1 /* -*- mode: c; c-basic-offset: 8; indent-tabs-mode: nil; -*-
2 * vim:expandtab:shiftwidth=8:tabstop=8:
6 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 only,
10 * as published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License version 2 for more details (a copy is included
16 * in the LICENSE file that accompanied this code).
18 * You should have received a copy of the GNU General Public License
19 * version 2 along with this program; If not, see
20 * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf
22 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
23 * CA 95054 USA or visit www.sun.com if you need additional information or
29 * Copyright (c) 2002, 2010, Oracle and/or its affiliates. All rights reserved.
30 * Use is subject to license terms.
33 * This file is part of Lustre, http://www.lustre.org/
34 * Lustre is a trademark of Sun Microsystems, Inc.
38 * Author: Peter J. Braam <braam@clusterfs.com>
39 * Author: Phil Schwan <phil@clusterfs.com>
40 * Author: Robert Read <rread@clusterfs.com>
45 #include <lnet/lnetctl.h>
49 static int jt_quit(int argc, char **argv) {
50 Parser_quit(argc, argv);
54 static int jt_noop(int argc, char **argv) {
58 static int jt_opt_ignore_errors(int argc, char **argv) {
59 Parser_ignore_errors(1);
63 command_t cmdlist[] = {
65 {"===== metacommands =======", jt_noop, 0, "metacommands"},
66 {"--device", jt_opt_device, 0,
67 "run <command> after connecting to device <devno>\n"
68 "--device <devno> <command [args ...]>"},
69 {"--ignore_errors", jt_opt_ignore_errors, 0,
70 "ignore errors that occur during script processing\n"
72 {"ignore_errors", jt_opt_ignore_errors, 0,
73 "ignore errors that occur during script processing\n"
76 /* User interface commands */
77 {"======== control =========", jt_noop, 0, "control commands"},
78 {"help", Parser_help, 0, "help"},
79 {"lustre_build_version", jt_get_version, 0,
80 "print the build version of lustre\n"
81 "usage: lustre_build_version"},
82 {"exit", jt_quit, 0, "quit"},
83 {"quit", jt_quit, 0, "quit"},
85 /* Network configuration commands */
86 {"===== network config =====", jt_noop, 0, "network config"},
87 {"--net", jt_opt_net, 0,"run <command> after setting network to <net>\n"
88 "usage: --net <tcp/elan/gm/...> <command>"},
89 {"network", jt_ptl_network, 0, "configure LNET"
90 "usage: network up|down"},
91 {"net", jt_ptl_network, 0, "configure LNET"
92 "usage: net up|down"},
93 {"list_nids", jt_ptl_list_nids, 0, "list local NIDs"
94 "usage: list_nids [all]"},
95 {"which_nid", jt_ptl_which_nid, 0, "choose a NID"
96 "usage: which_nid NID [NID...]"},
97 {"interface_list", jt_ptl_print_interfaces,0,"print interface entries\n"
98 "usage: interface_list"},
99 {"peer_list", jt_ptl_print_peers, 0, "print peer entries\n"
101 {"conn_list", jt_ptl_print_connections, 0,
102 "print all the connected remote nid\n"
104 {"active_tx", jt_ptl_print_active_txs, 0, "print active transmits\n"
106 {"route_list", jt_ptl_print_routes, 0,
107 "print the portals routing table, same as show_route\n"
108 "usage: route_list"},
109 {"show_route", jt_ptl_print_routes, 0,
110 "print the portals routing table, same as route_list\n"
111 "usage: show_route"},
112 {"ping", jt_ptl_ping, 0, "Check LNET connectivity\n"
113 "usage: ping nid [timeout] [pid]"},
115 /* Device selection commands */
116 {"==== obd device selection ====", jt_noop, 0, "device selection"},
117 {"device", jt_obd_device, 0,
118 "set current device to <name|devno>\n"
119 "usage: device <%name|$name|devno>"},
120 {"device_list", jt_obd_list, 0, "show all devices\n"
121 "usage: device_list"},
122 {"dl", jt_obd_list, 0, "show all devices\n"
125 /* Device operations */
126 {"==== obd device operations ===", jt_noop, 0, "device operations"},
127 {"activate", jt_obd_activate, 0, "activate an import\n"},
128 {"deactivate", jt_obd_deactivate, 0, "deactivate an import. "
129 "This command should be used on failed OSC devices in an MDT LOV.\n"},
130 {"abort_recovery", jt_obd_abort_recovery, 0,
131 "abort recovery on a restarting MDT or OST device\n"},
132 {"set_timeout", jt_lcfg_set_timeout, 0,
133 "usage: conf_param obd_timeout=<secs>\n"},
134 {"conf_param", jt_lcfg_mgsparam, 0,"set a permanent config parameter.\n"
135 "This command must be run on the MGS node\n"
136 "usage: conf_param [-d] <target.keyword=val>\n"
137 " -d Remove the permanent setting."},
138 {"local_param", jt_lcfg_param, 0, "set a temporary, local param\n"
139 "usage: local_param <target.keyword=val>\n"},
140 {"get_param", jt_lcfg_getparam, 0, "get the Lustre or LNET parameter\n"
141 "usage: get_param [-n | -N | -F] <param_path1 param_path2 ...> \n"
142 "Get the value of Lustre or LNET parameter from the specified path.\n"
143 "The path can contain shell-style filename patterns.\n"
144 " -n Print only the value and not parameter name.\n"
145 " -N Print only matched parameter names and not the values.\n"
146 " (Especially useful when using patterns.)\n"
147 " -F When -N specified, add '/', '@' or '=' for directories,\n"
148 " symlinks and writeable files, respectively."},
149 {"set_param", jt_lcfg_setparam, 0, "set the Lustre or LNET parameter\n"
150 "usage: set_param [-n] <param_path1=value1 param_path2 value2 ...>\n"
151 "Set the value of the Lustre or LNET parameter at the specified path\n"
152 " -n Disable printing of the key name when printing values."},
153 {"list_param", jt_lcfg_listparam, 0,
154 "list the Lustre or LNET parameter name\n"
155 "usage: list_param [-FR] <param_path1 param_path2 ...>\n"
156 "List the name of Lustre or LNET parameter from the specified path.\n"
157 " -F Add '/', '@' or '=' for dirs, symlinks and writeable files,\n"
159 " -R Recursively list all parameters under the specified path.\n"},
162 {"==== debugging control ===", jt_noop, 0, "debug"},
163 {"debug_daemon", jt_dbg_debug_daemon, 0,
164 "debug daemon control and dump to a file\n"
165 "usage: debug_daemon {start file [#MB]|stop}"},
166 {"debug_kernel", jt_dbg_debug_kernel, 0,
167 "get debug buffer and dump to a file, same as dk\n"
168 "usage: debug_kernel [file] [raw]"},
169 {"dk", jt_dbg_debug_kernel, 0,
170 "get debug buffer and dump to a file, same as debug_kernel\n"
171 "usage: dk [file] [raw]"},
172 {"debug_file", jt_dbg_debug_file, 0,
173 "convert a binary debug file dumped by the kernel to ASCII text\n"
174 "usage: debug_file <input> [output]"},
175 {"df", jt_dbg_debug_file, 0,
176 "read debug buffer from input and dump to output, same as debug_file\n"
177 "usage: df <input> [output]"},
178 {"clear", jt_dbg_clear_debug_buf, 0, "clear kernel debug buffer\n"
180 {"mark", jt_dbg_mark_debug_buf, 0,
181 "insert marker text in kernel debug buffer\n"
182 "usage: mark <text>"},
183 {"filter", jt_dbg_filter, 0, "filter message type\n"
184 "usage: filter <subsystem id/debug mask>"},
185 {"show", jt_dbg_show, 0, "Show specific type of messages\n"
186 "usage: show <subsystem id/debug mask>"},
187 {"debug_list", jt_dbg_list, 0, "list subsystem and debug types\n"
188 "usage: debug_list <subs/types>"},
189 {"modules", jt_dbg_modules, 0,
190 "provide gdb-friendly module information\n"
191 "usage: modules <path>"},
193 /* Device configuration commands */
194 {"== obd device setup (these are not normally used post 1.4) ==",
195 jt_noop, 0, "device config"},
196 {"attach", jt_lcfg_attach, 0,
197 "set the type, name, and uuid of the current device\n"
198 "usage: attach type name uuid"},
199 {"detach", jt_obd_detach, 0,
200 "remove driver (and name and uuid) from current device\n"
202 {"setup", jt_lcfg_setup, 0,
203 "type specific device configuration information\n"
204 "usage: setup <args...>"},
205 {"cleanup", jt_obd_cleanup, 0, "cleanup previously setup device\n"
206 "usage: cleanup [force | failover]"},
207 {"dump_cfg", jt_cfg_dump_log, 0,
208 "print log of recorded commands for this config to kernel debug log\n"
209 "usage: dump_cfg config-uuid-name"},
211 /* virtual block operations */
212 {"==== virtual block device ====", jt_noop, 0, "virtual block device"},
213 {"blockdev_attach", jt_blockdev_attach, 0,
214 "attach a lustre regular file to a virtual block device\n"
215 "usage: blockdev_attach <file_name> <device_name>"},
216 {"blockdev_detach", jt_blockdev_detach, 0,
217 "detach a lustre regular file from a virtual block device\n"
218 "usage: blockdev_detach <device_name>"},
219 {"blockdev_info", jt_blockdev_info, 0,
220 "get the device info of a attached file\n"
221 "usage: blockdev_info <device_name>"},
224 {"=== Pools ==", jt_noop, 0, "pool management"},
225 {"pool_new", jt_pool_cmd, 0,
227 "usage pool_new <fsname>.<poolname>"},
228 {"pool_add", jt_pool_cmd, 0,
229 "add the named OSTs to the pool\n"
230 "usage pool_add <fsname>.<poolname> <ostname indexed list>"},
231 {"pool_remove", jt_pool_cmd, 0,
232 "remove the named OST from the pool\n"
233 "usage pool_remove <fsname>.<poolname> <ostname indexed list>"},
234 {"pool_destroy", jt_pool_cmd, 0,
236 "usage pool_destroy <fsname>.<poolname>"},
237 {"pool_list", jt_pool_cmd, 0,
238 "list pools and pools members\n"
239 "usage pool_list <fsname>[.<poolname>] | <pathname>"},
241 /* Test only commands */
242 {"==== testing (DANGEROUS) ====", jt_noop, 0, "testing (DANGEROUS)"},
243 {"--threads", jt_opt_threads, 0,
244 "run <threads> separate instances of <command> on device <devno>\n"
245 "--threads <threads> <verbose> <devno> <command [args ...]>"},
246 {"lookup", jt_obd_mdc_lookup, 0, "report file mode info\n"
247 "usage: lookup <directory> <file>"},
248 {"readonly", jt_obd_set_readonly, 0,
249 "disable writes to the underlying device\n"},
250 {"notransno", jt_obd_no_transno, 0,
251 "disable sending of committed-transno updates\n"},
252 {"add_uuid", jt_lcfg_add_uuid, 0, "associate a UUID with a nid\n"
253 "usage: add_uuid <uuid> <nid>"},
254 {"del_uuid", jt_lcfg_del_uuid, 0, "delete a UUID association\n"
255 "usage: del_uuid <uuid>"},
256 {"add_peer", jt_ptl_add_peer, 0, "add an peer entry\n"
257 "usage: add_peer <nid> <host> <port>"},
258 {"del_peer", jt_ptl_del_peer, 0, "remove an peer entry\n"
259 "usage: del_peer [<nid>] [<ipaddr|pid>]"},
260 {"add_conn ", jt_lcfg_add_conn, 0,
261 "usage: add_conn <conn_uuid> [priority]\n"},
262 {"del_conn ", jt_lcfg_del_conn, 0,
263 "usage: del_conn <conn_uuid> \n"},
264 {"disconnect", jt_ptl_disconnect, 0, "disconnect from a remote nid\n"
265 "usage: disconnect [<nid>]"},
266 {"mynid", jt_ptl_mynid, 0, "inform the socknal of the local nid. "
267 "The nid defaults to hostname for tcp networks and is automatically "
268 "setup for elan/myrinet networks.\n"
269 "usage: mynid [<nid>]"},
270 {"fail", jt_ptl_fail_nid, 0, "fail/restore communications.\n"
271 "Omitting the count means indefinitely, 0 means restore, "
272 "otherwise fail 'count' messages.\n"
273 "usage: fail nid|_all_ [count]"},
274 {"getattr", jt_obd_getattr, 0,
275 "get attribute for OST object <objid>\n"
276 "usage: getattr <objid>"},
277 {"setattr", jt_obd_setattr, 0,
278 "set mode attribute for OST object <objid>\n"
279 "usage: setattr <objid> <mode>"},
280 {"create", jt_obd_create, 0,
281 "create <num> OST objects (with <mode>)\n"
282 "usage: create [num [mode [verbose [lsm data]]]]"},
283 {"destroy", jt_obd_destroy, 0,
284 "destroy OST object <objid> [num [verbose]]\n"
285 "usage: destroy <num> objects, starting at objid <objid>"},
286 {"test_getattr", jt_obd_test_getattr, 0,
287 "do <num> getattrs (on OST object <objid> (objid+1 on each thread))\n"
288 "usage: test_getattr <num> [verbose [[t]objid]]"},
289 {"test_setattr", jt_obd_test_setattr, 0,
290 "do <num> setattrs (on OST object <objid> (objid+1 on each thread))\n"
291 "usage: test_setattr <num> [verbose [[t]objid]]"},
292 {"test_brw", jt_obd_test_brw, 0,
293 "do <num> bulk read/writes (<npages> per I/O, on OST object <objid>)\n"
294 "usage: test_brw [t]<num> [write [verbose [npages [[t]objid]]]]"},
295 {"lwt", jt_ptl_lwt, 0,
296 "light-weight tracing\n"
299 {"memhog", jt_ptl_memhog, 0,
300 "memory pressure testing\n"
301 "usage: memhog <page count> [<gfp flags>]"},
302 {"getobjversion", jt_get_obj_version, 0,
303 "get the version of an object on servers\n"
304 "usage: getobjversion <fid>"},
306 {"==== obsolete (DANGEROUS) ====", jt_noop, 0, "obsolete (DANGEROUS)"},
307 /* some test scripts still use these */
308 {"cfg_device", jt_obd_device, 0,
309 "set current device to <name>\n"
310 "usage: device <name>"},
311 {"recover", jt_obd_recover, 0,
312 "try to restore a lost connection immediately\n"
313 "usage: recover [MDC/OSC device]"},
314 /* saving for sanity 44a */
315 {"lov_getconfig", jt_obd_lov_getconfig, 0,
316 "read lov configuration from an mds device\n"
317 "usage: lov_getconfig <mountpoint>"},
318 /* Llog operations */
319 {"llog_catlist", jt_llog_catlist, 0,
320 "list all catalog logs on current device.\n"
321 "usage: llog_catlist"},
322 {"llog_info", jt_llog_info, 0,
323 "print log header information.\n"
324 "usage: llog_info <$logname|#oid#ogr#ogen>\n"
325 " oid, ogr and ogen are hexadecimal."},
326 {"llog_print", jt_llog_print, 0,
327 "print log content information.\n"
328 "usage: llog_print <$logname|#oid#ogr#ogen> [from] [to]\n"
329 " oid, ogr and ogen are hexadecimal.\n"
330 " print all records from index 1 by default."},
331 {"llog_check", jt_llog_check, 0,
332 "print log content information.\n"
333 "usage: llog_check <$logname|#oid#ogr#ogen> [from] [to]\n"
334 " oid, ogr and ogen are hexadecimal.\n"
335 " check all records from index 1 by default."},
336 {"llog_cancel", jt_llog_cancel, 0,
337 "cancel one record in log.\n"
338 "usage: llog_cancel <catalog id|catalog name> <log id> <index>"},
339 {"llog_remove", jt_llog_remove, 0,
340 "remove one log from catalog, erase it from disk.\n"
341 "usage: llog_remove <catalog id|catalog name> <log id>"},
342 /* network operations */
343 {"add_interface", jt_ptl_add_interface, 0, "add interface entry\n"
344 "usage: add_interface ip [netmask]"},
345 {"del_interface", jt_ptl_del_interface, 0, "del interface entry\n"
346 "usage: del_interface [ip]"},
347 {"add_route", jt_ptl_add_route, 0,
348 "add an entry to the portals routing table\n"
349 "usage: add_route <gateway> <target> [<target>]"},
350 {"del_route", jt_ptl_del_route, 0,
351 "delete route via gateway to targets from the portals routing table\n"
352 "usage: del_route <gateway> [<target>] [<target>]"},
353 {"set_route", jt_ptl_notify_router, 0,
354 "enable/disable routes via gateway in the portals routing table\n"
355 "usage: set_route <gateway> <up/down> [<time>]"},
360 int lctl_main(int argc, char **argv)
366 ptl_initialize(argc, argv);
367 if (obd_initialize(argc, argv) < 0)
369 if (dbg_initialize(argc, argv) < 0)
372 Parser_init("lctl > ", cmdlist);
375 rc = Parser_execarg(argc - 1, argv + 1, cmdlist);
377 rc = Parser_commands();
380 obd_finalize(argc, argv);
381 return rc < 0 ? -rc : rc;
384 #ifndef LIBLUSTRE_TEST
385 int main (int argc, char **argv)
387 return (lctl_main (argc, argv));