From 743b85a32e24cff0c77dff739691043970a0901e Mon Sep 17 00:00:00 2001
From: Alex Zhuravlev <bzzz@whamcloud.com>
Date: Mon, 29 Apr 2019 11:21:13 +0300
Subject: [PATCH 1/1] LU-2233 tests: improve tests sanityn/40-47

sanity/40-46 usually take 800-900s which is almost a half
of the whole sanityn pass. 99.(9)% of time the tests just
wait to ensure specific order the operations execute in.

the patch changes cfs_fail_timeout_set() so that it can
interrupt waiting if fail_loc is set to 0 - polling with
1/10s frequency is used.

the tests itself are modified to reset fail_loc. to be
able to do so both operations (referenced as OP1 and OP2
in the tests) are run in background. once started and then
ensured with pdo_sched() helper that MDS threads got to the
blocking points, we can interrupt OP1 and do usual checks.

ONLY=40-47 sh sanityn.sh take: 1017s before and 78s after.

Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: Ie01bd6a077333f6f57e533a73f38588a073a2381
Reviewed-on: https://review.whamcloud.com/4392
Tested-by: Jenkins
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
---
 libcfs/libcfs/fail.c    |  19 +-
 lustre/tests/sanityn.sh | 507 ++++++++++++++++++++++++++++++------------------
 2 files changed, 329 insertions(+), 197 deletions(-)

diff --git a/libcfs/libcfs/fail.c b/libcfs/libcfs/fail.c
index 12addb2..13d31ab 100644
--- a/libcfs/libcfs/fail.c
+++ b/libcfs/libcfs/fail.c
@@ -121,16 +121,23 @@ EXPORT_SYMBOL(__cfs_fail_check_set);
 
 int __cfs_fail_timeout_set(__u32 id, __u32 value, int ms, int set)
 {
+	ktime_t till = ktime_add_ms(ktime_get(), ms);
 	int ret = 0;
 
 	ret = __cfs_fail_check_set(id, value, set);
 	if (ret && likely(ms > 0)) {
-		CERROR("cfs_fail_timeout id %x sleeping for %dms\n",
-		       id, ms);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(cfs_time_seconds(ms) / 1000);
-		set_current_state(TASK_RUNNING);
-		CERROR("cfs_fail_timeout id %x awake\n", id);
+		CERROR("cfs_fail_timeout id %x sleeping for %dms\n", id, ms);
+		while (ktime_before(ktime_get(), till)) {
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout(msecs_to_jiffies(1000) / 10);
+			set_current_state(TASK_RUNNING);
+			if (!cfs_fail_loc) {
+				CERROR("cfs_fail_timeout interrupted\n");
+				break;
+			}
+		}
+		if (cfs_fail_loc)
+			CERROR("cfs_fail_timeout id %x awake\n", id);
 	}
 	return ret;
 }
diff --git a/lustre/tests/sanityn.sh b/lustre/tests/sanityn.sh
index 789e614..e22911a 100755
--- a/lustre/tests/sanityn.sh
+++ b/lustre/tests/sanityn.sh
@@ -1460,13 +1460,21 @@ test_39d() { # LU-7310
 }
 run_test 39d "sync write should update mtime"
 
+pdo_sched() {
+	# how long 40-47 take with specific delay
+	# sleep 0.1 # 78s
+	sleep 0.2 # 103s
+	# sleep 0.3 # 124s
+	# sleep 0.5 # 164s
+}
+
 # check that pid exists hence second operation wasn't blocked by first one
 # if it is so then there is no conflict, return 0
 # else second operation is conflicting with first one, return 1
 check_pdo_conflict() {
 	local pid=$1
 	local conflict=0
-	sleep 1 # to ensure OP1 is finished on client if OP2 is blocked by OP1
+	pdo_sched # to ensure OP1 is finished on client if OP2 is blocked by OP1
 	if [[ `ps --pid $pid | wc -l` == 1 ]]; then
 		conflict=1
 		echo "Conflict"
@@ -1484,8 +1492,7 @@ test_40a() {
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	touch $DIR2
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
+	PID1=$!; pdo_sched
 	touch $DIR2/$tfile-2
 	check_pdo_conflict $PID1 || error "create is blocked"
 	mkdir $DIR2/$tfile-3
@@ -1502,6 +1509,7 @@ test_40a() {
 
 	#  all operations above shouldn't wait the first one
 	check_pdo_conflict $PID1 || error "parallel operation is blocked"
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	wait $PID1
 	rm -rf $DIR/$tfile*
 	return 0
@@ -1513,8 +1521,7 @@ test_40b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	touch $DIR1/$tfile &
-	PID1=$!
-	sleep 1
+	PID1=$!; pdo_sched
 	# open|create
 	touch $DIR2/$tfile-2
 	check_pdo_conflict $PID1 || error "create is blocked"
@@ -1532,6 +1539,7 @@ test_40b() {
 	# all operations above shouldn't wait the first one
 
         check_pdo_conflict $PID1 || error "parallel operation is blocked"
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	wait $PID1
 	rm -rf $DIR/$tfile*
 	return 0
@@ -1544,8 +1552,7 @@ test_40c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile $DIR1/$tfile-0 &
-	PID1=$!
-	sleep 1
+	PID1=$!; pdo_sched
 	# open|create
 	touch $DIR2/$tfile-2
 	check_pdo_conflict $PID1 || error "create is blocked"
@@ -1563,6 +1570,7 @@ test_40c() {
 
         # all operations above shouldn't wait the first one
 	check_pdo_conflict $PID1 || error "parallel operation is blocked"
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	wait $PID1
 	rm -rf $DIR/$tfile*
 	return 0
@@ -1575,8 +1583,7 @@ test_40d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
+	PID1=$!; pdo_sched
 	# open|create
 	touch $DIR2/$tfile-2
 	check_pdo_conflict $PID1 || error "create is blocked"
@@ -1594,6 +1601,7 @@ test_40d() {
 
 	# all operations above shouldn't wait the first one
 	check_pdo_conflict $PID1 || error "parallel operation is blocked"
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	wait $PID1
 	return 0
 }
@@ -1605,8 +1613,7 @@ test_40e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-0 &
-	PID1=$!
-	sleep 1
+	PID1=$!; pdo_sched
 	# open|create
 	touch $DIR2/$tfile-2
 	check_pdo_conflict $PID1 || error "create is blocked"
@@ -1622,6 +1629,7 @@ test_40e() {
 
        # all operations above shouldn't wait the first one
 	check_pdo_conflict $PID1 || error "parallel operation is blocked"
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	wait $PID1
 	rm -rf $DIR/$tfile*
 	return 0
@@ -1633,10 +1641,12 @@ test_41a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile && error "mkdir must fail"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; echo "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1646,10 +1656,12 @@ test_41b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1660,10 +1672,12 @@ test_41c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1673,10 +1687,12 @@ test_41d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	rm $DIR2/$tfile || error "unlink must succeed"
+	PID1=$! ; pdo_sched
+	rm $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1687,10 +1703,12 @@ test_41e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile-2 $DIR2/$tfile || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1700,10 +1718,12 @@ test_41f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-2 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1713,10 +1733,12 @@ test_41g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1726,10 +1748,12 @@ test_41h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$MULTIOP $DIR1/$tfile oO_CREAT:O_RDWR:c &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1740,10 +1764,12 @@ test_42a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile && error "mkdir must fail"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1753,10 +1779,12 @@ test_42b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1767,10 +1795,12 @@ test_42c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1780,10 +1810,12 @@ test_42d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	rmdir $DIR2/$tfile || error "unlink must succeed"
+	PID1=$! ; pdo_sched
+	rmdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1794,10 +1826,12 @@ test_42e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv -T $DIR2/$tfile-2 $DIR2/$tfile && error "rename must fail"
+	PID1=$! ; pdo_sched
+	mv -T $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1807,10 +1841,12 @@ test_42f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-2 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1820,10 +1856,12 @@ test_42g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1833,10 +1871,12 @@ test_42h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mkdir $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1848,10 +1888,12 @@ test_43a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile || error "mkdir must succeed"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "mkdir must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1862,10 +1904,12 @@ test_43b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c || error "create must succeed"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "create must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1877,10 +1921,12 @@ test_43c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-2 $DIR2/$tfile || error "link must succeed"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "link must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1891,10 +1937,12 @@ test_43d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	rm $DIR2/$tfile && error "unlink must fail"
+	PID1=$! ; pdo_sched
+	rm $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "unlink must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1906,10 +1954,12 @@ test_43e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv -u $DIR2/$tfile-2 $DIR2/$tfile || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv -u $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1920,10 +1970,12 @@ test_43f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-2 && error "rename must fail"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-2 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1934,10 +1986,12 @@ test_43g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null && error "stat must fail"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "stat must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1948,10 +2002,12 @@ test_43h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1963,11 +2019,13 @@ test_43i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	rm $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$LFS mkdir -i 1 $DIR2/$tfile || error "remote mkdir must succeed"
+	PID1=$! ; pdo_sched
+	$LFS mkdir -i 1 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 &&
 		{ wait $PID1; error "remote mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "remote mkdir must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1979,10 +2037,13 @@ test_44a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2   0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile && error "mkdir must fail"
-	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
+	check_pdo_conflict $PID1 && { wait $PID1; date;error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
+	date
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -1993,10 +2054,12 @@ test_44b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2008,10 +2071,12 @@ test_44c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-3 $DIR2/$tfile && error "link must fail"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-3 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2022,10 +2087,12 @@ test_44d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	rm $DIR2/$tfile || error "unlink must succeed"
+	PID1=$! ; pdo_sched
+	rm $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2038,10 +2105,12 @@ test_44e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile-3 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2053,10 +2122,12 @@ test_44f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-3 || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-3 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2067,10 +2138,12 @@ test_44g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2081,10 +2154,12 @@ test_44h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2    0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2097,11 +2172,13 @@ test_44i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK2   0x146
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000146
 	mv $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$LFS mkdir -i 1 $DIR2/$tfile && error "remote mkdir must fail"
+	PID1=$! ; pdo_sched
+	$LFS mkdir -i 1 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 				error "remote mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "remote mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2113,10 +2190,12 @@ test_45a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile || error "mkdir must succeed"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "mkdir must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2127,10 +2206,12 @@ test_45b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c || error "create must succeed"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "create must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2142,10 +2223,12 @@ test_45c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-3 $DIR2/$tfile || error "link must succeed"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-3 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "link must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2156,10 +2239,12 @@ test_45d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	rm $DIR2/$tfile && error "unlink must fail"
+	PID1=$! ; pdo_sched
+	rm $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "unlink must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2171,10 +2256,12 @@ test_45e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile-3 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2185,10 +2272,12 @@ test_45f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-3 && error "rename must fail"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-3 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2199,10 +2288,12 @@ test_45g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null && error "stat must fail"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "stat must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2213,10 +2304,11 @@ test_45h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2228,11 +2320,13 @@ test_45i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	mv $DIR1/$tfile $DIR1/$tfile-2 &
-	PID1=$!
-	sleep 1
-	$LFS mkdir -i 1 $DIR2/$tfile || error "create remote dir must succeed"
+	PID1=$! ; pdo_sched
+	$LFS mkdir -i 1 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 				error "create remote dir isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "create remote dir must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2244,10 +2338,12 @@ test_46a() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile && error "mkdir must fail"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2258,10 +2354,12 @@ test_46b() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+	PID1=$! ; pdo_sched
+	$MULTIOP $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "create isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2272,10 +2370,12 @@ test_46c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile $DIR2/$tfile && error "link must fail"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2286,10 +2386,12 @@ test_46d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	rm $DIR2/$tfile || error "unlink must succeed"
+	PID1=$! ; pdo_sched
+	rm $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "unlink must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2301,10 +2403,12 @@ test_46e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile-3 $DIR2/$tfile || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile-3 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2316,10 +2420,12 @@ test_46f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-3 || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-3 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2330,10 +2436,12 @@ test_46g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2344,11 +2452,12 @@ test_46h() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	ls -lia $DIR2/ > /dev/null
-	check_pdo_conflict $PID1 && { wait $PID1;
-			error "readdir isn't blocked"; }
+	PID1=$! ; pdo_sched
+	ls -lia $DIR2/ > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
+	check_pdo_conflict $PID1 && { wait $PID1; error "readdir isn't blocked"; }
+	wait $PID2
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2360,11 +2469,13 @@ test_46i() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	link $DIR1/$tfile-2 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	$LFS mkdir -i 1 $DIR2/$tfile && error "remote mkdir must fail"
+	PID1=$! ; pdo_sched
+	$LFS mkdir -i 1 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 				error "remote mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "remote mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2376,10 +2487,12 @@ test_47a() {
 	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mkdir $DIR2/$tfile && error "mkdir must fail"
+	PID1=$! ; pdo_sched
+	mkdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "mkdir isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "mkdir must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2390,11 +2503,13 @@ test_47b() {
 	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	multiop $DIR2/$tfile oO_CREAT:O_EXCL:c && error "create must fail"
+	PID1=$! ; pdo_sched
+	multiop $DIR2/$tfile oO_CREAT:O_EXCL:c &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 					error "create isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "create must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2406,10 +2521,12 @@ test_47c() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	link $DIR2/$tfile-2 $DIR2/$tfile && error "link must fail"
+	PID1=$! ; pdo_sched
+	link $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1; error "link isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "link must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2420,11 +2537,13 @@ test_47d() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	rmdir $DIR2/$tfile || error "unlink must succeed"
+	PID1=$! ; pdo_sched
+	rmdir $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 					error "unlink isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rmdir must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2436,11 +2555,13 @@ test_47e() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv -T $DIR2/$tfile-2 $DIR2/$tfile && error "rename must fail"
+	PID1=$! ; pdo_sched
+	mv -T $DIR2/$tfile-2 $DIR2/$tfile &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 					error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -ne 0 ] || error "rename must fail"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2451,11 +2572,13 @@ test_47f() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 1
-	mv $DIR2/$tfile $DIR2/$tfile-2 || error "rename must succeed"
+	PID1=$! ; pdo_sched
+	mv $DIR2/$tfile $DIR2/$tfile-2 &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 					error "rename isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "rename must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
@@ -2468,11 +2591,13 @@ test_47g() {
 #define OBD_FAIL_ONCE|OBD_FAIL_MDS_PDO_LOCK    0x145
 	do_facet $SINGLEMDS lctl set_param fail_loc=0x80000145
 	$LFS mkdir -i 1 $DIR1/$tfile &
-	PID1=$!
-	sleep 2
-	stat $DIR2/$tfile > /dev/null || error "stat must succeed"
+	PID1=$! ; pdo_sched
+	stat $DIR2/$tfile > /dev/null &
+	PID2=$! ; pdo_sched
+	do_facet $SINGLEMDS lctl set_param fail_loc=0
 	check_pdo_conflict $PID1 && { wait $PID1;
 					error "getattr isn't blocked"; }
+	wait $PID2 ; [ $? -eq 0 ] || error "stat must succeed"
 	rm -rf $DIR/$tfile*
 	return 0
 }
-- 
1.8.3.1