3 # Declare rpmbuild --with/--without parameters
7 %bcond_without lustre_tests
8 %bcond_without lustre_utils
9 %bcond_without lustre_iokit
10 %bcond_without lustre_modules
13 %bcond_with gss_keyring
14 %bcond_without manpages
19 # By default both gss and gss keyring are disabled.
20 # gss keyring requires the gss core. If the builder
21 # request gss_keyring we must enable gss core even if
22 # the builder attempts to disable gss.
23 %if %{with gss_keyring}
27 %if %{without servers}
28 # --without servers overrides --with {ldiskfs|zfs}
29 # so undefine the internal variables set by bcond_*
30 %undefine with_ldiskfs
34 %{!?version: %global version @VERSION@}
35 %{!?kver: %global kver %(uname -r)}
36 %{!?kdir: %global kdir /lib/modules/%{kver}/source}
37 %{!?kobjdir: %global kobjdir %(if [ "%{kdir}" = "/lib/modules/%{kver}/source" ]; then echo "/lib/modules/%{kver}/build"; else echo "%{kdir}"; fi)}
39 # as an alternative to this implementation we could simply "make -C $kdir kernelversion"
40 %{!?kversion: %global kversion %(files="include/generated/utsrelease.h include/linux/utsrelease.h include/linux/version.h"; for f in $files; do if test -r %{kobjdir}/$f && grep UTS_RELEASE %{kobjdir}/$f >/dev/null; then sed -ne '/^#define UTS_RELEASE/s/.*"\\(.*\\)"$/\\1/p' %{kobjdir}/$f; break; fi; done)}
42 # We set this because kernel_module_package has its own method of identifying
43 # which kernel to build against, and it is unlikely that its decision will
44 # match with Lustre's method of selecting which kernel to build against.
45 # By setting this variable, we override kernel_module_package's kernel
46 # selection with our selection.
47 %{!?kernel_version: %global kernel_version %kversion}
49 # in order to get kernel symset and/or kernel module dependencies into
50 # the RPM, in order to support weak-modules, the internal dependency gen-
51 # erator needs to be disabled
52 # this is done with (reduce the double % down to a single %):
54 # %%global _use_internal_dependency_generator 0
56 # on SLES10, /usr/lib/rpm/macros already sets this, so no harm in also
57 # defining it here (until Suse changes their mind)
59 # on RHEL5, however, we do need to explicitly disable the internal dep-
60 # endency generator and allow the external one be used
61 # but since RedHat's kABI is only a subset of the total kernel ABI, it
62 # doesn't include all of the symbols we (or OFED for that matter) need
63 # until RedHat includes all of the symbols we need in their symsets we
64 # cannot support weak-modules
65 # we did e-mail the maintainer of all of this stuff @redhat but got no
67 #%%global _use_internal_dependency_generator 0
69 # Set the package name prefix
70 %if %{undefined lustre_name}
72 %global lustre_name lustre
74 %global lustre_name lustre-client
78 %if %{undefined kmoddir}
79 %if %{defined kernel_module_package_moddir}
80 %global kmoddir %{kernel_module_package_moddir}
82 %if %{defined suse_kernel_module_package}
83 %global kmoddir updates
90 %global modules_fs_path /lib/modules/%{kversion}/%{kmoddir}
92 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
93 %global requires_yaml_name libyaml
94 %global requires_kmod_name kmod-%{lustre_name}
95 %if %{with lustre_tests}
96 %global requires_kmod_tests_name kmod-%{lustre_name}-tests
98 %global requires_kmod_version %{version}
100 %global requires_yaml_name libyaml-0-2
101 %global requires_kmod_name %{lustre_name}-kmp
102 %if %{with lustre_tests}
103 %global requires_kmod_tests_name %{lustre_name}-tests-kmp
105 %define krequires %(echo %{kversion} | sed -e 's/\.x86_64$//' -e 's/\.i[3456]86$//' -e 's/-smp$//' -e 's/-bigsmp$//' -e 's/[-.]ppc64$//' -e 's/\.aarch64$//' -e 's/-default$//')
106 %if 0%{?suse_version} >= 1200
107 %global requires_kmod_version %{version}_k%(echo %{krequires} | sed -r 'y/-/_/; s/^(2\.6\.[0-9]+)_/\\1.0_/;')
109 %global requires_kmod_version %{version}_%(echo %{krequires} | sed -r 'y/-/_/; s/^(2\.6\.[0-9]+)_/\\1.0_/;')
113 # RHEL >= 7 comes with systemd
115 %define with_systemd 1
118 # Fedora >= 15 comes with systemd, but only >= 18 has
120 %if 0%{?fedora} >= 18
121 %define with_systemd 1
124 # opensuse >= 12.1 comes with systemd, but only >= 13.1
125 # has the proper macros
126 %if 0%{?suse_version} >= 1310
127 %define with_systemd 1
130 Summary: Lustre File System
135 Group: System Environment/Kernel
136 Source: lustre-%{version}.tar.gz
137 Source1: kmp-lustre.preamble
138 Source2: kmp-lustre.files
139 Source3: kmp-lustre-osd-ldiskfs.preamble
140 Source4: kmp-lustre-osd-ldiskfs.files
141 Source5: kmp-lustre-osd-zfs.preamble
142 Source6: kmp-lustre-osd-zfs.files
143 Source7: kmp-lustre-tests.files
144 URL: https://wiki.whamcloud.com/
145 BuildRoot: %{_tmppath}/lustre-%{version}-root
146 Requires: %{requires_kmod_name} = %{requires_kmod_version} zlib
147 Requires: %{requires_yaml_name}
148 BuildRequires: libtool libyaml-devel zlib-devel
151 Requires: lustre-osd-mount
152 Obsoletes: lustre-client < %{version}
153 Provides: lustre-client = %{version}-%{release}
155 # GSS requires this: BuildRequires: pkgconfig, libgssapi-devel >= 0.10
156 %if %{_vendor}=="redhat" || %{_vendor}=="fedora"
157 #suse don't support selinux
158 BuildRequires: libselinux-devel
161 %if %{with lustre_modules}
162 BuildRequires: %kernel_module_package_buildreqs
163 %if %{_vendor}=="redhat"
164 BuildRequires: redhat-rpm-config
169 Requires(post): systemd
170 Requires(preun): systemd
171 Requires(postun): systemd
172 BuildRequires: systemd
176 Userspace tools and files for the Lustre file system.
178 %if %{with lustre_modules}
180 # until we have achieved full kABI compatibility we need to
181 # restrict the kernel range that can be used to the kernel
182 # version from the RHEL minor release
183 # this is supposed to be done for kmods automatically but
184 # RHBZ#1467319 seems to be getting in the way
185 # this is true for el7.0 through el7.4
186 %define preamble %{expand:%(
188 cat %{SOURCE1} > $TMPFILE
190 linuxversion=${kver%%%%-*}
191 linuxrelease=${kver##*-}
192 kabiminor=${linuxrelease%%%%.*}
193 echo "Requires: kernel < $linuxversion-$((kabiminor+1)), kernel >= $linuxversion-$((kabiminor))" >> $TMPFILE
197 %define preamble %{SOURCE1}
199 %kernel_module_package -n %{name} -p %preamble -f %SOURCE2 default
202 %kernel_module_package -n %{name}-osd-ldiskfs -p %SOURCE3 -f %SOURCE4 default
203 %if %{with lustre_utils}
204 %package osd-ldiskfs-mount
205 Summary: osd-ldiskfs-mount contains mount's ldiskfs specific dso.
206 Provides: lustre-osd-mount = %{version}
207 Group: System Environment/Kernel
209 %description osd-ldiskfs-mount
210 LDISKFS hooks for mount/mkfs into a dynamic library.
212 %endif # with lustre_utils
213 %endif # with ldiskfs
216 %kernel_module_package -n %{name}-osd-zfs -p %SOURCE5 -f %SOURCE6 default
217 %if %{with lustre_utils}
218 %package osd-zfs-mount
219 Summary: osd-zfs-mount contains mount's zfs specific dso.
220 Provides: lustre-osd-mount = %{version}
221 Group: System Environment/Kernel
223 %description osd-zfs-mount
224 ZFS hooks for mount/mkfs into a dynamic library.
226 %endif # with lustre_utils
229 %endif # with lustre_modules
232 %package resource-agents
233 Summary: HA Resuable Cluster Resource Scripts for Lustre
234 Group: System Environment/Base
236 Requires: resource-agents
238 %description resource-agents
239 A set of scripts to operate Lustre resources in a High Availablity
240 environment for both Pacemaker and rgmanager.
243 %if %{with lustre_tests}
245 Summary: Lustre testing framework
246 Group: System Environment/Kernel
247 Provides: %{name}-tests = %{version}
248 %if %{with lustre_iokit}
249 Requires: %{name} = %{version}, lustre-iokit
251 Requires: %{name} = %{version}
253 Requires: %{requires_kmod_name} = %{requires_kmod_version}
254 Requires: %{requires_kmod_tests_name} = %{requires_kmod_version}
255 Requires: attr, rsync, perl, lsof, libtool, /usr/bin/getconf
258 This package contains a set of test binaries and scripts that are intended
259 to be used by the Lustre testing framework.
261 %if %{with lustre_modules}
262 %kernel_module_package -n %{name}-tests -f %SOURCE7 default
266 %if %{with lustre_iokit}
267 %package -n lustre-iokit
268 Summary: The Lustre IO-Kit is a collection of benchmark tools for a cluster with the Lustre file system.
269 Group: Applications/System
270 Requires: python2 > 2.2, sg3_utils
272 %description -n lustre-iokit
273 This package includes five tools:
275 A test of the 'bare metal' performance, bypassing as much of the kernel as we can. Uses the sgp_dd utility.
278 This survey can be run in 3 modes to test disk I/O including the filesystem,
279 network I/O, and disk I/O via the network. The script does sequential I/O
280 with varying numbers of threads and objects (files) by using lctl::test_brw
281 to drive the echo_client connected to local or remote obdfilter instances,
282 or remote obdecho instances.
285 This survey tests the client-to-disk performance of individual OSTs, and
286 ranks then for comparison.
289 This script will collect IO stats on a defined set of nodes.
292 A script to run the IOR benchmark. The latest version can be downloaded from
293 http://www.llnl.gov/asci/purple/benchmarks/limited/ior/
296 This survey tests the local metadata performance using the echo_client to drive
297 the MDD layer to perform operations. It is run with multiple threads (to
298 simulate MDT service threads) locally on the MDS node, and does not need Lustre
299 clients in order to run
302 %if 0%{?suse_version}
306 %setup -qn lustre-%{version}
307 ln lustre/ChangeLog ChangeLog-lustre
308 ln lnet/ChangeLog ChangeLog-lnet
311 # Set an explicit path to our Linux tree, if we can.
312 cd $RPM_BUILD_DIR/lustre-%{version}
314 # Store the CFLAGS and LDFLAGS that would normally be used in the UTILS_CFLAGS
315 # and UTILS_LDFLAGS environment variables so that we use can them when compiling
316 # the user-space code in lustre/utils and lnet/utils. As of RHEL 8.0, the
317 # __global_* variants are deprecated in favour of build_cflags, etc. If neither
318 # style is available (e.g. on SLES), then these just end up as empty strings.
319 export UTILS_CFLAGS="%{?build_cflags:%{build_cflags}}%{!?build_cflags:%{?__global_cflags:%{__global_cflags}}}"
320 export UTILS_LDFLAGS="%{?build_ldflags:%{build_ldflags}}%{!?build_ldflags:%{?__global_ldflags:%{__global_ldflags}}}"
322 # RHEL7 on PPC64 needs __SANE_USERSPACE_TYPES__ defined so that __s64 and __u64
323 # are presented to user-land as long long instead of long long. Without this it
324 # will fail the format check whenever such a variable is printed.
327 export UTILS_CFLAGS="${UTILS_CFLAGS} -D__SANE_USERSPACE_TYPES__=1"
331 # Disable any hardening or annotation since this doesn't make sense for
332 # kernel code, and reset %optflags so that the vendor's overzealous flags don't
333 # create build failures.
334 %define optflags -g -O2 -Werror
335 %undefine _annotated_build
336 %undefine _hardened_build
338 CONFIGURE_ARGS="%{?configure_args}"
339 if [ -n "$CONFIGURE_ARGS" ]; then
340 # make sure %%kdir and %%kobjdir are not in the configure arguments
341 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux=[^ ][^ ]* \?//')
342 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-linux-obj=[^ ][^ ]* \?//')
343 # remove --with-kmp-moddir from configure arguments,
344 # it will be set --with-kmp-moddir=%%kmoddir
345 CONFIGURE_ARGS=$(echo $CONFIGURE_ARGS | sed -e 's/"\?--with-kmp-moddir=[^ ][^ ]* \?//')
348 # we need to eval "configure" because $CONFIGURE_ARGS could have a quoted
349 # string in it which we don't want word splitted by the shell
350 # also remove (build|host|target) options because they will be specified
351 # inside $CONFIGURE_ARGS
352 # kmod tools/scripts require %{name} directory with kernel modules
353 %define eval_configure %(echo '%configure' | sed -e 's#\./configure#eval ./configure#' -e 's/--\\(build\\|host\\|target\\)=[^ ][^ ]* //g')
355 %eval_configure $CONFIGURE_ARGS \
356 %{?with_lustre_tests:--enable-tests}%{!?with_lustre_tests:--disable-tests} \
357 %{?with_lustre_utils:--enable-utils}%{!?with_lustre_utils:--disable-utils} \
358 %{?with_lustre_modules:--enable-modules}%{!?with_lustre_modules:--disable-modules} \
359 %{!?with_shared:--disable-shared} \
360 %{!?with_static:--disable-static} \
361 %{!?with_lustre_iokit:--disable-iokit} \
362 %{!?with_ldiskfs:--disable-ldiskfs} \
363 %{!?with_servers:--disable-server} \
364 %{!?with_zfs:--without-zfs} \
365 %{!?with_snmp:--disable-snmp} \
366 %{!?with_gss:--disable-gss} \
367 %{!?with_gss_keyring:--disable-gss-keyring} \
368 %{!?with_manpages:--disable-manpages} \
369 %{!?with_systemd:--with-systemdsystemunitdir=no} \
370 %{?with_systemd:--with-systemdsystemunitdir=%{_unitdir}} \
371 --with-linux=%{kdir} \
372 --with-linux-obj=%{kobjdir} \
373 --with-kmp-moddir=%{kmoddir}/%{name}
375 make %{?_smp_mflags} -s %{?make_args}
378 make install DESTDIR=$RPM_BUILD_ROOT
380 # RHEL's kernel_module_path macro expects that all the modules
381 # in a kmod package will be in modules_fs_path/<sub packagename>
382 # but Lustre installs all of the modules in a single pass into
383 # a shared location. Since this is a restriction imposed by
384 # RHEL, we handle this here in the spec file rather than in
385 # Lustre's build system. This is not expected to bother SLES's
386 # kernel_module_path macro.
387 basemodpath=$RPM_BUILD_ROOT%{modules_fs_path}/%{lustre_name}
389 mkdir -p $basemodpath-osd-ldiskfs/fs
390 mv $basemodpath/fs/osd_ldiskfs.ko $basemodpath-osd-ldiskfs/fs/osd_ldiskfs.ko
391 mv $basemodpath/fs/ldiskfs.ko $basemodpath-osd-ldiskfs/fs/ldiskfs.ko
394 mkdir -p $basemodpath-osd-zfs/fs
395 mv $basemodpath/fs/osd_zfs.ko $basemodpath-osd-zfs/fs/osd_zfs.ko
397 %if %{with lustre_tests}
398 mkdir -p $basemodpath-tests/fs
399 mv $basemodpath/fs/llog_test.ko $basemodpath-tests/fs/llog_test.ko
400 mkdir -p $RPM_BUILD_ROOT%{_libdir}/lustre/tests/kernel/
401 mv $basemodpath/fs/kinode.ko $RPM_BUILD_ROOT%{_libdir}/lustre/tests/kernel/
406 %if %{with servers} && %{with lustre_utils}
407 # The .ha_v2 extension identifies the heartbeat resource agent as using
408 # legacy syntax. Install a compatibility symlink to avoid conflicts when
409 # newer-style agents are added.
410 ln -s Lustre.ha_v2 $RPM_BUILD_ROOT%{_sysconfdir}/ha.d/resource.d/Lustre
411 echo '%{_sysconfdir}/ha.d/resource.d/Lustre.ha_v2' >>lustre.files
412 echo '%{_sysconfdir}/ha.d/resource.d/Lustre' >>lustre.files
415 # systemd is on redhat, fedora, and suse
417 echo '%{_unitdir}/lnet.service' >>lustre.files
420 %if %{_vendor}=="redhat"
421 # The following scripts are Red Hat specific
423 echo '%{_sysconfdir}/init.d/lustre' >>lustre.files
424 echo '%{_sysconfdir}/sysconfig/lustre' >>lustre.files
425 %if %{with gss_keyring}
426 echo '%{_sysconfdir}/init.d/lsvcgss' >>lustre.files
427 echo '%config(noreplace) %{_sysconfdir}/sysconfig/lsvcgss' >>lustre.files
431 %if %{without systemd}
432 echo '%{_sysconfdir}/init.d/lnet' >>lustre.files
435 %if %{with gss_keyring}
436 echo '%config(noreplace) %{_sysconfdir}/request-key.d/lgssc.conf' >>lustre.files
439 # fc18 needs 'x' permission for library files
440 find $RPM_BUILD_ROOT -name \*.so -type f -exec chmod +x {} \;
442 rm -f $RPM_BUILD_ROOT%{_libdir}/liblnetconfig.la
444 echo '%attr(-, root, root) %{_libdir}/liblnetconfig.a' >>lustre.files
447 echo '%attr(-, root, root) %{_libdir}/liblnetconfig.so' >>lustre.files
448 echo '%attr(-, root, root) %{_libdir}/liblnetconfig.so.*' >>lustre.files
452 echo '%{_libdir}/libiam.a' >>lustre.files
456 mkdir -p $RPM_BUILD_ROOT/%{_libdir}/lustre/snmp
457 echo '%{_libdir}/lustre/snmp' >>lustre.files
460 %if %{with lustre_utils}
461 mkdir -p $RPM_BUILD_ROOT/%{_datadir}/lustre
462 if [ -d $RPM_BUILD_ROOT%{_libdir}/lustre ] ; then
463 find $RPM_BUILD_ROOT%{_libdir}/@PACKAGE@ -name \*.la -type f -exec rm -f {} \;
467 %if %{with lustre_modules}
468 # mark modules executable for find-debuginfo.sh
469 find $RPM_BUILD_ROOT/lib/modules -name \*.ko -type f -exec chmod u+x {} \;
472 rm -f $RPM_BUILD_ROOT%{_libdir}/liblustreapi.la
474 %if %{with lustre_tests}
475 :> lustre-tests.files
476 echo '%{_libdir}/lustre/tests/*' >>lustre-tests.files
477 echo '%{_bindir}/mcreate' >>lustre-tests.files
478 echo '%{_bindir}/munlink' >>lustre-tests.files
479 echo '%{_sbindir}/wirecheck' >>lustre-tests.files
480 echo '%{_sbindir}/wiretest' >>lustre-tests.files
481 %if %{_vendor}=="redhat"
482 if [ -n "@MPI_BIN@" ]; then
483 echo '@MPI_BIN@/*' >>lustre-tests.files
488 %files -f lustre.files
489 %defattr(-,root,root)
491 %if %{with lustre_tests}
492 %exclude %{_sbindir}/wirecheck
493 %exclude %{_sbindir}/wiretest
496 %exclude %{_sbindir}/zfsobj2fid
498 %if %{with lustre_utils}
500 %{_libexecdir}/lustre/lc_common
501 %{_libexecdir}/lustre/haconfig
502 %{_bindir}/lustre_req_history
507 %{_bindir}/plot-llstat
510 %{_bindir}/lfs_migrate
513 %{_libdir}/liblustreapi.a
516 %{_libdir}/liblustreapi.so*
522 %{_includedir}/lustre
523 %{_includedir}/linux/lnet
524 %{_includedir}/linux/lustre
526 %{_sysconfdir}/udev/rules.d/99-lustre.rules
528 %{_sysconfdir}/udev/rules.d/99-lustre-server.rules
531 %config(noreplace) %{_sysconfdir}/ldev.conf
533 %config(noreplace) %{_sysconfdir}/lnet.conf
534 %config(noreplace) %{_sysconfdir}/modprobe.d/ko2iblnd.conf
535 %if %{with lustre_utils}
536 %config(noreplace) %{_sysconfdir}/lnet_routes.conf
538 %if %{with lustre_modules}
542 %if %{with lustre_utils}
543 %files osd-ldiskfs-mount
544 %defattr(-,root,root)
545 %{_libdir}/@PACKAGE@/mount_osd_ldiskfs.so
552 %if %{with lustre_utils}
554 %defattr(-,root,root)
555 %{_libdir}/@PACKAGE@/mount_osd_zfs.so
556 %{_sysconfdir}/zfs/zed.d/*
561 %endif # with lustre_modules
564 %files resource-agents
565 %defattr(0755,root,root)
566 %{_prefix}/lib/ocf/resource.d/lustre/
569 %if %{with lustre_tests}
570 %files tests -f lustre-tests.files
571 %defattr(-,root,root)
574 %if %{with lustre_iokit}
575 %files -n lustre-iokit
576 %defattr(-, root, root)
577 %{_bindir}/iokit-config
578 %{_bindir}/iokit-gather-stats
579 %{_bindir}/iokit-libecho
580 %{_bindir}/iokit-lstats
581 %{_bindir}/iokit-parse-ior
582 %{_bindir}/iokit-plot-obdfilter
583 %{_bindir}/iokit-plot-ost
584 %{_bindir}/iokit-plot-sgpdd
585 %{_bindir}/ior-survey
586 %{_bindir}/mds-survey
587 %{_bindir}/obdfilter-survey
588 %{_bindir}/ost-survey
589 %{_bindir}/sgpdd-survey
590 %doc lustre-iokit/ior-survey/README.ior-survey
591 %doc lustre-iokit/mds-survey/README.mds-survey
592 %doc lustre-iokit/obdfilter-survey/README.obdfilter-survey
593 %doc lustre-iokit/ost-survey/README.ost-survey
594 %doc lustre-iokit/sgpdd-survey/README.sgpdd-survey
595 %doc lustre-iokit/stats-collect/README.iokit-lstats
600 %systemd_post lnet.service
605 %systemd_preun lnet.service
610 %systemd_postun_with_restart lnet.service
614 rm -rf $RPM_BUILD_ROOT
615 rm -rf %{_tmppath}/kmp