X-Git-Url: https://git.whamcloud.com/?p=fs%2Flustre-release.git;a=blobdiff_plain;f=lustre%2Ftests%2Fconf-sanity.sh;h=d1bc9f4742a510dae426af09bb106032e4fe37b1;hp=7ab509ee4ef5ac796db3757e56821c5cde9fc8e1;hb=9229c0dec72e1da56df04749ab06fbb2e7713729;hpb=f433a28365fe0c50cbe70ad6700e2520918d2354

diff --git a/lustre/tests/conf-sanity.sh b/lustre/tests/conf-sanity.sh
index 7ab509e..d1bc9f4 100644
--- a/lustre/tests/conf-sanity.sh
+++ b/lustre/tests/conf-sanity.sh
@@ -1,6 +1,6 @@
 #!/bin/bash
-# requirement:
-#	add uml1 uml2 uml3 in your /etc/hosts
+# -*- mode: Bash; tab-width: 4; indent-tabs-mode: t; -*-
+# vim:autoindent:shiftwidth=4:tabstop=4:
 
 # FIXME - there is no reason to use all of these different
 #   return codes, espcially when most of them are mapped to something
@@ -11,11 +11,9 @@ set -e
 
 ONLY=${ONLY:-"$*"}
 
-# bug number for skipped test: 13739
-HEAD_EXCEPT="                  32a"
-
-# bug number for skipped test:                                 
-ALWAYS_EXCEPT=" $CONF_SANITY_EXCEPT $HEAD_EXCEPT"
+# bug number for skipped test:
+#               15977
+ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
 
 SRCDIR=`dirname $0`
@@ -28,19 +26,23 @@ RLUSTRE=${RLUSTRE:-$LUSTRE}
 
 . $LUSTRE/tests/test-framework.sh
 init_test_env $@
+
+# use small MDS + OST size to speed formatting time
+# do not use too small MDSSIZE/OSTSIZE, which affect the default jouranl size
+MDSSIZE=200000
+OSTSIZE=200000
+. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
+
 # STORED_MDSSIZE is used in test_18
 if [ -n "$MDSSIZE" ]; then
     STORED_MDSSIZE=$MDSSIZE
 fi
-# use small MDS + OST size to speed formatting time
-MDSSIZE=40000
-OSTSIZE=40000
-. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
 
-remote_mds_nodsh && skip "remote MDS with nodsh" && exit 0
-remote_ost_nodsh && skip "remote OST with nodsh" && exit 0
+init_logging
+
+require_dsh_mds || exit 0
+require_dsh_ost || exit 0
 
-#
 [ "$SLOW" = "no" ] && EXCEPT_SLOW="0 1 2 3 6 7 15 18 24b 25 30 31 32 33 34a 45"
 
 assert_DIR
@@ -50,26 +52,40 @@ reformat() {
 }
 
 writeconf() {
-    local facet=$SINGLEMDS
-    local dev=${facet}_dev
-    shift
-    stop ${facet} -f
-    rm -f ${facet}active
-    # who knows if/where $TUNEFS is installed?  Better reformat if it fails...
-    do_facet ${facet} "$TUNEFS --writeconf ${!dev}" || echo "tunefs failed, reformatting instead" && reformat
+	local facet=$SINGLEMDS
+	local dev=${facet}_dev
+	shift
+	stop ${facet} -f
+	rm -f ${facet}active
+	# who knows if/where $TUNEFS is installed?  Better reformat if it fails...
+	do_facet ${facet} "$TUNEFS --writeconf ${!dev}" ||
+		echo "tunefs failed, reformatting instead" && reformat_and_config
+
 }
 
 gen_config() {
-        reformat
-        # The MGS must be started before the OSTs for a new fs, so start
-        # and stop to generate the startup logs. 
+	# The MGS must be started before the OSTs for a new fs, so start
+	# and stop to generate the startup logs.
 	start_mds
 	start_ost
-	sleep 5
+        wait_osc_import_state mds ost FULL
 	stop_ost
 	stop_mds
 }
 
+reformat_and_config() {
+	reformat
+	if ! combined_mgs_mds ; then
+		start_mgs
+	fi
+	gen_config
+}
+
+start_mgs () {
+	echo "start mgs"
+	start mgs $MGSDEV $mgs_MOUNT_OPTS
+}
+
 start_mds() {
 	local facet=$SINGLEMDS
 	# we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
@@ -138,20 +154,24 @@ manual_umount_client(){
 }
 
 setup() {
-	start_ost
-	start_mds
-	mount_client $MOUNT
+	start_mds || error "MDT start failed"
+	start_ost || error "OST start failed"
+	mount_client $MOUNT || error "client start failed"
 }
 
 setup_noconfig() {
+	if ! combined_mgs_mds ; then
+		start_mgs
+	fi
+
 	start_mds
 	start_ost
 	mount_client $MOUNT
 }
 
 cleanup_nocli() {
-	stop_mds || return 201
 	stop_ost || return 202
+	stop_mds || return 201
 	unload_modules || return 203
 }
 
@@ -163,17 +183,17 @@ cleanup() {
 check_mount() {
 	do_facet client "cp /etc/passwd $DIR/a" || return 71
 	do_facet client "rm $DIR/a" || return 72
-	# make sure lustre is actually mounted (touch will block, 
-        # but grep won't, so do it after) 
+	# make sure lustre is actually mounted (touch will block,
+        # but grep won't, so do it after)
         do_facet client "grep $MOUNT' ' /proc/mounts > /dev/null" || return 73
 	echo "setup single mount lustre success"
 }
 
 check_mount2() {
-	do_facet client "touch $DIR/a" || return 71	
-	do_facet client "rm $DIR/a" || return 72	
-	do_facet client "touch $DIR2/a" || return 73	
-	do_facet client "rm $DIR2/a" || return 74	
+	do_facet client "touch $DIR/a" || return 71
+	do_facet client "rm $DIR/a" || return 72
+	do_facet client "touch $DIR2/a" || return 73
+	do_facet client "rm $DIR2/a" || return 74
 	echo "setup double mount lustre success"
 }
 
@@ -193,7 +213,7 @@ init_gss
 
 #create single point mountpoint
 
-gen_config
+reformat_and_config
 
 test_0() {
         setup
@@ -203,19 +223,21 @@ test_0() {
 run_test 0 "single mount setup"
 
 test_1() {
+	start_mds || error "MDT start failed"
 	start_ost
 	echo "start ost second time..."
-	setup
+	start_ost && error "2nd OST start should fail"
+	mount_client $MOUNT || error "client start failed"
 	check_mount || return 42
 	cleanup || return $?
 }
 run_test 1 "start up ost twice (should return errors)"
 
 test_2() {
-	start_ost
 	start_mds
 	echo "start mds second time.."
-	start_mds
+	start_mds && error "2nd MDT start should fail"
+	start_ost
 	mount_client $MOUNT
 	check_mount || return 43
 	cleanup || return $?
@@ -225,7 +247,7 @@ run_test 2 "start up mds twice (should return err)"
 test_3() {
 	setup
 	#mount.lustre returns an error if already in mtab
-	mount_client $MOUNT && return $?
+	mount_client $MOUNT && error "2nd client mount should fail"
 	check_mount || return 44
 	cleanup || return $?
 }
@@ -308,8 +330,8 @@ test_5b() {
 run_test 5b "mds down, cleanup after failed mount (bug 2712) (should return errs)"
 
 test_5c() {
-	start_ost
 	start_mds
+	start_ost
 	[ -d $MOUNT ] || mkdir -p $MOUNT
 	grep " $MOUNT " /etc/mtab && echo "test 5c: mtab before mount" && return 10
 	local oldfs="${FSNAME}"
@@ -335,8 +357,8 @@ test_5d() {
 run_test 5d "mount with ost down"
 
 test_5e() {
-	start_ost
 	start_mds
+	start_ost
 
 #define OBD_FAIL_PTLRPC_DELAY_SEND       0x506
 	do_facet client "lctl set_param fail_loc=0x80000506"
@@ -382,7 +404,7 @@ test_9() {
         CHECK_PTLDEBUG="`do_facet ost1 lctl get_param -n debug`"
         if [ "$CHECK_PTLDEBUG" ] && { \
 	   [ "$CHECK_PTLDEBUG" = "trace inode warning error emerg console" ] ||
-	   [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then   
+	   [ "$CHECK_PTLDEBUG" = "trace inode" ]; }; then
            echo "lnet.debug success"
         else
            echo "lnet.debug: want 'trace inode', have '$CHECK_PTLDEBUG'"
@@ -403,8 +425,8 @@ run_test 9 "test ptldebug and subsystem for mkfs"
 # LOGS/PENDING do not exist anymore since CMD3
 test_16() {
         local TMPMTPT="${TMP}/conf16"
-        local dev=${SINGLEMDS}_dev
-        local MDSDEV=${!dev}
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
         if [ ! -e "$MDSDEV" ]; then
             log "no $MDSDEV existing, so mount Lustre to create one"
 	    setup
@@ -437,8 +459,7 @@ test_16() {
 run_test 16 "verify that lustre will correct the mode of OBJECTS"
 
 test_17() {
-        local dev=${SINGLEMDS}_dev
-        local MDSDEV=${!dev}
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 
         if [ ! -e "$MDSDEV" ]; then
             echo "no $MDSDEV existing, so mount Lustre to create one"
@@ -452,15 +473,14 @@ test_17() {
 
         start_ost
 	start_mds && return 42
-	gen_config
+	reformat_and_config
 }
 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
 
 test_18() {
         [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
 
-        local dev=${SINGLEMDS}_dev
-        local MDSDEV=${!dev}
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 
         local MIN=2000000
 
@@ -487,7 +507,7 @@ test_18() {
                 [ $SPACE -gt $((MIN / 20)) ] && OK=1 && myMDSSIZE=$MIN && \
                         log "use file $MDSDEV with MIN=$MIN"
 
-        [ -z "$OK" ] && skip "$MDSDEV too small for ${MIN}kB MDS" && return
+        [ -z "$OK" ] && skip_env "$MDSDEV too small for ${MIN}kB MDS" && return
 
 
         echo "mount mds with large journal..."
@@ -495,7 +515,7 @@ test_18() {
 
         MDS_MKFS_OPTS="--mgs --mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
 
-        gen_config
+        reformat_and_config
         echo "mount lustre system..."
 	setup
         check_mount || return 41
@@ -511,7 +531,7 @@ test_18() {
         cleanup || return $?
 
         MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
-        gen_config
+        reformat_and_config
 }
 run_test 18 "check mkfs creates large journals"
 
@@ -529,8 +549,8 @@ run_test 19b "start/stop OSTs without MDS"
 
 test_20() {
 	# first format the ost/mdt
-	start_ost
 	start_mds
+	start_ost
 	mount_client $MOUNT
 	check_mount || return 43
 	rm -f $DIR/$tfile
@@ -551,6 +571,7 @@ run_test 20 "remount ro,rw mounts work and doesn't break /etc/mtab"
 test_21a() {
         start_mds
 	start_ost
+        wait_osc_import_state mds ost FULL
 	stop_ost
 	stop_mds
 }
@@ -559,6 +580,7 @@ run_test 21a "start mds before ost, stop ost first"
 test_21b() {
         start_ost
 	start_mds
+        wait_osc_import_state mds ost FULL
 	stop_mds
 	stop_ost
 }
@@ -568,6 +590,7 @@ test_21c() {
         start_ost
 	start_mds
 	start_ost2
+        wait_osc_import_state mds ost2 FULL
 	stop_ost
 	stop_ost2
 	stop_mds
@@ -582,11 +605,12 @@ test_22() {
 	echo Client mount with ost in logs, but none running
 	start_ost
 	# wait until mds connected to ost and open client connection
-	# ping_interval + 1
-	sleep $((TIMEOUT / 4 + 1))
+        wait_osc_import_state mds ost FULL
 	stop_ost
 	mount_client $MOUNT
 	# check_mount will block trying to contact ost
+	mcreate $DIR/$tfile || return 40
+	rm -f $DIR/$tfile || return 42
 	umount_client $MOUNT
 	pass
 
@@ -609,9 +633,9 @@ test_22() {
 run_test 22 "start a client before osts (should return errs)"
 
 test_23a() {	# was test_23
-        setup
-        # fail mds
-	stop $SINGLEMDS   
+	setup
+	# fail mds
+	stop $SINGLEMDS
 	# force down client so that recovering mds waits for reconnect
 	local running=$(grep -c $MOUNT /proc/mounts) || true
     	if [ $running -ne 0 ]; then
@@ -637,7 +661,7 @@ test_23a() {	# was test_23
 	local PID1
 	local PID2
 	local WAIT=0
-	local MAX_WAIT=20
+	local MAX_WAIT=30
 	local sleep=1
 	while [ "$WAIT" -lt "$MAX_WAIT" ]; do
 		sleep $sleep
@@ -649,9 +673,11 @@ test_23a() {	# was test_23
 		echo "waiting for mount to finish ... "
 		WAIT=$(( WAIT + sleep))
 	done
-	[ "$WAIT" -eq "$MAX_WAIT" ] && error "MOUNT_PID $MOUNT_PID and \
-		MOUNT__LUSTRE_PID $MOUNT__LUSTRE_PID still not killed in $WAIT secs"
-	ps -ef | grep mount
+	if [ "$WAIT" -eq "$MAX_WAIT" ]; then
+		error "MOUNT_PID $MOUNT_PID and "\
+		"MOUNT_LUSTRE_PID $MOUNT_LUSTRE_PID still not killed in $WAIT secs"
+		ps -ef | grep mount
+	fi
 	stop_mds || error
 	stop_ost || error
 }
@@ -661,8 +687,8 @@ umount_client $MOUNT
 cleanup_nocli
 
 test_23b() {    # was test_23
-	start_ost
 	start_mds
+	start_ost
 	# Simulate -EINTR during mount OBD_FAIL_LDLM_CLOSE_THREAD
 	lctl set_param fail_loc=0x80000313
 	mount_client $MOUNT
@@ -684,13 +710,16 @@ cleanup_24a() {
 }
 
 test_24a() {
-	#set up fs1 
+	#set up fs1
 	gen_config
+
 	#set up fs2
+	local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
 	[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
 	if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
 		do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
-		skip "mixed loopback and real device not working" && return
+		skip_env "mixed loopback and real device not working" && return
 	fi
 
 	local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
@@ -719,11 +748,11 @@ test_24a() {
 	rm $MOUNT2/b || return 4
 	# 2 is actually mounted
         grep $MOUNT2' ' /proc/mounts > /dev/null || return 5
-	# failover 
+	# failover
 	facet_failover fs2mds
 	facet_failover fs2ost
 	df
- 	umount_client $MOUNT 
+ 	umount_client $MOUNT
 	# the MDS must remain up until last MDT
 	stop_mds
 	MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
@@ -734,14 +763,16 @@ test_24a() {
 run_test 24a "Multiple MDTs on a single node"
 
 test_24b() {
+	local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
 	if [ -z "$fs2mds_DEV" ]; then
 		do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
-		skip "mixed loopback and real device not working" && return
+		skip_env "mixed loopback and real device not working" && return
 	fi
 
 	local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
 
-	add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10 
+	add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
 	setup
 	start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && return 2
 	cleanup || return 6
@@ -775,7 +806,7 @@ set_and_check() {
 	local myfacet=$1
 	local TEST=$2
 	local PARAM=$3
-	local ORIG=$(do_facet $myfacet "$TEST") 
+	local ORIG=$(do_facet $myfacet "$TEST")
 	if [ $# -gt 3 ]; then
 	    local FINAL=$4
 	else
@@ -783,16 +814,16 @@ set_and_check() {
 	    FINAL=$(($ORIG + 5))
 	fi
 	echo "Setting $PARAM from $ORIG to $FINAL"
-	do_facet $SINGLEMDS "$LCTL conf_param $PARAM=$FINAL" || error conf_param failed
+	do_facet $SINGLEMDS "$LCTL conf_param $PARAM='$FINAL'" || error conf_param failed
 
-	wait_update $(facet_host $myfacet) "$TEST" $FINAL || error check failed!
+	wait_update $(facet_host $myfacet) "$TEST" "$FINAL" || error check failed!
 }
 
 test_27a() {
 	start_ost || return 1
 	start_mds || return 2
-	echo "Requeue thread should have started: " 
-	ps -e | grep ll_cfg_requeue 
+	echo "Requeue thread should have started: "
+	ps -e | grep ll_cfg_requeue
 	set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
 	cleanup_nocli
 }
@@ -835,7 +866,7 @@ test_28() {
 run_test 28 "permanent parameter setting"
 
 test_29() {
-	[ "$OSTCOUNT" -lt "2" ] && skip "$OSTCOUNT < 2, skipping" && return
+	[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
         setup > /dev/null 2>&1
 	start_ost2
 	sleep 10
@@ -856,7 +887,7 @@ test_29() {
 	    echo "Live client success: got $RESULT"
 	fi
 
-	# check MDT too 
+	# check MDT too
 	local MPROC="osc.$FSNAME-OST0001-osc-[M]*.active"
 	local MAX=30
 	local WAIT=0
@@ -895,30 +926,70 @@ test_29() {
 	cleanup_nocli
 	#writeconf to remove all ost2 traces for subsequent tests
 	writeconf
-	start_mds
-	start_ost
-	sleep 5
-	cleanup
 }
 run_test 29 "permanently remove an OST"
 
-test_30() {
+test_30a() {
 	setup
 
+	echo Big config llog
 	TEST="lctl get_param -n llite.$FSNAME-*.max_read_ahead_whole_mb"
 	ORIG=$($TEST)
 	LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
 	for i in ${LIST[@]}; do
 	    set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
 	done
-	# make sure client restart still works 
+	# make sure client restart still works
  	umount_client $MOUNT
 	mount_client $MOUNT || return 4
-	[ "$($TEST)" -ne "$i" ] && return 5   
-	set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $ORIG || return 6
+	[ "$($TEST)" -ne "$i" ] && error "Param didn't stick across restart $($TEST) != $i"
+	pass
+
+	echo Erase parameter setting
+	do_facet mgs "$LCTL conf_param -d $FSNAME.llite.max_read_ahead_whole_mb" || return 6
+	umount_client $MOUNT
+	mount_client $MOUNT || return 6
+	FINAL=$($TEST)
+	echo "deleted (default) value=$FINAL, orig=$ORIG"
+	# assumes this parameter started at the default value
+	[ "$FINAL" -eq "$ORIG" ] || fail "Deleted value=$FINAL, orig=$ORIG"
+
 	cleanup
 }
-run_test 30 "Big config llog"
+run_test 30a "Big config llog and conf_param deletion"
+
+test_30b() {
+	setup
+
+	# Make a fake nid.  Use the OST nid, and add 20 to the least significant
+	# numerical part of it. Hopefully that's not already a failover address for
+	# the server.
+	OSTNID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+	ORIGVAL=$(echo $OSTNID | egrep -oi "[0-9]*@")
+	NEWVAL=$((($(echo $ORIGVAL | egrep -oi "[0-9]*") + 20) % 256))
+	NEW=$(echo $OSTNID | sed "s/$ORIGVAL/$NEWVAL@/")
+	echo "Using fake nid $NEW"
+
+	TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
+	set_and_check client "$TEST" "$FSNAME-OST0000.failover.node" $NEW || error "didn't add failover nid $NEW"
+	NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
+	echo $NIDS
+	NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
+	echo "should have 2 failover nids: $NIDCOUNT"
+	[ $NIDCOUNT -eq 2 ] || error "Failover nid not added"
+	do_facet mgs "$LCTL conf_param -d $FSNAME-OST0000.failover.node" || error "conf_param delete failed"
+	umount_client $MOUNT
+	mount_client $MOUNT || return 3
+
+	NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
+	echo $NIDS
+	NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
+	echo "only 1 final nid should remain: $NIDCOUNT"
+	[ $NIDCOUNT -eq 1 ] || error "Failover nids not removed"
+
+	cleanup
+}
+run_test 30b "Remove failover nids"
 
 test_31() { # bug 10734
         # ipaddr must not exist
@@ -928,7 +999,7 @@ test_31() { # bug 10734
 run_test 31 "Connect to non-existent node (shouldn't crash)"
 
 # Use these start32/stop32 fn instead of t-f start/stop fn,
-# for local devices, to skip global facet vars init 
+# for local devices, to skip global facet vars init
 stop32 () {
 	local facet=$1
 	shift
@@ -946,11 +1017,11 @@ start32 () {
 
 	echo "Starting local ${facet}: $@ $device ${MOUNT%/*}/${facet}"
 	mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}
-	RC=$?
+	local RC=$?
 	if [ $RC -ne 0 ]; then
 		echo "mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}"
 		echo "Start of ${device} of local ${facet} failed ${RC}"
-	fi 
+	fi
 	losetup -a
 	return $RC
 }
@@ -971,66 +1042,59 @@ cleanup_32() {
 }
 
 test_32a() {
-	# this test is totally useless on a client-only system
-	[ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+	client_only && skip "client only testing" && return 0
 	[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
-	[ -z "$TUNEFS" ] && skip "No tunefs" && return 0
-	local DISK1_8=$LUSTRE/tests/disk1_8.tgz
-	[ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
+	[ -z "$TUNEFS" ] && skip_env "No tunefs" && return 0
 
-	mkdir -p $TMP/$tdir
-	tar xjvf $DISK1_8 -C $TMP/$tdir || \
-		{ skip "Cannot untar $DISK1_8" && return 0; }
+	local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
+	[ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
+	local tmpdir=$TMP/conf32a
+	mkdir -p $tmpdir
+	tar xjvf $DISK1_8 -C $tmpdir || \
+		{ skip_env "Cannot untar $DISK1_8" && return 0; }
 
 	load_modules
-	lctl set_param debug=$PTLDEBUG
+	$LCTL set_param debug=$PTLDEBUG
 
 	$TUNEFS $tmpdir/mds || error "tunefs failed"
 
 	# nids are wrong, so client wont work, but server should start
-	start32 mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
+	start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
 		trap cleanup_32 EXIT INT || return 3
-	
-	local UUID=$(lctl get_param -n mds.lustre-MDT0000.uuid)
+
+	local UUID=$($LCTL get_param -n mdt.lustre-MDT0000.uuid)
 	echo MDS uuid $UUID
-	[ "$UUID" == "mdsA_UUID" ] || error "UUID is wrong: $UUID" 
+	[ "$UUID" == "lustre-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
 
-	$TUNEFS --mgsnode=`hostname` $tmpdir/ost1 || error "tunefs failed"
+	$TUNEFS --mgsnode=$HOSTNAME $tmpdir/ost1 || error "tunefs failed"
 	start32 ost1 $tmpdir/ost1 "-o loop" || return 5
-	UUID=$(lctl get_param -n obdfilter.lustre-OST0000.uuid)
+	UUID=$($LCTL get_param -n obdfilter.lustre-OST0000.uuid)
 	echo OST uuid $UUID
-	[ "$UUID" == "ost1_UUID" ] || error "UUID is wrong: $UUID" 
+	[ "$UUID" == "lustre-OST0000_UUID" ] || error "UUID is wrong: $UUID"
 
 	local NID=$($LCTL list_nids | head -1)
 
-	echo "OSC changes should return err:" 
-	$LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 && return 7
-	$LCTL conf_param lustre-OST0000.failover.node=$NID && return 8
+	echo "OSC changes should succeed:"
+	$LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 || return 7
+	$LCTL conf_param lustre-OST0000.failover.node=$NID || return 8
 	echo "ok."
-	echo "MDC changes should succeed:" 
+
+	echo "MDC changes should succeed:"
 	$LCTL conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
 	$LCTL conf_param lustre-MDT0000.failover.node=$NID || return 10
 	echo "ok."
 
-	# With a new good MDT failover nid, we should be able to mount a client
-	# (but it cant talk to OST)
-	local mountopt="-o exclude=lustre-OST0000"
-
-	local device=`h2$NETTYPE $HOSTNAME`:/lustre
-	echo "Starting local client: $HOSTNAME: $mountopt $device $MOUNT"
-	mount -t lustre $mountopt $device $MOUNT || return 1
-
-	local old=$(lctl get_param -n mdc.*.max_rpcs_in_flight)
-	local new=$((old + 5))
-	lctl conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=$new
-	wait_update $HOSTNAME "lctl get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
+	echo "LOV changes should succeed:"
+	$LCTL pool_new lustre.interop || return 11
+	$LCTL conf_param lustre-MDT0000.lov.stripesize=4M || return 12
+	echo "ok."
 
 	cleanup_32
 
 	# mount a second time to make sure we didnt leave upgrade flag on
 	load_modules
 	$TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
-	start32 mds $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
+	start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
 		trap cleanup_32 EXIT INT || return 12
 
 	cleanup_32
@@ -1040,20 +1104,19 @@ test_32a() {
 run_test 32a "Upgrade from 1.8 (not live)"
 
 test_32b() {
-	# this test is totally useless on a client-only system
-	[ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+	client_only && skip "client only testing" && return 0
 	[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
-	[ -z "$TUNEFS" ] && skip "No tunefs" && return
+	[ -z "$TUNEFS" ] && skip_env "No tunefs" && return
 
-	local DISK1_8=$LUSTRE/tests/disk1_8.tgz
-	[ ! -r $DISK1_8 ] && skip "Cannot find $DISK1_8" && return 0
-	local tmpdir=$TMP/$tdir
+	local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
+	[ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
+	local tmpdir=$TMP/conf32b
 	mkdir -p $tmpdir
 	tar xjvf $DISK1_8 -C $tmpdir || \
-		{ skip "Cannot untar $DISK1_8" && return ; }
+		{ skip_env "Cannot untar $DISK1_8" && return ; }
 
 	load_modules
-	lctl set_param debug=$PTLDEBUG
+	$LCTL set_param debug="config"
 	local NEWNAME=lustre
 
 	# writeconf will cause servers to register with their current nids
@@ -1061,22 +1124,32 @@ test_32b() {
 	start32 mds1 $tmpdir/mds "-o loop" && \
 		trap cleanup_32 EXIT INT || return 3
 
-	local UUID=$(lctl get_param -n mdt.${NEWNAME}-MDT0000.uuid)
+	local UUID=$($LCTL get_param -n mdt.${NEWNAME}-MDT0000.uuid)
 	echo MDS uuid $UUID
-	[ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID" 
+	[ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
 
-	$TUNEFS --mgsnode=`hostname` --writeconf --fsname=$NEWNAME $tmpdir/ost1 || error "tunefs failed"
+	$TUNEFS --mgsnode=$HOSTNAME --writeconf --fsname=$NEWNAME $tmpdir/ost1 ||\
+	    error "tunefs failed"
 	start32 ost1 $tmpdir/ost1 "-o loop" || return 5
-	UUID=$(lctl get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
+	UUID=$($LCTL get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
 	echo OST uuid $UUID
 	[ "$UUID" == "${NEWNAME}-OST0000_UUID" ] || error "UUID is wrong: $UUID"
 
-	echo "OSC changes should succeed:" 
+	local NID=$($LCTL list_nids | head -1)
+
+	echo "OSC changes should succeed:"
 	$LCTL conf_param ${NEWNAME}-OST0000.osc.max_dirty_mb=15 || return 7
 	$LCTL conf_param ${NEWNAME}-OST0000.failover.node=$NID || return 8
 	echo "ok."
-	echo "MDC changes should succeed:" 
+
+	echo "MDC changes should succeed:"
 	$LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
+	$LCTL conf_param ${NEWNAME}-MDT0000.failover.node=$NID || return 10
+	echo "ok."
+
+	echo "LOV changes should succeed:"
+	$LCTL pool_new ${NEWNAME}.interop || return 11
+	$LCTL conf_param ${NEWNAME}-MDT0000.lov.stripesize=4M || return 12
 	echo "ok."
 
 	# MDT and OST should have registered with new nids, so we should have
@@ -1087,10 +1160,10 @@ test_32b() {
 	echo "Starting local client: $HOSTNAME: $device $MOUNT"
 	mount -t lustre $device $MOUNT || return 1
 
-	local old=$(lctl get_param -n mdc.*.max_rpcs_in_flight)
+	local old=$($LCTL get_param -n mdc.*.max_rpcs_in_flight)
 	local new=$((old + 5))
-	lctl conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=$new
-	wait_update $HOSTNAME "lctl get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
+	$LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=$new
+	wait_update $HOSTNAME "$LCTL get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
 
 	[ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "94306271 1478" ] || return 12
 	echo "ok."
@@ -1104,16 +1177,18 @@ run_test 32b "Upgrade from 1.8 with writeconf"
 test_33a() { # bug 12333, was test_33
         local rc=0
         local FSNAME2=test-123
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+
         [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
 
         if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" ]; then
                 do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
-                skip "mixed loopback and real device not working" && return
+                skip_env "mixed loopback and real device not working" && return
         fi
 
         local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
         local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
-        add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
+        add fs2mds $MDS_MKFS_OPTS --mkfsoptions='\"-J size=8\"' --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
         add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
 
         start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
@@ -1123,7 +1198,7 @@ test_33a() { # bug 12333, was test_33
         mount -t lustre $MGSNID:/${FSNAME2} $MOUNT2 || rc=2
         echo "ok."
 
-        cp /etc/hosts $MOUNT2/ || rc=3 
+        cp /etc/hosts $MOUNT2/ || rc=3
         $LFS getstripe $MOUNT2/hosts
 
         umount -d $MOUNT2
@@ -1195,7 +1270,7 @@ test_34c() {
 }
 run_test 34c "force umount with failed ost should be normal"
 
-test_35() { # bug 12459
+test_35a() { # bug 12459
 	setup
 
 	DBG_SAVE="`lctl get_param -n debug`"
@@ -1209,7 +1284,7 @@ test_35() { # bug 12459
 	log "Wait for RECONNECT_INTERVAL seconds (10s)"
 	sleep 10
 
-	MSG="conf-sanity.sh test_35 `date +%F%kh%Mm%Ss`"
+	MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
 	$LCTL clear
 	log "$MSG"
 	log "Stopping the MDT:"
@@ -1240,21 +1315,89 @@ test_35() { # bug 12459
 	[ "$NEXTCONN" != "0" ] && log "The client didn't try to reconnect to the last active server (tried ${NEXTCONN} instead)" && return 7
 	cleanup
 }
-run_test 35 "Reconnect to the last active server first"
+run_test 35a "Reconnect to the last active server first"
+
+test_35b() { # bug 18674
+	remote_mds || { skip "local MDS" && return 0; }
+	setup
+
+	debugsave
+	$LCTL set_param debug="ha"
+	$LCTL clear
+	MSG="conf-sanity.sh test_35b `date +%F%kh%Mm%Ss`"
+	log "$MSG"
+
+	log "Set up a fake failnode for the MDS"
+	FAKENID="127.0.0.2"
+	local device=$(do_facet mds "$LCTL get_param -n devices" | \
+			awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
+	do_facet mds "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
+		return 1
+
+	local at_max_saved=0
+	# adaptive timeouts may prevent seeing the issue 
+	if at_is_enabled; then
+		at_max_saved=$(at_max_get mds)
+		at_max_set 0 mds client
+	fi
+
+	mkdir -p $MOUNT/testdir
+	touch $MOUNT/testdir/test
+
+	log "Injecting EBUSY on MDS"
+	# Setting OBD_FAIL_MDS_RESEND=0x136
+	do_facet mds "$LCTL set_param fail_loc=0x80000136" || return 2
+
+	log "Stat on a test file"
+	stat $MOUNT/testdir/test
+
+	log "Stop injecting EBUSY on MDS"
+	do_facet mds "$LCTL set_param fail_loc=0" || return 3
+	rm -f $MOUNT/testdir/test
+
+	log "done"
+	# restore adaptive timeout
+	[ $at_max_saved -ne 0 ] && at_max_set $at_max_saved mds client
+
+	$LCTL dk $TMP/lustre-log-$TESTNAME.log
+
+	# retrieve from the log if the client has ever tried to
+	# contact the fake server after the loss of connection
+	FAILCONN=`awk "BEGIN {ret = 0;}
+		       /import_select_connection.*${FSNAME}-MDT0000-mdc.* using connection/ {
+				ret = 1;
+				if (\\\$NF ~ /$FAKENID/) {
+					ret = 2;
+					exit;
+				}
+		       }
+		       END {print ret}" $TMP/lustre-log-$TESTNAME.log`
+
+	[ "$FAILCONN" == "0" ] && \
+		log "ERROR: The client reconnection has not been triggered" && \
+		return 4
+	[ "$FAILCONN" == "2" ] && \
+		log "ERROR: The client tried to reconnect to the failover server while the primary was busy" && \
+		return 5
+
+        cleanup
+}
+run_test 35b "Continue reconnection retries, if the active server is busy"
 
 test_36() { # 12743
         local rc
         local FSNAME2=test1234
         local fs3ost_HOST=$ost_HOST
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 
         [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST && fs3ost_HOST=$ost1_HOST
         rc=0
 
         if [ -z "$fs2ost_DEV" -o -z "$fs2mds_DEV" -o -z "$fs3ost_DEV" ]; then
 		do_facet $SINGLEMDS [ -b "$MDSDEV" ] && \
-		skip "mixed loopback and real device not working" && return
+		skip_env "mixed loopback and real device not working" && return
         fi
-        [ $OSTCOUNT -lt 2 ] && skip "skipping test for single OST" && return
+        [ $OSTCOUNT -lt 2 ] && skip_env "skipping test for single OST" && return
 
 	[ "$ost_HOST" = "`hostname`" -o "$ost1_HOST" = "`hostname`" ] || \
 		{ skip "remote OST" && return 0; }
@@ -1289,17 +1432,17 @@ test_36() { # 12743
 
         ALLOWANCE=$((64 * $OSTCOUNT))
 
-        if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||  
+        if [ $DFTOTAL -lt $(($BKTOTAL - $ALLOWANCE)) ] ||
            [ $DFTOTAL -gt $(($BKTOTAL + $ALLOWANCE)) ] ; then
                 echo "**** FAIL: df total($DFTOTAL) mismatch OST total($BKTOTAL)"
                 rc=1
         fi
-        if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] || 
+        if [ $DFFREE -lt $(($BKFREE - $ALLOWANCE)) ] ||
            [ $DFFREE -gt $(($BKFREE + $ALLOWANCE)) ] ; then
                 echo "**** FAIL: df free($DFFREE) mismatch OST free($BKFREE)"
                 rc=2
         fi
-        if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] || 
+        if [ $DFAVAIL -lt $(($BKAVAIL - $ALLOWANCE)) ] ||
            [ $DFAVAIL -gt $(($BKAVAIL + $ALLOWANCE)) ] ; then
                 echo "**** FAIL: df avail($DFAVAIL) mismatch OST avail($BKAVAIL)"
                 rc=3
@@ -1316,7 +1459,7 @@ test_36() { # 12743
 run_test 36 "df report consistency on OSTs with different block size"
 
 test_37() {
-	[ -n "$CLIENTONLY" -o -n "$CLIENTMODSONLY" ] && skip "client only testing" && return 0
+	client_only && skip "client only testing" && return 0
 	LOCAL_MDSDEV="$TMP/mdt.img"
 	SYM_MDSDEV="$TMP/sym_mdt.img"
 
@@ -1358,8 +1501,7 @@ test_38() { # bug 14222
 	log "rename lov_objid file on MDS"
 	rm -f $TMP/lov_objid.orig
 
-	local dev=${SINGLEMDS}_dev
-	local MDSDEV=${!dev}
+	local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 	do_facet $SINGLEMDS "$DEBUGFS -c -R \\\"dump lov_objid $TMP/lov_objid.orig\\\" $MDSDEV"
 	do_facet $SINGLEMDS "$DEBUGFS -w -R \\\"rm lov_objid\\\" $MDSDEV"
 
@@ -1404,7 +1546,7 @@ test_39() {
         PTLDEBUG=+malloc
         setup
         cleanup
-        perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' && 
+        perl $SRCDIR/leak_finder.pl $TMP/debug 2>&1 | egrep '*** Leak:' &&
                 error "memory leak detected" || true
 }
 run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
@@ -1420,12 +1562,11 @@ run_test 40 "race during service thread startup"
 
 test_41() { #bug 14134
         local rc
-        local dev=${SINGLEMDS}_dev
-        local MDSDEV=${!dev}
+        local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 
         start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nosvc -n
         start ost1 `ostdevname 1` $OST_MOUNT_OPTS
-        start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs
+        start $SINGLEMDS $MDSDEV $MDS_MOUNT_OPTS -o nomgs,force
         mkdir -p $MOUNT
         mount_client $MOUNT || return 1
         sleep 5
@@ -1445,7 +1586,7 @@ run_test 41 "mount mds with --nosvc and --nomgs"
 test_42() { #bug 14693
         setup
         check_mount || return 2
-        do_facet client lctl conf_param lustre.llite.some_wrong_param=10
+        do_facet mgs $LCTL conf_param lustre.llite.some_wrong_param=10
         umount_client $MOUNT
         mount_client $MOUNT || return 1
         cleanup
@@ -1453,9 +1594,127 @@ test_42() { #bug 14693
 }
 run_test 42 "invalid config param should not prevent client from mounting"
 
+test_43() {
+    [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
+    setup
+    chmod ugo+x $DIR || error "chmod 0 failed"
+    set_and_check mds                                        \
+        "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"  \
+        "$FSNAME.mdt.root_squash"                            \
+        "0:0"
+    set_and_check mds                                        \
+       "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+       "$FSNAME.mdt.nosquash_nids"                           \
+       "NONE"
+
+    #
+    # create set of test files
+    #
+    echo "111" > $DIR/$tfile-userfile || error "write 1 failed"
+    chmod go-rw $DIR/$tfile-userfile  || error "chmod 1 failed"
+    chown $RUNAS_ID.$RUNAS_ID $DIR/$tfile-userfile || error "chown failed"
+
+    echo "222" > $DIR/$tfile-rootfile || error "write 2 failed"
+    chmod go-rw $DIR/$tfile-rootfile  || error "chmod 2 faield"
+
+    mkdir $DIR/$tdir-rootdir -p       || error "mkdir failed"
+    chmod go-rwx $DIR/$tdir-rootdir   || error "chmod 3 failed"
+    touch $DIR/$tdir-rootdir/tfile-1  || error "touch failed"
+
+    #
+    # check root_squash:
+    #   set root squash UID:GID to RUNAS_ID
+    #   root should be able to access only files owned by RUNAS_ID
+    #
+    set_and_check mds                                        \
+       "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"   \
+       "$FSNAME.mdt.root_squash"                             \
+       "$RUNAS_ID:$RUNAS_ID"
+
+    ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
+    dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
+        error "$ST: root read permission is denied"
+    echo "$ST: root read permission is granted - ok"
+
+    echo "444" | \
+    dd conv=notrunc if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
+        error "$ST: root write permission is denied"
+    echo "$ST: root write permission is granted - ok"
+
+    ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
+    dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null && \
+        error "$ST: root read permission is granted"
+    echo "$ST: root read permission is denied - ok"
+
+    echo "555" | \
+    dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null && \
+        error "$ST: root write permission is granted"
+    echo "$ST: root write permission is denied - ok"
+
+    ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
+    rm $DIR/$tdir-rootdir/tfile-1 1>/dev/null 2>/dev/null && \
+        error "$ST: root unlink permission is granted"
+    echo "$ST: root unlink permission is denied - ok"
+
+    touch $DIR/tdir-rootdir/tfile-2 1>/dev/null 2>/dev/null && \
+        error "$ST: root create permission is granted"
+    echo "$ST: root create permission is denied - ok"
+
+    #
+    # check nosquash_nids:
+    #   put client's NID into nosquash_nids list,
+    #   root should be able to access root file after that
+    #
+    local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
+    NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
+    NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
+    set_and_check mds                                        \
+       "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
+       "$FSNAME-MDTall.mdt.nosquash_nids"                    \
+       "$NIDLIST"
+
+    ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
+    dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
+        error "$ST: root read permission is denied"
+    echo "$ST: root read permission is granted - ok"
+
+    echo "666" | \
+    dd conv=notrunc of=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
+        error "$ST: root write permission is denied"
+    echo "$ST: root write permission is granted - ok"
+
+    ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tdir-rootdir)
+    rm $DIR/$tdir-rootdir/tfile-1 || \
+        error "$ST: root unlink permission is denied"
+    echo "$ST: root unlink permission is granted - ok"
+    touch $DIR/$tdir-rootdir/tfile-2 || \
+        error "$ST: root create permission is denied"
+    echo "$ST: root create permission is granted - ok"
+
+    return 0
+}
+run_test 43 "check root_squash and nosquash_nids"
+
 umount_client $MOUNT
 cleanup_nocli
 
+test_44() { # 16317
+        setup
+        check_mount || return 2
+        UUID=$($LCTL get_param llite.${FSNAME}*.uuid | cut -d= -f2)
+        STATS_FOUND=no
+        UUIDS=$(do_facet mds "$LCTL get_param mdt.${FSNAME}*.exports.*.uuid")
+        for VAL in $UUIDS; do
+                NID=$(echo $VAL | cut -d= -f1)
+                CLUUID=$(echo $VAL | cut -d= -f2)
+                [ "$UUID" = "$CLUUID" ] && STATS_FOUND=yes && break
+        done
+        [ "$STATS_FOUND" = "no" ] && error "stats not found for client"
+        cleanup
+        return 0
+}
+run_test 44 "mounted client proc entry exists"
+
 test_45() { #17310
         setup
         check_mount || return 2
@@ -1476,23 +1735,48 @@ test_45() { #17310
 }
 run_test 45 "long unlink handling in ptlrpcd"
 
+cleanup_46a() {
+	trap 0
+	local rc=0
+	local count=$1
+
+	umount_client $MOUNT2 || rc=$?
+	umount_client $MOUNT || rc=$?
+	while [ $count -gt 0 ]; do
+		stop ost${count} -f || rc=$?
+		let count=count-1
+	done	
+	stop_mds || rc=$? 
+	# writeconf is needed after the test, otherwise,
+	# we might end up with extra OSTs
+	writeconf || rc=$?
+	cleanup_nocli || rc=$?
+	return $rc
+}
+
 test_46a() {
-	OSTCOUNT=6
-	reformat
+	echo "Testing with $OSTCOUNT OSTs"
+	reformat_and_config
 	start_mds || return 1
 	#first client should see only one ost
 	start_ost || return 2
+        wait_osc_import_state mds ost FULL
 	#start_client
 	mount_client $MOUNT || return 3
-	
-	start_ost2 || return 4
-	start ost3 `ostdevname 3` $OST_MOUNT_OPTS || return 5
-	start ost4 `ostdevname 4` $OST_MOUNT_OPTS || return 6
-	start ost5 `ostdevname 5` $OST_MOUNT_OPTS || return 7
-	# wait until ost2-5 is sync
-	# ping_interval + 1
-	sleep $((TIMEOUT / 4 + 1))
-	#second client see both ost's
+	trap "cleanup_46a $OSTCOUNT" EXIT ERR
+
+	local i 
+	for (( i=2; i<=$OSTCOUNT; i++ )); do
+	    start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
+	done
+
+	# wait until osts in sync
+	for (( i=2; i<=$OSTCOUNT; i++ )); do
+	    wait_osc_import_state mds ost$i FULL
+	done
+
+
+	#second client see all ost's
 
 	mount_client $MOUNT2 || return 8
 	$LFS setstripe $MOUNT2 -c -1 || return 9
@@ -1501,21 +1785,15 @@ test_46a() {
 	echo "ok" > $MOUNT2/widestripe
 	$LFS getstripe $MOUNT2/widestripe || return 11
 	# fill acl buffer for avoid expand lsm to them
-	awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd | while read acl; do  
+	awk -F : '{if (FNR < 25) { print "u:"$1":rwx" }}' /etc/passwd | while read acl; do
 	    setfacl -m $acl $MOUNT2/widestripe
 	done
 
 	# will be deadlock
 	stat $MOUNT/widestripe || return 12
 
-	umount_client $MOUNT2 || return 13
-	umount_client $MOUNT || return 14
-	stop ost5 -f || return 20
-	stop ost4 -f || return 21
-	stop ost3 -f || return 22
-	stop_ost2 || return 23
-	stop_ost || return 24
-	stop_mds || return 25
+	cleanup_46a $OSTCOUNT || { echo "cleanup_46a failed!" && return 13; }
+	return 0
 }
 run_test 46a "handle ost additional - wide striped file"
 
@@ -1535,10 +1813,10 @@ test_47() { #17674
             lru_size[count]=$lrs
             let count=count+1
         done
- 
+
         facet_failover ost1
         facet_failover $SINGLEMDS
-        df -h $MOUNT || return 3
+        client_up || return 3
 
         count=0
         for ns in $($LCTL get_param ldlm.namespaces.$FSNAME-*-*-*.lru_size); do
@@ -1558,8 +1836,14 @@ test_47() { #17674
 }
 run_test 47 "server restart does not make client loss lru_resize settings"
 
-# reformat after this test must need - if test will failed
-# we will have unkillable file at FS
+cleanup_48() {
+	trap 0
+
+	# reformat after this test is needed - if test will failed
+	# we will have unkillable file at FS
+	reformat_and_config
+}
+
 test_48() { # bug 17636
 	reformat
 	setup_noconfig
@@ -1570,22 +1854,606 @@ test_48() { # bug 17636
 
 	echo "ok" > $MOUNT/widestripe
 	$LFS getstripe $MOUNT/widestripe || return 11
+
+	trap cleanup_48 EXIT ERR
+
 	# fill acl buffer for avoid expand lsm to them
-	awk -F : '{ print "u:"$1":rwx" }' /etc/passwd | while read acl; do  
+	getent passwd | awk -F : '{ print "u:"$1":rwx" }' |  while read acl; do
 	    setfacl -m $acl $MOUNT/widestripe
 	done
-	awk -F : '{ print "g:"$1":rwx" }' /etc/groups | while read acl; do  
-	    setfacl -m $acl $MOUNT/widestripe
-	done
-
 
 	stat $MOUNT/widestripe || return 12
-	
-	cleanup || error "can't cleanup"
+
+	cleanup_48
 	return 0
 }
 run_test 48 "too many acls on file"
 
+# check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
+test_49() { # bug 17710
+	local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
+	local OLD_OST_MKFS_OPTS=$OST_MKFS_OPTS
+	local LOCAL_TIMEOUT=20
+
+
+	OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$LOCAL_TIMEOUT $MKFSOPT $OSTOPT"
+
+	reformat
+	setup_noconfig
+	check_mount || return 1
+
+	echo "check ldlm_timout..."
+	LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+	LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
+	LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+
+	if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+		error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
+	fi
+
+	if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT / 3)) ]; then
+		error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+	fi
+
+	umount_client $MOUNT
+	stop_ost || return 2
+	stop_mds || return 3
+
+	OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$((LOCAL_TIMEOUT - 1)) $MKFSOPT $OSTOPT"
+
+	reformat
+	setup_noconfig
+	check_mount || return 7
+
+	LDLM_MDS="`do_facet mds lctl get_param -n ldlm_timeout`"
+	LDLM_OST1="`do_facet ost1 lctl get_param -n ldlm_timeout`"
+	LDLM_CLIENT="`do_facet client lctl get_param -n ldlm_timeout`"
+
+	if [ $LDLM_MDS -ne $LDLM_OST1 ] || [ $LDLM_MDS -ne $LDLM_CLIENT ]; then
+		error "Different LDLM_TIMEOUT:$LDLM_MDS $LDLM_OST1 $LDLM_CLIENT"
+	fi
+
+	if [ $LDLM_MDS -ne $((LOCAL_TIMEOUT - 1)) ]; then
+		error "LDLM_TIMEOUT($LDLM_MDS) is not correct"
+	fi
+
+	cleanup || return $?
+
+	MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
+	OST_MKFS_OPTS=$OLD_OST_MKFS_OPTS
+}
+run_test 49 "check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE"
+
+lazystatfs() {
+        # Test both statfs and lfs df and fail if either one fails
+	multiop_bg_pause $1 f_
+	RC1=$?
+	PID=$!
+	killall -USR1 multiop
+	[ $RC1 -ne 0 ] && log "lazystatfs multiop failed"
+	wait $PID || { RC1=$?; log "multiop return error "; }
+
+	$LFS df &
+	PID=$!
+	sleep 5
+	kill -s 0 $PID
+	RC2=$?
+	if [ $RC2 -eq 0 ]; then
+	    kill -s 9 $PID
+	    log "lazystatfs df failed"
+	fi
+
+	RC=0
+	[[ $RC1 -ne 0 || $RC2 -eq 0 ]] && RC=1
+	return $RC
+}
+
+test_50a() {
+	setup
+	lctl set_param llite.$FSNAME-*.lazystatfs=1
+	touch $DIR/$tfile
+
+	lazystatfs $MOUNT || error "lazystatfs failed but no down servers"
+
+	cleanup || return $?
+}
+run_test 50a "lazystatfs all servers available =========================="
+
+test_50b() {
+	setup
+	lctl set_param llite.$FSNAME-*.lazystatfs=1
+	touch $DIR/$tfile
+
+	# Wait for client to detect down OST
+	stop_ost || error "Unable to stop OST1"
+        wait_osc_import_state mds ost DISCONN
+
+	lazystatfs $MOUNT || error "lazystatfs should don't have returned EIO"
+
+	umount_client $MOUNT || error "Unable to unmount client"
+	stop_mds || error "Unable to stop MDS"
+}
+run_test 50b "lazystatfs all servers down =========================="
+
+test_50c() {
+	start_mds || error "Unable to start MDS"
+	start_ost || error "Unable to start OST1"
+	start_ost2 || error "Unable to start OST2"
+	mount_client $MOUNT || error "Unable to mount client"
+	lctl set_param llite.$FSNAME-*.lazystatfs=1
+	touch $DIR/$tfile
+
+	# Wait for client to detect down OST
+	stop_ost || error "Unable to stop OST1"
+        wait_osc_import_state mds ost DISCONN
+	lazystatfs $MOUNT || error "lazystatfs failed with one down server"
+
+ 	umount_client $MOUNT || error "Unable to unmount client"
+	stop_ost2 || error "Unable to stop OST2"
+	stop_mds || error "Unable to stop MDS"
+}
+run_test 50c "lazystatfs one server down =========================="
+
+test_50d() {
+	start_mds || error "Unable to start MDS"
+	start_ost || error "Unable to start OST1"
+	start_ost2 || error "Unable to start OST2"
+	mount_client $MOUNT || error "Unable to mount client"
+	lctl set_param llite.$FSNAME-*.lazystatfs=1
+	touch $DIR/$tfile
+
+	# Issue the statfs during the window where the client still
+	# belives the OST to be available but it is in fact down.
+	# No failure just a statfs which hangs for a timeout interval.
+	stop_ost || error "Unable to stop OST1"
+	lazystatfs $MOUNT || error "lazystatfs failed with one down server"
+
+ 	umount_client $MOUNT || error "Unable to unmount client"
+	stop_ost2 || error "Unable to stop OST2"
+	stop_mds || error "Unable to stop MDS"
+}
+run_test 50d "lazystatfs client/server conn race =========================="
+
+test_50e() {
+	local RC1
+	local pid
+
+	reformat_and_config
+	start_mds || return 1
+	#first client should see only one ost
+	start_ost || return 2
+        wait_osc_import_state mds ost FULL
+
+	# Wait for client to detect down OST
+	stop_ost || error "Unable to stop OST1"
+        wait_osc_import_state mds ost DISCONN
+
+	mount_client $MOUNT || error "Unable to mount client"
+        lctl set_param llite.$FSNAME-*.lazystatfs=0
+
+	multiop_bg_pause $MOUNT _f
+	RC1=$?
+	pid=$!
+
+	if [ $RC1 -ne 0 ]; then
+		log "multiop failed $RC1"
+	else
+	    kill -USR1 $pid
+	    sleep $(( $TIMEOUT+1 ))
+	    kill -0 $pid
+	    [ $? -ne 0 ] && error "process isn't sleep"
+	    start_ost || error "Unable to start OST1"
+	    wait $pid || error "statfs failed"
+	fi
+
+	umount_client $MOUNT || error "Unable to unmount client"
+	stop_ost || error "Unable to stop OST1"
+	stop_mds || error "Unable to stop MDS"
+}
+run_test 50e "normal statfs all servers down =========================="
+
+test_50f() {
+	local RC1
+	local pid
+	CONN_PROC="osc.$FSNAME-OST0001-osc-[M]*.ost_server_uuid"
+
+	start_mds || error "Unable to start mds"
+	#first client should see only one ost
+	start_ost || error "Unable to start OST1"
+        wait_osc_import_state mds ost FULL
+
+        start_ost2 || error "Unable to start OST2"
+        wait_osc_import_state mds ost2 FULL
+
+	# Wait for client to detect down OST
+	stop_ost2 || error "Unable to stop OST2"
+
+	wait_osc_import_state mds ost2 DISCONN
+	mount_client $MOUNT || error "Unable to mount client"
+        lctl set_param llite.$FSNAME-*.lazystatfs=0
+
+	multiop_bg_pause $MOUNT _f
+	RC1=$?
+	pid=$!
+
+	if [ $RC1 -ne 0 ]; then
+		log "lazystatfs multiop failed $RC1"
+	else
+	    kill -USR1 $pid
+	    sleep $(( $TIMEOUT+1 ))
+	    kill -0 $pid
+	    [ $? -ne 0 ] && error "process isn't sleep"
+	    start_ost2 || error "Unable to start OST2"
+	    wait $pid || error "statfs failed"
+	    stop_ost2 || error "Unable to stop OST2"
+	fi
+
+	umount_client $MOUNT || error "Unable to unmount client"
+	stop_ost || error "Unable to stop OST1"
+	stop_mds || error "Unable to stop MDS"
+	writeconf
+}
+run_test 50f "normal statfs one server in down =========================="
+
+test_50g() {
+	[ "$OSTCOUNT" -lt "2" ] && skip_env "$OSTCOUNT < 2, skipping" && return
+	setup
+	start_ost2 || error "Unable to start OST2"
+
+	local PARAM="${FSNAME}-OST0001.osc.active"
+
+	$LFS setstripe -c -1 $DIR/$tfile || error "Unable to lfs setstripe"
+	do_facet mgs $LCTL conf_param $PARAM=0 || error "Unable to deactivate OST"
+
+	umount_client $MOUNT || error "Unable to unmount client"
+	mount_client $MOUNT || error "Unable to mount client"
+	# This df should not cause a panic
+	df -k $MOUNT
+
+	do_facet mgs $LCTL conf_param $PARAM=1 || error "Unable to activate OST"
+	rm -f $DIR/$tfile
+	umount_client $MOUNT || error "Unable to unmount client"
+	stop_ost2 || error "Unable to stop OST2"
+	stop_ost || error "Unable to stop OST1"
+	stop_mds || error "Unable to stop MDS"
+	writeconf
+}
+run_test 50g "deactivated OST should not cause panic====================="
+
+test_51() {
+	local LOCAL_TIMEOUT=20
+
+	reformat
+	setup_noconfig
+	check_mount || return 1
+
+	mkdir $MOUNT/d1
+	$LFS setstripe -c -1 $MOUNT/d1
+        #define OBD_FAIL_MDS_REINT_DELAY         0x142
+	do_facet $SINGLEMDS "lctl set_param fail_loc=0x142"
+	touch $MOUNT/d1/f1 &
+	local pid=$!
+	sleep 2
+	start_ost2 || return 2
+	wait $pid
+	stop_ost2 || return 3
+	cleanup
+}
+run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
+
+copy_files_xattrs()
+{
+	local node=$1
+	local dest=$2
+	local xattrs=$3
+	shift 3
+
+	do_node $node mkdir -p $dest
+	[ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+	do_node $node  'tar cf - '$@' | tar xf - -C '$dest';
+			[ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+	[ $? -eq 0 ] || { error "Unable to tar files"; return 2; }
+
+	do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs
+	[ $? -eq 0 ] || { error "Unable to read xattrs"; return 3; }
+}
+
+diff_files_xattrs()
+{
+	local node=$1
+	local backup=$2
+	local xattrs=$3
+	shift 3
+
+	local backup2=${TMP}/backup2
+
+	do_node $node mkdir -p $backup2
+	[ $? -eq 0 ] || { error "Unable to create directory"; return 1; }
+
+	do_node $node  'tar cf - '$@' | tar xf - -C '$backup2';
+			[ \"\${PIPESTATUS[*]}\" = \"0 0\" ] || exit 1'
+	[ $? -eq 0 ] || { error "Unable to tar files to diff"; return 2; }
+
+	do_node $node "diff -rq $backup $backup2"
+	[ $? -eq 0 ] || { error "contents differ"; return 3; }
+
+	local xattrs2=${TMP}/xattrs2
+	do_node $node 'getfattr -d -m "[a-z]*\\." '$@' > '$xattrs2
+	[ $? -eq 0 ] || { error "Unable to read xattrs to diff"; return 4; }
+
+	do_node $node "diff $xattrs $xattrs2"
+	[ $? -eq 0 ] || { error "xattrs differ"; return 5; }
+
+	do_node $node "rm -rf $backup2 $xattrs2"
+	[ $? -eq 0 ] || { error "Unable to delete temporary files"; return 6; }
+}
+
+test_52() {
+	start_mds
+	[ $? -eq 0 ] || { error "Unable to start MDS"; return 1; }
+	start_ost
+	[ $? -eq 0 ] || { error "Unable to start OST1"; return 2; }
+	mount_client $MOUNT
+	[ $? -eq 0 ] || { error "Unable to mount client"; return 3; }
+
+	local nrfiles=8
+	local ost1mnt=${MOUNT%/*}/ost1
+	local ost1node=$(facet_active_host ost1)
+	local ost1tmp=$TMP/conf52
+
+	mkdir -p $DIR/$tdir
+	[ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
+	touch $TMP/modified_first
+	[ $? -eq 0 ] || { error "Unable to create temporary file"; return 5; }
+	do_node $ost1node "mkdir -p $ost1tmp && touch $ost1tmp/modified_first"
+	[ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
+	sleep 1
+
+	$LFS setstripe $DIR/$tdir -c -1 -s 1M
+	[ $? -eq 0 ] || { error "lfs setstripe failed"; return 7; }
+
+	for (( i=0; i < nrfiles; i++ )); do
+		multiop $DIR/$tdir/$tfile-$i Ow1048576w1048576w524288c
+		[ $? -eq 0 ] || { error "multiop failed"; return 8; }
+		echo -n .
+	done
+	echo
+
+	# backup files
+	echo backup files to $TMP/files
+	local files=$(find $DIR/$tdir -type f -newer $TMP/modified_first)
+	copy_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+	[ $? -eq 0 ] || { error "Unable to copy files"; return 9; }
+
+	umount_client $MOUNT
+	[ $? -eq 0 ] || { error "Unable to umount client"; return 10; }
+	stop_ost
+	[ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
+
+	echo mount ost1 as ldiskfs
+	do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
+	[ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
+
+	# backup objects
+	echo backup objects to $ost1tmp/objects
+	local objects=$(do_node $ost1node 'find '$ost1mnt'/O/0 -type f -size +0'\
+			'-newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
+	copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+	[ $? -eq 0 ] || { error "Unable to copy objects"; return 13; }
+
+	# move objects to lost+found
+	do_node $ost1node 'mv '$objects' '${ost1mnt}'/lost+found'
+	[ $? -eq 0 ] || { error "Unable to move objects"; return 14; }
+
+	# recover objects
+	do_node $ost1node "ll_recover_lost_found_objs -d $ost1mnt/lost+found"
+	[ $? -eq 0 ] || { error "ll_recover_lost_found_objs failed"; return 15; }
+
+	# compare restored objects against saved ones
+	diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+	[ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
+
+	do_node $ost1node "umount $ost1_dev"
+	[ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
+
+	start_ost
+	[ $? -eq 0 ] || { error "Unable to start ost1"; return 18; }
+	mount_client $MOUNT
+	[ $? -eq 0 ] || { error "Unable to mount client"; return 19; }
+
+	# compare files
+	diff_files_xattrs `hostname` $TMP/files $TMP/file_xattrs $files
+	[ $? -eq 0 ] || { error "Unable to diff files"; return 20; }
+
+	rm -rf $TMP/files $TMP/file_xattrs
+	[ $? -eq 0 ] || { error "Unable to delete temporary files"; return 21; }
+	do_node $ost1node "rm -rf $ost1tmp"
+	[ $? -eq 0 ] || { error "Unable to delete temporary files"; return 22; }
+	cleanup
+}
+run_test 52 "check recovering objects from lost+found"
+
+# Checks threads_min/max/started for some service
+#
+# Arguments: service name (OST or MDT), facet (e.g., ost1, $SINGLEMDS), and a
+# parameter pattern prefix like 'ost.*.ost'.
+thread_sanity() {
+        local modname=$1
+        local facet=$2
+        local parampat=$3
+        local opts=$4
+        local tmin
+        local tmin2
+        local tmax
+        local tmax2
+        local tstarted
+        local paramp
+        local msg="Insane $modname thread counts"
+        shift 4
+
+        setup
+        check_mount || return 41
+
+        # We need to expand $parampat, but it may match multiple parameters, so
+        # we'll pick the first one
+        if ! paramp=$(do_facet $facet "lctl get_param -N ${parampat}.threads_min"|head -1); then
+                error "Couldn't expand ${parampat}.threads_min parameter name"
+                return 22
+        fi
+
+        # Remove the .threads_min part
+        paramp=${paramp%.threads_min}
+
+        # Check for sanity in defaults
+        tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+        tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+        tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started" || echo 0)
+        lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
+        lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= tmax ))' || return $?
+
+        # Check that we can lower min/max
+        do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin - 1))"
+        do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 10))"
+        tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+        tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+        lassert 25 "$msg" '(($tmin2 == ($tmin - 1) && $tmax2 == ($tmax -10)))' || return $?
+
+        # Check that we can set min/max to the same value
+        do_facet $facet "lctl set_param ${paramp}.threads_min=$tmin"
+        do_facet $facet "lctl set_param ${paramp}.threads_max=$tmin"
+        tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+        tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+        lassert 26 "$msg" '(($tmin2 == $tmin && $tmax2 == $tmin))' || return $?
+
+        # Check that we can't set max < min
+        do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmin - 1))"
+        tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+        tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+        lassert 27 "$msg" '(($tmin <= $tmax2))' || return $?
+
+        # We need to ensure that we get the module options desired; to do this
+        # we set LOAD_MODULES_REMOTE=true and we call setmodopts below.
+        LOAD_MODULES_REMOTE=true
+        cleanup
+        local oldvalue
+        setmodopts -a $modname "$opts" oldvalue
+
+        load_modules
+        setup
+        check_mount || return 41
+
+        # Restore previous setting of MODOPTS_*
+        setmodopts $modname "$oldvalue"
+
+        # Check that $opts took
+        tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min")
+        tmax=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max")
+        tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started")
+        lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
+        cleanup
+
+        # Workaround a YALA bug where YALA expects that modules will remain
+        # loaded on the servers
+        LOAD_MODULES_REMOTE=false
+        load_modules
+        setup
+        cleanup
+}
+
+test_53a() {
+        thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads=64'
+}
+run_test 53a "check OSS thread count params"
+
+test_53b() {
+        thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads=64'
+}
+run_test 53b "check MDT thread count params"
+
+if ! combined_mgs_mds ; then
+	stop mgs
+fi
+
+run_llverfs()
+{
+        local dir=$1
+        local partial_arg=""
+        local size=$(df -B G $dir | tail -1 | awk '{print $2}' | sed 's/G//') # Gb
+
+        # Run in partial (fast) mode if the size
+        # of a partition > 10 GB
+        [ $size -gt 10 ] && partial_arg="-p"
+
+        llverfs $partial_arg $dir
+}
+
+test_54a() {
+    do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1)
+    [ $? -eq 0 ] || error "llverdev failed!"
+    reformat_and_config
+}
+run_test 54a "llverdev"
+
+test_54b() {
+    setup
+    run_llverfs $MOUNT
+    [ $? -eq 0 ] || error "llverfs failed!"
+    cleanup
+}
+run_test 54b "llverfs"
+
+lov_objid_size()
+{
+	local max_ost_index=$1
+	echo -n $(((max_ost_index + 1) * 8))
+}
+
+test_55() {
+	local mdsdev=$(mdsdevname 1)
+	local ostdev=$(ostdevname 1)
+	local saved_opts=$OST_MKFS_OPTS
+
+	for i in 0 1023 2048
+	do
+		OST_MKFS_OPTS="$saved_opts --index $i"
+		reformat
+
+		setup_noconfig
+		stopall
+
+		setup
+		sync
+		echo checking size of lov_objid for ost index $i
+		LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" | grep ^User | awk '{print $6}')
+		if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
+			error "lov_objid size has to be $(lov_objid_size $i), not $LOV_OBJID_SIZE"
+		else
+			echo ok, lov_objid size is correct: $LOV_OBJID_SIZE
+		fi
+		stopall
+	done
+
+	OST_MKFS_OPTS=$saved_opts
+	reformat
+}
+run_test 55 "check lov_objid size"
+
+test_56() {
+	add mds1 $MDS_MKFS_OPTS --mkfsoptions='\"-J size=16\"' --reformat $(mdsdevname 1)
+	add ost1 $OST_MKFS_OPTS --index=1000 --reformat $(ostdevname 1)
+	add ost2 $OST_MKFS_OPTS --index=10000 --reformat $(ostdevname 2)
+
+	start_mds
+	start_ost
+	start_ost2 || error "Unable to start second ost"
+	mount_client $MOUNT || error "Unable to mount client"
+	echo ok
+	$LFS osts
+	stopall
+	reformat
+}
+run_test 56 "check big indexes"
 
 cleanup_gss
 equals_msg `basename $0`: test complete