top_distdir="$(top_distdir)" distdir="$(distdir)" \
module-dist-hook
-EXTRA_DIST = @PACKAGE_TARNAME@.spec \
- build/Makefile \
- build/Rules.in
-
-if ARCH_MIC
-EXTRA_DIST += build/gen_filelist.sh
-endif
+EXTRA_DIST = @PACKAGE_TARNAME@.spec \
+ build/Makefile \
+ build/Rules.in \
+ build/gen_filelist.sh
rpms-real: @PACKAGE_TARNAME@.spec dist Makefile
@CONFIGURE_ARGS=""; \
RPMARGS="$$RPMARGS --define \"_mandir %{_prefix}/share/man\""; \
RPMARGS="$$RPMARGS --define \"_sysconfdir %{cross_path}/etc\""; \
RPMARGS="$$RPMARGS --define \"make_args @CROSS_VARS@\""; \
- if [ -s @LINUX@/../../.ver.build ]; then \
- MPSS_VERSION=$$(sed -ne 's/DRIVERS_\(.*\)-.*/\1/p' @LINUX@/../../.ver.build); \
- if [ -n "$$MPSS_VERSION" ]; then \
- RPMARGS="$$RPMARGS --define \"cross_requires intel-mic-gpl = 2.1.$$MPSS_VERSION\""; \
- fi; \
+ if [ "@CC_TARGET_ARCH@" = "k1om-mpss-linux" ]; then \
+ RPMARGS="$$RPMARGS --define \"cross_requires mpss-bootimage\""; \
+ else \
+ RPMARGS="$$RPMARGS --define \"cross_requires intel-mic-gpl\""; \
fi; \
fi; \
if [[ "X$(BUILD_TESTS)" = Xfalse ]]; then \
NAME=$(basename "$0" .sh)
ROOT_DIR="$1"
FILELIST="$(dirname $ROOT_DIR)/$NAME.filelist"
+MIC_LIST="$(micctrl --status | grep "mic[0-9]*:" | sed -ne 's/\(mic[0-9]*\):.*$/\1/gp')"
case "$2" in
create)
EXCLUDE="\(share\|include\|src\)"
#fi
done | sort -u > $FILELIST
- mkdir -p /etc/sysconfig/mic/conf.d
- echo "Overlay $(dirname $ROOT_DIR) $FILELIST" > /etc/sysconfig/mic/conf.d/$NAME.conf
+ micctrl --overlay=filelist --source=$(dirname $ROOT_DIR) --target=$FILELIST --state=on $MIC_LIST
;;
remove)
+ micctrl --overlay=filelist --source=$(dirname $ROOT_DIR) --target=$FILELIST --state=delete $MIC_LIST
rm -f $FILELIST
- rm -f /etc/sysconfig/mic/conf.d/$NAME.conf
;;
*)
usage
CROSS_PATH=
AS_IF([test "x$cross_compiling" = xno], [AC_MSG_RESULT([no])],
[case $host_vendor in
- # The K1OM architecture is an extension of the x86 architecture.
- # So, the $host_arch is x86_64.
- k1om)
+ # The K1OM architecture is an extension of the x86 architecture
+ # and in MPSS 2.1 it's defined in $host_vendor. But in MPSS 3.x
+ # it's defined in $host_arch. So, try to support both case.
+ k1om | mpss)
AC_MSG_RESULT([Intel(R) Xeon Phi(TM)])
CC_TARGET_ARCH=`$CC -v 2>&1 | grep Target: | sed -e 's/Target: //'`
- if test $CC_TARGET_ARCH != x86_64-$host_vendor-linux ; then
+ AC_SUBST(CC_TARGET_ARCH)
+ if test \( $CC_TARGET_ARCH != x86_64-k1om-linux \
+ -a $CC_TARGET_ARCH != k1om-mpss-linux \)
+ then
AC_MSG_ERROR([Cross compiler not found in PATH.])
fi
- CROSS_VARS="ARCH=$host_vendor CROSS_COMPILE=x86_64-$host_vendor-linux-"
- CROSS_PATH=${CROSS_PATH:=/opt/intel/mic/lustre/device-k1om}
+ CROSS_VARS="ARCH=k1om CROSS_COMPILE=${CC_TARGET_ARCH}-"
+ CROSS_PATH="${CROSS_PATH:=/opt/lustre/${VERSION}/${CC_TARGET_ARCH}}"
CCAS=$CC
# need to produce special section for debuginfo extraction
LDFLAGS="${LDFLAGS} -Wl,--build-id"
EXTRA_KLDFLAGS="${EXTRA_KLDFLAGS} -Wl,--build-id"
if test x$enable_server != xno ; then
- AC_MSG_WARN([Disabling server (not supported for x86_64-$host_vendor-linux).])
+ AC_MSG_WARN([Disabling server (not supported for k1om architecture).])
enable_server='no'
fi
;;
AC_DEFUN([LB_LINUX_COMPILE_IFELSE],
[m4_ifvaln([$1], [AC_LANG_CONFTEST([$1])])dnl
rm -f build/conftest.o build/conftest.mod.c build/conftest.ko
-SUBARCH=$(echo $target_cpu | sed -e 's/powerpc64/powerpc/' -e 's/x86_64/x86/' -e 's/i.86/x86/')
+SUBARCH=$(echo $target_cpu | sed -e 's/powerpc64/powerpc/' -e 's/x86_64/x86/' -e 's/i.86/x86/' -e 's/k1om/x86/')
AS_IF([AC_TRY_COMMAND(cp conftest.c build && make -d [$2] ${LD:+"LD=$LD"} CC="$CC" -f $PWD/build/Makefile LUSTRE_LINUX_CONFIG=$LINUX_CONFIG LINUXINCLUDE="$EXTRA_LNET_INCLUDE -I$LINUX/arch/$SUBARCH/include -I$LINUX/arch/$SUBARCH/include/generated -Iinclude -I$LINUX/include -Iinclude2 -I$LINUX/include/uapi -I$LINUX/include/generated -I$LINUX/arch/$SUBARCH/include/uapi -Iarch/$SUBARCH/include/generated/uapi -I$LINUX/include/uapi -Iinclude/generated/uapi -include $CONFIG_INCLUDE" -o tmp_include_depends -o scripts -o include/config/MARKER -C $LINUX_OBJ EXTRA_CFLAGS="-Werror-implicit-function-declaration $EXTRA_KCFLAGS" $CROSS_VARS $MODULE_TARGET=$PWD/build) >/dev/null && AC_TRY_COMMAND([$3])],
[$4],
[_AC_MSG_LOG_CONFTEST
AM_CONDITIONAL(DARWIN, test x$lb_target_os = "xdarwin")
AM_CONDITIONAL(SUNOS, test x$lb_target_os = "xSunOS")
AM_CONDITIONAL(USES_DPKG, test x$uses_dpkg = "xyes")
-AM_CONDITIONAL(ARCH_x86, test x$target_cpu = "xx86_64" -o x$target_cpu = "xi686")
-AM_CONDITIONAL(ARCH_MIC, test x$target_cpu = "xx86_64" -a x$target_vendor = "xk1om")
AM_CONDITIONAL([USE_QUILT], [test x$use_quilt = xyes])
-
# Sanity check for PCLMULQDQ instruction availability
# PCLMULQDQ instruction is a new instruction available beginning with
# the all new Core processor family based on the 32nm microarchitecture
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
-timestamp='2003-10-03'
+timestamp='2011-11-11'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
me=`echo "$0" | sed -e 's,.*/,,'`
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+# Detect uclibc systems.
+
+LIBC="gnu"
+if [ -f /usr/include/bits/uClibc_config.h ]
+then
+ LIBC=uclibc
+ if [ -n `grep "#define __UCLIBC_CONFIG_VERSION__" /usr/include/bits/uClibc_config.h` ]
+ then
+ UCLIBC_SUBVER=`sed -n "/#define __UCLIBC_CONFIG_VERSION__ /s///p" /usr/include/bits/uClibc_config.h`
+ LIBC=$LIBC$UCLIBC_SUBVER
+ fi
+fi
+
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
+ | grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
fi
;;
*)
- os=netbsd
+ os=netbsd
;;
esac
# The OS release
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
+ case $UNAME_RELEASE in
+ *4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
"EV7.9 (21364A)")
UNAME_MACHINE="alphaev79" ;;
esac
+ # A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha*:OpenVMS:*:*)
- echo alpha-hp-vms
- exit 0 ;;
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
# of the specific Alpha model?
echo alpha-pc-interix
- exit 0 ;;
+ exit ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
- exit 0 ;;
+ exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
- exit 0;;
+ exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
+ exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
+ exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
- exit 0 ;;
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
+ exit ;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
else
echo pyramid-pyramid-bsd
fi
- exit 0 ;;
+ exit ;;
NILE*:*:*:dcosx)
echo pyramid-pyramid-svr4
- exit 0 ;;
+ exit ;;
DRS?6000:unix:4.0:6*)
echo sparc-icl-nx6
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
+ sparc) echo sparc-icl-nx7; exit ;;
esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
sun4H:SunOS:5.*:*)
echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
Series*|S4*)
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
+ exit ;;
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
echo sparc-sun-sunos${UNAME_RELEASE}
;;
esac
- exit 0 ;;
+ exit ;;
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
- exit 0 ;;
+ exit ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
- exit 0 ;;
+ exit ;;
Motorola:*:4.3:PL8-*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
echo powerpc-harris-powermax
- exit 0 ;;
+ exit ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
- exit 0 ;;
+ exit ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
- exit 0 ;;
+ exit ;;
m88k:*:4*:R4*)
echo m88k-motorola-sysv4
- exit 0 ;;
+ exit ;;
m88k:*:3*:R3*)
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
then
if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
else
echo i586-dg-dgux${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
echo m88k-dolphin-sysv3
- exit 0 ;;
+ exit ;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
echo m88k-motorola-sysv3
- exit 0 ;;
+ exit ;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
echo m88k-tektronix-sysv3
- exit 0 ;;
+ exit ;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
echo m68k-tektronix-bsd
- exit 0 ;;
+ exit ;;
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
+ exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
echo i386-ibm-aix
- exit 0 ;;
+ exit ;;
ia64:AIX:*:*)
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
eval $set_cc_for_build
exit(0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
- echo rs6000-ibm-aix3.2.5
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
else
echo rs6000-ibm-aix3.2
fi
- exit 0 ;;
- *:AIX:*:[45])
+ exit ;;
+ *:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
+ exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
- exit 0 ;;
+ exit ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
- exit 0 ;;
+ exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
+ exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
- exit 0 ;;
+ exit ;;
DPX/2?00:B.O.S.:*:*)
echo m68k-bull-sysv3
- exit 0 ;;
+ exit ;;
9000/[34]??:4.3bsd:1.*:*)
echo m68k-hp-bsd
- exit 0 ;;
+ exit ;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
- exit 0 ;;
+ exit ;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
'') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
+ esac ;;
+ esac
fi
if [ "${HP_ARCH}" = "" ]; then
eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ sed 's/^ //' << EOF >$dummy.c
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
EOF
(CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
test -z "$HP_ARCH" && HP_ARCH=hppa
esac
if [ ${HP_ARCH} = "hppa2.0w" ]
then
- # avoid double evaluation of $set_cc_for_build
- test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
then
HP_ARCH="hppa2.0w"
else
fi
fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
ia64:HP-UX:*:*)
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
+ exit ;;
3050*:HI-UX:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
- exit 0 ;;
+ exit ;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
- exit 0 ;;
+ exit ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
- exit 0 ;;
+ exit ;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
- exit 0 ;;
+ exit ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
- exit 0 ;;
+ exit ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
- exit 0 ;;
+ exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
echo ${UNAME_MACHINE}-unknown-osf1mk
else
echo ${UNAME_MACHINE}-unknown-osf1
fi
- exit 0 ;;
+ exit ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
- exit 0 ;;
+ exit ;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
CRAY*Y-MP:*:*:*)
echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*T3E:*:*:*)
echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
CRAY*SV1:*:*:*)
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ exit ;;
*:UNICOS/mp:*:*)
- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
sparc*:BSD/OS:*:*)
echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- # GNU/FreeBSD systems have a "k" prefix to indicate we are using
- # FreeBSD's kernel, but not the complete OS.
- case ${LIBC} in gnu) kernel_only='k' ;; esac
- echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
- exit 0 ;;
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case ${UNAME_PROCESSOR} in
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
+ exit ;;
+ *:MINGW*:*)
echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
+ exit ;;
+ i*:MSYS*:*)
+ echo ${UNAME_MACHINE}-pc-msys
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
i*:PW*:*)
echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:[34]*)
- echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
- exit 0 ;;
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
[345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
echo i${UNAME_MACHINE}-pc-mks
- exit 0 ;;
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
# UNAME_MACHINE based on the output of uname instead of i386?
echo i586-pc-interix
- exit 0 ;;
+ exit ;;
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
- exit 0 ;;
+ exit ;;
prep*:SunOS:5.*:*)
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
+ exit ;;
*:GNU:*:*)
+ # the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="gnulibc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
+ echo cris-axis-linux-${LIBC}
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-${LIBC}
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-${LIBC}
+ exit ;;
+ hexagon:Linux:*:*)
+ echo hexagon-unknown-linux-${LIBC}
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
- ;;
- mips64:Linux:*:*)
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#undef CPU
- #undef mips64
- #undef mips64el
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
+ CPU=${UNAME_MACHINE}el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
+ CPU=${UNAME_MACHINE}
#else
CPU=
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-${LIBC}
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-${LIBC}
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-${LIBC}
+ exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
+ PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+ PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+ *) echo hppa-unknown-linux-${LIBC} ;;
esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-${LIBC}
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-${LIBC}
+ exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
+ exit ;;
sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ exit ;;
+ x86_64:Linux:*:* | [lk]1om:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
echo i386-sequent-sysv4
- exit 0 ;;
+ exit ;;
i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
+ # Use sysv4.2uw... so that sysv4* matches it.
echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
+ exit ;;
i*86:XTS-300:*:STOP)
echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
+ exit ;;
i*86:atheos:*:*)
echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
i*86:*DOS:*:*)
echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
+ exit ;;
i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
else
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
- exit 0 ;;
- i*86:*:5:[78]*)
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
+ exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
else
echo ${UNAME_MACHINE}-pc-sysv32
fi
- exit 0 ;;
+ exit ;;
pc:*:*:*)
# Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
Intel:Mach:3*:*)
echo i386-pc-mach3
- exit 0 ;;
+ exit ;;
paragon:*:*:*)
echo i860-intel-osf1
- exit 0 ;;
+ exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
fi
- exit 0 ;;
+ exit ;;
mini*:CTIX:SYS*5:*)
# "miniframe"
echo m68010-convergent-sysv
- exit 0 ;;
+ exit ;;
mc68k:UNIX:SYSTEM5:3.51m)
echo m68k-convergent-sysv
- exit 0 ;;
+ exit ;;
M680?0:D-NIX:5.3:*)
echo m68k-diab-dnix
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
- exit 0 ;;
+ exit ;;
TSUNAMI:LynxOS:2.*:*)
echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
rs6000:LynxOS:2.*:*)
echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SM[BE]S:UNIX_SV:*:*)
echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
- exit 0 ;;
+ exit ;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
else
echo ns32k-sni-sysv
fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes <hewes@openmarket.com>.
# How about differentiating between stratus architectures? -djm
echo hppa1.1-stratus-sysv4
- exit 0 ;;
+ exit ;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
echo i860-stratus-sysv4
- exit 0 ;;
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
echo hppa1.1-stratus-vos
- exit 0 ;;
+ exit ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
- exit 0 ;;
+ exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
+ echo mips-nec-sysv${UNAME_RELEASE}
else
- echo mips-unknown-sysv${UNAME_RELEASE}
+ echo mips-unknown-sysv${UNAME_RELEASE}
fi
- exit 0 ;;
+ exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
echo powerpc-be-beos
- exit 0 ;;
+ exit ;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
echo powerpc-apple-beos
- exit 0 ;;
+ exit ;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
echo i586-pc-beos
- exit 0 ;;
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
SX-4:SUPER-UX:*:*)
echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-5:SUPER-UX:*:*)
echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
SX-6:SUPER-UX:*:*)
echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
Power*:Rhapsody:*:*)
echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Rhapsody:*:*)
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Darwin:*:*)
- case `uname -p` in
- *86) UNAME_PROCESSOR=i686 ;;
- powerpc) UNAME_PROCESSOR=powerpc ;;
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = "x86"; then
UNAME_MACHINE=pc
fi
echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
- exit 0 ;;
- NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
- exit 0 ;;
+ exit ;;
BS2000:POSIX*:*:*)
echo bs2000-siemens-sysv
- exit 0 ;;
+ exit ;;
DS/*:UNIX_System_V:*:*)
echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
+ exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
UNAME_MACHINE="$cputype"
fi
echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
+ exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
- exit 0 ;;
+ exit ;;
*:TENEX:*:*)
echo pdp10-unknown-tenex
- exit 0 ;;
+ exit ;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
echo pdp10-dec-tops20
- exit 0 ;;
+ exit ;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
echo pdp10-xkl-tops20
- exit 0 ;;
+ exit ;;
*:TOPS-20:*:*)
echo pdp10-unknown-tops20
- exit 0 ;;
+ exit ;;
*:ITS:*:*)
echo pdp10-unknown-its
- exit 0 ;;
+ exit ;;
SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit 0 ;;
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#include <sys/param.h>
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
- "4"
+ "4"
#else
- ""
+ ""
#endif
- ); exit (0);
+ ); exit (0);
#endif
#endif
#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
+ printf ("arm-acorn-riscix\n"); exit (0);
#endif
#if defined (hp300) && !defined (hpux)
}
EOF
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
# Convex versions that predate uname can use getsysinfo(1)
case `getsysinfo -f cpu_type` in
c1*)
echo c1-convex-bsd
- exit 0 ;;
+ exit ;;
c2*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
- exit 0 ;;
+ exit ;;
c34*)
echo c34-convex-bsd
- exit 0 ;;
+ exit ;;
c38*)
echo c38-convex-bsd
- exit 0 ;;
+ exit ;;
c4*)
echo c4-convex-bsd
- exit 0 ;;
+ exit ;;
esac
fi
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from
- ftp://ftp.gnu.org/pub/gnu/config/
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
If the version you run ($0) is already up to date, please
send the following data and any information you think might be
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
-timestamp='2003-08-18'
+timestamp='2011-11-11'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+
# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
+# diff and a properly formatted GNU ChangeLog entry.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# Otherwise, we print the canonical config type on stdout and succeed.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
# that are meaningful with *any* GNU software.
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
+ echo "$timestamp" ; exit ;;
--version | -v )
- echo "$version" ; exit 0 ;;
+ echo "$version" ; exit ;;
--help | --h* | -h )
- echo "$usage"; exit 0 ;;
+ echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
*local*)
# First pass through any local machine types.
echo $1
- exit 0;;
+ exit ;;
* )
break ;;
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
+ -apple | -axis | -knuth | -cray | -microblaze)
os=
basic_machine=$1
;;
+ -bluegene*)
+ os=-cnk
+ ;;
-sim | -cisco | -oki | -wec | -winbond)
os=
basic_machine=$1
os=-chorusos
basic_machine=$1
;;
- -chorusrdb)
- os=-chorusrdb
+ -chorusrdb)
+ os=-chorusrdb
basic_machine=$1
- ;;
+ ;;
-hiux*)
os=-hiuxwe2
;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco5)
os=-sco3.2v5
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
# Don't forget version if it is 3.2v4 or newer.
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco*)
os=-sco3.2v2
basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | be32 | be64 \
+ | bfin \
| c4x | clipper \
| d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
+ | epiphany \
+ | fido | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
- | m32r | m68000 | m68k | m88k | mcore \
+ | [lk]1om \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
- | mips64vr | mips64vrel \
+ | mips64octeon | mips64octeonel \
| mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
| mips64vr4100 | mips64vr4100el \
| mips64vr4300 | mips64vr4300el \
| mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
| mn10200 | mn10300 \
+ | moxie \
+ | mt \
| msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
| ns16k | ns32k \
- | openrisc | or32 \
+ | open8 \
+ | or32 \
| pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
| pyramid \
- | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
| we32k \
- | x86 | xscale | xstormy16 | xtensa \
- | z8k)
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
basic_machine=$basic_machine-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12)
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
os=-none
;;
m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | avr-* | avr32-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
| clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
- | m32r-* \
+ | [lk]1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
+ | mips64octeon-* | mips64octeonel-* \
| mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
| mips64vr4100-* | mips64vr4100el-* \
| mips64vr4300-* | mips64vr4300el-* \
| mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
| msp430-* \
- | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
| tron-* \
- | v850-* | v850e-* | vax-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
| ymp-* \
- | z8k-*)
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
basic_machine=a29k-amd
os=-udi
;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
amd64)
basic_machine=x86_64-pc
;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
amdahl)
basic_machine=580-amdahl
os=-sysv
basic_machine=m68k-apollo
os=-bsd
;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
basic_machine=ns32k-sequent
os=-dynix
;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
c90)
basic_machine=c90-cray
os=-unicos
;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
basic_machine=j90-cray
os=-unicos
;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
crds | unos)
basic_machine=m68k-crds
;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
basic_machine=m88k-motorola
os=-sysv3
;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
basic_machine=m68k-isi
os=-sysv
;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
m88k-omron*)
basic_machine=m88k-omron
;;
basic_machine=ns32k-utek
os=-sysv
;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
mingw32)
basic_machine=i386-pc
os=-mingw32
;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
miniframe)
basic_machine=m68000-convergent
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
monitor)
basic_machine=m68k-rom68k
os=-coff
basic_machine=i386-pc
os=-msdos
;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i386-pc
+ os=-msys
+ ;;
mvs)
basic_machine=i370-ibm
os=-mvs
;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
np1)
basic_machine=np1-gould
;;
- nv1)
- basic_machine=nv1-cray
- os=-unicosmp
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
;;
nsr-tandem)
basic_machine=nsr-tandem
basic_machine=hppa1.1-oki
os=-proelf
;;
- or32 | or32-*)
+ openrisc | openrisc-*)
basic_machine=or32-unknown
- os=-coff
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
basic_machine=i860-intel
os=-osf
;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
pbd)
basic_machine=sparc-tti
;;
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
;;
;;
power) basic_machine=power-ibm
;;
- ppc) basic_machine=powerpc-unknown
+ ppc | ppcbe) basic_machine=powerpc-unknown
;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
basic_machine=i586-unknown
os=-pw32
;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
sb1el)
basic_machine=mipsisa64sb1el-unknown
;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
sei)
basic_machine=mips-sei
os=-seiux
basic_machine=sh-hitachi
os=-hms
;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
sh64)
basic_machine=sh64-unknown
;;
basic_machine=i860-stratus
os=-sysv4
;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
sun2)
basic_machine=m68000-sun
;;
basic_machine=t90-cray
os=-unicos
;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
;;
tx39)
basic_machine=mipstx39-unknown
tower | tower-32)
basic_machine=m68k-ncr
;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
udi29k)
basic_machine=a29k-amd
os=-udi
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
xps | xps100)
basic_machine=xps100-honeywell
;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ ;;
ymp)
basic_machine=ymp-cray
os=-unicos
basic_machine=z8k-unknown
os=-sim
;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
none)
basic_machine=none-none
os=-none
romp)
basic_machine=romp-ibm
;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
rs6000)
basic_machine=rs6000-ibm
;;
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
basic_machine=sparc-sun
;;
cydra)
if [ x"$os" != x"" ]
then
case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
+ # First match some system type aliases
+ # that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
;;
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
+ | -aos* | -aros* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
-opened*)
os=-openedition
;;
+ -os400*)
+ os=-os400
+ ;;
-wince*)
os=-wince
;;
-atheos*)
os=-atheos
;;
+ -syllable*)
+ os=-syllable
+ ;;
-386bsd)
os=-bsd
;;
-sinix*)
os=-sysv4
;;
+ -tpf*)
+ os=-tpf
+ ;;
-triton*)
os=-sysv3
;;
-kaos*)
os=-kaos
;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
-none)
;;
*)
# system, and we'll never get to this point.
case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
*-acorn)
os=-riscix1.2
;;
arm*-semi)
os=-aout
;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
m68*-cisco)
os=-aout
;;
+ mep-*)
+ os=-elf
+ ;;
mips*-cisco)
os=-elf
;;
*-be)
os=-beos
;;
+ *-haiku)
+ os=-haiku
+ ;;
*-ibm)
os=-aix
;;
+ *-knuth)
+ os=-mmixware
+ ;;
*-wec)
os=-proelf
;;
-sunos*)
vendor=sun
;;
- -aix*)
+ -cnk*|-aix*)
vendor=ibm
;;
-beos*)
-mvs* | -opened*)
vendor=ibm
;;
+ -os400*)
+ vendor=ibm
+ ;;
-ptx*)
vendor=sequent
;;
+ -tpf*)
+ vendor=ibm
+ ;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
esac
echo $basic_machine$os
-exit 0
+exit
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
AS_IF([test "x$cross_compiling" = xyes],
[case $host_vendor in
- # The K1OM architecture is an extension of the x86 architecture.
- # So, the $host_arch is x86_64.
- k1om)
+ # The K1OM architecture is an extension of the x86 architecture
+ # and in MPSS 2.1 it's defined in $host_vendor. But in MPSS 3.x
+ # it's defined in $host_arch. So, try to support both case.
+ k1om | mpss)
+ AC_MSG_RESULT([Intel(R) Xeon Phi(TM)])
CC_TARGET_ARCH=`$CC -v 2>&1 | grep Target: | sed -e 's/Target: //'`
- if test $CC_TARGET_ARCH != x86_64-$host_vendor-linux ; then
+ if test \( $CC_TARGET_ARCH != x86_64-k1om-linux \
+ -a $CC_TARGET_ARCH != k1om-mpss-linux \)
+ then
AC_MSG_ERROR([Cross compiler not found in PATH.])
fi
CCAS=$CC
#! /bin/sh
-
# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
+
+scriptversion=2011-12-04.11; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
depmode=dashmstdout
fi
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
stat=$?
if test $stat -eq 0; then :
else
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
-## well.
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
-' ' ' >> $depfile
- echo >> $depfile
+' ' ' >> "$depfile"
+ echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
+ >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
- outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
rm -f "$tmpdepfile"
;;
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir.libs/$base.d"
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat
fi
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
rm -f "$tmpdepfile"
;;
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test "$stat" = 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/ \1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/ /
+ G
+ p
+}' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no
- for arg in "$@"; do
+ cleared=no eat=no
+ for arg
+ do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
done
"$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
+ # always write the preprocessed file to stdout.
"$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
IFS=" "
for arg
do
case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
;;
esac
done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
none)
exec "$@"
;;
esac
exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
#!/bin/sh
-#
# install - install a program, script, or datafile
-#
+
+scriptversion=2011-01-19.21; # UTC
+
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd=$cpprog
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "$0: no input file specified" >&2
- exit 1
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
else
- :
+ doit_exec=$doit
fi
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d "$dst" ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=$mkdirprog
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f "$src" ] || [ -d "$src" ]
- then
- :
- else
- echo "$0: $src does not exist" >&2
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "$0: no destination specified" >&2
- exit 1
- else
- :
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d "$dst" ]
- then
- dst=$dst/`basename "$src"`
- else
- :
- fi
-fi
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+src=
+dst=
+dir_arg=
+dst_arg=
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
+copy_on_change=false
+no_target_directory=
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
- '
-IFS="${IFS-$defaultIFS}"
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
-pathcomp=''
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
-while [ $# -ne 0 ] ; do
- pathcomp=$pathcomp$1
- shift
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
- if [ ! -d "$pathcomp" ] ;
- then
- $mkdirprog "$pathcomp"
- else
- :
- fi
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
- pathcomp=$pathcomp/
-done
-fi
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd "$dst" &&
+ -C) copy_on_change=true;;
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
+ -d) dir_arg=true;;
-# If we're going to rename the final executable, determine the name now.
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename "$dst"`
- else
- dstfile=`basename "$dst" $transformbasename |
- sed $transformarg`$transformbasename
- fi
+ --help) echo "$usage"; exit $?;;
-# don't allow the sed command to completely eliminate the filename
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename "$dst"`
- else
- :
- fi
+ -o) chowncmd="$chownprog $2"
+ shift;;
-# Make a couple of temp file names in the proper directory.
+ -s) stripcmd=$stripprog;;
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ -t) dst_arg=$2
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
-# Trap to clean up temp files at exit.
+ -T) no_target_directory=true;;
- trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
- trap '(exit $?); exit' 1 2 13 15
+ --version) echo "$0 $scriptversion"; exit $?;;
-# Move or copy the file name to the temp name
+ --) shift
+ break;;
- $doit $instcmd "$src" "$dsttmp" &&
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
-# and set any options; do chmod last to preserve setuid bits
+ *) break;;
+ esac
+ shift
+done
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
- if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
-# Now remove or move aside any old file at destination location. We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons. In this case, the final cleanup
-# might fail but the new file should still install successfully.
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
-{
- if [ -f "$dstdir/$dstfile" ]
- then
- $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
- $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
- {
- echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
- (exit 1); exit
- }
+for src
+do
+ # Protect names problematic for `test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
else
- :
+ mkdir_mode=
fi
-} &&
-# Now rename the file to the real destination.
-
- $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
-# The final little trick to "correctly" pass the exit status to the exit trap.
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
-{
- (exit 0); exit
-}
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
configure_ac=configure.in
fi
-case "$1" in
+msg="missing on your system"
+
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-h|--h|--he|--hel|--help)
echo "\
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
;;
-*)
exit 1
;;
- aclocal*)
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar*)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
fi
+ ;;
+esac
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
- autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
+ autoconf*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
- autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
+ autoheader*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
;;
automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
while read f; do touch "$f"; done
;;
- autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
+ autom4te*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
+ help2man*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
+ makeinfo*)
echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
+WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
touch $file
;;
- tar)
+ tar*)
shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
*)
echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
esac
exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
%if %{with servers}
Requires: lustre-osd
%endif
+%if %{defined cross_requires}
+Requires: %{cross_requires}
+AutoReqProv: no
+%else
# GSS requires this: BuildRequires: pkgconfig, libgssapi-devel >= 0.10
%if %{_vendor}=="redhat" || %{_vendor}=="fedora"
#suse don't support selinux
BuildRequires: libselinux-devel
Requires: libselinux
%endif
+%endif
%description
Userspace tools and files for the Lustre file system.
Summary: Kernel Lustre modules for Linux %{kversion}
%if %{defined cross_requires}
Requires: %{cross_requires}
+AutoReqProv: no
%else
# for SLES11, we need nothing here
# for SLES10, we need (where %{flavor} is, i.e. smp):