Whamcloud - gitweb
fs/lustre-release.git
3 years agoLU-7674 lmv: remove unused placement parameter 19/18019/4
John L. Hammond [Fri, 15 Jan 2016 17:21:43 +0000 (11:21 -0600)]
LU-7674 lmv: remove unused placement parameter

Remove the unused lmv.*.placement parameter along with supporting
functions and struct members.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I20274002ad429550d15c4c204899f897f1c69d0f
Reviewed-on: http://review.whamcloud.com/18019
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7619 obdclass: protect REFASSERT() with lu_ref::lf_guard 56/17756/2
Bruno Faccini [Wed, 30 Dec 2015 16:39:48 +0000 (17:39 +0100)]
LU-7619 obdclass: protect REFASSERT() with lu_ref::lf_guard

Some REFASSERT()s have been added by previous changes, but not
under required lu_ref::lf_guard spin-lock protection.
This can cause unexpected "self" dead-lock situations (vs
LBUG/ASSERT!!) upon lu_ref failure detection.

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Change-Id: If23d43f6fca196a33602b6bb8f051c0a4e26a300
Reviewed-on: http://review.whamcloud.com/17756
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
3 years agoLU-1095 lod: quiet "wanted N, found M" console message 31/17131/5
Andreas Dilger [Thu, 12 Nov 2015 00:39:01 +0000 (17:39 -0700)]
LU-1095 lod: quiet "wanted N, found M" console message

Quiet the relatively useless "wanted 1, found 0" console message from
lod_alloc_qos(), since this is not a fatal error - the MDS will fall
back to lod_alloc_rr() in this case.

Clean up lod_alloc_qos() to use a sensible variable name "lod" for the
LOD OBD device instead of "m", which doesn't really mean anything.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: I882636a6b89fa2bcf76383ede8486be9c4300c1e
Reviewed-on: http://review.whamcloud.com/17131
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-4739 obd: Fixing code inconsistencies and coding style 20/10420/6
Bobbie Lind [Tue, 20 May 2014 20:34:37 +0000 (14:34 -0600)]
LU-4739 obd: Fixing code inconsistencies and coding style

config_llog_instance is referenced differently in these functions
than anywhere else in the code.  This patch corrects that as well
as fixing some coding style errors.

Signed-off-by: Bobbie Lind <bobbie.j.lind@intel.com>
Change-Id: I9de1a37e397ffcf660422d3adfeb2f59881ea210
Reviewed-on: http://review.whamcloud.com/10420
Tested-by: Jenkins
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-6429 tests: fix typo in previous patch 26/21026/2
Yang Sheng [Tue, 28 Jun 2016 07:36:36 +0000 (15:36 +0800)]
LU-6429 tests: fix typo in previous patch

Fix typo reformat_mdt to format_mdt.

Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Change-Id: I0a78c44e16da496b071b649c10d072364f73d90d
Reviewed-on: http://review.whamcloud.com/21026
Tested-by: Jenkins
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8284 osd-ldiskfs: i_size updates from BRW should be atomic 16/20816/4
Andrew Perepechko [Wed, 15 Jun 2016 18:03:41 +0000 (21:03 +0300)]
LU-8284 osd-ldiskfs: i_size updates from BRW should be atomic

In osd_write_commit(), it is possible that somewhere between
i_size_read() check and i_size_write() another write updates
i_size to a larger value. In the end, we will have a lower
i_size value than we should.

Change-Id: I720a6cc1214e3e6b32df4f9e2c1017a47e7962f0
Signed-off-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@seagate.com>
Reviewed-by: Alexander Nikolaevich Boyko <alexander.boyko@seagate.com>
Seagate-bug-id: MRP-3528
Reviewed-on: http://review.whamcloud.com/20816
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8199 ptlrpc: better lut_reply_bitmap handling 50/20450/3
Nathaniel Clark [Wed, 25 May 2016 18:58:32 +0000 (14:58 -0400)]
LU-8199 ptlrpc: better lut_reply_bitmap handling

Use OBD_ALLOC_LARGE instead of OBD_ALLOC to allocate chunks because of
size.  Also ensure they are free'd correctly.
Better return checking of tgt_bitmap_chunk_alloc by callers.
Check lut_reply_bitmap[chunk] is non-null in tgt_clear_reply_slot (in
case tgt_bitmap_chunk_alloc did fail).
Don't leak lut_replay_bitmap chunks if tgt_init fails.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Change-Id: Ib222300a8c6d0032834d774cde9a9cb3830fb289
Reviewed-on: http://review.whamcloud.com/20450
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Grégoire Pichon <gregoire.pichon@bull.net>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7234 mgs: For handling dash in FSNAME 01/16901/3
Rajesh T G [Wed, 21 Oct 2015 09:42:26 +0000 (15:12 +0530)]
LU-7234 mgs: For handling dash in FSNAME

For FSNAME 'lustre-1, function mgs_llog_open() in mgs_handler.c has
been modified to call strrchr instead of strchr so that 'logname'
variable is updated with entire FSNAME including '-'.

Seagate-bug-id: MRP-2790
Signed-off-by: Sundarraj Illindra <sundarraj.illindra@seagate.com>
Change-Id: I07b2b874f4cf881d0aa2c07586a113fcce8bebfe
Reviewed-on: http://review.whamcloud.com/16901
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8353 mdt: mdt unlink should lock before lookup 88/21088/2
Lai Siyao [Wed, 29 Jun 2016 12:49:24 +0000 (20:49 +0800)]
LU-8353 mdt: mdt unlink should lock before lookup

MDT unlink should lock parent before lookup child, otherwise the
child may be stale in use later.

Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Change-Id: I70560beba7f689bb183ba83c698babc4ce024ece
Reviewed-on: http://review.whamcloud.com/21088
Tested-by: Jenkins
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8343 build: fix kmod_version on SLES 12 21/21021/9
Minh Diep [Mon, 27 Jun 2016 22:51:15 +0000 (15:51 -0700)]
LU-8343 build: fix kmod_version on SLES 12

Starting SLES 12, the kernel-module-subpackage script added a 'k' in
Provides string, here is the sample

%package -n %{-n*}-kmp-%1
%define _this_kmp_version %{-v*}_k%(echo %2 | sed -r 'y/-/_/; \
%s/^(2\.6\.[0-9]+)_/\\1.0_/; # use 2.6.x.0 for mainline kernels')
...
Provides: %{-n*}-kmp = %_this_kmp_version

Change-Id: I5c4a8af03d70862aaca46e41b737a62491cc3cf7
Signed-off-by: Minh Diep <minh.diep@intel.com>
Reviewed-on: http://review.whamcloud.com/21021
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Christopher J. Morrone <morrone2@llnl.gov>
3 years agoLU-8319 fid: fix race in fid allocation 39/20939/3
Fan Yong [Sun, 15 May 2016 02:35:24 +0000 (10:35 +0800)]
LU-8319 fid: fix race in fid allocation

There is race condition when allocating fid/seq in parallel
as following:

The thread1 will release the lcs_mutex via seq_fid_alloc_prep(),
then another fid allocation thread2 can obtain the lcs_mutex and
allocate FID in the new sequence that has just been allocated by
the thread1 via seq_client_alloc_seq(); and then after thread2
released the lcs_mutex, the thread1 will re-allocate the current
FID in the new sequence without checking whether some others have
already taken such FID in the new sequence during it re-obtaining
the lcs_mutex.

Such race will cause two objects to use the same FID, and trigger
OI conflict and LMA verification failures.

This patch makes the fid allocation and lu_client_seq modification
to be protected by the lcs_mutex.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Change-Id: I79c250f57b73d0abd7d039eea02424ae438f1b56
Reviewed-on: http://review.whamcloud.com/20939
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-8377 build: clean up .rpmmacros 99/21199/3
Minh Diep [Thu, 7 Jul 2016 22:53:21 +0000 (15:53 -0700)]
LU-8377 build: clean up .rpmmacros

Landing LU-5614 causing ~/.rpmmacros to fill up on every build

Test-Parameters: trivial

Change-Id: Iecf6cc01e90ae951b878d9f0b99b0a3f4ae9ad31
Signed-off-by: Minh Diep <minh.diep@intel.com>
Reviewed-on: http://review.whamcloud.com/21199
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-4039 tests: EXCEPT replay-single test 90 24/21224/3
James Nunez [Fri, 8 Jul 2016 22:05:25 +0000 (16:05 -0600)]
LU-4039 tests: EXCEPT replay-single test 90

replay-single test 90 is failing multiple times a day on
the master branch. Add this test to the ALWAYS_EXCEPT list.

Test-Parameters: trivial testlist=replay-single

Signed-off-by: James Nunez <james.a.nunez@intel.com>
Change-Id: I8803b545268fe717d9f5d285bf59bfa360564d57
Reviewed-on: http://review.whamcloud.com/21224
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoRevert "LU-7334 lov: Cleanup lov_stripe proc files" 29/21129/2
Oleg Drokin [Fri, 1 Jul 2016 17:18:16 +0000 (17:18 +0000)]
Revert "LU-7334 lov: Cleanup lov_stripe proc files"

Causes problems with default striping described in LU-8338

This reverts commit d34b9dfbebc8d313be9c12a96b660a34ad45edcb.

Change-Id: Ib09cc449f9d826f31799ea0a2211820d3c443456
Reviewed-on: http://review.whamcloud.com/21129
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8055 ldev: Add %H and %b to command sub 40/20040/9
Giuseppe Di Natale [Thu, 5 May 2016 22:43:28 +0000 (15:43 -0700)]
LU-8055 ldev: Add %H and %b to command sub

Introduced %H and %b substitutions for hostname
and backend file system, respectively.

Test-Parameters: trivial testlist=conf-sanity
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Change-Id: I9b50defee43307f614106de4ad75e1fa9267e23b
Reviewed-on: http://review.whamcloud.com/20040
Reviewed-by: Olaf Faaland-LLNL <faaland1@llnl.gov>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8055 ldev: File system label filtering 38/19738/14
Giuseppe Di Natale [Thu, 5 May 2016 22:17:24 +0000 (15:17 -0700)]
LU-8055 ldev: File system label filtering

Introduced -F option to ldev. The -F requires
a file system name to be provided. All labels
associated with that file system will be
printed to stdout. The new option can also be
used with command substitution.

Test-Parameters: trivial testlist=conf-sanity

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Change-Id: I50726371dce809e4d1b4f3de6f530d6f637856a1
Reviewed-on: http://review.whamcloud.com/19738
Tested-by: Jenkins
Reviewed-by: Olaf Faaland-LLNL <faaland1@llnl.gov>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7317 tests: Called the error function where it was missing. 88/16888/11
Aditya Pandit [Tue, 20 Oct 2015 06:50:11 +0000 (12:20 +0530)]
LU-7317 tests: Called the error function where it was missing.

There were bunch of files where error function was missing
Found this by executing grep '|| "' ./*.sh -r
and grep '&& "' ./*sh -r in lustre/tests directory.
Called the error function for those messages.

Seagate-bug-id: MRP-3028
Change-Id: I204008234e36dcb49e28e5256b93bbb0bbaeaea5
Signed-off-by: Aditya Pandit <aditya.pandit@seagate.com>
Signed-off-by: Ashish Purkar <ashish.purkar@seagate.com>
Reviewed-on: http://review.whamcloud.com/16888
Reviewed-by: Jian Yu <jian.yu@intel.com>
Tested-by: Jenkins
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8331 kernel: kernel update [SLES11 SP4 3.0.101-77] 02/21002/2
Bob Glossman [Mon, 27 Jun 2016 15:46:40 +0000 (08:46 -0700)]
LU-8331 kernel: kernel update [SLES11 SP4 3.0.101-77]

Update SLES11 SP4 kernel to 3.0.101-77

Test-Parameters: mdsdistro=sles11sp4 ossdistro=sles11sp4 \
  clientdistro=sles11sp4 mdsfilesystemtype=ldiskfs \
  mdtfilesystemtype=ldiskfs ostfilesystemtype=ldiskfs \
  testgroup=review-ldiskfs

Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Change-Id: Iae1a185cfd054a43e4d4251e0e4f3bb4831065fd
Reviewed-on: http://review.whamcloud.com/21002
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Minh Diep <minh.diep@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8316 tgt: return -ENOMEM while kmalloc failed 18/20918/2
Yang Sheng [Wed, 22 Jun 2016 13:17:46 +0000 (21:17 +0800)]
LU-8316 tgt: return -ENOMEM while kmalloc failed

Return valid value in tgt_init().

Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Change-Id: Iaaa3697aca42d84011886a360fb31576ed4b53df
Reviewed-on: http://review.whamcloud.com/20918
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8270 ptlrpc: correct use of list_add_tail() 84/20784/3
John L. Hammond [Tue, 14 Jun 2016 18:41:18 +0000 (13:41 -0500)]
LU-8270 ptlrpc: correct use of list_add_tail()

In sptlrpc_gc_add_sec() swap the arguments to list_add_tail() so that
it does what we meant it to do.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I98f4cc0cdf3e271f003c1242b36a317025974c02
Reviewed-on: http://review.whamcloud.com/20784
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8056 lloop: fix bio_for_each_segment_all for newer kernels 19/20619/4
James Simmons [Tue, 21 Jun 2016 14:30:07 +0000 (10:30 -0400)]
LU-8056 lloop: fix bio_for_each_segment_all for newer kernels

Lustre patch http://review.whamcloud.com/20478 back ported
bio_for_each_segment_all from newer kernels but support
for newer kernels was done incorrectly. Update the code to
work with newer kernels.

Change-Id: I6a926320f80113169a13d2319190721c83d58b1d
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: http://review.whamcloud.com/20619
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Li Dongyang <dongyang.li@anu.edu.au>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7334 lprocfs: Allow default multiplier of 1 55/20455/7
Giuseppe Di Natale [Wed, 25 May 2016 23:23:28 +0000 (16:23 -0700)]
LU-7334 lprocfs: Allow default multiplier of 1

A new default unit '1' is accepted by lprocfs_str_with_units_to_s64
to indicate a default multiplier of 1.

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Change-Id: Iebf29f5d3c36e583729ea717288850729b99eeed
Reviewed-on: http://review.whamcloud.com/20455
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8174 llite: restore fd_och when putting lease 31/20331/6
Henri Doreau [Thu, 19 May 2016 16:31:16 +0000 (18:31 +0200)]
LU-8174 llite: restore fd_och when putting lease

fd_och was not restored when putting back a file lease, preventing
from getting a lease, putting it back and taking it again on a FD.

Expand regression tests accordingly.

Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Change-Id: I1ad63c5332ee14bdac780f1d74794ac8827186cf
Reviewed-on: http://review.whamcloud.com/20331
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8056 o2iblnd: ib_query_device removed in 4.5 21/20221/7
Li Dongyang [Mon, 20 Jun 2016 02:46:30 +0000 (22:46 -0400)]
LU-8056 o2iblnd: ib_query_device removed in 4.5

We should use the cached attributes in ib_device instead of
calling ib_query_device since kernel 4.5

Linux-commit:182a2da0c768a9ec64abb0d6009667057f1c06af
Linux-commit:cebfe5ca038e2a0f677b41e9682501708ffa2ff3

Signed-off-by: Li Dongyang <dongyang.li@anu.edu.au>
Change-Id: Ie2ab681a3b508f0a1f89d3ff86bf2713b7257e62
Reviewed-on: http://review.whamcloud.com/20221
Tested-by: Jenkins
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8003 llite: remove obsolete code and comments 81/19881/3
John L. Hammond [Fri, 29 Apr 2016 12:03:10 +0000 (07:03 -0500)]
LU-8003 llite: remove obsolete code and comments

Remove obsolete comments about the behavior of ll_ddelete() and the
removed function ll_d_iput(). Remove '#if 0'-ed out code from
ll_ddelete().

Test-Parameters: trivial

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: Id2f2eed8e96ee07fdcd4ec14c4e82ed463752562
Reviewed-on: http://review.whamcloud.com/19881
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-6401 obdclass: make get/set_wire_obdo non-inline 66/19266/6
Ben Evans [Thu, 31 Mar 2016 19:15:28 +0000 (14:15 -0500)]
LU-6401 obdclass: make get/set_wire_obdo non-inline

In http://review.whamcloud.com/#/c/16917/ it was requested that
lustre_get_wire_obdo and lustre_set_wire_obdo to not be
inlined functions.

Signed-off-by: Ben Evans <bevans@cray.com>
Change-Id: Ia0537dfbf2fdbd5e83fe49cda4ab6213d999e5e2
Reviewed-on: http://review.whamcloud.com/19266
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-3105 llite: Remove unused lli_open_count from ll_inode_info 44/18544/4
Oleg Drokin [Mon, 20 Jun 2016 02:41:00 +0000 (22:41 -0400)]
LU-3105 llite: Remove unused lli_open_count from ll_inode_info

It was only used by now removed capabilities code.

Change-Id: Ica5617b0408cacbfbc7b08000e5d98a655f08e31
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/18544
Tested-by: Jenkins
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-5282 mdc: fix panic at mdc_free_open() 95/17495/13
Alexander Boyko [Thu, 3 Dec 2015 06:57:36 +0000 (09:57 +0300)]
LU-5282 mdc: fix panic at mdc_free_open()

Assertion was happened for open request when rq_replay is set
to 1.
    ASSERTION(mod->mod_open_req->rq_replay == 0)
But this situation is not fatal for client, and could happened
when mdc_close() failed.
The fix allow to free such requests. If mdc_close fail, MDS doesn`t
receive close request from client. And in a worst case client would
be evicted.

The test recreates issue when mdc_close failed and
client asserts:
   ASSERTION( mod->mod_open_req->rq_replay == 0 ) failed

Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Seagate-bug-id: MRP-3156
Change-Id: I5f98901f633355849fc107149eadc9cf171819af
Reviewed-on: http://review.whamcloud.com/17495
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7931 tests: setup/cleanup after every test script 08/6208/7
Andreas Dilger [Wed, 30 Mar 2016 08:09:54 +0000 (02:09 -0600)]
LU-7931 tests: setup/cleanup after every test script

Setup and cleanup the filesystem after every acceptance-small.sh
test to try and catch problems with module references when they
happen instead of causing later tests to fail in mysterious ways.

Test-Parameters: trivial
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: I0136ef81c601e7b9ee968ac62d674a8b16500c1e
Reviewed-on: http://review.whamcloud.com/6208
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8303 lnet: make connection more stable with packet loss 74/20874/2
Alexander Boyko [Sun, 19 Jun 2016 12:56:51 +0000 (15:56 +0300)]
LU-8303 lnet: make connection more stable with packet loss

IB network may lose last connection handshake packet.
This problem isn't Lustre specific and described at
https://oss.oracle.com/pipermail/rds-devel/2007-December/000271.html
as example.
Solution is to make conection established if any packet is received
for it.

Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@seagate.com>
Seagate-bug-id: MRP-2883
Change-Id: I9bf69fdca24e51a5de06c92e9ad76b4e040c5d65
Reviewed-on: http://review.whamcloud.com/20874
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-6215 build: announce linux kernel 4.4.6 support 43/20543/3
James Simmons [Wed, 1 Jun 2016 15:09:32 +0000 (11:09 -0400)]
LU-6215 build: announce linux kernel 4.4.6 support

Bump kernel version in ChangeLog to latest supported
kernel which is 4.4.6

Change-Id: I920e1139cc7abef82677e9ba79abfdc137dd205b
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: http://review.whamcloud.com/20543
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8125 nrs: pol_arg should be copied after the policy starts 64/20164/7
Emoly Liu [Fri, 24 Jun 2016 01:21:13 +0000 (09:21 +0800)]
LU-8125 nrs: pol_arg should be copied after the policy starts

NRS policy->pol_arg should be copied to a given policy argument
after the policy starts, otherwise a wrong argument will be saved
and it will cause LBUG when we run "lctl get_param" to get NRS
policy.
sanityn.sh test_77h is added to verify this patch.

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Change-Id: I5a015bb44fa88f69a4d5347cc2721eb72a57c8ad
Reviewed-on: http://review.whamcloud.com/20164
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7623 lnet: remove useless cast 50/18950/9
James Simmons [Thu, 23 Jun 2016 17:38:13 +0000 (13:38 -0400)]
LU-7623 lnet: remove useless cast

In the cleanup of the user land / kernel pointers a
small cleanup was missed which removed a cast no
longer needed for a call of lnet_ping(). This brings
us into sync with the upstream client.

Change-Id: Ib281aaac7f2a1516d8586fbf3d10dee18cd77873
Signed-off-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-on: http://review.whamcloud.com/18950
Tested-by: Jenkins
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8022 lnet: Correct position of lnet_ni_decref() 01/21001/2
Doug Oucharek [Mon, 27 Jun 2016 17:34:44 +0000 (10:34 -0700)]
LU-8022 lnet: Correct position of lnet_ni_decref()

In fix http://review.whamcloud.com/#/c/19614/, the call
to lnet_ni_decref() should have followed the routines
which are using the NI.  This patch correct that.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Change-Id: I55fba4904cc6442f63cf03bf2e3614a7946200f7
Reviewed-on: http://review.whamcloud.com/21001
Tested-by: Jenkins
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-4039 tests: ensure osc import in FULL state 31/20931/4
Yang Sheng [Wed, 22 Jun 2016 18:41:12 +0000 (02:41 +0800)]
LU-4039 tests: ensure osc import in FULL state

The osp import may not in FULL state when
replay-single:test_90 start running. It
was caused by test_89, we should waiting
import valid then start next step.

Test-Parameters: trivial testlist=replay-single,replay-single,replay-single,replay-single
Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Change-Id: I93746137c038183bf114619f53654af1bcaa68eb
Reviewed-on: http://review.whamcloud.com/20931
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-7759 llite: handle inactive OSTs better in statfs 95/19195/28
Andreas Dilger [Tue, 29 Mar 2016 17:29:57 +0000 (11:29 -0600)]
LU-7759 llite: handle inactive OSTs better in statfs

Change the order of checks for inactive OSCs in lov_prep_statfs_set()
so that administratively disabled OSTs do not generate any output in
"lfs df" at all, to avoid needlessly cluttering the output.

Enable the lazystatfs mount option by default, so that "df" does not
hang when an OST is temporarily offline.

Fix test-framework.sh to use "lfs df $MOUNT" instead of "df $MOUNT" to
determine when recovery is complete, now that "df" does not block.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: I993761a7eb120a36a1b80c2822cb6d8011ccab07
Reviewed-on: http://review.whamcloud.com/19195
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8259 osd-ldiskfs update all *_seq_write() to use "const char __user *buffer" 87/20887/2
Parinay Kondekar [Mon, 20 Jun 2016 11:30:59 +0000 (17:00 +0530)]
LU-8259 osd-ldiskfs update all *_seq_write() to use "const char __user *buffer"

All *_seq_write functions in lustre/osd-ldiskfs/osd_lproc.c declare
buffer as "const char *buffer" and should use "const char __user *buffer"
instead.

This patch takes care of this change.

Change-Id: Ida44679f721a37cf71f327a6f00f3f8857ba0376
Signed-off-by: Parinay Kondekar <parinay.kondekar@seagate.com>
Reviewed-on: http://review.whamcloud.com/20887
Tested-by: Jenkins
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8176 libcfs: Add file_dentry() & file_inode() wrapper 76/20576/10
Yang Sheng [Mon, 20 Jun 2016 02:34:31 +0000 (22:34 -0400)]
LU-8176 libcfs: Add file_dentry() & file_inode() wrapper

Use file_dentry() & file_inode() wrappers to sync
with upstream.

Signed-off-by: Yang Sheng <yang.sheng@intel.com>
Change-Id: I7e62871789617a07dfe083a60374885099d25d51
Reviewed-on: http://review.whamcloud.com/20576
Tested-by: Jenkins
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8197 ptlrpc: do not reduce replay request deadline 99/20399/4
Vladimir Saveliev [Sat, 21 May 2016 03:10:43 +0000 (06:10 +0300)]
LU-8197 ptlrpc: do not reduce replay request deadline

New timeout for a replay request sent to a client with early reply is
calculated without taking into account that new deadline for the
replay request on server side is calculated based upon
obd_recovery_timeout. That results in reducing replay deadline which
forces to early disconnect of the client.

Calculate the timeout sent in early reply to a replay request in
according to new deadline of the replay request on server side.

Seagate-bug-id: MRP-3249
Signed-off-by: Vladimir Saveliev <vladimir.saveliev@seagate.com>
Change-Id: I478ca84a9627816be886a077170285f8af4bfc29
Reviewed-on: http://review.whamcloud.com/20399
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8159 osd-ldiskfs: cache xattr in osd-ldiskfs 96/20496/3
Lai Siyao [Tue, 24 May 2016 01:56:08 +0000 (09:56 +0800)]
LU-8159 osd-ldiskfs: cache xattr in osd-ldiskfs

In LU-7660 LOD doesn't cache default striping, so each create will
get it from bottom. LU-7660 has enabled xattr cache in OSP, and
osd-zfs caches xattr already, this patch introduces a similar
mechanism in osd-ldiskfs.

Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Change-Id: I3382119acaf9a819ee2be9737d1eae833e9ea2a4
Reviewed-on: http://review.whamcloud.com/20496
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7702 ldlm: skip lock if export failed 20/18120/9
Alexander Boyko [Wed, 15 Jun 2016 06:12:14 +0000 (14:12 +0800)]
LU-7702 ldlm: skip lock if export failed

This patch resolves IO vs eviction race.
After eviction failed export stayed at stale list,
a client had IO processing and reconnected during it.
A client sent brw rpc with last lock cookie and new connection.
The lock with failed export was found and assert was happened.
(ost_handler.c:1812:ost_prolong_lock_one())
ASSERTION( lock->l_export == opd->opd_exp ) failed:

1. Skip the lock at ldlm_handle2lock if lock export failed.
2. Validation of lock for IO was added at hpreq_check(). The lock
   searching is based on granted interval tree. If server doesn`t
   have a valid lock, it reply to client with ESTALE.
3. A lock prolong was moved at ldlm layer.

Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Seagate-bug-id: MRP-2787
Change-Id: I2177736564c3b8164f1ad3e4cc02dca1704a0e6e
Reviewed-on: http://review.whamcloud.com/18120
Reviewed-by: Fan Yong <fan.yong@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5614 build: use %kernel_module_package in rpm spec 63/12063/50
Stephen Champion [Tue, 6 Oct 2015 10:16:25 +0000 (15:46 +0530)]
LU-5614 build: use %kernel_module_package in rpm spec

Replace module packages definitions with calls to the vendor defined
%kernel_module_package macro.  This results in many of the rpm packages
changing names from what we are used to in the past.  Each Linux
distribution may name the modules packages slightly differently, most
notably RHEL and SLES choose different naming schemes.  The
%kernel_module_package macro handles these details for us.

For instance, on RHEL7 the packages that contain lustre's kernel modules
become:

  kmod-lustre             (previously in "lustre-modules" package)
  kmod-lustre-osd-ldiskfs (previously in "lustre-osd-ldiskfs" package)
  kmod-lustre-osd-zfs     (previously in "lustre-osd-zfs" package)
  kmod-lustre-tests       (previously in "lustre-tests" package)

On SLES12, the same packages are instead named:

  lustre-kmp-default
  lustre-osd-ldiskfs-kmp-default
  lustre-osd-zfs-kmp-default
  lustre-tests-kmp-default

These kernel module packages give us what is known as "weak-updates".
Instead of compiling Lustre for every minor kernel that is installed,
the weak-updates will automatically symlink the Lustre modules into
and kernel's modules subdirectories if that kernel offers the required
kernel symbols with exactly the same symbol versions.

In addition to changing the package names for all of the Lustre packages
containing kernel modules, the location of the modules in /lib/modules
changes as well.  Each package will put its modules in a subdirectory
matching part of the package name itself (required by the macros on RHEL
systems).  The path name is also different on RHEL and SLES systems
(e.g. "extra" vs. "updates").

Some further path examples are:

  RHEL7, kmod-lustre package:
    /lib/modules/3.10.0-327.18.2.el7_lustre.x86_64/extra/lustre/fs/ost.ko

  SLES12, lustre-kmp-default package:
    /lib/modules/3.12.57-60.35_lustre-default/updates/lustre/fs/ost.ko

  RHEL7, kmod-lustre-osd-ldiskfs package:
    /lib/modules/3.10.0-327.18.2.el7_lustre.x86_64/extra/lustre-osd-ldiskfs/fs/osd_ldiskfs.ko

  SLES12, lustre-osd-ldiskfs-kmp-default package:
    /lib/modules/3.12.57-60.35_lustre-default/updates/lustre-osd-ldiskfs/fs/osd_ldiskfs.ko

Test-Parameters: trivial clientdistro=el6.7 mdsdistro=el6.7 ossdistro=el6.7
Signed-off-by: Stephen Champion <schamp@sgi.com>
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Change-Id: Ic5351f4bda94eae80eaf349c8490a2c758b15c80
Signed-off-by: Minh Diep <minh.diep@intel.com>
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/12063
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7418 tests: avoid background writeout in sanity 29 29/20929/2
Andreas Dilger [Wed, 22 Jun 2016 17:36:10 +0000 (11:36 -0600)]
LU-7418 tests: avoid background writeout in sanity 29

Intermittent failures of sanity.sh test_29 are caused by background
writeout starting (or continuing) after the MDC DLM locks were
cancelled, requiring the layout lock to be re-fetched from the MDS.
Cancelling the DLM locks via "lru_size=clear" is not enough, since
this will not cancel any locks that are currently in use.

Instead, ensure that all the dirty pages from previous tests are
written out so that no new writes are started during the test.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: Ie45965a974e0cd170f969fa122e1762c2361c278
Reviewed-on: http://review.whamcloud.com/20929
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoRevert "LU-5810 tests: add client hostname to lctl mark" 94/20894/3
James Nunez [Tue, 21 Jun 2016 14:56:18 +0000 (14:56 +0000)]
Revert "LU-5810 tests: add client hostname to lctl mark"

Adding hostname to individual lines in test logs broke autotest's
parsing of logs and resulted in no console logs being uploaded to
Maloo. In addition, the way that we added hostname to the log
output was nosier than expect and needs to be reworked.

This reverts commit 9c4156e6fc146a198bb342e28eb246f1076889bd.

Change-Id: I6d7c38fd37edc975bc4f5e1ff5c825d4899af474
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Reviewed-on: http://review.whamcloud.com/20894
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Tested-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7542 obdclass: quiet lockdep recursive lock warning 82/17582/4
Andreas Dilger [Fri, 11 Dec 2015 00:34:58 +0000 (17:34 -0700)]
LU-7542 obdclass: quiet lockdep recursive lock warning

Lockdep complains about potential recursive locking during mount
because the client configuration log is holding a lock on the MGC
obd_device to prevent it from being torn down, while also getting
locks on the MDC and OSC devices as they are instantiated:

 Lustre: Mounted myth-client
 =============================================
 [ INFO: possible recursive locking detected ]
 ---------------------------------------------

 2 locks held by ll_cfg_requeue/1460:
 #0:  (&cli->cl_sem){.+.+..}, at mgc_requeue_thread+0x27d/0x5d8 [mgc]
 #1:  (&cld->cld_lock){+.+...}, at mgc_process_log+0x88/0xc01 [mgc]

 CPU: 3 PID: 1460 Comm: ll_cfg_requeue
 Call Trace:
 [<ffffffff814cb360>] dump_stack+0x4f/0x6f
 [<ffffffff81081d73>] __lock_acquire+0xc06/0xc74
 [<ffffffff81081f4f>] lock_acquire+0x16e/0x194
 [<ffffffff814ce5d7>] down_read+0x4c/0x61
 [<ffffffffa029f370>] sptlrpc_conf_client_adapt+0x95/0x142 [ptlrpc]
 [<ffffffffa03a7a69>] mdc_set_info_async+0xeb/0x420 [mdc]
 [<ffffffffa01ad69e>] class_notify_sptlrpc_conf+0x2f4/0x347 [obdclass]
 [<ffffffffa04a805c>] mgc_process_log+0xa31/0xc01 [mgc]
 [<ffffffffa04a94ef>] mgc_requeue_thread+0x31f/0x5d8 [mgc]
 [<ffffffff81061f77>] kthread+0xfa/0x102

Add a separate lock class for the MGC callpath, since it will always
be held first, and none of the other obd_device locks should ever
be held concurrently.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: Ic36e64608d12dcd4f5b12056e3e2072ca6500c1e
Reviewed-on: http://review.whamcloud.com/17582
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7334 lov: Cleanup lov_stripe proc files 65/20465/6
Giuseppe Di Natale [Tue, 14 Jun 2016 16:34:41 +0000 (12:34 -0400)]
LU-7334 lov: Cleanup lov_stripe proc files

Make lov_stripe* proc files read only. Writing to
these proc files no longer has any impact.

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Change-Id: I5adfbbe529208efef760df22c849e3684a34e187
Reviewed-on: http://review.whamcloud.com/20465
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-8203 tests: Wait for archive operation to be completed. 42/20442/8
Kirtankumar Krishna Shetty [Wed, 25 May 2016 11:33:48 +0000 (17:03 +0530)]
LU-8203 tests: Wait for archive operation to be completed.

As bandwith control is set to 1048576B/s in the test, so
the archive operation takes <= 40 secs to copy 39000000
bytes.

If we dont wait for the on going archive action to finish
then status will remain as STARTED and never becomes
SUCCEED as we call copytool_cleanup soon after archiving
5MB of data and the request will be stuck there for ever.

Sometimes because of previous unclean shutdown of copytool,
test_60 results in failure because of stuck request.

Test-Parameters: trivial testlist=sanity-hsm,sanity-hsm

Change-Id: I2413c32a617e43fb24e7ca6696026a3c9e1cad00
Seagate-bug-id: MRP-2586
Signed-off-by: Kirtankumar Krishna Shetty <kirtan.shetty@seagate.com>
Reviewed-on: http://review.whamcloud.com/20442
Tested-by: Jenkins
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8058 lnet: Remove old commented out code 14/20414/4
Ben Evans [Tue, 14 Jun 2016 18:15:34 +0000 (14:15 -0400)]
LU-8058 lnet: Remove old commented out code

These #if 0 blocks have been in place for years. Assume
they are not used and remove them

Signed-off-by: Ben Evans <bevans@cray.com>
Change-Id: I3840513cc68786ded878ba8be6b92f0a180507a2
Reviewed-on: http://review.whamcloud.com/20414
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8150 mdt: Track open+create as mknod 46/20246/6
Matt Ezell [Wed, 15 Jun 2016 00:51:07 +0000 (20:51 -0400)]
LU-8150 mdt: Track open+create as mknod

Regular files created with mknod are tracked, but most files are
created as an open with create intent. Track this as a mknod also.

Signed-off-by: Matt Ezell <ezellma@ornl.gov>
Change-Id: I8f6ab9d91d0b31062c7f73f8394a1b12f7963f1c
Reviewed-on: http://review.whamcloud.com/20246
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8116 build: Fix libmount configure message 55/20055/3
Christopher J. Morrone [Sat, 7 May 2016 01:53:07 +0000 (18:53 -0700)]
LU-8116 build: Fix libmount configure message

The configure messages for libmount checking were incorrectly nested resulting
in messages like this:

checking whether build with libmount... checking libmount/libmount.h usability... no
checking libmount/libmount.h presence... no
checking for libmount/libmount.h... no
no

This patch unwinds that mistake.

Change-Id: Iec716d8152880902d3e6961cd1d3b821e37c349a
Signed-off-by: Christopher J. Morrone <morrone2@llnl.gov>
Reviewed-on: http://review.whamcloud.com/20055
Tested-by: Jenkins
Reviewed-by: Minh Diep <minh.diep@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-7896: do not call lu_site_purge() for single object exceed 82/19082/9
Alex Zhuravlev [Fri, 11 Mar 2016 15:26:47 +0000 (18:26 +0300)]
LU-7896: do not call lu_site_purge() for single object exceed

first of all, this is expensive procedure including a global
mutex and per-bucket spinlocks. also, all the threads observed
exceed will be calling lu_site_purge() and essentially serialized
on that. instead we can let other threads to skip the whole
procedure.

Change-Id: Ib5d213c70b5a2f259153ab24d7c3f5a3e97239df
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-on: http://review.whamcloud.com/19082
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7664 test: set_conf_param_and_check() defect 95/17995/2
Elena Gryaznova [Thu, 14 Jan 2016 12:13:55 +0000 (14:13 +0200)]
LU-7664 test: set_conf_param_and_check() defect

set_conf_param_and_check() should wait update on facet_active_host
instead of facet_host; othewise tests failed on configuration
facet_HOST != facetfailover_HOST

Seagate-bug-id: MRP-2846
Signed-off-by: Elena Gryaznova <elena.gryaznova@seagate.com>
Reviewed-by: Sergey Cheremencev <sergey.cheremencev@seagate.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Change-Id: I974f145b3783fec1adb2fc6219ef4bd025a31811
Reviewed-on: http://review.whamcloud.com/17995
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5092 nodemap: remove nodemap_idx_action, only act on MGS 54/18554/9
Kit Westneat [Mon, 22 Feb 2016 19:27:29 +0000 (14:27 -0500)]
LU-5092 nodemap: remove nodemap_idx_action, only act on MGS

Only the MGS config needs to be modified on config changes.
The target configs will be loaded from the MGS and written
whole to disk.

Signed-off-by: Kit Westneat <kit.westneat@gmail.com>
Change-Id: I3114258d6e18d293cdf29ae47a28465f245387de
Reviewed-on: http://review.whamcloud.com/18554
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7403 obd: const correct md_set_lock_data() 72/17072/8
John L. Hammond [Thu, 16 Jun 2016 21:42:00 +0000 (17:42 -0400)]
LU-7403 obd: const correct md_set_lock_data()

Change the __u64 *cookie parameter of md_set_lock_data() to const
struct lustre_handle *lockh.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: Ie6de252a10c532ee395e407ad2aff258773478a8
Reviewed-on: http://review.whamcloud.com/17072
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8216 ldiskfs: fix journal quota files for RHEL6.8 91/20791/4
Wang Shilong [Wed, 15 Jun 2016 00:04:04 +0000 (08:04 +0800)]
LU-8216 ldiskfs: fix journal quota files for RHEL6.8

When we hit Lustre crash, e2fsck always complains of Quota
accounting mismatch, and sometimes differences are huge.

The problem is that we don't journal quota updates properly, and
with current codes quota files will be only journaled when syncing
the filesystem, which only happens by sync() call or unmount.

RHEL6.8 version of the patch http://review.whamcloud.com/20503

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Change-Id: Id5b580083197555029442338f7feaf59b1ad154c
Reviewed-on: http://review.whamcloud.com/20791
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-8220 tests: stripe file over all active OSTs 15/20515/5
Noopur Maheshwari [Tue, 31 May 2016 09:10:32 +0000 (14:40 +0530)]
LU-8220 tests: stripe file over all active OSTs

In test_iozone/parallel-scale-cifs, the iozone command creates the
temporary files under test with default stripe count=1, that is,
both the 256mb files reside on the same OST, over-utilizing the OST,
resulting in Use%=100%(No space left on device).

The fix is to create a sub-directory in the samba server mount
point with a stripe count of -1 (stripe over all available OSTs)
and then run iozone with this sub-directory path, so that all the
temporary files created within this sub-directory, during iozone,
reside on multiple OSTs and OST free space is utilized uniformly.

Since the test suite mounts lustre client on smb server, the "lfs
setstripe" command is executed on the smb server.

Test-Parameters: trivial

Seagate-bug-id: MRP-2179
Signed-off-by: Noopur Maheshwari <noopur.maheshwari@seagate.com>
Change-Id: If225b62848b5266dc51ef791ef0d9c8002f908a5
Reviewed-on: http://review.whamcloud.com/20515
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8106 lnet: Do not drop message when shutting down LNet 93/19993/2
Doug Oucharek [Wed, 2 Mar 2016 04:08:00 +0000 (12:08 +0800)]
LU-8106 lnet: Do not drop message when shutting down LNet

There is a case in lnet_parse() where we discover that LNet
is shutting down but we continue to use the NI when we drop the
message and end up calling ko2iblnd_check_send_locked() which tries to
allocate from the Tx pool which has been cleaned up already.
This triggers a NULL pointer dereference.

This fix just returns from lnet_parse() when we disover LNet is
shutting down.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Change-Id: Ia8dba848e88b02ed23e2e77adb702c7ad0e60628
Reviewed-on: http://review.whamcloud.com/19993
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7861 osp: replace the hot spinlock with atomic trackers 11/19211/5
Alex Zhuravlev [Fri, 17 Jun 2016 15:25:04 +0000 (23:25 +0800)]
LU-7861 osp: replace the hot spinlock with atomic trackers

so that background scanning doesn't race with MDS_REINT_UNLINK

Change-Id: I4006be4298ffa841ca4d131ac37c201ff8ea729f
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-on: http://review.whamcloud.com/19211
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7204 test: handle FSNAME with dashes in replay-single 85b 02/16902/4
Sundar Keshava [Wed, 21 Oct 2015 10:02:05 +0000 (15:32 +0530)]
LU-7204 test: handle FSNAME with dashes in replay-single 85b

If FSNAME contains a dash, test_85b incorrectly parses lctl dl
output. Fix that.
Also changed the checking of before recovery count value
by using numeric comparison instead of string comparison.
Used tabs in place of spaces.

Test-Parameters: trivial testlist=replay-single envdefinitions=ONLY=85b
Seagate-bug-id: MRP-2792
Signed-off-by: HemaHarish <hema.yarramilli@seagate.com>
Change-Id: I392921b837dee573a704a3fec4b35c7bb79136bc
Reviewed-on: http://review.whamcloud.com/16902
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7301 test: do cleanup only if required 87/16887/2
Chennaiah Palla [Tue, 20 Oct 2015 05:58:21 +0000 (11:28 +0530)]
LU-7301 test: do cleanup only if required

change check_and_cleanup_lustre() to do cleanup only if required

Seagate-bug-id: MRP-1257
Signed-off-by: Chennaiah Palla <chennaiah.palla@seagate.com>
Change-Id: I22f3b2a448c78b0468c5d802a370a51aab3c9f8d
Reviewed-on: http://review.whamcloud.com/16887
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-8040 mgc: Apply changelog defaults values in mdd_init0() 54/19854/6
Artem Blagodarenko [Thu, 28 Apr 2016 14:30:53 +0000 (17:30 +0300)]
LU-8040 mgc: Apply changelog defaults values in  mdd_init0()

lctl set_param -P command stores options to params file. This options
are applied in server_start_targets() during target mount. Changelog
apply default options during initialization. So it reset options
applied by "lctl set_param -P".

This patch moves changelogs default value appying before params
processing. So new parameters aplied after default.

Signed-off-by: Artem Blagodarenko <artem.blagodarenko@seagate.com>
Change-Id: Ibb1a8d512844d4fcb66c051441c1864f994d4ded
Reviewed-on: http://review.whamcloud.com/19854
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoNew tag 2.8.55 2.8.55 v2_8_55 v2_8_55_0
Oleg Drokin [Wed, 22 Jun 2016 01:07:49 +0000 (21:07 -0400)]
New tag 2.8.55

Change-Id: Ie0b88ee537b2f76d59a49e3512c834f5314b0eae
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7860 ldlm: revert part of commit 657bbc49 09/20509/4
Bobi Jam [Tue, 31 May 2016 04:18:55 +0000 (12:18 +0800)]
LU-7860 ldlm: revert part of commit 657bbc49

During ldlm_lock_cancel()->ldlm_cancel_callback(), the lock could
possibly be added back to waiting list with no resource lock holding.

Put back the second checking and removing from the waiting list.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Change-Id: I8841422d6e2f6bf92efa24d542583936123ead66
Reviewed-on: http://review.whamcloud.com/20509
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5564 mdt: skip permission check for close 34/15534/8
Hongchao Zhang [Mon, 30 May 2016 16:10:37 +0000 (00:10 +0800)]
LU-5564 mdt: skip permission check for close

When closing a file normally, skip the permission check
for open handle gives us permission.

Change-Id: I74271eb83cdd807940cb6ba37ede05fa9f9751ce
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/15534
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5969 procfs: restore missing newline for version param 09/20809/2
John L. Hammond [Wed, 15 Jun 2016 15:34:50 +0000 (10:34 -0500)]
LU-5969 procfs: restore missing newline for version param

In obd_proc_version_seq_show() restore the missing newline at the end
of the version param value.

Test-Parameters: trivial

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I7f8eecc418ceb3191650d7dfba8d1e2545af631b
Reviewed-on: http://review.whamcloud.com/20809
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Tested-by: Jenkins
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5953 build: use installed OFED by default with dpkg 23/20523/3
Minh Diep [Wed, 12 Nov 2014 14:23:06 +0000 (15:23 +0100)]
LU-5953 build: use installed OFED by default with dpkg

Add support for dpkg based systems (Ubuntu) when detecting installed
OFED drivers.

Lustre-change: http://review.whamcloud.com/16455

Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Minh Diep <minh.diep@intel.com>
Change-Id: Ifb0b1c41e2148a59e894fbf075ae9db5b8fe5297
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/20523
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
3 years agoLU-7004 utils: remove "lctl conf_param" deprecation 73/20573/2
Andreas Dilger [Thu, 2 Jun 2016 01:02:09 +0000 (19:02 -0600)]
LU-7004 utils: remove "lctl conf_param" deprecation

The "lctl set_param -P" functionality was intended to replace
"lctl conf_param" with a more uniform interface that matches
the existing "lctl set_param" and "lctl get_param" usage.
However, there are still unresolved issues that need to be
addressed and a longer transition period needed before the
old functionality can be removed.

Remove the deprecation warning for now, rather than bumping it
to some later release.  It can be re-added when "set_param -P"
has been fixed.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: If9a316bda4bf8d889c4072740f0879d9d43ebbe5
Reviewed-on: http://review.whamcloud.com/20573
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-6971 cleanup: not support remote client anymore 89/19789/13
Fan Yong [Tue, 10 May 2016 23:09:18 +0000 (07:09 +0800)]
LU-6971 cleanup: not support remote client anymore

There are several obsolete sub commands for lfs to work with
remote client. We do not support that anymore, and should be
deleted along with any kernel code related to remote client.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Change-Id: I06f4348b2b3def5ac4aa75676b1b5b7ccc4ab10e
Reviewed-on: http://review.whamcloud.com/19789
Tested-by: Jenkins
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8277 scripts: add missing commas in checkpatch.pl 86/20786/2
John L. Hammond [Tue, 14 Jun 2016 18:49:10 +0000 (13:49 -0500)]
LU-8277 scripts: add missing commas in checkpatch.pl

In checkpatch.pl add some missing commas to the table of deprecated
symbols.

Test-Parameters: trivial
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I409d930db5863b983370c3286d75b357bf4090a1
Reviewed-on: http://review.whamcloud.com/20786
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Patrick Farrell <paf@cray.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-2766 llite: don't ignore layout for group lock request 28/6828/12
Jinshan Xiong [Wed, 8 Jun 2016 03:59:32 +0000 (20:59 -0700)]
LU-2766 llite: don't ignore layout for group lock request

ignore_layout can be set for operations that layout won't be changed,
typically page operations. Ignoring layout change in group lock
request will confuse layout change code at LOV layer and hit
assertion.

Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Change-Id: I0f628e81d7f61a9b00ab2941ad3bcde4b32ecfe2
Reviewed-on: http://review.whamcloud.com/6828
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7893 osd-zfs: fix error handling in osd_mount() 71/15671/14
Alex Zhuravlev [Tue, 21 Jul 2015 18:20:07 +0000 (21:20 +0300)]
LU-7893 osd-zfs: fix error handling in osd_mount()

Do not try to release objectset if we failed to open it.

Change-Id: I85926d0b0a7fb5faf832a3907eac2324e7e6c07f
Signed-off-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-on: http://review.whamcloud.com/15671
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
3 years agoLU-3289 gss: Cleanup gss code 27/20727/4
Nathaniel Clark [Fri, 10 Jun 2016 18:44:50 +0000 (14:44 -0400)]
LU-3289 gss: Cleanup gss code

Address some lingering style and code issues that were commented on
but not fixed.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Change-Id: I2396bf3a6a6e3621aa37fd5592eb9eeaeedb06e7
Reviewed-on: http://review.whamcloud.com/20727
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-7434 ptlrpc: lost bulk leads to a hang 53/19953/4
Vitaly Fertman [Tue, 1 Mar 2016 23:46:31 +0000 (02:46 +0300)]
LU-7434 ptlrpc: lost bulk leads to a hang

This is a combination of two commits. The original commit from:
http://review.whamcloud.com/17221
and a fix to that commit from:
http://review.whamcloud.com/19758

Description of the original patch:
The reverse order of request_out_callback() and reply_in_callback()
puts the RPC into UNREGISTERING state, which is waiting for RPC &
bulk md unlink, whereas only RPC md unlink has been called so far.
If bulk is lost, even expired_set does not check for UNREGISTERING
state.

The same for write if server returns an error.

This phase is ambiguous, split to UNREG_RPC and UNREG_BULK.

The fix to the original commit was originally pushed against LU-8062.
That fix is described thusly:
LU-8062 test: fix fail_val in recovery-small/115b

The fail_loc OBD_FAIL_OST_ENOSPC is caught in 2 places:
1. ofd_statfs() - where it is checked against the fail_val
and if fail_val matches the OST ID it is caught here
itself and hence test fails.
2. tgt_brw_write() - the actual place where the fail_loc should
be caught.

The patch makes the fail_loc to be caught at the appropriate place
by setting the fail_val to $OSTCOUNT. So even if fail_loc is set
in the statfs part it is not caught there and therefore caught in
tgt_brw_write().

Please note the author of the original patch was Vitaly Fertman
<vitaly.fertman@seagate.com>, and the author of the test fix was
Bhagyesh Dudhediya <bhagyesh.dudhediya@seagate.com>

Test-Parameters: testlist=recovery-small,recovery-small,recovery-small,recovery-small,recovery-small,recovery-small
Signed-off-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Signed-off-by: Bhagyesh Dudhediya <bhagyesh.dudhediya@seagate.com>
Signed-off-by: Chris Horn <hornc@cray.com>
Seagate-bug-id:  MRP-2953, MRP-3206, MRP-3150
Reviewed-by: Andriy Skulysh <andriy.skulysh@seagate.com>
Reviewed-by: Alexey Leonidovich Lyashkov <alexey.lyashkov@seagate.com>
Tested-by: Elena V. Gryaznova <elena.gryaznova@seagate.com>
Change-Id: I17319d40881c41f247c102aafc3a1b0db82d0b4a
Reviewed-on: http://review.whamcloud.com/19953
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Ann Koehler <amk@cray.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7846 tests: test for nodemap fileset in sanity-sec 95/19895/11
Sebastien Buisson [Sat, 30 Apr 2016 16:27:57 +0000 (18:27 +0200)]
LU-7846 tests: test for nodemap fileset in sanity-sec

Add new tests in sanity-sec.sh to test for fileset in nodemap.

Test-Parameters: testlist=sanity-sec
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I7903d0282d15df84e1f48028d3f44094cac20e98
Reviewed-on: http://review.whamcloud.com/19895
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Kit Westneat <kit.westneat@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7813 utils: improve lfs setstripe pool error message 65/18965/3
Andreas Dilger [Wed, 16 Mar 2016 18:48:25 +0000 (12:48 -0600)]
LU-7813 utils: improve lfs setstripe pool error message

When a specified OST is not in the requested pool, improve the error
message printed to the user.  Currently it only prints:

  $ lfs setstripe -p audio -i 1 /myth/foo
  error: setstripe: create file '/myth/foo' failed

but this doesn't indicate why it failed.  Add in more information:

  error: setstripe: create file '/myth/foo' failed: OST not in pool?
  error: setstripe: create file '/myth/foo' failed: permission denied

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Change-Id: I409739b1e3dad633f0b0a4c4f94a746c0b6485bd
Reviewed-on: http://review.whamcloud.com/18965
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7445 test: combine dependent sanity 51b and 51ba tests 39/17239/2
Elena Gryaznova [Wed, 18 Nov 2015 09:41:42 +0000 (11:41 +0200)]
LU-7445 test: combine dependent sanity 51b and 51ba tests

test_51ba() depends on test_51b() and skipped if run separately

Patch combines test_51b() and test_51ba() into test_51b().
$tdir is used for test dir name.

Test-Parameters: envdefinitions=ONLY=51b testlist=sanity
Seagate-bug-id: MRP-2290
Signed-off-by: Elena Gryaznova <elena.gryaznova@seagate.com>
Reviewed-by: Vladimir Saveliev <vladimir.saveliev@seagate.com>
Reviewed-by: Vitaly Fertman <vitaly.fertman@seagate.com>
Change-Id: I6ee019a03d398e36c7007973614375c9ca22e349
Reviewed-on: http://review.whamcloud.com/17239
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-4048 build: fix 'control flow' errors 24/7824/12
Sebastien Buisson [Wed, 2 Oct 2013 12:26:58 +0000 (14:26 +0200)]
LU-4048 build: fix 'control flow' errors

Fix "control flow" issues found by Coverity version 6.6.1:
Logically dead code (DEADCODE)
Execution cannot reach this statement.

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Change-Id: I0be1b0f69b16a988e361185f6c4ef2d9dcee8d31
Reviewed-on: http://review.whamcloud.com/7824
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7934 osp: fix tr->otr_next_id overflow 90/19190/3
Alexander Boyko [Tue, 29 Mar 2016 11:39:47 +0000 (14:39 +0300)]
LU-7934 osp: fix tr->otr_next_id overflow

The tracker next_id and current_id u32 type was based on
max llog records. But llog use cyclic store for records, so
llog could store infinite number of records and limited by
max number at moument of time. The u32 type could be
overflowed easy if a server isn`t rebooted.
osp_sync_id_get()) snx11126-OST0045-osc-MDT0000: next 0,
last synced 4294967205
This fix changes type u32 to u64 for *id. Now, we store only
low part current_id to llog record header id. And restore the
full u64 from record header later. It is possible because
llog catalog can store 64768^2 and it is less than u32 max value.

The patch adds test to check u32 overflow for otr_next_id field
of osp_id_tracker.

Recreate the next assertion
LustreError: 185667:0:(osp_sync.c:1544:osp_sync_id_get())
snx11126-OST0045-osc-MDT0000: next 0, last synced 4294967205
LustreError: 231396:0:(osp_sync.c:1545:osp_sync_id_get()) LBUG

Seagate-bug-id: MRP-3367
Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Change-Id: I89d70ecb068f8d0b5a1e1ac35b85a4b6e53211e5
Reviewed-on: http://review.whamcloud.com/19190
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andrew Perepechko <andrew.perepechko@seagate.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7536 mdt: handling NULL dereference in mdt_reconstruct 95/20395/5
Jadhav Vikram [Tue, 26 Apr 2016 04:15:58 +0000 (09:45 +0530)]
LU-7536 mdt: handling NULL dereference in mdt_reconstruct

mdt_reconstruct function corresponding to op-code
REINT_MIGRATE is not present, so as per request format
used in mdt_reint adding mdt reconstruct functions.
Also added assertion to check max opcodes and undefined
reconstruct function. Also updated opcode REINT_RMENTRY
and REINT_MIGRADE at missing places.

Seagate-bug-id: MRP-3205
Signed-off-by: Jadhav Vikram <jadhav.vikram@seagate.com>
Change-Id: I489ee3dfa5972c14f37aed5307103cf329d802f7
Reviewed-on: http://review.whamcloud.com/20395
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Gu Zheng <gzheng@ddn.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8279 scrub: fix inode reference leak 92/20792/3
Fan Yong [Tue, 10 May 2016 23:06:57 +0000 (07:06 +0800)]
LU-8279 scrub: fix inode reference leak

There was logic issue in osd_fid_lookup() to handle remote directory
under the case of MDT file-level backup and restore: the logic wanted
to trigger OI scrub when found the OI mapping for the remote directory
object invalid, but forgot to assign the valid inode to the object as
to such inode's reference cannot for released properly.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Change-Id: Ib2c6dd7a3b43bd75b5e5aaadad91a1a72ef3d54e
Reviewed-on: http://review.whamcloud.com/20792
Tested-by: Jenkins
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-4781 utils: handle EEXIST in lustre_rsync 49/20649/2
John L. Hammond [Mon, 6 Jun 2016 20:06:59 +0000 (15:06 -0500)]
LU-4781 utils: handle EEXIST in lustre_rsync

In lustre_rsync if the file to be created in the target already exist
then handle this rather than returning an error.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I8c04c80cf8618b3681be12d098be0f07a305df30
Reviewed-on: http://review.whamcloud.com/20649
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Li Xi <lixi@ddn.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-8232 obdclass: remove dead code 87/20587/3
Henri Doreau [Thu, 2 Jun 2016 11:47:31 +0000 (13:47 +0200)]
LU-8232 obdclass: remove dead code

No need to check for rc since it is never assigned after declaration
and sub-calls do not return error codes.

Test-Parameters: trivial

Change-Id: I040a45e8a779b11840c8c883fd4d5d87ee7f0fed
Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-on: http://review.whamcloud.com/20587
Reviewed-by: Ben Evans <bevans@cray.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8227 kernel: kernel update RHEL6.8 [2.6.32-642.1.1.el6] 42/20542/2
Bob Glossman [Wed, 1 Jun 2016 13:26:07 +0000 (06:26 -0700)]
LU-8227 kernel: kernel update RHEL6.8 [2.6.32-642.1.1.el6]

Update RHEL6.8 kernel to 2.6.32-642.1.1.el6

Test-Parameters: clientdistro=el6.8 mdsdistro=el6.8 ossdistro=el6.8 \
  mdsfilesystemtype=ldiskfs mdtfilesystemtype=ldiskfs \
  ostfilesystemtype=ldiskfs testgroup=review-ldiskfs

Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Change-Id: I33789db4827b36a25332e5d7e85729ac036d0a4b
Reviewed-on: http://review.whamcloud.com/20542
Tested-by: Jenkins
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Reviewed-by: Minh Diep <minh.diep@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7747 lfs: fix help message for migrate 41/20541/4
Dmitry Eremin [Wed, 1 Jun 2016 12:37:42 +0000 (15:37 +0300)]
LU-7747 lfs: fix help message for migrate

Combine two different help messages for migrate in one.

Test-Parameters: trivial

Change-Id: I2b44006dbd9114155cf7a1f65e68d3796f857ee3
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/20541
Tested-by: Jenkins
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-8196 obd: force very large allocations to use vmalloc 20/20420/3
Bob Glossman [Tue, 24 May 2016 18:16:35 +0000 (11:16 -0700)]
LU-8196 obd: force very large allocations to use vmalloc

In cases where the requsted allocation size is very large
use OBD_VMALLOC().  This avoids warnings from el7 and newer
kernels due to very large kmalloc()s.

Signed-off-by: Bob Glossman <bob.glossman@intel.com>
Change-Id: I87e95b1f8e5e50bc35d713a1775313c10f0368a9
Reviewed-on: http://review.whamcloud.com/20420
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
Tested-by: Jenkins
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8058 utils: Remove old commented out code 15/20415/3
Ben Evans [Tue, 24 May 2016 17:15:39 +0000 (12:15 -0500)]
LU-8058 utils: Remove old commented out code

These #if 0 blocks have been in place for years. Assume
they are not used and remove them

remove empty function handle_spkm3_upcall

Signed-off-by: Ben Evans <bevans@cray.com>
Change-Id: Ia660048adae000a506836fe226c475affd0149b8
Reviewed-on: http://review.whamcloud.com/20415
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Sebastien Buisson <sbuisson@ddn.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8182 mdt: check connection data properly 91/20391/2
Fan Yong [Tue, 26 Apr 2016 21:47:15 +0000 (05:47 +0800)]
LU-8182 mdt: check connection data properly

For mdt_obd_connect() case, the parameter @data should never be
NULL, so drop the redundant check of "data != NULL", replace it
with "LASSERT(data != NULL);"

Signed-off-by: Fan Yong <fan.yong@intel.com>
Change-Id: Ia6754752527e69c89e7a40d3d012232eaba94d3e
Reviewed-on: http://review.whamcloud.com/20391
Tested-by: Jenkins
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-8178 lproc: fix negative recovery_duration 81/20381/3
Sergey Cheremencev [Thu, 14 Jan 2016 19:32:02 +0000 (22:32 +0300)]
LU-8178 lproc: fix negative recovery_duration

There is a window in target_recovery_thread where
obd_recovery_end is not set despite of
obd_recovering becomes 0. In such case
recovery_duration shows difference between 0 and
obd_recovery_start like below:
recovery_duration: 18446744072323902150.

Change-Id: Id385156585c99d12726e89980b55c588e0bf3ceb
Signed-off-by: Sergey Cheremencev <sergey.cheremencev@seagate.com>
Seagate-bug-id: MRP-1519
Reviewed-by: Alexander Nikolaevich Boyko <alexander.boyko@seagate.com>
Reviewed-by: Artem Blagodarenko <artem.blagodarenko@seagate.com>
Tested-by: Parinay Vijayprakash Kondekar <parinay.kondekar@seagate.com>
Reviewed-on: http://review.whamcloud.com/20381
Tested-by: Jenkins
Reviewed-by: Alexander Boyko <alexander.boyko@seagate.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7334 lprocfs: Allow a new line before null terminator 53/20353/4
Giuseppe Di Natale [Fri, 20 May 2016 15:01:35 +0000 (08:01 -0700)]
LU-7334 lprocfs: Allow a new line before null terminator

Kernel string parsing functions support a single new line
before the null terminator of a string. Our numeric string
parsing should do the same. This allows strings to be
echo'ed directly into proc files.

Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Change-Id: Ia9d36b4f4f6849547391115d31be34a14215fc2a
Reviewed-on: http://review.whamcloud.com/20353
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Reviewed-by: Frank Zago <fzago@cray.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-8171 hsm: stack overrun in hai_dump_data_field 38/20338/4
Frank Zago [Thu, 19 May 2016 21:18:18 +0000 (17:18 -0400)]
LU-8171 hsm: stack overrun in hai_dump_data_field

With the stock 3.10 kernel, hai_dump_data_field will do a stack buffer
overrun when cat'ing /proc/fs/lustre/.../hsm/actions if an action has
some data in it.

hai_dump_data_field uses snprintf. But there is no check for
truncation, and the value returned by snprintf is used as-is.  The
coordinator code calls hai_dump_data_field with 12 bytes in the
buffer. The 6th byte of data is printed incompletely to make room for
the terminating NUL. However snprintf still returns 2, so when
hai_dump_data_field writes the final NUL, it does it outside the
reserved buffer, in the 13th byte of the buffer. This stack buffer
overrun hangs my VM.

This doesn't happen on CentOS 6.

Fix by checking that there is enough room for the next 2 characters
plus the NUL terminator. Don't print half bytes. Change the format to
02X instead of .2X, which makes more sense.

Signed-off-by: frank zago <fzago@cray.com>
Change-Id: Icb6e658fc63f441b7a698f595ac71a1236ff3588
Reviewed-on: http://review.whamcloud.com/20338
Tested-by: Jenkins
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Jean-Baptiste Riaux <riaux.jb@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8163 hsm: user_request_mask can't be unset in test 24c 20/20320/4
Frank Zago [Wed, 18 May 2016 21:51:01 +0000 (17:51 -0400)]
LU-8163 hsm: user_request_mask can't be unset in test 24c

The following lines in sanity-hsm.sh test_24c

  set_hsm_param user_request_mask ""
  set_hsm_param group_request_mask ""
  set_hsm_param other_request_mask ""

generate the following errors in the test, which isn't caught:

  error: set_param: setting mdt.lustre-MDT0000.hsm.user_request_mask:
                    no value

This is because "lct set_param" cannot accept an empty value:

  $ lctl set_param -n mdt.lustre-MDT0000.hsm.user_request_mask=""
  error: set_param: setting mdt.lustre-MDT0000.hsm.user_request_mask:
                    no value

Since the test checked earlier that [user|group|other]_request_mask
was RESTORE, we don't actually need to change their values to
nothing. They just have to be not ARCHIVE.

Test-Parameters: trivial testlist=sanity-hsm,sanity-hsm

Signed-off-by: frank zago <fzago@cray.com>
Change-Id: I00622d93157e6577651996bf482ec8f710f86c9e
Reviewed-on: http://review.whamcloud.com/20320
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8138 utils: misc fixes in wirecheck 89/20189/3
Henri Doreau [Fri, 13 May 2016 11:19:46 +0000 (13:19 +0200)]
LU-8138 utils: misc fixes in wirecheck

Include required headers that were missing.
Fix structure field name that has been embedded into an union.

Signed-off-by: Henri Doreau <henri.doreau@cea.fr>
Change-Id: If87d673ffbe9ccdd965c77161dfc69ed9e983fc3
Reviewed-on: http://review.whamcloud.com/20189
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Yang Sheng <yang.sheng@intel.com>
3 years agoLU-8056 libcfs: Support for linux 4.2 kernels 09/20009/2
Dmitry Eremin [Thu, 5 May 2016 19:08:05 +0000 (22:08 +0300)]
LU-8056 libcfs: Support for linux 4.2 kernels

In kernel version 4.2 commit df6b35f409af0a8ff1ef62f552b8402f3fef8665
header file i387.h was renamed to fpu/api.h

Change-Id: Id4f5f6e73f3c2aeac67b5c87b9c1d310a0a50a50
Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-on: http://review.whamcloud.com/20009
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-8102 ldlm: Correlate ptlrpc req w/AST error 83/19983/2
Chris Horn [Wed, 4 May 2016 19:13:28 +0000 (14:13 -0500)]
LU-8102 ldlm: Correlate ptlrpc req w/AST error

Enhance AST error and debug messages with the pointer and xid of the
corresponding ptlrpc request.

Signed-off-by: Chris Horn <hornc@cray.com>
Change-Id: I47834d092df0ac8638b03aa6447b3bd772ee5e0b
Reviewed-on: http://review.whamcloud.com/19983
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-5560 obd: reserve connection flag OBD_CONNECT2_FILE_SECCTX 70/19970/8
John L. Hammond [Thu, 11 Feb 2016 19:22:02 +0000 (13:22 -0600)]
LU-5560 obd: reserve connection flag OBD_CONNECT2_FILE_SECCTX

The connection flag OBD_CONNECT2_FILE_SECCTX will be set (in
ocd_connect_flags2) if an MDT supports setting the file security
context at create time.

This patch is ported from the following one:
Lustre-commit: f0f79ede2105dd40665bd8b60c2c5f274290ab57
Lustre-change: http://review.whamcloud.com/18420

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: LDEV-236
Change-Id: Ib79ef50bbcd68baa624ece109fa204dfd7f8b128
Reviewed-on: http://review.whamcloud.com/19970
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
3 years agoLU-8036 utils: remove ARRAY_SIZE() define from lustreapi.h 18/19818/4
John L. Hammond [Wed, 27 Apr 2016 16:15:17 +0000 (11:15 -0500)]
LU-8036 utils: remove ARRAY_SIZE() define from lustreapi.h

Remove the definition of ARRAY_SIZE() from lustreapi.h.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Change-Id: I57b1893e7ecd57d841f5b9348a8d5285cbc02124
Reviewed-on: http://review.whamcloud.com/19818
Tested-by: Jenkins
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
3 years agoLU-7920 hsm: Account for decreasing max request count 82/19382/3
Nathaniel Clark [Thu, 7 Apr 2016 11:58:37 +0000 (07:58 -0400)]
LU-7920 hsm: Account for decreasing max request count

If HSM is active and the max request count is decreased, account for
that when checking to see if more requests should be started.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Change-Id: I4dcf9ea192f9b354a9933e08d2ced9ced7b3bc7c
Reviewed-on: http://review.whamcloud.com/19382
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Frank Zago <fzago@cray.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
3 years agoLU-7993 test: Fix division by 0 in info prints 59/19359/2
Nathaniel Clark [Wed, 6 Apr 2016 16:09:55 +0000 (12:09 -0400)]
LU-7993 test: Fix division by 0 in info prints

Some of the information only prints in sanity/116a don't account for a
0 in the minimum number and thus divide by zero, but only print if MIN
is above zero, so this just doesn't do the calculation if it isn't
needed.

Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Change-Id: I7003739f6b518f981a1058d41b19bca258e1d11e
Reviewed-on: http://review.whamcloud.com/19359
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
3 years agoLU-7776 tests: lnet-selftest.sh local_mode failure 08/19308/2
Abrarahmed Momin [Sat, 2 Apr 2016 03:25:37 +0000 (08:55 +0530)]
LU-7776 tests: lnet-selftest.sh local_mode failure

Update lnet-selftest to call stopall for local_mode
and cleanupall otherwise.

Signed-off-by: Abrarahmed Momin <abrar.habib@seagate.com>
Change-Id: I5dff3df8b45afc4a582556f7dd6bc92409efd380
Reviewed-on: http://review.whamcloud.com/19308
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
3 years agoLU-7955 gnilnd: Add ability to set bte_get/put_dlvr_mode 02/19202/4
James Shimek [Mon, 14 Mar 2016 15:17:43 +0000 (15:17 +0000)]
LU-7955 gnilnd: Add ability to set bte_get/put_dlvr_mode

Currently the bte_dlvr_mode applies to all BTE transactions
initiated on the node. Based on testing we would like to be able to
set the mode for BTE_GET and BTE_PUT independently.

Changes
1. Add bte_get_dlvr_mode
2. Add bte_put_dlvr_mode
3. Remove old bte_dlvr_mode parameter
4. Set default for both new modes to be performance.

Signed-off-by: Chris Horn <hornc@cray.com>
Change-Id: Ifa7388b2a5b3d2f17b96f68890d3d98f082e3de6
Reviewed-on: http://review.whamcloud.com/19202
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Tested-by: Jenkins
Tested-by: Maloo <hpdd-maloo@intel.com>
Reviewed-by: Chuck Fossen <chuckf@cray.com>
Reviewed-by: James Shimek <jshimek@cray.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>