Whamcloud - gitweb
fs/lustre-release.git
3 months agoLU-15910 tests: skip sanity/413g for SSK 00/47800/3
Andreas Dilger [Mon, 27 Jun 2022 18:24:37 +0000 (12:24 -0600)]
LU-15910 tests: skip sanity/413g for SSK

When running sanity test_413g under review-dne-selinux-ssk-part-1
it intermittently fails.  Temporarily disable this subtest for
this config until the problem is understood and fixed.

Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Iacda6add8baabd479ea05dff06867f1a7afb23ce
Reviewed-on: https://review.whamcloud.com/47800
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15910 llite: enforce ROOT default on subdir mount 18/47518/4
Lai Siyao [Sat, 21 May 2022 02:21:38 +0000 (22:21 -0400)]
LU-15910 llite: enforce ROOT default on subdir mount

In subdirectory mount, the filesystem-wide default LMV doesn't take
effect. This fix includes the following changes:
* enforce the filesystem-wide default LMV on subdirectory mount if
  it's not set separately.
* "lfs getdirstripe -D <subdir_mount>" should print the
  filesystem-wide default LMV.

Add sanity test_413g.

Signed-off-by: Lai Siyao <lai.siyao@whamcloud.com>
Change-Id: I26de9d02872f0df8918b4ef0765b6b18b84794e6
Reviewed-on: https://review.whamcloud.com/47518
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15900 hsm: don't return error on state change during mount 73/47473/2
Mikhail Pershin [Sat, 28 May 2022 06:59:03 +0000 (09:59 +0300)]
LU-15900 hsm: don't return error on state change during mount

HSM coordinator is started in stopped state always, but
mount may have hsm_control parameters 'disabled'. Such
parameter cause wrong state change so mount would fail
with error.

Treat parameter change from 'stopping/stopped' to 'disabled'
as not critical error, keep state unchanged and report
no error back to a caller.

Signed-off-by: Mikhail Pershin <mpershin@whamcloud.com>
Change-Id: I9d1366423391971b9511c46b6aed39d21ebf637c
Reviewed-on: https://review.whamcloud.com/47473
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15860 socklnd: Duplicate ksock_conn_cb 61/47361/3
Chris Horn [Thu, 12 May 2022 18:16:10 +0000 (13:16 -0500)]
LU-15860 socklnd: Duplicate ksock_conn_cb

If two threads enter ksocknal_add_peer(), the first one to acquire
the ksnd_global_lock will create a ksock_peer_ni and associate a
ksock_conn_cb with it.

When the second thread acquires the ksnd_global_lock it will find the
existing ksock_peer_ni, but it does not check for an existing
ksock_conn_cb. As a result, it overwrites the existing ksock_conn_cb
(ksock_peer_ni::ksnp_conn_cb) and the ksock_conn_cb from the first
thread becomes stranded.

Modify ksocknal_add_peer() to check whether the peer_ni has an
existing ksock_conn_cb associated with it

Fixes: 7766f01e89 ("LU-13641 socklnd: replace route construct")
HPE-bug-id: LUS-10956
Test-Parameters: trivial
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I6c0190a0c1d3321ddd85c763b86ad1f0d32cf2b9
Reviewed-on: https://review.whamcloud.com/47361
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Frank Sehr <fsehr@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15855 enc: enc-unaware clients get ENOKEY if file not found 49/47349/2
Sebastien Buisson [Fri, 13 May 2022 15:03:22 +0000 (17:03 +0200)]
LU-15855 enc: enc-unaware clients get ENOKEY if file not found

To reduce issues with applications running on clients without keys
or without fscrypt support that check for the existence of a file in
an encrypted directory, return -ENOKEY instead of -ENOENT.
For encryption-unaware clients, this is done on server side in the
mdt layer, by checking if clients have the OBD_CONNECT2_ENCRYPT
connection flag.
For clients without the key, this is done in llite when the searched
filename is not in encoded form.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I9a3b7af3a856b7fc7222c61a308ad23168869d57
Reviewed-on: https://review.whamcloud.com/47349
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15839 tests: correct the ZFS grace time for sanity-quota 4a 89/47289/3
Etienne AUJAMES [Wed, 11 May 2022 07:26:01 +0000 (09:26 +0200)]
LU-15839 tests: correct the ZFS grace time for sanity-quota 4a

For  sanity-quota 4a, the grace time is increased from 12s to 20s but
not actually set on filesystem.

Fixes: 3e4c3fdc ("LU-6836 test: re-add test 4a to sanity-quota for ZFS")
Test-Parameters: fstype=zfs testlist=sanity-quota env=ONLY=4a,ONLY_REPEAT=100
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: I2324e818a42a19bc9928f127b1622f1e5274db1f
Reviewed-on: https://review.whamcloud.com/47289
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sergey Cheremencev <sergey.cheremencev@hpe.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
3 months agoLU-15420 build: fixes to support building on Ubuntu 22.04 LTS 33/47133/5
James Simmons [Mon, 25 Apr 2022 17:42:32 +0000 (13:42 -0400)]
LU-15420 build: fixes to support building on Ubuntu 22.04 LTS

Lustre uses the glibc stdarg.h instead of the kernel's version which
causes the following build issue.

lustre/include/lu_object.h:35,
/usr/lib/gcc/x86_64-linux-gnu/11/include/stdarg.h:52: note: this is the
location of the previous definition
        #define va_copy(d,s)    __builtin_va_copy(d,s)

The solution is to use the kernels version of stdarg.h

The second build issue :
update_trans.c:1608:30: error: ‘struct task_struct’ has no member named
                        ‘state’; did you mean ‘__state’?

is due Linux commit 2f064a59a11ff9bc22e52e9678bc601404c7cb34
(sched: Change task_struct::state). The state field was
changed and the barrier macros READ_ONCE()/WRITE_ONCE()
are used to access it now which is the proper thing to do.
Since the check in update_trans.c is equivalent to testing
if the kernel thread is not running, since TASK_RUNNING == 0,
we can just change the code to use task_is_running(). The
task_is_running() was introduced in 5.13.

Test-Parameters: trivial
Change-Id: Ib5985b187c3013fbc513e9962a5f27bed4996f5b
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/47133
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15055 lod: run qmt_pool_* only from the MDT0000 config 59/47059/6
Etienne AUJAMES [Wed, 13 Apr 2022 14:43:12 +0000 (16:43 +0200)]
LU-15055 lod: run qmt_pool_* only from the MDT0000 config

On the first mds (with MDT0000/QMT0000), if there is more than one MDT
target, qmt_pool_{new/del/rem/add} functions will be call several
times on QMT0000 for the same pool.

This resulting to the following error in dmseg:
LustreError: 5659:0:(qmt_pool.c:1390:qmt_pool_add_rem()) add to: can't
scratch-QMT0000 scratch-OST0000_UUID pool pool1: rc = -17

This patch run qmt_pool_* only from a record config from the MDT0000.
The qmt_pool_add_rem() dmesg error is checked on sanity-quota test_1b.

Test-Parameters: mdtcount=2 mdscount=1 testlist=sanity-quota
Fixes: 09f9fb32 ("LU-11023 quota: quota pools for OSTs")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Change-Id: Ia6b712abe25a4d68770753e3408c3321181db1aa
Reviewed-on: https://review.whamcloud.com/47059
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sergey Cheremencev <sergey.cheremencev@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15117 ofd: don't take lock for dt_bufs_get() 29/47029/5
Alex Zhuravlev [Mon, 11 Apr 2022 08:30:44 +0000 (11:30 +0300)]
LU-15117 ofd: don't take lock for dt_bufs_get()

osd_bufs_get() allocates the pages and can cause new transactions
as part of memory release procedure. this would break Lustre's
"start a transaction, then do locking" rule.

Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I58a52af8e2fbbc4823aafc133893e1defedf99b7
Reviewed-on: https://review.whamcloud.com/47029
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15625 sec: fix set_param -P for root squash 39/46739/2
Sebastien Buisson [Tue, 8 Mar 2022 11:07:47 +0000 (12:07 +0100)]
LU-15625 sec: fix set_param -P for root squash

lctl set_param -P needs to be fixed for root squash in order
to properly propagate to clients.
On server (MDT) side, the paramaters are mdt.*.*squash*.
On client side, the parameters are llite.*.*squash*.
So if the setting on MGS side is done as
set_param -P *.*.root_squash and
*.*.nosquash_nids, it works fine. But if it is done as
set_param -P mdt.*.root_squash, this setting is not applied to
client side.
The solution is to have the settings translated into
*.*.root_squash and *.*.nosquash_nids to make both sides happy.

Also, to ensure client vs. server consistency, prevent
set_param -P llite.*.root_squash.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I8984c9d9024d7a053e548ed15d1321b281d9940f
Reviewed-on: https://review.whamcloud.com/46739
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15706 llog: deal with "SKIP" pool llog records correctly 51/46951/9
Emoly Liu [Mon, 25 Apr 2022 02:56:55 +0000 (10:56 +0800)]
LU-15706 llog: deal with "SKIP" pool llog records correctly

If the requested "start" llog records by one ioctl are just the
useful ones "protected" by one marker, they will don't know their
cfg_flags(e.g. "SKIP" or not), and then will be mis-labeled in
class_config_yaml_output().
To fix this issue, this patch does the following changes:
- In kernel space, remember the marker cfg_flags for 10 records
  earlier than the requested "start" in function llog_print_cb(),
  so that the "start" can be output with its correct cfg_flags.
- In user space, since the pool_new/add record will be marked as
  "SKIP" if its corresponding pool_destroy/remove record is logged
  later in mgs_pool_cmd(), these "SKIP" records won't be printed
  by function jt_llog_print_iter(), so lpd_ost_num doesn't need to
  be decreased in callback function llog_search_pool_cb() as well,
  otherwise, it will cause "lctl pool_destroy" error.

Test-Parameters: standalonemgs=true testlist=ost-pools
Test-Parameters: standalonemgs=true testlist=conf-sanity env=ONLY=123,HONOR_EXCEPT=y
Fixes: 2a5b50d20717 ("LU-15142 lctl: fixes for set_param -P and llog_print")
Signed-off-by: Emoly Liu <emoly@whamcloud.com>
Change-Id: Ie45127ac8b80a75eaeb7158559c690da52eef103
Reviewed-on: https://review.whamcloud.com/46951
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 clio: remove cpo_assume, cpo_unassume, cpo_fini 73/47373/4
John L. Hammond [Mon, 16 May 2022 21:42:44 +0000 (16:42 -0500)]
LU-10994 clio: remove cpo_assume, cpo_unassume, cpo_fini

Remove the cl_page methods cpo_assume, cpo_unassume, and
cpo_fini. These methods were only implemented by the vvp layer and so
they can be easily inlined into cl_page_assume() and
cl_page_unassume(). Remove vvp_page_delete() by inlining its contents
to cl_page_delete0().

Change-Id: I260c5593983bac6742cf7577c26a4903e95ceb7c
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47373
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 clio: remove cpo_own and cpo_disown 72/47372/4
John L. Hammond [Wed, 4 May 2022 20:44:03 +0000 (15:44 -0500)]
LU-10994 clio: remove cpo_own and cpo_disown

Remove the cpo_own and cpo_disown methods from struct
cl_page_operations. These methods were only implemented by the vvp
layer so they can be inlined into cl_page_own0() and
cl_page_disown(). Move most of vvp_page_discard() and all of
vvp_transient_page_discard() into cl_page_discard().

Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I3f156d6ca3e4ea11c050b2addda38e84a84634b9
Reviewed-on: https://review.whamcloud.com/47372
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 clio: remove cl_page_export() and cl_page_is_vmlocked() 41/47241/5
John L. Hammond [Wed, 4 May 2022 21:03:34 +0000 (16:03 -0500)]
LU-10994 clio: remove cl_page_export() and cl_page_is_vmlocked()

Remove cl_page_export() and cl_page_is_vmlocked(), replacing them with
direct calls to PageSetUptodate() and PageLoecked().

Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I883d1664f4afc7a1d4006f9f4833db8125c0e8f5
Reviewed-on: https://review.whamcloud.com/47241
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 echo: remove client operations from echo objects 40/47240/5
John L. Hammond [Fri, 6 May 2022 17:30:10 +0000 (12:30 -0500)]
LU-10994 echo: remove client operations from echo objects

Remove the client (io, page, lock) operations from echo_client
objects. This will facilitate the simplification of CLIO.

Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: If9e55c7d54c171aa2e1bcf272641c2bd6be8ad48
Reviewed-on: https://review.whamcloud.com/47240
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 test: remove netdisk from obdfilter-survey 39/47239/6
John L. Hammond [Fri, 6 May 2022 17:06:57 +0000 (12:06 -0500)]
LU-10994 test: remove netdisk from obdfilter-survey

Remove the netdisk case from obdfilter-survey. Remove subtests that
use echo_client over osc devices.

Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I260001241cee3027f68e62077e5817221bd0c08b
Reviewed-on: https://review.whamcloud.com/47239
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15593 mdt: Add option to disable use of SOM 83/46683/7
Patrick Farrell [Mon, 7 Mar 2022 20:31:34 +0000 (15:31 -0500)]
LU-15593 mdt: Add option to disable use of SOM

There's currently no way to disable use of strict SOM,
which is a problem if there's ever a SOM bug.  This is
tricky to do from the client, but easy on the MDT.

The test just verifies that the size stays the same with
strict SOM disabled, because there's no easy way to check
SOM is disabled unless SOM is broken.  (Since it gives the
same value for stat.)

Note this patch requires LU-15609 to be fixed on the client
or the client will see size as 0 when SOM is disabled.

Test-Parameters: testlist=sanity-flr env="ONLY=44e,ONLY_REPEAT=20"
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I338fa7e4dd423b07df0f3c5bad4ec6f02e935fea
Reviewed-on: https://review.whamcloud.com/46683
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15611 osd-zfs: Cleanup while mount failed 78/46678/4
Yang Sheng [Wed, 2 Mar 2022 13:25:59 +0000 (21:25 +0800)]
LU-15611 osd-zfs: Cleanup while mount failed

Need clean up in error out path in osd-zfs.

Signed-off-by: Yang Sheng <ys@whamcloud.com>
Change-Id: I47d9ee9483acb8e1d60c77e8cfc481902a1535ac
Reviewed-on: https://review.whamcloud.com/46678
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Emoly Liu <emoly@whamcloud.com>
Tested-by: Emoly Liu <emoly@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-14067 tests: re-enable gcc compile test for PPC + ARM 09/46409/3
James Simmons [Tue, 31 May 2022 00:06:15 +0000 (20:06 -0400)]
LU-14067 tests: re-enable gcc compile test for PPC + ARM

The development environment earlier was incorrectly setup in the
test bed. With the renewal of the ARM / PPC testbed the
development environment should work so re-enable the gcc test.

Test-Parameters: trivial clientdistro=el8.5 clientarch=aarch64 testlist=sanity env=ONLY=400
Test-Parameters: trivial clientdistro=el8.5 clientarch=ppc64le testlist=sanity env=ONLY=400
Test-Parameters: trivial clientdistro=el8.5 clientarch=aarch64 testlist=sanity-lnet env=ONLY=300
Test-Parameters: trivial clientdistro=el8.5 clientarch=ppc64le testlist=sanity-lnet env=ONLY=300

Change-Id: I95eb8e6f08402209aa350b81cd9517d0f8422632
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/46409
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: xinliang <xinliang.liu@linaro.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15933 libcfs: fix configure check for iov_iter member 01/47601/4
Bobi Jam [Sat, 11 Jun 2022 17:18:18 +0000 (01:18 +0800)]
LU-15933 libcfs: fix configure check for iov_iter member

Kernel commit v5.13-rc1-12-g8cd54c1c8480 changed iov_iter member
->type to ->iter_type, add check at configure to cover this change.

Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I8da26e1f6c6242a3260b458770ec34a65aecaf7d
Reviewed-on: https://review.whamcloud.com/47601
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-12511 test: use proper UAPI header for fsx test app 65/47565/2
James Simmons [Wed, 8 Jun 2022 13:20:38 +0000 (09:20 -0400)]
LU-12511 test: use proper UAPI header for fsx test app

Using uapi as part of the path of the header forces the use of
the OpenSFS tree internal headers instead of an possible
external UAPI headers; which is the case for the native Linux
Lustre client. Just use linux/lustre path for UAPI headers
which works in all cases.

Change-Id: Ia46021f39a8f2e4ecae71846cbb76464617d12ab
Test-Parameters: trivial
Fixes: 90ba8b4ac ("LU-14642 test: add fsx mirror file test mode")
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/47565
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15043 lod: check for spilling loops 83/45083/17
Alex Zhuravlev [Wed, 29 Sep 2021 06:16:01 +0000 (09:16 +0300)]
LU-15043 lod: check for spilling loops

at setting to avoid possible confusion.

Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I901b08f614c162607b1b5c6a992aa5b188fd8e75
Reviewed-on: https://review.whamcloud.com/45083
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15513 lod: iterate initialized stripe 28/47028/7
Bobi Jam [Mon, 11 Apr 2022 08:46:32 +0000 (16:46 +0800)]
LU-15513 lod: iterate initialized stripe

Fix an array out of bounds access.

Do not iterate over the component objects in lod_fill_mirrors() to
check non-rotational OSTs if the component is unintialized or it is
a MDT or RELEASED component.

Fixes: 591a990c61 ("LU-15513 lod: skip uninit component in lod_fill_mirrors")
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Change-Id: I8530cd30fab750c47f15ee9278ec6d68871367cc
Reviewed-on: https://review.whamcloud.com/47028
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15609 flr: Don't assume RDONLY implies SOM 66/46666/5
Patrick Farrell [Mon, 7 Mar 2022 20:29:26 +0000 (15:29 -0500)]
LU-15609 flr: Don't assume RDONLY implies SOM

In lov_io_slice_mirror_init, the client code assumes that
the LCM_FL_RDONLY flag in the layout implies SOM and skips
glimpse if it sees one.  The RDONLY flag means the mirrors
are in sync, which has historically implied SOM is valid.

To start with, using LCM_FL_RDONLY to imply SOM is sort of
a layering violation.  SOM is only communicated from the
MDS when it is valid, and the client already skips glimpse
in that case, so this duplicates functionality from the
higher layers.

More seriously, patch:
"LU-14526 flr: mirror split downgrade SOM"
(https://review.whamcloud.com/43168/)
Made it possible to have LCM_FL_RDONLY but not strict SOM,
so this assumption is no longer correct.

The fix is to not look at LCM_FL_RDONLY when deciding
whether to glimpse a file for size.

Fixes: d87b6f4d1c ("LU-14526 flr: mirror split downgrade SOM")
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I5ed0a2124005bc58c1ed11681c9bd642cffcd1b5
Reviewed-on: https://review.whamcloud.com/46666
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15901 mdc: Remove entry from list before freeing 80/47480/3
Oleg Drokin [Mon, 30 May 2022 07:05:23 +0000 (03:05 -0400)]
LU-15901 mdc: Remove entry from list before freeing

mdc_changelog_cdev_init forgot to remove entries from list if
chardev allocation failed

Change-Id: Ic76b5320bf80c7f7f60c7682bda4bc37a0b300bd
Fixes: d0423abc1ad ("LU-12506 changelog: support large number of MDT")
Signed-off-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47480
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
3 months agoLU-14535 quota: improve quota output format 99/43099/10
Andreas Dilger [Tue, 9 Mar 2021 05:59:42 +0000 (22:59 -0700)]
LU-14535 quota: improve quota output format

Make the output of the quota proc files more readable by removing
needless whitespace that causes it to wrap over a single line.

Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I80fbd42dea865dff1d106724dbf69946d23ebbe5
Reviewed-on: https://review.whamcloud.com/43099
Reviewed-by: Sergey Cheremencev <sergey.cheremencev@hpe.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Hongchao Zhang <hongchao@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-6864 tests: properly skip sanity/245b in interop 56/47656/3
Andreas Dilger [Thu, 16 Jun 2022 19:25:50 +0000 (13:25 -0600)]
LU-6864 tests: properly skip sanity/245b in interop

Skip sanity test_245b if the server does not support multi_mod_rpcs.

Test-Parameters: trivial serverversion=2.14 testlist=sanity env=ONLY=245
Fixes: 23028efcae01 ("LU-6864 osp: manage number of modify RPCs in flight")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ibd73625c64deaa99f6f2a515bc1214cbb83ebbe5
Reviewed-on: https://review.whamcloud.com/47656
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Lai Siyao <lai.siyao@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15795 kernel: RHEL 8.6 server support 92/47192/8
Jian Yu [Sun, 12 Jun 2022 07:37:53 +0000 (00:37 -0700)]
LU-15795 kernel: RHEL 8.6 server support

This patch makes changes to support RHEL 8.6 release
with kernel 4.18.0-372.9.1.el8 for Lustre server.

Test-Parameters: trivial fstype=ldiskfs \
clientdistro=el8.6 serverdistro=el8.6 testlist=sanity

Test-Parameters: trivial fstype=zfs \
clientdistro=el8.6 serverdistro=el8.6 testlist=sanity

Change-Id: I86407171b40d40a05379085444eee79e2ac272b3
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47192
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15795 kernel: new kernel [RHEL 8.6 4.18.0-372.9.1.el8] 80/47180/7
Jian Yu [Sun, 12 Jun 2022 07:14:14 +0000 (00:14 -0700)]
LU-15795 kernel: new kernel [RHEL 8.6 4.18.0-372.9.1.el8]

This patch makes changes to support new RHEL 8.6 release
for Lustre client.

Test-Parameters: trivial clientdistro=el8.6

Change-Id: Id738259ed94104c3a3c7bb5c1b853cfabad49405
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47180
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15918 build: update debhelper compatibility level to 11 50/47550/2
Jian Yu [Tue, 7 Jun 2022 01:38:51 +0000 (18:38 -0700)]
LU-15918 build: update debhelper compatibility level to 11

This patch updates debhelper compatibility level to 11 (which is
currently the recommended level) to resolve the following build
warnings while running "make debs":

Compatibility levels before 10 are deprecated (level 9 in use)

Test-Parameters: trivial clientdistro=ubuntu2004 \
testlist=sanity

Change-Id: Ie5c63f6a3eb29e9aeace1f008d8d492e7587adf2
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47550
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Thomas Stibor <thomas@stibor.net>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15896 gss: ignore OpenSSLv3 deprecated API 85/47485/2
Sebastien Buisson [Mon, 30 May 2022 14:11:50 +0000 (16:11 +0200)]
LU-15896 gss: ignore OpenSSLv3 deprecated API

Lustre GSS code makes use of some OpenSSL API that has been
deprecated in v3, namely all the functions in the DH_* family.
Those would need to be replaced with their EVP_PKEY_* counterparts
but in the meantime we just use the OPENSSL_SUPPRESS_DEPRECATED
define to continue using the deprecated API.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I413a2af1299123b29ed2043188da0348ce9d0a5e
Reviewed-on: https://review.whamcloud.com/47485
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Tested-by: Jian Yu <yujian@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-14104 tests: sanity/123* shouldn't fail performance checks 12/40512/16
Alex Zhuravlev [Mon, 2 Nov 2020 07:13:44 +0000 (10:13 +0300)]
LU-14104 tests: sanity/123* shouldn't fail performance checks

running in VMs as CPU resource isn't strictly guaranteed usually.

Test-Parameters: trivial
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: Ieec4a89b921f7ccc198eb10513d4980ad3a20b51
Reviewed-on: https://review.whamcloud.com/40512
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
3 months agoLU-15908 build: fix debian rules 12/47512/2
Sebastien Buisson [Thu, 2 Jun 2022 10:05:02 +0000 (12:05 +0200)]
LU-15908 build: fix debian rules

A comment in debian/rules file breaks a commands-line continuation,
causing exported env vars to be dropped.

Fixes: a5084c2f2e ("LU-14937 build: re-use config cache in 'make rpms/debs'")
Test-Parameters: trivial
Signed-off-by: Ake Sandgren <ake.sandgren@hpc2n.umu.se>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I0894199301c489b1961e043651c74d7c6c0089d2
Reviewed-on: https://review.whamcloud.com/47512
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15875 kernel: kernel update RHEL7.9 [3.10.0-1160.66.1.el7] 97/47397/2
Jian Yu [Thu, 19 May 2022 18:20:41 +0000 (11:20 -0700)]
LU-15875 kernel: kernel update RHEL7.9 [3.10.0-1160.66.1.el7]

Update RHEL7.9 kernel to 3.10.0-1160.66.1.el7.

Test-Parameters: trivial clientdistro=el7.9 serverdistro=el7.9

Change-Id: I9e8ab33edd6cacbbf895399962027827a1befd5b
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47397
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15865 ptlrpc: don't report eviction for lwp 74/47374/2
Alex Zhuravlev [Tue, 17 May 2022 13:28:38 +0000 (16:28 +0300)]
LU-15865 ptlrpc: don't report eviction for lwp

lwp connections aren't persistent, so they found themselves
"evicted" after target's restart, which is not correct.
don't confuse people with false error.

Test-Parameters: trivial
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: Ia995eac2c4e1323690f42147aedc74f8748eacf0
Reviewed-on: https://review.whamcloud.com/47374
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15854 tests: fix version check for sanity test_64 43/47343/3
Aurelien Degremont [Fri, 13 May 2022 12:42:38 +0000 (12:42 +0000)]
LU-15854 tests: fix version check for sanity test_64

Add missing or proper server version check for interop
testing for sanity test 64i and 64h.

Test-Parameters: trivial testlist=sanity env=ONLY=64
Fixes: 38c78ac ("LU-9704 grant: ignore grant info on read resend")
Fixes: 4894683 ("LU-14124 target: set OBD_MD_FLGRANT in read's reply")
Change-Id: Iec21a407f467db3e9cb197d0a1436ea4e821bef2
Signed-off-by: Aurelien Degremont <degremoa@amazon.com>
Reviewed-on: https://review.whamcloud.com/47343
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
3 months agoLU-15853 tests: sanity 104c should use $MOUNT 42/47342/2
Aurelien Degremont [Fri, 13 May 2022 12:42:38 +0000 (12:42 +0000)]
LU-15853 tests: sanity 104c should use $MOUNT

Replace the hardcoded mount point value in test sanity 104c
with '$MOUNT'.

Test-Parameters: trivial testlist=sanity env=ONLY=104
Fixes: 8ee6e1c ("LU-14565 ofd: Do not rely on tgd_blockbit")
Change-Id: Iead6792115bd92eb53e3da55040694feafcced8d
Signed-off-by: Aurelien Degremont <degremoa@amazon.com>
Reviewed-on: https://review.whamcloud.com/47342
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
3 months agoLU-15851 gnilnd: Remove invalid ASSERT from kgnilnd_send() 20/47320/3
Chris Horn [Wed, 20 Apr 2022 21:45:35 +0000 (16:45 -0500)]
LU-15851 gnilnd: Remove invalid ASSERT from kgnilnd_send()

An LNet user can allocate a large contiguous MD. That MD can have
LNET_MAX_IOV pages which causes some LNDs to assert on either niov
argument passed to lnd_recv() or the value stored in
lnet_msg::msg_niov. This is true even in cases where the actual
transfer size is <= LNET_MTU and will not exceed limits in the
LNDs.

Remove the assert on msg_niov from kgnilnd_send(). kgnilnd will
return an error to upper layer if its unable to set up a buffer for
the send.

Move the ASSERT in kgnilnd_setup_immediate_buffer() so that we only
check niov after accounting for offset.

HPE-bug-id: LUS-10915
Test-Parameters: trivial
Fixes: 857f11169f ("LU-13004 lnet: always put a page list into struct lnet_libmd")
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Ide39f0745686784b1a2402c578bd472196f372b8
Reviewed-on: https://review.whamcloud.com/47320
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15793 kernel: kernel update RHEL8.5 [4.18.0-348.23.1.el8_5] 75/47175/4
Jian Yu [Wed, 18 May 2022 19:40:43 +0000 (12:40 -0700)]
LU-15793 kernel: kernel update RHEL8.5 [4.18.0-348.23.1.el8_5]

Update RHEL8.5 kernel to 4.18.0-348.23.1.el8_5.

Test-Parameters: trivial fstype=ldiskfs \
clientdistro=el8.5 serverdistro=el8.5 testlist=sanity

Test-Parameters: trivial fstype=zfs \
clientdistro=el8.5 serverdistro=el8.5 testlist=sanity

Change-Id: I9724e304c2d32bb0ac2dcf4138438c79d4abca0f
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47175
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15797 build: Workaround _fix_broken_configure_for_lto 68/47168/6
Shaun Tancheff [Sun, 1 May 2022 10:18:28 +0000 (17:18 +0700)]
LU-15797 build: Workaround _fix_broken_configure_for_lto

Workaround _fix_broken_configure_for_lto macro added to
configure macro in RHEL9:

redhat-rpm-config.noarch  190-1.el9.alma  @appstream

Use configure macro directly if it is not parseable

HPE-bug-id: LUS-10918
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I53072c0ffdf82abc938322e9c408cc44f5033ab9
Reviewed-on: https://review.whamcloud.com/47168
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Nathaniel Clark <nclark@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15563 build: Include the new linux/blk-integrity.h 66/47166/3
Shaun Tancheff [Fri, 27 May 2022 15:25:05 +0000 (22:25 +0700)]
LU-15563 build: Include the new linux/blk-integrity.h

Linux v5.15-rc6-17-gfe45e630a103
  block: move integrity handling out of <linux/blkdev.h>

Include the new linux/blk-integrity.h

Since blk-integrity is only used in osd-ldiskfs we can migrate
the compatibility wrappers:
  blk_integrity_interval(),
  blk_integrity_name(),
  bdev_integrity_enabled(),
and
  bip_size()
to osd-ldiskfs/osd_internal.h

HPE-bug-id: LUS-10921
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Idcbef9b43b7d2a740291e3783f81c23454209a25
Reviewed-on: https://review.whamcloud.com/47166
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15796 build: require python2 for lustre-iokit deb 64/47164/2
Jian Yu [Thu, 28 Apr 2022 05:00:02 +0000 (22:00 -0700)]
LU-15796 build: require python2 for lustre-iokit deb

Package python is not available on Ubuntu 22.04.
We can just require python2 in the control files.

Test-Parameters: trivial clientdistro=ubuntu2004 \
testlist=obdfilter-survey

Change-Id: Id37c9babba31c575855238592cbac4ce5c9ee79a
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47164
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Thomas Stibor <thomas@stibor.net>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-12514 LNet: get entropy from nid when nid set. 59/47159/2
Mr. NeilBrown [Wed, 27 Apr 2022 18:33:57 +0000 (14:33 -0400)]
LU-12514 LNet: get entropy from nid when nid set.

When the 'lustre' module is loaded, it gets a list of
net devices and uses the node ids to  add entropy
to the prng.  This means that the network interfaces need
to be configured before the module is loaded, which prevents
the module from being compiled into a monolithic kernel.

So move this entropy addition to the moment when
the interface is imported to LNet and the node id is first known.

Linux-commit: 9f0e4c2b823b0cf5744a448d3b23cd618b86db41

Change-Id: I1c9b4f9a5c01de5b14188ccd9330b51eeafd43ac
Signed-off-by: Mr. NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-on: https://review.whamcloud.com/47159
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15789 tests: execute cleanup_115() 1 time 53/47153/4
Elena Gryaznova [Wed, 27 Apr 2022 12:26:26 +0000 (15:26 +0300)]
LU-15789 tests: execute cleanup_115() 1 time

Patch fixes the following test_115() defects:
cleanup_115 () is called 3 times:
  1. at the end of test
  2. on run_one() returns
  3. on run_one() subshell exits

No reason to use $SINGLEMDS since test operates with mds1
only.
No reason to save FLAKEY since test is executed in subshell.
Correctly call DEBUGFS -c -R 'stat ROOT/$tdir/$tfile',
without correct quotation we have:
    debugfs 1.45.6.cr1 (14-Aug-2020)
    debugfs: No such file or directory while trying to open
      ROOT/d115.conf-sanity/f115.conf-sanity
      stat: Filesystem not open

Fixes: ef13d5464e ("LU-11915 tests: fix conf-sanity 115 test")
Fixes: d7449233c1 ("LU-8444 tests: test for unsigned xattr inode number")
Test-Parameters: trivial testlist=conf-sanity env=ONLY="115 116"
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-10901
Reviewed-by: Vladimir Saveliev <vlaidimir.saveliev@hpe.com>
Change-Id: I11c4889ebe309c48527235c59fce1381202401b4
Reviewed-on: https://review.whamcloud.com/47153
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15785 tests: do not detect versions for RPC_MODE mode 44/47144/2
Elena Gryaznova [Tue, 26 Apr 2022 13:37:27 +0000 (16:37 +0300)]
LU-15785 tests: do not detect versions for RPC_MODE mode

lustre_version_code() is called each time when do_rpc_nodes()
is called. It is not needed to detect versions for RPC_MODE mode.

Fixes: 8fa23490bb ("LU-1538 tests: standardize test script init - sanity")
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-10914
Change-Id: Ia7645de0a4eedfddf859c80e661ebcb2e45de140
Reviewed-on: https://review.whamcloud.com/47144
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
3 months agoLU-15773 kernel: kernel update SLES12 SP5 [4.12.14-122.116.1] 15/47115/4
Jian Yu [Fri, 13 May 2022 01:16:04 +0000 (18:16 -0700)]
LU-15773 kernel: kernel update SLES12 SP5 [4.12.14-122.116.1]

Update SLES12 SP5 kernel to 4.12.14-122.116.1 for Lustre client.

Test-Parameters: trivial clientdistro=sles12sp5 \
env=SANITY_EXCEPT="56oc 430c 817" testlist=sanity

Change-Id: I66d2ef62e009b56502724f8c299e5d4dea4fa766
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47115
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Yang Sheng <ys@whamcloud.com>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-930 iokit: remove obsolete obdsurvey reference 02/47102/2
Andreas Dilger [Wed, 20 Apr 2022 23:38:21 +0000 (17:38 -0600)]
LU-930 iokit: remove obsolete obdsurvey reference

Remove reference to long obsolete "obdsurvey" tool from README.

Fixes: c8521aa1599c ("Removed per Peter Bojanic...")
Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: Ic95e0544b725ff9a83e8865d9913af51336b4655
Reviewed-on: https://review.whamcloud.com/47102
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Reviewed-by: cliff white <cwhite@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15766 doc: Improve lfs-hsm.1 to match options in lfs.c 99/47099/3
Thomas Stibor [Wed, 20 Apr 2022 11:52:47 +0000 (13:52 +0200)]
LU-15766 doc: Improve lfs-hsm.1 to match options in lfs.c

Manual page lfs-hsm.1 has minor inconsistent formatting
issues such as:

lfs hsm_state <FILE>...
lfs hsm_action file

and missing optional argument [--archive-id NUM]. According
to lfs.c the options shall be, e.g:

{"hsm_set", lfs_hsm_set, 0, "Set HSM user flag on specified files.n"
 "usage: hsm_set [--norelease] [--noarchive] [--dirty] [--exists] "
 "[--archived] [--lost] [--archive-id NUM] <file> ..."}

This patch ensures that manual page and options
in lfs.c are in match and consistent.

Change-Id: I745958f842d74e2627ae232197cc0143c368048d
Test-Parameters: trivial
Signed-off-by: Thomas Stibor <t.stibor@gsi.de>
Reviewed-on: https://review.whamcloud.com/47099
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Etienne AUJAMES <eaujames@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15758 build: Client module DEB can't be installed on Debian 87/47087/4
Thomas Stibor [Tue, 19 Apr 2022 12:31:09 +0000 (14:31 +0200)]
LU-15758 build: Client module DEB can't be installed on Debian

Building DEB package lustre-client-modules-*.deb depends
since commit 32c4b80192652f55bcef5786e4ec683e85234c04 on
package linux-generic. This package is however available
on Ubuntu distributions, but not e.g. on Debian distribution.
As a consequence the built package lustre-client-modules-*.deb
cannot be installed on Debian due to non-existing package
dependency.

Test-Parameters: trivial clientdistro=ubuntu2004
Signed-off-by: Thomas Stibor <t.stibor@gsi.de>
Change-Id: Ia541aaede7d779c4dd2f81f896a6be8a797780b3
Reviewed-on: https://review.whamcloud.com/47087
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-13485 build: remove parallel configure dir 77/47077/2
Jian Yu [Fri, 15 Apr 2022 03:07:05 +0000 (20:07 -0700)]
LU-13485 build: remove parallel configure dir

This patch removes the temporary directory for
parallel configure tests at the end of configure
to avoid checking the already generated modules
while configuring the same Lustre codes with
a different kernel.

Change-Id: I4505fb932954531d262b5380f17b3df75a80bfa0
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/47077
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Minh Diep <mdiep@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15308 lod: set ldo_mirrors to NULL on error 08/47008/2
John L. Hammond [Wed, 6 Apr 2022 16:51:47 +0000 (11:51 -0500)]
LU-15308 lod: set ldo_mirrors to NULL on error

In lod_alloc_comp_entries() if OBD_ALLOC_LARGE fails and we free
ldo_mirrors then we set it to NULL to avoid a double free later.

Test-Parameters: trivial
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I27552d1eaecc06720190db9cfe89ded71b9fef53
Reviewed-on: https://review.whamcloud.com/47008
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
3 months agoLU-15709 tests: t-f stopall() defect: num not initialized 57/46957/2
Elena Gryaznova [Wed, 30 Mar 2022 18:22:32 +0000 (21:22 +0300)]
LU-15709 tests: t-f stopall() defect: num not initialized

The following test demonstrates the defect (OSTCOUNT=2):
  test_0A () {
        local num=100
        echo $num
        stopall
        echo $num after stopall
  }
Result:
  == sanity test 0A: num ===
  100
  Stopping clients: fre0107,fre0108 /mnt/lustre (opts:)
  ...
  2 after stopall

Fixes: d2d56f38da (" - make HEAD from b_post_cmd3")
Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-10864
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@hpe.com>
Change-Id: I46648c741943f219c03f3501585051e285365578
Reviewed-on: https://review.whamcloud.com/46957
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15699 build: without mpi build fails 38/46938/2
Shaun Tancheff [Sun, 27 Mar 2022 11:14:24 +0000 (07:14 -0400)]
LU-15699 build: without mpi build fails

RPM build must honor the --without mpi and should ensure
that packaging does not fail.

Also where multiple mpi flavors are installed only the
desired mpi_name should be loaded / unloaded

Test-Parameters: trivial
HPE-bug-id: LUS-8718
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I2367597c715f68166275a689fe62634bf8a0607f
Reviewed-on: https://review.whamcloud.com/46938
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15689 libcfs: libcfs_debug_mb set incorrectly on init 25/46925/2
Chris Horn [Wed, 23 Mar 2022 06:21:06 +0000 (01:21 -0500)]
LU-15689 libcfs: libcfs_debug_mb set incorrectly on init

If libcfs_debug_mb parameter is specified to insmod (i.e. set before
module is initialized) then it does not get initialized correctly.

libcfs_param_debug_mb_set() expects cfs_trace_get_debug_mb() to return
zero if the module has not been initialized yet, but
cfs_trace_get_debug_mb() will return 1 in this case. Modify
cfs_trace_get_debug_mb() to return zero as expected. A related issue
is that in this case we need to call cfs_trace_get_debug_mb() after
cfs_tracefile_init() so that libcfs_debug_mb gets the same value it
would get if we had set it after module init.

When libcfs_debug_mb is specified to insmod, libcfs_debug_init()
divides its value by num_possible_cpus(), but this is already done in
libcfs_param_debug_mb_set().

Test-Parameters: trivial
Fixes: 8b78a3ffb5 ("LU-9859 libcfs: always range-check libcfs_debug_mb setting.")
HPE-bug-id: LUS-10839
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I1003758156acb5cf6ea30bbdfd7b45a743a2a5aa
Reviewed-on: https://review.whamcloud.com/46925
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15674 tests: skip cifs tests for mlnx 5.4 93/46893/3
Elena Gryaznova [Tue, 22 Mar 2022 15:34:14 +0000 (18:34 +0300)]
LU-15674 tests: skip cifs tests for mlnx 5.4

OFED installation caused CIFS to break in RHEL8.4 Release: 5.4
https://docs.nvidia.com/networking/display/MLNXENv543100/Known+Issues

Test-Parameters: trivial
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-10825
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: Id2d0e98fbfa1a24460fc6eb229da1ba6e659ad38
Reviewed-on: https://review.whamcloud.com/46893
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15672 tests: fix typo in facet_failover_host() 92/46892/2
Elena Gryaznova [Tue, 22 Mar 2022 14:41:08 +0000 (17:41 +0300)]
LU-15672 tests: fix typo in facet_failover_host()

mgsfailover_HOST is to be equal to mds1failover_HOST if mds and
mgs are combined and mds1failover_HOST is not empty.

Fixes: 36475ba5fc ("LU-9272 tests: fix for facet_failover mgs")
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
HPE-bug-id: LUS-10746
Reviewed-by: Alexander Boyko <alexander.boyko@hpe.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Change-Id: Iadd27e977d95794a53149a99380296329469452c
Reviewed-on: https://review.whamcloud.com/46892
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15655 contrib: update branch_comm to python3 56/46856/3
John L. Hammond [Thu, 17 Mar 2022 13:55:32 +0000 (08:55 -0500)]
LU-15655 contrib: update branch_comm to python3

Update the branch_comm script from to python2 to python3.

Test-Parameters: trivial
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: Icbb747c01e15cbe77c6dd6df3e913654ded84239
Reviewed-on: https://review.whamcloud.com/46856
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15626 tests: Fix "error" reported by shellcheck(2) 14/46814/3
Arshad Hussain [Wed, 16 Mar 2022 07:23:13 +0000 (12:53 +0530)]
LU-15626 tests: Fix "error" reported by shellcheck(2)

This patch fixes "error" issues reported by shellcheck
for *.sh files. This patch also moves spaces to tabs.

Test-Parameters: trivial
Test-Parameters: testlist=sanity-scrub,sanity-dom
Test-Parameters: testlist=large-scale
Test-Parameters: testlist=lnet-selftest
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: I4d129f26493bc17ee6d5988ae234dace149dfdd3
Reviewed-on: https://review.whamcloud.com/46814
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15647 utils: 'lfs df' shouldn't loop forever 13/46813/2
Andreas Dilger [Sun, 13 Mar 2022 02:35:45 +0000 (19:35 -0700)]
LU-15647 utils: 'lfs df' shouldn't loop forever

Don't loop forever in "lfs df" if there is a problem fetching
the target statfs information from the kernel and -ENODEV is
not returned for whatever reason.

Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I5110c7246cf53eb5c4d59424a44b73b9d23ebbe5
Reviewed-on: https://review.whamcloud.com/46813
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15484 tests: Increase timeout to wait for child 64/46764/4
Patrick Farrell [Wed, 9 Mar 2022 15:15:22 +0000 (10:15 -0500)]
LU-15484 tests: Increase timeout to wait for child

Sanity-pcc 101a is failing because the remote 'sleep 600'
process is not always started in time, meaning the NS
doesn't exist.

Increase the wait time for this process to start.

Fixes: f3be560031 "LU-15170 llite: Switch pcc to lookup_one_len"

Test-Parameters: trivial
Test-Parameters: testlist=sanity-pcc env="ONLY=101a,ONLY_REPEAT=50"
Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I57175ec2f0e948045cf88d4a13a1e56cc34f8407
Reviewed-on: https://review.whamcloud.com/46764
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
3 months agoLU-15632 tests: Typo in check_node_health 46/46746/3
Chris Horn [Tue, 8 Mar 2022 02:59:05 +0000 (20:59 -0600)]
LU-15632 tests: Typo in check_node_health

A typo in test-frameworks.sh::check_node_health() causes test failures
if "lctl get_param catastrophe" doesn't return any output.

Test-Parameters: trivial
Fixes: 67752f6db2 ("LU-14773 tests: skip check_network() on working node")
HPE-bug-id: LUS-10800
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I5dbb46578a62f8fc13f39be6fbebe87c75bc2a7d
Reviewed-on: https://review.whamcloud.com/46746
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Elena Gryaznova <elena.gryaznova@hpe.com>
3 months agoLU-15636 test: add iabf 44/46744/7
John L. Hammond [Wed, 16 Mar 2022 17:00:36 +0000 (01:00 +0800)]
LU-15636 test: add iabf

Usage: [IABF_OPTIONS...] iabf [INIT] --- A --- B --- [FINI] ---

Initialize, run tasks A and B with various overlaps, and Finalize.

Command lines for INIT, A, B, and FINI are terminated by ---.
If INIT or FINI is empty then it will be skipped.
If INIT or FINI fail then we exit immediately with status 1.

For delay = $IABF_DELAY_BEGIN_NS; delay < $IABF_DELAY_END_NS;
delay += $IABF_DELAY_STEP_NS
  Run initializer (INIT).
  In parallel: Fork, delay *, and exec processes A and B.
    If delay is negative then delay A by abs(delay) ns.
    Otherwise delay B by delay ns.
  Wait for A and B to terminate.
  Run finilizer (FINI).

See lustre/tests/iabf/README for more information.

Test-Parameters: trivial
Change-Id: I97920e082a7a5bec458c805c507b4fefb448427b
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Signed-off-by: Bobi Jam <bobijam@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/46744
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-10994 lov: remove lov_page 21/47221/6
John L. Hammond [Thu, 5 May 2022 16:14:55 +0000 (11:14 -0500)]
LU-10994 lov: remove lov_page

Remove the lov page layer since it does nothing but costs 24 bytes per
page plus pointer chases.

Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: Icd7b4b0041e0fe414a3a4143179f45845177960e
Reviewed-on: https://review.whamcloud.com/47221
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Bobi Jam <bobijam@hotmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15618 lnet: Return ESHUTDOWN in lnet_parse() 11/46711/2
Chris Horn [Thu, 3 Mar 2022 07:12:32 +0000 (01:12 -0600)]
LU-15618 lnet: Return ESHUTDOWN in lnet_parse()

If the peer NI lookup in lnet_parse() fails with ESHUTDOWN then we
should return that value back to the LNDs so that they can treat the
failed call the same way as other lnet_parse() failures.

Returning zero results in at least one bug in socklnd where a
reference on a ksock_conn can be leaked which prevents socklnd from
shutting down.

Fixes: 47b7b31978 ("LU-8106 lnet: Do not drop message when shutting down LNet")
Test-Parameters: trivial testlist=sanity-lnet
HPE-bug-id: LUS-15794
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: Ic403619c6dccf3921c46a674808c404adad7a30e
Reviewed-on: https://review.whamcloud.com/46711
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15617 contrib: Add shellcheck to prepare-commit-msg 05/46705/6
Arshad Hussain [Fri, 4 Mar 2022 06:41:06 +0000 (12:11 +0530)]
LU-15617 contrib: Add shellcheck to prepare-commit-msg

Add shellcheck verifiction to prepare-commit-msg.
SHELLCHECK_OPT export can be used to further add
option if the user wants. 'shellcheck' by deault
is set to 'yes' (SHELLCHECK_RUN="yes"). However,
it can be switched off by setting SHELLCHECK_RUN=
Tested on shellcheck version 0.8.0

Test-Parameters: trivial
Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Change-Id: Id0603b26202b92f68d43b82a3b2d846dd634c20e
Reviewed-on: https://review.whamcloud.com/46705
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
3 months agoLU-15598 tgt: free allocated page on error 59/46659/2
Andreas Dilger [Tue, 1 Mar 2022 04:49:53 +0000 (21:49 -0700)]
LU-15598 tgt: free allocated page on error

Free allocated page if cfs_crypto_hash_init() fails.

Fixes: b1e7be00cb6e ("LU-10472 osc: add T10PI support for RPC checksum")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I0a45a82a57a98ad2517ccf50a2be1e8d65550bb5
Reviewed-on: https://review.whamcloud.com/46659
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
3 months agoLU-15596 build: set TARBALL with m-a build helper for debs 39/46639/12
Shaun Tancheff [Fri, 25 Mar 2022 18:31:06 +0000 (13:31 -0500)]
LU-15596 build: set TARBALL with m-a build helper for debs

debs built using module-assistant tool by default scan
for packages and may find a random lustre tarball

Specify the correct tarball with the TARBALL
environment variable to avoid default search picking an
incorrect tarball source.

HPE-bug-id: LUS-10783
Test-Parameters: trivial
Fixes: 1d97ac16d8 ("LU-14948 build: Warn about /usr/src/lustre.tar.bz2")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Iaa5a31aaa81e11ee97ae2ea27811c7a4399a0efa
Reviewed-on: https://review.whamcloud.com/46639
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15573 build: remove mpi, CC deps from config cache 62/46562/2
Shaun Tancheff [Sun, 20 Feb 2022 17:49:39 +0000 (12:49 -0500)]
LU-15573 build: remove mpi, CC deps from config cache

Also drop mpi and CC dependencies compiler type from the
initial values in the configure cache as these may be
changed during the setup in the rpm spec or debian build rules

Test-Parameters: trivial
Fixes: a5084c2f2e ("LU-14937 build: re-use config cache in 'make rpms/debs'")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I986c2ae3653deae08b9da8d64d0b3c02fdc8fa2b
Reviewed-on: https://review.whamcloud.com/46562
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-9243 gss: fix GSS struct definition badness 43/46543/6
Sebastien Buisson [Thu, 17 Feb 2022 15:40:20 +0000 (16:40 +0100)]
LU-9243 gss: fix GSS struct definition badness

struct lgssd_ioctl_param should not be defined in multiple places. So
move it to a new header file lgss.h that can be included from kernel
space and user space.

struct gss_header, struct gss_rep_header, struct gss_err_header and
struct gss_wire_ctx are going on the wire, so they need to be moved to
lustre_idl.h, and be wire-checked.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I97c4a8322e6bb7627c6dff5f068931278f4567d7
Reviewed-on: https://review.whamcloud.com/46543
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: John L. Hammond <jhammond@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-14875 import: fix bad CPT read 41/46541/2
Cyril Bordage [Thu, 17 Feb 2022 11:49:16 +0000 (12:49 +0100)]
LU-14875 import: fix bad CPT read

When importing, CPT was read from tunables field but in fact, it is in
the same level in the YAML file generated during export.

Test-parameters: trivial testlist=sanity-lnet

Signed-off-by: Cyril Bordage <cbordage@whamcloud.com>
Change-Id: Iea7b6189ad1a25b95ae6416d75ee2cbe4dca2fbf
Reviewed-on: https://review.whamcloud.com/46541
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Chris Horn <chris.horn@hpe.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15559 tests: add do_node_vp() and do_facet_vp() 35/46535/4
John L. Hammond [Wed, 16 Feb 2022 17:54:26 +0000 (11:54 -0600)]
LU-15559 tests: add do_node_vp() and do_facet_vp()

Add new test-framework functions (do_node_vp() and do_facet_vp())
which carefully escape and quote command lines for execution on the
local or remote node. Add sanityn test_0 to verify.

Test-Parameters: trivial env=ONLY="0" testlist=sanityn
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: Ic491b0148e6ef11ecd0b3ccce983afcf4d1300e5
Reviewed-on: https://review.whamcloud.com/46535
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15635 ldiskfs: Interface change fix server v5.10 75/46775/6
Shaun Tancheff [Fri, 11 Mar 2022 17:14:39 +0000 (00:14 +0700)]
LU-15635 ldiskfs: Interface change fix server v5.10

Linux v5.9-rc7-8-g15ed2851b0f4
    ext4: remove unused argument from ext4_(inc|dec)_count

Test for ext4_inc_count with 2 arguments and provide a compat
wrapper for ldiskfs_inc|dec_count that discards handle has
needed.

HPE-bug-id: LUS-10808
Fixes: c93a3e5b15 ("LU-14195 ldiskfs: update patches for Linux 5.10")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I48fb52e67ad334e2fc0c045e96fc5dffd3243842
Reviewed-on: https://review.whamcloud.com/46775
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15538 lnet: DLC sets map_on_demand incorrectly 92/46492/2
Chris Horn [Sat, 5 Feb 2022 23:15:30 +0000 (23:15 +0000)]
LU-15538 lnet: DLC sets map_on_demand incorrectly

When any NET or LND tunable is specified via CLI or yaml, then the
whole tunables struct gets memset to 0, or in the case of yaml config,
0 gets assigned to any tunable that isn't specified in the yaml. This
causes a problem for map_on_demand because 0 is a valid value for that
parameter, and ko2iblnd cannot know whether the user specified that 0
should be used or if DLC is specifying that the parameter was unset.

Rather than setting this parameter to 0 in the LND tunables struct,
have DLC set it to UINT_MAX to indicate that ko2iblnd should use the
value of the kernel module parameter.

Test-Parameters: trivial
HPE-bug-id: LUS-10740
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I303e64d4d402ba61b5ae3e3910873f192a4a2845
Reviewed-on: https://review.whamcloud.com/46492
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15521 spec: fix bare words error with rpm 4.16 71/46471/3
Jian Yu [Mon, 7 Feb 2022 18:21:47 +0000 (10:21 -0800)]
LU-15521 spec: fix bare words error with rpm 4.16

RPM 4.16 removed support for bare words in expressions
(eg a == b needs to be "a" == "b" now). The change is
backward compatible. More changes are in:
https://rpm.org/wiki/Releases/4.16.0

This patch accommodates the above change and fixes more
errors/warnings:
- E: specfile-error error: bare words are no longer supported,
     please use "...":  redhat=="redhat" || redhat=="fedora"
- E: specfile-error warning: extra tokens at the end of %else
     directive in line 140:  %else #for Suse
- W: macro-in-comment %optflags
- W: macro-in-comment %{name}

Test-Parameters: trivial

Change-Id: I725c47f62be7762a89e5919fd2865e2fb2ced407
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/46471
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Nathaniel Clark <nclark@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15522 util: make readline() static 65/46465/2
John L. Hammond [Sun, 6 Feb 2022 17:45:02 +0000 (11:45 -0600)]
LU-15522 util: make readline() static

In libcfs/libcfs/util/parser.c make readline() static to avoid
conflicting with the real readline().

Test-Parameters: trivial
Signed-off-by: John L. Hammond <jhammond@whamcloud.com>
Change-Id: I4b90fd5d22c9fd5d193f5d18588afd3d97ca591c
Reviewed-on: https://review.whamcloud.com/46465
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Mike Pershin <mpershin@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15508 gss: protect from arbitrary write to init channel 61/46461/2
Sebastien Buisson [Fri, 4 Feb 2022 14:53:35 +0000 (15:53 +0100)]
LU-15508 gss: protect from arbitrary write to init channel

In case some arbitrary data was written to the gss init channel,
directly return -EINVAL. This protects against unsolicited
authentication requests, and avoids having a dandling entry
in the auth init cache.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: Iadde630012e4ded83f9609fbb3e10b2e092deb57
Reviewed-on: https://review.whamcloud.com/46461
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Jeremy Filizetti <jeremy.filizetti@gmail.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15509 lnet: Ping buffer ref leak in lnet_peer_data_present 31/46431/2
Chris Horn [Wed, 2 Feb 2022 22:05:15 +0000 (22:05 +0000)]
LU-15509 lnet: Ping buffer ref leak in lnet_peer_data_present

lnet_peer_merge_data() and lnet_peer_set_primary_data() are
responsible for dropping the reference on the ping buffer that is
taken by lnet_peer_push_event() and lnet_discovery_event_reply().
However, there are some error paths in lnet_peer_data_present()
where we do not call either lnet_peer_merge_data() or
lnet_peer_set_primary_data(). In these cases, we need to drop
the reference on the ping buffer otherwise it will leak.

HPE-bug-id: LUS-10715
Test-Parameters: trivial testlist=sanity-lnet
Signed-off-by: Chris Horn <chris.horn@hpe.com>
Change-Id: I36ba0017caa9d6ce139f94090912496f14eda626
Reviewed-on: https://review.whamcloud.com/46431
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Serguei Smirnov <ssmirnov@whamcloud.com>
Reviewed-by: Cyril Bordage <cbordage@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15511 misc: allow Lustre-change and Lustre-commit 20/46420/3
Andreas Dilger [Wed, 2 Feb 2022 02:34:34 +0000 (19:34 -0700)]
LU-15511 misc: allow Lustre-change and Lustre-commit

Allow the Lustre-change:, Lustre-commit:, Linux-commit: labels in
the signoff section.  Verify that Lustre-change: has a valid-looking
Gerrit URL in "permalink" format "https://review.whamcloud.com/nnnnn".
Verify -commit: labels have a valid-looking Git hashes (40 hex chars),
though the actual hash cannot be verified because it may be from a
different Git repository.

Shorten the help message in case of error, and add "commit-msg --help"
to print the full commit format help.

Allow lines over 70 chars that contain URLs, which cannot be shorter.

Test-Parameters: trivial
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I866ab91b33f6e52ff893344df74af243903ebbe5
Reviewed-on: https://review.whamcloud.com/46420
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alena Nikitenko <anikitenko@ddn.com>
Reviewed-by: James Nunez <jnunez@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15393 lod: skip qos for qos_threshold_rr=100 88/46388/3
Alexander Boyko [Mon, 31 Jan 2022 14:04:08 +0000 (09:04 -0500)]
LU-15393 lod: skip qos for qos_threshold_rr=100

Current implementation of qos allocation is called for
every statfs update. It takes lq_rw_sem for write and
recalculate penalties, even whith setting qos_threshold_rr=100.
Which means always use rr allocation. Let's skip unnecessary
locking and calculation for 100% round robin allocation.

HPE-bug-id: LUS-10388
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I2fcc272d00a988ca4ba0f745b1d5809d65b28654
Reviewed-on: https://review.whamcloud.com/46388
Reviewed-by: Andrew Perepechko <andrew.perepechko@hpe.com>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15493 tests: facet_failover() improvements 59/46359/10
Elena Gryaznova [Mon, 7 Feb 2022 14:14:25 +0000 (17:14 +0300)]
LU-15493 tests: facet_failover() improvements

Fix template matching in affected facets accounting
(when the == and != operators are used, the string to the
right of the operator is considered a pattern).

Reduce failover duration done by facet_failover(): long
failover duration needs increasing of ldlm_enqueue_min to
avoid evictions with striped objects, so let's do node reboot
and mount on failover node in parallel.

Make wait_clients_import_state() working with a facet list.

Test-Parameters: env=CONF_SANITY_EXCEPT=32a
Signed-off-by: Elena Gryaznova <elena.gryaznova@hpe.com>
Signed-off-by: Alexander Zarochentsev <alexander.zarochentsev@hpe.com>
Signed-off-by: Andriy Skulysh <andriy.skulysh@hpe.com>
HPE-bug-id: LUS-7112, LUS-9901, LUS-10718
Change-Id: Ibbeeea49632acce590219da53f322afb44fa4ffa
Reviewed-on: https://review.whamcloud.com/46359
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15492 build: fallthrough macro for pre/post gcc-7 57/46357/4
Shaun Tancheff [Fri, 28 Jan 2022 07:56:33 +0000 (01:56 -0600)]
LU-15492 build: fallthrough macro for pre/post gcc-7

gcc-7.5 on openSUSE 15:
   error: this statement may fall through [-Werror=implicit-fallthrough=]

Use the __attribute__((fallthrough)) for gcc-7 and later.
and use a no op statement for earlier gcc where the fallthrough
attribute is not available.

Test-Parameters: trivial
Fixes: 5549b1b9e0 ("LU-15220 lustre: use 'fallthrough' pseudo keyword for switch")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Ib72f5996149c738805f15e354e1e1606d981ce29
Reviewed-on: https://review.whamcloud.com/46357
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Patrick Farrell <pfarrell@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-13906 build: Fix %{name}-osd-ldiskfs-mount 41/46341/3
Shaun Tancheff [Fri, 28 Jan 2022 08:15:00 +0000 (15:15 +0700)]
LU-13906 build: Fix %{name}-osd-ldiskfs-mount

The following error occurs during installation:

error: Failed dependencies:
    lustre-osd-ldiskfs-mount = 2.14.57_56_g4d94d2f is needed by
    kmod-lustre_ib-osd-ldiskfs-2.14.57_56_g4d94d2f-1.el8.x86_64

Test-Parameters: trivial
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Idbcdbd5a1e7793c1359f90c1035ded9fe8e90576
Reviewed-on: https://review.whamcloud.com/46341
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-13906 build: Enable using ldiskfsprogs without wc tag 40/46340/5
Shaun Tancheff [Tue, 1 Feb 2022 16:14:43 +0000 (10:14 -0600)]
LU-13906 build: Enable using ldiskfsprogs without wc tag

HPE ldiskfsprogs internal versioning is tagged with 'cr',
Whamcloud ldiskfsprogs internal version is tagged with 'wc'.

Instead depend on an ldiskfsprogs > 1.45.6

Test-Parameters: trivial
HPE-bug-id: LUS-10712
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: Ic1c6037aaf4d9877ee9a3cf54c9285dd36abf64d
Reviewed-on: https://review.whamcloud.com/46340
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15420 uapi: avoid gcc-11 -Werror=stringop-overread 19/46319/4
James Simmons [Sat, 5 Feb 2022 16:34:22 +0000 (09:34 -0700)]
LU-15420 uapi: avoid gcc-11 -Werror=stringop-overread

GCC 11 warns about string and memory operations on fixed address:

In function ‘strlen’,
    inlined from ‘changelog_rec_sname’ at include/uapi/linux/lustre/lustre_user.h:1981:19,
    inlined from ‘mdd_changelog_rec_ext_rename’ at lustre/mdd/mdd_dir.c:932:2,
    inlined from ‘mdd_changelog_ns_store’ at lustre/mdd/mdd_dir.c:1061:3:
include/linux/fortify-string.h:25:33: error: ‘__builtin_strlen’
reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
   25 | #define __underlying_strlen     __builtin_strlen

The reason is that we are looking for an address right after the end
of the chanelog record header which gcc thinks is an overrun. Rework
the code to allow us to index the memory right after the changelog
record header.

Also fix a long hidden bug in the lustre snmp code.

Change-Id: I13479b9074a392330d39f01656b26f9e9a91a8ec
Signed-off-by: James Simmons <jsimmons@infradead.org>
Reviewed-on: https://review.whamcloud.com/46319
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
3 months agoLU-15480 build: style cleanup lustre/tests/aiocp.c 97/46297/6
Shaun Tancheff [Wed, 16 Feb 2022 09:19:00 +0000 (03:19 -0600)]
LU-15480 build: style cleanup lustre/tests/aiocp.c

Add implicit-fallthrough decorator
Also some minor style-cleanups

Test-Parameters: trivial
HPE-bug-id: LUS-10201
Fixes: 689714eb51 ("LU-13846 llite: move iov iter forward by ourself")
Signed-off-by: Shaun Tancheff <shaun.tancheff@hpe.com>
Change-Id: I3be3b27c1c006d13820ea55a84c083fbfc8c4b0f
Reviewed-on: https://review.whamcloud.com/46297
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Petros Koutoupis <petros.koutoupis@hpe.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15474 test: facet_failover() should mount all facets concurrently 66/46266/2
Andriy Skulysh [Fri, 24 Jul 2020 09:07:27 +0000 (12:07 +0300)]
LU-15474 test: facet_failover() should mount all facets concurrently

A single host can hold multiple facets.
They all are needed to be mounted after reboot.
Mounting all facets for in one by one mode increases
total recovery time and leads to evictions
while using striped files.

Change-Id: Ifa76dfd080cd89f1316ccb1d5552bb12d070168a
HPE-bug-id: LUS-9141
Reviewed-by: Vladimir Saveliev <c17830@cray.com>
Reviewed-by: Alexander Zarochentsev <c17826@cray.com>
Signed-off-by: Andriy Skulysh <andriy.skulysh@hpe.com>
Reviewed-on: https://review.whamcloud.com/46266
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Elena Gryaznova <elena.gryaznova@hpe.com>
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@hpe.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-9859 libcfs: add "default" keyword for debug mask 51/46251/3
Andreas Dilger [Fri, 21 Jan 2022 07:20:56 +0000 (00:20 -0700)]
LU-9859 libcfs: add "default" keyword for debug mask

Allow "lctl set_param debug=default" to reset the debug mask to
the default value.  This is useful if the debug needs to be set
to a higher value temporarily, but should be easily reset back
to the original value afterward.

Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Change-Id: I7d0d8fb81e51afb5ea6f29abea0d0814de3ebbe5
Reviewed-on: https://review.whamcloud.com/46251
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15420 llite: add rcu argument to ->get_acl() callback 86/46086/5
Jian Yu [Tue, 25 Jan 2022 05:51:02 +0000 (21:51 -0800)]
LU-15420 llite: add rcu argument to ->get_acl() callback

Kernel 5.15 commit 0cad6246621b5887d5b33fea84219d2a71f2f99a
added a rcu argument to the ->get_acl() callback.

Test-Parameters: trivial
Change-Id: Icd711b38dda1a5a3c56bd631fa2edd94eab3572c
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/46086
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15412 tests: Let init_clients_lists() export client vars 94/45994/7
Xinliang Liu [Fri, 7 Jan 2022 02:41:00 +0000 (02:41 +0000)]
LU-15412 tests: Let init_clients_lists() export client vars

init_clients_lists() counts the value of client related variables
correctly. So let it define and export these variables.

This patch can fix sanity test 807 stuck issue when running on
multi-node Lustre cluster and CLIENTS is empty.

Also cleanup client count checking. Now CLIENTS is always set.

Change-Id: I9a5d4b9bde401e14e1d7f6f88b04c8d1c6aea11a
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Reviewed-on: https://review.whamcloud.com/45994
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15393 lod: use killable semaphore for creation path 21/45921/7
Alexander Boyko [Wed, 22 Dec 2021 12:06:16 +0000 (07:06 -0500)]
LU-15393 lod: use killable semaphore for creation path

lod_ost_alloc_qos() function sleeps during ost failover, but object
allocation could use different OSTs. The patch changes
down_write call to down_write_killable and adds timer for a
wakeup.

The main idea of this fix is next, when OST is lost during
lod_ost_alloc_rr() and MDT does not have precreated objects for it
lod_ost_alloc_rr()->..->lod_qos_declare_object_on() would sleep while
holding a lq_rw_sem for read. Any creation thread would stuck at
lod_ost_alloc_qos() waiting lq_rw_sem for write, after statfs update.
Whith a fix sleep is limited and allocation would going through
lod_ost_alloc_rr(). For read lq_rw_sem is shared and stripe allocation
would skip OST without objects.

lod_ost_alloc_rr() refills OST pool with a lq_rw_sem for write, when
lq_rr.lqr_flags has LQ_DIRTY. This should happen only when OST is
added/removed. No need to set LQ_DIRTY for lq_rr when statfs get
error, this flag does not affect any change for pool list at
lod_qos_calc_rr().

Change behaviour for lod_check_and_reserve_ost(), it  would sleep
during object allocation for speed 2 only.

HPE-bug-id: LUS-10388
Signed-off-by: Alexander Boyko <alexander.boyko@hpe.com>
Change-Id: I4768c4cf7d2f9f02f0a9e0dfb6d15e02932cb5fe
Reviewed-on: https://review.whamcloud.com/45921
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Alexey Lyashkov <alexey.lyashkov@hpe.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-13783 sec: support of native Ubuntu 20.04 HWE 5.8 kernel 38/46238/10
James Simmons [Thu, 17 Feb 2022 13:44:22 +0000 (06:44 -0700)]
LU-13783 sec: support of native Ubuntu 20.04 HWE 5.8 kernel

For Linux 5.5 kernel a patch to improve nokey names was landed
that removed several variables that Lustre's llite and mdt layer
were using. Rework the code to use other defines that exist.
Second change for Ubuntu is several backports to handle a few
variables changing across different kernel versions. One is the name
change of DCACHE_ENCRYPTED_NAME and the other being
is_chipertext_name. So the simpler approach Ubuntu took was to use
fscrypt_prepare_lookup() and fscrypt_is_nokey_name() to work
around these changes. Lastly the good news is for 5.12 the
stomping of ll_d_ops no longer happens and the special
revalidate_dentry fscrypto function is exported.

Change-Id: I7f70fe9abddf34798e2e01b35099c9a032d92b91
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-on: https://review.whamcloud.com/46238
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Jian Yu <yujian@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15317 osc: Add RPC to iotrace 94/45894/8
Patrick Farrell [Wed, 9 Feb 2022 21:25:10 +0000 (16:25 -0500)]
LU-15317 osc: Add RPC to iotrace

Add RPCs to iotrace debugging.

To avoid creating too much debug output, this debug
ignores the possiblity that an RPC contains non-contiguous
extents.  Thus the eventual visualization will act as
though the RPC is a continuous whole.  I judge this to be
superior to the amount of log data and complexity of
capturing each extent separately.  If that level of detail
is needed, a higher debug level can be used.

Test-parameters: trivial

Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I6fe416ba44be5572f130704ba9d3e9b85d09c656
Reviewed-on: https://review.whamcloud.com/45894
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15317 llite: Add COMPLETED iotrace messages 84/46484/3
Patrick Farrell [Wed, 9 Feb 2022 21:14:23 +0000 (16:14 -0500)]
LU-15317 llite: Add COMPLETED iotrace messages

It's very useful to see how long an I/O call took.  There
are other ways to do this, but the goal is for iotrace to
provide all necessary information for basic I/O performance
analysis, so we add COMPLETED messages to iotrace.

Test-Parameters: trivial

Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I17f52ebc87a31d5ba34f63dc8b6a279e83cd10ef
Reviewed-on: https://review.whamcloud.com/46484
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15317 llite: Add FID to async ra iotrace 12/45912/7
Patrick Farrell [Tue, 21 Dec 2021 16:34:53 +0000 (11:34 -0500)]
LU-15317 llite: Add FID to async ra iotrace

IOtrace log entries need to include the FID of the file
concerned.  Add this to async readahead.

test-parameters: trivial

Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I8d788969f29412ce88f1cafa229977f6efa20962
Reviewed-on: https://review.whamcloud.com/45912
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15317 llite: Add strided readahead to iotrace 88/45888/4
Patrick Farrell [Sat, 18 Dec 2021 21:27:59 +0000 (16:27 -0500)]
LU-15317 llite: Add strided readahead to iotrace

We need to capture some additional parameters to correctly
understand the behavior of strided readahead.  Add these
parameters to the existing iotrace message.

test-parameters: trivial

Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I7caddf9dfaf9ba5f2645d045d5a4a50562cc1b54
Reviewed-on: https://review.whamcloud.com/45888
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15317 llite: Make iotrace logging quieter 87/45887/4
Patrick Farrell [Sat, 18 Dec 2021 21:23:52 +0000 (16:23 -0500)]
LU-15317 llite: Make iotrace logging quieter

Most of the time, we don't read any pages with readahead,
since we're moving through the window and aren't ready to
read more yet.  That's important for readahead debug, but
there's no need to log it for iotrace.  (This matters
because without this change, this messsage is the large
majority of iotrace messages.)

test-parameters: trivial

Signed-off-by: Patrick Farrell <pfarrell@whamcloud.com>
Change-Id: I58197acd1ef97c903320a2433ec1d5dcb0e46bd0
Reviewed-on: https://review.whamcloud.com/45887
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-11787 test: Fix checkfilemap tests for 64K page 29/45629/11
James Simmons [Mon, 31 Jan 2022 17:44:46 +0000 (12:44 -0500)]
LU-11787 test: Fix checkfilemap tests for 64K page

File mapping is page size aligned. Modify the tests to handle 64K
page.

Test-Parameters: trivial clientdistro=el8.5 clientarch=aarch64 testlist=sanityn env=ONLY="71a 71b"
Test-Parameters: trivial clientdistro=el8.5 clientarch=ppc64le testlist=sanityn env=ONLY="71a 71b"
Change-Id: I316a197db8cdd0f9064431f8c572b43adf6110b8
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Reviewed-on: https://review.whamcloud.com/45629
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15583 build: Update ZFS version to 2.1.2 91/45591/6
Jian Yu [Wed, 11 May 2022 23:26:41 +0000 (16:26 -0700)]
LU-15583 build: Update ZFS version to 2.1.2

Update ZFS version to 2.1.2. The changes are listed in:
https://github.com/openzfs/zfs/releases/tag/zfs-2.1.2

Change-Id: If7c81a4b1fe13e29eea1c277b896223f5c06b31a
Signed-off-by: Jian Yu <yujian@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/45591
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Reviewed-by: Nathaniel Clark <nclark@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15207 libcfs: reset hs_rehash_bits 33/45533/8
Alex Zhuravlev [Thu, 11 Nov 2021 08:19:46 +0000 (11:19 +0300)]
LU-15207 libcfs: reset hs_rehash_bits

if rehash work is cancelled, then nobody resets
hs_rehash_bits and the first iterator asserts
at LASSERT(!cfs_hash_is_rehashing(hs)) in
cfs_hash_for_each_relax().

Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Change-Id: I1a567f6be77ca6c45e5d4f256722206b12588554
Reviewed-on: https://review.whamcloud.com/45533
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: James Simmons <jsimmons@infradead.org>
Tested-by: jenkins <devops@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
3 months agoLU-15193 quota: expand QUOTA_MAX_TRANSIDS to 12 56/45456/6
Lei Feng [Thu, 4 Nov 2021 11:41:06 +0000 (19:41 +0800)]
LU-15193 quota: expand QUOTA_MAX_TRANSIDS to 12

In some rare cases 12 quota ids are needed.
Usually (user, group) * (block, inode) * (inode, parent) = 8 qids
are needed. But with project id,
(user, group, project) * (block, inode) * (inode, parent) = 12 qids
are needed.

Change-Id: I4b3ee197f6e274abda06edf60b246f089fe28d10
Signed-off-by: Lei Feng <flei@whamcloud.com>
Test-Parameters: trivial testlist=sanity-quota
Reviewed-on: https://review.whamcloud.com/45456
Tested-by: jenkins <devops@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Tested-by: Maloo <maloo@whamcloud.com>
Reviewed-by: Stephane Thiell <sthiell@stanford.edu>
Reviewed-by: Oleg Drokin <green@whamcloud.com>