7 # bug number for skipped test:
8 ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
9 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
13 if [ -r /etc/SuSE-release ]
15 local vers=$(grep VERSION /etc/SuSE-release | awk '{print $3}')
16 local patchlev=$(grep PATCHLEVEL /etc/SuSE-release |
18 if [ $vers -eq 11 ] && [ $patchlev -eq 2 ]
26 if is_sles11; then # LU-2181
27 ALWAYS_EXCEPT="$ALWAYS_EXCEPT 23a 34b"
30 if [ "$FAILURE_MODE" = "HARD" ]; then
31 CONFIG_EXCEPTIONS="24a " &&
32 echo "Except the tests: $CONFIG_EXCEPTIONS for " \
33 "FAILURE_MODE=$FAILURE_MODE, b=23573" &&
34 ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
37 # bug number for skipped test:
38 # a tool to create lustre filesystem images
39 ALWAYS_EXCEPT="32newtarball $ALWAYS_EXCEPT"
42 PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
44 PTLDEBUG=${PTLDEBUG:--1}
46 LUSTRE=${LUSTRE:-$(dirname $0)/..}
47 RLUSTRE=${RLUSTRE:-$LUSTRE}
48 export MULTIOP=${MULTIOP:-multiop}
50 . $LUSTRE/tests/test-framework.sh
52 . ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
54 # use small MDS + OST size to speed formatting time
55 # do not use too small MDSSIZE/OSTSIZE, which affect the default jouranl size
56 # STORED_MDSSIZE is used in test_18
57 STORED_MDSSIZE=$MDSSIZE
58 STORED_OSTSIZE=$OSTSIZE
70 if ! combined_mgs_mds; then
71 # bug number for skipped test: 23954
72 ALWAYS_EXCEPT="$ALWAYS_EXCEPT 24b"
75 # pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
76 if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
77 LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
80 [ $(facet_fstype $SINGLEMDS) = "zfs" ] &&
81 # bug number for skipped test: LU-2778 LU-4444
82 ALWAYS_EXCEPT="$ALWAYS_EXCEPT 57b 69"
87 require_dsh_mds || exit 0
88 require_dsh_ost || exit 0
90 [ "$SLOW" = "no" ] && EXCEPT_SLOW="30a 31 45 69"
95 # The MGS must be started before the OSTs for a new fs, so start
96 # and stop to generate the startup logs.
99 wait_osc_import_state mds ost FULL
104 reformat_and_config() {
106 if ! combined_mgs_mds ; then
112 writeconf_or_reformat() {
113 # There are at most 2 OSTs for write_conf test
114 # who knows if/where $TUNEFS is installed?
115 # Better reformat if it fails...
116 writeconf_all $MDSCOUNT 2 ||
117 { echo "tunefs failed, reformatting instead" &&
118 reformat_and_config && return 0; }
128 start mgs $(mgsdevname) $MGS_MOUNT_OPTS
134 local dev=$(mdsdevname $num)
137 echo "start mds service on `facet_active_host $facet`"
138 start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
144 local dev=$(mdsdevname $num)
147 echo "stop mds service on `facet_active_host $facet`"
148 # These tests all use non-failover stop
149 stop $facet -f || return 97
155 for num in $(seq $MDSCOUNT); do
156 start_mdt $num $@ || return 94
161 if ! combined_mgs_mds ; then
169 for num in $(seq $MDSCOUNT); do
170 stop_mdt $num || return 97
175 echo "stop mgs service on `facet_active_host mgs`"
176 # These tests all use non-failover stop
177 stop mgs -f || return 97
181 echo "start ost1 service on `facet_active_host ost1`"
182 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS $@ || return 95
186 echo "stop ost1 service on `facet_active_host ost1`"
187 # These tests all use non-failover stop
188 stop ost1 -f || return 98
192 echo "start ost2 service on `facet_active_host ost2`"
193 start ost2 $(ostdevname 2) $OST_MOUNT_OPTS $@ || return 92
197 echo "stop ost2 service on `facet_active_host ost2`"
198 # These tests all use non-failover stop
199 stop ost2 -f || return 93
204 echo "mount $FSNAME on ${MOUNTPATH}....."
205 zconf_mount $(hostname) $MOUNTPATH || return 96
209 local mountopt="remount,$1"
211 echo "remount '$1' lustre on ${MOUNTPATH}....."
212 zconf_mount $(hostname) $MOUNTPATH "$mountopt" || return 96
217 echo "umount lustre on ${MOUNTPATH}....."
218 zconf_umount $(hostname) $MOUNTPATH || return 97
221 manual_umount_client(){
224 echo "manual umount lustre on ${MOUNT}...."
225 do_facet client "umount -d ${FORCE} $MOUNT"
231 start_mds || error "MDT start failed"
232 start_ost || error "Unable to start OST1"
233 mount_client $MOUNT || error "client start failed"
234 client_up || error "client_up failed"
243 unload_modules_conf () {
244 if combined_mgs_mds || ! local_mode; then
245 unload_modules || return 1
250 stop_ost || return 202
251 stop_mds || return 201
252 unload_modules_conf || return 203
256 umount_client $MOUNT || return 200
257 cleanup_nocli || return $?
262 echo "umount $MOUNT2 ..."
263 umount $MOUNT2 || true
264 echo "stopping fs2mds ..."
265 stop fs2mds -f || true
266 echo "stopping fs2ost ..."
267 stop fs2ost -f || true
271 do_facet client "cp /etc/passwd $DIR/a" || return 71
272 do_facet client "rm $DIR/a" || return 72
273 # make sure lustre is actually mounted (touch will block,
274 # but grep won't, so do it after)
275 do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
276 echo "setup single mount lustre success"
280 do_facet client "touch $DIR/a" || return 71
281 do_facet client "rm $DIR/a" || return 72
282 do_facet client "touch $DIR2/a" || return 73
283 do_facet client "rm $DIR2/a" || return 74
284 echo "setup double mount lustre success"
289 if [ "$ONLY" == "setup" ]; then
294 if [ "$ONLY" == "cleanup" ]; then
301 #create single point mountpoint
307 check_mount || error "check_mount failed"
308 cleanup || error "cleanup failed with $?"
310 run_test 0 "single mount setup"
313 start_mds || error "MDS start failed"
314 start_ost || error "unable to start OST"
315 echo "start ost second time..."
316 start_ost && error "2nd OST start should fail"
317 mount_client $MOUNT || error "client start failed"
318 check_mount || error "check_mount failed"
319 cleanup || error "cleanup failed with $?"
321 run_test 1 "start up ost twice (should return errors)"
324 start_mdt 1 || error "MDT0 start fail"
325 echo "start mds second time.."
326 start_mdt 1 && error "2nd MDT start should fail"
327 start_ost || error "OST start failed"
328 mount_client $MOUNT || error "mount_client failed to start client"
329 check_mount || error "check_mount failed"
330 cleanup || error "cleanup failed with $?"
332 run_test 2 "start up mds twice (should return err)"
336 #mount.lustre returns an error if already in mtab
337 mount_client $MOUNT && error "2nd client mount should fail"
338 check_mount || error "check_mount failed"
339 cleanup || error "cleanup failed with $?"
341 run_test 3 "mount client twice (should return err)"
345 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
346 stop_ost || error "Unable to stop OST1"
349 # ok for ost to fail shutdown
350 if [ 202 -ne $eno ] && [ 0 -ne $eno ]; then
351 error "cleanup failed with $?"
354 run_test 4 "force cleanup ost, then cleanup"
356 test_5a() { # was test_5
358 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
359 fuser -m -v $MOUNT && echo "$MOUNT is in use by user space process."
361 stop_mds || error "Unable to stop MDS"
363 # cleanup may return an error from the failed
364 # disconnects; for now I'll consider this successful
365 # if all the modules have unloaded.
369 echo "killing umount"
370 kill -TERM $UMOUNT_PID
371 echo "waiting for umount to finish"
373 if grep " $MOUNT " /proc/mounts; then
374 echo "test 5: /proc/mounts after failed umount"
378 echo "killing umount"
379 kill -TERM $UMOUNT_PID
380 echo "waiting for umount to finish"
382 grep " $MOUNT " /proc/mounts &&
383 error "/proc/mounts after second umount"
386 # manual_mount_client may fail due to umount succeeding above
388 # stop_mds is a no-op here, and should not fail
389 cleanup_nocli || error "cleanup_nocli failed with $?"
390 # df may have lingering entry
392 # mtab may have lingering entry
396 while [ "$WAIT" -ne "$MAX_WAIT" ]; do
398 grep -q $MOUNT" " /etc/mtab || break
399 echo "Waiting /etc/mtab updated ... "
400 WAIT=$(( WAIT + sleep))
402 [ "$WAIT" -eq "$MAX_WAIT" ] &&
403 error "/etc/mtab is not updated in $WAIT secs"
404 echo "/etc/mtab updated in $WAIT secs"
406 run_test 5a "force cleanup mds, then cleanup"
414 grep " $MOUNT " /etc/mtab &&
415 error false "unexpected entry in mtab before mount" && return 10
417 start_ost || error "OST start failed"
418 if ! combined_mgs_mds ; then
419 trap cleanup_5b EXIT ERR
420 start_mds || error "MDS start failed"
424 mount_client $MOUNT && error "mount_client $MOUNT should fail"
425 grep " $MOUNT " /etc/mtab &&
426 error "$MOUNT entry in mtab after failed mount"
428 # stop_mds is a no-op here, and should not fail
429 cleanup_nocli || error "cleanup_nocli failed with $?"
430 if ! combined_mgs_mds ; then
434 run_test 5b "Try to start a client with no MGS (should return errs)"
437 grep " $MOUNT " /etc/mtab &&
438 error false "unexpected entry in mtab before mount" && return 10
440 start_mds || error "MDS start failed"
441 start_ost || error "OST start failed"
442 local oldfs="${FSNAME}"
443 FSNAME="wrong.${FSNAME}"
444 mount_client $MOUNT || :
446 grep " $MOUNT " /etc/mtab &&
447 error "$MOUNT entry in mtab after failed mount"
449 cleanup_nocli || error "cleanup_nocli failed with $?"
451 run_test 5c "cleanup after failed mount (bug 2712) (should return errs)"
454 grep " $MOUNT " /etc/mtab &&
455 error false "unexpected entry in mtab before mount" && return 10
457 start_ost || error "OST start failed"
458 start_mds || error "MDS start failed"
459 stop_ost || error "Unable to stop OST1"
460 mount_client $MOUNT || error "mount_client $MOUNT failed"
461 cleanup || error "cleanup_nocli failed with $?"
462 grep " $MOUNT " /etc/mtab &&
463 error "$MOUNT entry in mtab after unmount"
466 run_test 5d "mount with ost down"
469 grep " $MOUNT " /etc/mtab &&
470 error false "unexpected entry in mtab before mount" && return 10
472 start_mds || error "MDS start failed"
473 start_ost || error "OST start failed"
475 #define OBD_FAIL_PTLRPC_DELAY_SEND 0x506
476 do_facet client "$LCTL set_param fail_loc=0x80000506"
477 mount_client $MOUNT || echo "mount failed (not fatal)"
478 cleanup || error "cleanup failed with $?"
479 grep " $MOUNT " /etc/mtab &&
480 error "$MOUNT entry in mtab after unmount"
483 run_test 5e "delayed connect, don't crash (bug 10268)"
486 if combined_mgs_mds ; then
487 skip "combined mgs and mds"
491 grep " $MOUNT " /etc/mtab &&
492 error false "unexpected entry in mtab before mount" && return 10
495 start_ost || error "OST start failed"
496 mount_client $MOUNT &
498 echo client_mount pid is $pid
502 if ! ps -f -p $pid >/dev/null; then
505 grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
506 error "mount returns $rc, expected to hang"
508 cleanup || error "cleanup failed with $?"
513 start_mds || error "start MDS failed"
515 # mount should succeed after start mds
517 grep " $MOUNT " /etc/mtab && echo "test 5f: mtab after mount"
518 cleanup || error "final call to cleanup failed with rc $?"
520 run_test 5f "mds down, cleanup after failed mount (bug 2712)"
525 mount_client $MOUNT || error "mount_client $MOUNT failed"
526 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
527 cleanup || error "cleanup failed with rc $?"
529 run_test 6 "manual umount, then mount again"
534 cleanup_nocli || error "cleanup_nocli failed with $?"
536 run_test 7 "manual umount, then cleanup"
540 mount_client $MOUNT2 || error "mount_client $MOUNT2 failed"
541 check_mount2 || error "check_mount2 failed"
542 umount_client $MOUNT2 || error "umount_client $MOUNT2 failed"
543 cleanup || error "cleanup failed with rc $?"
545 run_test 8 "double mount setup"
548 start_ost || error "OST start failed"
550 do_facet ost1 $LCTL set_param debug=\'inode trace\' ||
551 error "do_facet ost1 set_param inode trace failed."
552 do_facet ost1 $LCTL set_param subsystem_debug=\'mds ost\' ||
553 error "do_facet ost1 set_param debug mds ost failed."
555 CHECK_PTLDEBUG="`do_facet ost1 $LCTL get_param -n debug`"
556 if [ "$CHECK_PTLDEBUG" ] && { \
557 [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
558 [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
559 echo "lnet.debug success"
561 error "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
563 CHECK_SUBSYS="`do_facet ost1 $LCTL get_param -n subsystem_debug`"
564 if [ "$CHECK_SUBSYS" ] && [ "$CHECK_SUBSYS" = "mds ost" ]; then
565 echo "lnet.subsystem_debug success"
567 error "lnet.subsystem_debug: want 'mds ost' got '$CHECK_SUBSYS'"
569 stop_ost || error "Unable to stop OST1"
571 run_test 9 "test ptldebug and subsystem for mkfs"
579 do_facet $facet "test -b $dev" || rc=1
580 if [[ "$size" ]]; then
581 local in=$(do_facet $facet "dd if=$dev of=/dev/null bs=1k \
582 count=1 skip=$size 2>&1" |
583 awk '($3 == "in") { print $1 }')
584 [[ $in = "1+0" ]] || rc=1
590 # Test 16 was to "verify that lustre will correct the mode of OBJECTS".
591 # But with new MDS stack we don't care about the mode of local objects
592 # anymore, so this test is removed. See bug 22944 for more details.
596 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
597 skip "Only applicable to ldiskfs-based MDTs"
602 check_mount || error "check_mount failed"
603 cleanup || error "cleanup failed with rc $?"
605 echo "Remove mds config log"
606 if ! combined_mgs_mds ; then
610 do_facet mgs "$DEBUGFS -w -R 'unlink CONFIGS/$FSNAME-MDT0000' \
611 $(mgsdevname) || return \$?" ||
612 error "do_facet mgs failed with $?"
614 if ! combined_mgs_mds ; then
618 start_ost || error "OST start failed"
619 start_mds && error "MDS start succeeded, but should fail"
622 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
625 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
626 skip "Only applicable to ldiskfs-based MDTs"
630 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
635 # check if current MDSSIZE is large enough
636 [ $MDSSIZE -ge $MIN ] && OK=1 && myMDSSIZE=$MDSSIZE &&
637 log "use MDSSIZE=$MDSSIZE"
639 # check if the global config has a large enough MDSSIZE
640 [ -z "$OK" -a ! -z "$STORED_MDSSIZE" ] &&
641 [ $STORED_MDSSIZE -ge $MIN ] &&
642 OK=1 && myMDSSIZE=$STORED_MDSSIZE &&
643 log "use STORED_MDSSIZE=$STORED_MDSSIZE"
645 # check if the block device is large enough
646 is_blkdev $SINGLEMDS $MDSDEV $MIN
647 local large_enough=$?
648 if [ -n "$OK" ]; then
649 [ $large_enough -ne 0 ] && OK=""
651 [ $large_enough -eq 0 ] && OK=1 && myMDSSIZE=$MIN &&
652 log "use device $MDSDEV with MIN=$MIN"
655 # check if a loopback device has enough space for fs metadata (5%)
657 if [ -z "$OK" ]; then
658 local SPACE=$(do_facet $SINGLEMDS "[ -f $MDSDEV -o ! \
659 -e $MDSDEV ] && df -P \\\$(dirname $MDSDEV)" |
660 awk '($1 != "Filesystem") { print $4 }')
661 ! [ -z "$SPACE" ] && [ $SPACE -gt $((MIN / 20)) ] &&
662 OK=1 && myMDSSIZE=$MIN &&
663 log "use file $MDSDEV with MIN=$MIN"
666 [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
668 echo "mount mds with large journal..."
670 local OLD_MDSSIZE=$MDSSIZE
674 echo "mount lustre system..."
676 check_mount || error "check_mount failed"
678 echo "check journal size..."
679 local FOUNDSIZE=$(do_facet $SINGLEMDS "$DEBUGFS -c -R 'stat <8>' $MDSDEV" | awk '/Size: / { print $NF; exit;}')
680 if [ $FOUNDSIZE -gt $((32 * 1024 * 1024)) ]; then
681 log "Success: mkfs creates large journals. Size: $((FOUNDSIZE >> 20))M"
683 error "expected journal size > 32M, found $((FOUNDSIZE >> 20))M"
686 cleanup || error "cleanup failed with rc $?"
691 run_test 18 "check mkfs creates large journals"
694 start_mds || error "MDS start failed"
695 stop_mds || error "Unable to stop MDS"
697 run_test 19a "start/stop MDS without OSTs"
700 start_ost || error "Unable to start OST1"
701 stop_ost || error "Unable to stop OST1"
703 run_test 19b "start/stop OSTs without MDS"
706 # first format the ost/mdt
707 start_mds || error "MDS start failed"
708 start_ost || error "Unable to start OST1"
709 mount_client $MOUNT || error "mount_client $MOUNT failed"
710 check_mount || error "check_mount failed"
711 rm -f $DIR/$tfile || error "remove $DIR/$tfile failed."
712 remount_client ro $MOUNT || error "remount_client with ro failed"
713 touch $DIR/$tfile && error "$DIR/$tfile created incorrectly"
714 [ -e $DIR/$tfile ] && error "$DIR/$tfile exists incorrectly"
715 remount_client rw $MOUNT || error "remount_client with rw failed"
716 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
717 MCNT=$(grep -c $MOUNT /etc/mtab)
718 [ "$MCNT" -ne 1 ] && error "$MOUNT in /etc/mtab $MCNT times"
720 stop_mds || error "Unable to stop MDS"
721 stop_ost || error "Unable to stop OST1"
723 run_test 20 "remount ro,rw mounts work and doesn't break /etc/mtab"
726 start_mds || error "MDS start failed"
727 start_ost || error "unable to start OST1"
728 wait_osc_import_state mds ost FULL
729 stop_ost || error "unable to stop OST1"
730 stop_mds || error "unable to stop MDS"
732 run_test 21a "start mds before ost, stop ost first"
735 start_ost || error "unable to start OST1"
736 start_mds || error "MDS start failed"
737 wait_osc_import_state mds ost FULL
738 stop_mds || error "unable to stop MDS"
739 stop_ost || error "unable to stop OST1"
741 run_test 21b "start ost before mds, stop mds first"
744 start_ost || error "Unable to start OST1"
745 start_mds || error "MDS start failed"
746 start_ost2 || error "Unable to start OST2"
747 wait_osc_import_state mds ost2 FULL
748 stop_ost || error "Unable to stop OST1"
749 stop_ost2 || error "Unable to stop OST2"
750 stop_mds || error "Unable to stop MDS"
751 #writeconf to remove all ost2 traces for subsequent tests
752 writeconf_or_reformat
754 run_test 21c "start mds between two osts, stop mds last"
757 if combined_mgs_mds ; then
758 skip "need separate mgs device" && return 0
764 start_mgs || error "unable to start MGS"
765 start_ost || error "unable to start OST1"
766 start_ost2 || error "unable to start OST2"
767 start_mds || error "MDS start failed"
768 wait_osc_import_state mds ost2 FULL
770 stop_ost || error "Unable to stop OST1"
771 stop_ost2 || error "Unable to stop OST2"
772 stop_mds || error "Unable to stop MDS"
774 #writeconf to remove all ost2 traces for subsequent tests
775 writeconf_or_reformat
776 start_mgs || error "unable to start MGS"
778 run_test 21d "start mgs then ost and then mds"
781 MGSNID="$saved_mgsnid"
783 echo "stopping fs2mgs ..."
784 stop $fs2mgs -f || true
787 test_21e() { # LU-5863
788 if [[ -z "$fs3ost_DEV" || -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
789 is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
790 skip_env "mixed loopback and real device not working" && return
793 local fs2mdsdev=$(mdsdevname 1_2)
794 local fs2ostdev=$(ostdevname 1_2)
795 local fs3ostdev=$(ostdevname 2_2)
797 local fs2mdsvdev=$(mdsvdevname 1_2)
798 local fs2ostvdev=$(ostvdevname 1_2)
799 local fs3ostvdev=$(ostvdevname 2_2)
801 # temporarily use fs3ost as fs2mgs
803 local fs2mgsdev=$fs3ostdev
804 local fs2mgsvdev=$fs3ostvdev
806 local fsname=test1234
808 add $fs2mgs $(mkfs_opts mgs $fs2mgsdev) --fsname=$fsname \
809 --reformat $fs2mgsdev $fs2mgsvdev || error "add fs2mgs failed"
810 start $fs2mgs $fs2mgsdev $MGS_MOUNT_OPTS && trap cleanup_21e EXIT INT ||
811 error "start fs2mgs failed"
813 local saved_mgsnid="$MGSNID"
814 MGSNID=$(do_facet $fs2mgs $LCTL list_nids | xargs | tr ' ' ,)
816 add fs2mds $(mkfs_opts mds1 $fs2mdsdev $fsname) \
817 --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
818 add fs2ost $(mkfs_opts ost1 $fs2ostdev $fsname) \
819 --reformat $fs2ostdev $fs2ostvdev || error "add fs2ost failed"
821 start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
822 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS || error "start fs2mds failed"
824 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
825 $MOUNT_CMD $MGSNID:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
826 DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
830 run_test 21e "separate MGS and MDS"
833 start_mds || error "MDS start failed"
835 echo "Client mount with ost in logs, but none running"
836 start_ost || error "unable to start OST1"
837 # wait until mds connected to ost and open client connection
838 wait_osc_import_state mds ost FULL
839 stop_ost || error "unable to stop OST1"
840 mount_client $MOUNT || error "mount_client $MOUNT failed"
841 # check_mount will block trying to contact ost
842 mcreate $DIR/$tfile || error "mcreate $DIR/$tfile failed"
843 rm -f $DIR/$tfile || error "remove $DIR/$tfile failed"
847 echo "Client mount with a running ost"
848 start_ost || error "unable to start OST1"
850 # if gss enabled, wait full time to let connection from
851 # mds to ost be established, due to the mismatch between
852 # initial connect timeout and gss context negotiation timeout.
853 # This perhaps could be remove after AT landed.
854 echo "sleep $((TIMEOUT + TIMEOUT + TIMEOUT))s"
855 sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
857 mount_client $MOUNT || error "mount_client $MOUNT failed"
858 wait_osc_import_state mds ost FULL
859 wait_osc_import_state client ost FULL
860 check_mount || error "check_mount failed"
863 cleanup || error "cleanup failed with rc $?"
865 run_test 22 "start a client before osts (should return errs)"
867 test_23a() { # was test_23
870 stop $SINGLEMDS || error "failed to stop $SINGLEMDS"
871 # force down client so that recovering mds waits for reconnect
872 local running=$(grep -c $MOUNT /proc/mounts) || true
873 if [ $running -ne 0 ]; then
874 echo "Stopping client $MOUNT (opts: -f)"
878 # enter recovery on failed mds
879 local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
880 start $SINGLEMDS $MDT_DEV $MDS_MOUNT_OPTS || error "MDS start failed"
881 # try to start a new client
882 mount_client $MOUNT &
884 MOUNT_PID=$(ps -ef | grep "t lustre" | grep -v grep | awk '{print $2}')
885 MOUNT_LUSTRE_PID=$(ps -ef | grep mount.lustre |
886 grep -v grep | awk '{print $2}')
887 echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
889 ps --ppid $MOUNT_LUSTRE_PID
890 echo "waiting for mount to finish"
892 # "ctrl-c" sends SIGINT but it usually (in script) does not work on child process
893 # SIGTERM works but it does not spread to offspring processses
894 kill -s TERM $MOUNT_PID
895 kill -s TERM $MOUNT_LUSTRE_PID
896 # we can not wait $MOUNT_PID because it is not a child of this shell
902 while [ "$WAIT" -lt "$MAX_WAIT" ]; do
904 PID1=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_PID)
905 PID2=$(ps -ef | awk '{print $2}' | grep -w $MOUNT_LUSTRE_PID)
908 [ -z "$PID1" -a -z "$PID2" ] && break
909 echo "waiting for mount to finish ... "
910 WAIT=$(( WAIT + sleep))
912 if [ "$WAIT" -eq "$MAX_WAIT" ]; then
913 error "MOUNT_PID $MOUNT_PID and "\
914 "MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
917 stop_mds || error "stopping MDSes failed"
918 stop_ost || error "stopping OSSes failed"
920 run_test 23a "interrupt client during recovery mount delay"
925 test_23b() { # was test_23
926 start_mds || error "MDS start failed"
927 start_ost || error "Unable to start OST1"
928 # Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
929 $LCTL set_param fail_loc=0x80000313
931 cleanup || error "cleanup failed with rc $?"
933 run_test 23b "Simulate -EINTR during mount"
936 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
938 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
939 is_blkdev $SINGLEMDS $MDSDEV &&
940 skip_env "mixed loopback and real device not working" && return
943 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
945 local fs2mdsdev=$(mdsdevname 1_2)
946 local fs2ostdev=$(ostdevname 1_2)
947 local fs2mdsvdev=$(mdsvdevname 1_2)
948 local fs2ostvdev=$(ostvdevname 1_2)
950 # test 8-char fsname as well
951 local FSNAME2=test1234
953 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --nomgs --mgsnode=$MGSNID \
954 --fsname=${FSNAME2} --reformat $fs2mdsdev $fs2mdsvdev || exit 10
956 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --fsname=${FSNAME2} \
957 --reformat $fs2ostdev $fs2ostvdev || exit 10
960 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
961 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
962 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
963 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
965 check_mount || error "check_mount failed"
966 # files written on 1 should not show up on 2
967 cp /etc/passwd $DIR/$tfile
969 [ -e $MOUNT2/$tfile ] && error "File bleed"
972 cp /etc/passwd $MOUNT2/$tfile ||
973 error "cp /etc/passwd $MOUNT2/$tfile failed"
974 rm $MOUNT2/$tfile || error "remove $MOUNT2/$tfile failed"
975 # 2 is actually mounted
976 grep $MOUNT2' ' /proc/mounts > /dev/null || error "$MOUNT2 not mounted"
978 facet_failover fs2mds
979 facet_failover fs2ost
982 # the MDS must remain up until last MDT
984 MDS=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
985 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
986 [ -z "$MDS" ] && error "No MDT"
988 cleanup_nocli || error "cleanup_nocli failed with rc $?"
990 run_test 24a "Multiple MDTs on a single node"
993 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
995 if [ -z "$fs2mds_DEV" ]; then
996 local dev=${SINGLEMDS}_dev
998 is_blkdev $SINGLEMDS $MDSDEV &&
999 skip_env "mixed loopback and real device not working" && return
1002 local fs2mdsdev=$(mdsdevname 1_2)
1003 local fs2mdsvdev=$(mdsvdevname 1_2)
1005 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --mgs --fsname=${FSNAME}2 \
1006 --reformat $fs2mdsdev $fs2mdsvdev || exit 10
1008 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS &&
1009 error "start MDS should fail"
1011 cleanup || error "cleanup failed with rc $?"
1013 run_test 24b "Multiple MGSs on a single node (should return err)"
1017 check_mount || error "check_mount failed"
1018 local MODULES=$($LCTL modules | awk '{ print $2 }')
1019 rmmod $MODULES 2>/dev/null || true
1020 cleanup || error "cleanup failed with $?"
1022 run_test 25 "Verify modules are referenced"
1026 # we need modules before mount for sysctl, so make sure...
1027 do_facet $SINGLEMDS "lsmod | grep -q lustre || modprobe lustre"
1028 #define OBD_FAIL_MDS_FS_SETUP 0x135
1029 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000135"
1030 start_mds && error "MDS started but should not have started"
1031 $LCTL get_param -n devices
1032 DEVS=$($LCTL get_param -n devices | egrep -v MG | wc -l)
1033 [ $DEVS -gt 0 ] && error "number of devices is $DEVS, should be zero"
1034 # start mds to drop writeconf setting
1035 start_mds || error "Unable to start MDS"
1036 stop_mds || error "Unable to stop MDS"
1037 unload_modules_conf || error "unload_modules_conf failed with $?"
1039 run_test 26 "MDT startup failure cleans LOV (should return errs)"
1042 start_ost || error "Unable to start OST1"
1043 start_mds || error "Unable to start MDS"
1044 echo "Requeue thread should have started: "
1045 ps -e | grep ll_cfg_requeue
1046 set_conf_param_and_check ost1 \
1047 "$LCTL get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" \
1048 "$FSNAME-OST0000.ost.client_cache_seconds" ||
1049 error "set_conf_param_and_check ost1 failed"
1050 cleanup_nocli || error "cleanup_nocli failed with rc $?"
1052 run_test 27a "Reacquire MGS lock if OST started first"
1057 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
1058 awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
1060 facet_failover $SINGLEMDS
1061 set_conf_param_and_check $SINGLEMDS \
1062 "$LCTL get_param -n mdt.$device.identity_acquire_expire" \
1063 "$device.mdt.identity_acquire_expire" ||
1064 error "set_conf_param_and_check $SINGLEMDS failed"
1065 set_conf_param_and_check client \
1066 "$LCTL get_param -n mdc.$device-mdc-*.max_rpcs_in_flight"\
1067 "$device.mdc.max_rpcs_in_flight" ||
1068 error "set_conf_param_and_check client failed"
1070 cleanup || error "cleanup failed with $?"
1072 run_test 27b "Reacquire MGS lock after failover"
1076 TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
1077 PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
1079 FINAL=$(($ORIG + 1))
1080 set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
1081 error "first set_conf_param_and_check client failed"
1082 FINAL=$(($FINAL + 1))
1083 set_conf_param_and_check client "$TEST" "$PARAM" $FINAL ||
1084 error "second set_conf_param_and_check client failed"
1085 umount_client $MOUNT || error "umount_client $MOUNT failed"
1086 mount_client $MOUNT || error "mount_client $MOUNT failed"
1088 if [ $RESULT -ne $FINAL ]; then
1089 error "New config not seen: wanted $FINAL got $RESULT"
1091 echo "New config success: got $RESULT"
1093 set_conf_param_and_check client "$TEST" "$PARAM" $ORIG ||
1094 error "third set_conf_param_and_check client failed"
1095 cleanup || error "cleanup failed with rc $?"
1097 run_test 28 "permanent parameter setting"
1099 test_28a() { # LU-4221
1100 [[ $(lustre_version_code ost1) -ge $(version_code 2.5.52) ]] ||
1101 { skip "Need OST version at least 2.5.52" && return 0; }
1102 [ "$(facet_fstype ost1)" = "zfs" ] &&
1103 skip "LU-4221: no such proc params for ZFS OSTs" && return
1110 local device="$FSNAME-OST0000"
1114 # In this test we will set three kinds of proc parameters with
1116 # 1. the ones moved from the OFD to the OSD, and only their
1117 # symlinks kept in obdfilter
1118 # 2. non-symlink ones in the OFD
1119 # 3. non-symlink ones in the OSD
1122 # prepare a symlink parameter in the OFD
1123 name="writethrough_cache_enable"
1124 param="$device.ost.$name"
1125 cmd="$LCTL get_param -n obdfilter.$device.$name"
1127 # conf_param the symlink parameter in the OFD
1128 old=$(do_facet ost1 $cmd)
1129 new=$(((old + 1) % 2))
1130 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1131 error "lctl conf_param $device.ost.$param=$new failed"
1133 # conf_param the target parameter in the OSD
1134 param="$device.osd.$name"
1135 cmd="$LCTL get_param -n osd-*.$device.$name"
1136 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1137 error "lctl conf_param $device.osd.$param=$old failed"
1140 # prepare a non-symlink parameter in the OFD
1141 name="client_cache_seconds"
1142 param="$device.ost.$name"
1143 cmd="$LCTL get_param -n obdfilter.$device.$name"
1145 # conf_param the parameter in the OFD
1146 old=$(do_facet ost1 $cmd)
1148 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1149 error "lctl conf_param $device.ost.$param=$new failed"
1150 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1151 error "lctl conf_param $device.ost.$param=$old failed"
1154 # prepare a non-symlink parameter in the OSD
1156 param="$device.osd.$name"
1157 cmd="$LCTL get_param -n osd-*.$device.$name"
1159 # conf_param the parameter in the OSD
1160 old=$(do_facet ost1 $cmd)
1161 new=$(((old + 1) % 2))
1162 set_conf_param_and_check ost1 "$cmd" "$param" $new ||
1163 error "lctl conf_param $device.osd.$param=$new failed"
1164 set_conf_param_and_check ost1 "$cmd" "$param" $old ||
1165 error "lctl conf_param $device.osd.$param=$old failed"
1167 cleanup || error "cleanup failed with $?"
1169 run_test 28a "set symlink parameters permanently with conf_param"
1172 [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
1173 setup > /dev/null 2>&1
1174 start_ost2 || error "Unable to start OST2"
1177 local PARAM="$FSNAME-OST0001.osc.active"
1178 local PROC_ACT="osc.$FSNAME-OST0001-osc-[^M]*.active"
1179 local PROC_UUID="osc.$FSNAME-OST0001-osc-[^M]*.ost_server_uuid"
1181 ACTV=$($LCTL get_param -n $PROC_ACT)
1183 set_conf_param_and_check client \
1184 "$LCTL get_param -n $PROC_ACT" "$PARAM" $DEAC ||
1185 error "set_conf_param_and_check client failed"
1186 # also check ost_server_uuid status
1187 RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV)
1188 if [ -z "$RESULT" ]; then
1189 error "Client not deactivated: $($LCTL get_param \
1192 echo "Live client success: got $RESULT"
1196 for num in $(seq $MDSCOUNT); do
1197 local mdtosc=$(get_mdtosc_proc_path mds${num} $FSNAME-OST0001)
1198 local MPROC="osc.$mdtosc.active"
1203 RESULT=$(do_facet mds${num} "$LCTL get_param -n $MPROC")
1204 [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
1205 if [ $RESULT -eq $DEAC ]; then
1206 echo -n "MDT deactivated also after"
1207 echo "$WAIT sec (got $RESULT)"
1211 if [ $WAIT -eq $MAX ]; then
1212 error "MDT active: wanted $DEAC got $RESULT"
1214 echo "Waiting $(($MAX - $WAIT))secs for MDT deactivated"
1217 # test new client starts deactivated
1218 umount_client $MOUNT || error "umount_client $MOUNT failed"
1219 mount_client $MOUNT || error "mount_client $MOUNT failed"
1220 RESULT=$($LCTL get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
1221 if [ -z "$RESULT" ]; then
1222 error "New client start active: $(lctl get_param -n $PROC_UUID)"
1224 echo "New client success: got $RESULT"
1227 # make sure it reactivates
1228 set_conf_param_and_check client \
1229 "$LCTL get_param -n $PROC_ACT" "$PARAM" $ACTV ||
1230 error "lctl get_param $PROC_ACT $PARAM $ACTV failed"
1232 umount_client $MOUNT
1233 stop_ost2 || error "Unable to stop OST2"
1234 cleanup_nocli || error "cleanup_nocli failed with $?"
1235 #writeconf to remove all ost2 traces for subsequent tests
1236 writeconf_or_reformat
1238 run_test 29 "permanently remove an OST"
1243 echo Big config llog
1244 TEST="$LCTL get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
1246 LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
1247 for i in ${LIST[@]}; do
1248 set_conf_param_and_check client "$TEST" \
1249 "$FSNAME.llite.max_read_ahead_whole_mb" $i ||
1250 error "Set $FSNAME.llite.max_read_ahead_whole_mb failed"
1252 # make sure client restart still works
1253 umount_client $MOUNT
1254 mount_client $MOUNT || error "mount_client $MOUNT failed"
1255 [ "$($TEST)" -ne "$i" ] &&
1256 error "Param didn't stick across restart $($TEST) != $i"
1259 echo Erase parameter setting
1260 do_facet mgs "$LCTL conf_param \
1261 -d $FSNAME.llite.max_read_ahead_whole_mb" ||
1262 error "Erase param $FSNAME.llite.max_read_ahead_whole_mb failed"
1263 umount_client $MOUNT
1264 mount_client $MOUNT || error "mount_client $MOUNT failed"
1266 echo "deleted (default) value=$FINAL, orig=$ORIG"
1267 # assumes this parameter started at the default value
1268 [ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
1270 cleanup || error "cleanup failed with rc $?"
1272 run_test 30a "Big config llog and conf_param deletion"
1277 # Make a fake nid. Use the OST nid, and add 20 to the least significant
1278 # numerical part of it. Hopefully that's not already a failover address
1280 OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
1281 ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
1282 NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
1283 NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
1284 echo "Using fake nid $NEW"
1286 TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1287 grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
1288 set_conf_param_and_check client "$TEST" \
1289 "$FSNAME-OST0000.failover.node" $NEW ||
1290 error "didn't add failover nid $NEW"
1291 NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1294 # The NIDS value is the failover nid strings and "[" and "]". So
1295 # we need to subtract the space taken by the delimiters. This has
1296 # changed from earlier version of Lustre but this test is run only
1297 # locally so this change will not break interop. See LU-3386
1298 NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 3))
1299 echo "should have 2 failover nids: $NIDCOUNT"
1300 [ $NIDCOUNT -eq 2 ] || error "Failover nid not added"
1301 do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" ||
1302 error "conf_param delete failed"
1303 umount_client $MOUNT
1304 mount_client $MOUNT || error "mount_client $MOUNT failed"
1306 NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import |
1309 NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 3))
1310 echo "only 1 final nid should remain: $NIDCOUNT"
1311 [ $NIDCOUNT -eq 1 ] || error "Failover nids not removed"
1313 cleanup || error "cleanup failed with rc $?"
1315 run_test 30b "Remove failover nids"
1317 test_31() { # bug 10734
1318 # ipaddr must not exist
1319 $MOUNT_CMD 4.3.2.1@tcp:/lustre $MOUNT || true
1320 cleanup || error "cleanup failed with rc $?"
1322 run_test 31 "Connect to non-existent node (shouldn't crash)"
1326 T32_BLIMIT=20480 # Kbytes
1330 # This is not really a test but a tool to create new disk
1331 # image tarballs for the upgrade tests.
1333 # Disk image tarballs should be created on single-node
1334 # clusters by running this test with default configurations
1335 # plus a few mandatory environment settings that are verified
1336 # at the beginning of the test.
1338 test_32newtarball() {
1342 local tmp=$TMP/t32_image_create
1344 if [ $FSNAME != t32fs -o $MDSCOUNT -ne 1 -o \
1345 \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o $OSTCOUNT -ne 1 -o \
1346 -z "$OSTDEV1" ]; then
1347 error "Needs FSNAME=t32fs MDSCOUNT=1 MDSDEV1=<nonexistent_file>" \
1348 "(or MDSDEV, in the case of b1_8) OSTCOUNT=1" \
1349 "OSTDEV1=<nonexistent_file>"
1353 echo "Found stale $tmp"
1357 mkdir $tmp/src || return 1
1358 tar cf - -C $src . | tar xf - -C $tmp/src
1359 dd if=/dev/zero of=$tmp/src/t32_qf_old bs=1M \
1360 count=$(($T32_BLIMIT / 1024 / 2))
1361 chown $T32_QID.$T32_QID $tmp/src/t32_qf_old
1363 # format ost with comma-separated NIDs to verify LU-4460
1364 local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
1365 MGSNID="$MGSNID,$MGSNID" OSTOPT="--failnode=$failnid" formatall
1369 [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ] &&
1370 $LFS quotacheck -ug /mnt/$FSNAME
1371 $LFS setquota -u $T32_QID -b 0 -B $T32_BLIMIT -i 0 -I $T32_ILIMIT \
1374 tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
1377 mkdir $tmp/img || return 1
1381 ls -Rni --time-style=+%s >$tmp/img/list
1382 find . ! -name .lustre -type f -exec sha1sum {} \; |
1383 sort -k 2 >$tmp/img/sha1sums
1385 $LCTL get_param -n version | head -n 1 |
1386 sed -e 's/^lustre: *//' >$tmp/img/commit
1388 [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ] &&
1389 $LFS quotaon -ug /mnt/$FSNAME
1390 $LFS quota -u $T32_QID -v /mnt/$FSNAME
1391 $LFS quota -v -u $T32_QID /mnt/$FSNAME |
1392 awk 'BEGIN { num='1' } { if ($1 == "'/mnt/$FSNAME'") \
1393 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1394 | tr -d "*" > $tmp/img/bspace
1395 $LFS quota -v -u $T32_QID /mnt/$FSNAME |
1396 awk 'BEGIN { num='5' } { if ($1 == "'/mnt/$FSNAME'") \
1397 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1398 | tr -d "*" > $tmp/img/ispace
1403 find -type f -exec sha1sum {} \; | sort -k 2 >$tmp/sha1sums.src
1406 if ! diff -u $tmp/sha1sums.src $tmp/img/sha1sums; then
1407 echo "Data verification failed"
1410 uname -r >$tmp/img/kernel
1411 uname -m >$tmp/img/arch
1413 mv ${MDSDEV1:-$MDSDEV} $tmp/img
1414 mv $OSTDEV1 $tmp/img
1416 version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
1417 sed -e 's/\./_/g') # E.g., "1.8.7" -> "1_8"
1420 tar cjvf $dst/disk$version-$(facet_fstype $SINGLEMDS).tar.bz2 -S *
1425 #run_test 32newtarball "Create a new test_32 disk image tarball for this version"
1428 # The list of applicable tarballs is returned via the caller's
1429 # variable "tarballs".
1432 local node=$(facet_active_host $SINGLEMDS)
1433 local r="do_node $node"
1435 if [ "$CLIENTONLY" ]; then
1436 skip "Client-only testing"
1440 if ! $r which $TUNEFS; then
1441 skip_env "tunefs.lustre required on $node"
1445 local IMGTYPE=$(facet_fstype $SINGLEMDS)
1447 tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\')
1449 if [ -z "$tarballs" ]; then
1450 skip "No applicable tarballs found"
1455 t32_test_cleanup() {
1457 local fstype=$(facet_fstype $SINGLEMDS)
1460 if $shall_cleanup_lustre; then
1461 umount $tmp/mnt/lustre || rc=$?
1463 if $shall_cleanup_mdt; then
1464 $r umount -d $tmp/mnt/mdt || rc=$?
1466 if $shall_cleanup_mdt1; then
1467 $r umount -d $tmp/mnt/mdt1 || rc=$?
1469 if $shall_cleanup_ost; then
1470 $r umount -d $tmp/mnt/ost || rc=$?
1475 if [ $fstype == "zfs" ]; then
1476 $r $ZPOOL destroy t32fs-mdt1 || rc=$?
1477 $r $ZPOOL destroy t32fs-ost1 || rc=$?
1482 t32_bits_per_long() {
1484 # Yes, this is not meant to be perfect.
1494 t32_reload_modules() {
1496 local all_removed=false
1499 while ((i < 20)); do
1500 echo "Unloading modules on $node: Attempt $i"
1501 do_rpc_nodes $node $LUSTRE_RMMOD $(facet_fstype $SINGLEMDS) &&
1503 do_rpc_nodes $node check_mem_leak || return 1
1504 if $all_removed; then
1505 do_rpc_nodes $node load_modules
1511 echo "Unloading modules on $node: Given up"
1515 t32_wait_til_devices_gone() {
1521 echo wait for devices to go
1522 while ((i < 20)); do
1523 devices=$(do_rpc_nodes $node $LCTL device_list | wc -l)
1524 loops=$(do_rpc_nodes $node losetup -a | grep -c t32)
1525 ((devices == 0 && loops == 0)) && return 0
1529 echo "waiting for dev on $node: dev $devices loop $loops given up"
1530 do_rpc_nodes $node "losetup -a"
1531 do_rpc_nodes $node "$LCTL device_list"
1535 t32_verify_quota() {
1539 local fstype=$(facet_fstype $SINGLEMDS)
1543 $LFS quota -u $T32_QID -v $mnt
1545 qval=$($LFS quota -v -u $T32_QID $mnt |
1546 awk 'BEGIN { num='1' } { if ($1 == "'$mnt'") \
1547 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1549 [ $qval -eq $img_bspace ] || {
1550 echo "bspace, act:$qval, exp:$img_bspace"
1554 qval=$($LFS quota -v -u $T32_QID $mnt |
1555 awk 'BEGIN { num='5' } { if ($1 == "'$mnt'") \
1556 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1558 [ $qval -eq $img_ispace ] || {
1559 echo "ispace, act:$qval, exp:$img_ispace"
1563 qval=$($LFS quota -v -u $T32_QID $mnt |
1564 awk 'BEGIN { num='3' } { if ($1 == "'$mnt'") \
1565 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1567 [ $qval -eq $T32_BLIMIT ] || {
1568 echo "blimit, act:$qval, exp:$T32_BLIMIT"
1572 qval=$($LFS quota -v -u $T32_QID $mnt |
1573 awk 'BEGIN { num='7' } { if ($1 == "'$mnt'") \
1574 { if (NF == 1) { getline } else { num++ } ; print $num;} }' \
1576 [ $qval -eq $T32_ILIMIT ] || {
1577 echo "ilimit, act:$qval, exp:$T32_ILIMIT"
1581 do_node $node $LCTL conf_param $fsname.quota.mdt=ug
1582 cmd="$LCTL get_param -n osd-$fstype.$fsname-MDT0000"
1583 cmd=$cmd.quota_slave.enabled
1584 wait_update $node "$cmd" "ug" || {
1585 echo "Enable mdt quota failed"
1589 do_node $node $LCTL conf_param $fsname.quota.ost=ug
1590 cmd="$LCTL get_param -n osd-$fstype.$fsname-OST0000"
1591 cmd=$cmd.quota_slave.enabled
1592 wait_update $node "$cmd" "ug" || {
1593 echo "Enable ost quota failed"
1598 runas -u $T32_QID -g $T32_QID dd if=/dev/zero of=$mnt/t32_qf_new \
1599 bs=1M count=$(($T32_BLIMIT / 1024)) oflag=sync && {
1600 echo "Write succeed, but expect -EDQUOT"
1603 rm -f $mnt/t32_qf_new
1605 runas -u $T32_QID -g $T32_QID createmany -m $mnt/t32_qf_ \
1607 echo "Create succeed, but expect -EDQUOT"
1610 unlinkmany $mnt/t32_qf_ $T32_ILIMIT
1618 local dne_upgrade=${dne_upgrade:-"no"}
1619 local ff_convert=${ff_convert:-"no"}
1620 local shall_cleanup_mdt=false
1621 local shall_cleanup_mdt1=false
1622 local shall_cleanup_ost=false
1623 local shall_cleanup_lustre=false
1624 local node=$(facet_active_host $SINGLEMDS)
1625 local r="do_node $node"
1626 local node2=$(facet_active_host mds2)
1634 local nid=$($r $LCTL list_nids | head -1)
1640 local fstype=$(facet_fstype $SINGLEMDS)
1641 local mdt_dev=$tmp/mdt
1642 local ost_dev=$tmp/ost
1644 trap 'trap - RETURN; t32_test_cleanup' RETURN
1646 mkdir -p $tmp/mnt/lustre || error "mkdir $tmp/mnt/lustre failed"
1647 $r mkdir -p $tmp/mnt/{mdt,ost}
1648 $r tar xjvf $tarball -S -C $tmp || {
1649 error_noexit "Unpacking the disk image tarball"
1652 img_commit=$($r cat $tmp/commit)
1653 img_kernel=$($r cat $tmp/kernel)
1654 img_arch=$($r cat $tmp/arch)
1655 img_bspace=$($r cat $tmp/bspace)
1656 img_ispace=$($r cat $tmp/ispace)
1657 echo "Upgrading from $(basename $tarball), created with:"
1658 echo " Commit: $img_commit"
1659 echo " Kernel: $img_kernel"
1660 echo " Arch: $img_arch"
1661 echo "OST version: $(get_lustre_version ost1)"
1663 # The conversion can be made only when both of the following
1664 # conditions are satisfied:
1665 # - ost device img version < 2.3.64
1666 # - ost server version >= 2.5
1667 [ $(version_code $img_commit) -ge $(version_code 2.3.64) -o \
1668 $(lustre_version_code ost1) -lt $(version_code 2.5.0) ] &&
1671 if [ $fstype == "zfs" ]; then
1673 $r $ZPOOL import -f -d $tmp t32fs-mdt1
1674 $r $ZPOOL import -f -d $tmp t32fs-ost1
1675 mdt_dev=t32fs-mdt1/mdt1
1676 ost_dev=t32fs-ost1/ost1
1677 wait_update_facet $SINGLEMDS "$ZPOOL list |
1678 awk '/^t32fs-mdt1/ { print \\\$1 }'" "t32fs-mdt1" || {
1679 error_noexit "import zfs pool failed"
1684 $r $LCTL set_param debug="$PTLDEBUG"
1686 $r $TUNEFS --dryrun $mdt_dev || {
1688 error_noexit "tunefs.lustre before mounting the MDT"
1691 if [ "$writeconf" ]; then
1693 if [ $fstype == "ldiskfs" ]; then
1695 $r $TUNEFS --quota $mdt_dev || {
1697 error_noexit "Enable mdt quota feature"
1702 if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
1703 [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
1704 { skip "LU-2200: Cannot run over Inifiniband w/o lctl replace_nids "
1705 "(Need MGS version at least 2.3.59)"; return 0; }
1707 local osthost=$(facet_active_host ost1)
1708 local ostnid=$(do_node $osthost $LCTL list_nids | head -1)
1711 if [ $fstype == "ldiskfs" ]; then
1714 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt
1715 $r $LCTL replace_nids $fsname-OST0000 $ostnid
1716 $r $LCTL replace_nids $fsname-MDT0000 $nid
1717 $r umount -d $tmp/mnt/mdt
1720 mopts=exclude=$fsname-OST0000
1721 if [ $fstype == "ldiskfs" ]; then
1726 t32_wait_til_devices_gone $node
1728 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
1730 error_noexit "Mounting the MDT"
1733 shall_cleanup_mdt=true
1735 if [ "$dne_upgrade" != "no" ]; then
1736 local fs2mdsdev=$(mdsdevname 1_2)
1737 local fs2mdsvdev=$(mdsvdevname 1_2)
1739 echo "mkfs new MDT on ${fs2mdsdev}...."
1740 if [ $(facet_fstype mds1) == ldiskfs ]; then
1741 mkfsoptions="--mkfsoptions=\\\"-J size=8\\\""
1744 add fs2mds $(mkfs_opts mds2 $fs2mdsdev $fsname) --reformat \
1745 $mkfsoptions $fs2mdsdev $fs2mdsvdev > /dev/null || {
1746 error_noexit "Mkfs new MDT failed"
1750 $r $TUNEFS --dryrun $fs2mdsdev || {
1751 error_noexit "tunefs.lustre before mounting the MDT"
1755 echo "mount new MDT....$fs2mdsdev"
1756 $r mkdir -p $tmp/mnt/mdt1
1757 $r $MOUNT_CMD -o $mopts $fs2mdsdev $tmp/mnt/mdt1 || {
1758 error_noexit "mount mdt1 failed"
1762 $r $LCTL set_param -n mdt.${fsname}*.enable_remote_dir=1 ||
1763 error_noexit "enable remote dir create failed"
1765 shall_cleanup_mdt1=true
1768 uuid=$($r $LCTL get_param -n mdt.$fsname-MDT0000.uuid) || {
1769 error_noexit "Getting MDT UUID"
1772 if [ "$uuid" != $fsname-MDT0000_UUID ]; then
1773 error_noexit "Unexpected MDT UUID: \"$uuid\""
1777 $r $TUNEFS --dryrun $ost_dev || {
1778 error_noexit "tunefs.lustre before mounting the OST"
1781 if [ "$writeconf" ]; then
1782 mopts=mgsnode=$nid,$writeconf
1783 if [ $fstype == "ldiskfs" ]; then
1785 $r $TUNEFS --quota $ost_dev || {
1787 error_noexit "Enable ost quota feature"
1793 if [ $fstype == "ldiskfs" ]; then
1797 $r $MOUNT_CMD -o $mopts $ost_dev $tmp/mnt/ost || {
1798 error_noexit "Mounting the OST"
1801 shall_cleanup_ost=true
1803 uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0000.uuid) || {
1804 error_noexit "Getting OST UUID"
1807 if [ "$uuid" != $fsname-OST0000_UUID ]; then
1808 error_noexit "Unexpected OST UUID: \"$uuid\""
1812 $r $LCTL conf_param $fsname-OST0000.osc.max_dirty_mb=15 || {
1813 error_noexit "Setting \"max_dirty_mb\""
1816 $r $LCTL conf_param $fsname-OST0000.failover.node=$nid || {
1817 error_noexit "Setting OST \"failover.node\""
1820 $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=9 || {
1821 error_noexit "Setting \"max_rpcs_in_flight\""
1824 $r $LCTL conf_param $fsname-MDT0000.failover.node=$nid || {
1825 error_noexit "Setting MDT \"failover.node\""
1828 $r $LCTL pool_new $fsname.interop || {
1829 error_noexit "Setting \"interop\""
1832 $r $LCTL conf_param $fsname-MDT0000.lov.stripesize=4M || {
1833 error_noexit "Setting \"lov.stripesize\""
1836 $r $LCTL conf_param $fsname-MDT0000.mdd.atime_diff=70 || {
1837 error_noexit "Setting \"mdd.atime_diff\""
1841 if [ "$ff_convert" != "no" -a $(facet_fstype ost1) == "ldiskfs" ]; then
1842 $r $LCTL lfsck_start -M $fsname-OST0000 || {
1843 error_noexit "Start OI scrub on OST0"
1847 # The oi_scrub should be on ost1, but for test_32(),
1848 # all on the SINGLEMDS.
1849 wait_update_facet $SINGLEMDS "$LCTL get_param -n \
1850 osd-ldiskfs.$fsname-OST0000.oi_scrub |
1851 awk '/^status/ { print \\\$2 }'" "completed" 30 || {
1852 error_noexit "Failed to get the expected 'completed'"
1856 local UPDATED=$($r $LCTL get_param -n \
1857 osd-ldiskfs.$fsname-OST0000.oi_scrub |
1858 awk '/^updated/ { print $2 }')
1859 [ $UPDATED -ge 1 ] || {
1860 error_noexit "Only $UPDATED objects have been converted"
1865 if [ "$dne_upgrade" != "no" ]; then
1866 $r $LCTL conf_param \
1867 $fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
1868 error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
1871 $r $LCTL conf_param $fsname-MDT0001.failover.node=$nid || {
1872 error_noexit "Setting MDT1 \"failover.node\""
1875 $r $LCTL conf_param $fsname-MDT0001.lov.stripesize=4M || {
1876 error_noexit "Setting MDT1 \"lov.stripesize\""
1882 if [ "$writeconf" ]; then
1883 $MOUNT_CMD $nid:/$fsname $tmp/mnt/lustre || {
1884 error_noexit "Mounting the client"
1887 shall_cleanup_lustre=true
1888 $LCTL set_param debug="$PTLDEBUG"
1890 t32_verify_quota $node $fsname $tmp/mnt/lustre || {
1891 error_noexit "verify quota failed"
1895 if [ "$dne_upgrade" != "no" ]; then
1896 $LFS mkdir -i 1 $tmp/mnt/lustre/remote_dir || {
1897 error_noexit "set remote dir failed"
1901 pushd $tmp/mnt/lustre
1902 tar -cf - . --exclude=./remote_dir |
1903 tar -xvf - -C remote_dir 1>/dev/null || {
1904 error_noexit "cp to remote dir failed"
1910 dd if=/dev/zero of=$tmp/mnt/lustre/tmp_file bs=10k count=10 || {
1911 error_noexit "dd failed"
1914 rm -rf $tmp/mnt/lustre/tmp_file || {
1915 error_noexit "rm failed"
1919 if $r test -f $tmp/sha1sums; then
1920 # LU-2393 - do both sorts on same node to ensure locale
1922 $r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
1923 if [ "$dne_upgrade" != "no" ]; then
1924 pushd $tmp/mnt/lustre/remote_dir
1926 pushd $tmp/mnt/lustre
1929 find ! -name .lustre -type f -exec sha1sum {} \; |
1930 sort -k 2 >$tmp/sha1sums || {
1931 error_noexit "sha1sum"
1935 if ! diff -ub $tmp/sha1sums.orig $tmp/sha1sums; then
1936 error_noexit "sha1sum verification failed"
1940 echo "sha1sum verification skipped"
1943 if [ "$dne_upgrade" != "no" ]; then
1944 rm -rf $tmp/mnt/lustre/remote_dir || {
1945 error_noexit "remove remote dir failed"
1950 if $r test -f $tmp/list; then
1952 # There is not a Test Framework API to copy files to or
1953 # from a remote node.
1955 # LU-2393 - do both sorts on same node to ensure locale
1957 $r cat $tmp/list | sort -k 6 >$tmp/list.orig
1958 pushd $tmp/mnt/lustre
1959 ls -Rni --time-style=+%s | sort -k 6 >$tmp/list || {
1965 # 32-bit and 64-bit clients use different algorithms to
1966 # convert FIDs into inode numbers. Hence, remove the inode
1967 # numbers from the lists, if the original list was created
1968 # on an architecture with different number of bits per
1971 if [ $(t32_bits_per_long $(uname -m)) != \
1972 $(t32_bits_per_long $img_arch) ]; then
1973 echo "Different number of bits per \"long\" from the disk image"
1974 for list in list.orig list; do
1975 sed -i -e 's/^[0-9]\+[ \t]\+//' $tmp/$list
1978 if ! diff -ub $tmp/list.orig $tmp/list; then
1979 error_noexit "list verification failed"
1983 echo "list verification skipped"
1987 # When adding new data verification tests, please check for
1988 # the presence of the required reference files first, like
1989 # the "sha1sums" and "list" tests above, to avoid the need to
1990 # regenerate every image for each test addition.
1993 nrpcs_orig=$($LCTL get_param \
1994 -n mdc.*MDT0000*.max_rpcs_in_flight) || {
1995 error_noexit "Getting \"max_rpcs_in_flight\""
1998 nrpcs=$((nrpcs_orig + 5))
1999 $r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=$nrpcs || {
2000 error_noexit "Changing \"max_rpcs_in_flight\""
2003 wait_update $HOSTNAME "$LCTL get_param \
2004 -n mdc.*MDT0000*.max_rpcs_in_flight" $nrpcs || {
2005 error_noexit "Verifying \"max_rpcs_in_flight\""
2009 umount $tmp/mnt/lustre || {
2010 error_noexit "Unmounting the client"
2013 shall_cleanup_lustre=false
2015 if [ "$dne_upgrade" != "no" ]; then
2016 $r umount -d $tmp/mnt/mdt1 || {
2017 error_noexit "Unmounting the MDT2"
2020 shall_cleanup_mdt1=false
2023 $r umount -d $tmp/mnt/mdt || {
2024 error_noexit "Unmounting the MDT"
2027 shall_cleanup_mdt=false
2029 $r umount -d $tmp/mnt/ost || {
2030 error_noexit "Unmounting the OST"
2033 shall_cleanup_ost=false
2035 t32_reload_modules $node || {
2036 error_noexit "Reloading modules"
2040 # mount a second time to make sure we didnt leave upgrade flag on
2041 $r $TUNEFS --dryrun $mdt_dev || {
2043 error_noexit "tunefs.lustre before remounting the MDT"
2047 mopts=exclude=$fsname-OST0000
2048 if [ $fstype == "ldiskfs" ]; then
2051 $r $MOUNT_CMD -o $mopts $mdt_dev $tmp/mnt/mdt || {
2052 error_noexit "Remounting the MDT"
2055 shall_cleanup_mdt=true
2065 for tarball in $tarballs; do
2066 t32_test $tarball || let "rc += $?"
2070 run_test 32a "Upgrade (not live)"
2078 for tarball in $tarballs; do
2079 t32_test $tarball writeconf || let "rc += $?"
2083 run_test 32b "Upgrade with writeconf"
2090 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
2092 for tarball in $tarballs; do
2093 dne_upgrade=yes t32_test $tarball writeconf || rc=$?
2097 run_test 32c "dne upgrade test"
2105 for tarball in $tarballs; do
2106 ff_convert=yes t32_test $tarball || rc=$?
2110 run_test 32d "convert ff test"
2112 test_33a() { # bug 12333, was test_33
2113 local FSNAME2=test-123
2114 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2117 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
2119 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
2120 local dev=${SINGLEMDS}_dev
2121 local MDSDEV=${!dev}
2122 is_blkdev $SINGLEMDS $MDSDEV &&
2123 skip_env "mixed loopback and real device not working" &&
2127 local fs2mdsdev=$(mdsdevname 1_2)
2128 local fs2ostdev=$(ostdevname 1_2)
2129 local fs2mdsvdev=$(mdsvdevname 1_2)
2130 local fs2ostvdev=$(ostvdevname 1_2)
2132 if [ $(facet_fstype mds1) == ldiskfs ]; then
2133 mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
2136 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
2137 --reformat $mkfsoptions $fs2mdsdev $fs2mdsvdev || exit 10
2138 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
2139 --fsname=${FSNAME2} --index=8191 --reformat $fs2ostdev \
2140 $fs2ostvdev || exit 10
2142 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT
2143 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
2144 do_facet $SINGLEMDS "$LCTL conf_param $FSNAME2.sys.timeout=200" ||
2145 error "$LCTL conf_param $FSNAME2.sys.timeout=200 failed"
2146 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
2147 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
2150 cp /etc/hosts $MOUNT2/ || error "copy /etc/hosts $MOUNT2/ failed"
2151 $GETSTRIPE $MOUNT2/hosts || error "$GETSTRIPE $MOUNT2/hosts failed"
2156 cleanup_nocli || error "cleanup_nocli failed with $?"
2158 run_test 33a "Mount ost with a large index number"
2160 test_33b() { # was test_34
2163 do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
2164 # Drop lock cancelation reply during umount
2165 #define OBD_FAIL_LDLM_CANCEL_NET 0x304
2166 do_facet client $LCTL set_param fail_loc=0x80000304
2167 #lctl set_param debug=-1
2168 umount_client $MOUNT
2169 cleanup || error "cleanup failed with $?"
2171 run_test 33b "Drop cancel during umount"
2175 do_facet client "sh runmultiop_bg_pause $DIR/file O_c"
2176 manual_umount_client
2178 do_facet client killall -USR1 multiop
2179 if [ $rc -eq 0 ]; then
2180 error "umount not fail!"
2183 cleanup || error "cleanup failed with rc $?"
2185 run_test 34a "umount with opened file should be fail"
2189 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
2190 stop_mds || error "Unable to stop MDS"
2192 manual_umount_client --force || error "mtab after failed umount with $?"
2194 cleanup || error "cleanup failed with $?"
2196 run_test 34b "force umount with failed mds should be normal"
2200 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
2201 stop_ost || error "Unable to stop OST1"
2203 manual_umount_client --force || error "mtab after failed umount with $?"
2205 cleanup || error "cleanup failed with $?"
2207 run_test 34c "force umount with failed ost should be normal"
2209 test_35a() { # bug 12459
2212 DBG_SAVE="`$LCTL get_param -n debug`"
2213 $LCTL set_param debug="ha"
2215 log "Set up a fake failnode for the MDS"
2217 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
2218 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
2219 do_facet mgs "$LCTL conf_param \
2220 ${device}.failover.node=$(h2$NETTYPE $FAKENID)" ||
2221 error "Setting ${device}.failover.node=\
2222 $(h2$NETTYPE $FAKENID) failed."
2224 log "Wait for RECONNECT_INTERVAL seconds (10s)"
2227 MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
2230 log "Stopping the MDT: $device"
2231 stop_mdt 1 || error "MDT0 stop fail"
2233 df $MOUNT > /dev/null 2>&1 &
2235 log "Restarting the MDT: $device"
2236 start_mdt 1 || error "MDT0 start fail"
2237 log "Wait for df ($DFPID) ... "
2240 $LCTL set_param debug="$DBG_SAVE"
2242 # retrieve from the log the first server that the client tried to
2243 # contact after the connection loss
2244 $LCTL dk $TMP/lustre-log-$TESTNAME.log
2245 NEXTCONN=`awk "/${MSG}/ {start = 1;}
2246 /import_select_connection.*$device-mdc.* using connection/ {
2248 if (\\\$NF ~ /$FAKENID/)
2254 }" $TMP/lustre-log-$TESTNAME.log`
2255 [ "$NEXTCONN" != "0" ] &&
2256 error "Tried to connect to ${NEXTCONN} not last active server"
2257 cleanup || error "cleanup failed with $?"
2258 # remove nid settings
2259 writeconf_or_reformat
2261 run_test 35a "Reconnect to the last active server first"
2263 test_35b() { # bug 18674
2264 remote_mds || { skip "local MDS" && return 0; }
2268 $LCTL set_param debug="ha"
2270 MSG="conf-sanity.sh test_35b `date +%F%kh%Mm%Ss`"
2273 log "Set up a fake failnode for the MDS"
2275 local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" |
2276 awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
2277 do_facet mgs "$LCTL conf_param \
2278 ${device}.failover.node=$(h2$NETTYPE $FAKENID)" ||
2279 error "Set ${device}.failover.node=\
2280 $(h2$NETTYPE $FAKENID) failed"
2282 local at_max_saved=0
2283 # adaptive timeouts may prevent seeing the issue
2284 if at_is_enabled; then
2285 at_max_saved=$(at_max_get mds)
2286 at_max_set 0 mds client
2289 mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
2291 log "Injecting EBUSY on MDS"
2292 # Setting OBD_FAIL_MDS_RESEND=0x136
2293 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000136" ||
2294 error "unable to set param fail_loc=0x80000136"
2296 $LCTL set_param mdc.${FSNAME}*.stats=clear
2298 log "Creating a test file and stat it"
2299 touch $MOUNT/$tdir/$tfile || error "touch $MOUNT/$tdir/$tfile failed"
2300 stat $MOUNT/$tdir/$tfile
2302 log "Stop injecting EBUSY on MDS"
2303 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0" ||
2304 error "unable to set param fail_loc=0"
2305 rm -f $MOUNT/$tdir/$tfile || error "remove $MOUNT/$tdir/$tfile failed"
2308 # restore adaptive timeout
2309 [ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds client
2311 $LCTL dk $TMP/lustre-log-$TESTNAME.log
2313 CONNCNT=$($LCTL get_param mdc.${FSNAME}*.stats |
2314 awk '/mds_connect/{print $2}')
2316 # retrieve from the log if the client has ever tried to
2317 # contact the fake server after the loss of connection
2318 FAILCONN=`awk "BEGIN {ret = 0;}
2319 /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
2321 if (\\\$NF ~ /$FAKENID/) {
2326 END {print ret}" $TMP/lustre-log-$TESTNAME.log`
2328 [ "$FAILCONN" == "0" ] &&
2329 error "The client reconnection has not been triggered"
2330 [ "$FAILCONN" == "2" ] &&
2331 error "Primary server busy, client reconnect to failover failed"
2334 # When OBD_FAIL_MDS_RESEND is hit, we sleep for 2 * obd_timeout
2335 # Reconnects are supposed to be rate limited to one every 5s
2336 [ $CONNCNT -gt $((2 * $TIMEOUT / 5 + 1)) ] &&
2337 error "Too many reconnects $CONNCNT"
2339 cleanup || error "cleanup failed with $?"
2340 # remove nid settings
2341 writeconf_or_reformat
2343 run_test 35b "Continue reconnection retries, if the active server is busy"
2346 [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
2348 [ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] ||
2349 { skip "remote OST" && return 0; }
2352 local FSNAME2=test1234
2353 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2355 [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
2357 if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
2358 is_blkdev $SINGLEMDS $MDSDEV &&
2359 skip_env "mixed loopback and real device not working" && return
2362 local fs2mdsdev=$(mdsdevname 1_2)
2363 local fs2ostdev=$(ostdevname 1_2)
2364 local fs3ostdev=$(ostdevname 2_2)
2365 local fs2mdsvdev=$(mdsvdevname 1_2)
2366 local fs2ostvdev=$(ostvdevname 1_2)
2367 local fs3ostvdev=$(ostvdevname 2_2)
2369 add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
2370 --reformat $fs2mdsdev $fs2mdsvdev || exit 10
2371 # XXX after we support non 4K disk blocksize in ldiskfs, specify a
2372 # different one than the default value here.
2373 add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
2374 --fsname=${FSNAME2} --reformat $fs2ostdev $fs2ostvdev || exit 10
2375 add fs3ost $(mkfs_opts ost2 ${fs3ostdev}) --mgsnode=$MGSNID \
2376 --fsname=${FSNAME2} --reformat $fs3ostdev $fs3ostvdev || exit 10
2378 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
2379 start fs2ost $fs2ostdev $OST_MOUNT_OPTS
2380 start fs3ost $fs3ostdev $OST_MOUNT_OPTS
2381 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
2382 $MOUNT_CMD $MGSNID:/${FSNAME2} $MOUNT2 || error "$MOUNT_CMD failed"
2384 sleep 5 # until 11778 fixed
2386 dd if=/dev/zero of=$MOUNT2/$tfile bs=1M count=7 || error "dd failed"
2388 BKTOTAL=$($LCTL get_param -n obdfilter.*.kbytestotal |
2389 awk 'BEGIN{total=0}; {total+=$1}; END{print total}')
2390 BKFREE=$($LCTL get_param -n obdfilter.*.kbytesfree |
2391 awk 'BEGIN{free=0}; {free+=$1}; END{print free}')
2392 BKAVAIL=$($LCTL get_param -n obdfilter.*.kbytesavail |
2393 awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
2394 STRING=$(df -P $MOUNT2 | tail -n 1 | awk '{print $2","$3","$4}')
2395 DFTOTAL=$(echo $STRING | cut -d, -f1)
2396 DFUSED=$(echo $STRING | cut -d, -f2)
2397 DFAVAIL=$(echo $STRING | cut -d, -f3)
2398 DFFREE=$(($DFTOTAL - $DFUSED))
2400 ALLOWANCE=$((64 * $OSTCOUNT))
2402 if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
2403 [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
2404 echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
2407 if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
2408 [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
2409 echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
2412 if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
2413 [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
2414 echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
2419 stop fs3ost -f || error "unable to stop OST3"
2420 stop fs2ost -f || error "unable to stop OST2"
2421 stop fs2mds -f || error "unable to stop second MDS"
2422 unload_modules_conf || error "unable unload modules"
2425 run_test 36 "df report consistency on OSTs with different block size"
2428 local mntpt=$(facet_mntpt $SINGLEMDS)
2429 local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
2430 local mdsdev_sym="$TMP/sym_mdt.img"
2431 local opts=$MDS_MOUNT_OPTS
2434 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
2435 skip "Currently only applicable to ldiskfs-based MDTs"
2439 echo "MDS : $mdsdev"
2440 echo "SYMLINK : $mdsdev_sym"
2441 do_facet $SINGLEMDS rm -f $mdsdev_sym
2443 do_facet $SINGLEMDS ln -s $mdsdev $mdsdev_sym
2445 echo "mount symlink device - $mdsdev_sym"
2447 if ! do_facet $SINGLEMDS test -b $mdsdev; then
2448 opts=$(csa_add "$opts" -o loop)
2450 mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
2451 $mdsdev_sym $mntpt 2>&1)
2454 echo mount_op=$mount_op
2456 do_facet $SINGLEMDS "umount -d $mntpt && rm -f $mdsdev_sym"
2458 if $(echo $mount_op | grep -q "unable to set tunable"); then
2459 error "set tunables failed for symlink device"
2462 [ $rc -eq 0 ] || error "mount symlink $mdsdev_sym failed! rc=$rc"
2464 run_test 37 "verify set tunables works for symlink device"
2466 test_38() { # bug 14222
2467 local fstype=$(facet_fstype $SINGLEMDS)
2468 local mntpt=$(facet_mntpt $SINGLEMDS)
2473 local SRC="/etc /bin"
2474 local FILES=$(find $SRC -type f -mtime +1 | head -n $COUNT)
2475 log "copying $(echo $FILES | wc -w) files to $DIR/$tdir"
2476 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
2477 tar cf - $FILES | tar xf - -C $DIR/$tdir ||
2478 error "copying $SRC to $DIR/$tdir"
2480 umount_client $MOUNT || error "umount_client $MOUNT failed"
2481 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2482 stop_mds || error "Unable to stop MDS"
2483 log "delete lov_objid file on MDS"
2485 mount_fstype $SINGLEMDS || error "mount MDS failed (1)"
2487 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid; rm $mntpt/lov_objid"
2489 unmount_fstype $SINGLEMDS || error "umount failed (1)"
2491 # check create in mds_lov_connect
2492 start_mds || error "unable to start MDS"
2493 mount_client $MOUNT || error "mount_client $MOUNT failed"
2495 [ $V ] && log "verifying $DIR/$tdir/$f"
2496 diff -q $f $DIR/$tdir/$f || ERROR=y
2498 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2499 if [ "$ERROR" = "y" ]; then
2500 # check it's updates in sync
2501 umount_client $MOUNT
2503 mount_fstype $SIGNLEMDS
2504 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2505 unmount_fstype $SINGLEMDS
2506 error "old and new files are different after connect" || true
2508 touch $DIR/$tdir/f2 || error "f2 file create failed"
2510 # check it's updates in sync
2511 umount_client $MOUNT || error "second umount_client $MOUNT failed"
2514 mount_fstype $SINGLEMDS || error "mount MDS failed (3)"
2516 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2517 do_facet $SINGLEMDS dd if=/dev/zero of=$mntpt/lov_objid.clear count=8
2519 unmount_fstype $SINGLEMDS || error "umount failed (3)"
2521 start_mds || error "unable to start MDS"
2522 mount_client $MOUNT || error "mount_client $MOUNT failed"
2524 [ $V ] && log "verifying $DIR/$tdir/$f"
2525 diff -q $f $DIR/$tdir/$f || ERROR=y
2527 touch $DIR/$tdir/f3 || error "f3 file create failed"
2528 do_facet $SINGLEMDS "$LCTL get_param osp.*.prealloc_next_id"
2529 umount_client $MOUNT || error "third umount_client $MOUNT failed"
2531 mount_fstype $SINGLEMDS || error "mount MDS failed (4)"
2532 do_facet $SINGLEMDS "od -Ax -td8 $mntpt/lov_objid"
2533 unmount_fstype $SINGLEMDS || error "umount failed (4)"
2535 [ "$ERROR" = "y" ] &&
2536 error "old and new files are different after sync" || true
2538 log "files compared the same"
2539 cleanup || error "cleanup failed with $?"
2541 run_test 38 "MDS recreates missing lov_objid file from OST data"
2546 cleanup || error "cleanup failed with $?"
2547 perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
2548 error "memory leak detected" || true
2550 run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
2552 test_40() { # bug 15759
2553 start_ost || error "Unable to start OST1"
2554 #define OBD_FAIL_TGT_TOOMANY_THREADS 0x706
2555 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000706"
2557 cleanup || error "cleanup failed with rc $?"
2559 run_test 40 "race during service thread startup"
2561 test_41a() { #bug 14134
2562 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
2563 ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
2564 skip "Loop devices does not work with nosvc option"
2568 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2570 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
2571 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS
2572 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
2573 mount_client $MOUNT || error "mount_client $MOUNT failed"
2576 echo "blah blah" > $MOUNT/$tfile
2579 umount_client $MOUNT || error "umount_client $MOUNT failed"
2580 stop ost1 -f || error "unable to stop OST1"
2581 stop_mds || error "Unable to stop MDS"
2582 stop_mds || error "Unable to stop MDS on second try"
2583 unload_modules_conf || error "unload_modules_conf failed"
2585 run_test 41a "mount mds with --nosvc and --nomgs"
2588 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
2589 ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
2590 skip "Loop devices does not work with nosvc option"
2594 ! combined_mgs_mds && skip "needs combined mgs device" && return 0
2598 local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
2600 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
2601 start_ost || error "Unable to start OST1"
2602 start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
2603 mount_client $MOUNT || error "mount_client $MOUNT failed"
2606 echo "blah blah" > $MOUNT/$tfile
2607 cat $MOUNT/$tfile || error "cat $MOUNT/$tfile failed"
2609 umount_client $MOUNT || error "umount_client $MOUNT failed"
2610 stop_ost || error "Unable to stop OST1"
2611 stop_mds || error "Unable to stop MDS"
2612 stop_mds || error "Unable to stop MDS on second try"
2614 run_test 41b "mount mds with --nosvc and --nomgs on first mount"
2617 local server_version=$(lustre_version_code $SINGLEMDS)
2619 [[ $server_version -ge $(version_code 2.6.52) ]] ||
2620 [[ $server_version -ge $(version_code 2.5.26) &&
2621 $server_version -lt $(version_code 2.5.50) ]] ||
2622 [[ $server_version -ge $(version_code 2.5.4) &&
2623 $server_version -lt $(version_code 2.5.11) ]] ||
2624 { skip "Need MDS version 2.5.4+ or 2.5.26+ or 2.6.52+"; return; }
2627 # MDT concurrent start
2628 #define OBD_FAIL_TGT_DELAY_CONNECT 0x703
2629 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x703"
2630 start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS &
2633 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x0"
2634 start mds1 $(mdsdevname 1) $MDS_MOUNT_OPTS &
2640 if [ $rc == 0 ] && [ $rc2 == 114 ]; then
2641 echo "1st MDT start succeed"
2642 echo "2nd MDT start failed with EALREADY"
2643 elif [ $rc2 == 0 ] && [ $rc == 114 ]; then
2644 echo "1st MDT start failed with EALREADY"
2645 echo "2nd MDT start succeed"
2648 error "unexpected concurrent MDT mounts result, rc=$rc rc2=$rc2"
2651 # OST concurrent start
2652 #define OBD_FAIL_TGT_DELAY_CONNECT 0x703
2653 do_facet ost1 "$LCTL set_param fail_loc=0x703"
2654 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &
2657 do_facet ost1 "$LCTL set_param fail_loc=0x0"
2658 start ost1 $(ostdevname 1) $OST_MOUNT_OPTS &
2664 if [ $rc == 0 ] && [ $rc2 == 114 ]; then
2665 echo "1st OST start succeed"
2666 echo "2nd OST start failed with EALREADY"
2667 elif [ $rc2 == 0 ] && [ $rc == 114 ]; then
2668 echo "1st OST start failed with EALREADY"
2669 echo "2nd OST start succeed"
2673 error "unexpected concurrent OST mounts result, rc=$rc rc2=$rc2"
2679 # verify everything ok
2684 error "MDT(s) start failed"
2692 error "OST(s) start failed"
2700 error "client start failed"
2707 error "client mount failed"
2711 run_test 41c "concurrent mounts of MDT/OST should all fail but one"
2713 test_42() { #bug 14693
2715 check_mount || error "client was not mounted"
2717 do_facet mgs $LCTL conf_param $FSNAME.llite.some_wrong_param=10
2718 umount_client $MOUNT ||
2719 error "unmounting client failed with invalid llite param"
2720 mount_client $MOUNT ||
2721 error "mounting client failed with invalid llite param"
2723 do_facet mgs $LCTL conf_param $FSNAME.sys.some_wrong_param=20
2724 cleanup || error "stopping $FSNAME failed with invalid sys param"
2727 check_mount || error "client was not mounted with invalid sys param"
2728 cleanup || error "stopping $FSNAME failed with invalid sys param"
2730 run_test 42 "allow client/server mount/unmount with invalid config param"
2733 [[ $(lustre_version_code mgs) -ge $(version_code 2.5.58) ]] ||
2734 { skip "Need MDS version at least 2.5.58" && return 0; }
2735 [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
2738 USER1=$(cat /etc/passwd | grep :$ID1:$ID1: | cut -d: -f1)
2739 [ -z "$USER1" ] && skip_env "missing user with uid=$ID1 gid=$ID1" &&
2743 chmod ugo+x $DIR || error "chmod 0 failed"
2744 set_conf_param_and_check mds \
2745 "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
2746 "$FSNAME.mdt.root_squash" \
2748 wait_update $HOSTNAME \
2749 "$LCTL get_param -n llite.${FSNAME}*.root_squash" \
2751 error "check llite root_squash failed!"
2752 set_conf_param_and_check mds \
2753 "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
2754 "$FSNAME.mdt.nosquash_nids" \
2756 wait_update $HOSTNAME \
2757 "$LCTL get_param -n llite.${FSNAME}*.nosquash_nids" \
2759 error "check llite nosquash_nids failed!"
2762 # create set of test files
2764 echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
2765 chmod go-rw $DIR/$tfile-userfile || error "chmod 1 failed"
2766 chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
2768 echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
2769 chmod go-rw $DIR/$tfile-rootfile || error "chmod 2 faield"
2771 mkdir $DIR/$tdir-rootdir || error "mkdir failed"
2772 chmod go-rwx $DIR/$tdir-rootdir || error "chmod 3 failed"
2773 touch $DIR/$tdir-rootdir/tfile-1 || error "touch failed"
2775 echo "777" > $DIR/$tfile-user1file || error "write 7 failed"
2776 chmod go-rw $DIR/$tfile-user1file || error "chmod 7 failed"
2777 chown $ID1.$ID1 $DIR/$tfile-user1file || error "chown failed"
2780 # check root_squash:
2781 # set root squash UID:GID to RUNAS_ID
2782 # root should be able to access only files owned by RUNAS_ID
2784 set_conf_param_and_check mds \
2785 "$LCTL get_param -n mdt.$FSNAME-MDT0000.root_squash" \
2786 "$FSNAME.mdt.root_squash" \
2787 "$RUNAS_ID:$RUNAS_ID"
2788 wait_update $HOSTNAME \
2789 "$LCTL get_param -n llite.${FSNAME}*.root_squash" \
2790 "$RUNAS_ID:$RUNAS_ID" ||
2791 error "check llite root_squash failed!"
2793 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
2794 dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null ||
2795 error "$ST: root read permission is denied"
2796 echo "$ST: root read permission is granted - ok"
2799 dd conv=notrunc of=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null ||
2800 error "$ST: root write permission is denied"
2801 echo "$ST: root write permission is granted - ok"
2803 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
2804 dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null &&
2805 error "$ST: root read permission is granted"
2806 echo "$ST: root read permission is denied - ok"
2809 dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null &&
2810 error "$ST: root write permission is granted"
2811 echo "$ST: root write permission is denied - ok"
2813 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
2814 rm $DIR/$tdir-rootdir/tfile-1 1>/dev/null 2>/dev/null &&
2815 error "$ST: root unlink permission is granted"
2816 echo "$ST: root unlink permission is denied - ok"
2818 touch $DIR/tdir-rootdir/tfile-2 1>/dev/null 2>/dev/null &&
2819 error "$ST: root create permission is granted"
2820 echo "$ST: root create permission is denied - ok"
2823 # check root_squash is enforced independently
2824 # of client cache content
2826 # access file by USER1, keep access open
2827 # root should be denied access to user file
2829 runas -u $ID1 tail -f $DIR/$tfile-user1file 1>/dev/null 2>&1 &
2833 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-user1file)
2834 dd if=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
2835 { kill $pid; error "$ST: root read permission is granted"; }
2836 echo "$ST: root read permission is denied - ok"
2839 dd conv=notrunc of=$DIR/$tfile-user1file 1>/dev/null 2>&1 &&
2840 { kill $pid; error "$ST: root write permission is granted"; }
2841 echo "$ST: root write permission is denied - ok"
2847 # check nosquash_nids:
2848 # put client's NID into nosquash_nids list,
2849 # root should be able to access root file after that
2851 local NIDLIST=$($LCTL list_nids all | tr '\n' ' ')
2852 NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
2853 NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
2854 set_conf_param_and_check mds \
2855 "$LCTL get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
2856 "$FSNAME-MDTall.mdt.nosquash_nids" \
2858 wait_update $HOSTNAME \
2859 "$LCTL get_param -n llite.${FSNAME}*.nosquash_nids" \
2861 error "check llite nosquash_nids failed!"
2863 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
2864 dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null ||
2865 error "$ST: root read permission is denied"
2866 echo "$ST: root read permission is granted - ok"
2869 dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null ||
2870 error "$ST: root write permission is denied"
2871 echo "$ST: root write permission is granted - ok"
2873 ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
2874 rm $DIR/$tdir-rootdir/tfile-1 ||
2875 error "$ST: root unlink permission is denied"
2876 echo "$ST: root unlink permission is granted - ok"
2877 touch $DIR/$tdir-rootdir/tfile-2 ||
2878 error "$ST: root create permission is denied"
2879 echo "$ST: root create permission is granted - ok"
2881 run_test 43 "check root_squash and nosquash_nids"
2883 umount_client $MOUNT
2888 check_mount || error "check_mount"
2889 UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
2891 UUIDS=$(do_facet $SINGLEMDS "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
2892 for VAL in $UUIDS; do
2893 NID=$(echo $VAL | cut -d= -f1)
2894 CLUUID=$(echo $VAL | cut -d= -f2)
2895 [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
2897 [ "$STATS_FOUND" = "no" ] && error "stats not found for client"
2898 cleanup || error "cleanup failed with $?"
2900 run_test 44 "mounted client proc entry exists"
2904 check_mount || error "check_mount"
2905 stop_mds || error "Unable to stop MDS"
2909 #define OBD_FAIL_PTLRPC_LONG_UNLINK 0x50f
2910 do_facet client "$LCTL set_param fail_loc=0x50f"
2913 manual_umount_client --force || error "manual_umount_client failed"
2914 do_facet client "$LCTL set_param fail_loc=0x0"
2915 start_mds || error "unable to start MDS"
2916 mount_client $MOUNT || error "mount_client $MOUNT failed"
2917 cleanup || error "cleanup failed with $?"
2919 run_test 45 "long unlink handling in ptlrpcd"
2926 umount_client $MOUNT2 || rc=$?
2927 umount_client $MOUNT || rc=$?
2928 while [ $count -gt 0 ]; do
2929 stop ost${count} -f || rc=$?
2933 cleanup_nocli || rc=$?
2934 #writeconf to remove all ost2 traces for subsequent tests
2935 writeconf_or_reformat
2940 echo "Testing with $OSTCOUNT OSTs"
2942 start_mds || error "unable to start MDS"
2943 #first client should see only one ost
2944 start_ost || error "Unable to start OST1"
2945 wait_osc_import_state mds ost FULL
2947 mount_client $MOUNT || error "mount_client $MOUNT failed"
2948 trap "cleanup_46a $OSTCOUNT" EXIT ERR
2951 for (( i=2; i<=$OSTCOUNT; i++ )); do
2952 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
2953 error "start_ost$i $(ostdevname $i) failed"
2956 # wait until osts in sync
2957 for (( i=2; i<=$OSTCOUNT; i++ )); do
2958 wait_osc_import_state mds ost$i FULL
2959 wait_osc_import_state client ost$i FULL
2962 #second client see all ost's
2964 mount_client $MOUNT2 || error "mount_client failed"
2965 $SETSTRIPE -c -1 $MOUNT2 || error "$SETSTRIPE -c -1 $MOUNT2 failed"
2966 $GETSTRIPE $MOUNT2 || error "$GETSTRIPE $MOUNT2 failed"
2968 echo "ok" > $MOUNT2/widestripe
2969 $GETSTRIPE $MOUNT2/widestripe ||
2970 error "$GETSTRIPE $MOUNT2/widestripe failed"
2971 # fill acl buffer for avoid expand lsm to them
2972 awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd |
2974 setfacl -m $acl $MOUNT2/widestripe
2978 stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
2980 cleanup_46a $OSTCOUNT || error "cleanup_46a failed"
2982 run_test 46a "handle ost additional - wide striped file"
2987 check_mount || error "check_mount failed"
2988 $LCTL set_param ldlm.namespaces.$FSNAME-*-*-*.lru_size=100
2992 for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
2993 if echo $ns | grep "MDT[[:digit:]]*"; then
2996 lrs=$(echo $ns | sed 's/.*lru_size=//')
2997 lru_size[count]=$lrs
3002 facet_failover $SINGLEMDS
3003 client_up || error "client_up failed"
3006 for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
3007 if echo $ns | grep "MDT[[:digit:]]*"; then
3010 lrs=$(echo $ns | sed 's/.*lru_size=//')
3011 if ! test "$lrs" -eq "${lru_size[count]}"; then
3012 n=$(echo $ns | sed -e 's/ldlm.namespaces.//' -e 's/.lru_size=.*//')
3013 error "$n has lost lru_size: $lrs vs. ${lru_size[count]}"
3018 cleanup || error "cleanup failed with $?"
3020 run_test 47 "server restart does not make client loss lru_resize settings"
3025 # reformat after this test is needed - if the test fails,
3026 # we will have unkillable file at FS
3030 test_48() { # bug 17636
3033 check_mount || error "check_mount failed"
3035 $SETSTRIPE -c -1 $MOUNT || error "$SETSTRIPE -c -1 $MOUNT failed"
3036 $GETSTRIPE $MOUNT || error "$GETSTRIPE $MOUNT failed"
3038 echo "ok" > $MOUNT/widestripe
3039 $GETSTRIPE $MOUNT/widestripe ||
3040 error "$GETSTRIPE $MOUNT/widestripe failed"
3042 trap cleanup_48 EXIT ERR
3044 # fill acl buffer for avoid expand lsm to them
3045 getent passwd | awk -F : '{ print "u:"$1":rwx" }' | while read acl; do
3046 setfacl -m $acl $MOUNT/widestripe
3049 stat $MOUNT/widestripe || error "stat $MOUNT/widestripe failed"
3053 run_test 48 "too many acls on file"
3055 # check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
3056 test_49a() { # bug 17710
3057 local timeout_orig=$TIMEOUT
3058 local ldlm_timeout_orig=$LDLM_TIMEOUT
3059 local LOCAL_TIMEOUT=20
3061 LDLM_TIMEOUT=$LOCAL_TIMEOUT
3062 TIMEOUT=$LOCAL_TIMEOUT
3066 check_mount || error "client mount failed"
3068 echo "check ldlm_timout..."
3069 local LDLM_MDS="$(do_facet $SINGLEMDS $LCTL get_param -n ldlm_timeout)"
3070 local LDLM_OST1="$(do_facet ost1 $LCTL get_param -n ldlm_timeout)"
3071 local LDLM_CLIENT="$(do_facet client $LCTL get_param -n ldlm_timeout)"
3073 if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
3074 error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
3077 if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT / 3)) ]; then
3078 error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT / 3))"
3081 umount_client $MOUNT || error "umount_client $MOUNT failed"
3082 stop_ost || error "problem stopping OSS"
3083 stop_mds || error "problem stopping MDS"
3085 LDLM_TIMEOUT=$ldlm_timeout_orig
3086 TIMEOUT=$timeout_orig
3088 run_test 49a "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
3090 test_49b() { # bug 17710
3091 local timeout_orig=$TIMEOUT
3092 local ldlm_timeout_orig=$LDLM_TIMEOUT
3093 local LOCAL_TIMEOUT=20
3095 LDLM_TIMEOUT=$((LOCAL_TIMEOUT - 1))
3096 TIMEOUT=$LOCAL_TIMEOUT
3100 check_mount || error "client mount failed"
3102 local LDLM_MDS="$(do_facet $SINGLEMDS $LCTL get_param -n ldlm_timeout)"
3103 local LDLM_OST1="$(do_facet ost1 $LCTL get_param -n ldlm_timeout)"
3104 local LDLM_CLIENT="$(do_facet client $LCTL get_param -n ldlm_timeout)"
3106 if [ $LDLM_MDS -ne $LDLM_OST1 -o $LDLM_MDS -ne $LDLM_CLIENT ]; then
3107 error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
3110 if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT - 1)) ]; then
3111 error "LDLM_TIMEOUT($LDLM_MDS) is not $((LOCAL_TIMEOUT - 1))"
3114 cleanup || error "cleanup failed"
3116 LDLM_TIMEOUT=$ldlm_timeout_orig
3117 TIMEOUT=$timeout_orig
3119 run_test 49b "check PARAM_SYS_LDLM_TIMEOUT option of mkfs.lustre"
3122 # Test both statfs and lfs df and fail if either one fails
3123 multiop_bg_pause $1 f_
3126 killall -USR1 multiop
3127 [ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
3128 wait $PID || { RC1=$?; log "multiop return error "; }
3135 if [ $RC2 -eq 0 ]; then
3137 log "lazystatfs df failed"
3141 [[ $RC1 -ne 0 || $RC2 -eq 0 ]] && RC=1
3147 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3148 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3150 lazystatfs $MOUNT || error "lazystatfs failed but no down servers"
3152 cleanup || error "cleanup failed with rc $?"
3154 run_test 50a "lazystatfs all servers available"
3158 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3159 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3161 # Wait for client to detect down OST
3162 stop_ost || error "Unable to stop OST1"
3163 wait_osc_import_state mds ost DISCONN
3165 lazystatfs $MOUNT || error "lazystatfs should not return EIO"
3167 umount_client $MOUNT || error "Unable to unmount client"
3168 stop_mds || error "Unable to stop MDS"
3170 run_test 50b "lazystatfs all servers down"
3173 start_mds || error "Unable to start MDS"
3174 start_ost || error "Unable to start OST1"
3175 start_ost2 || error "Unable to start OST2"
3176 mount_client $MOUNT || error "Unable to mount client"
3177 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3178 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3180 # Wait for client to detect down OST
3181 stop_ost || error "Unable to stop OST1"
3182 wait_osc_import_state mds ost DISCONN
3183 lazystatfs $MOUNT || error "lazystatfs failed with one down server"
3185 umount_client $MOUNT || error "Unable to unmount client"
3186 stop_ost2 || error "Unable to stop OST2"
3187 stop_mds || error "Unable to stop MDS"
3188 #writeconf to remove all ost2 traces for subsequent tests
3189 writeconf_or_reformat
3191 run_test 50c "lazystatfs one server down"
3194 start_mds || error "Unable to start MDS"
3195 start_ost || error "Unable to start OST1"
3196 start_ost2 || error "Unable to start OST2"
3197 mount_client $MOUNT || error "Unable to mount client"
3198 $LCTL set_param llite.$FSNAME-*.lazystatfs=1
3199 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
3201 # Issue the statfs during the window where the client still
3202 # belives the OST to be available but it is in fact down.
3203 # No failure just a statfs which hangs for a timeout interval.
3204 stop_ost || error "Unable to stop OST1"
3205 lazystatfs $MOUNT || error "lazystatfs failed with one down server"
3207 umount_client $MOUNT || error "Unable to unmount client"
3208 stop_ost2 || error "Unable to stop OST2"
3209 stop_mds || error "Unable to stop MDS"
3210 #writeconf to remove all ost2 traces for subsequent tests
3211 writeconf_or_reformat
3213 run_test 50d "lazystatfs client/server conn race"
3220 start_mds || error "Unable to start MDS"
3221 #first client should see only one ost
3222 start_ost || error "Unable to start OST1"
3223 wait_osc_import_state mds ost FULL
3225 # Wait for client to detect down OST
3226 stop_ost || error "Unable to stop OST1"
3227 wait_osc_import_state mds ost DISCONN
3229 mount_client $MOUNT || error "Unable to mount client"
3230 $LCTL set_param llite.$FSNAME-*.lazystatfs=0
3232 multiop_bg_pause $MOUNT _f
3236 if [ $RC1 -ne 0 ]; then
3237 log "multiop failed $RC1"
3240 sleep $(( $TIMEOUT+1 ))
3242 [ $? -ne 0 ] && error "process isn't sleep"
3243 start_ost || error "Unable to start OST1"
3244 wait $pid || error "statfs failed"
3247 umount_client $MOUNT || error "Unable to unmount client"
3248 stop_ost || error "Unable to stop OST1"
3249 stop_mds || error "Unable to stop MDS"
3251 run_test 50e "normal statfs all servers down"
3256 CONN_PROC="osc.$FSNAME-OST0001-osc-[M]*.ost_server_uuid"
3258 start_mds || error "Unable to start mds"
3259 #first client should see only one ost
3260 start_ost || error "Unable to start OST1"
3261 wait_osc_import_state mds ost FULL
3263 start_ost2 || error "Unable to start OST2"
3264 wait_osc_import_state mds ost2 FULL
3266 # Wait for client to detect down OST
3267 stop_ost2 || error "Unable to stop OST2"
3269 wait_osc_import_state mds ost2 DISCONN
3270 mount_client $MOUNT || error "Unable to mount client"
3271 $LCTL set_param llite.$FSNAME-*.lazystatfs=0
3273 multiop_bg_pause $MOUNT _f
3277 if [ $RC1 -ne 0 ]; then
3278 log "lazystatfs multiop failed $RC1"
3281 sleep $(( $TIMEOUT+1 ))
3283 [ $? -ne 0 ] && error "process isn't sleep"
3284 start_ost2 || error "Unable to start OST2"
3285 wait $pid || error "statfs failed"
3286 stop_ost2 || error "Unable to stop OST2"
3289 umount_client $MOUNT || error "Unable to unmount client"
3290 stop_ost || error "Unable to stop OST1"
3291 stop_mds || error "Unable to stop MDS"
3292 #writeconf to remove all ost2 traces for subsequent tests
3293 writeconf_or_reformat
3295 run_test 50f "normal statfs one server in down"
3298 [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
3300 start_ost2 || error "Unable to start OST2"
3301 wait_osc_import_state mds ost2 FULL
3302 wait_osc_import_state client ost2 FULL
3304 local PARAM="${FSNAME}-OST0001.osc.active"
3306 $SETSTRIPE -c -1 $DIR/$tfile || error "$SETSTRIPE failed"
3307 do_facet mgs $LCTL conf_param $PARAM=0 ||
3308 error "Unable to deactivate OST"
3310 umount_client $MOUNT || error "Unable to unmount client"
3311 mount_client $MOUNT || error "Unable to mount client"
3312 # This df should not cause a panic
3315 do_facet mgs $LCTL conf_param $PARAM=1 || error "Unable to activate OST"
3316 rm -f $DIR/$tfile || error "unable to remove file $DIR/$tfile"
3317 umount_client $MOUNT || error "Unable to unmount client"
3318 stop_ost2 || error "Unable to stop OST2"
3319 stop_ost || error "Unable to stop OST1"
3320 stop_mds || error "Unable to stop MDS"
3321 #writeconf to remove all ost2 traces for subsequent tests
3322 writeconf_or_reformat
3324 run_test 50g "deactivated OST should not cause panic"
3328 # prepare MDT/OST, make OSC inactive for OST1
3329 [ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
3331 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
3332 do_facet ost1 "$TUNEFS --param osc.active=0 `ostdevname 1`" ||
3333 error "tunefs OST1 failed"
3334 start_mds || error "Unable to start MDT"
3335 start_ost || error "Unable to start OST1"
3336 start_ost2 || error "Unable to start OST2"
3337 mount_client $MOUNT || error "client start failed"
3339 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
3341 # activatate OSC for OST1
3342 local TEST="$LCTL get_param -n osc.${FSNAME}-OST0000-osc-[!M]*.active"
3343 set_conf_param_and_check client \
3344 "$TEST" "${FSNAME}-OST0000.osc.active" 1 ||
3345 error "Unable to activate OST1"
3347 mkdir $DIR/$tdir/2 || error "mkdir $DIR/$tdir/2 failed"
3348 $SETSTRIPE -c -1 -i 0 $DIR/$tdir/2 ||
3349 error "$SETSTRIPE $DIR/$tdir/2 failed"
3350 sleep 1 && echo "create a file after OST1 is activated"
3352 createmany -o $DIR/$tdir/2/$tfile-%d 1
3354 # check OSC import is working
3355 stat $DIR/$tdir/2/* >/dev/null 2>&1 ||
3356 error "some OSC imports are still not connected"
3359 umount_client $MOUNT || error "Unable to umount client"
3360 stop_ost2 || error "Unable to stop OST2"
3361 cleanup_nocli || error "cleanup_nocli failed with $?"
3363 run_test 50h "LU-642: activate deactivated OST"
3366 local LOCAL_TIMEOUT=20
3370 check_mount || error "check_mount failed"
3372 mkdir $MOUNT/$tdir || error "mkdir $MOUNT/$tdir failed"
3373 $SETSTRIPE -c -1 $MOUNT/$tdir ||
3374 error "$SETSTRIPE -c -1 $MOUNT/$tdir failed"
3375 #define OBD_FAIL_MDS_REINT_DELAY 0x142
3376 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x142"
3377 touch $MOUNT/$tdir/$tfile &
3380 start_ost2 || error "Unable to start OST1"
3382 stop_ost2 || error "Unable to stop OST1"
3383 cleanup || error "cleanup failed with $?"
3384 #writeconf to remove all ost2 traces for subsequent tests
3385 writeconf_or_reformat
3387 run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
3396 do_node $node mkdir -p $dest
3397 [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
3399 do_node $node 'tar cf - '$@' | tar xf - -C '$dest';
3400 [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
3401 [ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
3403 do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
3404 [ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
3414 local backup2=${TMP}/backup2
3416 do_node $node mkdir -p $backup2
3417 [ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
3419 do_node $node 'tar cf - '$@' | tar xf - -C '$backup2';
3420 [ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
3421 [ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
3423 do_node $node "diff -rq $backup $backup2"
3424 [ $? -eq 0 ] || { error "contents differ"; return 3; }
3426 local xattrs2=${TMP}/xattrs2
3427 do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
3428 [ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
3430 do_node $node "diff $xattrs $xattrs2"
3431 [ $? -eq 0 ] || { error "xattrs differ"; return 5; }
3433 do_node $node "rm -rf $backup2 $xattrs2"
3434 [ $? -eq 0 ] || { error "Unable to delete temporary files"; return 6; }
3438 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3439 skip "Only applicable to ldiskfs-based MDTs"
3443 start_mds || error "Unable to start MDS"
3444 start_ost || error "Unable to start OST1"
3445 mount_client $MOUNT || error "Unable to mount client"
3448 local ost1mnt=$(facet_mntpt ost1)
3449 local ost1node=$(facet_active_host ost1)
3450 local ost1tmp=$TMP/conf52
3453 mkdir $DIR/$tdir || error "Unable to create $DIR/$tdir"
3454 touch $TMP/modified_first || error "Unable to create temporary file"
3455 local mtime=$(stat -c %Y $TMP/modified_first)
3456 do_node $ost1node "mkdir -p $ost1tmp &&
3457 touch -m -d @$mtime $ost1tmp/modified_first" ||
3458 error "Unable to create temporary file"
3461 $SETSTRIPE -c -1 -S 1M $DIR/$tdir || error "$SETSTRIPE failed"
3463 for (( i=0; i < nrfiles; i++ )); do
3464 multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c ||
3465 error "multiop failed"
3471 echo backup files to $TMP/files
3472 local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
3473 copy_files_xattrs $(hostname) $TMP/files $TMP/file_xattrs $files ||
3474 error "Unable to copy files"
3476 umount_client $MOUNT || error "Unable to umount client"
3477 stop_ost || error "Unable to stop ost1"
3479 echo mount ost1 as ldiskfs
3480 do_node $ost1node mkdir -p $ost1mnt || error "Unable to create $ost1mnt"
3481 if ! do_node $ost1node test -b $ost1_dev; then
3484 do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
3486 error "Unable to mount ost1 as ldiskfs"
3489 echo backup objects to $ost1tmp/objects
3490 local objects=$(do_node $ost1node 'find '$ost1mnt'/O/[0-9]* -type f'\
3491 '-size +0 -newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
3492 copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs \
3494 error "Unable to copy objects"
3496 # move objects to lost+found
3497 do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
3498 [ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
3500 # recover objects dry-run
3501 echo "ll_recover_lost_found_objs dry_run"
3502 do_node $ost1node "ll_recover_lost_found_objs -n -d $ost1mnt/O" ||
3503 error "ll_recover_lost_found_objs failed"
3506 echo "ll_recover_lost_found_objs fix run"
3507 do_node $ost1node "ll_recover_lost_found_objs -d $ost1mnt/lost+found" ||
3508 error "ll_recover_lost_found_objs failed"
3510 # compare restored objects against saved ones
3511 diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
3512 [ $? -eq 0 ] || error "Unable to diff objects"
3514 do_node $ost1node "umount $ost1mnt" ||
3515 error "Unable to umount ost1 as ldiskfs"
3517 start_ost || error "Unable to start OST1"
3518 mount_client $MOUNT || error "Unable to mount client"
3521 diff_files_xattrs $(hostname) $TMP/files $TMP/file_xattrs $files ||
3522 error "Unable to diff files"
3524 rm -rf $TMP/files $TMP/file_xattrs ||
3525 error "Unable to delete temporary files"
3526 do_node $ost1node "rm -rf $ost1tmp" ||
3527 error "Unable to delete temporary files"
3528 cleanup || error "cleanup failed with $?"
3530 run_test 52 "check recovering objects from lost+found"
3532 # Checks threads_min/max/started for some service
3534 # Arguments: service name (OST or MDT), facet (e.g., ost1, $SINGLEMDS), and a
3535 # parameter pattern prefix like 'ost.*.ost'.
3548 local msg="Insane $modname thread counts"
3549 local ncpts=$(check_cpt_number $facet)
3553 check_mount || return 41
3555 # We need to expand $parampat, but it may match multiple parameters, so
3556 # we'll pick the first one
3557 if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
3558 error "Couldn't expand ${parampat}.threads_min parameter name"
3562 # Remove the .threads_min part
3563 paramp=${paramp%.threads_min}
3565 # Check for sanity in defaults
3566 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
3568 tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
3570 tstarted=$(do_facet $facet "$LCTL get_param \
3571 -n ${paramp}.threads_started" || echo 0)
3572 lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' ||
3574 lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' ||
3576 nthrs=$(expr $tmax - $tmin)
3577 if [ $nthrs -lt $ncpts ]; then
3583 [ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
3584 skip_env "module parameter forced $facet thread count" &&
3585 tmin=3 && tmax=$((3 * tmax))
3587 # Check that we can change min/max
3588 do_facet $facet "$LCTL set_param \
3589 ${paramp}.threads_min=$((tmin + nthrs))"
3590 do_facet $facet "$LCTL set_param \
3591 ${paramp}.threads_max=$((tmax - nthrs))"
3592 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
3594 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
3596 lassert 25 "$msg" '(($tmin2 == ($tmin + $nthrs) &&
3597 $tmax2 == ($tmax - $nthrs)))' || return $?
3599 # Check that we can set min/max to the same value
3600 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
3602 do_facet $facet "$LCTL set_param ${paramp}.threads_max=$tmin"
3603 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
3605 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
3607 lassert 26 "$msg" '(($tmin2 == $tmin && $tmax2 == $tmin))' || return $?
3609 # Check that we can't set max < min
3610 do_facet $facet "$LCTL set_param ${paramp}.threads_max=$((tmin - 1))"
3611 tmin2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min" ||
3613 tmax2=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max" ||
3615 lassert 27 "$msg" '(($tmin2 <= $tmax2))' || return $?
3617 # We need to ensure that we get the module options desired; to do this
3618 # we set LOAD_MODULES_REMOTE=true and we call setmodopts below.
3619 LOAD_MODULES_REMOTE=true
3622 local newvalue="${opts}=$(expr $basethr \* $ncpts)"
3623 setmodopts -a $modname "$newvalue" oldvalue
3627 check_mount || return 41
3629 # Restore previous setting of MODOPTS_*
3630 setmodopts $modname "$oldvalue"
3632 # Check that $opts took
3633 tmin=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_min")
3634 tmax=$(do_facet $facet "$LCTL get_param -n ${paramp}.threads_max")
3635 tstarted=$(do_facet $facet \
3636 "$LCTL get_param -n ${paramp}.threads_started")
3637 lassert 28 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' ||
3647 thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads' '16'
3648 cleanup || error "cleanup failed with rc $?"
3650 run_test 53a "check OSS thread count params"
3654 local mds=$(do_facet $SINGLEMDS "$LCTL get_param \
3655 -N mds.*.*.threads_max 2>/dev/null")
3656 if [ -z "$mds" ]; then
3657 #running this on an old MDT
3658 thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' 16
3660 thread_sanity MDT $SINGLEMDS 'mds.*.*.' 'mds_num_threads' 16
3662 cleanup || error "cleanup failed with $?"
3664 run_test 53b "check MDS thread count params"
3667 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3668 skip "Only applicable to ldiskfs-based MDTs"
3672 do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p ||
3673 error "llverdev failed with rc=$?"
3676 run_test 54a "test llverdev and partial verify of device"
3679 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3680 skip "Only applicable to ldiskfs-based MDTs"
3685 run_llverfs $MOUNT -p || error "llverfs failed with rc=$?"
3686 cleanup || error "cleanup failed with rc=$?"
3688 run_test 54b "test llverfs and partial verify of filesystem"
3692 local max_ost_index=$1
3693 echo -n $(((max_ost_index + 1) * 8))
3697 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3698 skip "Only applicable to ldiskfs-based MDTs"
3702 local mdsdev=$(mdsdevname 1)
3703 local mdsvdev=$(mdsvdevname 1)
3707 add mds1 $(mkfs_opts mds1 ${mdsdev}) --reformat $mdsdev \
3709 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
3710 --reformat $(ostdevname 1) $(ostvdevname 1)
3716 echo checking size of lov_objid for ost index $i
3717 LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" | grep ^User | awk '{print $6}')
3718 if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
3719 error "lov_objid size has to be $(lov_objid_size $i), not $LOV_OBJID_SIZE"
3721 echo ok, lov_objid size is correct: $LOV_OBJID_SIZE
3728 run_test 55 "check lov_objid size"
3731 local server_version=$(lustre_version_code $SINGLEMDS)
3732 local mds_journal_size_orig=$MDSJOURNALSIZE
3737 for num in $(seq 1 $MDSCOUNT); do
3738 add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
3739 --reformat $(mdsdevname $num) $(mdsvdevname $num)
3741 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=10000 --reformat \
3742 $(ostdevname 1) $(ostvdevname 1)
3743 add ost2 $(mkfs_opts ost2 $(ostdevname 2)) --index=1000 --reformat \
3744 $(ostdevname 2) $(ostvdevname 2)
3747 start_ost || error "Unable to start first ost (idx 10000)"
3748 start_ost2 || error "Unable to start second ost (idx 1000)"
3749 mount_client $MOUNT || error "Unable to mount client"
3753 if [[ $server_version -ge $(version_code 2.6.54) ]] ||
3754 [[ $server_version -ge $(version_code 2.5.4) &&
3755 $server_version -lt $(version_code 2.5.11) ]]; then
3756 wait_osc_import_state mds ost1 FULL
3757 wait_osc_import_state mds ost2 FULL
3758 $SETSTRIPE --stripe-count=-1 $DIR/$tfile ||
3759 error "Unable to setstripe $DIR/$tfile"
3760 n=$($LFS getstripe --stripe-count $DIR/$tfile)
3761 [ "$n" -eq 2 ] || error "Stripe count not two: $n"
3766 MDSJOURNALSIZE=$mds_journal_size_orig
3769 run_test 56 "check big OST indexes and out-of-index-order start"
3771 test_57a() { # bug 22656
3772 do_rpc_nodes $(facet_active_host ost1) load_modules_local
3773 local NID=$(do_facet ost1 "$LCTL get_param nis" |
3774 tail -1 | awk '{print $1}')
3775 writeconf_or_reformat
3776 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
3777 do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" ||
3778 error "tunefs failed"
3780 start_ost && error "OST registration from failnode should fail"
3783 run_test 57a "initial registration from failnode should fail (should return errs)"
3786 do_rpc_nodes $(facet_active_host ost1) load_modules_local
3787 local NID=$(do_facet ost1 "$LCTL get_param nis" |
3788 tail -1 | awk '{print $1}')
3789 writeconf_or_reformat
3790 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
3791 do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" ||
3792 error "tunefs failed"
3794 start_ost || error "OST registration from servicenode should not fail"
3797 run_test 57b "initial registration from servicenode should not fail"
3800 do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
3803 test_58() { # bug 22658
3805 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
3806 createmany -o $DIR/$tdir/$tfile-%d 100
3807 # make sure that OSTs do not cancel llog cookies before we unmount the MDS
3808 #define OBD_FAIL_OBD_LOG_CANCEL_NET 0x601
3809 do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x601"
3810 unlinkmany $DIR/$tdir/$tfile-%d 100
3811 stop_mds || error "Unable to stop MDS"
3813 local MNTDIR=$(facet_mntpt $SINGLEMDS)
3814 local devname=$(mdsdevname ${SINGLEMDS//mds/})
3816 # remove all files from the OBJECTS dir
3817 mount_fstype $SINGLEMDS
3819 do_facet $SINGLEMDS "find $MNTDIR/O/1/d* -type f -delete"
3821 unmount_fstype $SINGLEMDS
3822 # restart MDS with missing llog files
3823 start_mds || error "unable to start MDS"
3824 do_facet mds "$LCTL set_param fail_loc=0"
3827 run_test 58 "missing llog files must not prevent MDT from mounting"
3830 start_mgsmds >> /dev/null
3831 local C1=$(count_osts)
3832 if [ $C1 -eq 0 ]; then
3833 start_ost >> /dev/null
3837 echo "original ost count: $C1 (expect > 0)"
3838 [ $C1 -gt 0 ] || error "No OSTs in $FSNAME log"
3839 start_mgsmds -o writeconf >> /dev/null || error "MDT start failed"
3840 local C2=$(count_osts)
3841 echo "after mdt writeconf count: $C2 (expect 0)"
3842 [ $C2 -gt 0 ] && error "MDT writeconf should erase OST logs"
3843 echo "OST start without writeconf should fail:"
3844 start_ost >> /dev/null &&
3845 error "OST start without writeconf didn't fail"
3846 echo "OST start with writeconf should succeed:"
3847 start_ost -o writeconf >> /dev/null || error "OST1 start failed"
3848 local C3=$(count_osts)
3849 echo "after ost writeconf count: $C3 (expect 1)"
3850 [ $C3 -eq 1 ] || error "new OST writeconf should add:"
3851 start_ost2 -o writeconf >> /dev/null || error "OST2 start failed"
3852 local C4=$(count_osts)
3853 echo "after ost2 writeconf count: $C4 (expect 2)"
3854 [ $C4 -eq 2 ] || error "OST2 writeconf should add log"
3855 stop_ost2 >> /dev/null
3856 cleanup_nocli >> /dev/null
3857 #writeconf to remove all ost2 traces for subsequent tests
3858 writeconf_or_reformat
3860 run_test 59 "writeconf mount option"
3862 test_60() { # LU-471
3865 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3866 skip "Only applicable to ldiskfs-based MDTs"
3870 for num in $(seq $MDSCOUNT); do
3871 add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
3872 --mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' \
3873 --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
3877 dump=$(do_facet $SINGLEMDS dumpe2fs $(mdsdevname 1))
3878 [ ${PIPESTATUS[0]} -eq 0 ] || error "dumpe2fs $(mdsdevname 1) failed"
3880 # MDT default has dirdata feature
3881 echo $dump | grep dirdata > /dev/null || error "dirdata is not set"
3882 # we disable uninit_bg feature
3883 echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
3884 # we set stride extended options
3885 echo $dump | grep stride > /dev/null || error "stride is not set"
3888 run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
3891 local reformat=false
3893 [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
3894 { skip "Need MDS version at least 2.1.53"; return 0; }
3896 if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
3897 ! large_xattr_enabled; then
3899 LDISKFS_MKFS_OPTS+=" -O large_xattr"
3901 for num in $(seq $MDSCOUNT); do
3902 add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
3903 --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
3904 error "add mds $num failed"
3908 setup_noconfig || error "setting up the filesystem failed"
3909 client_up || error "starting client failed"
3911 local file=$DIR/$tfile
3912 touch $file || error "touch $file failed"
3914 local large_value="$(generate_string $(max_xattr_size))"
3915 local small_value="bar"
3917 local name="trusted.big"
3918 log "save large xattr $name on $file"
3919 setfattr -n $name -v $large_value $file ||
3920 error "saving $name on $file failed"
3922 local new_value=$(get_xattr_value $name $file)
3923 [[ "$new_value" != "$large_value" ]] &&
3924 error "$name different after saving"
3926 log "shrink value of $name on $file"
3927 setfattr -n $name -v $small_value $file ||
3928 error "shrinking value of $name on $file failed"
3930 new_value=$(get_xattr_value $name $file)
3931 [[ "$new_value" != "$small_value" ]] &&
3932 error "$name different after shrinking"
3934 log "grow value of $name on $file"
3935 setfattr -n $name -v $large_value $file ||
3936 error "growing value of $name on $file failed"
3938 new_value=$(get_xattr_value $name $file)
3939 [[ "$new_value" != "$large_value" ]] &&
3940 error "$name different after growing"
3942 log "check value of $name on $file after remounting MDS"
3944 new_value=$(get_xattr_value $name $file)
3945 [[ "$new_value" != "$large_value" ]] &&
3946 error "$name different after remounting MDS"
3948 log "remove large xattr $name from $file"
3949 setfattr -x $name $file || error "removing $name from $file failed"
3954 LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS% -O large_xattr}
3958 run_test 61 "large xattr"
3961 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3962 skip "Only applicable to ldiskfs-based MDTs"
3967 local mdsdev=$(mdsdevname 1)
3968 local ostdev=$(ostdevname 1)
3970 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
3971 { skip "Need MDS version at least 2.2.51"; return 0; }
3973 echo "disable journal for mds"
3974 do_facet mds tune2fs -O ^has_journal $mdsdev || error "tune2fs failed"
3975 start_mds && error "MDT start should fail"
3976 echo "disable journal for ost"
3977 do_facet ost1 tune2fs -O ^has_journal $ostdev || error "tune2fs failed"
3978 start_ost && error "OST start should fail"
3979 cleanup || error "cleanup failed with rc $?"
3982 run_test 62 "start with disabled journal"
3985 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
3986 skip "Only applicable to ldiskfs-based MDTs"
3990 local inode_slab=$(do_facet $SINGLEMDS \
3991 "awk '/ldiskfs_inode_cache/ { print \\\$5 }' /proc/slabinfo")
3992 if [ -z "$inode_slab" ]; then
3993 skip "ldiskfs module has not been loaded"
3997 echo "$inode_slab ldisk inodes per page"
3998 [ "$inode_slab" -ge "3" ] ||
3999 error "ldisk inode size is too big, $inode_slab objs per page"
4002 run_test 63 "Verify each page can at least hold 3 ldisk inodes"
4005 start_mds || error "unable to start MDS"
4006 start_ost || error "Unable to start OST1"
4007 start_ost2 || error "Unable to start second ost"
4008 mount_client $MOUNT || error "Unable to mount client"
4009 stop_ost2 || error "Unable to stop second ost"
4011 $LFS df --lazy || error "lfs df failed"
4012 cleanup || error "cleanup failed with $?"
4013 #writeconf to remove all ost2 traces for subsequent tests
4014 writeconf_or_reformat
4016 run_test 64 "check lfs df --lazy "
4018 test_65() { # LU-2237
4019 # Currently, the test is only valid for ldiskfs backend
4020 [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
4021 skip "non-ldiskfs backend" && return
4023 local devname=$(mdsdevname ${SINGLEMDS//mds/})
4024 local brpt=$(facet_mntpt brpt)
4027 if ! do_facet $SINGLEMDS "test -b $devname"; then
4031 stop_mds || error "Unable to stop MDS"
4032 local obj=$(do_facet $SINGLEMDS \
4033 "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" |
4035 if [ -z "$obj" ]; then
4036 # The MDT may be just re-formatted, mount the MDT for the
4037 # first time to guarantee the "last_rcvd" file is there.
4038 start_mds || error "fail to mount the MDS for the first time"
4039 stop_mds || error "Unable to stop MDS"
4042 # remove the "last_rcvd" file
4043 do_facet $SINGLEMDS "mkdir -p $brpt"
4044 do_facet $SINGLEMDS \
4045 "mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
4046 do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
4047 do_facet $SINGLEMDS "umount -d $brpt"
4049 # restart MDS, the "last_rcvd" file should be recreated.
4050 start_mds || error "fail to restart the MDS"
4051 stop_mds || error "Unable to stop MDS"
4052 obj=$(do_facet $SINGLEMDS \
4053 "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" | grep Inode)
4054 [ -n "$obj" ] || error "fail to re-create the last_rcvd"
4056 run_test 65 "re-create the lost last_rcvd file when server mount"
4059 [[ $(lustre_version_code mgs) -ge $(version_code 2.3.59) ]] ||
4060 { skip "Need MGS version at least 2.3.59"; return 0; }
4063 local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
4064 local MDS_NID=$(do_facet $SINGLEMDS $LCTL list_nids | head -1)
4066 echo "replace_nids should fail if MDS, OSTs and clients are UP"
4067 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4068 error "replace_nids fail"
4070 umount_client $MOUNT || error "unmounting client failed"
4071 echo "replace_nids should fail if MDS and OSTs are UP"
4072 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4073 error "replace_nids fail"
4075 stop_ost || error "Unable to stop OST1"
4076 echo "replace_nids should fail if MDS is UP"
4077 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
4078 error "replace_nids fail"
4080 stop_mds || error "stopping mds failed"
4082 if combined_mgs_mds; then
4083 start_mdt 1 "-o nosvc" ||
4084 error "starting mds with nosvc option failed"
4087 echo "command should accept two parameters"
4088 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 &&
4089 error "command should accept two params"
4091 echo "correct device name should be passed"
4092 do_facet mgs $LCTL replace_nids $FSNAME-WRONG0000 $OST1_NID &&
4093 error "wrong devname"
4095 echo "wrong nids list should not destroy the system"
4096 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "wrong nids list" &&
4099 echo "replace OST nid"
4100 do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID ||
4101 error "replace nids failed"
4103 echo "command should accept two parameters"
4104 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 &&
4105 error "command should accept two params"
4107 echo "wrong nids list should not destroy the system"
4108 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 "wrong nids list" &&
4111 echo "replace MDS nid"
4112 do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $MDS_NID ||
4113 error "replace nids failed"
4115 if ! combined_mgs_mds ; then
4118 stop_mds || error "Unable to stop MDS"
4122 check_mount || error "error after nid replace"
4123 cleanup || error "cleanup failed"
4126 run_test 66 "replace nids"
4128 test_67() { #LU-2950
4129 local legacy="$TMP/legacy_lnet_config"
4130 local new="$TMP/new_routes_test"
4131 local out="$TMP/config_out_file"
4132 local verify="$TMP/conv_verify"
4133 local verify_conf="$TMP/conf_verify"
4135 # Create the legacy file that will be run through the
4136 # lustre_routes_conversion script
4137 cat <<- LEGACY_LNET_CONFIG > $legacy
4138 tcp1 23 192.168.213.1@tcp:1; tcp5 34 193.30.4.3@tcp:4;
4139 tcp2 54 10.1.3.2@tcp;
4140 tcp3 10.3.4.3@tcp:3;
4144 # Create the verification file to verify the output of
4145 # lustre_routes_conversion script against.
4146 cat <<- VERIFY_LNET_CONFIG > $verify
4147 tcp1: { gateway: 192.168.213.1@tcp, hop: 23, priority: 1 }
4148 tcp5: { gateway: 193.30.4.3@tcp, hop: 34, priority: 4 }
4149 tcp2: { gateway: 10.1.3.2@tcp, hop: 54 }
4150 tcp3: { gateway: 10.3.4.3@tcp, priority: 3 }
4151 tcp4: { gateway: 10.3.3.4@tcp }
4154 # Create the verification file to verify the output of
4155 # lustre_routes_config script against
4156 cat <<- VERIFY_LNET_CONFIG > $verify_conf
4157 lctl --net tcp1 add_route 192.168.213.1@tcp 23 1
4158 lctl --net tcp5 add_route 193.30.4.3@tcp 34 4
4159 lctl --net tcp2 add_route 10.1.3.2@tcp 54 4
4160 lctl --net tcp3 add_route 10.3.4.3@tcp 1 3
4161 lctl --net tcp4 add_route 10.3.3.4@tcp 1 3
4164 lustre_routes_conversion $legacy $new > /dev/null
4165 if [ -f $new ]; then
4166 # verify the conversion output
4167 cmp -s $new $verify > /dev/null
4168 if [ $? -eq 1 ]; then
4169 error "routes conversion failed"
4172 lustre_routes_config --dry-run --verbose $new > $out
4173 # check that the script succeeded
4174 cmp -s $out $verify_conf > /dev/null
4175 if [ $? -eq 1 ]; then
4176 error "routes config failed"
4179 error "routes conversion test failed"
4181 # remove generated files
4182 rm -f $new $legacy $verify $verify_conf $out
4184 run_test 67 "test routes conversion and configuration"
4192 [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.4.53) ] ||
4193 { skip "Need MDS version at least 2.4.53"; return 0; }
4195 umount_client $MOUNT || error "umount client failed"
4197 start_mdt 1 || error "MDT start failed"
4198 start_ost || error "Unable to start OST1"
4200 # START-END - the sequences we'll be reserving
4201 START=$(do_facet $SINGLEMDS \
4202 $LCTL get_param -n seq.ctl*.space | awk -F'[[ ]' '{print $2}')
4203 END=$((START + (1 << 30)))
4204 do_facet $SINGLEMDS \
4205 $LCTL set_param seq.ctl*.fldb="[$START-$END\):0:mdt"
4207 # reset the sequences MDT0000 has already assigned
4208 do_facet $SINGLEMDS \
4209 $LCTL set_param seq.srv*MDT0000.space=clear
4211 # remount to let the client allocate new sequence
4212 mount_client $MOUNT || error "mount client failed"
4214 touch $DIR/$tfile || error "touch $DIR/$tfile failed"
4215 do_facet $SINGLEMDS \
4216 $LCTL get_param seq.srv*MDT0000.space
4217 $LFS path2fid $DIR/$tfile
4219 local old_ifs="$IFS"
4221 fid=($($LFS path2fid $DIR/$tfile))
4225 if [[ $seq < $END ]]; then
4226 error "used reserved sequence $seq?"
4228 cleanup || error "cleanup failed with $?"
4230 run_test 68 "be able to reserve specific sequences in FLDB"
4233 local server_version=$(lustre_version_code $SINGLEMDS)
4235 [[ $server_version -lt $(version_code 2.4.2) ]] &&
4236 skip "Need MDS version at least 2.4.2" && return
4238 [[ $server_version -ge $(version_code 2.4.50) ]] &&
4239 [[ $server_version -lt $(version_code 2.5.0) ]] &&
4240 skip "Need MDS version at least 2.5.0" && return
4244 # use OST0000 since it probably has the most creations
4245 local OSTNAME=$(ostname_from_index 0)
4246 local mdtosc_proc1=$(get_mdtosc_proc_path mds1 $OSTNAME)
4247 local last_id=$(do_facet mds1 $LCTL get_param -n \
4248 osc.$mdtosc_proc1.prealloc_last_id)
4250 # Want to have OST LAST_ID over 1.5 * OST_MAX_PRECREATE to
4251 # verify that the LAST_ID recovery is working properly. If
4252 # not, then the OST will refuse to allow the MDS connect
4253 # because the LAST_ID value is too different from the MDS
4254 #define OST_MAX_PRECREATE=20000
4255 local num_create=$((20000 * 5))
4257 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
4258 $SETSTRIPE -i 0 $DIR/$tdir || error "$SETSTRIPE -i 0 $DIR/$tdir failed"
4259 createmany -o $DIR/$tdir/$tfile- $num_create ||
4260 error "createmany: failed to create $num_create files: $?"
4261 # delete all of the files with objects on OST0 so the
4262 # filesystem is not inconsistent later on
4263 $LFS find $MOUNT --ost 0 | xargs rm
4265 stop_ost || error "OST0 stop failure"
4266 add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat --replace \
4267 $(ostdevname 1) $(ostvdevname 1) ||
4268 error "reformat and replace $ostdev failed"
4269 start_ost || error "OST0 restart failure"
4270 wait_osc_import_state mds ost FULL
4272 touch $DIR/$tdir/$tfile-last || error "create file after reformat"
4273 local idx=$($GETSTRIPE -i $DIR/$tdir/$tfile-last)
4274 [ $idx -ne 0 ] && error "$DIR/$tdir/$tfile-last on $idx not 0" || true
4276 cleanup || error "cleanup failed with $?"
4278 run_test 69 "replace an OST with the same index"
4281 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4284 cleanup || error "cleanup failed with $?"
4286 start_mdt 1 || error "MDT0 start fail"
4288 start_ost || error "OST0 start fail"
4290 start_mdt 2 || error "MDT1 start fail"
4292 mount_client $MOUNT || error "mount client fails"
4294 mkdir $DIR/$tdir || error "create $DIR/$tdir failed"
4296 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4297 error "create remote dir fail"
4299 rm -rf $DIR/$tdir || error "delete dir fail"
4300 cleanup || error "cleanup failed with $?"
4302 run_test 70a "start MDT0, then OST, then MDT1"
4305 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4308 start_ost || error "OST0 start fail"
4310 start_mdt 1 || error "MDT0 start fail"
4311 start_mdt 2 || error "MDT1 start fail"
4313 mount_client $MOUNT || error "mount client fails"
4315 mkdir $DIR/$tdir || error "create $DIR/$tdir failed"
4317 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4318 error "create remote dir fail"
4320 rm -rf $DIR/$tdir || error "delete dir fail"
4322 cleanup || error "cleanup failed with $?"
4324 run_test 70b "start OST, MDT1, MDT0"
4327 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4330 start_mdt 1 || error "MDT0 start fail"
4331 start_mdt 2 || error "MDT1 start fail"
4332 start_ost || error "OST0 start fail"
4334 mount_client $MOUNT || error "mount client fails"
4335 stop_mdt 1 || error "MDT1 start fail"
4337 local mdc_for_mdt1=$($LCTL dl | grep MDT0000-mdc | awk '{print $4}')
4338 echo "deactivate $mdc_for_mdt1"
4339 $LCTL --device $mdc_for_mdt1 deactivate ||
4340 error "set $mdc_for_mdt1 deactivate failed"
4342 mkdir $DIR/$tdir && error "mkdir succeed"
4344 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
4345 error "create remote dir succeed"
4347 cleanup || error "cleanup failed with $?"
4349 run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
4352 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4355 start_mdt 1 || error "MDT0 start fail"
4356 start_mdt 2 || error "MDT1 start fail"
4357 start_ost || error "OST0 start fail"
4359 mount_client $MOUNT || error "mount client fails"
4361 stop_mdt 2 || error "MDT1 start fail"
4363 local mdc_for_mdt2=$($LCTL dl | grep MDT0001-mdc |
4365 echo "deactivate $mdc_for_mdt2"
4366 $LCTL --device $mdc_for_mdt2 deactivate ||
4367 error "set $mdc_for_mdt2 deactivate failed"
4369 mkdir $DIR/$tdir || error "mkdir fail"
4370 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
4371 error "create remote dir succeed"
4373 rm -rf $DIR/$tdir || error "delete dir fail"
4375 cleanup || error "cleanup failed with $?"
4377 run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
4380 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4381 if combined_mgs_mds; then
4382 skip "needs separate MGS/MDT" && return
4386 start_mdt 1 || error "MDT0 start fail"
4387 start_ost || error "OST0 start fail"
4388 start_mdt 2 || error "MDT1 start fail"
4389 start_ost2 || error "OST1 start fail"
4391 mount_client $MOUNT || error "mount client fails"
4393 mkdir $DIR/$tdir || error "mkdir fail"
4394 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4395 error "create remote dir succeed"
4397 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
4398 rm -rf $DIR/$tdir || error "delete dir fail"
4400 umount_client $MOUNT || error "umount_client failed"
4401 stop_mdt 1 || error "MDT0 stop fail"
4402 stop_mdt 2 || error "MDT1 stop fail"
4403 stop_ost || error "OST0 stop fail"
4404 stop_ost2 || error "OST1 stop fail"
4406 run_test 71a "start MDT0 OST0, MDT1, OST1"
4409 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4410 if combined_mgs_mds; then
4411 skip "needs separate MGS/MDT" && return
4415 start_mdt 2 || error "MDT1 start fail"
4416 start_ost || error "OST0 start fail"
4417 start_mdt 1 || error "MDT0 start fail"
4418 start_ost2 || error "OST1 start fail"
4420 mount_client $MOUNT || error "mount client fails"
4422 mkdir $DIR/$tdir || error "mkdir fail"
4423 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4424 error "create remote dir succeed"
4426 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
4427 rm -rf $DIR/$tdir || error "delete dir fail"
4429 umount_client $MOUNT || error "umount_client failed"
4430 stop_mdt 1 || error "MDT0 stop fail"
4431 stop_mdt 2 || error "MDT1 stop fail"
4432 stop_ost || error "OST0 stop fail"
4433 stop_ost2 || error "OST1 stop fail"
4435 run_test 71b "start MDT1, OST0, MDT0, OST1"
4438 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4439 if combined_mgs_mds; then
4440 skip "needs separate MGS/MDT" && return
4444 start_ost || error "OST0 start fail"
4445 start_ost2 || error "OST1 start fail"
4446 start_mdt 2 || error "MDT1 start fail"
4447 start_mdt 1 || error "MDT0 start fail"
4449 mount_client $MOUNT || error "mount client fails"
4451 mkdir $DIR/$tdir || error "mkdir fail"
4452 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4453 error "create remote dir succeed"
4455 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
4456 rm -rf $DIR/$tdir || error "delete dir fail"
4458 umount_client $MOUNT || error "umount_client failed"
4459 stop_mdt 1 || error "MDT0 stop fail"
4460 stop_mdt 2 || error "MDT1 stop fail"
4461 stop_ost || error "OST0 stop fail"
4462 stop_ost2 || error "OST1 stop fail"
4465 run_test 71c "start OST0, OST1, MDT1, MDT0"
4468 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4469 if combined_mgs_mds; then
4470 skip "needs separate MGS/MDT" && return
4474 start_ost || error "OST0 start fail"
4475 start_mdt 2 || error "MDT0 start fail"
4476 start_mdt 1 || error "MDT0 start fail"
4477 start_ost2 || error "OST1 start fail"
4479 mount_client $MOUNT || error "mount client fails"
4481 mkdir $DIR/$tdir || error "mkdir fail"
4482 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4483 error "create remote dir succeed"
4485 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
4486 rm -rf $DIR/$tdir || error "delete dir fail"
4488 umount_client $MOUNT || error "umount_client failed"
4489 stop_mdt 1 || error "MDT0 stop fail"
4490 stop_mdt 2 || error "MDT1 stop fail"
4491 stop_ost || error "OST0 stop fail"
4492 stop_ost2 || error "OST1 stop fail"
4495 run_test 71d "start OST0, MDT1, MDT0, OST1"
4498 [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
4499 if combined_mgs_mds; then
4500 skip "needs separate MGS/MDT" && return
4504 start_ost || error "OST0 start fail"
4505 start_mdt 2 || error "MDT1 start fail"
4506 start_ost2 || error "OST1 start fail"
4507 start_mdt 1 || error "MDT0 start fail"
4509 mount_client $MOUNT || error "mount client fails"
4511 mkdir $DIR/$tdir || error "mkdir fail"
4512 $LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
4513 error "create remote dir succeed"
4515 mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
4516 rm -rf $DIR/$tdir || error "delete dir fail"
4518 umount_client $MOUNT || error "umount_client failed"
4519 stop_mdt 1 || error "MDT0 stop fail"
4520 stop_mdt 2 || error "MDT1 stop fail"
4521 stop_ost || error "OST0 stop fail"
4522 stop_ost2 || error "OST1 stop fail"
4525 run_test 71e "start OST0, MDT1, OST1, MDT0"
4527 test_72() { #LU-2634
4528 local mdsdev=$(mdsdevname 1)
4529 local ostdev=$(ostdevname 1)
4530 local cmd="$E2FSCK -fnvd $mdsdev"
4533 [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
4534 skip "ldiskfs only test" && return
4536 #tune MDT with "-O extents"
4538 for num in $(seq $MDSCOUNT); do
4539 add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
4540 --reformat $(mdsdevname $num) $(mdsvdevname $num) ||
4541 error "add mds $num failed"
4542 do_facet mds${num} "$TUNE2FS -O extents $(mdsdevname $num)" ||
4543 error "$TUNE2FS failed on mds${num}"
4546 add ost1 $(mkfs_opts ost1 $ostdev) --reformat $ostdev ||
4547 error "add $ostdev failed"
4548 start_mgsmds || error "start mds failed"
4549 start_ost || error "start ost failed"
4550 mount_client $MOUNT || error "mount client failed"
4552 #create some short symlinks
4553 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
4554 createmany -o $DIR/$tdir/$tfile-%d $fn
4555 echo "create $fn short symlinks"
4556 for i in $(seq -w 1 $fn); do
4557 ln -s $DIR/$tdir/$tfile-$i $MOUNT/$tfile-$i
4562 umount_client $MOUNT || error "umount client failed"
4563 stop_mds || error "stop mds failed"
4564 stop_ost || error "stop ost failed"
4567 run_e2fsck $(facet_active_host $SINGLEMDS) $mdsdev "-n"
4569 run_test 72 "test fast symlink with extents flag enabled"
4571 test_73() { #LU-3006
4573 [ $(facet_fstype ost1) == zfs ] && import_zpool ost1
4574 do_facet ost1 "$TUNEFS --failnode=1.2.3.4@$NETTYPE $(ostdevname 1)" ||
4575 error "1st tunefs failed"
4576 start_mgsmds || error "start mds failed"
4577 start_ost || error "start ost failed"
4578 mount_client $MOUNT || error "mount client failed"
4579 $LCTL get_param -n osc.*OST0000-osc-[^M]*.import | grep failover_nids |
4580 grep 1.2.3.4@$NETTYPE || error "failover nids haven't changed"
4581 umount_client $MOUNT || error "umount client failed"
4585 run_test 73 "failnode to update from mountdata properly"
4587 test_75() { # LU-2374
4588 [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.1) ]] &&
4589 skip "Need MDS version at least 2.4.1" && return
4592 local opts_mds="$(mkfs_opts mds1 $(mdsdevname 1)) \
4593 --reformat $(mdsdevname 1) $(mdsvdevname 1)"
4594 local opts_ost="$(mkfs_opts ost1 $(ostdevname 1)) \
4595 --reformat $(ostdevname 1) $(ostvdevname 1)"
4597 #check with default parameters
4598 add mds1 $opts_mds || error "add mds1 failed for default params"
4599 add ost1 $opts_ost || error "add ost1 failed for default params"
4601 opts_mds=$(echo $opts_mds | sed -e "s/--mdt//")
4602 opts_mds=$(echo $opts_mds |
4603 sed -e "s/--index=$index/--index=$index --mdt/")
4604 opts_ost=$(echo $opts_ost | sed -e "s/--ost//")
4605 opts_ost=$(echo $opts_ost |
4606 sed -e "s/--index=$index/--index=$index --ost/")
4608 add mds1 $opts_mds || error "add mds1 failed for new params"
4609 add ost1 $opts_ost || error "add ost1 failed for new params"
4612 run_test 75 "The order of --index should be irrelevant"
4615 [[ $(lustre_version_code mgs) -ge $(version_code 2.4.52) ]] ||
4616 { skip "Need MDS version at least 2.4.52" && return 0; }
4618 local MDMB_PARAM="osc.*.max_dirty_mb"
4619 echo "Change MGS params"
4620 local MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM |
4622 echo "max_dirty_mb: $MAX_DIRTY_MB"
4623 local NEW_MAX_DIRTY_MB=$((MAX_DIRTY_MB + MAX_DIRTY_MB))
4624 echo "new_max_dirty_mb: $NEW_MAX_DIRTY_MB"
4625 do_facet mgs $LCTL set_param -P $MDMB_PARAM=$NEW_MAX_DIRTY_MB
4626 wait_update $HOSTNAME "$LCTL get_param -n $MDMB_PARAM |
4627 head -1" $NEW_MAX_DIRTY_MB
4628 MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
4629 echo "$MAX_DIRTY_MB"
4630 [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
4631 error "error while apply max_dirty_mb"
4633 echo "Check the value is stored after remount"
4636 wait_update $HOSTNAME "$LCTL get_param -n $MDMB_PARAM |
4637 head -1" $NEW_MAX_DIRTY_MB
4638 MAX_DIRTY_MB=$($LCTL get_param -n $MDMB_PARAM | head -1)
4639 [ $MAX_DIRTY_MB = $NEW_MAX_DIRTY_MB ] ||
4640 error "max_dirty_mb is not saved after remount"
4642 echo "Change OST params"
4643 CLIENT_PARAM="obdfilter.*.client_cache_count"
4644 local CLIENT_CACHE_COUNT
4645 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
4647 echo "client_cache_count: $CLIENT_CACHE_COUNT"
4648 NEW_CLIENT_CACHE_COUNT=$((CLIENT_CACHE_COUNT+CLIENT_CACHE_COUNT))
4649 echo "new_client_cache_count: $NEW_CLIENT_CACHE_COUNT"
4650 do_facet mgs $LCTL set_param -P $CLIENT_PARAM=$NEW_CLIENT_CACHE_COUNT
4651 wait_update $(facet_host ost1) "$LCTL get_param -n $CLIENT_PARAM |
4652 head -1" $NEW_CLIENT_CACHE_COUNT
4653 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
4655 echo "$CLIENT_CACHE_COUNT"
4656 [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
4657 error "error while apply client_cache_count"
4659 echo "Check the value is stored after remount"
4662 wait_update $(facet_host ost1) "$LCTL get_param -n $CLIENT_PARAM |
4663 head -1" $NEW_CLIENT_CACHE_COUNT
4664 CLIENT_CACHE_COUNT=$(do_facet ost1 $LCTL get_param -n $CLIENT_PARAM |
4666 echo "$CLIENT_CACHE_COUNT"
4667 [ $CLIENT_CACHE_COUNT = $NEW_CLIENT_CACHE_COUNT ] ||
4668 error "client_cache_count is not saved after remount"
4671 run_test 76a "set permanent params set_param -P"
4673 test_76b() { # LU-4783
4674 [[ $(lustre_version_code mgs) -ge $(version_code 2.5.57) ]] ||
4675 { skip "Need MGS version at least 2.5.57" && return 0; }
4678 do_facet mgs $LCTL get_param mgs.MGS.live.params ||
4679 error "start params log failed"
4682 run_test 76b "verify params log setup correctly"
4684 test_77() { # LU-3445
4685 local server_version=$(lustre_version_code $SINGLEMDS)
4687 [[ $server_version -ge $(version_code 2.2.60) ]] &&
4688 [[ $server_version -le $(version_code 2.4.0) ]] &&
4689 skip "Need MDS version < 2.2.60 or > 2.4.0" && return
4691 if [[ -z "$fs2ost_DEV" || -z "$fs2mds_DEV" ]]; then
4692 is_blkdev $SINGLEMDS $(mdsdevname ${SINGLEMDS//mds/}) &&
4693 skip_env "mixed loopback and real device not working" && return
4696 local fs2mdsdev=$(mdsdevname 1_2)
4697 local fs2ostdev=$(ostdevname 1_2)
4698 local fs2mdsvdev=$(mdsvdevname 1_2)
4699 local fs2ostvdev=$(ostvdevname 1_2)
4700 local fsname=test1234
4702 local failnid="$(h2$NETTYPE 1.2.3.4),$(h2$NETTYPE 4.3.2.1)"
4704 add fs2mds $(mkfs_opts mds1 $fs2mdsdev) --mgs --fsname=$fsname \
4705 --reformat $fs2mdsdev $fs2mdsvdev || error "add fs2mds failed"
4706 start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_fs2 EXIT INT ||
4707 error "start fs2mds failed"
4709 mgsnid=$(do_facet fs2mds $LCTL list_nids | xargs | tr ' ' ,)
4710 [[ $mgsnid = *,* ]] || mgsnid+=",$mgsnid"
4712 add fs2ost $(mkfs_opts ost1 $fs2ostdev) --mgsnode=$mgsnid \
4713 --failnode=$failnid --fsname=$fsname \
4714 --reformat $fs2ostdev $fs2ostvdev ||
4715 error "add fs2ost failed"
4716 start fs2ost $fs2ostdev $OST_MOUNT_OPTS || error "start fs2ost failed"
4718 mkdir -p $MOUNT2 || error "mkdir $MOUNT2 failed"
4719 $MOUNT_CMD $mgsnid:/$fsname $MOUNT2 || error "mount $MOUNT2 failed"
4720 DIR=$MOUNT2 MOUNT=$MOUNT2 check_mount || error "check $MOUNT2 failed"
4723 run_test 77 "comma-separated MGS NIDs and failover node NIDs"
4726 [[ $(facet_fstype $SINGLEMDS) != ldiskfs ||
4727 $(facet_fstype ost1) != ldiskfs ]] &&
4728 skip "only applicable to ldiskfs-based MDTs and OSTs" && return
4730 # reformat the Lustre filesystem with a smaller size
4731 local saved_MDSSIZE=$MDSSIZE
4732 local saved_OSTSIZE=$OSTSIZE
4733 MDSSIZE=$((MDSSIZE - 20000))
4734 OSTSIZE=$((OSTSIZE - 20000))
4735 reformat || error "(1) reformat Lustre filesystem failed"
4736 MDSSIZE=$saved_MDSSIZE
4737 OSTSIZE=$saved_OSTSIZE
4739 # mount the Lustre filesystem
4740 setup_noconfig || error "(2) setup Lustre filesystem failed"
4743 log "create test files"
4747 mkdir $MOUNT/$tdir || error "(3) mkdir $MOUNT/$tdir failed"
4748 for i in $(seq $num_files); do
4749 file=$MOUNT/$tdir/$tfile-$i
4750 dd if=/dev/urandom of=$file count=1 bs=1M ||
4751 error "(4) create $file failed"
4754 # unmount the Lustre filesystem
4755 cleanup || error "(5) cleanup Lustre filesystem failed"
4757 # run e2fsck on the MDT and OST devices
4758 local mds_host=$(facet_active_host $SINGLEMDS)
4759 local ost_host=$(facet_active_host ost1)
4760 local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
4761 local ost_dev=$(ostdevname 1)
4763 run_e2fsck $mds_host $mds_dev "-y"
4764 run_e2fsck $ost_host $ost_dev "-y"
4766 # get the original block count of the MDT and OST filesystems
4767 local mds_orig_blks=$(get_block_count $SINGLEMDS $mds_dev)
4768 local ost_orig_blks=$(get_block_count ost1 $ost_dev)
4770 # expand the MDT and OST filesystems to the device size
4771 run_resize2fs $SINGLEMDS $mds_dev "" || error "expand $SINGLEMDS failed"
4772 run_resize2fs ost1 $ost_dev "" || error "expand ost1 failed"
4774 # run e2fsck on the MDT and OST devices again
4775 run_e2fsck $mds_host $mds_dev "-y"
4776 run_e2fsck $ost_host $ost_dev "-y"
4778 # mount the Lustre filesystem
4782 log "check files after expanding the MDT and OST filesystems"
4783 for i in $(seq $num_files); do
4784 file=$MOUNT/$tdir/$tfile-$i
4785 $CHECKSTAT -t file -s 1048576 $file ||
4786 error "(6) checkstat $file failed"
4790 log "create more files after expanding the MDT and OST filesystems"
4791 for i in $(seq $((num_files + 1)) $((num_files + 10))); do
4792 file=$MOUNT/$tdir/$tfile-$i
4793 dd if=/dev/urandom of=$file count=1 bs=1M ||
4794 error "(7) create $file failed"
4797 # unmount the Lustre filesystem
4798 cleanup || error "(8) cleanup Lustre filesystem failed"
4800 # run e2fsck on the MDT and OST devices
4801 run_e2fsck $mds_host $mds_dev "-y"
4802 run_e2fsck $ost_host $ost_dev "-y"
4804 # get the maximum block count of the MDT and OST filesystems
4805 local mds_max_blks=$(get_block_count $SINGLEMDS $mds_dev)
4806 local ost_max_blks=$(get_block_count ost1 $ost_dev)
4808 # get the minimum block count of the MDT and OST filesystems
4809 local mds_min_blks=$(run_resize2fs $SINGLEMDS $mds_dev "" "-P" 2>&1 |
4810 grep minimum | sed -e 's/^.*filesystem: //g')
4811 local ost_min_blks=$(run_resize2fs ost1 $ost_dev "" "-P" 2>&1 |
4812 grep minimum | sed -e 's/^.*filesystem: //g')
4814 # shrink the MDT and OST filesystems to a smaller size
4818 if [[ $mds_max_blks -gt $mds_min_blks &&
4819 $mds_max_blks -gt $mds_orig_blks ]]; then
4820 [[ $mds_orig_blks -gt $mds_min_blks ]] &&
4821 base_blks=$mds_orig_blks || base_blks=$mds_min_blks
4822 new_blks=$(( (mds_max_blks - base_blks) / 2 + base_blks ))
4823 run_resize2fs $SINGLEMDS $mds_dev $new_blks ||
4824 error "shrink $SINGLEMDS to $new_blks failed"
4828 if [[ $ost_max_blks -gt $ost_min_blks &&
4829 $ost_max_blks -gt $ost_orig_blks ]]; then
4830 [[ $ost_orig_blks -gt $ost_min_blks ]] &&
4831 base_blks=$ost_orig_blks || base_blks=$ost_min_blks
4832 new_blks=$(( (ost_max_blks - base_blks) / 2 + base_blks ))
4833 run_resize2fs ost1 $ost_dev $new_blks ||
4834 error "shrink ost1 to $new_blks failed"
4838 # check whether the MDT or OST filesystem was shrunk or not
4840 combined_mgs_mds || stop_mgs || error "(9) stop mgs failed"
4841 reformat || error "(10) reformat Lustre filesystem failed"
4845 # run e2fsck on the MDT and OST devices again
4846 run_e2fsck $mds_host $mds_dev "-y"
4847 run_e2fsck $ost_host $ost_dev "-y"
4849 # mount the Lustre filesystem again
4853 log "check files after shrinking the MDT and OST filesystems"
4854 for i in $(seq $((num_files + 10))); do
4855 file=$MOUNT/$tdir/$tfile-$i
4856 $CHECKSTAT -t file -s 1048576 $file ||
4857 error "(11) checkstat $file failed"
4860 # unmount and reformat the Lustre filesystem
4861 cleanup || error "(12) cleanup Lustre filesystem failed"
4862 combined_mgs_mds || stop_mgs || error "(13) stop mgs failed"
4863 reformat || error "(14) reformat Lustre filesystem failed"
4865 run_test 78 "run resize2fs on MDT and OST filesystems"
4867 test_79() { # LU-4227
4868 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.59) ]] ||
4869 { skip "Need MDS version at least 2.5.59"; return 0; }
4871 local mdsdev1=$(mdsdevname 1)
4872 local mdsvdev1=$(mdsvdevname 1)
4873 local mdsdev2=$(mdsdevname 2)
4874 local mdsvdev2=$(mdsvdevname 2)
4875 local ostdev1=$(ostdevname 1)
4876 local ostvdev1=$(ostvdevname 1)
4877 local opts_mds1="$(mkfs_opts mds1 $mdsdev1) --reformat"
4878 local opts_mds2="$(mkfs_opts mds2 $mdsdev2) --reformat"
4879 local opts_ost1="$(mkfs_opts ost1 $ostdev1) --reformat"
4882 # remove --mgs/--mgsnode from mkfs.lustre options
4883 opts_mds1=$(echo $opts_mds1 | sed -e "s/--mgs//")
4885 mgsnode_opt=$(echo $opts_mds2 |
4886 awk '{ for ( i = 1; i < NF; i++ )
4887 if ( $i ~ "--mgsnode" ) { print $i; break } }')
4888 [ -n $mgsnode_opt ] &&
4889 opts_mds2=$(echo $opts_mds2 | sed -e "s/$mgsnode_opt//")
4891 mgsnode_opt=$(echo $opts_ost1 |
4892 awk '{ for ( i = 1; i < NF; i++ )
4893 if ( $i ~ "--mgsnode" ) { print $i; break } }')
4894 [ -n $mgsnode_opt ] &&
4895 opts_ost1=$(echo $opts_ost1 | sed -e "s/$mgsnode_opt//")
4897 # -MGS, format a mdt without --mgs option
4898 add mds1 $opts_mds1 $mdsdev1 $mdsvdev1 &&
4899 error "Must specify --mgs when formatting mdt combined with mgs"
4901 # +MGS, format a mdt/ost without --mgsnode option
4902 add mds1 $(mkfs_opts mds1 $mdsdev1) --reformat $mdsdev1 $mdsvdev1 \
4903 > /dev/null || error "start mds1 failed"
4904 add mds2 $opts_mds2 $mdsdev2 $mdsvdev2 &&
4905 error "Must specify --mgsnode when formatting a mdt"
4906 add ost1 $opts_ost1 $ostdev1 $ostvdev2 &&
4907 error "Must specify --mgsnode when formatting an ost"
4911 run_test 79 "format MDT/OST without mgs option (should return errors)"
4914 start_mds || error "Failed to start MDT"
4915 start_ost || error "Failed to start OST1"
4916 uuid=$(do_facet ost1 $LCTL get_param -n mgc.*.uuid)
4917 #define OBD_FAIL_MGS_PAUSE_TARGET_CON 0x906
4918 do_facet ost1 "$LCTL set_param fail_val=10 fail_loc=0x906"
4919 do_facet mgs "$LCTL set_param fail_val=10 fail_loc=0x906"
4920 do_facet mgs "$LCTL set_param -n mgs/MGS/evict_client $uuid"
4922 start_ost2 || error "Failed to start OST2"
4924 do_facet ost1 "$LCTL set_param fail_loc=0"
4927 run_test 80 "mgc import reconnect race"
4929 # Save the original values of $OSTCOUNT and $OSTINDEX$i.
4931 local new_ostcount=$1
4932 saved_ostcount=$OSTCOUNT
4933 OSTCOUNT=$new_ostcount
4937 for i in $(seq $OSTCOUNT); do
4939 eval saved_ostindex$i=${!index}
4944 # Restore the original values of $OSTCOUNT and $OSTINDEX$i.
4945 restore_ostindex() {
4950 for i in $(seq $OSTCOUNT); do
4951 index=saved_ostindex$i
4952 eval OSTINDEX$i=${!index}
4954 OSTCOUNT=$saved_ostcount
4959 # The main purpose of this test is to ensure the OST_INDEX_LIST functions as
4960 # expected. This test uses OST_INDEX_LIST to format OSTs with a randomly
4961 # assigned index and ensures we can mount such a formatted file system
4962 test_81() { # LU-4665
4963 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
4964 { skip "Need MDS version at least 2.6.54" && return; }
4965 [[ $OSTCOUNT -ge 3 ]] || { skip_env "Need at least 3 OSTs" && return; }
4969 # Each time RANDOM is referenced, a random integer between 0 and 32767
4972 local saved_ostindex1=$OSTINDEX1
4973 for i in 65535 $((RANDOM + 65536)); do
4974 echo -e "\nFormat ost1 with --index=$i, should fail"
4976 if add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --reformat \
4977 $(ostdevname 1) $(ostvdevname 1); then
4978 OSTINDEX1=$saved_ostindex1
4979 error "format ost1 with --index=$i should fail"
4982 OSTINDEX1=$saved_ostindex1
4986 # Format OSTs with random sparse indices.
4987 trap "restore_ostindex" EXIT
4988 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices"
4989 OST_INDEX_LIST=[0,$((RANDOM * 2 % 65533 + 1)),65534] formatall
4991 # Setup and check Lustre filesystem.
4992 start_mgsmds || error "start_mgsmds failed"
4993 for i in $(seq $OSTCOUNT); do
4994 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
4995 error "start ost$i failed"
4998 mount_client $MOUNT || error "mount client $MOUNT failed"
4999 check_mount || error "check client $MOUNT failed"
5002 local max_easize=$($LCTL get_param -n llite.*.max_easize)
5003 [[ $max_easize -eq 128 ]] ||
5004 error "max_easize is $max_easize, should be 128 bytes"
5008 run_test 81 "sparse OST indexing"
5010 # Wait OSTs to be active on both client and MDT side.
5012 local cmd="$LCTL get_param -n lov.$FSNAME-clilov-*.target_obd |
5013 awk 'BEGIN {c = 0} /ACTIVE/{c += 1} END {printf \\\"%d\\\", c}'"
5014 wait_update $HOSTNAME "eval $cmd" $OSTCOUNT ||
5015 error "wait_update OSTs up on client failed"
5017 cmd="$LCTL get_param -n lod.$FSNAME-MDT*-*.target_obd | sort -u |
5018 awk 'BEGIN {c = 0} /ACTIVE/{c += 1} END {printf \\\"%d\\\", c}'"
5019 wait_update_facet $SINGLEMDS "eval $cmd" $OSTCOUNT ||
5020 error "wait_update OSTs up on MDT failed"
5023 # Here we exercise the stripe placement functionality on a file system that
5024 # has formatted the OST with a random index. With the file system the following
5025 # functionality is tested:
5027 # 1. Creating a new file with a specific stripe layout.
5029 # 2. Modifiy a existing empty file with a specific stripe layout.
5031 # 3. Ensure we fail to set the stripe layout of a file that already has one.
5033 # 4. If ost-index is defined we need to ensure it is the first entry in the
5034 # ost index list returned by lfs getstripe.
5036 # 5. Lastly ensure this functionality fails with directories.
5037 test_82a() { # LU-4665
5038 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
5039 { skip "Need MDS version at least 2.6.54" && return; }
5040 [[ $OSTCOUNT -ge 3 ]] || { skip_env "Need at least 3 OSTs" && return; }
5046 # Format OSTs with random sparse indices.
5050 for i in $(seq $OSTCOUNT); do
5051 index=$((RANDOM * 2))
5052 ost_indices+=" $index"
5054 ost_indices=$(comma_list $ost_indices)
5056 trap "restore_ostindex" EXIT
5057 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices $ost_indices"
5058 OST_INDEX_LIST=[$ost_indices] formatall
5060 # Setup Lustre filesystem.
5061 start_mgsmds || error "start_mgsmds failed"
5062 for i in $(seq $OSTCOUNT); do
5063 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
5064 error "start ost$i failed"
5067 mount_client $MOUNT || error "mount client $MOUNT failed"
5070 $LFS df $MOUNT || error "$LFS df $MOUNT failed"
5071 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
5073 # 1. If the file does not exist, new file will be created
5074 # with specified OSTs.
5075 local file=$DIR/$tdir/$tfile-1
5076 local cmd="$SETSTRIPE -o $ost_indices $file"
5078 eval $cmd || error "$cmd failed"
5079 check_stripe_count $file $OSTCOUNT
5080 check_obdidx $file $ost_indices
5081 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5082 error "write $file failed"
5084 # 2. If the file already exists and is an empty file, the file
5085 # will be attached with specified layout.
5086 file=$DIR/$tdir/$tfile-2
5087 mcreate $file || error "mcreate $file failed"
5088 cmd="$SETSTRIPE -o $ost_indices $file"
5090 eval $cmd || error "$cmd failed"
5091 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5092 error "write $file failed"
5093 check_stripe_count $file $OSTCOUNT
5094 check_obdidx $file $ost_indices
5096 # 3. If the file already has a valid layout attached, the command
5097 # should fail with EBUSY.
5099 eval $cmd && error "stripe is already set on $file, $cmd should fail"
5101 # 4. If [--stripe-index|-i <start_ost_idx>] is used, the index must
5102 # be in the OST indices list.
5103 local start_ost_idx=${ost_indices##*,}
5104 file=$DIR/$tdir/$tfile-3
5105 cmd="$SETSTRIPE -o $ost_indices -i $start_ost_idx $file"
5107 eval $cmd || error "$cmd failed"
5108 check_stripe_count $file $OSTCOUNT
5109 check_obdidx $file $ost_indices
5110 check_start_ost_idx $file $start_ost_idx
5112 file=$DIR/$tdir/$tfile-4
5114 cmd+=" -o $(exclude_items_from_list $ost_indices $start_ost_idx)"
5115 cmd+=" -i $start_ost_idx $file"
5117 eval $cmd && error "index $start_ost_idx should be in $ost_indices"
5119 # 5. Specifying OST indices for directory should fail with ENOSUPP.
5120 local dir=$DIR/$tdir/$tdir
5121 mkdir $dir || error "mkdir $dir failed"
5122 cmd="$SETSTRIPE -o $ost_indices $dir"
5124 eval $cmd && error "$cmd should fail, specifying OST indices" \
5125 "for directory is not supported"
5129 run_test 82a "specify OSTs for file (succeed) or directory (fail)"
5134 # Remove OSTs from a pool and destroy the pool.
5135 destroy_pool $ost_pool || true
5140 # Test 82b is run to ensure that if the user supplies a pool with a specific
5141 # stripe layout that it behaves proprerly. It should fail in the case that
5142 # the supplied OST index list points to OSTs not contained in the user
5144 test_82b() { # LU-4665
5145 [[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.6.54) ]] ||
5146 { skip "Need MDS version at least 2.6.54" && return; }
5147 [[ $OSTCOUNT -ge 4 ]] || { skip_env "Need at least 4 OSTs" && return; }
5153 # Format OSTs with random sparse indices.
5157 for i in $(seq $OSTCOUNT); do
5158 index=$((RANDOM * 2))
5159 ost_indices+=" $index"
5161 ost_indices=$(comma_list $ost_indices)
5163 trap "restore_ostindex" EXIT
5164 echo -e "\nFormat $OSTCOUNT OSTs with sparse indices $ost_indices"
5165 OST_INDEX_LIST=[$ost_indices] formatall
5167 # Setup Lustre filesystem.
5168 start_mgsmds || error "start_mgsmds failed"
5169 for i in $(seq $OSTCOUNT); do
5170 start ost$i $(ostdevname $i) $OST_MOUNT_OPTS ||
5171 error "start ost$i failed"
5174 mount_client $MOUNT || error "mount client $MOUNT failed"
5176 $LFS df $MOUNT || error "$LFS df $MOUNT failed"
5177 mkdir $DIR/$tdir || error "mkdir $DIR/$tdir failed"
5179 # Create a new pool and add OSTs into it.
5180 local ost_pool=$FSNAME.$TESTNAME
5181 create_pool $ost_pool || error "create OST pool $ost_pool failed"
5184 trap "cleanup_82b" EXIT
5186 local ost_idx_in_list=${ost_indices##*,}
5187 local ost_idx_in_pool=$(exclude_items_from_list $ost_indices \
5190 local ost_targets="$FSNAME-OST["
5191 for i in ${ost_idx_in_pool//,/ }; do
5192 ost_targets=$ost_targets$(printf "%04x," $i)
5194 ost_targets="${ost_targets%,}]"
5196 local ost_targets_uuid=$(for i in ${ost_idx_in_pool//,/ }; \
5197 do printf "$FSNAME-OST%04x_UUID\n" $i; done |
5198 sort -u | tr '\n' ' ')
5200 local cmd="$LCTL pool_add $ost_pool $ost_targets"
5201 do_facet mgs $cmd || error "$cmd failed"
5202 wait_update $HOSTNAME "$LCTL get_param -n lov.$FSNAME-*.pools.$TESTNAME|
5203 sort -u | tr '\n' ' ' " "$ost_targets_uuid" ||
5204 error "wait_update $ost_pool failed"
5205 pool_list $ost_pool || error "list OST pool $ost_pool failed"
5207 # If [--pool|-p <pool_name>] is set with [--ost-list|-o <ost_indices>],
5208 # then the OSTs must be the members of the pool.
5209 local file=$DIR/$tdir/$tfile
5210 cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
5212 eval $cmd && error "OST with index $ost_idx_in_list should be" \
5213 "in OST pool $ost_pool"
5215 # Only select OST $ost_idx_in_list from $ost_pool for file.
5216 ost_idx_in_list=${ost_idx_in_pool#*,}
5217 cmd="$SETSTRIPE -p $ost_pool -o $ost_idx_in_list $file"
5219 eval $cmd || error "$cmd failed"
5220 cmd="$GETSTRIPE $file"
5222 eval $cmd || error "$cmd failed"
5223 check_stripe_count $file 2
5224 check_obdidx $file $ost_idx_in_list
5225 dd if=/dev/urandom of=$file count=1 bs=1M > /dev/null 2>&1 ||
5226 error "write $file failed"
5230 run_test 82b "specify OSTs for file with --pool and --ost-list options"
5233 [[ $(lustre_version_code ost1) -ge $(version_code 2.6.91) ]] ||
5234 { skip "Need OST version at least 2.6.91" && return 0; }
5235 if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
5236 skip "Only applicable to ldiskfs-based MDTs"
5246 ostmnt=$(facet_mntpt ost1)
5247 fstype=$(facet_fstype ost1)
5249 # Mount the OST as an ldiskfs filesystem.
5250 log "mount the OST $dev as a $fstype filesystem"
5251 add ost1 $(mkfs_opts ost1 $dev) $FSTYPE_OPT \
5252 --reformat $dev $dev > /dev/null ||
5253 error "format ost1 error"
5255 if ! test -b $dev; then
5256 mnt_opts=$(csa_add "$OST_MOUNT_OPTS" -o loop)
5258 echo "mnt_opts $mnt_opts"
5259 do_facet ost1 mount -t $fstype $dev \
5261 # Run llverfs on the mounted ldiskfs filesystem.
5262 # It is needed to get ENOSPACE.
5263 log "run llverfs in partial mode on the OST $fstype $ostmnt"
5264 do_rpc_nodes $(facet_host ost1) run_llverfs $ostmnt -vpl \
5265 "no" || error "run_llverfs error on $fstype"
5268 log "unmount the OST $dev"
5271 # Delete file IO_scrub. Later osd_scrub_setup will try to
5272 # create "IO_scrub" but will get ENOSPACE.
5274 echo "start ost1 service on `facet_active_host ost1`"
5275 start ost1 `ostdevname 1` $OST_MOUNT_OPTS
5278 err=$(do_facet ost1 dmesg | grep "VFS: Busy inodes after unmount of")
5279 echo "string err $err"
5280 [ -z "$err" ] || error $err
5283 run_test 83 "ENOSPACE on OST doesn't cause message VFS: \
5284 Busy inodes after unmount ..."
5286 recovery_time_min() {
5287 local CONNECTION_SWITCH_MIN=5
5288 local CONNECTION_SWITCH_INC=5
5289 local CONNECTION_SWITCH_MAX
5290 local RECONNECT_DELAY_MAX
5291 local INITIAL_CONNECT_TIMEOUT
5295 #CONNECTION_SWITCH_MAX=min(50, max($CONNECTION_SWITCH_MIN,$TIMEOUT)
5296 (($CONNECTION_SWITCH_MIN>$TIMEOUT)) && \
5297 max=$CONNECTION_SWITCH_MIN || max=$TIMEOUT
5298 (($max<50)) && CONNECTION_SWITCH_MAX=$max || CONNECTION_SWITCH_MAX=50
5300 #INITIAL_CONNECT_TIMEOUT = max(CONNECTION_SWITCH_MIN, \
5302 TO_20=$(($TIMEOUT/20))
5303 (($CONNECTION_SWITCH_MIN>$TO_20)) && \
5304 INITIAL_CONNECT_TIMEOUT=$CONNECTION_SWITCH_MIN || \
5305 INITIAL_CONNECT_TIMEOUT=$TO_20
5307 RECONNECT_DELAY_MAX=$(($CONNECTION_SWITCH_MAX+$CONNECTION_SWITCH_INC+ \
5308 $INITIAL_CONNECT_TIMEOUT))
5309 echo $((2*$RECONNECT_DELAY_MAX))
5313 local facet=$SINGLEMDS
5314 local num=$(echo $facet | tr -d "mds")
5315 local dev=$(mdsdevname $num)
5316 local time_min=$(recovery_time_min)
5317 local recovery_duration
5318 local completed_clients
5321 echo "start mds service on $(facet_active_host $facet)"
5322 start $facet ${dev} $MDS_MOUNT_OPTS \
5323 "-o recovery_time_hard=$time_min,recovery_time_soft=$time_min" $@ ||
5324 error "start MDS failed"
5329 echo "recovery_time=$time_min, timeout=$TIMEOUT, wrap_up=$wrap_up"
5331 mount_client $MOUNT1 || error "mount failed"
5332 mount_client $MOUNT2 || error "mount failed"
5334 replay_barrier $SINGLEMDS
5335 createmany -o $DIR1/$tfile-%d 1000
5337 # We need to catch the end of recovery window to extend it.
5338 # Skip 5 requests and add delay to request handling.
5339 #define OBD_FAIL_TGT_REPLAY_DELAY 0x709 | FAIL_SKIP
5340 do_facet $SINGLEMDS "lctl set_param fail_loc=0x20000709 fail_val=5"
5342 facet_failover $SINGLEMDS || error "failover: $?"
5345 echo "recovery status"
5346 do_facet $SINGLEMDS \
5347 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status"
5349 recovery_duration=$(do_facet $SINGLEMDS \
5350 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
5351 awk '/recovery_duration/ { print $2 }')
5352 (( $recovery_duration > $time_min + $wrap_up )) &&
5353 error "recovery_duration > recovery_time_hard + wrap up"
5354 completed_clients=$(do_facet $SINGLEMDS \
5355 "$LCTL get_param -n mdt.$FSNAME-MDT0000.recovery_status" |
5356 awk '/completed_clients/ { print $2 }')
5357 [ "$completed_clients" = "1/2" ] ||
5358 error "completed_clients != 1/2: $completed_clients"
5360 do_facet $SINGLEMDS "lctl set_param fail_loc=0"
5361 umount_client $MOUNT1
5362 umount_client $MOUNT2
5368 run_test 84 "check recovery_hard_time"
5370 if ! combined_mgs_mds ; then
5376 # restore the values of MDSSIZE and OSTSIZE
5377 MDSSIZE=$STORED_MDSSIZE
5378 OSTSIZE=$STORED_OSTSIZE