Whamcloud - gitweb
Bobi Jam [Tue, 30 Mar 2021 11:20:26 +0000 (19:20 +0800)]
LU-14526 flr: mirror split downgrade SOM
After mirror split, the file's blocks on SoM is not accurate, this
patch downgrade the SoM from STRICT so that size glimpse does not
trust the SoM from the MDS.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I02350c24190d96af93fed8c1b8a0bc6beb2c4bc2
Reviewed-on: https://review.whamcloud.com/43168
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yingjin Qian <qian@ddn.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Sat, 8 May 2021 16:15:33 +0000 (12:15 -0400)]
LU-14291 lustre: limit header scope for server only handling
The lustre headers have server only function declarations and
inline functions. Only include them if HAVE_SERVER_SUPPORT is
set. This gets us closer to building OpenSFS modules against
a Linux kernel with a native Lustre client. Move a few things
from UAPI headers that are used only by kernel space to kernel
only headers where they belong.
For mdc_changlog.c a debug message access a field that is
available the server which is never the case. Since its
nonsense we can remove the report of this field
Change-Id: I6e2d3bebc121aef97fe69344d496e230f62b28ad
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/43096
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Thu, 6 May 2021 01:27:28 +0000 (11:27 +1000)]
LU-14195 lnet: improve compat code for IPV6_V6ONLY sock opt
As get_fs() and set_fs() are deprecated, using them to call
sock->ops->setsockopt() is not a good solution.
Since linux 5.9 (v5.8-rc4-1952-ga7b75c5a8c41) it has been
possible to pass a "sockptr" to ->setsockopt() which can provide
a kernel address.
Prior to 5.8, kernet_setsockopt() is available and should still be
used.
For 5.8, when neither preferred option is available, we can pass
a NULL pointer which has the same effect as a pointer to zero.
Fixes:
10d99554631b ("LU-13783 lnet: remove kernel_setsockopt() from lnet_sock_listen()")
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I78c1f735a73cc9c835371c139e946144c6df5108
Reviewed-on: https://review.whamcloud.com/43559
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Tue, 4 May 2021 14:12:05 +0000 (10:12 -0400)]
LU-14651 uapi: rename CONFIG_T_* to MGS_CFG_T_*
The Linux kernel uses CONFIG_* as a way to determine if a feature
is available. Using CONFIG_* in an UAPI is considered an error
and in the most recent kernels will break a build. While we don't
have any CONFIG_* in our UAPI headers we do have CONFIG_T_*
which is used for config logs. This naming confuses the Linux
kernel build system so just rename these variables to MGS_CFG_T_*
instead.
Test-Parameters: trivial
Change-Id: I574510c2da90e9ae608c9e2374d75220b7abb19d
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/43494
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Aurelien Degremont <degremoa@amazon.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
John L. Hammond [Wed, 7 Apr 2021 19:11:25 +0000 (14:11 -0500)]
LU-14583 llapi: handle symlinks in llapi_file_get_stripe()
In llapi_file_get_stripe(), if the IOC_MDC_GETFILESTRIPE ioctl handler
returns -ENOTTY or -ENODATA then try to resolve any symlinks in the
path and try again.
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: Ic046d6ef77d8342d47336144e3066cab3a940a96
Reviewed-on: https://review.whamcloud.com/43229
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Mon, 29 Mar 2021 05:22:11 +0000 (10:52 +0530)]
LU-14565 ofd: Do not rely on tgd_blockbit
tgd_blockbit is recordsize bits set during mkfs.
This once set does not change. However, 'zfs set'
can be used to change the OST blocksize. Instead
of using cached value of 'tgd_blockbit' always
calculate the blocksize bits which may have
changed.
Test-case: sanity/104c added.
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Icc100cca0d5ae492c41d60f0bf97512450f796bc
Reviewed-on: https://review.whamcloud.com/43154
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Oleg Drokin [Tue, 13 Apr 2021 07:46:41 +0000 (03:46 -0400)]
LU-10948 llite: Introduce inode open heat counter
Initial framework to support detection of naive apps that
assume open-closes are "free" and proceed to open/close
same files between minute operations.
We will track number of file opens per inode and last time inode
was closed.
Initially we'll expose these controls:
llite/opencache_threshold_count - enables functionality and controls after how
many opens open lock is requested
llite/opencache_threshold_ms - if any reopen happens within this time (in
ms), the open would trigger open lock request
llite/opencache_max_ms - If last close was longer than this many ms
ago - start counting opens from zero again
Once enough useful data is collected we can look into adding a heatmap
or another similar mechanism to better manage it and enable it
by default with sensible settings.
Change-Id: I1aa5455b458840acad651f651c883a7a7a67ab4c
Signed-off-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/32158
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yingjin Qian <qian@ddn.com>
Chris Horn [Fri, 23 Apr 2021 19:05:02 +0000 (14:05 -0500)]
LU-14627 tests: Create unload_modules_local
t-f allows for loading modules on single node via load_modules_local.
However, there is no corresponding unload_modules_local that can be
called to cleanup after call to load_modules_local, so we create it.
unload_modules() refactored to use unload_modules_local.
Also address a potential issue that can prevent LND modules from
unloading. Some LNet setup (particularly those in sanity-lnet) may
require that we call lnetctl lnet unconfigure (or lctl net down)
to drop a ref on the module before it can be unloaded.
HPE-bug-id: LUS-9031
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I6458a7728f5f559f8641c5a9e29dd775c8445c38
Reviewed-on: https://review.whamcloud.com/43425
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Thu, 29 Apr 2021 13:04:04 +0000 (09:04 -0400)]
LU-13783 libcfs: support absence of account_page_dirtied
Some kernels export neither account_page_dirtied nor
kallsyms_lookup_name.
For these kernels we need to use __set_page_dirty() and suffer the
cost of dropping an reclaiming the page-tree lock.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I69d934480832f3909d3ec103f11e1d62489d70d7
Reviewed-on: https://review.whamcloud.com/40827
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Cyril Bordage [Fri, 16 Oct 2020 14:10:28 +0000 (16:10 +0200)]
LU-13722 utils: lnetctl discrepancy in YAML output
Use "max_interfaces" instead of "max_intf" in YAML output/input.
Signed-off-by: Cyril Bordage <cbordage@whamcloud.com>
Change-Id: Id0d1d1a4220d817b238456946e28b985e1fdc80c
Reviewed-on: https://review.whamcloud.com/40269
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Amir Shehata <ashehata@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Chris Horn [Mon, 17 Aug 2020 21:02:10 +0000 (16:02 -0500)]
LU-13912 lnet: Correct the router ping interval calculation
The router ping interval is being divided by the number of local nets
which results in sending pings more frequently than defined by the
alive_router_check_interval. In addition, the current code is structured
such that we may not find a peer net in need of a ping until after
inspecting the router list multiple times. Re-work the code so that the
loop that inspects a router's peer nets will look at all of them until
it either loops back around the list or it finds one that actually
needs to be pinged.
We also move the check of LNET_PEER_RTR_DISCOVERY so that we avoid the
work of inspecting the router's peer nets if the router is already being
discovered.
Test-Parameters: trivial
HPE-bug-id: LUS-9237
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I5a4733002f29c0ade6aee62b4424313d5d245556
Reviewed-on: https://review.whamcloud.com/39694
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Wang Shilong [Mon, 26 Apr 2021 03:23:26 +0000 (11:23 +0800)]
LU-14641 osd-ldiskfs: write commit declaring improvement
This patch try to:
1)extent bytes could be missed to increase with less than
1M, fix to to compare it with current value, and decay
it for every allocation.
2)with system space usage growing up, mballoc codes won't
try best to scan block group to align best free extent as
we can. So extent bytes per extent could be decayed to a
very small value, this could make us reserve too many credits.
We could be more optimistic in the credit reservations, even
in a case where the filesystem is nearly full, it is extremely
unlikely that the worst case would ever be hit.
3)Add extent bytes stats and debug ability to analysis
over reservation problem.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Change-Id: I357c4a855147ba26a9e9bbe9ab1269bcfd44e5f3
Reviewed-on: https://review.whamcloud.com/43446
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sun, 11 Apr 2021 02:04:30 +0000 (20:04 -0600)]
LU-14603 ptlrpc: quiet messages for unsupported opcodes
Reduce message spew for unhandled RPC opcodes.
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I35496168e3aa29ecb06076654ef0aa97ba2540e5
Reviewed-on: https://review.whamcloud.com/43257
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Stephane Thiell <sthiell@stanford.edu>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Wed, 5 May 2021 13:01:15 +0000 (15:01 +0200)]
LU-14669 tests: reduce time spent in sanity-sec
Several tests in sanity-sec loop over a number of nodemaps (16),
a number of NID ranges (3), a number of IP addresses (6) and a
number of mapped IDs (10).
Whereas the benefits for test coverage of such a large number of
combinations is not clear, looping over all this certainly takes
a lot of time.
So arbitrarily reduce that to smaller numbers in case SLOW!=yes:
- 3 nodemaps;
- 2 NID ranges;
- 2 IP addresses;
- 3 mapped ID
This reduces the test time for sanity-sec from ~12000s to ~7500s.
Similarly, test_fops function, used by tests 16,17,18,19,20,21,22,
loops over a number of users (4), a number of mapped IDs (6), a
number of permission bit masks (4), and for each client.
Arbitrarily reduce that to smaller numbers in case SLOW!=yes, to
save test time without degrading test coverage:
- 2 users;
- 4 mapped IDs;
- 2 permission bit masks;
- from only one client.
This further reduces the test time from ~7500s to ~5000s.
Test-Parameters: trivial
Test-Parameters: mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=el8.3 serverdistro=el8.3 testlist=sanity-sec
Test-Parameters: mdscount=2 mdtcount=4 osscount=1 ostcount=8 clientcount=2 clientdistro=el8.3 serverdistro=el8.3 testlist=sanity-sec env=SLOW=yes
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Idbe9c8daca43feafe7ca6481902cf6b54e3fa87c
Reviewed-on: https://review.whamcloud.com/43543
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sun, 25 Apr 2021 11:02:19 +0000 (05:02 -0600)]
LU-13439 lmv: qos stay on current MDT if less full
Keep "space balanced" subdirectories on the parent MDT if it is less
full than average, since it doesn't make sense to select another MDT
which may occasionally be *more* full. This also reduces random
"MDT jumping" and needless remote directories.
Reduce the QOS threshold for space balanced LMV layouts, so that the
MDTs don't become too imbalanced before trying to fix the problem.
Change the LUSTRE_OP_MKDIR opcode to be 1 instead of 0, so it can
be seen that a valid opcode has been stored into the structure.
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Iab34c7eade03d761aa16b08f409f7e5d69cd70bd
Reviewed-on: https://review.whamcloud.com/43445
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Mon, 15 Mar 2021 03:57:36 +0000 (11:57 +0800)]
LU-13440 lmv: add default LMV inherit depth
A new field "__u8 lum_max_inherit" is added into struct lmv_user_md,
which represents the inherit depth of default LMV. It will be
decreased by 1 for subdirectories.
The valid value of lum_max_inherit is [0, 255]:
* 0 means unlimited inherit.
* 1 means inherit end.
* 250 is the max inherit depth.
* [251, 254] are reserved.
* 255 means it's not set.
A new field "__u8 lum_max_inherit_rr" is added, if default stripe
offset is -1, lum_max_inherit_rr is non-zero, and system is balanced,
new directories are created in roundrobin mannner, otherwise they
are created on the MDT where their parents are located to avoid
creating remote directories. And similarly this value will be
decreased by 1 for each level of subdirectories.
The valid value of lum_max_inherit_rr is different:
* 0 means not set.
* 1 means inherit end.
* 250 is the max inherit depth.
* [251, 254] are reserved.
* 255 means unlimited inherit.
However for the user interface of "lfs", the valid value is [-1, 250]:
* -1 means unlimited inherit.
* 0 means not set.
* others are the same.
Add sanity 413c.
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I98ccad8556a0469f83bd7d79f5086a2184d5b115
Reviewed-on: https://review.whamcloud.com/43131
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Lai Siyao [Wed, 21 Apr 2021 12:05:52 +0000 (20:05 +0800)]
LU-13440 obdclass: server qos penalty miscaculated
Server qos penalty calculation uses active target count, but it
should use server count, which will make it larger than expected,
then weight of targets are often 0, and finally cause MDT0 is
often chosen in qos allocation.
Fixes:
45222b2ef ("LU-12624 obdclass: lu_tgt_descs cleanup")
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I1982363e4ff74c7344dd5e07d04e29214afa8a7f
Reviewed-on: https://review.whamcloud.com/43385
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Nikitas Angelinas [Thu, 15 Apr 2021 19:09:16 +0000 (12:09 -0700)]
LU-14628 ptlrpc: remove might_sleep() in sptlrpc_gc_del_sec()
sptlrpc_gc_del_sec() calls mutex_lock() which calls might_sleep(), so
the explicit might_sleep() call can be removed as redundant.
Signed-off-by: Nikitas Angelinas <nikitas.angelinas@hpe.com>
Test-Parameters: trivial
Change-Id: I48714fae12e63ba5e37ec0f9aa3ab7f688b9475d
Reviewed-on: https://review.whamcloud.com/43397
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Mr. NeilBrown [Thu, 22 Apr 2021 18:27:38 +0000 (14:27 -0400)]
LU-12678 lnet: use list_first_entry() in lnet/klnds subdirectory.
Convert
list_entry(foo->next .....)
to
list_first_entry(foo, ....)
in 'lnet/klnds
In several cases the call is combined with a list_empty() test and
list_first_entry_or_null() is used
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Mr. NeilBrown <neilb@suse.de>
Change-Id: I3b2b33c3c9284c02e44610614d64a1f84be300a4
Reviewed-on: https://review.whamcloud.com/43419
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Elena Gryaznova [Thu, 22 Apr 2021 14:15:42 +0000 (17:15 +0300)]
LU-14632 tests: fix sanity-hsm test_606()
After check_and_setup_lustre() mds1_dev is equal to
/dev/mapper/mds1_flakey, which is unexported to saved real
device (/dev/vdc) by stop():
stop mds1
elif dm_flakey_supported mds1; then
dm_cleanup_dev mds1
unexport_dm_dev mds1
As a result stack_trap() is called with non existing
/dev/mapper/mds1_flakey:
stack_trap 'stop mds1; start mds1 /dev/mapper/mds1_flakey
-o rw,user_xattr' EXIT
and failed as:
losetup: /dev/mapper/mds1_flakey: failed to set up loop device:
No such file or directory
Reproducer:
run ONLY=606 sh sanity-hsm.sh on "failover" setup (mds1_HOST !=
mds1failover_HOST), no llmount.sh before the test
Fixes:
54b9e3f78935 ("LU-684 tests: replace dev_read_only patch with dm-flakey")
Test-Parameters: trivial testlist=sanity-hsm env=ONLY=606
Test-Parameters: fstype=zfs testlist=sanity-hsm env=ONLY=606
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-9920
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Change-Id: I9ab3cbcf67c6fd046861810a2ceab262f211436b
Reviewed-on: https://review.whamcloud.com/43409
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Buisson [Tue, 23 Mar 2021 14:19:01 +0000 (14:19 +0000)]
LU-13717 sec: rework includes for client encryption
Simplify includes for crypto, by not repeating stubs in case
HAVE_LUSTRE_CRYPTO is not defined.
Expose encoding routines that are going to be used in the Lustre
code (both client and server sides) with filename encryption.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I6c5853d6da7120edd2bec3a12494251d873151a8
Reviewed-on: https://review.whamcloud.com/43386
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Wang Shilong [Tue, 20 Apr 2021 01:47:25 +0000 (09:47 +0800)]
LU-14616 readahead: fix reserving for unaliged read
If read is [2K, 3K] on x86 platform, we only need
read one page, but it was calculated as 2 pages.
This could be problem, as we need reserve more
pages credits, vvp_page_completion_read() will only
free actual reading pages, which cause @ra_cur_pages
leaked.
Fixes:
d4a54de84c0 ("LU-12367 llite: Fix page count for unaligned reads")
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Change-Id: I3cf03965196c1af833184d9cfc16779f79f5722c
Reviewed-on: https://review.whamcloud.com/43377
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Sun, 18 Apr 2021 13:52:25 +0000 (16:52 +0300)]
LU-14621 mdd: fix lock-tx order in orphan cleanup
start the transaction and then take locks.
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: Iba4be17df55459142baa7585f47231f1b72ebf0b
Reviewed-on: https://review.whamcloud.com/43362
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Wang Shilong [Fri, 16 Apr 2021 02:04:17 +0000 (10:04 +0800)]
LU-14616 readahead: export pages directly without RA
With Readahead disabled, @vpg_defer_uptodate should not
be set as we don't reserve credits for such read.
In vvp_page_completion_read() we will call ll_ra_count_put()
which makes @ra_cur_pages negative.
Fixes:
7e8efb339b ("LU-12043 llite: fix to submit complete read block with ra disabled")
Change-Id: I1c9134f5972aa0d0e7aac998f02c690cc55b433b
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-on: https://review.whamcloud.com/43338
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Emoly Liu [Sun, 25 Apr 2021 00:48:42 +0000 (08:48 +0800)]
LU-14612 utils: Add functions llapi_group_lock64/unlock64()
Add new functions llapi_group_lock64/unlock64() for 64-bit usage.
Test-Parameters: trivial
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: Id79ae634ba6a787974be481b51743604c4adb536
Reviewed-on: https://review.whamcloud.com/43310
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Jian Yu [Tue, 13 Apr 2021 23:41:31 +0000 (16:41 -0700)]
LU-14604 kernel: kernel update RHEL8.3 [4.18.0-240.22.1.el8_3]
Update RHEL8.3 kernel to 4.18.0-240.22.1.el8_3.
Test-Parameters: trivial \
clientdistro=el8.3 serverdistro=el8.3 testlist=sanity
Test-Parameters: trivial fstype=zfs \
clientdistro=el8.3 serverdistro=el8.3 testlist=sanity
Change-Id: I1a3152d95822a74e05f9b44f590a6cdb1f8b02b6
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/43258
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Fri, 9 Apr 2021 12:16:55 +0000 (08:16 -0400)]
LU-14599 osp: limit allocation at osp_sync_process_committed
Sometimes osp cancels very large cookie list with 64K elements.
In this case osp_sync_process_committed() tries to allocate 64 pages
and uses vmalloc.
The fix limits memory allocation size to 4 page with kmalloc, and
reuse it in a loop.
HPE-bug-id: LUS-9815
Fixes:
6d7332102 ("LU-11924 osp: combine llog cancel operations")
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: Ic875335a28f78494fdb3cbc4b0145e5a43831ee8
Reviewed-on: https://review.whamcloud.com/43250
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Olaf Faaland [Thu, 25 Mar 2021 01:35:10 +0000 (18:35 -0700)]
LU-14553 changelog: eliminate mdd_changelog_clear warning
When handling a changelog_clear request, the user may specify a
range of indices which do not exist. Similarly, the user may
specify a changelog user which does not exist. Neither indicates
a problem within Lustre that justifies a a console warning.
Change those cases to CDEBUG.
Test-Parameters: trivial
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Change-Id: I64bab12ef4978c4bf7139f5f36a39f9b109616fb
Reviewed-on: https://review.whamcloud.com/43125
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Sat, 13 Mar 2021 15:48:54 +0000 (23:48 +0800)]
LU-14537 mdd: directory migrate skips project ID check
mdd_migrate_sanity_check() used to call mdd_rename_sanity_check(),
while the latter checks parent and sub file project ID, which is
redundant for migration because it's an internal layout change.
Add sanity 230t.
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: If5ac2131acb1dfb30a312dc34052287776f581c7
Reviewed-on: https://review.whamcloud.com/42110
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
John L. Hammond [Fri, 22 Jan 2021 16:56:06 +0000 (10:56 -0600)]
LU-14359 hsm: support a flatter HSM archive format
Add versioning (v1 and v2) to the HSM archive format (directory
layout):
v1: (oid & 0xffff)/-/-/-/-/-/FID
v2: ((oid ^ seq) & 0xffff)/FID
v1 is the original layout and the default. v2 is the new layout which
should be selected for new installs.
Add an option --archive-format to select the archive format.
Add YAML configuration file support to lhsmtool_posix with properties
achive_format and archive_path. Add an option --config to set the
config file.
Adapt sanity-hsm and test-framework to allow testing of both archive
formats.
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I6d6bd0c8817a491848b554fa76078d876549cc1f
Reviewed-on: https://review.whamcloud.com/41312
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Fri, 22 Jan 2021 02:42:33 +0000 (13:42 +1100)]
LU-14357 fid: simplify locking for fid updates
'struct lu_client_seq' contains a mutex (lcs_mutex) and a second
open-coded mutex (lcs_waitq, lcs_update). Both of these are using in
gettign a new fid, possibly from the server.
lcs_mutex is the main mutex which protects the local variables. If an
RPC to the server is required, the extra mutex is held during that
RPC.
This was apparently intended to avoid some deadlock, presumably with
seq_client_flush(). However as seq_client_flush() now takes both
mutexes as well, it is still prone to any such deadlock, but does not
appear to actually suffer from one.
See:
Commit
23e2a370c8a3 ("b=24255 move seq_client_alloc_seq out of
lcs_sem")
Commit
d1feb5c774d4 ("LU-662 fix conflict between seq_client_flush
and seq_client_alloc_fid")
for some of the history.
The extra open-coded mutex appears to provide no value, so let's
remove it.
As part of this, seq_fid_alloc_fini() is open-coded into the two call
sites, which adds further simplification.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: Ia39eca7d925c9d49fbf942923de8af79dba4f6bf
Reviewed-on: https://review.whamcloud.com/41299
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Serguei Smirnov [Tue, 30 Mar 2021 16:58:57 +0000 (12:58 -0400)]
LU-12815 socklnd: add conns_per_peer parameter
Introduce conns_per_peer ksocklnd module parameter.
In typed mode, this parameter shall control
the number of BULK_IN and BULK_OUT tcp connections,
while the number of CONTROL connections shall stay
at 1. In untyped mode, this parameter shall control
the number of untyped connections.
The default conns_per_peer is 1. Max is 127.
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Change-Id: I70bbaf7899ae1fbc41de34553c8c4ad1c7d55f7e
Reviewed-on: https://review.whamcloud.com/41056
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Sun, 12 Jul 2020 15:47:55 +0000 (10:47 -0500)]
LU-13781 lnet: Local NI must be on same net as next-hop
When sending to a remote peer we need to restrict our selection of a
local NI to those on the same peer net as the next-hop.
The code currently selects a local NI on the peer net specified by the
lr_lnet field of the lnet_route returned by lnet_find_route_locked().
However, lnet_find_route_locked() may select a next-hop peer NI on any
local peer net - not just lr_lnet.
A redundant assignment to sd->sd_msg->msg_src_nid_param is also
removed. That variable is always set appropriately in
lnet_select_pathway().
Test-Parameters: trivial
HPE-bug-id: LUS-9095
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: If1bec26d6646b9e66b99656d7db2dc538d631a34
Reviewed-on: https://review.whamcloud.com/39352
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 28 Dec 2019 09:42:54 +0000 (02:42 -0700)]
LU-13107 utils: clean up lctl command usage
The lctl usage is confusing because it lists a number of valid
commands after "testing (DANGEROUS)", such as LFSCK and llog.
Move the useful commands before the "testing" section so it is
not mis-interpreted as all following commands are dangerous.
Group some other commands together with more related commands,
rather than whatever order they happened to be imlpemented in.
Remove function prototypes for commands that no longer exist.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I469f9c92953762cc46a68e44238c4b67ebacab07
Reviewed-on: https://review.whamcloud.com/37108
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Stephane Thiell <sthiell@stanford.edu>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Tue, 25 Aug 2020 01:48:34 +0000 (11:48 +1000)]
LU-11085 llite: reimplement range_lock with Linux interval_tree
As a step towards removing the lustre interval-tree implementation,
reimplent range_lock to use Linux interval trees.
As Linux interval trees allow the same interval to be stored twice,
this allows the removal of the rl_next_lock list and associated code.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I1d1669345fac0945e0e189b87a74ca8e7582e842
Reviewed-on: https://review.whamcloud.com/39726
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Fri, 16 Apr 2021 15:56:01 +0000 (23:56 +0800)]
LU-14618 lov: correctly handling sub-lock init failure
In lov_lock_sub_init(), if a sublock initialization fails, it needs to
bail out of the outer loop as well as the inner one.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: Ic4e16f484a0a64c670eea5d47054bac19bc95144
Reviewed-on: https://review.whamcloud.com/43345
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Fri, 16 Apr 2021 09:57:34 +0000 (05:57 -0400)]
LU-14617 utils: llog_reader updatelog support
The patch adds printing UPDATE_REC for llog_reader. It is usefull
for updatelog analyze. Here is an example of record
[0x50001a21b:0x1233d:0x0] type:xattr_set/7 params:3 p_0:0 p_1:1 p_2:2
[0x50001a211:0x475:0x0] type:xattr_set/7 params:3 p_0:0 p_1:1 p_2:2
[0x3800182e3:0x475:0x0] type:xattr_set/7 params:3 p_0:0 p_1:1 p_2:2
[0x200032c9a:0x245:0x0] type:xattr_set/7 params:3 p_0:0 p_1:1 p_2:2
[0x200000001:0x15:0x0] type:write/12 params:2 p_0:3 p_1:4
p_0 - 12/trusted.lov
p_1 - 0/
p_2 - 25972/\x0100000000000000000000000000000000000000000002000...
p_3 - 25974/\x0800000000000000P\xD1AB006x0000000400EC^\x000000...
p_4 - 1/
llog logic processing base on incrementing record index,
the fix adds checks for it. Also adds more info from header,
and drops useless - Bit X not set.
Test-Parameters: trivial
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: Id50de15040526dc07ae708ac5db046832706be31
Reviewed-on: https://review.whamcloud.com/43343
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Mon, 12 Apr 2021 12:19:47 +0000 (08:19 -0400)]
LU-14606 llog: hide ENOENT for cancelling record
Llog allows parallel records processing. A record could be cancelled
at callback. If two threads processing and cancelling the same record,
one thread would get ENOENT.
The error was observed during purging changlog records.The patch
adds reproducer test sanity 160m.
This is a valid case, let's hide ENOENT error from a caller.
HPE-bug-id: LUS-9826
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: Id00b959e6f329c2ad34966f8a17a52f71680f24c
Reviewed-on: https://review.whamcloud.com/43264
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Artem Blagodarenko [Tue, 1 Sep 2020 19:47:22 +0000 (15:47 -0400)]
LU-13937 osd: OST with isize < 256 stripe info stored in LMA
osd_xattr_set_pfid() expects XATTR_NAME_FID to be exist if
LMAC_STRIPE_INF is absent and delete it if LU_XATTR_REPLACE is set.
There are some cases, after upgrade, when LMAC_STRIPE_INF is absent
and there is no XATTR_NAME_FID.
No need return -ENODATA to the client, because having XATTR_NAME_FID
absent is what situation requires, so osd_xattr_set_pfid() can
continue to fill LMA.
Change-Id: If1690204912ba0875e2251264eb28286e930b3a7
hpe-bug-id: LUS-9106
Signed-off-by: Artem Blagodarenko <artem.blagodarenko@hpe.com>
Reviewed-on: https://review.whamcloud.com/39790
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Wed, 21 Apr 2021 19:22:46 +0000 (14:22 -0500)]
LU-14627 lnet: Allow delayed sends
The net_delay_add has some code related to delaying sends, but it
isn't fully implemented. Modify lnet_post_send_locked() to check
whether the message being sent matches a rule and should be delayed.
Fix some bugs with how the delay timers were set and checked.
HPE-bug-id: LUS-7651
Test-Parameters: trivial
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Icbd9ee81d2ff0162a01a4187807ea2114a42276d
Reviewed-on: https://review.whamcloud.com/43416
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Wed, 7 Apr 2021 16:22:53 +0000 (12:22 -0400)]
LU-13903 utils: separate out server code for lctl
The utility lctl is used by both client and server management but
the code is not cleanly separated for each case. This breaks
building lctl for the native Linux Lustre client since it only
contains client related work. Fix up lctl to be slimed down for
client only targets.
Change-Id: I0c8c037087de1155e478a2580fc952629c341447
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/42141
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Wed, 20 Jan 2021 08:08:00 +0000 (11:08 +0300)]
LU-14344 mdc: make rpc set for MDS_STATFS interruptible
otherwise it ignores signals making imposible to interrupt
mount process with a signal which is checked by conf-sanity/23a
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I882c774f1143d03c248282ecf7a0e2079d0627f5
Reviewed-on: https://review.whamcloud.com/41282
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Wed, 3 Feb 2021 11:04:52 +0000 (06:04 -0500)]
LU-14397 ptlrpc: idle import vs lock enqueue race
There is a window after ptlrpc_check_import_is_idle()
and setting LUSTRE_IMP_CONNECTING for lock enqueue.
The lock get granted on OST and is returned to the client.
Server's lock is destroyed on OST_DISCONNECT.
Perform import counters check with setting LUSTRE_IMP_CONNECTING.
A regression test_812c was added to sanity.
HPE-bug-id: LUS-8705
Signed-off-by: Andriy Skulysh <c17819@cray.com>
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I85da18b29ca58f811ecde8ce72ba24373388947e
Reviewed-on: https://review.whamcloud.com/41403
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andriy Skulysh <askulysh@gmail.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Fri, 2 Apr 2021 04:47:32 +0000 (12:47 +0800)]
LU-14579 flr: mirror unlink and split race
- protect lod_object::ldo_comp_entries during
lod_obj_for_each_stripe(), since other thread could change the
ldo_comp_entries at the same time.
- protect LOD in-memory layout during layout change
layout_{add|set|del} and purge_mirror.
- fix lock-tx order in mdd_unlink: start the transaction and then
take locks. (introduced in commit
55d5235354d49aee0a330ad64beef4ed9004a27f)
- Add test case for mirror split and unlink race.
Fixes:
55d5235354 ("LU-14579 flr: GPF in lod_sub_declare_destroy")
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: Ic54245c8755f660087fce46d1cad0ef7fa091245
Reviewed-on: https://review.whamcloud.com/43369
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Sebastien Piechurski [Fri, 16 Apr 2021 20:37:50 +0000 (22:37 +0200)]
LU-14619 utils: mount.lustre max_sectors_kb help message
Document the max_sectors_kb option in the usage message of
mount.lustre.
Test-Parameters: trivial=true
Signed-off-by: Sebastien Piechurski <sebastien.piechurski@atos.net>
Change-Id: I6fda43c17877b471fead4dbae1045cf82bd621d9
Reviewed-on: https://review.whamcloud.com/43350
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Jian Yu [Tue, 13 Apr 2021 05:12:27 +0000 (22:12 -0700)]
LU-13783 libcfs: add cfs_kallsyms_lookup_name()
The inline kallsyms_lookup_name() added by
commit
d7249d9d70a caused the following failures:
libcfs/include/libcfs/linux/linux-misc.h:150:21:
error: conflicting types for ‘kallsyms_lookup_name’
150 | static inline void *kallsyms_lookup_name(char *func)
| ^~~~~~~~~~~~~~~~~~~~
include/linux/kallsyms.h:76:15:
note: previous declaration of ‘kallsyms_lookup_name’ was here
76 | unsigned long kallsyms_lookup_name(const char *name);
| ^~~~~~~~~~~~~~~~~~~~
This patch removes the inline kallsyms_lookup_name() definition
from linux-misc.h and adds cfs_kallsyms_lookup_name() to wrap
kallsyms_lookup_name() if it is exported or return NULL in case of
kallsyms_lookup_name() is not exported.
Fixes:
d7249d9d70a ("LU-13783 libcfs: provide fallback kallsyms_lookup_name()")
Change-Id: I4b2d4499948a8586b48db68484491ec76c3a609d
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/43296
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Vitaly Fertman [Fri, 25 Dec 2020 23:12:50 +0000 (02:12 +0300)]
LU-14592 lfsck: SEL files support
lfsck works directly on the mdt, and therefore it can see SEL magic,
handle it properly in the lfsck code
check the extent range alignment by stripe size, as done in other
places, not by MIN_STRIPE_SIZE
Signed-off-by: Vitaly Fertman <c17818@cray.com>
Change-Id: Iae9b0583f837f107eb0e5eb36eeb70643b92a12b
HPE-bug-id: LUS-9686, LUS-9639
Reviewed-on: https://es-gerrit.dev.cray.com/158202
Reviewed-on: https://es-gerrit.dev.cray.com/158287
Reviewed-on: https://es-gerrit.dev.cray.com/158216
Reviewed-on: https://es-gerrit.dev.cray.com/158463
Reviewed-by: Alexander Boyko <c17825@cray.com>
Tested-by: Elena Gryaznova <c17455@cray.com>
Reviewed-by: Alexey Lyashkov <c17817@cray.com>
Reviewed-on: https://review.whamcloud.com/43234
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Elena Gryaznova <c17455@cray.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Fri, 26 Mar 2021 16:28:18 +0000 (11:28 -0500)]
LU-14566 lnet: Skip discovery in LNetPrimaryNID if DD disabled
If discovery is disabled locally then the discovery thread will not
modify any peer objects as a result of the discovery process. Thus,
the primary NID of any peer we're asked to discover will not change
as a result of discovery. Therefore, we do not need to actually
perform discovery in LNetPrimaryNID() if discovery is disabled
locally. Since this routine can result in long client mount times
when a Lustre server is down we should avoid this unnecessary
discovery.
Test-Parameters: trivial
HPE-bug-id: LUS-9887
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I6d188e16422ad47a146d52bb24cdd1b77a30aa71
Reviewed-on: https://review.whamcloud.com/43141
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Mon, 22 Mar 2021 22:22:53 +0000 (09:22 +1100)]
LU-14487 libcfs: remove references to Sun Trademark.
"lustre" is no longer a Trademark of Sun Microsystems. There is no
need to acknowledge the trademark in every file, so just remove all
these claims.
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: Ife96ed8a26fd56a3c91933ae0a6b96784a8cc70a
Reviewed-on: https://review.whamcloud.com/42137
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Mikhail Pershin [Sun, 28 Feb 2021 09:24:12 +0000 (12:24 +0300)]
LU-14430 mdt: fix maximum ACL handling
Having maximum ACL cause big reply buffer and in that case
server could return -ERANGE in mdt_pack_acl2body() expecting
a client to resend RPC with bigger buffer. The problem is
that even in that case server can return -ERANGE causing
userspace tool to get this error after all.
Instead of estimating reply sizes in mdt_pack_acl2body()
let's just rely on mdt_fix_reply() code which does buffer
grow when it is needed
- add more credits for osd_create in ldiskfs because it
copies also default ACLs during create
- remove code returning -ERANGE in mdt_pack_acl2body() and
rely on mdt_fix_reply() reply buffers grow
- test is added to create as many ACLs as possible
Test-Parameters: env=ONLY=103e testlist=sanity
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: If7af5c61f89ee1220d7982d4c61a7357051a811c
Reviewed-on: https://review.whamcloud.com/42013
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Mr NeilBrown [Sun, 18 Apr 2021 00:32:13 +0000 (20:32 -0400)]
LU-8837 lustre: move lu_tgt_pool out of obd_target.h
'struct lu_tgt_pool' is the only part of obd_target.h that is needed
on the client.
So move it and related declarations to lu_object.h.
Then obd_target.h does not need to be included by lu_object.h,
and it will only be included server-side;
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: Ia578d766fb7fae6ae2fbcfa651fe5b5264b1ff14
Reviewed-on: https://review.whamcloud.com/41951
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Tue, 9 Feb 2021 02:33:31 +0000 (13:33 +1100)]
LU-14428 libcfs: simplify task management in tracefile.c
The waitqueue, mutex, and two completions are not needed.
We can use kthread_stop/kthread_should_stop to synchronize
shutdown, cmpxchg() to ensure only one task is started, and a simple
wake_up_process() to wake the process.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I45390c2cb58b09a85033a7006412a0e2033130c5
Reviewed-on: https://review.whamcloud.com/41492
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Fri, 11 Dec 2020 18:04:32 +0000 (12:04 -0600)]
LU-13806 lnet: Ensure proper peer, peer NI, peer net hierarchy
The MR design dictates that the peer nets and peer NIs are ordered
such that the peer net and peer NI for a peer's primary NID appears
first, followed by other peer NIs in the primary NID's peer net,
followed by other peer nets/NIs. This ordering is broken and it can
result in tripping an assertion if the primary NID of a peer is
deleted. Modify lnet_peer_attach_peer_ni() to check whether the
NI being attached is the peer's primary, and place it, and its
associated peer net, appropriately.
Modify lnet_peer_set_primary_nid() so that it updates the
lp_primary_nid before calling lnet_peer_add_nid() so that
lnet_peer_attach_peer_ni() can detect the situation where the
primary is changing and act appropriately.
Finally, modify lnet_peer_merge_data() to enforce the hierarchy
after it has finished merging the contents of the ping buffer. This
ensures we maintain the correct hierarchy in certain edge cases where
we've needed to reconcile two peers. e.g. if a peer adds a new
interface, the discovery push may arrive from that new interface
which will result in a second peer object being created which will
need to be reconciled with the original peer object.
HPE-bug-id: LUS-9630
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I8397a24ba1ba0bba33846e7e97b8d60a8f26a1be
Reviewed-on: https://review.whamcloud.com/40985
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Wed, 9 Dec 2020 20:38:57 +0000 (14:38 -0600)]
LU-14206 lnet: Router ping timeout with discovery disabled
Discovery pings are used to determine the health of gateways and
associated routes. Ping replies from gateways with dynamic discovery
(DD) disabled (or if DD is disabled locally) are handled in
a special routine, lnet_router_discovery_ping_reply(), but this
function and related code doesn't handle the case where a discovery
ping hits the response tracker timeout and is unlinked by the
monitor thread. In this case, an UNLINK event is generated and we
do not call the lnet_router_discovery_ping_reply(). For gateways
with DD enabled (and DD enabled locally), we handle this case
in lnet_router_discovery_complete(). If discovery failed then
lp_dc_error is set and we mark all routes down for the gateway. We
can simply extend this logic to the case of gateways w/DD disabled
(or DD disabled locally).
Test-Parameters: trivial
Fixes:
2832478194 ("LU-13029 lnet: fix asym routing with multi-hop")
HPE-bug-id: LUS-9612
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I009c69d4f8990b72d83d9426c782c0e55c1023a4
Reviewed-on: https://review.whamcloud.com/40923
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Thu, 13 Aug 2020 05:16:24 +0000 (15:16 +1000)]
LU-13933 tests: remove some unnecessary back-slashes.
Various scripts use "\ " where the "\" isn't needed.
In an 'awk' pattern, using "\ " is wrong.
In the arg to 'tr', there is no need to '\' a space.
In shell code, <<" foo ">> is easier to read than <<\ foo\ >>.
Also:
In shell code <<name="value">> can be <<name=value>> if <<value>>
doesn't contain unquoted spaces. If value does contain quoted <<">>,
the extra quotes make it hard to read.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I53d0522071016286b4ef9f576f4a4e46b1ba2d6d
Reviewed-on: https://review.whamcloud.com/39750
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Chris Horn [Fri, 21 Aug 2020 19:42:48 +0000 (14:42 -0500)]
LU-13569 lnet: Deprecate lnet_recovery_interval
We no longer use a static recovery interval, so remove its remaining
uses and add warning that it has been deprecated.
Test-Parameters: trivial
HPE-bug-id: LUS-9109
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Iedc79803ef5b7ba041a531961eb77acd338abfb5
Reviewed-on: https://review.whamcloud.com/39722
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Fri, 21 Aug 2020 20:16:43 +0000 (15:16 -0500)]
LU-13569 lnet: Recover local NI w/exponential backoff interval
Use an exponential backoff algorithm to determine the interval at
which unhealthy local NIs are ping'd
Introduce lnet_ni_add_to_recoveryq_locked() which handles checking
pre-conditions for whether the NI should be added to the recovery
queue, and takes a ref on the NI as appropriate.
Test-Parameters: trivial
HPE-bug-id: LUS-9109
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Idb3789366b2e450837989f9a12eb2d598f80081c
Reviewed-on: https://review.whamcloud.com/39721
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Wed, 20 May 2020 06:53:33 +0000 (00:53 -0600)]
LU-13705 utils: improve llstat/llobdstat usability
Allow llstat to work on the client with minimal effort, by allowing
client OBD device types like "llstat -i 1 llite" or "llstat -i 1 osc",
in addition to the existing "mdt" or "ost_io" RPC-level shortcuts.
Allow specifying stats with the same syntax as "lctl get_param" and
"lctl list_param" like "llstat -i 5 myth-OST0002" or similar specific
stats.
Make the code and usage between llstat and llobdstat more uniform,
so that it is easier to switch between using one and the other.
Fix the display of llstat to fit into 80 columns by default, but
allow it to detect if the terminal is wider and print more columns
(e.g. stddev) if there are more columns in the terminal. llobdstat
always fit within 80 columns, so this is not necessary there.
Fix llite.*.read_ahead_stats to be usable by llstat.
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@dilger.ca>
Change-Id: I09c714018925e8d0a17a63eee673ae18512540e5
Reviewed-on: https://review.whamcloud.com/39178
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Emoly Liu <emoly@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Mon, 21 Oct 2019 09:22:16 +0000 (03:22 -0600)]
LU-12885 llapi: use enum llapi_layout_get_flags
For the llapi_layout_get_by_{fd,fid,path,xattr}() functions use a new
enum llapi_layout_get_flags as an argument to make it clear what flags
are passed, rather than a generic "uint32_t flags" argument.
Rename the flags to be consistent between the different functions,
instead of having separate flags for llapi_layout_get_by_xattr() and
add a LLAPI_ prefix to avoid potential namespace conflicts.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I671f1a3b96df4fa93e9529a373ceb450b13ebbe5
Reviewed-on: https://review.whamcloud.com/36524
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Fri, 16 Apr 2021 06:03:00 +0000 (00:03 -0600)]
LU-6142 mdc: include linux/idr.h for referenced code
Include the <linux/idr.h> header in files that references IDR
functionality. Don't depend on its indirect inclusion elsewhere.
Test-Parameters: trivial
Fixes:
66172e3274ca ("LU-13238 ofd: add OFD access logs")
Fixes:
d0423abc1adc ("LU-12506 changelog: support large number of MDT")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Icdd03e15d31eabc4a1363d1757fc4db7723ebbe5
Reviewed-on: https://review.whamcloud.com/43346
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alexander Boyko [Thu, 8 Apr 2021 08:23:54 +0000 (04:23 -0400)]
LU-14598 ofd: fix for IDIF sequence at ofd_preprw_write
During recovery write operation could create and load a sequence
if it comes before creation request from MDT0. ofd_preprw_write() uses
wrong logic for taking sequence for IDIF fids. And if oid overflows
32bit and takes a part at IDIF sequence, write request loads wrong
ofd sequence. And after that it is used for other IO. The next
create from MDT0 cause an error:
Too many FIDs to precreate OST replaced or reformatted...
The test 122b reproduce issue when OST using a wrong sequence for
MDT0 IDIF. This error requires objects id grater than 32bit, and
write request during recovery, it should be processed before a create
requset from MDT0.
For a visible error at console the last object id should be
1<<32 + (OST_MAX_PRECREATE * 5). Error is
lustre-OST0000: Too many FIDs to precreate OST replaced or
reformatted: LFSCK will clean up
HPE-bug-id: LUS-9595
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I09e6f88b1f0d03fec59b24ef096cbc7baa5388ae
Reviewed-on: https://review.whamcloud.com/43248
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sergey Cheremencev <sergey.cheremencev@hpe.com>
Artem Blagodarenko [Thu, 4 Jun 2020 14:40:03 +0000 (10:40 -0400)]
LU-13939 mgs: warn if nid was not processed during replace_nids
process_command() trying to add configuration for each uuid from
list and do not show any message if record_add_uuid() fails. This
can lead to misunderstanding during configuration.
Add warning message if nid can not be added.
Change-Id: Id0a7216daf3eb7e1b8f94eaebd42624b309049d0
hpe-bug-id: LUS-2653
Signed-off-by: Artem Blagodarenko <artem.blagodarenko@hpe.com>
Reviewed-on: https://es-gerrit.dev.cray.com/157402
Reviewed-by: Vladimir Saveliev <c17830@cray.com>
Reviewed-by: Alexander Boyko <c17825@cray.com>
Tested-by: Alexander Lezhoev <c17454@cray.com>
Reviewed-on: https://review.whamcloud.com/39795
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Patrick Farrell [Wed, 8 Apr 2020 14:05:25 +0000 (10:05 -0400)]
LU-6179 llite: Remove last lockahead old compat
The CEF_NONBLOCK flag in cld_enq_flags is required for the
old Cray-only server release of lockahead. In the more
recent versions, the required nonblocking behavior (on the
server side) is associated with LDLM_FL_SPECULATIVE, not
with the combination of LDLM_FL_NO_EXPAND and
LDLM_FL_BLOCK_NOWAIT (as was done in the old
implementation).
Now we control 'speculative' or not with the async flag
from userspace.
Now that we've removed OBD_CONNECT_LOCKAHEAD_OLD support
from the client, we should be good to go there.
The existing testing explores both sync and async requests,
and should be enough to verify this is OK.
Signed-off-by: Patrick Farrell <farr0186@gmail.com>
Change-Id: Ia3605eb22e6a6a88fb6e431286b697e2e2a1908e
Reviewed-on: https://review.whamcloud.com/38179
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Alex Zhuravlev [Wed, 14 Apr 2021 05:13:25 +0000 (08:13 +0300)]
LU-14613 tests: fix sanity/60f on a local setup
as fail_loc is shared among client and server on a local setup,
it can hit just before rm -f $TMP/$tfile*. given it's marked
with FAIL_ONCE, the log won't be dumped again.
to fix this do cleanup rm earlier.
Test-Parameters: trivial
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: Ifd70335c44bfe2e1970e1441837dcb3545c40ab0
Reviewed-on: https://review.whamcloud.com/43308
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Bobi Jam [Fri, 9 Apr 2021 04:53:07 +0000 (12:53 +0800)]
LU-14597 flr: allow multiple primary mirrors
Users can set "prefer" flag on any mirror/component, so the IO should
not report error if multiple mirrors are encountered.
Rename lod_mirror_entry::lme_primary to lme_prefer to avoid confusion.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I45748e56e38985a0d9028792ba3d976a4e03efb8
Reviewed-on: https://review.whamcloud.com/43247
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Mr NeilBrown [Mon, 22 Mar 2021 22:30:42 +0000 (09:30 +1100)]
LU-14487 modules: remove references to Sun Trademark.
"lustre" is no longer a Trademark of Sun Microsystems. There is no
need to acknowledge the trademark in every file, so just remove all
these claims.
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I66941494eabc54bedf85079c5b85701187f2a8f1
Reviewed-on: https://review.whamcloud.com/42139
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Aurelien Degremont <degremoa@amazon.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Mr NeilBrown [Mon, 22 Mar 2021 22:24:37 +0000 (09:24 +1100)]
LU-14487 lnet: remove references to Sun Trademark.
"lustre" is no longer a Trademark of Sun Microsystems. There is no
need to acknowledge the trademark in every file, so just remove all
these claims.
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: If7e61a7583ca80f024638b6f04382898c75acc91
Reviewed-on: https://review.whamcloud.com/42138
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Mr NeilBrown [Thu, 21 Jan 2021 03:37:54 +0000 (14:37 +1100)]
LU-14352 various: only use wake_up_all() on exclusive waitqs
wake_up_all() is not necessary of wait_queues which are not the
subject of an exclusive waiter. When all waiters are non-exclusive,
wake_up() will wake them all up.
Use of wake_up_all() suggests to the reader that the queue is subject
to exclusive waits. When that is not the case, the usage can cause
confusion.
So change all wake_up_all() on non-exclusive waitqueues to wake_up().
The only wait_queues on which exclusive waits are requested are:
ws_waitq ibs_waitq kss_waitq ksnd_connd_waitq
blp_waitq imp_replay_waitq cl_mod_rpcs_waitq cl_cache_waiters
cl_destroy_waitq scp_waitq
All others now only use wake_up().
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I8e4a82747a93a50344cf545f1ae51fffc432b788
Reviewed-on: https://review.whamcloud.com/41289
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Fri, 15 Jan 2021 01:21:11 +0000 (18:21 -0700)]
LU-12125 tests: allow racer to specify extra tasks
Add the RACER_EXTRA environment variable to allow racer.sh to run
extra tasks.
Test-Parameters: trivial testlist=racer env=DURATION=3600,RACER_EXTRA=file_rename:10,dir_create:10,dir_remote:10,dir_migrate:3
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ic810a248a2dd665a163e0efea8c9af0e4461e09b
Reviewed-on: https://review.whamcloud.com/41231
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Elena Gryaznova <c17455@cray.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 14 Jan 2021 23:43:34 +0000 (16:43 -0700)]
LU-12125 mds: allow parallel directory rename
Allow rename of subdirectories in the same parent directory to be
done in parallel, by only taking the DLM lock on the parent FID,
without locking the global LUSTRE_BFL_FID (Big Filesystem Lock).
There will still be proper serialization from the parent directory
FID lock for other rename operations affecting that directory or the
subdirectories themselves. Since the subdirectories are known to be
within the same parent, there is no concern of "finding the parent"
to determine locking order.
The same compatibility rules apply as with parallel file renames.
We no longer need the target file type in this case, since the
source and target file type are verfied to be the same under lock.
We may again need a file type check for regular file renames across
different parent directories/shards, so it may still be useful.
Test-Parameters: testlist=racer env=DURATION=3600
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I9db8acb515f5274fa09f5a5f3d18504d4d3ebbe5
Reviewed-on: https://review.whamcloud.com/41230
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Arshad Hussain [Mon, 14 Dec 2020 15:30:30 +0000 (10:30 -0500)]
LU-14160 fallocate: Add punch mode to fallocate
This patch adds fallocate(2) punch operation
(FALLOCATE_FL_PUNCH_HOLE) mode support for ldiskfs backend
OSD and for OSC/OST
Test cases sanity/150{f,g} are added for verification.
FSX test was modified:
- add 'punch' operation to an output
- fix 'No space' problem when fallocate length become negative
- fix wrong bytes number in output
Test-Parameters: testlist=sanity ostsizegb=12 env=ONLY="150f 150g"
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I0c180d413efdf995823e25d5c340013bec0c8611
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/40877
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 7 Nov 2020 07:53:28 +0000 (00:53 -0700)]
LU-930 misc: limit CDEBUG console message frequency
Some CDEBUG() messages have variable message levels, but if printed
to the console it is not rate limited like CWARN() and CERROR():
server_bulk_callback()) event type 5, status -110
server_bulk_callback()) event type 5, status -110
server_bulk_callback()) event type 5, status -110
:
Instead, use CDEBUG_LIMIT() for those messages to limit them.
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I9081398c7d014b2873e764dc283ce2f4623ebbe5
Reviewed-on: https://review.whamcloud.com/40571
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Shaun Tancheff [Thu, 15 Apr 2021 12:07:50 +0000 (08:07 -0400)]
LU-13344 libcfs: Abstract proc_fs with proc_ops
Linux 5.6 introduces proc_ops with v5.5-8862-gd56c0d45f0e2
proc: decouple proc from VFS with "struct proc_ops"
Map proc_ops and it's members to file_operations and
the appropriate members for older kernels.
One remaining 'PROC_OWNER()' macro is left to deal with
proc_ops being unable to sensibly map the owner member.
Test-Parameters: trivial
HPE-bug-id: LUS-8589
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I3d8940a91b331c4f6bb31a9432194cc082c9cecd
Reviewed-on: https://review.whamcloud.com/37873
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mikhail Pershin [Mon, 15 Feb 2021 12:25:38 +0000 (15:25 +0300)]
LU-14433 llite: do fallocate() size checks under lock
Check about fallocate() range vs file size in vvp_io_setattr_start()
instead of ll_fallocate() so inode size cannot be changed by pending
write or truncate. This implies that IO is initialized already and
requires changes in LOV to update sub-IOs with proper inode size and
valid size attribute values
Fix also vvp_io_setattr_lock() to don't include fallocate_end in
lock range
Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: I8c1d295464be24d6638005bc9d46cff50656cf11
Reviewed-on: https://review.whamcloud.com/41668
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
NeilBrown [Tue, 27 Aug 2019 16:13:50 +0000 (12:13 -0400)]
LU-4801 ldlm: discard l_lock from struct ldlm_lock.
This spinlock (l_lock) is only used to stablise the l_resource
pointer while taking a spinlock on the resource.
This is not necessary - it is sufficient to take the resource
spinlock, and then check if l_resource has changed or not. If it
hasn't then it cannot change until the resource spinlock is dropped.
We must ensure this is safe even if the resource is freed before
lock_res_and_lock() managed to get the lock. To do this we use
call_rcu() to free the resource. This means that if we find a
resource after taking the RCU read lock, then it is always safe to
take and then drop the spinlock. After taking the spinlock, we can
check if it is more generally safe to use.
Discarding l_lock shrinks 'struct ldlm_lock' which helps save memory.
Note that it would be cleaner to use SLAB_TYPESAFE_BY_RCU instead of
call_rcu(), but this is not correctly supported on all platforms that
lustre supports. To simplify a transition to SLAB_TYPESAFE_BY_RCU
once that is usable, an 'init_once' function is used to initialize the
spinlock as would be needed in that case.
Signed-off-by: Mr NeilBrown <neilb@suse.com>
Change-Id: Ief5af0b3bc9bed0cd32673e4d62ce51c83846418
Reviewed-on: https://review.whamcloud.com/39811
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Thu, 27 Aug 2020 03:50:16 +0000 (13:50 +1000)]
LU-6142 lustre: remove some unnecessary code.
The field 'targets_proc_entry' is never set, so remove it and all
reference to it.
lov_dump_pool() is never used, so remove it.
min_u64() is never used - remove it.
max_u64() is used, but 'min3()' from linux/kernel.h makes
the code clearer, so use that instead.
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I3ed6abc1b23e611bd4a573fa78981955a494c344
Reviewed-on: https://review.whamcloud.com/39739
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Yang Sheng [Thu, 18 Feb 2021 15:22:09 +0000 (23:22 +0800)]
LU-14048 obd: fix race between connect vs disconnect
The export nid hash would be removed in class_disconnect, But
still a race window exists in target_handle_connect to add it back.
Then the process of cleanup will wait infinity.
Signed-off-by: Yang Sheng <ys@whamcloud.com>
Change-Id: I9ad3edbd040b81e2aef7ae22494302d9a478d65b
Reviewed-on: https://review.whamcloud.com/41687
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Mon, 12 Apr 2021 18:53:07 +0000 (12:53 -0600)]
LU-13212 osc: fall back to vmalloc for large RPCs
For large RPC sizes (16MB+) the page array (4096 brw_page) can
become very large (128KB+ with fscrypt) and should fall back to
vmalloc() if kmalloc() fails due to memory fragmentation.
The mdc/mdt allocations are currently limited to 1MB for readdir
RPCs, but it doesn't hurt to prepare them for larger RPCs from
clients in the future if this limit is increased.
Fixes:
51b32ac2b9b8 ("LU-7990 rpc: increase bulk size")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I56805f5701d6850412664ce0681a1456b9405580
Reviewed-on: https://review.whamcloud.com/43281
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Wang Shilong <wshilong@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Elena Gryaznova [Tue, 6 Apr 2021 07:13:41 +0000 (10:13 +0300)]
LU-14585 tests: use striped ha_test_dir
currently ha.sh has the ability to create the clients
striped directories with different stripe parameters.
We also need the ability to create working striped
directory (ha_test_dir) to have the chance to replicate
the issues hit on directory tree where child directory
stripe settings differ from parent ones.
Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-9621
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Change-Id: I77612c360f0bf407bd0298f827b409b4a288540f
Reviewed-on: https://review.whamcloud.com/43216
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Vladimir Saveliev <c17830@cray.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
James Simmons [Mon, 5 Apr 2021 21:04:27 +0000 (17:04 -0400)]
LU-8066 lov: move stripesize to sysfs
One lonely simple proc file exist for lov. Move stripesize to
sysfs.
Change-Id: I4db660f0e7af4d69c697f8c73547a245108adb9b
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/43212
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Tested-by: Maloo <maloo@whamcloud.com>
Jian Yu [Mon, 5 Apr 2021 08:16:54 +0000 (01:16 -0700)]
LU-13783 lnet: remove kernel_setsockopt() from lnet_sock_listen()
Linux 5.8 removes kernel_setsockopt(). In Lustre commit
99d9638d6c0, kernel_setsockopt() was removed from Lustre codes
by using direct access or helper calls. However, the one in
lnet_sock_listen() was not removed. This patch removes it by
using the codes from previously defined kernel_setsockopt()
directly.
Fixes:
99d9638d6c0 ("LU-13783 libcfs: support removal of kernel_setsockopt()")
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Change-Id: I5b74bf113185c0c9af5c81ca6cd346f1be7a4720
Reviewed-on: https://review.whamcloud.com/43207
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Elena Gryaznova [Mon, 22 Mar 2021 17:34:50 +0000 (20:34 +0300)]
LU-14546 tests: set smbpasswd correctly
For RHEL 8.2 the smbpasswd tool requires password
confirmation.
Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-9761
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I367fca4253f1b06dae220921106d321e52d10bc7
Reviewed-on: https://review.whamcloud.com/42132
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Elena Gryaznova [Mon, 22 Mar 2021 17:16:18 +0000 (20:16 +0300)]
LU-14545 tests: erase failover.node parameter
On the "failover pair" Lustre configuration, like
mds1_HOST=host1
mds2_HOST=host2
mds1failover_HOST=host2
mds2failover_HOST=host1
fs2mdsdev can not be mounted on mds1_HOST because of fs2mdsdev
has failover.node=<mds1_HOST>. Mount fails as:
Denying initial registration attempt from nid <mds1_HOST>@tcp,
specified as failover.
Patch erases fs2mdsdev failover.node parameter.
Test-Parameters: trivial testlist=conf-sanity envdefinitions=ONLY=32
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-9821
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: Id96cb12704fc79f32ea998702bb457d2f683a7c8
Reviewed-on: https://review.whamcloud.com/42131
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Vladimir Saveliev <c17830@cray.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Li Dongyang [Fri, 19 Mar 2021 10:21:58 +0000 (21:21 +1100)]
LU-14536 obi2lnd: don't try to reconnect if there's no listener
For each discovery we try to reconnect up to retry_count times,
default to 5. during MDT mount process conf log, there will be
multiple discovery made for each OST.
If the OSTs are not up, the mount will have a long time out.
Change-Id: If1d854216d2f26089c52d3fb501092b7f48a444d
Test-Parameters: trivial
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-on: https://review.whamcloud.com/42111
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Amir Shehata <ashehata@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Li Dongyang [Fri, 19 Mar 2021 09:26:28 +0000 (20:26 +1100)]
LU-14536 o2iblnd: don't resend if there's no listener
If there's no listener at remote peer, we will
get IB_CM_REJ_INVALID_SERVICE_ID, currently we
will try to resend which makes the discovery longer
than necessary when connecting to a node which is
not up.
Use -EHOSTUNREACH instead of -ECONNREFUSED,
so we don't end up queued for resend.
Change-Id: Ifaf14bc3ada2e2469669285917e366af669817e2
Test-Parameters: trivial
Signed-off-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-on: https://review.whamcloud.com/42109
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Sat, 23 Jan 2021 10:28:26 +0000 (18:28 +0800)]
LU-14366 mdt: lfs mkdir should return -EEXIST if exists
'lfs setdirstripe' will try restripe if target exists, however
it's confusing to get -ENOTSUPP or -EALREADY for 'lfs mkdir', while
the latter invokes the same function as 'lfs setdirstripe'.
Pack MDS_OPEN_CREAT flag in request for 'lfs mkdir', and MDT won't
try restripe if it's set.
Add sanity 230s.
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I7b7ed04ee0b150253ff4d13bbdf1fe847d8f577c
Reviewed-on: https://review.whamcloud.com/41329
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yingjin Qian <qian@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Fri, 10 Jul 2020 18:52:01 +0000 (13:52 -0500)]
LU-13780 lnet: Leverage peer aliveness more efficiently
When an LNet router is revived after going down, remote peers may
discover it is alive before we do. Thus, remote peers may use it
as a next-hop, and we may start receiving messages from it while we
still consider it to be dead. We should mark router peers as alive
when we receive a message from them.
If an LNet router does not respond to a discovery ping, then we
currently mark all of its NIs as DOWN. This can actually slow down
the process of returning a route to service. If we receive a message
from a router, in the manner described above, then we can safely
return the router to service. We already set the status of the router
NI we received the message from to UP, but the remote NIs will still
be DOWN and thus the route will be considered down until we get a
reply to the next discovery ping.
When selecting a route, we only consider the aliveness of a gateway's
remote NIs if avoid_asym_router_failure is enabled and the route is
single-hop. In this case, as long as the gateway has at least one
alive NI on the remote network then the route is considered UP. In
the situation described above, we know the router has at least one
NI alive because it was used to forward a message from a remote peer.
Thus, when we receive a forwarded message from a router, we can
reasonably set the NI status of all of its NIs that are on the same
peer net as the message originator to UP. This does not impact the
route status of any multi-hop routes because we do not consider the
aliveness of remote NIs for multi-hop routes.
Similarly, we can set the cached lr_alive value to up for any routes
whose lr_net matches the net ID of the message originator NID. This
variable is converted to an atomic_t to get rid of the need for
global locking when updating it.
Test-Parameters: trivial
HPE-bug-id: LUS-9088
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I0170762d78d80e4b70724799cd1ee1301118f25c
Reviewed-on: https://review.whamcloud.com/39350
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Sat, 27 Mar 2021 19:50:33 +0000 (13:50 -0600)]
LU-14175 osd: print inode number with FID in OI scrub
When debugging OI Scrub problems, also print the inode number
with the FID so that it is easier to find the problematic inode.
Otherwise, if the OI is broken it is not easy to find the inode
in question without a full filesystem scan.
Test-Parameters: trivial testlist=sanity-scrub,sanity-lfsck
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I217624ff2116326f86e053bcfacc6f19873ebbe5
Reviewed-on: https://review.whamcloud.com/43153
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Chris Horn [Tue, 14 Jul 2020 04:08:28 +0000 (23:08 -0500)]
LU-13785 lnet: Use lr_hops for avoid_asym_router_failure
In order for the asymmetric route failure avoidance feature to work
properly it needs to know what the hop count of a route should be.
This information is defined by the lr_hops field of the lnet_route.
The lr_single_hop is what discovery was able to determine the hop
count actually is (single or multi) based on the last ping reply.
If a remote interface on a router goes missing, the route may be
classified as multi-hop by discovery, but it should be considered
single-hop for the purposes of avoiding asymmetric route failure.
HPE-bug-id: LUS-9099
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I9c255f9a2175d964661850277808dae96ff7735c
Reviewed-on: https://review.whamcloud.com/39362
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Fri, 2 Apr 2021 04:47:32 +0000 (12:47 +0800)]
LU-14579 flr: GPF in lod_sub_declare_destroy
mirror split and unlink race reveals some problem:
- in mdd_unlink(), protect mdd_declare_unlink() in mdd_write_lock.
- lod_parse_striping() need to free lod's striping in memroy before
parsing on-disk LOVEA.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I44182eb9139c35f57d711ef5f7db65c0ccfca56c
Reviewed-on: https://review.whamcloud.com/43199
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Yingjin Qian <qian@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Lai Siyao [Thu, 14 Jan 2021 09:14:01 +0000 (17:14 +0800)]
LU-14119 lfsck: check linkea if it's newly added
In LFSCK phase one, if new linkea entry is added, and final linkea
entry count is more than one, add file in trace file, so that the
linkea sanity will be checked in phase two.
And in phase two check, if link parent FID can't be mapped to valid
inode, remove it from linkea.
Add sanity-lfsck 1d, which changed parent directory FID in LMA,
therefore the FID in LMA mismatches with parent FID in child linkea,
verify LFSCK can fix such inconsistency.
Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I315983d262110c1e36c3893fa2e51925d96c51a7
Reviewed-on: https://review.whamcloud.com/41261
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Thu, 1 Apr 2021 01:50:31 +0000 (18:50 -0700)]
LU-14577 ldiskfs: support Ubuntu 20.04 kernel 5.4.0-1007
While applying 5.4.0-66-ubuntu20.series ldiskfs patches
to kernel 5.4.0-1007, there is a conflict in
ext4_update_dx_flag() in ubuntu2004/ext4-pdirop.patch.
It turns out the ext4_update_dx_flag() codes in kernel
5.4.0-1007 are the same with those in kernel version
smaller than 5.4.0-66. So, 5.4.0-42-ubuntu20.series works.
This patch fixes lustre-build-ldiskfs.m4 to detect
5.4.0-42-ubuntu20.series for kernel 5.4.0-1007.
Test-Parameters: trivial
Change-Id: I3cd932b8ae2d7c7f4f900b8b18647a4252d100b2
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/43187
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
John L. Hammond [Wed, 31 Mar 2021 17:45:05 +0000 (12:45 -0500)]
LU-14575 ofd: suppress errors on missing parent FID
In ofd_access(), if the parent FID is zero then skip adding an entry
to the OFD access log.
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: Ib518dc1f181a820d99021dd58ab548916e16f29d
Reviewed-on: https://review.whamcloud.com/43184
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Andreas Dilger [Thu, 25 Mar 2021 06:39:07 +0000 (00:39 -0600)]
LU-14550 libcfs: fix setting of debug_path
While it was possible to set "lctl set_param debug_path=path" or
"echo path > /sys/module/libcfs/parameters/libcfs_debug_file_path"
this change does not affect the path used to dump debug logs.
Connect these parameters to the pathname used for the debug log.
Test-Parameters: testlist=sanity env=ONLY=60f,ONLY_REPEAT=30
Fixes:
7092309f325 ("LU-8066 libcfs: migrate to debugfs")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ic18b5b24d1ac939c09637e66a342f5e3622367c3
Reviewed-on: https://review.whamcloud.com/43109
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Bobi Jam [Fri, 19 Mar 2021 10:22:10 +0000 (18:22 +0800)]
LU-14521 flr: delete mirror without volatile file
Rather than opening a volatile file to delete a FLR mirror, this
patch delete sub objects on the specified mirror directly during
the mirror deletion handling.
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I7a5e7488dbc820fdfa312218f363955a35752034
Reviewed-on: https://review.whamcloud.com/42116
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Wed, 17 Mar 2021 01:03:09 +0000 (18:03 -0700)]
LU-14530 kernel: kernel update SLES12 SP5 [4.12.14-122.63.1]
Update SLES12 SP5 kernel to 4.12.14-122.63.1 for Lustre client.
Test-Parameters: trivial clientdistro=sles12sp5 \
env=SANITY_EXCEPT="56oc 430c 817" testlist=sanity
Change-Id: I67ab524ff2dc94c649bc970c7bb1d83009828880
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/42058
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Jian Yu [Wed, 17 Mar 2021 00:50:00 +0000 (17:50 -0700)]
LU-14529 kernel: kernel update SLES15 SP2 [5.3.18-24.52.1]
Update SLES15 SP2 kernel to 5.3.18-24.52.1 for Lustre client.
Test-Parameters: trivial \
env=SANITY_EXCEPT="100 130 136 817" \
clientdistro=sles15sp2 serverdistro=el7.9 \
testlist=sanity
Change-Id: Ifbcfdac3e7dedeb5bde9f4a31575ad5008518c80
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/42055
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
NeilBrown [Mon, 1 Mar 2021 14:15:45 +0000 (09:15 -0500)]
LU-9859 libcfs: simplify capability dropping.
Lustre has a 'squash credentials' concept similar to the "anon_uid"
for nfsd. When accessing a file with squashed credentials, we
need to also drop capabilities.
Linux has cap_drop_fs_set() and cap_drop_nfsd_set(). Rather than
taking a completely different approach, this patch changes lustre
to use this same cap_drop_*_set() approach.
With this change we also drop CAP_MKNOD and CAP_MAC_OVERRIDE
which are probably appropriate, and don't drop
CAP_SYS_ADMIN or CAP_SYS_BOOT which should be irrelevant for
file permission checking
Calling both cap_drop_*_set() seems a bit clumsy, but gets
the job done.
Linux-commit:
f497115d4cf8a430c5d9902ce35716ba5f9c21ef
Change-Id: I2f4f691bc4ad090f6abaa4e13eb473bf8d904b23
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-on: https://review.whamcloud.com/41957
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Mon, 8 Mar 2021 23:05:23 +0000 (10:05 +1100)]
LU-8837 lmv: don't include struct lu_qos_rr in client
The 'lqrr' field in 'struct lu_qos' is not used on the client (lmv).
So make it server-only for use in lod.
- move 'struct lu_qos_rr' into lu_target.h
- protect lq_rr with HAVE_SERVER_SUPPORT
- make lu_qos_rr_init() a static-inline in lu_target,
and call it explicitly from lod instead of from lu_tgt_descs_init()
- protect setting of LQ_DIRTY to in lu_tgt_descs.c with
HAVE_SERVER_SUPPORT
Test-Parameters: trivial
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I019cac560d68688042a02a53bd96b605909acdcd
Reviewed-on: https://review.whamcloud.com/41950
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Mr NeilBrown [Tue, 9 Feb 2021 01:06:24 +0000 (12:06 +1100)]
LU-14428 libcfs: discard cfs_trace_allocate_string_buffer
cfs_trace_allocate_string_buffer() is now only used once, and it is a
simple wrapper for kmalloc(). So discard it and use kmalloc directly.
Signed-off-by: Mr NeilBrown <neilb@suse.de>
Change-Id: I4658f58d3e073be2092e0af1de0d6ecec15da6a6
Reviewed-on: https://review.whamcloud.com/41491
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Aurelien Degremont <degremoa@amazon.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
git://git.whamcloud.com / fs / lustre-release.git / log