8 02:02:03 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1705
1706         * Release of E2fsprogs version 1.06
1707
1708 Mon Oct  7 00:56:24 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1709
1710         * chattr.1.in: Documented the 'A' (noatime) attribute.
1711
1712         * dumpe2fs.c (main): Change EXT2_SWAP to EXT2_FLAG_SWAP for
1713                 consistency's sake.
1714
1715 Sun Sep 22 16:18:47 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1716
1717         * chattr.c (decode_arg): Add support for the 'A' (noatime) flag.
1718
1719 Thu Sep 12 15:23:07 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1720
1721         * Release of E2fsprogs version 1.05
1722
1723 Sat Sep  7 07:34:11 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1724
1725         * tune2fs.c (main): Add support for new option -C, which sets the 
1726                 current number of mounts.
1727                 (main): Allow the interval to be specified in seconds,
1728                 mostly for debugging.
1729
1730 Tue Aug 27 17:27:43 1996  Miles Bader  <miles@gnu.ai.mit.edu>
1731
1732         * Makefile.in (SMANPAGES): Use @FSCK_MAN@ instead of fsck.8.
1733         (SPROGS): Use @FSCK_PROG@ instead of fsck.
1734
1735 Thu Aug 22 00:51:44 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1736
1737         * mke2fs.c (zap_bootblock): Don't do zap_bootblock on a
1738                 sparc.
1739
1740 Tue Aug 20 00:15:46 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1741
1742         * chattr.c (main): Fixed bug so that chattr -v works.  (Bug report
1743                 and fix sent by Charles Howes, chowes@eznet.ca)
1744
1745 Fri Aug  9 11:52:42 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1746
1747         * tune2fs.8.in:
1748         * tune2fs.c: Added support for the -L option which sets the volume
1749                 label, the -M option which sets the last mounted
1750                 directory, and the -U option which sets the filesystem UUID.
1751
1752         * mke2fs.8.in:
1753         * mke2fs.c: Added support for the -o option, which overrides the
1754                 creator OS.  Generate a UUID for the filesystem, if
1755                 applicable.  Added support for the -L option which sets
1756                 the volume label, and the -M option which sets the last
1757                 mounted directory.
1758
1759 Sat Jun 22 17:43:17 1996  Remy Card  <card@bbj.linux.eu.org>
1760
1761         * chattr.c (decode_arg): Integrated Michael Nonweiler's fix to
1762                 avoid a segmentation fault when the "-v" option is used
1763                 and no version number is specified.
1764         
1765 Thu May 16 11:12:30 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1766
1767         * Release of E2fsprogs version 1.04
1768
1769 Wed May 15 21:15:43 1996  Theodore Ts'o  <tytso@rsts-11.mit.edu>
1770
1771         * Makefile.in (fsck): fsck doesn't need to be linked with the ext2
1772                 libraries.
1773
1774 Wed Mar 27 00:33:40 1996    <tytso@rsts-11.mit.edu>
1775
1776         * Release of E2fsprogs version 1.03
1777
1778 Thu Mar  7 03:43:20 1996    <tytso@rsts-11.mit.edu>
1779
1780         * mke2fs.c (PRS): Add (for development only) support to
1781                 specify revision and inode size of the new filesystem.
1782
1783 Tue Mar  5 03:51:35 1996    <tytso@rsts-11.mit.edu>
1784
1785         * mke2fs.8.in: Fix a few minor typo's in the man page.
1786
1787         * mke2fs.c (reserve_inodes): Add support for dynamic first inode
1788                 revision.
1789
1790 Mon Feb  5 22:19:49 1996    <tytso@rsts-11.mit.edu>
1791
1792         * fsck.c (check_all, PRS): Added new flag -P, which turns on the
1793                 parallel root option.  This allows you to check the root
1794                 filesystem in parallel with the other filesystems.  Note
1795                 that this is not the safest thing in the world to do,
1796                 since if the root filesystem is in doubt things like
1797                 the e2fsck executable might be corrupted!  But some
1798                 sysadmins, who don't want to repartition the root
1799                 filesystem to be small and compact, may really want this
1800                 option turned on.
1801
1802 Wed Jan 31 11:06:08 1996    <tytso@rsts-11.mit.edu>
1803
1804         * Release of E2fsprogs version 1.02
1805
1806 Tue Oct 30 21:14:12 1995    <tytso@rsts-11.mit.edu>
1807
1808         * mke2fs.c (check_plausibility): Add check to warn user if they
1809                 are trying to mke2fs the whole disk.  (/dev/hda
1810                 vs. /dev/hda1)
1811
1812 Fri Dec 15 19:09:56 1995    <tytso@rsts-11.mit.edu>
1813
1814         * fsck.c (check_all): If we break out of the loop because we are
1815                 serializing and have just started at fsck we haven't
1816                 finished the pass. We need to go round again in case there
1817                 are more filesystems to be done in this pass.  (Patch
1818                 submitted by Mike Jagdis)
1819
1820 Sat Dec  9 10:07:16 1995    <tytso@rsts-11.mit.edu>
1821
1822         * dumpe2fs.c (in_use): test_bit() was renamed to
1823                 ext2fs_test_bit().
1824
1825 Mon Oct 30 20:21:18 1995    <tytso@rsts-11.mit.edu>
1826
1827         * fsck.c (fsck_device): Check fstype instead of type; this was a
1828                 stupid typo which caused coredumps in some cases.
1829
1830 Thu Oct 26 12:05:18 1995    <tytso@rsts-11.mit.edu>
1831
1832         * Makefile.in (install): Strip programs when they are installed.
1833
1834 Fri Aug 18 15:10:40 1995  Theodore Y. Ts'o  <tytso@dcl>
1835
1836         * mke2fs.c (PRS): Move call of check_mount() from main() to PRS(),
1837                 so we do the check to see if the filesystem is mounted
1838                 *before* we try to determine the size of the device.
1839
1840 Wed Sep  6 23:34:07 1995  Remy Card  <card@bbj>
1841
1842         * fsck.c (load_fs_info): Load the informations from /etc/fstab in
1843                 the same order.
1844
1845 Thu Aug 17 22:33:09 1995    <tytso@rsts-11.mit.edu>
1846
1847         * mke2fs.c (check_mount): Use the new ext2fs_check_if_mounted()
1848                 function to determine if the device is mounted.
1849
1850         * mke2fs.c (PRS): Change call to use the new
1851                 ext2fs_get_device_size() function in order to determine
1852                 the size of the filesystem.  Remove get_size() and
1853                 is_valid_offset(), which are no longer called.
1854
1855 Fri Aug 11 08:26:24 1995  Theodore Y. Ts'o  <tytso@lurch.mit.edu>
1856
1857         * fsck.c (fsck_device): Make sure fstype has been set by the user
1858                 and that it does not begin with "no" and the user has
1859                 specified exactly one type before using it as the type to
1860                 check.
1861
1862 Fri Aug 11 14:17:18 1995  Remy Card  <card@bbj>
1863
1864         * badblocks.8:
1865         * chattr.1:
1866         * dumpe2fs.8:
1867         * fsck.8:
1868         * lsattr.1:
1869         * mke2fs.8:
1870         * mklost+found.8:
1871         * tune2fs.8: Updated date and version number.
1872
1873 Thu Aug 10 14:18:36 1995  Remy Card  <card@bbj>
1874
1875         * tune2fs.c: Fixed a bug which prevented the use of user and group
1876                 names with the -g and -u options.  Thanks to Jean Christophe
1877                 ANDRE <progfou@mycrob.cafard.freenix.fr>.
1878
1879         * mke2fs.8:
1880         * tune2fs.8: Fixed a spelling error in Ted's name :-)
1881
1882 Wed Aug  9 20:41:54 1995  Theodore Y. Ts'o  <tytso@dcl>
1883
1884         * mke2fs.c (count_blocks): Divide the size by
1885                 EXT2_BLOCK_SIZE(&param), instead of assuming that the
1886                 blocksize is always 1024 bytes.
1887
1888 Sat Aug  5 12:00:51 1995  Theodore Y. Ts'o  <tytso@lurch.mit.edu>
1889
1890         * mke2fs.c (PRS): Use malloc() instead of alloca() --- alloca() is
1891                 not portable!!  In any case putenv() in some systems must
1892                 take a static character array or malloc()'ed memory;
1893                 passing memory allocated using alloca() to putenv() is not
1894                 advisable.
1895
1896         * chattr.c (chattr_dir_proc): 
1897         * lsattr.c (lsattr_dir_proc): Use malloc() instead of alloca() ---
1898                 alloca is not portable!
1899
1900         * fsck.c (fsck_device): If the filesystem type is specified by the
1901                 user using the -t option, let it override the type in
1902                 /etc/fstab.
1903
1904         * fsck.c (strdup): Don't build strdup() if the system defines it.
1905
1906 Mon Jun 12 19:15:10 1995  Theodore Y. Ts'o  (tytso@dcl)
1907
1908         * chattr.c, lsattr.c: Include <sys/types.h> for <dirent.h>'s
1909                 benefit.
1910
1911         * The $(UPROGS) go in bin, not sbin.
1912
1913         * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c,
1914                 tune2fs.c:  Don't include <getopt.h> if it doesn't exist.
1915
1916 Mon Jun 12 16:36:04 1995  Theodore Y. Ts'o  <tytso@dcl>
1917
1918         * badblocks.c, chattr.c, dumpe2fs.c, fsck.c, lsattr.c, mke2fs.c,
1919                 tune2fs.c: Only include getopt.h if HAVE_GETOPT_H is defined.
1920
1921 Sat Jun 10 23:37:09 1995  Theodore Y. Ts'o  <tytso@lurch.mit.edu>
1922
1923         * chattr.c: Include errno.h, since we use errno
1924
1925         * fsck.c (load_fs_info): If HAVE_MNTENT_H is not defined,
1926                 explicitly initialize filesys_info to be NULL.
1927
1928         * mke2fs.c: Include the stdio.h and errno.h header files
1929
1930 Thu Jun  8 13:25:23 1995  Miles Bader  <miles@churchy.gnu.ai.mit.edu>
1931
1932         * mke2fs.c: Only include <linux/fs.h> if we can.
1933         (get_size): Don't try to use the BLKGETSIZE ioctl unless it's defined.
1934         (check_mount): Only check to see if the device is mounted if
1935         HAVE_MNTENT_H is defined (by configure).
1936
1937         * fsck.c (load_fs_info): Only try to get info about filesystems if
1938         HAVE_MNTENT_H is defined (by configure).
1939         (main): Allocate space for a new fsck_path instead of append to a
1940         statically sized buffer.
1941         (PRS): Use alloca to allocate the new path string, instead of
1942         having a fixed size buffer (which was the wrong size anyway).
1943
1944         * chattr.c (chattr_dir_proc): Use alloca to allocate space for a
1945         filename instead of using a fixed-size buffer.
1946         * lsattr.c (lsattr_dir_proc): Ditto.
1947         * mklost+fond.c (main): Calculate the actual needed size for the
1948         path buffer instead of using MAXPATHLEN (which not all systems have).
1949
1950         * badblocks.c: Only include linux include files if we have them.
1951         (flush_bufs): New function to flush a block device, optionally
1952         syncing it first.  This replaces other copies of this code.
1953         (test_ro): Replace calls to ioctl with flush_bufs().
1954         (test_rw): Ditto.
1955
1956         * Makefile.in: Rewritten to conform to GNU coding standards and
1957         support separate compilation directories.
1958
1959 Sat Mar 11 10:59:58 1995  Theodore Y. Ts'o  <tytso@localhost>
1960
1961         * mke2fs.c (main, zap_bootblock): Added new function
1962                 zap_bootblock() which clears the first 512 bytes of the
1963                 filesystem.  This protects the filesystem from being
1964                 misidentified as a MS-DOS FAT filesystem.
1965
1966         * badblocks.c (alarm_intr, test_ro, test_rw): Increase the space
1967                 allocated for printing the block numbers, so that the
1968                 display doesn't get corrupted when running badblocks on a
1969                 very large partition.
1970
1971         * badblocks.c (do_test, test_ro, test_rw): Added missing cast to
1972                 ext2_loff_t, so that when checking a large device,
1973                 spurious seek errors aren't reported.
1974
1975         * mke2fs.c (count_blocks): Declare mid to be of type ext2_loff_t
1976                 instead of type int, so that it works for filesystems
1977                 greater than 2 GB.  (Fortunately count_blocks is only
1978                 called if the device does not support the BLKGETSIZE
1979                 ioctl, which most do.)
1980
1981         * fsck.c (ignore): Add check to ignore filesystems with a pass
1982                 number of zero.  (This check was accidentally deleted at
1983                 during 0.5b development.)
1984
1985 Sat Dec 31 00:47:16 1994    <tytso@rsx-11.mit.edu>
1986
1987         * mke2fs.c (new_table_block, alloc_tables, PRS, main): Add a new
1988                 option, -S, which only writes the superblock and group
1989                 descriptors.  Useful for recovering when all of the
1990                 superblocks are corrupted somehow (as a last ditch
1991                 measure).
1992
1993                 Also, don't bother initializing the bitmap blocks in
1994                 alloc_tables(), since they will be overwritten at the end
1995                 anyway.  (Should speed up mke2fs by a little.)
1996
1997 Tue Dec  6 02:20:55 1994    <tytso@rsx-11.mit.edu>
1998
1999         * fsck.c (main): Fix stupid typo where a null inst would be freed. 
2000
2001         * fsck.c (wait_one): Check WIFEXITED on status before trying to
2002                 extract the exit status.  In other cases, return
2003                 FSCK_ERROR if the back end processor exited with a signal.
2004
2005 Tue Nov 15 10:20:00 1994  Remy Card  <card@bbj>
2006
2007         * tune2fs.c (main): Fixed a bug which prevented the use of the
2008                 new options.
2009         Added the `w' (week) suffix recognition in the check interval.
2010
2011 Sun Nov 13 15:58:48 1994    (tytso@rsx-11)
2012
2013         * fsck.c (load_fs_info): If the user has an obviously old
2014                 /etc/fstab file, issue a warning message and assume that
2015                 all partitions should be checked.
2016
2017 Sat Nov 12 00:33:18 1994    (tytso@rsx-11)
2018
2019         * dumpe2fs.c (list_desc): Update to new inode and block bitmap
2020                 structures. 
2021
2022         * mke2fs.c (create_root_dir): Create the root directory owned by
2023                 the effective uid.
2024
2025 Mon Nov  7 22:04:37 1994  Remy Card  <card@bbj>
2026
2027         * tune2fs.c (main.c): Added support for new options:
2028         -r reserved_blocks_count, -g reserved_gid, -u reserved_uid.
2029
2030 Sun Aug 21 00:57:33 1994  Theodore Y. Ts'o  (tytso@rt-11)
2031
2032         * fsck.c (ignore): If the pass number is 0, ignore the filesystem.
2033
2034 Wed Aug 17 21:55:03 1994  Remy Card  (card@bbj)
2035
2036         * badblocks.c (test_rw): Added verbose output like in the
2037         read-only test.
2038
2039         (do_test and test_rw): Use the llseek system call if available.
2040
2041         * chattr.c: Added support for new attributes.
2042
2043         * lsattr.c: Added support for long format.
2044
2045         * mke2fs.c (usage): Fixed bogus usage message.
2046
2047         (valid_offset): Use the llseek system call if available.
2048
2049 Wed Aug 17 10:50:57 1994  Theodore Y. Ts'o  (tytso@rt-11)
2050
2051         * mke2fs.c (handle_bad_blocks): Check to see if a bad block is
2052         where a backup superblock/group descriptor is stored.  If so,
2053         print a warning message and adjust the superblock counts so that
2054         they are correct.  (Otherwise, the bad block will get counted
2055         twice and the # of free blocks count will be wrong.)
2056
2057         (alloc_tables): Removed code which calcualated the free block
2058         statistics, which was moved to lib/ext2fs/initialize.c.  This
2059         allows the bad block code to adjust the group descriptor
2060         statistics if necessary.