X-Git-Url: https://git.whamcloud.com/?p=fs%2Flustre-release.git;a=blobdiff_plain;f=lustre%2Ftests%2Finsanity.sh;h=f0cb4036522c02dbfdf4cb6e9a8c28a156a92687;hp=86c46ac336823f0cf11459d35a9872e830e497f5;hb=00bea252bac5b682d48911eb4f37c6ec87aca3f1;hpb=113303973ec9f8484eb2355a1a6ef3c4c7fd6a56

diff --git a/lustre/tests/insanity.sh b/lustre/tests/insanity.sh
index 86c46ac..f0cb403 100755
--- a/lustre/tests/insanity.sh
+++ b/lustre/tests/insanity.sh
@@ -8,24 +8,40 @@ LUSTRE=${LUSTRE:-`dirname $0`/..}
 
 init_test_env $@
 
-. ${CONFIG:=$LUSTRE/tests/cfg/insanity-local.sh}
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+init_logging
+#              
+ALWAYS_EXCEPT="10  $INSANITY_EXCEPT"
+
+if [ "$FAILURE_MODE" = "HARD" ]; then
+        skip_env "$0: is not functional with FAILURE_MODE = HARD, please use recovery-double-scale, bz20407"
+        exit 0
+fi
 
-ALWAYS_EXCEPT="10 $INSANITY_EXCEPT"
+#
+[ "$SLOW" = "no" ] && EXCEPT_SLOW=""
 
-SETUP=${SETUP:-"setup"}
-CLEANUP=${CLEANUP:-"cleanup"}
+SETUP=${SETUP:-""}
+CLEANUP=${CLEANUP:-""}
 
 build_test_filter
 
-assert_env mds_HOST MDS_MKFS_OPTS MDSDEV
+SINGLECLIENT=${SINGLECLIENT:-$HOSTNAME}
+LIVE_CLIENT=${LIVE_CLIENT:-$SINGLECLIENT}
+FAIL_CLIENTS=${FAIL_CLIENTS:-$RCLIENTS}
+
+assert_env mds_HOST MDS_MKFS_OPTS
 assert_env ost_HOST OST_MKFS_OPTS OSTCOUNT
 assert_env LIVE_CLIENT FSNAME
 
+require_dsh_mds || exit 0
+require_dsh_ost || exit 0
 
-# This can be a regexp, to allow more clients
-CLIENTS=${CLIENTS:-"`comma_list $LIVE_CLIENT $FAIL_CLIENTS $EXTRA_CLIENTS`"}
+# FAIL_CLIENTS list should not contain the LIVE_CLIENT
+FAIL_CLIENTS=$(echo " $FAIL_CLIENTS " | sed -re "s/\s+$LIVE_CLIENT\s+/ /g")
 
 DIR=${DIR:-$MOUNT}
+TESTDIR=$DIR/d0.$(basename $0 .sh)
 
 #####
 # fail clients round robin
@@ -44,33 +60,16 @@ set_fail_client() {
     echo "fail $FAIL_CLIENT, next is $FAIL_NEXT"
 }
 
-shutdown_client() {
-    client=$1
-    if [ "$FAILURE_MODE" = HARD ]; then
-       $POWER_DOWN $client
-       while ping -w 3 -c 1 $client > /dev/null 2>&1; do 
-	   echo "waiting for node $client to fail"
-	   sleep 1
-       done  
-    elif [ "$FAILURE_MODE" = SOFT ]; then
-       zconf_umount $client $MOUNT -f
-    fi
-}
-
-reboot_node() {
-    NODE=$1
-    if [ "$FAILURE_MODE" = HARD ]; then
-       $POWER_UP $NODE
-    fi
-}
-
 fail_clients() {
     num=$1
+
+    log "Request clients to fail: ${num}. Num of clients to fail: ${FAIL_NUM}, already failed: $DOWN_NUM"
     if [ -z "$num"  ] || [ "$num" -gt $((FAIL_NUM - DOWN_NUM)) ]; then
 	num=$((FAIL_NUM - DOWN_NUM)) 
     fi
     
     if [ -z "$num" ] || [ "$num" -le 0 ]; then
+        log "No clients failed!"
         return
     fi
 
@@ -86,7 +85,7 @@ fail_clients() {
     echo "down clients: $DOWN_CLIENTS"
 
     for client in $DOWN_CLIENTS; do
-	reboot_node $client
+	boot_node $client
     done
     DOWN_NUM=`echo $DOWN_CLIENTS | wc -w`
     client_rmdirs
@@ -106,51 +105,34 @@ start_ost() {
     start ost$1 `ostdevname $1` $OST_MOUNT_OPTS
 }
 
-setup() {
-    cleanup
-    rm -rf logs/*
-    formatall
-    setupall
-
-    while ! do_node $CLIENTS "ls -d $LUSTRE" > /dev/null; do sleep 5; done
-    grep " $MOUNT " /proc/mounts || zconf_mount $CLIENTS $MOUNT
-}
-
-cleanup() {
-    zconf_umount $CLIENTS $MOUNT
-    cleanupall
-    cleanup_check
-}
-
 trap exit INT
 
 client_touch() {
     file=$1
     for c in $LIVE_CLIENT $FAIL_CLIENTS;  do
 	if echo $DOWN_CLIENTS | grep -q $c; then continue; fi
-	$PDSH $c touch $MOUNT/${c}_$file || return 1
+	$PDSH $c touch $TESTDIR/${c}_$file || return 1
     done
 }
 
 client_rm() {
     file=$1
     for c in $LIVE_CLIENT $FAIL_CLIENTS;  do
-	$PDSH $c rm $MOUNT/${c}_$file
+	$PDSH $c rm $TESTDIR/${c}_$file
     done
 }
 
 client_mkdirs() {
     for c in $LIVE_CLIENT $FAIL_CLIENTS;  do
-	echo "$c mkdir $MOUNT/$c"
-	$PDSH $c "mkdir $MOUNT/$c"
-	$PDSH $c "ls -l $MOUNT/$c" 
+	echo "$c mkdir $TESTDIR/$c"
+	$PDSH $c "mkdir $TESTDIR/$c && ls -l $TESTDIR/$c"
     done
 }
 
 client_rmdirs() {
     for c in $LIVE_CLIENT $FAIL_CLIENTS;  do
-	echo "rmdir $MOUNT/$c"
-	$PDSH $LIVE_CLIENT "rmdir $MOUNT/$c"
+	echo "rmdir $TESTDIR/$c"
+	$PDSH $LIVE_CLIENT "rmdir $TESTDIR/$c"
     done
 }
 
@@ -159,37 +141,20 @@ clients_recover_osts() {
 #    do_node $CLIENTS "$LCTL "'--device %OSC_`hostname`_'"${facet}_svc_MNT_client_facet recover"
 }
 
-if [ "$ONLY" == "cleanup" ]; then
-    $CLEANUP
-    exit
-fi
+check_and_setup_lustre
 
-if [ ! -z "$EVAL" ]; then
-    eval "$EVAL"
-    exit $?
-fi
-
-$SETUP
-
-if [ "$ONLY" == "setup" ]; then
-    exit 0
-fi
+rm -rf $TESTDIR
+mkdir -p $TESTDIR
 
 # 9 Different Failure Modes Combinations
 echo "Starting Test 17 at `date`"
 
 test_0() {
-    facet_failover mds
-    echo "Waiting for df pid: $DFPID"
-    wait $DFPID || { echo "df returned $?" && return 1; }
+    fail $SINGLEMDS
 
-    facet_failover ost1 || return 4
-    echo "Waiting for df pid: $DFPID"
-    wait $DFPID || { echo "df returned $?" && return 2; }
-
-    facet_failover ost2 || return 5
-    echo "Waiting for df pid: $DFPID"
-    wait $DFPID || { echo "df returned $?" && return 3; }
+    for i in $(seq $OSTCOUNT) ; do
+        fail ost$i
+    done
     return 0
 }
 run_test 0 "Fail all nodes, independently"
@@ -205,16 +170,18 @@ run_test 1 "MDS/MDS failure"
 ############### Second Failure Mode ###############
 test_2() {
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
 
-    shutdown_facet mds
-    reboot_facet mds
+    shutdown_facet $SINGLEMDS
+    reboot_facet $SINGLEMDS
 
     # prepare for MDS failover
-    change_active mds
-    reboot_facet mds
+    change_active $SINGLEMDS
+    reboot_facet $SINGLEMDS
 
-    client_df &
+    clients_up &
     DFPID=$!
     sleep 5
 
@@ -222,17 +189,17 @@ test_2() {
 
     echo "Reintegrating OST"
     reboot_facet ost1
-    wait_for ost1
+    wait_for_facet ost1
     start_ost 1 || return 2
 
-    wait_for mds
-    start mds $MDSDEV $MDS_MOUNT_OPTS || return $?
+    wait_for_facet $SINGLEMDS
+    start $SINGLEMDS `mdsdevname 1` $MDS_MOUNT_OPTS || return $?
 
     #Check FS
     wait $DFPID
     clients_recover_osts ost1
     echo "Verify reintegration"
-    client_df || return 1
+    clients_up || return 1
 
 }
 run_test 2 "Second Failure Mode: MDS/OST `date`"
@@ -243,14 +210,14 @@ run_test 2 "Second Failure Mode: MDS/OST `date`"
 test_3() {
     #Create files
     echo "Verify Lustre filesystem is up and running"
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
     
     #MDS Portion
-    facet_failover mds
-    wait $DFPID || echo df failed: $?
+    fail $SINGLEMDS
     #Check FS
 
     echo "Test Lustre stability after MDS failover"
-    client_df
+    clients_up
 
     #CLIENT Portion
     echo "Failing 2 CLIENTS"
@@ -258,13 +225,14 @@ test_3() {
     
     #Check FS
     echo "Test Lustre stability after CLIENT failure"
-    client_df
+    clients_up
     
     #Reintegration
     echo "Reintegrating CLIENTS"
     reintegrate_clients || return 1
 
-    client_df || return 3
+    clients_up || return 3
+    sleep 2 # give it a little time for fully recovered before next test
 }
 run_test 3  "Thirdb Failure Mode: MDS/CLIENT `date`"
 ###################################################
@@ -278,48 +246,52 @@ test_4() {
  
     #Check FS
     echo "Test Lustre stability after OST failure"
-    client_df &
+    clients_up &
     DFPIDA=$!
     sleep 5
 
     #MDS Portion
-    shutdown_facet mds
-    reboot_facet mds
+    shutdown_facet $SINGLEMDS
+    reboot_facet $SINGLEMDS
 
     # prepare for MDS failover
-    change_active mds
-    reboot_facet mds
+    change_active $SINGLEMDS
+    reboot_facet $SINGLEMDS
 
-    client_df &
+    clients_up &
     DFPIDB=$!
     sleep 5
 
     #Reintegration
     echo "Reintegrating OST"
     reboot_facet ost1
-    wait_for ost1
+    wait_for_facet ost1
     start_ost 1
-    
-    wait_for mds
-    start mds $MDSDEV $MDS_MOUNT_OPTS
+
+    wait_for_facet $SINGLEMDS
+    start $SINGLEMDS `mdsdevname 1` $MDS_MOUNT_OPTS
     #Check FS
     
     wait $DFPIDA
     wait $DFPIDB
     clients_recover_osts ost1
     echo "Test Lustre stability after MDS failover"
-    client_df || return 1
+    clients_up || return 1
 }
 run_test 4 "Fourth Failure Mode: OST/MDS `date`"
 ###################################################
 
 ############### Fifth Failure Mode ###############
 test_5() {
+    [ $OSTCOUNT -lt 2 ] && skip_env "$OSTCOUNT < 2, not enough OSTs" && return 0
+
     echo "Fifth Failure Mode: OST/OST `date`"
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     
     #OST Portion
     shutdown_facet ost1
@@ -327,7 +299,7 @@ test_5() {
     
     #Check FS
     echo "Test Lustre stability after OST failure"
-    client_df &
+    clients_up &
     DFPIDA=$!
     sleep 5
     
@@ -337,15 +309,15 @@ test_5() {
 
     #Check FS
     echo "Test Lustre stability after OST failure"
-    client_df &
+    clients_up &
     DFPIDB=$!
     sleep 5
 
     #Reintegration
     echo "Reintegrating OSTs"
-    wait_for ost1
+    wait_for_facet ost1
     start_ost 1
-    wait_for ost2
+    wait_for_facet ost2
     start_ost 2
     
     clients_recover_osts ost1
@@ -354,7 +326,7 @@ test_5() {
 
     wait $DFPIDA
     wait $DFPIDB
-    client_df || return 2
+    clients_up || return 2
 }
 run_test 5 "Fifth Failure Mode: OST/OST `date`"
 ###################################################
@@ -365,7 +337,9 @@ test_6() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df || return 1
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     client_touch testfile || return 2
 	
     #OST Portion
@@ -374,8 +348,9 @@ test_6() {
 
     #Check FS
     echo "Test Lustre stability after OST failure"
-    client_df &
+    clients_up &
     DFPIDA=$!
+    echo DFPIDA=$DFPIDA
     sleep 5
 
     #CLIENT Portion
@@ -384,21 +359,25 @@ test_6() {
     
     #Check FS
     echo "Test Lustre stability after CLIENTs failure"
-    client_df &
+    clients_up &
     DFPIDB=$!
+    echo DFPIDB=$DFPIDB
     sleep 5
     
     #Reintegration
     echo "Reintegrating OST/CLIENTs"
-    wait_for ost1
+    wait_for_facet ost1
     start_ost 1
-    reintegrate_clients
+    reintegrate_clients || return 1
     sleep 5 
 
+    wait_remote_prog "stat -f" $((TIMEOUT * 3 + 20)) 
     wait $DFPIDA
     wait $DFPIDB
+
     echo "Verifying mount"
-    client_df || return 3
+    [ -z "$(mounted_lustre_filesystems)" ] && return 3
+    clients_up
 }
 run_test 6 "Sixth Failure Mode: OST/CLIENT `date`"
 ###################################################
@@ -410,7 +389,9 @@ test_7() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     client_touch testfile  || return 1
 
     #CLIENT Portion
@@ -419,9 +400,9 @@ test_7() {
     
     #Check FS
     echo "Test Lustre stability after CLIENTs failure"
-    client_df
-    $PDSH $LIVE_CLIENT "ls -l $MOUNT"
-    $PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile"
+    clients_up
+    $PDSH $LIVE_CLIENT "ls -l $TESTDIR"
+    $PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile"
     
     #Sleep
     echo "Wait 1 minutes"
@@ -429,22 +410,21 @@ test_7() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && return 2
+
+    clients_up
     client_rm testfile
 
     #MDS Portion
-    facet_failover mds
+    fail $SINGLEMDS
 
-    #Check FS
-    echo "Test Lustre stability after MDS failover"
-    wait $DFPID || echo "df on down clients fails " || return 1
-    $PDSH $LIVE_CLIENT "ls -l $MOUNT"
-    $PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile"
+    $PDSH $LIVE_CLIENT "ls -l $TESTDIR"
+    $PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile"
 
     #Reintegration
     echo "Reintegrating CLIENTs"
-    reintegrate_clients
-    client_df || return 2
+    reintegrate_clients || return 2
+    clients_up
     
     #Sleep
     echo "wait 1 minutes"
@@ -460,7 +440,9 @@ test_8() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     client_touch testfile
 	
     #CLIENT Portion
@@ -469,9 +451,9 @@ test_8() {
 
     #Check FS
     echo "Test Lustre stability after CLIENTs failure"
-    client_df
-    $PDSH $LIVE_CLIENT "ls -l $MOUNT"
-    $PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile"
+    clients_up
+    $PDSH $LIVE_CLIENT "ls -l $TESTDIR"
+    $PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile"
 
     #Sleep
     echo "Wait 1 minutes"
@@ -479,7 +461,9 @@ test_8() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     client_touch testfile
 
 
@@ -489,20 +473,20 @@ test_8() {
 
     #Check FS
     echo "Test Lustre stability after OST failure"
-    client_df &
+    clients_up &
     DFPID=$!
     sleep 5
     #non-failout hangs forever here
-    #$PDSH $LIVE_CLIENT "ls -l $MOUNT"
-    #$PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile"
+    #$PDSH $LIVE_CLIENT "ls -l $TESTDIR"
+    #$PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile"
     
     #Reintegration
     echo "Reintegrating CLIENTs/OST"
-    reintegrate_clients
-    wait_for ost1
+    reintegrate_clients || return 3
+    wait_for_facet ost1
     start_ost 1
     wait $DFPID
-    client_df || return 1
+    clients_up || return 1
     client_touch testfile2 || return 2
 
     #Sleep
@@ -519,7 +503,9 @@ test_9() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    client_df
+    [ -z "$(mounted_lustre_filesystems)" ] && error "Lustre is not running"
+
+    clients_up
     client_touch testfile || return 1
 	
     #CLIENT Portion
@@ -528,9 +514,9 @@ test_9() {
 
     #Check FS
     echo "Test Lustre stability after CLIENTs failure"
-    client_df
-    $PDSH $LIVE_CLIENT "ls -l $MOUNT" || return 1
-    $PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile" || return 2
+    clients_up
+    $PDSH $LIVE_CLIENT "ls -l $TESTDIR" || return 1
+    $PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile" || return 2
 
     #Sleep
     echo "Wait 1 minutes"
@@ -538,7 +524,7 @@ test_9() {
 
     #Create files
     echo "Verify Lustre filesystem is up and running"
-    $PDSH $LIVE_CLIENT df $MOUNT || return 3
+    client_up $LIVE_CLIENT || return 3
     client_touch testfile || return 4
 
     #CLIENT Portion
@@ -547,14 +533,14 @@ test_9() {
     
     #Check FS
     echo "Test Lustre stability after CLIENTs failure"
-    client_df
-    $PDSH $LIVE_CLIENT "ls -l $MOUNT" || return 5
-    $PDSH $LIVE_CLIENT "rm -f $MOUNT/*_testfile" || return 6
+    clients_up
+    $PDSH $LIVE_CLIENT "ls -l $TESTDIR" || return 5
+    $PDSH $LIVE_CLIENT "rm -f $TESTDIR/*_testfile" || return 6
 
     #Reintegration
     echo "Reintegrating  CLIENTs/CLIENTs"
-    reintegrate_clients
-    client_df || return 7
+    reintegrate_clients || return 7
+    clients_up
     
     #Sleep
     echo "Wait 1 minutes"
@@ -571,7 +557,6 @@ test_10() {
 }
 run_test 10 "Running Availability for 6 hours..."
 
-equals_msg "Done, cleaning up"
-$CLEANUP
-echo "$0: completed"
-
+complete $(basename $0) $SECONDS
+check_and_cleanup_lustre
+exit_status