X-Git-Url: https://git.whamcloud.com/?p=fs%2Flustre-release.git;a=blobdiff_plain;f=lustre%2Ftests%2Fconf-sanity.sh;h=63c9aaa4c744dd3dfee843450e5a0d652299e8b3;hp=13a6bfd2e8257908b3c8ee63109d45a9dc0579b3;hb=0302cc9dc33a2c8cc013bd117d5b738fe3ae1a76;hpb=9ab78a5bec154492c70f780706d9eaebeaaa5e54

diff --git a/lustre/tests/conf-sanity.sh b/lustre/tests/conf-sanity.sh
index 13a6bfd..63c9aaa4 100644
--- a/lustre/tests/conf-sanity.sh
+++ b/lustre/tests/conf-sanity.sh
@@ -1,6 +1,4 @@
 #!/bin/bash
-# -*- mode: Bash; tab-width: 4; indent-tabs-mode: t; -*-
-# vim:autoindent:shiftwidth=4:tabstop=4:
 
 # FIXME - there is no reason to use all of these different
 #   return codes, espcially when most of them are mapped to something
@@ -12,16 +10,38 @@ set -e
 ONLY=${ONLY:-"$*"}
 
 # bug number for skipped test:
-#               15977
 ALWAYS_EXCEPT="$CONF_SANITY_EXCEPT"
 # UPDATE THE COMMENT ABOVE WITH BUG NUMBERS WHEN CHANGING ALWAYS_EXCEPT!
 
+is_sles11()						# LU-2181
+{
+	if [ -r /etc/SuSE-release ]
+	then
+		local vers=`grep VERSION /etc/SuSE-release | awk '{print $3}'`
+		local patchlev=`grep PATCHLEVEL /etc/SuSE-release \
+			| awk '{print $3}'`
+		if [ $vers -eq 11 ] && [ $patchlev -eq 2 ]
+		then
+			return 0
+		fi
+	fi
+	return 1
+}
+
+if is_sles11; then					# LU-2181
+	ALWAYS_EXCEPT="$ALWAYS_EXCEPT 23a 34b"
+fi
+
 if [ "$FAILURE_MODE" = "HARD" ]; then
 	CONFIG_EXCEPTIONS="24a " && \
 	echo "Except the tests: $CONFIG_EXCEPTIONS for FAILURE_MODE=$FAILURE_MODE, bug 23573" && \
 	ALWAYS_EXCEPT="$ALWAYS_EXCEPT $CONFIG_EXCEPTIONS"
 fi
 
+# bug number for skipped test:
+# a tool to create lustre filesystem images
+ALWAYS_EXCEPT="32newtarball $ALWAYS_EXCEPT"
+
 SRCDIR=`dirname $0`
 PATH=$PWD/$SRCDIR:$SRCDIR:$SRCDIR/../utils:$PATH
 
@@ -29,6 +49,7 @@ PTLDEBUG=${PTLDEBUG:--1}
 SAVE_PWD=$PWD
 LUSTRE=${LUSTRE:-`dirname $0`/..}
 RLUSTRE=${RLUSTRE:-$LUSTRE}
+export MULTIOP=${MULTIOP:-multiop}
 
 . $LUSTRE/tests/test-framework.sh
 init_test_env $@
@@ -49,6 +70,11 @@ if [ -n "$MDSSIZE" ]; then
     STORED_MDSSIZE=$MDSSIZE
 fi
 
+# pass "-E lazy_itable_init" to mke2fs to speed up the formatting time
+if [[ "$LDISKFS_MKFS_OPTS" != *lazy_itable_init* ]]; then
+	LDISKFS_MKFS_OPTS=$(csa_add "$LDISKFS_MKFS_OPTS" -E lazy_itable_init)
+fi
+
 init_logging
 
 #
@@ -60,31 +86,6 @@ require_dsh_ost || exit 0
 
 assert_DIR
 
-reformat() {
-        formatall
-}
-
-writeconf1() {
-	local facet=$1
-	local dev=$2
-
-	stop ${facet} -f
-	rm -f ${facet}active
-	# who knows if/where $TUNEFS is installed?  Better reformat if it fails...
-	do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" ||
-		{ echo "tunefs failed, reformatting instead" && reformat_and_config && return 1; }
-	return 0
-}
-
-writeconf() {
-	# we need ldiskfs
-	load_modules
-	# if writeconf fails anywhere, we reformat everything
-	writeconf1 mds `mdsdevname 1` || return 0
-	writeconf1 ost1 `ostdevname 1` || return 0
-	writeconf1 ost2 `ostdevname 2` || return 0
-}
-
 gen_config() {
 	# The MGS must be started before the OSTs for a new fs, so start
 	# and stop to generate the startup logs.
@@ -103,20 +104,54 @@ reformat_and_config() {
 	gen_config
 }
 
+writeconf_or_reformat() {
+	# There are at most 2 OSTs for write_conf test
+	# who knows if/where $TUNEFS is installed?
+	# Better reformat if it fails...
+	writeconf_all $MDSCOUNT 2 ||
+		{ echo "tunefs failed, reformatting instead" &&
+		  reformat_and_config && return 1; }
+	return 0
+}
+
+reformat() {
+        formatall
+}
+
 start_mgs () {
 	echo "start mgs"
 	start mgs $MGSDEV $MGS_MOUNT_OPTS
 }
 
-start_mds() {
-	local facet=$SINGLEMDS
-	# we can not use MDSDEV1 here because SINGLEMDS could be set not to mds1 only
-	local num=$(echo $facet | tr -d "mds")
+start_mdt() {
+	local num=$1
+	local facet=mds$num
 	local dev=$(mdsdevname $num)
+	shift 1
+
 	echo "start mds service on `facet_active_host $facet`"
 	start $facet ${dev} $MDS_MOUNT_OPTS $@ || return 94
 }
 
+stop_mdt() {
+	local num=$1
+	local facet=mds$num
+	local dev=$(mdsdevname $num)
+	shift 1
+
+	echo "stop mds service on `facet_active_host $facet`"
+	# These tests all use non-failover stop
+	stop $facet -f  || return 97
+}
+
+start_mds() {
+	local num
+
+	for num in $(seq $MDSCOUNT); do
+		start_mdt $num $@ || return 94
+	done
+}
+
 start_mgsmds() {
 	if ! combined_mgs_mds ; then
 		start_mgs
@@ -125,9 +160,10 @@ start_mgsmds() {
 }
 
 stop_mds() {
-	echo "stop mds service on `facet_active_host $SINGLEMDS`"
-	# These tests all use non-failover stop
-	stop $SINGLEMDS -f  || return 97
+	local num
+	for num in $(seq $MDSCOUNT); do
+		stop_mdt $num || return 97
+	done
 }
 
 stop_mgs() {
@@ -190,6 +226,7 @@ setup() {
 	start_mds || error "MDT start failed"
 	start_ost || error "OST start failed"
 	mount_client $MOUNT || error "client start failed"
+	client_up || error "client_up failed"
 }
 
 setup_noconfig() {
@@ -215,7 +252,7 @@ cleanup_nocli() {
 }
 
 cleanup() {
- 	umount_client $MOUNT || return 200
+	umount_client $MOUNT || return 200
 	cleanup_nocli || return $?
 }
 
@@ -273,9 +310,9 @@ test_1() {
 run_test 1 "start up ost twice (should return errors)"
 
 test_2() {
-	start_mds
+	start_mdt 1
 	echo "start mds second time.."
-	start_mds && error "2nd MDT start should fail"
+	start_mdt 1 && error "2nd MDT start should fail"
 	start_ost
 	mount_client $MOUNT
 	check_mount || return 43
@@ -316,7 +353,7 @@ test_5a() {	# was test_5
 	# cleanup may return an error from the failed
 	# disconnects; for now I'll consider this successful
 	# if all the modules have unloaded.
- 	umount -d $MOUNT &
+	umount -d $MOUNT &
 	UMOUNT_PID=$!
 	sleep 6
 	echo "killing umount"
@@ -347,7 +384,7 @@ test_5a() {	# was test_5
 	while [ "$WAIT" -ne "$MAX_WAIT" ]; do
 		sleep $sleep
 		grep -q $MOUNT" " /etc/mtab || break
-        	echo "Waiting /etc/mtab updated ... "
+		echo "Waiting /etc/mtab updated ... "
 		WAIT=$(( WAIT + sleep))
 	done
 	[ "$WAIT" -eq "$MAX_WAIT" ] && error "/etc/mtab is not updated in $WAIT secs"
@@ -410,6 +447,9 @@ test_5d() {
 	grep " $MOUNT " /etc/mtab && \
 		error false "unexpected entry in mtab before mount" && return 10
 
+	[ "$(facet_fstype ost1)" = "zfs" ] &&
+		skip "LU-2059: no local config for ZFS OSTs" && return
+
 	local rc=0
 	start_ost
 	start_mds
@@ -554,6 +594,11 @@ is_blkdev () {
 #
 
 test_17() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
         setup
         check_mount || return 41
         cleanup || return $?
@@ -576,7 +621,10 @@ test_17() {
 run_test 17 "Verify failed mds_postsetup won't fail assertion (2936) (should return errs)"
 
 test_18() {
-        [ "$FSTYPE" != "ldiskfs" ] && skip "not needed for FSTYPE=$FSTYPE" && return
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
 
         local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
 
@@ -593,8 +641,14 @@ test_18() {
                 log "use STORED_MDSSIZE=$STORED_MDSSIZE"
 
         # check if the block device is large enough
-        [ -z "$OK" ] && $(is_blkdev $SINGLEMDS $MDSDEV $MIN) && OK=1 &&
-                myMDSSIZE=$MIN && log "use device $MDSDEV with MIN=$MIN"
+	is_blkdev $SINGLEMDS $MDSDEV $MIN
+	local large_enough=$?
+	if [ -n "$OK" ]; then
+		[ $large_enough -ne 0 ] && OK=""
+	else
+		[ $large_enough -eq 0 ] && OK=1 && myMDSSIZE=$MIN &&
+			log "use device $MDSDEV with MIN=$MIN"
+	fi
 
         # check if a loopback device has enough space for fs metadata (5%)
 
@@ -610,15 +664,9 @@ test_18() {
 
 
         echo "mount mds with large journal..."
-        local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
 
-        local opts="--mdt --fsname=$FSNAME --device-size=$myMDSSIZE --param sys.timeout=$TIMEOUT $MDSOPT"
-
-        if combined_mgs_mds ; then
-            MDS_MKFS_OPTS="--mgs $opts"
-        else
-            MDS_MKFS_OPTS="--mgsnode=$MGSNID $opts"
-        fi
+	local OLD_MDSSIZE=$MDSSIZE
+	MDSSIZE=$myMDSSIZE
 
         reformat_and_config
         echo "mount lustre system..."
@@ -635,8 +683,8 @@ test_18() {
 
         cleanup || return $?
 
-        MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
-        reformat_and_config
+	MDSSIZE=$OLD_MDSSIZE
+	reformat_and_config
 }
 run_test 18 "check mkfs creates large journals"
 
@@ -647,6 +695,9 @@ test_19a() {
 run_test 19a "start/stop MDS without OSTs"
 
 test_19b() {
+	[ "$(facet_fstype ost1)" = "zfs" ] &&
+		skip "LU-2059: no local config for ZFS OSTs" && return
+
 	start_ost || return 1
 	stop_ost -f || return 2
 }
@@ -683,6 +734,9 @@ test_21a() {
 run_test 21a "start mds before ost, stop ost first"
 
 test_21b() {
+	[ "$(facet_fstype ost1)" = "zfs" ] &&
+		skip "LU-2059: no local config for ZFS OSTs" && return
+
         start_ost
 	start_mds
         wait_osc_import_state mds ost FULL
@@ -700,7 +754,7 @@ test_21c() {
 	stop_ost2
 	stop_mds
 	#writeconf to remove all ost2 traces for subsequent tests
-	writeconf
+	writeconf_or_reformat
 }
 run_test 21c "start mds between two osts, stop mds last"
 
@@ -722,16 +776,23 @@ test_21d() {
         stop_ost2
         stop_mds
         stop_mgs
+        #writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
+        start_mgs
 }
 run_test 21d "start mgs then ost and then mds"
 
 test_22() {
+	local num
+
 	start_mds
 
 	echo Client mount with ost in logs, but none running
 	start_ost
 	# wait until mds connected to ost and open client connection
-        wait_osc_import_state mds ost FULL
+	for num in $(seq 1 $MDSCOUNT); do
+		wait_osc_import_state mds${num} ost FULL
+	done
 	stop_ost
 	mount_client $MOUNT
 	# check_mount will block trying to contact ost
@@ -751,6 +812,10 @@ test_22() {
 		sleep $((TIMEOUT + TIMEOUT + TIMEOUT))
 	fi
 	mount_client $MOUNT
+	for num in $(seq 1 $MDSCOUNT); do
+		wait_osc_import_state mds${num} ost FULL
+	done
+	wait_osc_import_state client ost FULL
 	check_mount || return 41
 	pass
 
@@ -764,10 +829,10 @@ test_23a() {	# was test_23
 	stop $SINGLEMDS
 	# force down client so that recovering mds waits for reconnect
 	local running=$(grep -c $MOUNT /proc/mounts) || true
-    	if [ $running -ne 0 ]; then
-        	echo "Stopping client $MOUNT (opts: -f)"
-        	umount -f $MOUNT
-    	fi
+	if [ $running -ne 0 ]; then
+		echo "Stopping client $MOUNT (opts: -f)"
+		umount -f $MOUNT
+	fi
 
 	# enter recovery on mds
 	start_mds
@@ -779,10 +844,12 @@ test_23a() {	# was test_23
 	echo mount pid is ${MOUNT_PID}, mount.lustre pid is ${MOUNT_LUSTRE_PID}
 	ps --ppid $MOUNT_PID
 	ps --ppid $MOUNT_LUSTRE_PID
-	# FIXME why o why can't I kill these? Manual "ctrl-c" works...
-	kill -TERM $MOUNT_LUSTRE_PID
 	echo "waiting for mount to finish"
 	ps -ef | grep mount
+	# "ctrl-c" sends SIGINT but it usually (in script) does not work on child process
+	# SIGTERM works but it does not spread to offspring processses
+	kill -s TERM $MOUNT_PID
+	kill -s TERM $MOUNT_LUSTRE_PID
 	# we can not wait $MOUNT_PID because it is not a child of this shell
 	local PID1
 	local PID2
@@ -825,6 +892,10 @@ run_test 23b "Simulate -EINTR during mount"
 fs2mds_HOST=$mds_HOST
 fs2ost_HOST=$ost_HOST
 
+MDSDEV1_2=$fs2mds_DEV
+OSTDEV1_2=$fs2ost_DEV
+OSTDEV2_2=$fs3ost_DEV
+
 cleanup_24a() {
 	trap 0
 	echo "umount $MOUNT2 ..."
@@ -845,14 +916,19 @@ test_24a() {
 
 	[ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
 
-	local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
-	local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
+	local fs2mdsdev=$(mdsdevname 1_2)
+	local fs2ostdev=$(ostdevname 1_2)
+	local fs2mdsvdev=$(mdsvdevname 1_2)
+	local fs2ostvdev=$(ostvdevname 1_2)
 
 	# test 8-char fsname as well
 	local FSNAME2=test1234
-	add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --nomgs --mgsnode=$MGSNID --reformat $fs2mdsdev || exit 10
 
-	add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2ostdev || exit 10
+	add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --nomgs --mgsnode=$MGSNID \
+		--fsname=${FSNAME2} --reformat $fs2mdsdev $fs2mdsvdev || exit 10
+
+	add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --fsname=${FSNAME2} \
+		--reformat $fs2ostdev $fs2ostvdev || exit 10
 
 	setup
 	start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
@@ -875,7 +951,7 @@ test_24a() {
 	facet_failover fs2mds
 	facet_failover fs2ost
 	df
- 	umount_client $MOUNT
+	umount_client $MOUNT
 	# the MDS must remain up until last MDT
 	stop_mds
 	MDS=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
@@ -895,9 +971,11 @@ test_24b() {
 		skip_env "mixed loopback and real device not working" && return
 	fi
 
-	local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
+	local fs2mdsdev=$(mdsdevname 1_2)
+	local fs2mdsvdev=$(mdsvdevname 1_2)
 
-	add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME}2 --mgs --reformat $fs2mdsdev || exit 10
+	add fs2mds $(mkfs_opts mds1 ${fs2mdsdev} ) --mgs --fsname=${FSNAME}2 \
+		--reformat $fs2mdsdev $fs2mdsvdev || exit 10
 	setup
 	start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && return 2
 	cleanup || return 6
@@ -923,45 +1001,41 @@ test_26() {
     lctl get_param -n devices
     DEVS=$(lctl get_param -n devices | egrep -v MG | wc -l)
     [ $DEVS -gt 0 ] && return 2
+    # start mds to drop writeconf setting
+    start_mds || return 3
+    stop_mds || return 4
     unload_modules_conf || return $?
 }
 run_test 26 "MDT startup failure cleans LOV (should return errs)"
 
-set_and_check() {
-	local myfacet=$1
-	local TEST=$2
-	local PARAM=$3
-	local ORIG=$(do_facet $myfacet "$TEST")
-	if [ $# -gt 3 ]; then
-	    local FINAL=$4
-	else
-	    local -i FINAL
-	    FINAL=$(($ORIG + 5))
-	fi
-	echo "Setting $PARAM from $ORIG to $FINAL"
-	do_facet $SINGLEMDS "$LCTL conf_param $PARAM='$FINAL'" || error conf_param failed
-
-	wait_update $(facet_host $myfacet) "$TEST" "$FINAL" || error check failed!
-}
-
 test_27a() {
+	[ "$(facet_fstype ost1)" = "zfs" ] &&
+		skip "LU-2059: no local config for ZFS OSTs" && return
+
 	start_ost || return 1
 	start_mds || return 2
 	echo "Requeue thread should have started: "
 	ps -e | grep ll_cfg_requeue
-	set_and_check ost1 "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
+	set_conf_param_and_check ost1					      \
+	   "lctl get_param -n obdfilter.$FSNAME-OST0000.client_cache_seconds" \
+	   "$FSNAME-OST0000.ost.client_cache_seconds" || return 3
 	cleanup_nocli
 }
 run_test 27a "Reacquire MGS lock if OST started first"
 
 test_27b() {
 	# FIXME. ~grev
-        setup
-        local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }')
+	setup
+	local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" |
+			awk '($3 ~ "mdt" && $4 ~ "MDT0000") { print $4 }')
 
 	facet_failover $SINGLEMDS
-	set_and_check $SINGLEMDS "lctl get_param -n mdt.$device.identity_acquire_expire" "$device.mdt.identity_acquire_expire" || return 3
-	set_and_check client "lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight" "$device.mdc.max_rpcs_in_flight" || return 4
+	set_conf_param_and_check $SINGLEMDS				\
+		"lctl get_param -n mdt.$device.identity_acquire_expire"	\
+		"$device.mdt.identity_acquire_expire" || return 3
+	set_conf_param_and_check client					\
+		"lctl get_param -n mdc.$device-mdc-*.max_rpcs_in_flight"\
+		"$device.mdc.max_rpcs_in_flight" || return 4
 	check_mount
 	cleanup
 }
@@ -973,10 +1047,10 @@ test_28() {
 	PARAM="$FSNAME.llite.max_read_ahead_whole_mb"
 	ORIG=$($TEST)
 	FINAL=$(($ORIG + 1))
-	set_and_check client "$TEST" "$PARAM" $FINAL || return 3
+	set_conf_param_and_check client "$TEST" "$PARAM" $FINAL || return 3
 	FINAL=$(($FINAL + 1))
-	set_and_check client "$TEST" "$PARAM" $FINAL || return 4
- 	umount_client $MOUNT || return 200
+	set_conf_param_and_check client "$TEST" "$PARAM" $FINAL || return 4
+	umount_client $MOUNT || return 200
 	mount_client $MOUNT
 	RESULT=$($TEST)
 	if [ $RESULT -ne $FINAL ]; then
@@ -985,7 +1059,7 @@ test_28() {
 	else
 	    echo "New config success: got $RESULT"
 	fi
-	set_and_check client "$TEST" "$PARAM" $ORIG || return 5
+	set_conf_param_and_check client "$TEST" "$PARAM" $ORIG || return 5
 	cleanup
 }
 run_test 28 "permanent parameter setting"
@@ -1002,7 +1076,8 @@ test_29() {
 
         ACTV=$(lctl get_param -n $PROC_ACT)
 	DEAC=$((1 - $ACTV))
-	set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
+	set_conf_param_and_check client \
+		"lctl get_param -n $PROC_ACT" "$PARAM" $DEAC || return 2
         # also check ost_server_uuid status
 	RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV)
 	if [ -z "$RESULT" ]; then
@@ -1012,33 +1087,32 @@ test_29() {
 	    echo "Live client success: got $RESULT"
 	fi
 
-	# check MDT too
-	local mdtosc=$(get_mdtosc_proc_path $SINGLEMDS $FSNAME-OST0001)
-	mdtosc=${mdtosc/-MDT*/-MDT\*}
-	local MPROC="osc.$mdtosc.active"
-	local MAX=30
-	local WAIT=0
-	while [ 1 ]; do
-	    sleep 5
-	    RESULT=`do_facet $SINGLEMDS " lctl get_param -n $MPROC"`
-	    [ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
-	    if [ $RESULT -eq $DEAC ]; then
-		echo "MDT deactivated also after $WAIT sec (got $RESULT)"
-		break
-	    fi
-	    WAIT=$((WAIT + 5))
-	    if [ $WAIT -eq $MAX ]; then
-		echo "MDT not deactivated: wanted $DEAC got $RESULT"
-		return 4
-	    fi
-	    echo "Waiting $(($MAX - $WAIT)) secs for MDT deactivated"
+	# check MDTs too
+	for num in $(seq $MDSCOUNT); do
+		local mdtosc=$(get_mdtosc_proc_path mds${num} $FSNAME-OST0001)
+		local MPROC="osc.$mdtosc.active"
+		local MAX=30
+		local WAIT=0
+		while [ 1 ]; do
+			sleep 5
+			RESULT=$(do_facet mds${num} " lctl get_param -n $MPROC")
+			[ ${PIPESTATUS[0]} = 0 ] || error "Can't read $MPROC"
+			if [ $RESULT -eq $DEAC ]; then
+				echo -n "MDT deactivated also after"
+				echo "$WAIT sec (got $RESULT)"
+				break
+			fi
+			WAIT=$((WAIT + 5))
+			if [ $WAIT -eq $MAX ]; then
+				echo -n "MDT not deactivated: wanted $DEAC"
+				echo  "got $RESULT"
+				return 4
+			fi
+			echo "Waiting $(($MAX - $WAIT))secs for MDT deactivated"
+		done
 	done
-
-        # quotacheck should not fail immediately after deactivate
-	[ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
-
         # test new client starts deactivated
- 	umount_client $MOUNT || return 200
+	umount_client $MOUNT || return 200
 	mount_client $MOUNT
 	RESULT=$(lctl get_param -n $PROC_UUID | grep DEACTIV | grep NEW)
 	if [ -z "$RESULT" ]; then
@@ -1048,17 +1122,15 @@ test_29() {
 	    echo "New client success: got $RESULT"
 	fi
 
-        # quotacheck should not fail after umount/mount operation
-	[ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
-
 	# make sure it reactivates
-	set_and_check client "lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
+	set_conf_param_and_check client \
+		"lctl get_param -n $PROC_ACT" "$PARAM" $ACTV || return 6
 
- 	umount_client $MOUNT
+	umount_client $MOUNT
 	stop_ost2
 	cleanup_nocli
 	#writeconf to remove all ost2 traces for subsequent tests
-	writeconf
+	writeconf_or_reformat
 }
 run_test 29 "permanently remove an OST"
 
@@ -1070,10 +1142,11 @@ test_30a() {
 	ORIG=$($TEST)
 	LIST=(1 2 3 4 5 4 3 2 1 2 3 4 5 4 3 2 1 2 3 4 5)
 	for i in ${LIST[@]}; do
-	    set_and_check client "$TEST" "$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
+		set_conf_param_and_check client "$TEST" \
+			"$FSNAME.llite.max_read_ahead_whole_mb" $i || return 3
 	done
 	# make sure client restart still works
- 	umount_client $MOUNT
+	umount_client $MOUNT
 	mount_client $MOUNT || return 4
 	[ "$($TEST)" -ne "$i" ] && error "Param didn't stick across restart $($TEST) != $i"
 	pass
@@ -1104,7 +1177,9 @@ test_30b() {
 	echo "Using fake nid $NEW"
 
 	TEST="$LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids | sed -n 's/.*\($NEW\).*/\1/p'"
-	set_and_check client "$TEST" "$FSNAME-OST0000.failover.node" $NEW || error "didn't add failover nid $NEW"
+	set_conf_param_and_check client "$TEST" \
+		"$FSNAME-OST0000.failover.node" $NEW ||
+		error "didn't add failover nid $NEW"
 	NIDS=$($LCTL get_param -n osc.$FSNAME-OST0000-osc-[^M]*.import | grep failover_nids)
 	echo $NIDS
 	NIDCOUNT=$(($(echo "$NIDS" | wc -w) - 1))
@@ -1131,194 +1206,536 @@ test_31() { # bug 10734
 }
 run_test 31 "Connect to non-existent node (shouldn't crash)"
 
-# Use these start32/stop32 fn instead of t-f start/stop fn,
-# for local devices, to skip global facet vars init
-stop32 () {
-	local facet=$1
-	shift
-	echo "Stopping local ${MOUNT%/*}/${facet} (opts:$@)"
-	umount -d $@ ${MOUNT%/*}/${facet}
-	losetup -a
-}
-
-start32 () {
-	local facet=$1
-	shift
-	local device=$1
-	shift
-	mkdir -p ${MOUNT%/*}/${facet}
-
-	echo "Starting local ${facet}: $@ $device ${MOUNT%/*}/${facet}"
-	mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}
-	local RC=$?
-	if [ $RC -ne 0 ]; then
-		echo "mount -t lustre $@ ${device} ${MOUNT%/*}/${facet}"
-		echo "Start of ${device} of local ${facet} failed ${RC}"
-	fi
-	losetup -a
-	return $RC
-}
+#
+# This is not really a test but a tool to create new disk
+# image tarballs for the upgrade tests.
+#
+# Disk image tarballs should be created on single-node
+# clusters by running this test with default configurations
+# plus a few mandatory environment settings that are verified
+# at the beginning of the test.
+#
+test_32newtarball() {
+	local version
+	local dst=.
+	local src=/etc/rc.d
+	local tmp=$TMP/t32_image_create
+
+	if [ $FSNAME != t32fs -o $MDSCOUNT -ne 1 -o								\
+		 \( -z "$MDSDEV" -a -z "$MDSDEV1" \) -o $OSTCOUNT -ne 1 -o			\
+		 -z "$OSTDEV1" ]; then
+		error "Needs FSNAME=t32fs MDSCOUNT=1 MDSDEV1=<nonexistent_file>"	\
+			  "(or MDSDEV, in the case of b1_8) OSTCOUNT=1"					\
+			  "OSTDEV1=<nonexistent_file>"
+	fi
 
-cleanup_nocli32 () {
-	stop32 mds1 -f
-	stop32 ost1 -f
-	wait_exit_ST client
-}
+	mkdir $tmp || {
+		echo "Found stale $tmp"
+		return 1
+	}
 
-cleanup_32() {
-	trap 0
-	echo "Cleanup test_32 umount $MOUNT ..."
-	umount -f $MOUNT || true
-	echo "Cleanup local mds ost1 ..."
-	cleanup_nocli32
-	combined_mgs_mds || start_mgs
-	unload_modules_conf
-}
+	mkdir $tmp/src
+	tar cf - -C $src . | tar xf - -C $tmp/src
 
-test_32a() {
-	client_only && skip "client only testing" && return 0
-	[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
-	[ -z "$TUNEFS" ] && skip_env "No tunefs" && return 0
+	formatall
 
-	local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
-	[ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
-	local tmpdir=$TMP/conf32a
-	mkdir -p $tmpdir
-	tar xjvf $DISK1_8 -C $tmpdir || \
-		{ skip_env "Cannot untar $DISK1_8" && return 0; }
+	setupall
+	tar cf - -C $tmp/src . | tar xf - -C /mnt/$FSNAME
+	stopall
 
-	load_modules
-	$LCTL set_param debug=$PTLDEBUG
+	mkdir $tmp/img
 
-	$TUNEFS $tmpdir/mds || error "tunefs failed"
+	setupall
+	pushd /mnt/$FSNAME
+	ls -Rni --time-style=+%s >$tmp/img/list
+	find . ! -name .lustre -type f -exec sha1sum {} \; |
+		sort -k 2 >$tmp/img/sha1sums
+	popd
+	$LCTL get_param -n version | head -n 1 |
+		sed -e 's/^lustre: *//' >$tmp/img/commit
+	stopall
 
-	combined_mgs_mds || stop mgs
+	pushd $tmp/src
+	find -type f -exec sha1sum {} \; | sort -k 2 >$tmp/sha1sums.src
+	popd
 
-	# nids are wrong, so client wont work, but server should start
-	start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
-		trap cleanup_32 EXIT INT || return 3
+	if ! diff -u $tmp/sha1sums.src $tmp/img/sha1sums; then
+		echo "Data verification failed"
+	fi
 
-	local UUID=$($LCTL get_param -n mdt.lustre-MDT0000.uuid)
-	echo MDS uuid $UUID
-	[ "$UUID" == "lustre-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
+	uname -r >$tmp/img/kernel
+	uname -m >$tmp/img/arch
 
-	$TUNEFS --mgsnode=$HOSTNAME $tmpdir/ost1 || error "tunefs failed"
-	start32 ost1 $tmpdir/ost1 "-o loop" || return 5
-	UUID=$($LCTL get_param -n obdfilter.lustre-OST0000.uuid)
-	echo OST uuid $UUID
-	[ "$UUID" == "lustre-OST0000_UUID" ] || error "UUID is wrong: $UUID"
+	mv ${MDSDEV1:-$MDSDEV} $tmp/img
+	mv $OSTDEV1 $tmp/img
 
-	local NID=$($LCTL list_nids | head -1)
+	version=$(sed -e 's/\(^[0-9]\+\.[0-9]\+\)\(.*$\)/\1/' $tmp/img/commit |
+			  sed -e 's/\./_/g')	# E.g., "1.8.7" -> "1_8"
+	dst=$(cd $dst; pwd)
+	pushd $tmp/img
+	tar cjvf $dst/disk$version-$(facet_fstype $SINGLEMDS).tar.bz2 -S *
+	popd
 
-	echo "OSC changes should succeed:"
-	$LCTL conf_param lustre-OST0000.osc.max_dirty_mb=15 || return 7
-	$LCTL conf_param lustre-OST0000.failover.node=$NID || return 8
-	echo "ok."
+	rm -r $tmp
+}
+#run_test 32newtarball "Create a new test_32 disk image tarball for this version"
 
-	echo "MDC changes should succeed:"
-	$LCTL conf_param lustre-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
-	$LCTL conf_param lustre-MDT0000.failover.node=$NID || return 10
-	echo "ok."
+#
+# The list of applicable tarballs is returned via the caller's
+# variable "tarballs".
+#
+t32_check() {
+	local node=$(facet_active_host $SINGLEMDS)
+	local r="do_node $node"
 
-	echo "LOV changes should succeed:"
-	$LCTL pool_new lustre.interop || return 11
-	$LCTL conf_param lustre-MDT0000.lov.stripesize=4M || return 12
-	echo "ok."
+	if [ "$CLIENTONLY" ]; then
+		skip "Client-only testing"
+		exit 0
+	fi
 
-	cleanup_32
+	if ! $r which $TUNEFS; then
+		skip_env "tunefs.lustre required on $node"
+		exit 0
+	fi
 
-	# mount a second time to make sure we didnt leave upgrade flag on
-	load_modules
-	$TUNEFS --dryrun $tmpdir/mds || error "tunefs failed"
+	if [ -n "$($LCTL list_nids | grep -v '\(tcp\|lo\)[[:digit:]]*$')" ]; then
+		skip "LU-2200: Test cannot run over Infiniband"
+		exit 0
+	fi
 
-	combined_mgs_mds || stop mgs
+	local IMGTYPE=$(facet_fstype $SINGLEMDS)
 
-	start32 mds1 $tmpdir/mds "-o loop,exclude=lustre-OST0000" && \
-		trap cleanup_32 EXIT INT || return 12
+	tarballs=$($r find $RLUSTRE/tests -maxdepth 1 -name \'disk*-$IMGTYPE.tar.bz2\')
 
-	cleanup_32
+	if [ -z "$tarballs" ]; then
+		skip "No applicable tarballs found"
+		exit 0
+	fi
+}
 
-	rm -rf $tmpdir || true	# true is only for TMP on NFS
+t32_test_cleanup() {
+	local node=$(facet_active_host $SINGLEMDS)
+	local r="do_node $node"
+	local tmp=$TMP/t32
+	local rc=$?
+
+	if $shall_cleanup_lustre; then
+		umount $tmp/mnt/lustre || rc=$?
+	fi
+	if $shall_cleanup_mdt; then
+		$r umount -d $tmp/mnt/mdt || rc=$?
+	fi
+	if $shall_cleanup_mdt1; then
+		$r umount -d $tmp/mnt/mdt1 || rc=$?
+	fi
+	if $shall_cleanup_ost; then
+		$r umount -d $tmp/mnt/ost || rc=$?
+	fi
+	$r rm -rf $tmp || rc=$?
+	rm -rf $tmp || rc=$?
+	return $rc
 }
-run_test 32a "Upgrade from 1.8 (not live)"
 
-test_32b() {
-	client_only && skip "client only testing" && return 0
-	[ "$NETTYPE" = "tcp" ] || { skip "NETTYPE != tcp" && return 0; }
-	[ -z "$TUNEFS" ] && skip_env "No tunefs" && return
+t32_bits_per_long() {
+	#
+	# Yes, this is not meant to be perfect.
+	#
+	case $1 in
+		ppc64|x86_64)
+			echo -n 64;;
+		i*86)
+			echo -n 32;;
+	esac
+}
+
+t32_reload_modules() {
+	local node=$1
+	local all_removed=false
+	local i=0
+
+	while ((i < 20)); do
+		echo "Unloading modules on $node: Attempt $i"
+		do_rpc_nodes $node $LUSTRE_RMMOD $(facet_fstype $SINGLEMDS) &&
+			all_removed=true
+		do_rpc_nodes $node check_mem_leak || return 1
+		if $all_removed; then
+			load_modules
+			return 0
+		fi
+		sleep 5
+		i=$((i + 1))
+	done
+	echo "Unloading modules on $node: Given up"
+	return 1
+}
+
+t32_wait_til_devices_gone() {
+	local node=$1
+	local devices
+	local i=0
+
+	echo wait for devices to go
+	while ((i < 20)); do
+		devices=$(do_rpc_nodes $node $LCTL device_list | wc -l)
+		echo $device
+		((devices == 0)) && return 1
+		sleep 5
+		i=$((i + 1))
+	done
+	echo "waiting for devices on $node: Given up"
+	return 1
+}
+
+t32_test() {
+	local tarball=$1
+	local writeconf=$2
+	local dne_upgrade=${dne_upgrade:-"no"}
+	local shall_cleanup_mdt=false
+	local shall_cleanup_mdt1=false
+	local shall_cleanup_ost=false
+	local shall_cleanup_lustre=false
+	local node=$(facet_active_host $SINGLEMDS)
+	local r="do_node $node"
+	local node2=$(facet_active_host mds2)
+	local r2="do_node $node2"
+	local tmp=$TMP/t32
+	local img_commit
+	local img_kernel
+	local img_arch
+	local fsname=t32fs
+	local nid=$($r $LCTL list_nids | head -1)
+	local mopts
+	local uuid
+	local nrpcs_orig
+	local nrpcs
+	local list
+
+	trap 'trap - RETURN; t32_test_cleanup' RETURN
+
+	mkdir -p $tmp/mnt/lustre
+	$r mkdir -p $tmp/mnt/{mdt,ost}
+	$r tar xjvf $tarball -S -C $tmp || {
+		error_noexit "Unpacking the disk image tarball"
+		return 1
+	}
+	img_commit=$($r cat $tmp/commit)
+	img_kernel=$($r cat $tmp/kernel)
+	img_arch=$($r cat $tmp/arch)
+	echo "Upgrading from $(basename $tarball), created with:"
+	echo "  Commit: $img_commit"
+	echo "  Kernel: $img_kernel"
+	echo "    Arch: $img_arch"
+
+	$r $LCTL set_param debug="$PTLDEBUG"
+
+	$r $TUNEFS --dryrun $tmp/mdt || {
+		error_noexit "tunefs.lustre before mounting the MDT"
+		return 1
+	}
+	if [ "$writeconf" ]; then
+		mopts=loop,writeconf
+	else
+		mopts=loop,exclude=$fsname-OST0000
+	fi
 
-	local DISK1_8=$LUSTRE/tests/disk1_8.tar.bz2
-	[ ! -r $DISK1_8 ] && skip_env "Cannot find $DISK1_8" && return 0
-	local tmpdir=$TMP/conf32b
-	mkdir -p $tmpdir
-	tar xjvf $DISK1_8 -C $tmpdir || \
-		{ skip_env "Cannot untar $DISK1_8" && return ; }
+	t32_wait_til_devices_gone $node
 
-	load_modules
-	$LCTL set_param debug="config"
-	local NEWNAME=lustre
+	$r mount -t lustre -o $mopts $tmp/mdt $tmp/mnt/mdt || {
+		error_noexit "Mounting the MDT"
+		return 1
+	}
+	shall_cleanup_mdt=true
+
+	if [ "$dne_upgrade" != "no" ]; then
+		echo "mkfs new MDT...."
+		add mds2 $(mkfs_opts mds2 $(mdsdevname 2) $fsname) --reformat \
+			$(mdsdevname 2) $(mdsvdevname 2) > /dev/null || {
+			error_noexit "Mkfs new MDT failed"
+			return 1
+		}
+
+		$r2 $TUNEFS --dryrun $(mdsdevname 2) || {
+			error_noexit "tunefs.lustre before mounting the MDT"
+			return 1
+		}
+
+		echo "mount new MDT...."
+		$r2 mkdir -p $tmp/mnt/mdt1
+		$r2 mount -t lustre -o $mopts $(mdsdevname 2) $tmp/mnt/mdt1 || {
+			error_noexit "mount mdt1 failed"
+			return 1
+		}
+		shall_cleanup_mdt1=true
+	fi
 
-	# writeconf will cause servers to register with their current nids
-	$TUNEFS --writeconf --fsname=$NEWNAME $tmpdir/mds || error "tunefs failed"
-	combined_mgs_mds || stop mgs
+	uuid=$($r $LCTL get_param -n mdt.$fsname-MDT0000.uuid) || {
+		error_noexit "Getting MDT UUID"
+		return 1
+	}
+	if [ "$uuid" != $fsname-MDT0000_UUID ]; then
+		error_noexit "Unexpected MDT UUID: \"$uuid\""
+		return 1
+	fi
 
-	start32 mds1 $tmpdir/mds "-o loop" && \
-		trap cleanup_32 EXIT INT || return 3
+	$r $TUNEFS --dryrun $tmp/ost || {
+		error_noexit "tunefs.lustre before mounting the OST"
+		return 1
+	}
+	if [ "$writeconf" ]; then
+		mopts=loop,mgsnode=$nid,$writeconf
+	else
+		mopts=loop,mgsnode=$nid
+	fi
+	$r mount -t lustre -o $mopts $tmp/ost $tmp/mnt/ost || {
+		error_noexit "Mounting the OST"
+		return 1
+	}
+	shall_cleanup_ost=true
 
-	local UUID=$($LCTL get_param -n mdt.${NEWNAME}-MDT0000.uuid)
-	echo MDS uuid $UUID
-	[ "$UUID" == "${NEWNAME}-MDT0000_UUID" ] || error "UUID is wrong: $UUID"
+	uuid=$($r $LCTL get_param -n obdfilter.$fsname-OST0000.uuid) || {
+		error_noexit "Getting OST UUID"
+		return 1
+	}
+	if [ "$uuid" != $fsname-OST0000_UUID ]; then
+		error_noexit "Unexpected OST UUID: \"$uuid\""
+		return 1
+	fi
 
-	$TUNEFS --mgsnode=$HOSTNAME --writeconf --fsname=$NEWNAME $tmpdir/ost1 ||\
-	    error "tunefs failed"
-	start32 ost1 $tmpdir/ost1 "-o loop" || return 5
-	UUID=$($LCTL get_param -n obdfilter.${NEWNAME}-OST0000.uuid)
-	echo OST uuid $UUID
-	[ "$UUID" == "${NEWNAME}-OST0000_UUID" ] || error "UUID is wrong: $UUID"
+	$r $LCTL conf_param $fsname-OST0000.osc.max_dirty_mb=15 || {
+		error_noexit "Setting \"max_dirty_mb\""
+		return 1
+	}
+	$r $LCTL conf_param $fsname-OST0000.failover.node=$nid || {
+		error_noexit "Setting OST \"failover.node\""
+		return 1
+	}
+	$r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=9 || {
+		error_noexit "Setting \"max_rpcs_in_flight\""
+		return 1
+	}
+	$r $LCTL conf_param $fsname-MDT0000.failover.node=$nid || {
+		error_noexit "Setting MDT \"failover.node\""
+		return 1
+	}
+	$r $LCTL pool_new $fsname.interop || {
+		error_noexit "Setting \"interop\""
+		return 1
+	}
+	$r $LCTL conf_param $fsname-MDT0000.lov.stripesize=4M || {
+		error_noexit "Setting \"lov.stripesize\""
+		return 1
+	}
+
+	if [ "$dne_upgrade" != "no" ]; then
+		$r2 $LCTL conf_param \
+				$fsname-MDT0001.mdc.max_rpcs_in_flight=9 || {
+			error_noexit "Setting MDT1 \"max_rpcs_in_flight\""
+			return 1
+		}
+		$r2 $LCTL conf_param $fsname-MDT0001.failover.node=$nid || {
+			error_noexit "Setting MDT1 \"failover.node\""
+			return 1
+		}
+		$r2 $LCTL conf_param $fsname-MDT0001.lov.stripesize=4M || {
+			error_noexit "Setting MDT1 \"lov.stripesize\""
+			return 1
+		}
 
-	local NID=$($LCTL list_nids | head -1)
+	fi
 
-	echo "OSC changes should succeed:"
-	$LCTL conf_param ${NEWNAME}-OST0000.osc.max_dirty_mb=15 || return 7
-	$LCTL conf_param ${NEWNAME}-OST0000.failover.node=$NID || return 8
-	echo "ok."
+	if [ "$writeconf" ]; then
+		mount -t lustre $nid:/$fsname $tmp/mnt/lustre || {
+			error_noexit "Mounting the client"
+			return 1
+		}
+		shall_cleanup_lustre=true
+		$LCTL set_param debug="$PTLDEBUG"
+		if [ "$dne_upgrade" != "no" ]; then
+			$LFS mkdir -i 1 $tmp/mnt/lustre/remote_dir || {
+				error_noexit "set remote dir failed"
+				return 1
+			}
+
+			pushd $tmp/mnt/lustre
+			tar -cf - . --exclude=./remote_dir |
+				tar -xvf - -C remote_dir 1>/dev/null || {
+				error_noexit "cp to remote dir failed"
+				return 1
+			}
+			popd
+		fi
 
-	echo "MDC changes should succeed:"
-	$LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=9 || return 9
-	$LCTL conf_param ${NEWNAME}-MDT0000.failover.node=$NID || return 10
-	echo "ok."
+		if $r test -f $tmp/sha1sums; then
+			# LU-2393 - do both sorts on same node to ensure locale
+			# is identical
+			$r cat $tmp/sha1sums | sort -k 2 >$tmp/sha1sums.orig
+			if [ "$dne_upgrade" != "no" ]; then
+				pushd $tmp/mnt/lustre/remote_dir
+			else
+				pushd $tmp/mnt/lustre
+			fi
+
+			find ! -name .lustre -type f -exec sha1sum {} \; |
+				sort -k 2 >$tmp/sha1sums || {
+				error_noexit "sha1sum"
+				return 1
+			}
+			popd
+			if ! diff -ub $tmp/sha1sums.orig $tmp/sha1sums; then
+				error_noexit "sha1sum verification failed"
+				return 1
+			fi
+		else
+			echo "sha1sum verification skipped"
+		fi
 
-	echo "LOV changes should succeed:"
-	$LCTL pool_new ${NEWNAME}.interop || return 11
-	$LCTL conf_param ${NEWNAME}-MDT0000.lov.stripesize=4M || return 12
-	echo "ok."
+		if [ "$dne_upgrade" != "no" ]; then
+			rm -rf $tmp/mnt/lustre/remote_dir || {
+				error_noexit "remove remote dir failed"
+				return 1
+			}
+		fi
 
-	# MDT and OST should have registered with new nids, so we should have
-	# a fully-functioning client
-	echo "Check client and old fs contents"
+		if $r test -f $tmp/list; then
+			#
+			# There is not a Test Framework API to copy files to or
+			# from a remote node.
+			#
+			# LU-2393 - do both sorts on same node to ensure locale
+			# is identical
+			$r cat $tmp/list | sort -k 6 >$tmp/list.orig
+			pushd $tmp/mnt/lustre
+			ls -Rni --time-style=+%s | sort -k 6 >$tmp/list || {
+				error_noexit "ls"
+				return 1
+			}
+			popd
+			#
+			# 32-bit and 64-bit clients use different algorithms to
+			# convert FIDs into inode numbers.  Hence, remove the inode
+			# numbers from the lists, if the original list was created
+			# on an architecture with different number of bits per
+			# "long".
+			#
+			if [ $(t32_bits_per_long $(uname -m)) !=						\
+				 $(t32_bits_per_long $img_arch) ]; then
+				echo "Different number of bits per \"long\" from the disk image"
+				for list in list.orig list; do
+					sed -i -e 's/^[0-9]\+[ \t]\+//' $tmp/$list
+				done
+			fi
+			if ! diff -ub $tmp/list.orig $tmp/list; then
+				error_noexit "list verification failed"
+				return 1
+			fi
+		else
+			echo "list verification skipped"
+		fi
 
-	local device=`h2$NETTYPE $HOSTNAME`:/$NEWNAME
-	echo "Starting local client: $HOSTNAME: $device $MOUNT"
-	mount -t lustre $device $MOUNT || return 1
+		#
+		# When adding new data verification tests, please check for
+		# the presence of the required reference files first, like
+		# the "sha1sums" and "list" tests above, to avoid the need to
+		# regenerate every image for each test addition.
+		#
+
+		nrpcs_orig=$($LCTL get_param \
+				-n mdc.*MDT0000*.max_rpcs_in_flight) || {
+			error_noexit "Getting \"max_rpcs_in_flight\""
+			return 1
+		}
+		nrpcs=$((nrpcs_orig + 5))
+		$r $LCTL conf_param $fsname-MDT0000.mdc.max_rpcs_in_flight=$nrpcs || {
+			error_noexit "Changing \"max_rpcs_in_flight\""
+			return 1
+		}
+		wait_update $HOSTNAME "$LCTL get_param \
+			-n mdc.*MDT0000*.max_rpcs_in_flight" $nrpcs || {
+			error_noexit "Verifying \"max_rpcs_in_flight\""
+			return 1
+		}
+
+		umount $tmp/mnt/lustre || {
+			error_noexit "Unmounting the client"
+			return 1
+		}
+		shall_cleanup_lustre=false
+	else
+		$r umount -d $tmp/mnt/mdt || {
+			error_noexit "Unmounting the MDT"
+			return 1
+		}
+		shall_cleanup_mdt=false
+		$r umount -d $tmp/mnt/ost || {
+			error_noexit "Unmounting the OST"
+			return 1
+		}
+		shall_cleanup_ost=false
+
+		t32_reload_modules $node || {
+			error_noexit "Reloading modules"
+			return 1
+		}
+
+		# mount a second time to make sure we didnt leave upgrade flag on
+		$r $TUNEFS --dryrun $tmp/mdt || {
+			error_noexit "tunefs.lustre before remounting the MDT"
+			return 1
+		}
+		$r mount -t lustre -o loop,exclude=$fsname-OST0000 $tmp/mdt			\
+				 $tmp/mnt/mdt || {
+			error_noexit "Remounting the MDT"
+			return 1
+		}
+		shall_cleanup_mdt=true
+	fi
+}
 
-	local old=$($LCTL get_param -n mdc.*.max_rpcs_in_flight)
-	local new=$((old + 5))
-	$LCTL conf_param ${NEWNAME}-MDT0000.mdc.max_rpcs_in_flight=$new
-	wait_update $HOSTNAME "$LCTL get_param -n mdc.*.max_rpcs_in_flight" $new || return 11
+test_32a() {
+	local tarballs
+	local tarball
+	local rc=0
 
-	[ "$(cksum $MOUNT/passwd | cut -d' ' -f 1,2)" == "94306271 1478" ] || return 12
-	echo "ok."
+	t32_check
+	for tarball in $tarballs; do
+		t32_test $tarball || rc=$?
+	done
+	return $rc
+}
+run_test 32a "Upgrade (not live)"
 
-	cleanup_32
+test_32b() {
+	local tarballs
+	local tarball
+	local rc=0
 
-	rm -rf $tmpdir || true  # true is only for TMP on NFS
+	t32_check
+	for tarball in $tarballs; do
+		t32_test $tarball writeconf || rc=$?
+	done
+	return $rc
 }
-run_test 32b "Upgrade from 1.8 with writeconf"
+run_test 32b "Upgrade with writeconf"
+
+test_32c() {
+	local tarballs
+	local tarball
+	local rc=0
+
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	t32_check
+	for tarball in $tarballs; do
+		dne_upgrade=yes t32_test $tarball writeconf || rc=$?
+	done
+	return $rc
+}
+run_test 32c "dne upgrade test"
 
 test_33a() { # bug 12333, was test_33
         local rc=0
         local FSNAME2=test-123
         local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
+	local mkfsoptions
 
         [ -n "$ost1_HOST" ] && fs2ost_HOST=$ost1_HOST
 
@@ -1329,12 +1746,20 @@ test_33a() { # bug 12333, was test_33
                 skip_env "mixed loopback and real device not working" && return
         fi
 
-        combined_mgs_mds || mkfs_opts="$mkfs_opts --nomgs"
+	local fs2mdsdev=$(mdsdevname 1_2)
+	local fs2ostdev=$(ostdevname 1_2)
+	local fs2mdsvdev=$(mdsvdevname 1_2)
+	local fs2ostvdev=$(ostvdevname 1_2)
 
-        local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
-        local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
-        add fs2mds $MDS_MKFS_OPTS --mkfsoptions='\"-J size=8\"' --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
-        add fs2ost $OST_MKFS_OPTS --fsname=${FSNAME2} --index=8191 --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
+	if [ $(facet_fstype mds1) == ldiskfs ]; then
+		mkfsoptions="--mkfsoptions=\\\"-J size=8\\\"" # See bug 17931.
+	fi
+
+	add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
+		--reformat $mkfsoptions $fs2mdsdev $fs2mdsvdev || exit 10
+	add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
+		--fsname=${FSNAME2} --index=8191 --reformat $fs2ostdev \
+		$fs2ostvdev || exit 10
 
         start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS && trap cleanup_24a EXIT INT
         start fs2ost $fs2ostdev $OST_MOUNT_OPTS
@@ -1349,7 +1774,6 @@ test_33a() { # bug 12333, was test_33
         umount -d $MOUNT2
         stop fs2ost -f
         stop fs2mds -f
-        rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev
         cleanup_nocli || rc=6
         return $rc
 }
@@ -1360,7 +1784,7 @@ test_33b() {	# was test_34
 
         do_facet client dd if=/dev/zero of=$MOUNT/24 bs=1024k count=1
         # Drop lock cancelation reply during umount
-	#define OBD_FAIL_LDLM_CANCEL             0x304
+	#define OBD_FAIL_LDLM_CANCEL_NET			0x304
         do_facet client lctl set_param fail_loc=0x80000304
         #lctl set_param debug=-1
         umount_client $MOUNT
@@ -1388,7 +1812,7 @@ test_34b() {
 	touch $DIR/$tfile || return 1
 	stop_mds --force || return 2
 
- 	manual_umount_client --force
+	manual_umount_client --force
 	rc=$?
 	if [ $rc -ne 0 ]; then
 		error "mtab after failed umount - rc $rc"
@@ -1404,7 +1828,7 @@ test_34c() {
 	touch $DIR/$tfile || return 1
 	stop_ost --force || return 2
 
- 	manual_umount_client --force
+	manual_umount_client --force
 	rc=$?
 	if [ $rc -ne 0 ]; then
 		error "mtab after failed umount - rc $rc"
@@ -1424,7 +1848,8 @@ test_35a() { # bug 12459
 	log "Set up a fake failnode for the MDS"
 	FAKENID="127.0.0.2"
 	local device=$(do_facet $SINGLEMDS "lctl get_param -n devices" | awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
-	do_facet $SINGLEMDS $LCTL conf_param ${device}.failover.node=$FAKENID || return 4
+	do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
+		"$(h2$NETTYPE $FAKENID)" || return 4
 
 	log "Wait for RECONNECT_INTERVAL seconds (10s)"
 	sleep 10
@@ -1432,13 +1857,13 @@ test_35a() { # bug 12459
 	MSG="conf-sanity.sh test_35a `date +%F%kh%Mm%Ss`"
 	$LCTL clear
 	log "$MSG"
-	log "Stopping the MDT:"
-	stop_mds || return 5
+	log "Stopping the MDT: $device"
+	stop_mdt 1 || return 5
 
 	df $MOUNT > /dev/null 2>&1 &
 	DFPID=$!
-	log "Restarting the MDT:"
-	start_mds || return 6
+	log "Restarting the MDT: $device"
+	start_mdt 1 || return 6
 	log "Wait for df ($DFPID) ... "
 	wait $DFPID
 	log "done"
@@ -1460,7 +1885,7 @@ test_35a() { # bug 12459
 	[ "$NEXTCONN" != "0" ] && log "The client didn't try to reconnect to the last active server (tried ${NEXTCONN} instead)" && return 7
 	cleanup
 	# remove nid settings
-	writeconf
+	writeconf_or_reformat
 }
 run_test 35a "Reconnect to the last active server first"
 
@@ -1478,29 +1903,31 @@ test_35b() { # bug 18674
 	FAKENID="127.0.0.2"
 	local device=$(do_facet $SINGLEMDS "$LCTL get_param -n devices" | \
 			awk '($3 ~ "mdt" && $4 ~ "MDT") { print $4 }' | head -1)
-	do_facet $SINGLEMDS "$LCTL conf_param ${device}.failover.node=$FAKENID" || \
-		return 1
+	do_facet mgs "$LCTL conf_param ${device}.failover.node=" \
+		"$(h2$NETTYPE $FAKENID)" || return 1
 
 	local at_max_saved=0
-	# adaptive timeouts may prevent seeing the issue 
+	# adaptive timeouts may prevent seeing the issue
 	if at_is_enabled; then
 		at_max_saved=$(at_max_get mds)
 		at_max_set 0 mds client
 	fi
 
-	mkdir -p $MOUNT/testdir
-	touch $MOUNT/testdir/test
+	mkdir -p $MOUNT/$tdir
 
 	log "Injecting EBUSY on MDS"
 	# Setting OBD_FAIL_MDS_RESEND=0x136
 	do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000136" || return 2
 
-	log "Stat on a test file"
-	stat $MOUNT/testdir/test
+	$LCTL set_param mdc.${FSNAME}*.stats=clear
+
+	log "Creating a test file and stat it"
+	touch $MOUNT/$tdir/$tfile
+	stat $MOUNT/$tdir/$tfile
 
 	log "Stop injecting EBUSY on MDS"
 	do_facet $SINGLEMDS "$LCTL set_param fail_loc=0" || return 3
-	rm -f $MOUNT/testdir/test
+	rm -f $MOUNT/$tdir/$tfile
 
 	log "done"
 	# restore adaptive timeout
@@ -1508,6 +1935,8 @@ test_35b() { # bug 18674
 
 	$LCTL dk $TMP/lustre-log-$TESTNAME.log
 
+	CONNCNT=`$LCTL get_param mdc.${FSNAME}*.stats | awk '/mds_connect/{print $2}'`
+
 	# retrieve from the log if the client has ever tried to
 	# contact the fake server after the loss of connection
 	FAILCONN=`awk "BEGIN {ret = 0;}
@@ -1527,9 +1956,16 @@ test_35b() { # bug 18674
 		log "ERROR: The client tried to reconnect to the failover server while the primary was busy" && \
 		return 5
 
-        cleanup
+	# LU-290
+	# When OBD_FAIL_MDS_RESEND is hit, we sleep for 2 * obd_timeout
+	# Reconnects are supposed to be rate limited to one every 5s
+	[ $CONNCNT -gt $((2 * $TIMEOUT / 5 + 1)) ] && \
+		log "ERROR: Too many reconnects $CONNCNT" && \
+		return 6
+
+	cleanup
 	# remove nid settings
-	writeconf
+	writeconf_or_reformat
 }
 run_test 35b "Continue reconnection retries, if the active server is busy"
 
@@ -1551,14 +1987,21 @@ test_36() { # 12743
 		skip_env "mixed loopback and real device not working" && return
         fi
 
-        local fs2mdsdev=${fs2mds_DEV:-${MDSDEV}_2}
-        local fs2ostdev=${fs2ost_DEV:-$(ostdevname 1)_2}
-        local fs3ostdev=${fs3ost_DEV:-$(ostdevname 2)_2}
-        add fs2mds $MDS_MKFS_OPTS --fsname=${FSNAME2} --reformat $fs2mdsdev || exit 10
-        # XXX after we support non 4K disk blocksize, change following --mkfsoptions with
-        # other argument
-        add fs2ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs2ostdev || exit 10
-        add fs3ost $OST_MKFS_OPTS --mkfsoptions='-b4096' --fsname=${FSNAME2} --mgsnode=$MGSNID --reformat $fs3ostdev || exit 10
+	local fs2mdsdev=$(mdsdevname 1_2)
+	local fs2ostdev=$(ostdevname 1_2)
+	local fs3ostdev=$(ostdevname 2_2)
+	local fs2mdsvdev=$(mdsvdevname 1_2)
+	local fs2ostvdev=$(ostvdevname 1_2)
+	local fs3ostvdev=$(ostvdevname 2_2)
+
+	add fs2mds $(mkfs_opts mds1 ${fs2mdsdev}) --mgs --fsname=${FSNAME2} \
+		--reformat $fs2mdsdev $fs2mdsvdev || exit 10
+	# XXX after we support non 4K disk blocksize in ldiskfs, specify a
+	#     different one than the default value here.
+	add fs2ost $(mkfs_opts ost1 ${fs2ostdev}) --mgsnode=$MGSNID \
+		--fsname=${FSNAME2} --reformat $fs2ostdev $fs2ostvdev || exit 10
+	add fs3ost $(mkfs_opts ost1 ${fs3ostdev}) --mgsnode=$MGSNID \
+		--fsname=${FSNAME2} --reformat $fs3ostdev $fs3ostvdev || exit 10
 
         start fs2mds $fs2mdsdev $MDS_MOUNT_OPTS
         start fs2ost $fs2ostdev $OST_MOUNT_OPTS
@@ -1601,7 +2044,6 @@ test_36() { # 12743
         stop fs3ost -f || return 200
         stop fs2ost -f || return 201
         stop fs2mds -f || return 202
-        rm -rf $MOUNT2 $fs2mdsdev $fs2ostdev $fs3ostdev
         unload_modules_conf || return 203
         return $rc
 }
@@ -1611,6 +2053,13 @@ test_37() {
 	local mntpt=$(facet_mntpt $SINGLEMDS)
 	local mdsdev=$(mdsdevname ${SINGLEMDS//mds/})
 	local mdsdev_sym="$TMP/sym_mdt.img"
+	local opts=$MDS_MOUNT_OPTS
+	local rc=0
+
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Currently only applicable to ldiskfs-based MDTs"
+		return
+	fi
 
 	echo "MDS :     $mdsdev"
 	echo "SYMLINK : $mdsdev_sym"
@@ -1620,8 +2069,11 @@ test_37() {
 
 	echo "mount symlink device - $mdsdev_sym"
 
-	local rc=0
-	mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $MDS_MOUNT_OPTS  $mdsdev_sym $mntpt 2>&1 )
+	if ! do_facet $SINGLEMDS test -b $mdsdev; then
+		opts=$(csa_add "$opts" -o loop)
+	fi
+	mount_op=$(do_facet $SINGLEMDS mount -v -t lustre $opts \
+		$mdsdev_sym $mntpt 2>&1)
 	rc=${PIPESTATUS[0]}
 
 	echo mount_op=$mount_op
@@ -1639,6 +2091,11 @@ test_37() {
 run_test 37 "verify set tunables works for symlink device"
 
 test_38() { # bug 14222
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
 	setup
 	# like runtests
 	COUNT=10
@@ -1707,14 +2164,18 @@ run_test 39 "leak_finder recognizes both LUSTRE and LNET malloc messages"
 test_40() { # bug 15759
 	start_ost
 	#define OBD_FAIL_TGT_TOOMANY_THREADS     0x706
-	do_facet $SINGLEMDS "sysctl -w lustre.fail_loc=0x80000706"
+	do_facet $SINGLEMDS "$LCTL set_param fail_loc=0x80000706"
 	start_mds
 	cleanup
 }
 run_test 40 "race during service thread startup"
 
 test_41a() { #bug 14134
-        echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+	if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+	   ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
+		skip "Loop devices does not work with nosvc option"
+		return
+	fi
 
         local rc
         local MDSDEV=$(mdsdevname ${SINGLEMDS//mds/})
@@ -1739,7 +2200,13 @@ test_41a() { #bug 14134
 run_test 41a "mount mds with --nosvc and --nomgs"
 
 test_41b() {
-        echo $MDS_MOUNT_OPTS | grep "loop" && skip " loop devices does not work with nosvc option" && return
+	if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+	   ! do_facet $SINGLEMDS test -b $(mdsdevname 1); then
+		skip "Loop devices does not work with nosvc option"
+		return
+	fi
+
+        ! combined_mgs_mds && skip "needs combined mgs device" && return 0
 
         stopall
         reformat
@@ -1761,31 +2228,39 @@ test_41b() {
         stop_mds -f || return 203
 
 }
-
 run_test 41b "mount mds with --nosvc and --nomgs on first mount"
+
 test_42() { #bug 14693
-        setup
-        check_mount || return 2
-        do_facet mgs $LCTL conf_param lustre.llite.some_wrong_param=10
-        umount_client $MOUNT
-        mount_client $MOUNT || return 1
-        cleanup
-        return 0
+	setup
+	check_mount || error "client was not mounted"
+
+	do_facet mgs $LCTL conf_param $FSNAME.llite.some_wrong_param=10
+	umount_client $MOUNT ||
+		error "unmounting client failed with invalid llite param"
+	mount_client $MOUNT ||
+		error "mounting client failed with invalid llite param"
+
+	do_facet mgs $LCTL conf_param $FSNAME.sys.some_wrong_param=20
+	cleanup || error "stopping $FSNAME failed with invalid sys param"
+	setup
+	check_mount || "client was not mounted with invalid sys param"
+	cleanup || error "stopping $FSNAME failed with invalid sys param"
+	return 0
 }
-run_test 42 "invalid config param should not prevent client from mounting"
+run_test 42 "allow client/server mount/unmount with invalid config param"
 
 test_43() {
-    [ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
-    setup
-    chmod ugo+x $DIR || error "chmod 0 failed"
-    set_and_check mds                                        \
-        "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"  \
-        "$FSNAME.mdt.root_squash"                            \
-        "0:0"
-    set_and_check mds                                        \
-       "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
-       "$FSNAME.mdt.nosquash_nids"                           \
-       "NONE"
+	[ $UID -ne 0 -o $RUNAS_ID -eq 0 ] && skip_env "run as root"
+	setup
+	chmod ugo+x $DIR || error "chmod 0 failed"
+	set_conf_param_and_check mds					\
+		"lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"	\
+		"$FSNAME.mdt.root_squash"				\
+		"0:0"
+	set_conf_param_and_check mds					\
+		"lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids"	\
+		"$FSNAME.mdt.nosquash_nids"				\
+		"NONE"
 
     #
     # create set of test files
@@ -1801,15 +2276,15 @@ test_43() {
     chmod go-rwx $DIR/$tdir-rootdir   || error "chmod 3 failed"
     touch $DIR/$tdir-rootdir/tfile-1  || error "touch failed"
 
-    #
-    # check root_squash:
-    #   set root squash UID:GID to RUNAS_ID
-    #   root should be able to access only files owned by RUNAS_ID
-    #
-    set_and_check mds                                        \
-       "lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"   \
-       "$FSNAME.mdt.root_squash"                             \
-       "$RUNAS_ID:$RUNAS_ID"
+	#
+	# check root_squash:
+	#   set root squash UID:GID to RUNAS_ID
+	#   root should be able to access only files owned by RUNAS_ID
+	#
+	set_conf_param_and_check mds					\
+		"lctl get_param -n mdt.$FSNAME-MDT0000.root_squash"	\
+		"$FSNAME.mdt.root_squash"				\
+		"$RUNAS_ID:$RUNAS_ID"
 
     ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-userfile)
     dd if=$DIR/$tfile-userfile 1>/dev/null 2>/dev/null || \
@@ -1840,18 +2315,18 @@ test_43() {
         error "$ST: root create permission is granted"
     echo "$ST: root create permission is denied - ok"
 
-    #
-    # check nosquash_nids:
-    #   put client's NID into nosquash_nids list,
-    #   root should be able to access root file after that
-    #
-    local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
-    NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
-    NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
-    set_and_check mds                                        \
-       "lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids" \
-       "$FSNAME-MDTall.mdt.nosquash_nids"                    \
-       "$NIDLIST"
+	#
+	# check nosquash_nids:
+	#   put client's NID into nosquash_nids list,
+	#   root should be able to access root file after that
+	#
+	local NIDLIST=$(lctl list_nids all | tr '\n' ' ')
+	NIDLIST="2@elan $NIDLIST 192.168.0.[2,10]@tcp"
+	NIDLIST=$(echo $NIDLIST | tr -s ' ' ' ')
+	set_conf_param_and_check mds					\
+		"lctl get_param -n mdt.$FSNAME-MDT0000.nosquash_nids"	\
+		"$FSNAME-MDTall.mdt.nosquash_nids"			\
+		"$NIDLIST"
 
     ST=$(stat -c "%n: owner uid %u (%A)" $DIR/$tfile-rootfile)
     dd if=$DIR/$tfile-rootfile 1>/dev/null 2>/dev/null || \
@@ -1926,10 +2401,10 @@ cleanup_46a() {
 		stop ost${count} -f || rc=$?
 		let count=count-1
 	done	
-	stop_mds || rc=$? 
+	stop_mds || rc=$?
 	cleanup_nocli || rc=$?
 	#writeconf to remove all ost2 traces for subsequent tests
-	writeconf
+	writeconf_or_reformat
 	return $rc
 }
 
@@ -1944,7 +2419,7 @@ test_46a() {
 	mount_client $MOUNT || return 3
 	trap "cleanup_46a $OSTCOUNT" EXIT ERR
 
-	local i 
+	local i
 	for (( i=2; i<=$OSTCOUNT; i++ )); do
 	    start ost$i `ostdevname $i` $OST_MOUNT_OPTS || return $((i+2))
 	done
@@ -1952,13 +2427,13 @@ test_46a() {
 	# wait until osts in sync
 	for (( i=2; i<=$OSTCOUNT; i++ )); do
 	    wait_osc_import_state mds ost$i FULL
+	    wait_osc_import_state client ost$i FULL
 	done
 
-
 	#second client see all ost's
 
 	mount_client $MOUNT2 || return 8
-	$LFS setstripe $MOUNT2 -c -1 || return 9
+	$LFS setstripe -c -1 $MOUNT2 || return 9
 	$LFS getstripe $MOUNT2 || return 10
 
 	echo "ok" > $MOUNT2/widestripe
@@ -2026,9 +2501,9 @@ cleanup_48() {
 test_48() { # bug 17636
 	reformat
 	setup_noconfig
-        check_mount || return 2
+	check_mount || return 2
 
-	$LFS setstripe $MOUNT -c -1 || return 9
+	$LFS setstripe -c -1 $MOUNT || return 9
 	$LFS getstripe $MOUNT || return 10
 
 	echo "ok" > $MOUNT/widestripe
@@ -2050,12 +2525,12 @@ run_test 48 "too many acls on file"
 
 # check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE
 test_49() { # bug 17710
-	local OLD_MDS_MKFS_OPTS=$MDS_MKFS_OPTS
-	local OLD_OST_MKFS_OPTS=$OST_MKFS_OPTS
+	local timeout_orig=$TIMEOUT
+	local ldlm_timeout_orig=$LDLM_TIMEOUT
 	local LOCAL_TIMEOUT=20
 
-
-	OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$LOCAL_TIMEOUT $MKFSOPT $OSTOPT"
+	LDLM_TIMEOUT=$LOCAL_TIMEOUT
+	TIMEOUT=$LOCAL_TIMEOUT
 
 	reformat
 	setup_noconfig
@@ -2078,7 +2553,7 @@ test_49() { # bug 17710
 	stop_ost || return 2
 	stop_mds || return 3
 
-	OST_MKFS_OPTS="--ost --fsname=$FSNAME --device-size=$OSTSIZE --mgsnode=$MGSNID --param sys.timeout=$LOCAL_TIMEOUT --param sys.ldlm_timeout=$((LOCAL_TIMEOUT - 1)) $MKFSOPT $OSTOPT"
+	LDLM_TIMEOUT=$((LOCAL_TIMEOUT - 1))
 
 	reformat
 	setup_noconfig
@@ -2098,8 +2573,8 @@ test_49() { # bug 17710
 
 	cleanup || return $?
 
-	MDS_MKFS_OPTS=$OLD_MDS_MKFS_OPTS
-	OST_MKFS_OPTS=$OLD_OST_MKFS_OPTS
+	LDLM_TIMEOUT=$ldlm_timeout_orig
+	TIMEOUT=$timeout_orig
 }
 run_test 49 "check PARAM_SYS_LDLM_TIMEOUT option of MKFS.LUSTRE"
 
@@ -2167,9 +2642,11 @@ test_50c() {
         wait_osc_import_state mds ost DISCONN
 	lazystatfs $MOUNT || error "lazystatfs failed with one down server"
 
- 	umount_client $MOUNT || error "Unable to unmount client"
+	umount_client $MOUNT || error "Unable to unmount client"
 	stop_ost2 || error "Unable to stop OST2"
 	stop_mds || error "Unable to stop MDS"
+	#writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
 }
 run_test 50c "lazystatfs one server down =========================="
 
@@ -2187,9 +2664,11 @@ test_50d() {
 	stop_ost || error "Unable to stop OST1"
 	lazystatfs $MOUNT || error "lazystatfs failed with one down server"
 
- 	umount_client $MOUNT || error "Unable to unmount client"
+	umount_client $MOUNT || error "Unable to unmount client"
 	stop_ost2 || error "Unable to stop OST2"
 	stop_mds || error "Unable to stop MDS"
+	#writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
 }
 run_test 50d "lazystatfs client/server conn race =========================="
 
@@ -2271,7 +2750,7 @@ test_50f() {
 	stop_ost || error "Unable to stop OST1"
 	stop_mds || error "Unable to stop MDS"
 	#writeconf to remove all ost2 traces for subsequent tests
-	writeconf
+	writeconf_or_reformat
 }
 run_test 50f "normal statfs one server in down =========================="
 
@@ -2299,7 +2778,7 @@ test_50g() {
 	stop_ost || error "Unable to stop OST1"
 	stop_mds || error "Unable to stop MDS"
 	#writeconf to remove all ost2 traces for subsequent tests
-	writeconf
+	writeconf_or_reformat
 }
 run_test 50g "deactivated OST should not cause panic====================="
 
@@ -2321,6 +2800,8 @@ test_51() {
 	wait $pid
 	stop_ost2 || return 3
 	cleanup
+	#writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
 }
 run_test 51 "Verify that mdt_reint handles RMF_MDT_MD correctly when an OST is added"
 
@@ -2373,6 +2854,11 @@ diff_files_xattrs()
 }
 
 test_52() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
 	start_mds
 	[ $? -eq 0 ] || { error "Unable to start MDS"; return 1; }
 	start_ost
@@ -2381,9 +2867,10 @@ test_52() {
 	[ $? -eq 0 ] || { error "Unable to mount client"; return 3; }
 
 	local nrfiles=8
-	local ost1mnt=${MOUNT%/*}/ost1
+	local ost1mnt=$(facet_mntpt ost1)
 	local ost1node=$(facet_active_host ost1)
 	local ost1tmp=$TMP/conf52
+	local loop
 
 	mkdir -p $DIR/$tdir
 	[ $? -eq 0 ] || { error "Unable to create tdir"; return 4; }
@@ -2395,7 +2882,7 @@ test_52() {
 	[ $? -eq 0 ] || { error "Unable to create temporary file"; return 6; }
 	sleep 1
 
-	$LFS setstripe $DIR/$tdir -c -1 -s 1M
+	$LFS setstripe -c -1 -S 1M $DIR/$tdir
 	[ $? -eq 0 ] || { error "lfs setstripe failed"; return 7; }
 
 	for (( i=0; i < nrfiles; i++ )); do
@@ -2417,14 +2904,21 @@ test_52() {
 	[ $? -eq 0 ] || { error "Unable to stop ost1"; return 11; }
 
 	echo mount ost1 as ldiskfs
-	do_node $ost1node mount -t $FSTYPE $ost1_dev $ost1mnt $OST_MOUNT_OPTS
+	do_node $ost1node mkdir -p $ost1mnt
+	[ $? -eq 0 ] || { error "Unable to create $ost1mnt"; return 23; }
+	if ! do_node $ost1node test -b $ost1_dev; then
+		loop="-o loop"
+	fi
+	do_node $ost1node mount -t $(facet_fstype ost1) $loop $ost1_dev \
+		$ost1mnt
 	[ $? -eq 0 ] || { error "Unable to mount ost1 as ldiskfs"; return 12; }
 
 	# backup objects
 	echo backup objects to $ost1tmp/objects
-	local objects=$(do_node $ost1node 'find '$ost1mnt'/O/0 -type f -size +0'\
-			'-newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
-	copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
+	local objects=$(do_node $ost1node 'find '$ost1mnt'/O/[0-9]* -type f'\
+		'-size +0 -newer '$ost1tmp'/modified_first -regex ".*\/[0-9]+"')
+	copy_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs \
+			$objects
 	[ $? -eq 0 ] || { error "Unable to copy objects"; return 13; }
 
 	# move objects to lost+found
@@ -2439,7 +2933,7 @@ test_52() {
 	diff_files_xattrs $ost1node $ost1tmp/objects $ost1tmp/object_xattrs $objects
 	[ $? -eq 0 ] || { error "Unable to diff objects"; return 16; }
 
-	do_node $ost1node "umount $ost1_dev"
+	do_node $ost1node "umount $ost1mnt"
 	[ $? -eq 0 ] || { error "Unable to umount ost1 as ldiskfs"; return 17; }
 
 	start_ost
@@ -2468,6 +2962,7 @@ thread_sanity() {
         local facet=$2
         local parampat=$3
         local opts=$4
+	local basethr=$5
         local tmin
         local tmin2
         local tmax
@@ -2475,9 +2970,10 @@ thread_sanity() {
         local tstarted
         local paramp
         local msg="Insane $modname thread counts"
+	local ncpts=$(check_cpt_number $facet)
+	local nthrs
         shift 4
 
-        setup
         check_mount || return 41
 
         # We need to expand $parampat, but it may match multiple parameters, so
@@ -2496,13 +2992,23 @@ thread_sanity() {
         tstarted=$(do_facet $facet "lctl get_param -n ${paramp}.threads_started" || echo 0)
         lassert 23 "$msg (PDSH problems?)" '(($tstarted && $tmin && $tmax))' || return $?
         lassert 24 "$msg" '(($tstarted >= $tmin && $tstarted <= $tmax ))' || return $?
+	nthrs=$(expr $tmax - $tmin)
+	if [ $nthrs -lt $ncpts ]; then
+		nthrs=0
+	else
+		nthrs=$ncpts
+	fi
+
+	[ $tmin -eq $tmax -a $tmin -eq $tstarted ] &&
+		skip_env "module parameter forced $facet thread count" &&
+		tmin=3 && tmax=$((3 * tmax))
 
         # Check that we can change min/max
-        do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + 1))"
-        do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - 1))"
-        tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
-        tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
-        lassert 25 "$msg" '(($tmin2 == ($tmin + 1) && $tmax2 == ($tmax -1)))' || return $?
+	do_facet $facet "lctl set_param ${paramp}.threads_min=$((tmin + nthrs))"
+	do_facet $facet "lctl set_param ${paramp}.threads_max=$((tmax - nthrs))"
+	tmin2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
+	tmax2=$(do_facet $facet "lctl get_param -n ${paramp}.threads_max" || echo 0)
+	lassert 25 "$msg" '(($tmin2 == ($tmin + $nthrs) && $tmax2 == ($tmax - $nthrs)))' || return $?
 
         # Check that we can set min/max to the same value
         tmin=$(do_facet $facet "lctl get_param -n ${paramp}.threads_min" || echo 0)
@@ -2522,7 +3028,8 @@ thread_sanity() {
         LOAD_MODULES_REMOTE=true
         cleanup
         local oldvalue
-        setmodopts -a $modname "$opts" oldvalue
+	local newvalue="${opts}=$(expr $basethr \* $ncpts)"
+	setmodopts -a $modname "$newvalue" oldvalue
 
         load_modules
         setup
@@ -2538,51 +3045,55 @@ thread_sanity() {
         lassert 28 "$msg" '(($tstarted == $tmin && $tstarted == $tmax ))' || return $?
         cleanup
 
-        # Workaround a YALA bug where YALA expects that modules will remain
-        # loaded on the servers
-        LOAD_MODULES_REMOTE=false
         load_modules
         setup
-        cleanup
 }
 
 test_53a() {
-        thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads=64'
+	setup
+	thread_sanity OST ost1 'ost.*.ost' 'oss_num_threads' '16'
+	cleanup
 }
 run_test 53a "check OSS thread count params"
 
 test_53b() {
-        thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads=64'
-}
-run_test 53b "check MDT thread count params"
-
-run_llverfs()
-{
-        local dir=$1
-        local partial_arg=""
-        local size=$(df -B G $dir | tail -1 | awk '{print $2}' | sed 's/G//') # Gb
-
-        # Run in partial (fast) mode if the size
-        # of a partition > 10 GB
-        [ $size -gt 10 ] && partial_arg="-p"
-
-        llverfs $partial_arg $dir
+	setup
+	local mds=$(do_facet $SINGLEMDS "lctl get_param -N mds.*.*.threads_max \
+		    2>/dev/null")
+	if [ -z "$mds" ]; then
+		#running this on an old MDT
+		thread_sanity MDT $SINGLEMDS 'mdt.*.*.' 'mdt_num_threads' 16
+	else
+		thread_sanity MDT $SINGLEMDS 'mds.*.*.' 'mds_num_threads' 16
+	fi
+	cleanup
 }
+run_test 53b "check MDS thread count params"
 
 test_54a() {
-    do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1)
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
+    do_rpc_nodes $(facet_host ost1) run_llverdev $(ostdevname 1) -p
     [ $? -eq 0 ] || error "llverdev failed!"
     reformat_and_config
 }
-run_test 54a "llverdev"
+run_test 54a "test llverdev and partial verify of device"
 
 test_54b() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
     setup
-    run_llverfs $MOUNT
+    run_llverfs $MOUNT -p
     [ $? -eq 0 ] || error "llverfs failed!"
     cleanup
 }
-run_test 54b "llverfs"
+run_test 54b "test llverfs and partial verify of filesystem"
 
 lov_objid_size()
 {
@@ -2591,20 +3102,25 @@ lov_objid_size()
 }
 
 test_55() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
 	local mdsdev=$(mdsdevname 1)
-	local ostdev=$(ostdevname 1)
-	local saved_opts=$OST_MKFS_OPTS
+	local mdsvdev=$(mdsvdevname 1)
 
-	for i in 0 1023 2048
+	for i in 1023 2048
 	do
-		OST_MKFS_OPTS="$saved_opts --index $i"
-		reformat
-
+		add mds1 $(mkfs_opts mds1 ${mdsdev}) --reformat $mdsdev \
+			$mdsvdev || exit 10
+		add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=$i \
+			--reformat $(ostdevname 1) $(ostvdevname 1)
 		setup_noconfig
 		stopall
-
-		setup
+		setup_noconfig
 		sync
+
 		echo checking size of lov_objid for ost index $i
 		LOV_OBJID_SIZE=$(do_facet mds1 "$DEBUGFS -R 'stat lov_objid' $mdsdev 2>/dev/null" | grep ^User | awk '{print $6}')
 		if [ "$LOV_OBJID_SIZE" != $(lov_objid_size $i) ]; then
@@ -2615,43 +3131,85 @@ test_55() {
 		stopall
 	done
 
-	OST_MKFS_OPTS=$saved_opts
 	reformat
 }
 run_test 55 "check lov_objid size"
 
 test_56() {
-	add mds1 $MDS_MKFS_OPTS --mkfsoptions='\"-J size=16\"' --reformat $(mdsdevname 1)
-	add ost1 $OST_MKFS_OPTS --index=1000 --reformat $(ostdevname 1)
-	add ost2 $OST_MKFS_OPTS --index=10000 --reformat $(ostdevname 2)
+	local mds_journal_size_orig=$MDSJOURNALSIZE
 
-	start_mds
+	MDSJOURNALSIZE=16
+
+	for num in $(seq 1 $MDSCOUNT); do
+		add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
+			--reformat $(mdsdevname $num) $(mdsvdevname $num)
+	done
+	add ost1 $(mkfs_opts ost1 $(ostdevname 1)) --index=1000 --reformat \
+		$(ostdevname 1) $(ostvdevname 1)
+	add ost2 $(mkfs_opts ost2 $(ostdevname 2)) --index=10000 --reformat \
+		$(ostdevname 2) $(ostvdevname 2)
+
+	start_mgsmds
 	start_ost
 	start_ost2 || error "Unable to start second ost"
 	mount_client $MOUNT || error "Unable to mount client"
 	echo ok
 	$LFS osts
-	[ -n "$ENABLE_QUOTA" ] && { $LFS quotacheck -ug $MOUNT || error "quotacheck has failed" ; }
 	stopall
+	MDSJOURNALSIZE=$mds_journal_size_orig
 	reformat
 }
 run_test 56 "check big indexes"
 
-test_57() { # bug 22656
+test_57a() { # bug 22656
 	local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
-	writeconf
+	writeconf_or_reformat
 	do_facet ost1 "$TUNEFS --failnode=$NID `ostdevname 1`" || error "tunefs failed"
 	start_mgsmds
 	start_ost && error "OST registration from failnode should fail"
-	stop_mds
 	reformat
 }
-run_test 57 "initial registration from failnode should fail (should return errs)"
+run_test 57a "initial registration from failnode should fail (should return errs)"
+
+test_57b() {
+	local NID=$(do_facet ost1 "$LCTL get_param nis" | tail -1 | awk '{print $1}')
+	writeconf_or_reformat
+	do_facet ost1 "$TUNEFS --servicenode=$NID `ostdevname 1`" || error "tunefs failed"
+	start_mgsmds
+	start_ost || error "OST registration from servicenode should not fail"
+	reformat
+}
+run_test 57b "initial registration from servicenode should not fail"
 
 count_osts() {
         do_facet mgs $LCTL get_param mgs.MGS.live.$FSNAME | grep OST | wc -l
 }
 
+test_58() { # bug 22658
+	if [ $(facet_fstype mds) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+	setup_noconfig
+	mkdir -p $DIR/$tdir
+	createmany -o $DIR/$tdir/$tfile-%d 100
+	# make sure that OSTs do not cancel llog cookies before we unmount the MDS
+#define OBD_FAIL_OBD_LOG_CANCEL_NET      0x601
+	do_facet mds "lctl set_param fail_loc=0x601"
+	unlinkmany $DIR/$tdir/$tfile-%d 100
+	stop mds
+	local MNTDIR=$(facet_mntpt mds)
+	# remove all files from the OBJECTS dir
+	do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
+	do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
+	do_facet mds "umount $MNTDIR"
+	# restart MDS with missing llog files
+	start_mds
+	do_facet mds "lctl set_param fail_loc=0"
+	reformat
+}
+run_test 58 "missing llog files must not prevent MDT from mounting"
+
 test_59() {
 	start_mgsmds >> /dev/null
 	local C1=$(count_osts)
@@ -2679,31 +3237,518 @@ test_59() {
 	[ $C4 -eq 2 ] || error "OST2 writeconf should add log"
 	stop_ost2 >> /dev/null
 	cleanup_nocli >> /dev/null
+	#writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
 }
 run_test 59 "writeconf mount option"
 
+test_60() { # LU-471
+	local num
 
-test_58() { # bug 22658
-        [ "$FSTYPE" != "ldiskfs" ] && skip "not supported for $FSTYPE" && return
-	setup
-	mkdir -p $DIR/$tdir
-	createmany -o $DIR/$tdir/$tfile-%d 100
-	# make sure that OSTs do not cancel llog cookies before we unmount the MDS
-#define OBD_FAIL_OBD_LOG_CANCEL_NET      0x601
-	do_facet mds "lctl set_param fail_loc=0x601"
-	unlinkmany $DIR/$tdir/$tfile-%d 100
-	stop mds
-	local MNTDIR=$(facet_mntpt mds)
-	# remove all files from the OBJECTS dir
-	do_facet mds "mount -t ldiskfs $MDSDEV $MNTDIR"
-	do_facet mds "find $MNTDIR/OBJECTS -type f -delete"
-	do_facet mds "umount $MNTDIR"
-	# restart MDS with missing llog files
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
+	for num in $(seq $MDSCOUNT); do
+		add mds${num} $(mkfs_opts mds${num} $(mdsdevname $num)) \
+			--mkfsoptions='\" -E stride=64 -O ^uninit_bg\"' \
+			--reformat $(mdsdevname $num) $(mdsvdevname $num) ||
+			exit 10
+	done
+
+	dump=$(do_facet $SINGLEMDS dumpe2fs $(mdsdevname 1))
+	rc=${PIPESTATUS[0]}
+	[ $rc -eq 0 ] || error "dumpe2fs $(mdsdevname 1) failed"
+
+	# MDT default has dirdata feature
+	echo $dump | grep dirdata > /dev/null || error "dirdata is not set"
+	# we disable uninit_bg feature
+	echo $dump | grep uninit_bg > /dev/null && error "uninit_bg is set"
+	# we set stride extended options
+	echo $dump | grep stride > /dev/null || error "stride is not set"
+	reformat
+}
+run_test 60 "check mkfs.lustre --mkfsoptions -E -O options setting"
+
+test_61() { # LU-80
+	local reformat=false
+
+	[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.1.53) ] ||
+		{ skip "Need MDS version at least 2.1.53"; return 0; }
+
+	if [ $(facet_fstype $SINGLEMDS) == ldiskfs ] &&
+	   ! large_xattr_enabled; then
+		reformat=true
+		LDISKFS_MKFS_OPTS+=" -O large_xattr"
+
+		for num in $(seq $MDSCOUNT); do
+			add mds${num} $(mkfs_opts mds$num $(mdsdevname $num)) \
+			--reformat $(mdsdevname $num) $(mdsvdevname $num) ||
+			error "add mds $num failed"
+		done
+	fi
+
+    setup_noconfig || error "setting up the filesystem failed"
+    client_up || error "starting client failed"
+
+    local file=$DIR/$tfile
+    touch $file
+
+    local large_value="$(generate_string $(max_xattr_size))"
+    local small_value="bar"
+
+    local name="trusted.big"
+    log "save large xattr $name on $file"
+    setfattr -n $name -v $large_value $file ||
+        error "saving $name on $file failed"
+
+    local new_value=$(get_xattr_value $name $file)
+    [[ "$new_value" != "$large_value" ]] &&
+        error "$name different after saving"
+
+    log "shrink value of $name on $file"
+    setfattr -n $name -v $small_value $file ||
+        error "shrinking value of $name on $file failed"
+
+    new_value=$(get_xattr_value $name $file)
+    [[ "$new_value" != "$small_value" ]] &&
+        error "$name different after shrinking"
+
+    log "grow value of $name on $file"
+    setfattr -n $name -v $large_value $file ||
+        error "growing value of $name on $file failed"
+
+    new_value=$(get_xattr_value $name $file)
+    [[ "$new_value" != "$large_value" ]] &&
+        error "$name different after growing"
+
+    log "check value of $name on $file after remounting MDS"
+    fail $SINGLEMDS
+    new_value=$(get_xattr_value $name $file)
+    [[ "$new_value" != "$large_value" ]] &&
+        error "$name different after remounting MDS"
+
+    log "remove large xattr $name from $file"
+    setfattr -x $name $file || error "removing $name from $file failed"
+
+    rm -f $file
+    stopall
+	if $reformat; then
+		LDISKFS_MKFS_OPTS=${LDISKFS_MKFS_OPTS% -O large_xattr}
+		reformat
+	fi
+}
+run_test 61 "large xattr"
+
+test_62() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
+	# MRP-118
+	local mdsdev=$(mdsdevname 1)
+	local ostdev=$(ostdevname 1)
+
+	[[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.2.51) ]] ||
+		{ skip "Need MDS version at least 2.2.51"; return 0; }
+
+	echo "disable journal for mds"
+	do_facet mds tune2fs -O ^has_journal $mdsdev || error "tune2fs failed"
+	start_mds && error "MDT start should fail"
+	echo "disable journal for ost"
+	do_facet ost1 tune2fs -O ^has_journal $ostdev || error "tune2fs failed"
+	start_ost && error "OST start should fail"
+	cleanup || return $?
+	reformat_and_config
+}
+run_test 62 "start with disabled journal"
+
+test_63() {
+	if [ $(facet_fstype $SINGLEMDS) != ldiskfs ]; then
+		skip "Only applicable to ldiskfs-based MDTs"
+		return
+	fi
+
+	local inode_slab=$(do_facet $SINGLEMDS \
+		"awk '/ldiskfs_inode_cache/ { print \\\$5 }' /proc/slabinfo")
+	if [ -z "$inode_slab" ]; then
+		skip "ldiskfs module has not been loaded"
+		return
+	fi
+
+	echo "$inode_slab ldisk inodes per page"
+	[ "$inode_slab" -ge "3" ] ||
+		error "ldisk inode size is too big, $inode_slab objs per page"
+	return
+}
+run_test 63 "Verify each page can at least hold 3 ldisk inodes"
+
+test_64() {
 	start_mds
-	do_facet mds "lctl set_param fail_loc=0"
+	start_ost
+	start_ost2 || error "Unable to start second ost"
+	mount_client $MOUNT || error "Unable to mount client"
+	stop_ost2 || error "Unable to stop second ost"
+	echo "$LFS df"
+	$LFS df --lazy || error "lfs df failed"
+	cleanup || return $?
+	#writeconf to remove all ost2 traces for subsequent tests
+	writeconf_or_reformat
+}
+run_test 64 "check lfs df --lazy "
+
+test_65() { # LU-2237
+	# Currently, the test is only valid for ldiskfs backend
+	[ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] &&
+		skip "non-ldiskfs backend" && return
+
+	local devname=$(mdsdevname ${SINGLEMDS//mds/})
+	local brpt=$(facet_mntpt brpt)
+	local opts=""
+
+	if ! do_facet $SINGLEMDS "test -b $devname"; then
+		opts="-o loop"
+	fi
+
+	stop_mds
+	local obj=$(do_facet $SINGLEMDS \
+		    "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" |
+		    grep Inode)
+	if [ -z "$obj" ]; then
+		# The MDT may be just re-formatted, mount the MDT for the
+		# first time to guarantee the "last_rcvd" file is there.
+		start_mds || error "fail to mount the MDS for the first time"
+		stop_mds
+	fi
+
+	# remove the "last_rcvd" file
+	do_facet $SINGLEMDS "mkdir -p $brpt"
+	do_facet $SINGLEMDS \
+		"mount -t $(facet_fstype $SINGLEMDS) $opts $devname $brpt"
+	do_facet $SINGLEMDS "rm -f ${brpt}/last_rcvd"
+	do_facet $SINGLEMDS "umount $brpt"
+
+	# restart MDS, the "last_rcvd" file should be recreated.
+	start_mds || error "fail to restart the MDS"
+	stop_mds
+	obj=$(do_facet $SINGLEMDS \
+	      "$DEBUGFS -c -R \\\"stat last_rcvd\\\" $devname" | grep Inode)
+	[ -n "$obj" ] || error "fail to re-create the last_rcvd"
+}
+run_test 65 "re-create the lost last_rcvd file when server mount"
+
+test_66() {
+	setup
+	local OST1_NID=$(do_facet ost1 $LCTL list_nids | head -1)
+	local MDS_NID=$(do_facet $SINGLEMDS $LCTL list_nids | head -1)
+
+	echo "replace_nids should fail if MDS, OSTs and clients are UP"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+		error "replace_nids fail"
+
+	umount_client $MOUNT || error "unmounting client failed"
+	echo "replace_nids should fail if MDS and OSTs are UP"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+		error "replace_nids fail"
+
+	stop_ost
+	echo "replace_nids should fail if MDS is UP"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID &&
+		error "replace_nids fail"
+
+	stop_mds || error "stopping mds failed"
+
+	if combined_mgs_mds; then
+		start_mds "-o nosvc" ||
+			error "starting mds with nosvc option failed"
+	fi
+
+	echo "command should accept two parameters"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 &&
+		error "command should accept two params"
+
+	echo "correct device name should be passed"
+	do_facet mgs $LCTL replace_nids $FSNAME-WRONG0000 $OST1_NID &&
+		error "wrong devname"
+
+	echo "wrong nids list should not destroy the system"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 "wrong nids list" &&
+		error "wrong parse"
+
+	echo "replace OST nid"
+	do_facet mgs $LCTL replace_nids $FSNAME-OST0000 $OST1_NID ||
+		error "replace nids failed"
+
+	echo "command should accept two parameters"
+	do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 &&
+		error "command should accept two params"
+
+	echo "wrong nids list should not destroy the system"
+	do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 "wrong nids list" &&
+		error "wrong parse"
+
+	echo "replace MDS nid"
+	do_facet mgs $LCTL replace_nids $FSNAME-MDT0000 $MDS_NID ||
+		error "replace nids failed"
+
+	if ! combined_mgs_mds ; then
+		stop_mgs
+	else
+		stop_mds
+	fi
+
+	setup_noconfig
+	check_mount || error "error after nid replace"
+	cleanup
 	reformat
 }
-run_test 58 "missing llog files must not prevent MDT from mounting"
+run_test 66 "replace nids"
+
+test_70a() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	local MDTIDX=1
+
+	start_mdt 1 || error "MDT0 start fail"
+
+	start_ost || error "OST0 start fail"
+
+	start_mdt 2 || error "MDT1 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "create dir fail"
+
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+					error "create remote dir fail"
+
+	rm -rf $DIR/$tdir || error "delete dir fail"
+	cleanup || return $?
+}
+run_test 70a "start MDT0, then OST, then MDT1"
+
+test_70b() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	local MDTIDX=1
+
+	start_ost || error "OST0 start fail"
+
+	start_mdt 1 || error "MDT0 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "create dir fail"
+
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+					error "create remote dir fail"
+
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	cleanup || return $?
+}
+run_test 70b "start OST, MDT1, MDT0"
+
+test_70c() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	local MDTIDX=1
+
+	start_mdt 1 || error "MDT0 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+	start_ost || error "OST0 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+	stop_mdt 1 || error "MDT1 start fail"
+
+	local mdc_for_mdt1=$($LCTL dl | grep MDT0000-mdc | awk '{print $4}')
+	echo "deactivate $mdc_for_mdt1"
+        $LCTL --device $mdc_for_mdt1 deactivate || return 1
+
+	mkdir -p $DIR/$tdir && error "mkdir succeed"
+
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
+					error "create remote dir succeed"
+
+	cleanup || return $?
+}
+run_test 70c "stop MDT0, mkdir fail, create remote dir fail"
+
+test_70d() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	local MDTIDX=1
+
+	start_mdt 1 || error "MDT0 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+	start_ost || error "OST0 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	stop_mdt 2 || error "MDT1 start fail"
+
+	local mdc_for_mdt2=$($LCTL dl | grep MDT0001-mdc |
+			     awk '{print $4}')
+	echo "deactivate $mdc_for_mdt2"
+        $LCTL --device $mdc_for_mdt2 deactivate ||
+			error "set $mdc_for_mdt2 deactivate failed"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir &&
+			error "create remote dir succeed"
+
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	cleanup || return $?
+}
+run_test 70d "stop MDT1, mkdir succeed, create remote dir fail"
+
+test_71a() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	if combined_mgs_mds; then
+		skip "needs separate MGS/MDT" && return
+	fi
+	local MDTIDX=1
+
+	start_mdt 1 || error "MDT0 start fail"
+	start_ost || error "OST0 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+	start_ost2 || error "OST1 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+			error "create remote dir succeed"
+
+	mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	umount_client $MOUNT
+	stop_mdt 1 || error "MDT0 stop fail"
+	stop_mdt 2 || error "MDT1 stop fail"
+	stop_ost || error "OST0 stop fail"
+	stop_ost2 || error "OST1 stop fail"
+}
+run_test 71a "start MDT0 OST0, MDT1, OST1"
+
+test_71b() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	if combined_mgs_mds; then
+		skip "needs separate MGS/MDT" && return
+	fi
+	local MDTIDX=1
+
+	start_mdt 2 || error "MDT1 start fail"
+	start_ost || error "OST0 start fail"
+	start_mdt 1 || error "MDT0 start fail"
+	start_ost2 || error "OST1 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+			error "create remote dir succeed"
+
+	mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	umount_client $MOUNT
+	stop_mdt 1 || error "MDT0 stop fail"
+	stop_mdt 2 || error "MDT1 stop fail"
+	stop_ost || error "OST0 stop fail"
+	stop_ost2 || error "OST1 stop fail"
+}
+run_test 71b "start MDT1, OST0, MDT0, OST1"
+
+test_71c() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	if combined_mgs_mds; then
+		skip "needs separate MGS/MDT" && return
+	fi
+	local MDTIDX=1
+
+	start_ost || error "OST0 start fail"
+	start_ost2 || error "OST1 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+	start_mdt 1 || error "MDT0 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+			error "create remote dir succeed"
+
+	mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	umount_client $MOUNT
+	stop_mdt 1 || error "MDT0 stop fail"
+	stop_mdt 2 || error "MDT1 stop fail"
+	stop_ost || error "OST0 stop fail"
+	stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71c "start OST0, OST1, MDT1, MDT0"
+
+test_71d() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	if combined_mgs_mds; then
+		skip "needs separate MGS/MDT" && return
+	fi
+	local MDTIDX=1
+
+	start_ost || error "OST0 start fail"
+	start_mdt 2 || error "MDT0 start fail"
+	start_mdt 1 || error "MDT0 start fail"
+	start_ost2 || error "OST1 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+			error "create remote dir succeed"
+
+	mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	umount_client $MOUNT
+	stop_mdt 1 || error "MDT0 stop fail"
+	stop_mdt 2 || error "MDT1 stop fail"
+	stop_ost || error "OST0 stop fail"
+	stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71d "start OST0, MDT1, MDT0, OST1"
+
+test_71e() {
+	[ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+	if combined_mgs_mds; then
+		skip "needs separate MGS/MDT" && return
+	fi
+	local MDTIDX=1
+
+	start_ost || error "OST0 start fail"
+	start_mdt 2 || error "MDT1 start fail"
+	start_ost2 || error "OST1 start fail"
+	start_mdt 1 || error "MDT0 start fail"
+
+	mount_client $MOUNT || error "mount client fails"
+
+	mkdir -p $DIR/$tdir || error "mkdir fail"
+	$LFS mkdir -i $MDTIDX $DIR/$tdir/remote_dir ||
+			error "create remote dir succeed"
+
+	mcreate $DIR/$tdir/remote_dir/$tfile || error "create file failed"
+	rm -rf $DIR/$tdir || error "delete dir fail"
+
+	umount_client $MOUNT
+	stop_mdt 1 || error "MDT0 stop fail"
+	stop_mdt 2 || error "MDT1 stop fail"
+	stop_ost || error "OST0 stop fail"
+	stop_ost2 || error "OST1 stop fail"
+
+}
+run_test 71e "start OST0, MDT1, OST1, MDT0"
 
 if ! combined_mgs_mds ; then
 	stop mgs
@@ -2711,5 +3756,5 @@ fi
 
 cleanup_gss
 
-complete $(basename $0) $SECONDS
+complete $SECONDS
 exit_status