2 .\" Copyright 1993, 1994, 1995 by Theodore Ts'o. All Rights Reserved.
3 .\" This file may be copied under the terms of the GNU Public License.
5 .TH E2FSCK 8 "@E2FSPROGS_MONTH@ @E2FSPROGS_YEAR@" "E2fsprogs version @E2FSPROGS_VERSION@"
7 e2fsck \- check a Linux ext2/ext3/ext4 file system
31 @JDEV@.I external-journal
44 is used to check the ext2/ext3/ext4 family of file systems.
45 For ext3 and ext4 filesystems that use a journal, if the system has been
46 shut down uncleanly without any errors, normally, after replaying the
47 committed transactions in the journal, the file system should be
48 marked as clean. Hence, for filesystems that use journalling,
50 will normally replay the journal and exit, unless its superblock
51 indicates that further checking is required.
54 is a block device (e.g.,
56 or file containing the file system.
58 Note that in general it is not safe to run
60 on mounted filesystems. The only exception is if the
62 option is specified, and
69 specified. However, even if it is safe to do so, the results printed by
71 are not valid if the filesystem is mounted. If
73 asks whether or not you should check a filesystem which is mounted,
74 the only correct answer is ``no''. Only experts who really know what
75 they are doing should consider answering this question in any other way.
79 is run in interactive mode (meaning that none of
84 are specified), the program will ask the user to fix each problem found in the
85 filesystem. A response of 'y' will fix the error; 'n' will leave the error
86 unfixed; and 'a' will fix the problem and all subsequent problems; pressing
87 Enter will proceed with the default response, which is printed before the
88 question mark. Pressing Control-C terminates e2fsck immediately.
92 This option does the same thing as the
94 option. It is provided for backwards compatibility only; it is
95 suggested that people use
97 option whenever possible.
100 Instead of using the normal superblock, use an alternative superblock
103 This option is normally used when the primary superblock has been
104 corrupted. The location of backup superblocks is dependent on the
105 filesystem's blocksize, the number of blocks per group, and features
109 Additional backup superblocks can be determined by using the
113 option to print out where the superblocks exist, supposing
115 is supplied with arguments that are consistent with the filesystem's layout
116 (e.g. blocksize, blocks per group,
120 If an alternative superblock is specified and
121 the filesystem is not opened read-only, e2fsck will make sure that the
122 primary superblock is updated appropriately upon completion of the
128 will search for the superblock at various different
129 block sizes in an attempt to find the appropriate block size.
130 This search can be fooled in some cases. This option forces
132 to only try locating the superblock at a particular blocksize.
133 If the superblock is not found,
135 will terminate with a fatal error.
142 program to do a read-only scan of the device in order to find any bad
143 blocks. If any bad blocks are found, they are added to the bad block
144 inode to prevent them from being allocated to a file or directory. If
145 this option is specified twice, then the bad block scan will be done
146 using a non-destructive read-write test.
151 to write completion information to the specified file descriptor
152 so that the progress of the filesystem
153 check can be monitored. This option is typically used by programs
156 If the file descriptor number is negative, then absolute value of
157 the file descriptor will be used, and the progress information will be
158 suppressed initially. It can later be enabled by sending the
160 process a SIGUSR1 signal.
161 If the file descriptor specified is 0,
163 will print a completion bar as it goes about its business. This requires
164 that e2fsck is running on a video console or terminal.
167 Print debugging output (useless unless you are debugging
171 Optimize directories in filesystem. This option causes e2fsck to
172 try to optimize all directories, either by reindexing them if the
173 filesystem supports directory indexing, or by sorting and compressing
174 directories for smaller directories, or for filesystems using
175 traditional linear directories.
181 may sometimes optimize a few directories --- for example, if
182 directory indexing is enabled and a directory is not indexed and would
183 benefit from being indexed, or if the index structures are corrupted
184 and need to be rebuilt. The
186 option forces all directories in the filesystem to be optimized. This can
187 sometimes make them a little smaller and slightly faster to search, but
188 in practice, you should rarely need to use this option.
192 option will detect directory entries with duplicate names in a single
193 directory, which e2fsck normally does not enforce for performance reasons.
195 .BI \-E " extended_options"
196 Set e2fsck extended options. Extended options are comma
197 separated, and may take an argument using the equals ('=') sign. The
198 following options are supported:
201 .BI ea_ver= extended_attribute_version
202 Set the version of the extended attribute blocks which
204 will require while checking the filesystem. The version number may
205 be 1 or 2. The default extended attribute version format is 2.
208 Only replay the journal if required, but do not perform any further checks
212 During pass 1, print a detailed report of any discontiguous blocks for
213 files in the filesystem.
216 Attempt to discard free blocks and unused inode blocks after the full
217 filesystem check (discarding blocks is useful on solid state devices and sparse
218 / thin-provisioned storage). Note that discard is done in pass 5 AFTER the
219 filesystem has been fully checked and only if it does not contain recognizable
220 errors. However there might be cases where
222 does not fully recognize a problem and hence in this case this
223 option may prevent you from further manual data recovery.
226 Do not attempt to discard free blocks and unused inode blocks. This option is
227 exactly the opposite of discard option. This is set as default.
229 .BI no_optimize_extents
230 Do not offer to optimize the extent tree by eliminating unnecessary
231 width or depth. This can also be enabled in the options section of
232 .BR /etc/e2fsck.conf .
235 Offer to optimize the extent tree by eliminating unnecessary
236 width or depth. This is the default unless otherwise specified in
237 .BR /etc/e2fsck.conf .
239 .BI inode_count_fullmap
240 Trade off using memory for speed when checking a file system with a
241 large number of hard-linked files. The amount of memory required is
242 proportional to the number of inodes in the file system. For large file
243 systems, this can be gigabytes of memory. (For example, a 40TB file system
244 with 2.8 billion inodes will consume an additional 5.7 GB memory if this
245 optimization is enabled.) This optimization can also be enabled in the
247 .BR /etc/e2fsck.conf .
249 .BI no_inode_count_fullmap
251 .B inode_count_fullmap
252 optimization. This is the default unless otherwise specified in
253 .BR /etc/e2fsck.conf .
256 Use this many KiB of memory to pre-fetch metadata in the hopes of reducing
257 e2fsck runtime. By default, this is set to the size of two block groups' inode
258 tables (typically 4MiB on a regular ext4 filesystem); if this amount is more
259 than 1/50th of total physical memory, readahead is disabled. Set this to zero
260 to disable readahead entirely.
263 Convert block-mapped files to extent-mapped files.
266 Only fix damaged metadata; do not optimize htree directories or compress
267 extent trees. This option is incompatible with the -D and -E bmap2extent
271 If the filesystem has shared blocks, with the shared blocks read-only feature
272 enabled, then this will unshare all shared blocks and unset the read-only
273 feature bit. If there is not enough free space then the operation will fail.
274 If the filesystem does not have the read-only feature bit, but has shared
275 blocks anyway, then this option will have no effect. Note when using this
276 option, if there is no free space to clone blocks, there is no prompt to
277 delete files and instead the operation will fail.
279 Note that unshare_blocks implies the "-f" option to ensure that all passes
280 are run. Additionally, if "-n" is also specified, e2fsck will simulate trying
281 to allocate enough space to deduplicate. If this fails, the exit code will
286 Force checking even if the file system seems clean.
289 Flush the filesystem device's buffer caches before beginning. Only
290 really useful for doing
294 @JDEV@.BI \-j " external-journal"
295 @JDEV@Set the pathname where the external-journal for this filesystem can be
299 When combined with the
301 option, any existing bad blocks in the bad blocks list are preserved,
302 and any new bad blocks found by running
304 will be added to the existing bad blocks list.
307 Add the block numbers listed in the file specified by
309 to the list of bad blocks. The format of this file is the same as the
312 program. Note that the block numbers are based on the blocksize
313 of the filesystem. Hence,
315 must be given the blocksize of the filesystem in order to obtain correct
316 results. As a result, it is much simpler and safer to use the
320 since it will assure that the correct parameters are passed to the
325 Set the bad blocks list to be the list of blocks specified by
327 (This option is the same as the
329 option, except the bad blocks list is cleared before the blocks listed
330 in the file are added to the bad blocks list.)
333 Open the filesystem read-only, and assume an answer of `no' to all
336 to be used non-interactively. This option
337 may not be specified at the same time as the
344 Automatically repair ("preen") the file system. This option will cause
347 fix any filesystem problems that can be safely fixed without human
350 discovers a problem which may require the system administrator
351 to take additional corrective action,
353 will print a description of the problem and then exit with the value 4
354 logically or'ed into the exit code. (See the \fBEXIT CODE\fR section.)
355 This option is normally used by the system's boot scripts. It may not
356 be specified at the same time as the
363 This option does nothing at all; it is provided only for backwards
367 Print timing statistics for
369 If this option is used twice, additional timing statistics are printed
370 on a pass by pass basis.
376 Print version information and exit.
379 Assume an answer of `yes' to all questions; allows
381 to be used non-interactively. This option
382 may not be specified at the same time as the
389 Before overwriting a file system block, write the old contents of the block to
390 an undo file. This undo file can be used with e2undo(8) to restore the old
391 contents of the file system should something go wrong. If the empty string is
392 passed as the undo_file argument, the undo file will be written to a file named
393 e2fsck-\fIdevice\fR.e2undo in the directory specified via the
394 \fIE2FSPROGS_UNDO_DIR\fR environment variable.
396 WARNING: The undo file cannot be used to recover from a power or system crash.
398 The exit code returned by
400 is the sum of the following conditions:
404 \ 1\ \-\ File system errors corrected
406 \ 2\ \-\ File system errors corrected, system should
410 \ 4\ \-\ File system errors left uncorrected
412 \ 8\ \-\ Operational error
414 \ 16\ \-\ Usage or syntax error
416 \ 32\ \-\ E2fsck canceled by user request
418 \ 128\ \-\ Shared library error
421 The following signals have the following effect when sent to
427 to start displaying a completion bar or emitting progress information.
428 (See discussion of the
435 to stop displaying a completion bar or emitting progress information.
437 Almost any piece of software will have bugs. If you manage to find a
438 filesystem which causes
442 is unable to repair, please report it to the author.
444 Please include as much information as possible in your bug report.
445 Ideally, include a complete transcript of the
447 run, so I can see exactly what error messages are displayed. (Make sure
448 the messages printed by
450 are in English; if your system has been
453 messages have been translated into another language, please set the the
455 environment variable to
457 so that the transcript of e2fsck's output will be useful to me.)
459 have a writable filesystem where the transcript can be stored, the
461 program is a handy way to save the output of
465 It is also useful to send the output of
467 If a specific inode or inodes seems to be giving
469 trouble, try running the
471 command and send the output of the
473 command run on the relevant inode(s). If the inode is a directory, the
476 command will allow you to extract the contents of the directory inode,
477 which can sent to me after being first run through
479 The most useful data you can send to help reproduce
480 the bug is a compressed raw image dump of the filesystem, generated using
484 man page for more details.
486 Always include the full version string which
488 displays when it is run, so I know which version you are running.
492 Determines the location of the configuration file (see
493 .BR e2fsck.conf (5)).
497 was written by Theodore Ts'o <tytso@mit.edu>.