LU-2233 tests: improve tests sanityn/40-47

sanity/40-46 usually take 800-900s which is almost a half
of the whole sanityn pass. 99.(9)% of time the tests just
wait to ensure specific order the operations execute in.

the patch changes cfs_fail_timeout_set() so that it can
interrupt waiting if fail_loc is set to 0 - polling with
1/10s frequency is used.

the tests itself are modified to reset fail_loc. to be
able to do so both operations (referenced as OP1 and OP2
in the tests) are run in background. once started and then
ensured with pdo_sched() helper that MDS threads got to the
blocking points, we can interrupt OP1 and do usual checks.

ONLY=40-47 sh sanityn.sh take: 1017s before and 78s after.

Lustre-change: https://review.whamcloud.com/4392
Lustre-commit: 743b85a32e24cff0c77dff739691043970a0901e

LU-12470 tests: increase pdirops timeout

There are pretty regular failures of the sanityn pdirops test_40-47.
Increase the timeout slightly to reduces the frequency of failures.

Lustre-change: https://review.whamcloud.com/37304
Lustre-commit: b35f50c96c608ba650a5b3cf29fa129e01025549

Test-Parameters: trivial testlist=sanityn,sanityn,sanityn,sanityn
Test-Parameters: testlist=sanityn,sanityn,sanityn,sanityn,sanityn
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: Ib8aec2b4517a6f84402ccae66f6d5ceac6d73d85
Reviewed-on: https://review.whamcloud.com/44391
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>

diff --git a/libcfs/libcfs/fail.c b/libcfs/libcfs/fail.c
index 12addb2..a441a45 100644 (file)
--- a/libcfs/libcfs/fail.c
+++ b/libcfs/libcfs/fail.c
@@ -121,16 +121,23 @@ EXPORT_SYMBOL(__cfs_fail_check_set);
 
 int __cfs_fail_timeout_set(__u32 id, __u32 value, int ms, int set)
 {
+       ktime_t till = ktime_add_ms(ktime_get(), ms);
        int ret = 0;
 
        ret = __cfs_fail_check_set(id, value, set);
        if (ret && likely(ms > 0)) {
-               CERROR("cfs_fail_timeout id %x sleeping for %dms\n",
-                      id, ms);
-               set_current_state(TASK_UNINTERRUPTIBLE);
-               schedule_timeout(cfs_time_seconds(ms) / 1000);
-               set_current_state(TASK_RUNNING);
-               CERROR("cfs_fail_timeout id %x awake\n", id);
+               CERROR("cfs_fail_timeout id %x sleeping for %dms\n", id, ms);
+               while (ktime_before(ktime_get(), till)) {
+                       schedule_timeout_uninterruptible(cfs_time_seconds(1)
+                                                        / 10);
+                       set_current_state(TASK_RUNNING);
+                       if (!cfs_fail_loc) {
+                               CERROR("cfs_fail_timeout interrupted\n");
+                               break;
+                       }
+               }
+               if (cfs_fail_loc)
+                       CERROR("cfs_fail_timeout id %x awake\n", id);
        }
        return ret;
 }

diff --git a/lustre/tests/sanityn.sh b/lustre/tests/sanityn.sh
index 3e17f99..73c03c8 100755 (executable)
--- a/lustre/tests/sanityn.sh
+++ b/lustre/tests/sanityn.sh
@@ -1467,6 +1467,14 @@ test_39d() { # LU-7310
 }
 run_test 39d "sync write should update mtime"
 
+pdo_sched() {
+       # how long 40-47 take with specific delay
+       # sleep 0.1 # 78s
+       # sleep 0.2 # 103s
+       # sleep 0.3 # 124s
+       sleep 0.5 # 164s
+}
+
 # for pdo testing, we must cancel MDT-MDT locks as well as client locks to
 # avoid unexpected delays due to previous tests
 pdo_lru_clear() {
@@ -1484,7 +1492,7 @@ pdo_lru_clear() {
 check_pdo_conflict() {
        local pid=$1
        local conflict=0
-       sleep 1 # to ensure OP1 is finished on client if OP2 is blocked by OP1
+       pdo_sched # to ensure OP1 is finished on client if OP2 is blocked by OP1
        if [[ `ps --pid $pid | wc -l` == 1 ]]; then
                conflict=1
                echo "Conflict"
@@ -1503,8 +1511,7 @@ test_40a() {
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        touch $DIR2
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
+       PID1=$!; pdo_sched
        touch $DIR2/$tfile-2
        check_pdo_conflict $PID1 || error "create is blocked"
        mkdir $DIR2/$tfile-3
@@ -1521,6 +1528,7 @@ test_40a() {
 
        #  all operations above shouldn't wait the first one
        check_pdo_conflict $PID1 || error "parallel operation is blocked"
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        wait $PID1
        rm -rf $DIR/$tfile*
        return 0
@@ -1533,8 +1541,7 @@ test_40b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        touch $DIR1/$tfile &
-       PID1=$!
-       sleep 1
+       PID1=$!; pdo_sched
        # open|create
        touch $DIR2/$tfile-2
        check_pdo_conflict $PID1 || error "create is blocked"
@@ -1552,6 +1559,7 @@ test_40b() {
        # all operations above shouldn't wait the first one
 
         check_pdo_conflict $PID1 || error "parallel operation is blocked"
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        wait $PID1
        rm -rf $DIR/$tfile*
        return 0
@@ -1565,8 +1573,7 @@ test_40c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile $DIR1/$tfile-0 &
-       PID1=$!
-       sleep 1
+       PID1=$!; pdo_sched
        # open|create
        touch $DIR2/$tfile-2
        check_pdo_conflict $PID1 || error "create is blocked"
@@ -1584,6 +1591,7 @@ test_40c() {
 
         # all operations above shouldn't wait the first one
        check_pdo_conflict $PID1 || error "parallel operation is blocked"
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        wait $PID1
        rm -rf $DIR/$tfile*
        return 0
@@ -1597,8 +1605,7 @@ test_40d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
+       PID1=$!; pdo_sched
        # open|create
        touch $DIR2/$tfile-2
        check_pdo_conflict $PID1 || error "create is blocked"
@@ -1616,6 +1623,7 @@ test_40d() {
 
        # all operations above shouldn't wait the first one
        check_pdo_conflict $PID1 || error "parallel operation is blocked"
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        wait $PID1
        return 0
 }
@@ -1628,8 +1636,7 @@ test_40e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-0 &
-       PID1=$!
-       sleep 1
+       PID1=$!; pdo_sched
        # open|create
        touch $DIR2/$tfile-2
        check_pdo_conflict $PID1 || error "create is blocked"
@@ -1645,6 +1652,7 @@ test_40e() {
 
        # all operations above shouldn't wait the first one
        check_pdo_conflict $PID1 || error "parallel operation is blocked"
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        wait $PID1
        rm -rf $DIR/$tfile*
        return 0
@@ -1657,10 +1665,12 @@ test_41a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile && error "mkdir must fail"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; echo "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1671,10 +1681,12 @@ test_41b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1686,10 +1698,12 @@ test_41c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1700,10 +1714,12 @@ test_41d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       rm $DIR2/$tfile || error "unlink must succeed"
+       PID1=$! ; pdo_sched
+       rm $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1715,10 +1731,12 @@ test_41e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile-2 $DIR2/$tfile || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1729,10 +1747,12 @@ test_41f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-2 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1743,10 +1763,12 @@ test_41g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1757,10 +1779,12 @@ test_41h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1823,10 +1847,12 @@ test_42a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile && error "mkdir must fail"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1837,10 +1863,12 @@ test_42b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1852,10 +1880,12 @@ test_42c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1866,10 +1896,12 @@ test_42d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       rmdir $DIR2/$tfile || error "unlink must succeed"
+       PID1=$! ; pdo_sched
+       rmdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1881,10 +1913,12 @@ test_42e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv -T $DIR2/$tfile-2 $DIR2/$tfile && error "rename must fail"
+       PID1=$! ; pdo_sched
+       mv -T $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1895,10 +1929,12 @@ test_42f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-2 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1909,10 +1945,12 @@ test_42g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1923,10 +1961,12 @@ test_42h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mkdir $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1939,10 +1979,12 @@ test_43a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile || error "mkdir must succeed"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "mkdir must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1954,10 +1996,12 @@ test_43b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c || error "create must succeed"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "create must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1970,10 +2014,12 @@ test_43c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-2 $DIR2/$tfile || error "link must succeed"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "link must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -1985,10 +2031,12 @@ test_43d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       rm $DIR2/$tfile && error "unlink must fail"
+       PID1=$! ; pdo_sched
+       rm $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "unlink must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2001,10 +2049,12 @@ test_43e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv -u $DIR2/$tfile-2 $DIR2/$tfile || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv -u $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2016,10 +2066,12 @@ test_43f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-2 && error "rename must fail"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-2 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2031,10 +2083,12 @@ test_43g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null && error "stat must fail"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "stat must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2046,10 +2100,12 @@ test_43h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2062,11 +2118,13 @@ test_43i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        rm $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $LFS mkdir -i 1 $DIR2/$tfile || error "remote mkdir must succeed"
+       PID1=$! ; pdo_sched
+       $LFS mkdir -i 1 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 &&
                { wait $PID1; error "remote mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "remote mkdir must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2085,7 +2143,7 @@ sub_test_43k() {
        do_nodes $(comma_list $(mdts_nodes)) \
                "lctl set_param -n fail_loc=${fail_loc} || true" &>/dev/null
        echo content > $DIR1/$tdir/$tfile & PID1=$!
-       sleep 0.5
+       pdo_sched
        multiop $DIR2/$tdir/$tfile u & PID2=$!
 
        wait $PID1 ||
@@ -2135,10 +2193,13 @@ test_44a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2   0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile && error "mkdir must fail"
-       check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
+       check_pdo_conflict $PID1 && { wait $PID1; date;error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
+       date
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2150,10 +2211,12 @@ test_44b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2166,10 +2229,12 @@ test_44c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-3 $DIR2/$tfile && error "link must fail"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-3 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2181,10 +2246,12 @@ test_44d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       rm $DIR2/$tfile || error "unlink must succeed"
+       PID1=$! ; pdo_sched
+       rm $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2198,10 +2265,12 @@ test_44e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile-3 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2214,10 +2283,12 @@ test_44f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-3 || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-3 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2229,10 +2300,12 @@ test_44g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2244,10 +2317,12 @@ test_44h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2261,11 +2336,13 @@ test_44i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2   0x146
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
        mv $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $LFS mkdir -i 1 $DIR2/$tfile && error "remote mkdir must fail"
+       PID1=$! ; pdo_sched
+       $LFS mkdir -i 1 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                error "remote mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "remote mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2278,10 +2355,12 @@ test_45a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile || error "mkdir must succeed"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "mkdir must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2293,10 +2372,12 @@ test_45b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c || error "create must succeed"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "create must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2309,10 +2390,12 @@ test_45c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-3 $DIR2/$tfile || error "link must succeed"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-3 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "link must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2324,10 +2407,12 @@ test_45d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       rm $DIR2/$tfile && error "unlink must fail"
+       PID1=$! ; pdo_sched
+       rm $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "unlink must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2340,10 +2425,12 @@ test_45e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile-3 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2355,10 +2442,12 @@ test_45f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-3 && error "rename must fail"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-3 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2370,10 +2459,12 @@ test_45g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null && error "stat must fail"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "stat must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2385,10 +2476,11 @@ test_45h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2401,11 +2493,13 @@ test_45i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        mv $DIR1/$tfile $DIR1/$tfile-2 &
-       PID1=$!
-       sleep 1
-       $LFS mkdir -i 1 $DIR2/$tfile || error "create remote dir must succeed"
+       PID1=$! ; pdo_sched
+       $LFS mkdir -i 1 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                error "create remote dir isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "create remote dir must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2427,7 +2521,7 @@ sub_test_45j() {
 
        cat $DIR1/$tdir/$tfile >/dev/null &
        PID1=$!
-       sleep 0.5
+       pdo_sched
        mrename $DIR2/$tdir/$tfile-2 $DIR2/$tdir/$tfile > /dev/null &
        PID2=$!
 
@@ -2472,10 +2566,12 @@ test_46a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile && error "mkdir must fail"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2487,10 +2583,12 @@ test_46b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+       PID1=$! ; pdo_sched
+       $MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2502,10 +2600,12 @@ test_46c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile $DIR2/$tfile && error "link must fail"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2517,10 +2617,12 @@ test_46d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       rm $DIR2/$tfile || error "unlink must succeed"
+       PID1=$! ; pdo_sched
+       rm $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2533,10 +2635,12 @@ test_46e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile-3 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2549,10 +2653,12 @@ test_46f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-3 || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-3 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2564,10 +2670,12 @@ test_46g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2579,11 +2687,12 @@ test_46h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       ls -lia $DIR2/ > /dev/null
-       check_pdo_conflict $PID1 && { wait $PID1;
-                       error "readdir isn't blocked"; }
+       PID1=$! ; pdo_sched
+       ls -lia $DIR2/ > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
+       check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+       wait $PID2
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2596,11 +2705,13 @@ test_46i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        link $DIR1/$tfile-2 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       $LFS mkdir -i 1 $DIR2/$tfile && error "remote mkdir must fail"
+       PID1=$! ; pdo_sched
+       $LFS mkdir -i 1 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                error "remote mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "remote mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2613,10 +2724,12 @@ test_47a() {
        pdo_lru_clear
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mkdir $DIR2/$tfile && error "mkdir must fail"
+       PID1=$! ; pdo_sched
+       mkdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2628,11 +2741,13 @@ test_47b() {
        pdo_lru_clear
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       multiop $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+       PID1=$! ; pdo_sched
+       multiop $DIR2/$tfile oO_CREAT:O_EXCL:c &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                        error "create isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2645,10 +2760,12 @@ test_47c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+       PID1=$! ; pdo_sched
+       link $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2660,11 +2777,13 @@ test_47d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       rmdir $DIR2/$tfile || error "unlink must succeed"
+       PID1=$! ; pdo_sched
+       rmdir $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                        error "unlink isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rmdir must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2677,11 +2796,13 @@ test_47e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv -T $DIR2/$tfile-2 $DIR2/$tfile && error "rename must fail"
+       PID1=$! ; pdo_sched
+       mv -T $DIR2/$tfile-2 $DIR2/$tfile &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                        error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2693,11 +2814,13 @@ test_47f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 1
-       mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+       PID1=$! ; pdo_sched
+       mv $DIR2/$tfile $DIR2/$tfile-2 &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                        error "rename isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }
@@ -2711,11 +2834,13 @@ test_47g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
        do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
        $LFS mkdir -i 1 $DIR1/$tfile &
-       PID1=$!
-       sleep 2
-       stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+       PID1=$! ; pdo_sched
+       stat $DIR2/$tfile > /dev/null &
+       PID2=$! ; pdo_sched
+       do_facet $SINGLEMDS lctl set_param fail_loc=0
        check_pdo_conflict $PID1 && { wait $PID1;
                                        error "getattr isn't blocked"; }
+       wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
        rm -rf $DIR/$tfile*
        return 0
 }