*/
+
#include <stdlib.h>
#include <stdio.h>
#include <portals/api-support.h>
{"autoconn_list", jt_ptl_print_autoconnects, 0, "print autoconnect entries\n"
"usage: print_autoconns"},
{"add_autoconn", jt_ptl_add_autoconnect, 0, "add an autoconnect entry\n"
- "usage: add_autoconn <nid> <host> <port> [ixse]"},
+ "usage: add_autoconn <nid> <host> <port> [ise]"},
{"del_autoconn", jt_ptl_del_autoconnect, 0, "remove an autoconnect entry\n"
"usage: del_autoconn [<nid>] [<host>] [ks]"},
{"conn_list", jt_ptl_print_connections, 0, "connect to a remote nid\n"
"usage: print_conns"},
{"connect", jt_ptl_connect, 0, "connect to a remote nid\n"
- "usage: connect <host> <port> [ix]"},
+ "usage: connect <host> <port> [iIOC]"},
{"disconnect", jt_ptl_disconnect, 0, "disconnect from a remote nid\n"
"usage: disconnect [<nid>]"},
{"active_tx", jt_ptl_print_active_txs, 0, "print active transmits (no args)\n"
"usage: mynid [<nid>]"},
{"shownid", jt_ptl_shownid, 0, "print the local NID\n"
"usage: shownid"},
- {"add_uuid", jt_obd_add_uuid, 0, "associate a UUID with a nid\n"
+ {"add_uuid", jt_lcfg_add_uuid, 0, "associate a UUID with a nid\n"
"usage: add_uuid <uuid> <nid> <net_type>"},
{"close_uuid", jt_obd_close_uuid, 0, "disconnect a UUID\n"
"usage: close_uuid <uuid> <net-type>)"},
- {"del_uuid", jt_obd_del_uuid, 0, "delete a UUID association\n"
+ {"del_uuid", jt_lcfg_del_uuid, 0, "delete a UUID association\n"
"usage: del_uuid <uuid>"},
{"add_route", jt_ptl_add_route, 0,
"add an entry to the portals routing table\n"
"usage: del_route <gateway> [<target>] [<target>]"},
{"set_route", jt_ptl_notify_router, 0,
"enable/disable routes via the given gateway in the portals routing table\n"
- "usage: set_gw <gateway> <up/down> [<time>]"},
+ "usage: set_route <gateway> <up/down> [<time>]"},
{"route_list", jt_ptl_print_routes, 0, "print the portals routing table\n"
"usage: route_list"},
{"recv_mem", jt_ptl_rxmem, 0, "set socket receive buffer size, "
/* Device selection commands */
{"=== device selection ===", jt_noop, 0, "device selection"},
- {"newdev", jt_obd_newdev, 0, "create a new device\n"
+ {"newdev", jt_lcfg_newdev, 0, "create a new device\n"
"usage: newdev"},
{"device", jt_obd_device, 0,
"set current device to <%name|$name|devno>\n"
"usage: device <%name|$name|devno>"},
+ {"cfg_device", jt_lcfg_device, 0,
+ "set current device being configured to <$name>\n"
+ "usage: device <name>"},
{"device_list", jt_obd_list, 0, "show all devices\n"
"usage: device_list"},
+ {"dl", jt_obd_list, 0, "show all devices\n"
+ "usage: dl"},
{"lustre_build_version", jt_get_version, 0,
"print the build version of lustre\n"
"usage: lustre_build_version"},
/* Device configuration commands */
{"==== device config =====", jt_noop, 0, "device config"},
- {"attach", jt_obd_attach, 0,
+ {"attach", jt_lcfg_attach, 0,
"set the type of the current device (with <name> and <uuid>)\n"
"usage: attach type [name [uuid]]"},
- {"setup", jt_obd_setup, 0,
+ {"setup", jt_lcfg_setup, 0,
"type specific device configuration information\n"
"usage: setup <args...>"},
{"cleanup", jt_obd_cleanup, 0, "cleanup previously setup device\n"
{"detach", jt_obd_detach, 0,
"remove driver (and name and uuid) from current device\n"
"usage: detach"},
- {"lov_setconfig", jt_obd_lov_setconfig, 0,
- "write lov configuration to an mds device\n"
+ {"lov_setup", jt_lcfg_lov_setup, 0,
+ "write setup an lov device\n"
"usage: lov_setconfig lov-uuid stripe-count stripe-size offset pattern UUID1 [UUID2 ...]"},
{"lov_getconfig", jt_obd_lov_getconfig, 0,
"read lov configuration from an mds device\n"
"usage: lov_getconfig lov-uuid"},
+ {"record", jt_cfg_record, 0, "record commands that follow in log\n"
+ "usage: record cfg-uuid-name"},
+ {"endrecord", jt_cfg_endrecord, 0, "stop recording\n"
+ "usage: endrecord"},
+ {"parse", jt_cfg_parse, 0, "parse the log of recorded commands for this config\n"
+ "usage: parse config-uuid-name"},
+ {"dump_log", jt_cfg_dump_log, 0, "print log of recorded commands for this config to kernel debug log\n"
+ "usage: dump_log config-uuid-name"},
/* Device operations */
{"=== device operations ==", jt_noop, 0, "device operations"},
"disable writes to the underlying device\n"},
{"abort_recovery", jt_obd_abort_recovery, 0,
"abort recovery on MDS device\n"},
- {"mount_option", jt_obd_mount_option, 0,
- "dump mount options to file\n"},
+ {"mount_option", jt_lcfg_mount_option, 0,
+ "usage: mount_option profile osc_name [mdc_name] \n"},
+ {"del_mount_option", jt_lcfg_del_mount_option, 0,
+ "usage: del_mount_option profile\n"},
+ {"set_timeout", jt_lcfg_set_timeout, 0,
+ "usage: set_timeout <secs>\n"},
+ {"set_lustre_upcall", jt_lcfg_set_lustre_upcall, 0,
+ "usage: set_lustre_upcall </full/path/to/upcall> \n"},
+
+ /* Llog operations */
+ {"llog_catlist", jt_llog_catlist, 0,
+ "list all catalog logs on current device.\n"
+ "usage: llog_catlist"},
+ {"llog_info", jt_llog_info, 0,
+ "print log header information.\n"
+ "usage: llog_info <$logname|#oid#ogr#ogen>\n"
+ " oid, ogr and ogen are hexadecimal."},
+ {"llog_print", jt_llog_print, 0,
+ "print log content information.\n"
+ "usage: llog_print <$logname|#oid#ogr#ogen> [from] [to]\n"
+ " oid, ogr and ogen are hexadecimal.\n"
+ " print all records from index 1 by default."},
+ {"llog_check", jt_llog_check, 0,
+ "print log content information.\n"
+ "usage: llog_check <$logname|#oid#ogr#ogen> [from] [to]\n"
+ " oid, ogr and ogen are hexadecimal.\n"
+ " check all records from index 1 by default."},
+ {"llog_cancel", jt_llog_cancel, 0,
+ "cancel one record in log.\n"
+ "usage: llog_cancel <catlog id|catlog name> <log id> <index>"},
+ {"llog_remove", jt_llog_remove, 0,
+ "remove one log from catlog, erase it from disk.\n"
+ "usage: llog_remove <catlog id|catlog name> <log id>"},
/* Debug commands */
{"======== debug =========", jt_noop, 0, "debug"},
"light-weight tracing\n"
"usage: lwt start\n"
" lwt stop [file]"},
+ {"memhog", jt_ptl_memhog, 0,
+ "memory pressure testing\n"
+ "usage: memhog <page count> [<gfp flags>]"},
/* User interface commands */
{"======= control ========", jt_noop, 0, "control commands"},
{ 0, 0, 0, NULL }
};
-
-
-int main(int argc, char **argv)
+int lctl_main(int argc, char **argv)
{
int rc;
rc = Parser_commands();
}
- obd_cleanup(argc, argv);
+ obd_finalize(argc, argv);
return rc;
}
+#if !LIBLUSTRE_TEST
+int main (int argc, char **argv)
+{
+ return (lctl_main (argc, argv));
+}
+#endif
git://git.whamcloud.com / fs / lustre-release.git / blobdiff