of echo_client running on 1 or more nodes.
You just need to pass parameters case=network and
- server_nid="<name/nid_of_server>" to the script. The script will do the
+ targets="<hostname/ip_of_server>" to the script. The script will do the
required setup for network case.
3. The Stripe F/S over the Network.
-------
The script must be customised according to the components under test and
-where it should keep its working files. Customization variables are
-described clearly at Customization variables Section in the script.
+where it should keep its working files. Customization variables are
+described clearly at Customization variables Section in the script.
+Please see maximum suported value ranges for customization variables
+in the srcipt.
To run against a local disk:
---------------------------
Here the obdfilter instance names are oss01-sdb, oss01-sdd, oss02-sdi.
Since you are driving obdfilter instances directly, set the shell array
-variable 'ost_names' to the names of the obdfilter instances and leave
-'ECHO_CLIENTS' undefined.
+variable 'targets' to the names of the obdfilter instances.
+
Example:
-OSTS='oss01:oss01-sdb oss01:oss01-sdd oss02:oss02-sdi' \
+targets='oss01:oss01-sdb oss01:oss01-sdd oss02:oss02-sdi' \
./obdfilter-survey
-
To run against a network:
------------------------
For the second case i.e. obdfilter-survey over network, following setup
and server machine to avoid typing password.
1. Automated run:
To run obdfilter-surevy against network you just need to pass parameter
- case=netdisk and server_nid="<name/nid_of_server>" to the script.
+ case=netdisk and targets="<hostname/ip_of_server>" to the script.
-e.g. $ nobjhi=2 thrhi=2 size=1024 server_nid="<name/nid_of_server>" \
+e.g. $ nobjhi=2 thrhi=2 size=1024 targets="<hostname/ip_of_server>" \
case=network sh obdfilter-survey
On server side you can see the stats at :
- /proc/fs/lustre/obdecho/<ost-testfs>/ststs
-where, 'ost_testfs' is the obdecho server created through script.
+ /proc/fs/lustre/obdecho/<echo_srv>/stats
+where, 'echo_srv' is the obdecho server created through script.
NOTE: In network test only automated run is supported.
2. Manual run:
While running manually you need to tell the script all the names of the
echo_client instances, which should already be up and running.
-e.g. $ nobjhi=2 thrhi=2 size=1024 ECHO_CLIENTS="ECHO_<osc_name> ..." \
+e.g. $ nobjhi=2 thrhi=2 size=1024 targets="<osc_name> ..." \
sh obdfilter-survey
rmmod="/sbin/rmmod"
declare -a ost_names
+declare -a client_names
declare -a host_list
declare -a dev_list
declare -a unique_hosts
return 0
}
+# do cleanup for netdisk case.
+cleanup_netdisk () {
+ for osc in $@; do
+ lctl <<EOF
+ cfg_device $osc
+ cleanup
+ detach
+EOF
+ done
+}
+
+# do cleanup for network case.
+cleanup_network () {
+ local clean_srv_OSS=$1
+ lctl <<EOF
+ cfg_device echotmp
+ cleanup
+ detach
+EOF
+ remote_shell "root@$server_nid" "lctl << EOF
+ cfg_device echo_srv
+ cleanup
+ detach
+EOF"
+ if [ $clean_srv_OSS ]; then
+ remote_shell "root@$server_nid" "lctl << EOF
+ cfg_device OSS
+ cleanup
+ detach
+EOF"
+ fi
+}
+
# do cleanup and exit.
cleanup () {
- local clean_srv_OSS=$2
- for ((i = 0; i < ndevs; i++)); do
+ local exit_status=$1
+ shift
+ for ((i = 0; i < $ndevs; i++)); do
host=${host_names[$i]}
if [ -n ${do_teardown_ec[$i]} ]; then
teardown_ec_devno $host ${client_names[$i]}
fi
done
if [ $case == "network" ]; then
- lctl <<EOF
- cfg_device osc_testfs
- cleanup
- detach
-EOF
- remote_shell "root@$server_nid" "lctl << EOF
- cfg_device echo_srv
- cleanup
- detach
-EOF"
+ cleanup_network $1
fi
- if [ $clean_srv_OSS ]; then
- remote_shell "root@$server_nid" "lctl << EOF
- cfg_device OSS
- cleanup
- detach
-EOF"
+ if [ $case == "netdisk" ]; then
+ shift
+ cleanup_netdisk $@
fi
- if [ $1 ]; then
- if [ $1 -ne 0 ]; then
+ if [ $exit_status ]; then
+ if [ $exit_status -ne 0 ]; then
echo "program exited with error "
else
echo "done!"
else
echo "Terminated"
fi
- exit $1
+ exit $exit_status
}
trap cleanup SIGHUP SIGINT SIGTERM
echo "client and ost name both null" 1>&2
return
fi
- client_name=${ost_name}_echo_client
+ client_name=${ost_name}_ecc
fi
ec=`get_devno $host echo_client $client_name`
if [ -n "$ec" ]; then
echo "OST $ost_name not setup" 1>&2
return
fi
+ client_name=${ost_name}_ecc
remote_shell $host "$lctl <<EOF
attach echo_client $client_name ${client_name}_UUID
setup $ost_name
EOF"
ec=`get_devno $host echo_client $client_name`
if [ -z "$ec" ]; then
- echo "Can't setup echo client" 1>&2
+ echo "Can't setup echo-client" 1>&2
return
fi
echo $ec $client_name 1
# It creates echoclients for all osc listed using #lctl device_list command
ec_using_osc () {
local osc_name=$1
- local osc_uuid=$2
$lctl <<EOF
- attach echo_client ECHO_$osc_name $osc_uuid
- cfg_device ECHO_$osc_name
+ attach echo_client ${osc_name}_ecc ${osc_name}_ecc_UUID
+ cfg_device ${osc_name}_ecc
setup $osc_name
EOF
local server_nid=$1
local ocsname=$2
local oscuuid=$3
- $lctl add_uuid testfs_UUID $server_nid@tcp >/dev/null 2>&1
+ $lctl add_uuid echo_UUID $server_nid@tcp >/dev/null 2>&1
$lctl <<EOF
attach osc $ocsname $oscuuid
cfg_device $ocsname
- setup echo_srv_UUID testfs_UUID
+ setup echo_srv_UUID echo_UUID
EOF
$lctl <<EOF
- attach echo_client ECHO_$ocsname $oscuuid
+ attach echo_client ${ocsname}_ecc $oscuuid
setup $ocsname
EOF
}
+setup_osc_for_remote_ost () {
+ local ost_nid=$1
+ local obdfilter_name=$2
+ local host_name=host_$3
+ $lctl add_uuid ${host_name}_UUID $ost_nid@tcp >/dev/null 2>&1
+ $lctl <<EOF
+ attach osc ${obdfilter_name}_osc ${obdfilter_name}_osc_UUID
+ cfg_device ${obdfilter_name}_osc
+ setup ${obdfilter_name}_UUID ${host_name}_UUID
+EOF
+}
+
# setup obdecho on server
setup_srv_obd () {
local server_nid=$1
# added from bugzill req.
get_targets () {
if [ -z "$ost_names" ]; then
- OSTS=$($lctl device_list | awk "{if (\$2 == \"UP\" && \
+ targets=$($lctl device_list | awk "{if (\$2 == \"UP\" && \
\$3 == \"obdfilter\") {print \$4} }")
fi
- if [ -z "$OSTS" ]; then
- echo "Can't find any OSTs to test. Please set ost_names=..."
+ if [ -z "$targets" ]; then
+ echo "Can't find any OSTs to test. Please set targets=..."
exit 1
fi
count=0
- for name in $OSTS; do
+ for name in $targets; do
ost_names[$count]=$name
+ str=(`split_hostname $name`)
+ host_names[$count]=${str[0]}
count=$((count+1))
done
}
get_hosts () {
# split out hostnames from ost names
for ((i = 0; i < count; i++)); do
- str=(`split_hostname ${OSTS[$i]}`)
+ str=(`split_hostname ${targets[$i]}`)
host_list[$i]=${str[0]}
ost_names[$i]=${str[1]}
done
# How to run test:
# case 1 (local disk):
# $ nobjhi=2 thrhi=2 size=1024 case=disk sh obdfilter-survey
-# instead of case=disk one can also run test as follows
-# $ nobjhi=2 thrhi=2 size=1024 OSTS="lustre-OST0000 lustre-OST0001 ..." sh obdfilter-survey
+# one can also run test with user defined targets as follows,
+# $ nobjhi=2 thrhi=2 size=1024 targets="lustre-OST0000 lustre-OST0001 ..." sh obdfilter-survey
# case 2 (network):
-# $ nobjhi=2 thrhi=2 size=1024 server_nid="<name/nid_of_server>" case=network sh obdfilter-survey
-# where, server_nid is name or ip address of system, which you want to
+# $ nobjhi=2 thrhi=2 size=1024 targets="<name/ip_of_server>" case=network sh obdfilter-survey
+# where, targets is name or ip address of system, which you want to
# set as server.
# case 3 (network and disk):
# $ nobjhi=2 thrhi=2 size=1024 case=netdisk sh obdfilter-survey
-# instead of case="netdisk" one can also run test as follows
-# $ nobjhi=2 thrhi=2 size=1024 ECHO_CLIENTS="ECHO_<osc_name> ..." sh obdfilter-survey
+# one can also run test with user defined targets as follows,
+# $ nobjhi=2 thrhi=2 size=1024 targets="<osc_name> ..." sh obdfilter-survey
#[ NOTE: It is advised to have automated login (passwordless entry) between server and
# client systems on which this test runs.]
# and to make test startup/shutdown overhead insignificant
size=${size:-16384}
-# record size (KBytes)
+# record size (KBytes) ( 7168 max)
rszlo=${rszlo:-1024}
rszhi=${rszhi:-1024}
#####################################################################
# One can change variable values in this section as per requirements
-OSTS=${OSTS:-""}
-server_nid=${server_nid:-""}
+targets=${targets:-""}
case=${case:-"disk"}
-if [ -n "$OSTS" ]; then
+if [ -n "$targets" ]; then
declare -a ost_names
- count=0
- for name in $OSTS; do
- ost_names[$count]=$name
- count=$((count+1))
- done
-fi
-ECHO_CLIENTS=${ECHO_CLIENTS:-""}
-if [ -n "$ECHO_CLIENTS" ]; then
- # make sure we unset ost_names so that our client_names get noticed...
- unset ost_names
declare -a client_names
count=0
- for name in $ECHO_CLIENTS; do
- client_names[$count]=$name
+ for name in $targets; do
+ if [ $case == "disk" ]; then
+ ost_names[$count]=$name
+ else
+ client_names[$count]=$name
+ fi
count=$((count+1))
done
fi
-
# what tests to run (first must be write)
tests_str=${tests_str:-""}
if [ -n "$tests_str" ]; then
done
else
#tests=(write rewrite read reread rewrite_again)
- tests=(write rewrite read)
+ #tests=(write rewrite read)
+ tests=(write)
fi
# restart from here iff all are defined
# (to avoid lctl ENOMEM problems)
max_buffer_mem=$((1024 * 1024))
snap=1
-
+clean_srv_OSS=0
# Customisation variables ends here.
#####################################################################
# leave the rest of this alone unless you know what you're doing...
lctl=${lustre_root}/utils/lctl
fi
+# split out hostnames from client/ost names
+ndevs=0
+for trgt in $targets; do
+ str=(`split_hostname $trgt`)
+ host_names[$ndevs]=${str[0]}
+ client_names[$ndevs]=${str[1]}
+ ndevs=$((ndevs+1))
+done
+if [ $case == "netdisk" ]; then
+ if [ "$targets" ]; then
+ for ((i = 0; i < $ndevs; i++)); do
+ setup_osc_for_remote_ost ${host_names[$i]} ${client_names[$i]} $i
+ cleanup_oscs="$cleanup_oscs ${client_names[$i]}_osc"
+ host_names[$i]=localhost
+ done
+ fi
+ declare -a osc_names
+ declare -a osc_uuids
+ osc_names_str=$(lctl dl |grep osc | awk "{if (\$2 == \"UP\" && \$3 == \"osc\") {print \$4} }")
+ count=0;
+ for name in $osc_names_str; do
+ osc_names[$count]=$name
+ count=$((count+1))
+ done
+ osc_uuid_str=$(lctl dl |grep osc | awk "{if (\$2 == \"UP\" && \$3 == \"osc\") {print \$5} }")
+ count=0;
+ for uuid in $osc_uuid_str; do
+ osc_uuids[$count]=$uuid
+ count=$((count+1))
+ done
+ for (( i = 0; i < $count; i++ ))
+ do
+ ec_using_osc ${osc_names[$i]}
+ done
+ echo_clients=$(lctl dl | grep echo_client | awk "{if (\$2 == \"UP\" && \$3 == \"echo_client\") {print \$4} }")
+ cnt=0;
+ for name in $echo_clients; do
+ client_names[$cnt]=$name
+ host_names[$cnt]=localhost
+ cnt=$((cnt+1))
+ done
+ ndevs=${#client_names[@]}
+fi
if [ $case == "network" ]; then
+ server_nid=$targets
if [ -z "$server_nid" ]; then
- echo "Specify the server NID"
+ echo "Specify hostname or ip-address of server"
exit 1;
fi
# check for obdecho module on server
fi
# Now do the server setup
setup_srv_obd $server_nid "echo_srv"
- oss_on_srv=`dsh $server_nid root "lctl dl | grep OSS | awk '{ print $4 }'"`
- if [ ! $oss_on_srv ]; then
+ oss_on_srv=`dsh $server_nid root "lctl dl | grep OSS" | awk '{ print $4 }'`
+ if [ -z $oss_on_srv ]; then
setup_OSS $server_nid
clean_srv_OSS=1
fi
echo "The existing setup must be cleaned";
exit 0;
fi
- ec_using_srv_nid $server_nid "osc_testfs" "test_obdfs"
- declare -a client_names
- client_names[0]="ECHO_osc_testfs"
+ ec_using_srv_nid $server_nid "echotmp" "echotmp_UUID"
+ client_names[0]="echotmp_ecc"
fi
-
-if [ -z "$ECHO_CLIENTS" ]; then
- if [ $case == "netdisk" ]; then
- declare -a osc_names
- declare -a osc_uuids
- osc_names_str=$(lctl dl |grep osc | awk "{if (\$2 == \"UP\" && \$3 == \"osc\") {print \$4} }")
- count=0;
- for name in $osc_names_str; do
- osc_names[$count]=$name
- count=$((count+1))
- done
- osc_uuid_str=$(lctl dl |grep osc | awk "{if (\$2 == \"UP\" && \$3 == \"osc\") {print \$5} }")
- count=0;
- for uuid in $osc_uuid_str; do
- osc_uuids[$count]=$uuid
- count=$((count+1))
- done
- for (( i = 0 ; i < $count; i++ ))
- do
- ec_using_osc ${osc_names[$i]} ${osc_uuids[$i]}
- done
- ECHO_CLIENTS=$(lctl dl | grep echo_client | awk "{if (\$2 == \"UP\" && \$3 == \"echo_client\") {print \$4} }")
- cnt=0;
- for name in $ECHO_CLIENTS; do
- client_names[$cnt]=$name
- cnt=$((cnt+1))
- done
- fi
-fi
-
-if [ -z "$OSTS" ]; then
+if [ -z "$targets" ]; then
if [ $case == "disk" ]; then
- get_targets
+ get_targets
+ ndevs=${#ost_names[@]}
fi
fi
-
-# split out hostnames from client/ost names
-ndevs=${#client_names[@]}
-if ((ndevs != 0)); then
- if ((${#ost_names[@]} != 0)); then
- echo "Please specify client_names or ost_names, but not both" 1>&2
- exit 1
- fi
- for ((i = 0; i < ndevs; i++)); do
- str=(`split_hostname ${client_names[$i]}`)
- host_names[$i]=${str[0]}
- client_names[$i]=${str[1]}
- done
-else
- ndevs=${#ost_names[@]}
- if ((ndevs == 0)); then
- echo "Please specify either client_names or ost_names" 1>&2
- exit 1
- fi
- for ((i = 0; i < ndevs; i++)); do
- str=(`split_hostname ${ost_names[$i]}`)
- host_names[$i]=${str[0]}
- ost_names[$i]=${str[1]}
- done
-fi
-
# get vmstat started
# disable portals debug and get obdecho loaded on all relevant hosts
unique_hosts=(`unique ${host_names[@]}`)
echo "Can't load obdecho on $host" 1>&2
exit 1
done
-
# get all the echo_client device numbers and names
-for ((i=0; i < ndevs; i++)); do
+for ((i=0; i < $ndevs; i++)); do
host=${host_names[$i]}
devno=(`get_ec_devno $host "${client_names[$i]}" "${ost_names[$i]}"`)
if ((${#devno[@]} != 3)); then
client_names[$i]=${devno[1]}
do_teardown_ec[$i]=${devno[2]}
done
+if (($ndevs <= 0 || ${#host_names[@]} <= 0)); then
+ echo "no devices or hosts specified"
+ cleanup 0 $clean_srv_OSS $cleanup_oscs
+fi
print_summary "$(date) Obdfilter-survey for case=$case from $(hostname)"
for ((rsz = $rszlo; rsz <= $rszhi; rsz*=2)); do
for ((nobj = $nobjlo; nobj <= $nobjhi; nobj*=2)); do
fi
# create the objects
tmpf="${workf}_tmp"
- for ((idx = 0; idx < ndevs; idx++)); do
+ for ((idx = 0; idx < $ndevs; idx++)); do
host=${host_names[$idx]}
devno=${devnos[$idx]}
client_name="${host}:${client_names[$idx]}"
for host in ${unique_hosts[@]}; do
echo -n > ${cmdsf}_${host}
done
- for ((idx = 0; idx < ndevs; idx++)); do
+ for ((idx = 0; idx < $ndevs; idx++)); do
host=${host_names[$idx]}
devno=${devnos[$idx]}
tmpfi="${tmpf}_$idx"
print_summary -n "$str"
# collect/check individual OST stats
echo -n > $tmpf
- for ((idx = 0; idx < ndevs; idx++)); do
+ for ((idx = 0; idx < $ndevs; idx++)); do
client_name="${host_names[$idx]}:${client_names[$idx]}"
tmpfi="${tmpf}_$idx"
echo "=============> $test $client_name" >> $workf
done
print_summary ""
# destroy objects we created
- for ((idx = 0; idx < ndevs; idx++)); do
+ for ((idx = 0; idx < $ndevs; idx++)); do
host=${host_names[$idx]}
devno=${devnos[$idx]}
client_name="${host}:${client_names[$idx]}"
done
done
done
-cleanup 0 $clean_srv_OSS
+cleanup 0 $clean_srv_OSS $cleanup_oscs
exit 0