export GSS_PIPEFS=false
export IDENTITY_UPCALL=default
export QUOTA_AUTO=1
+export JOBSTATS_AUTO=${JOBSTATS_AUTO:-1}
+export JOBID_VAR=${JOBID_VAR:-"procname_uid"}
# LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
# LOAD_LLOOP is true. LOAD_LLOOP is false by default.
. $LUSTRE/tests/functions.sh
. $LUSTRE/tests/yaml.sh
+export LD_LIBRARY_PATH=${LUSTRE}/utils:${LD_LIBRARY_PATH}
+
LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
}
check_cpt_number() {
+ local facet=$1
local ncpts
- ncpts=$(lctl get_param -n cpu_partition_table 2>/dev/null| wc -l)
+ ncpts=$(do_facet $facet "lctl get_param -n " \
+ "cpu_partition_table 2>/dev/null| wc -l" || echo 1)
+
if [ $ncpts -eq 0 ]; then
echo "1"
else
}
load_modules_local() {
+ [ $(facet_fstype ost1) == "zfs" ] && export USE_OFD=yes
if [ "$USE_OFD" == yes ]; then
if module_loaded obdfilter; then
if ! $LUSTRE_RMMOD ldiskfs; then
grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
- if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
- grep -q exportfs_decode_fh $SYMLIST ||
- { modprobe exportfs 2> /dev/null || true; }
- load_module ../ldiskfs/ldiskfs/ldiskfs
- fi
[ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
+ if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
+ load_module osd-zfs/osd_zfs
+ fi
load_module mgs/mgs
load_module mds/mds
load_module mdd/mdd
+ if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
+ #
+ # This block shall be moved up beside osd-zfs as soon
+ # as osd-ldiskfs stops using mdd symbols.
+ #
+ grep -q exportfs_decode_fh $SYMLIST ||
+ { modprobe exportfs 2> /dev/null || true; }
+ load_module ../ldiskfs/ldiskfs/ldiskfs
+ load_module lvfs/fsfilt_ldiskfs
+ load_module osd-ldiskfs/osd_ldiskfs
+ fi
load_module mdt/mdt
- load_module lvfs/fsfilt_ldiskfs
- load_module cmm/cmm
- load_module osd-ldiskfs/osd_ldiskfs
load_module ost/ost
+ load_module lod/lod
+ load_module osp/osp
if [ "$USE_OFD" == yes ]; then
load_module ofd/ofd
else
echo -n $label
}
+#
+# This and set_obdfilter_param() shall be used to access OSD parameters
+# once existed under "obdfilter":
+#
+# mntdev
+# stats
+# read_cache_enable
+# writethrough_cache_enable
+#
+get_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+
+ do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
+ osd-*.$device.$name 2>&1" | grep -v 'Found no match'
+}
+
+set_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+ local value=$4
+
+ do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
+ osd-*.$device.$name=$value 2>&1" | grep -v 'Found no match'
+}
+
set_debug_size () {
local dz=${1:-$DEBUG_SIZE}
return $RC
}
+#
+# When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
+# Because stopping corresponding target may not clear this in-memory state, we
+# need to zap the pool from memory by exporting and reimporting the pool.
+#
+# Although the uberblocks are not updated when a pool is freezed, transactions
+# are still written to the disks. Modified blocks may be cached in memory when
+# tests try reading them back. The export-and-reimport process also evicts any
+# cached pool data from memory to provide the correct "data loss" semantics.
+#
+refresh_disk() {
+ local facet=$1
+ local fstype=$(facet_fstype $facet)
+ local _dev
+ local dev
+ local poolname
+
+ if [ "${fstype}" == "zfs" ]; then
+ _dev=$(facet_active $facet)_dev
+ dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
+ poolname="${dev%%/*}" # poolname is string before "/"
+
+ if [ "${poolname}" == "" ]; then
+ echo "invalid dataset name: $dev"
+ return
+ fi
+ do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
+ do_facet $facet "$ZPOOL export ${poolname}"
+ do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
+ ${poolname}"
+ fi
+}
+
stop() {
local running
local facet=$1
# save quota version (both administrative and operational quotas)
# add an additional parameter if mountpoint is ever different from $MOUNT
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
quota_save_version() {
local fsname=${2:-$FSNAME}
local spec=$1
done
}
-# client could mount several lustre
+# client could mount several lustre
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
quota_type () {
local fsname=${1:-$FSNAME}
local rc=0
return $rc
}
-restore_quota_type () {
- local mntpt=${1:-$MOUNT}
- local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
- if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
- return
- fi
- quota_save_version $old_QUOTA_TYPE
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+restore_quota_old() {
+ local mntpt=${1:-$MOUNT}
+ local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
+ if [ ! "$old_QUOTA_TYPE" ] ||
+ [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
+ return
+ fi
+ quota_save_version $old_QUOTA_TYPE
}
-setup_quota(){
- local mntpt=$1
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+setup_quota_old(){
+ local mntpt=$1
- if [ "$USE_OFD" = "yes" ]; then
- $LFS quotacheck $mntpt || error "quotacheck failed"
- return
- fi
+ # no quota enforcement for now and accounting works out of the box
+ return
# We need save the original quota_type params, and restore them after testing
done
}
+# get mdt quota type
+mdt_quota_type() {
+ local varsvc=${SINGLEMDS}_svc
+ do_facet $SINGLEMDS $LCTL get_param -n \
+ osd-$FSTYPE.${!varsvc}.quota_slave.enabled
+}
+
+# get ost quota type
+ost_quota_type() {
+ # All OSTs should have same quota type
+ local varsvc=ost1_svc
+ do_facet ost1 $LCTL get_param -n \
+ osd-$FSTYPE.${!varsvc}.quota_slave.enabled
+}
+
+# restore old quota type settings
+restore_quota() {
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ restore_quota_old
+ return
+ fi
+
+ if [ "$old_MDT_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.mdt=$old_MDT_QUOTA_TYPE
+ fi
+ if [ "$old_OST_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.ost=$old_OST_QUOTA_TYPE
+ fi
+}
+
+setup_quota(){
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ setup_quota_old $1
+ return
+ fi
+
+ # XXX remove it once all quota code landed
+ echo "skip quota setup"
+ return
+
+ local mntpt=$1
+
+ # save old quota type & set new quota type
+ local mdt_qtype=$(mdt_quota_type)
+ local ost_qtype=$(ost_quota_type)
+
+ echo "[HOST:$HOSTNAME] [old_mdt_qtype:$mdt_qtype]" \
+ "[old_ost_qtype:$ost_qtype] [new_qtype:$QUOTA_TYPE]"
+
+ export old_MDT_QUOTA_TYPE=$mdt_qtype
+ export old_OST_QUOTA_TYPE=$ost_qtype
+
+ do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$QUOTA_TYPE ||
+ error "set mdt quota type failed"
+ do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$QUOTA_TYPE ||
+ error "set ost quota type failed"
+
+ local quota_usrs=$QUOTA_USERS
+
+ # get_filesystem_size
+ local disksz=$(lfs df $mntpt | grep "filesystem summary:" |
+ awk '{print $3}')
+ local blk_soft=$((disksz + 1024))
+ local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
+
+ local inodes=$(lfs df -i $mntpt | grep "filesystem summary:" |
+ awk '{print $3}')
+ local i_soft=$inodes
+ local i_hard=$((i_soft + i_soft / 20))
+
+ echo "Total disk size: $disksz block-softlimit: $blk_soft" \
+ "block-hardlimit: $blk_hard inode-softlimit: $i_soft" \
+ "inode-hardlimit: $i_hard"
+
+ local cmd
+ for usr in $quota_usrs; do
+ echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
+ for type in u g; do
+ cmd="$LFS setquota -$type $usr -b $blk_soft"
+ cmd="$cmd -B $blk_hard -i $i_soft -I $i_hard $mntpt"
+ echo "+ $cmd"
+ eval $cmd || error "$cmd FAILED!"
+ done
+ # display the quota status
+ echo "Quota settings for $usr : "
+ $LFS quota -v -u $usr $mntpt || true
+ done
+}
+
zconf_mount() {
local client=$1
local mnt=$2
echo $(comma_list $affected)
}
-facet_up () {
- local facet=$1
- local host=${2:-$(facet_host $facet)}
+facet_up() {
+ local facet=$1
+ local host=${2:-$(facet_host $facet)}
- local label=$(convert_facet2label $facet)
- do_node $host lctl dl | awk '{print $4}' | grep -q $label
+ local label=$(convert_facet2label $facet)
+ do_node $host $LCTL dl | awk '{print $4}' | grep -q -x $label
}
facets_up_on_host () {
}
reboot_facet() {
- local facet=$1
- if [ "$FAILURE_MODE" = HARD ]; then
- reboot_node $(facet_active_host $facet)
- else
- sleep 10
- fi
+ local facet=$1
+ if [ "$FAILURE_MODE" = HARD ]; then
+ reboot_node $(facet_active_host $facet)
+ else
+ refresh_disk ${facet}
+ sleep 10
+ fi
}
boot_node() {
return 3
}
-wait_update_facet () {
- local facet=$1
- wait_update $(facet_active_host $facet) "$@"
+wait_update_facet() {
+ local facet=$1
+ shift
+ wait_update $(facet_active_host $facet) "$@"
}
-wait_delete_completed () {
- local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
+sync_all_data() {
+ do_node $(osts_nodes) "lctl set_param -n osd*.*OS*.force_sync 1" 2>&1 |
+ grep -v 'Found no match'
+}
- local WAIT=0
- local MAX_WAIT=20
- while [ "$WAIT" -ne "$MAX_WAIT" ]; do
- sleep 1
- TOTAL=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
- [ "$TOTAL" -eq "$TOTALPREV" ] && return 0
- echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
- TOTALPREV=$TOTAL
- WAIT=$(( WAIT + 1))
- done
- echo "Delete is not completed in $MAX_WAIT sec"
- return 1
+wait_delete_completed_mds() {
+ local MAX_WAIT=${1:-20}
+ local mds2sync=""
+ local stime=`date +%s`
+ local etime
+ local node
+ local changes
+
+ # find MDS with pending deletions
+ for node in $(mdts_nodes); do
+ changes=$(do_node $node "lctl get_param -n osc.*MDT*.sync_*" \
+ 2>/dev/null | calc_sum)
+ if [ -z "$changes" ] || [ $changes -eq 0 ]; then
+ continue
+ fi
+ mds2sync="$mds2sync $node"
+ done
+ if [ "$mds2sync" == "" ]; then
+ return
+ fi
+ mds2sync=$(comma_list $mds2sync)
+
+ # sync MDS transactions
+ do_nodes $mds2sync "lctl set_param -n osd*.*MD*.force_sync 1"
+
+ # wait till all changes are sent and commmitted by OSTs
+ # for ldiskfs space is released upon execution, but DMU
+ # do this upon commit
+
+ local WAIT=0
+ while [ "$WAIT" -ne "$MAX_WAIT" ]; do
+ changes=$(do_nodes $mds2sync "lctl get_param -n osc.*MDT*.sync_*" \
+ | calc_sum)
+ #echo "$node: $changes changes on all"
+ if [ "$changes" -eq "0" ]; then
+ etime=`date +%s`
+ #echo "delete took $((etime - stime)) seconds"
+ return
+ fi
+ sleep 1
+ WAIT=$(( WAIT + 1))
+ done
+
+ etime=`date +%s`
+ echo "Delete is not completed in $((etime - stime)) seconds"
+ do_nodes $mds2sync "lctl get_param osc.*MDT*.sync_*"
}
wait_for_host() {
}
wait_destroy_complete () {
- echo "Waiting for destroy to be done..."
- # MAX value shouldn't be big as this mean server responsiveness
- # never increase this just to make test pass but investigate
- # why it takes so long time
- local MAX=5
- local WAIT=0
- while [ $WAIT -lt $MAX ]; do
- local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
- local con=1
- for ((i=0; i<${#RPCs[@]}; i++)); do
- [ ${RPCs[$i]} -eq 0 ] && continue
- # there are still some destroy RPCs in flight
- con=0
- break;
- done
- sleep 1
- [ ${con} -eq 1 ] && return 0 # done waiting
- echo "Waiting $WAIT secs for destroys to be done."
- WAIT=$((WAIT + 1))
- done
- echo "Destroys weren't done in $MAX sec."
- return 1
+ echo "Waiting for local destroys to complete"
+ # MAX value shouldn't be big as this mean server responsiveness
+ # never increase this just to make test pass but investigate
+ # why it takes so long time
+ local MAX=5
+ local WAIT=0
+ while [ $WAIT -lt $MAX ]; do
+ local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
+ local con=1
+ local i
+
+ for ((i=0; i<${#RPCs[@]}; i++)); do
+ [ ${RPCs[$i]} -eq 0 ] && continue
+ # there are still some destroy RPCs in flight
+ con=0
+ break;
+ done
+ sleep 1
+ [ ${con} -eq 1 ] && return 0 # done waiting
+ echo "Waiting ${WAIT}s for local destroys to complete"
+ WAIT=$((WAIT + 1))
+ done
+ echo "Local destroys weren't done in $MAX sec."
+ return 1
+}
+
+wait_delete_completed() {
+ wait_delete_completed_mds $1 || return $?
+ wait_destroy_complete
}
wait_exit_ST () {
echo "Failing $facet on node $host"
- # Make sure the client data is synced to disk. LU-924
- #
- # We don't write client data synchrnously (to avoid flooding sync writes
- # when there are many clients connecting), so if the server reboots before
- # the client data reachs disk, the client data will be lost and the client
- # will be evicted after recovery, which is not what we expected.
- do_facet $facet "sync; sync; sync"
-
local affected=$(affected_facets $facet)
shutdown_facet $facet
}
fail_abort() {
- local facet=$1
- stop $facet
- change_active $facet
- wait_for_facet $facet
- mount_facet $facet -o abort_recovery
- clients_up || echo "first df failed: $?"
- clients_up || error "post-failover df: $?"
+ local facet=$1
+ stop $facet
+ refresh_disk ${facet}
+ change_active $facet
+ wait_for_facet $facet
+ mount_facet $facet -o abort_recovery
+ clients_up || echo "first df failed: $?"
+ clients_up || error "post-failover df: $?"
}
do_lmc() {
get_env_vars() {
local var
local value
+ local facets=$(get_facets)
+ local facet
for var in ${!MODOPTS_*}; do
value=${!var}
done
echo -n " USE_OFD=$USE_OFD"
+
+ for facet in ${facets//,/ }; do
+ var=${facet}_FSTYPE
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ for var in MGSFSTYPE MDSFSTYPE OSTFSTYPE; do
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ if [ -n "$FSTYPE" ]; then
+ echo -n " FSTYPE=$FSTYPE"
+ fi
}
do_nodes() {
do_node $HOST "$@"
}
+# Function: do_facet_random_file $FACET $FILE $SIZE
+# Creates FILE with random content on the given FACET of given SIZE
+
+do_facet_random_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/urandom of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
+do_facet_create_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/zero of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
do_nodesv() {
do_nodes --verbose "$@"
}
}
init_param_vars () {
- remote_mds_nodsh ||
- TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
+ remote_mds_nodsh ||
+ TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
- log "Using TIMEOUT=$TIMEOUT"
+ log "Using TIMEOUT=$TIMEOUT"
- osc_ensure_active $SINGLEMDS $TIMEOUT
- osc_ensure_active client $TIMEOUT
+ osc_ensure_active $SINGLEMDS $TIMEOUT
+ osc_ensure_active client $TIMEOUT
- if [ $QUOTA_AUTO -ne 0 ]; then
- if [ "$ENABLE_QUOTA" ]; then
- echo "enable quota as required"
- setup_quota $MOUNT || return 2
- else
- echo "disable quota as required"
- $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
- fi
- fi
+ local jobid_var
+ if [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ]; then
+ jobid_var="none"
+ elif [ $JOBSTATS_AUTO -ne 0 ]; then
+ echo "enable jobstats, set job scheduler as $JOBID_VAR"
+ jobid_var=$JOBID_VAR
+ else
+ jobid_var=`$LCTL get_param -n jobid_var`
+ if [ $jobid_var != "disable" ]; then
+ echo "disable jobstats as required"
+ jobid_var="disable"
+ else
+ jobid_var="none"
+ fi
+ fi
- return 0
+ if [ $jobid_var == $JOBID_VAR -o $jobid_var == "disable" ]; then
+ do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$jobid_var
+ wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
+ $jobid_var || return 1
+ fi
+
+ if [ $QUOTA_AUTO -ne 0 ]; then
+ if [ "$ENABLE_QUOTA" ]; then
+ echo "enable quota as required"
+ setup_quota $MOUNT || return 2
+ else
+ echo "disable quota as required"
+ # $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
+ fi
+ fi
+ return 0
}
nfs_client_mode () {
# Get all of the server target devices from a given server node and type.
get_mnt_devs() {
- local node=$1
- local type=$2
- local obd_type
- local devs
- local dev
-
- case $type in
- mdt) obd_type="osd" ;;
- ost) obd_type="obdfilter" ;; # needs to be fixed when OST also uses an OSD
- *) echo "invalid server type" && return 1 ;;
- esac
+ local node=$1
+ local type=$2
+ local devs
+ local dev
- devs=$(do_node $node "lctl get_param -n $obd_type*.*.mntdev")
- for dev in $devs; do
- case $dev in
- *loop*) do_node $node "losetup $dev" | \
- sed -e "s/.*(//" -e "s/).*//" ;;
- *) echo $dev ;;
- esac
- done
+ if [ "$type" == ost ]; then
+ devs=$(get_obdfilter_param $node "" mntdev)
+ else
+ devs=$(do_node $node \
+ "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
+ fi
+ for dev in $devs; do
+ case $dev in
+ *loop*) do_node $node "losetup $dev" | \
+ sed -e "s/.*(//" -e "s/).*//" ;;
+ *) echo $dev ;;
+ esac
+ done
}
# Get all of the server target devices.
local ostidx
local dev
+ [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
+ { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
+
check_shared_dir $SHARED_DIRECTORY ||
error "$SHARED_DIRECTORY isn't a shared directory"
run_lfsck
fi
- if is_mounted $MOUNT; then
- [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
- error "remove sub-test dirs failed"
- [ "$ENABLE_QUOTA" ] && restore_quota_type || true
- fi
+ if is_mounted $MOUNT; then
+ [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
+ error "remove sub-test dirs failed"
+ [ "$ENABLE_QUOTA" ] && restore_quota || true
+ fi
if [ "$I_UMOUNTED2" = "yes" ]; then
restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
at_get $1 at_max
}
+at_min_get() {
+ at_get $1 at_min
+}
+
at_max_set() {
local at_max=$1
shift
debugrestore
}
+# prints bash call stack
+log_trace_dump() {
+ echo " Trace dump:"
+ for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
+ local s=${BASH_SOURCE[$i]}
+ local l=${BASH_LINENO[$i-1]}
+ local f=${FUNCNAME[$i]}
+ echo " = $s:$l:$f()"
+ done
+}
+
##################################
# Test interface
##################################
fi
log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
+ log_trace_dump
mkdir -p $LOGDIR
# We need to dump the logs on all nodes
}
exit_status () {
- local status=0
- local log=$TESTSUITELOG
+ local status=0
+ local log=$TESTSUITELOG
- [ -f "$log" ] && grep -q FAIL: $log && status=1
- exit $status
+ [ -f "$log" ] && grep -q FAIL $log && status=1
+ exit $status
}
error() {
error_noexit "$@"
}
+error_and_remount() {
+ error_noexit "$@"
+ remount_client $MOUNT
+ exit 1
+}
+
skip_env () {
$FAIL_ON_SKIP_ENV && error false $@ || skip $@
}
-skip () {
- echo
- log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
- [ "$ALWAYS_SKIPPED" ] && \
- skip_logged ${TESTNAME} "$@" || true
- [ "$TESTSUITELOG" ] && \
- echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
+skip() {
+ echo
+ log " SKIP: $TESTSUITE $TESTNAME $@"
+
+ if [[ -n "$ALWAYS_SKIPPED" ]]; then
+ skip_logged $TESTNAME "$@"
+ else
+ mkdir -p $LOGDIR
+ echo "$@" > $LOGDIR/skip
+ fi
+
+ [[ -n "$TESTSUITELOG" ]] &&
+ echo "$TESTSUITE: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
}
build_test_filter() {
echo -n "."
return 0
fi
+
+ LAST_SKIPPED="y"
+ ALWAYS_SKIPPED="y"
testname=EXCEPT_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1"
return 0
fi
testname=EXCEPT_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_ALWAYS_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
- ALWAYS_SKIPPED="y"
TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
return 0
fi
testname=EXCEPT_ALWAYS_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
- ALWAYS_SKIPPED="y"
TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_SLOW_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1"
return 0
fi
testname=EXCEPT_SLOW_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
return 0
fi
}
pass() {
- # Set TEST_STATUS here; will be used for logging the result
- if [ -f $LOGDIR/err ]; then
- TEST_STATUS="FAIL"
- else
- TEST_STATUS="PASS"
- fi
- echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
+ # Set TEST_STATUS here. It will be used for logging the result.
+ TEST_STATUS="PASS"
+
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_STATUS="FAIL"
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_STATUS="SKIP"
+ fi
+ echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
}
check_mds() {
run_one() {
local testnum=$1
local message=$2
- tfile=f${testnum}
+ tfile=f.${TESTSUITE}.${testnum}
export tdir=d0.${TESTSUITE}/d${base}
export TESTNAME=test_$testnum
local SAVE_UMASK=`umask`
# - test result is saved to data file
#
run_one_logged() {
- local BEFORE=`date +%s`
- local TEST_ERROR
- local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
- local test_log=$LOGDIR/$name
- rm -rf $LOGDIR/err
- local SAVE_UMASK=`umask`
- umask 0022
-
- echo
- log_sub_test_begin test_${1}
- (run_one $1 "$2") 2>&1 | tee -i $test_log
- local RC=${PIPESTATUS[0]}
-
- [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
- echo "test_$1 returned $RC" | tee $LOGDIR/err
-
- duration=$((`date +%s` - $BEFORE))
- pass "$1" "(${duration}s)"
- [ -f $LOGDIR/err ] && TEST_ERROR=$(cat $LOGDIR/err)
- log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
+ local BEFORE=`date +%s`
+ local TEST_ERROR
+ local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
+ local test_log=$LOGDIR/$name
+ rm -rf $LOGDIR/err
+ rm -rf $LOGDIR/skip
+ local SAVE_UMASK=`umask`
+ umask 0022
+
+ echo
+ log_sub_test_begin test_${1}
+ (run_one $1 "$2") 2>&1 | tee -i $test_log
+ local RC=${PIPESTATUS[0]}
+
+ [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
+ echo "test_$1 returned $RC" | tee $LOGDIR/err
+
+ duration=$((`date +%s` - $BEFORE))
+ pass "$1" "(${duration}s)"
+
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_ERROR=$(cat $LOGDIR/err)
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_ERROR=$(cat $LOGDIR/skip)
+ fi
+ log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
- if [ -f $LOGDIR/err ]; then
- $FAIL_ON_ERROR && exit $RC
- fi
+ if [ -f $LOGDIR/err ]; then
+ $FAIL_ON_ERROR && exit $RC
+ fi
- umask $SAVE_UMASK
+ umask $SAVE_UMASK
- return $RC
+ return 0
}
#
# Print information of skipped tests to result.yml
#
skip_logged(){
- log_sub_test_begin $1
- log_sub_test_end "SKIP" "0" "0" "\"$2\""
+ log_sub_test_begin $1
+ shift
+ log_sub_test_end "SKIP" "0" "0" "$@"
}
canonical_path() {
do_nodev $nfsserver lfs setstripe "$@"
}
+# Check and add a test group.
+add_group() {
+ local group_id=$1
+ local group_name=$2
+ local rc=0
+
+ local gid=$(getent group $group_name | cut -d: -f3)
+ if [[ -n "$gid" ]]; then
+ [[ "$gid" -eq "$group_id" ]] || {
+ error_noexit "inconsistent group ID:" \
+ "new: $group_id, old: $gid"
+ rc=1
+ }
+ else
+ groupadd -g $group_id $group_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
+# Check and add a test user.
+add_user() {
+ local user_id=$1
+ shift
+ local user_name=$1
+ shift
+ local group_name=$1
+ shift
+ local home=$1
+ shift
+ local opts="$@"
+ local rc=0
+
+ local uid=$(getent passwd $user_name | cut -d: -f3)
+ if [[ -n "$uid" ]]; then
+ if [[ "$uid" -eq "$user_id" ]]; then
+ local dir=$(getent passwd $user_name | cut -d: -f6)
+ if [[ "$dir" != "$home" ]]; then
+ mkdir -p $home
+ usermod -d $home $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+ else
+ error_noexit "inconsistent user ID:" \
+ "new: $user_id, old: $uid"
+ rc=1
+ fi
+ else
+ mkdir -p $home
+ useradd -M -u $user_id -d $home -g $group_name $opts $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
check_runas_id_ret() {
local myRC=0
local myRUNAS_UID=$1
}
oos_full() {
- local -a AVAILA
- local -a GRANTA
- local OSCFULL=1
- AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param obdfilter.*.kbytesavail))
- GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param -n obdfilter.*.tot_granted))
- for ((i=0; i<${#AVAILA[@]}; i++)); do
- local -a AVAIL1=(${AVAILA[$i]//=/ })
- GRANT=$((${GRANTA[$i]}/1024))
- echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} grnt=$GRANT diff=$((AVAIL1[1] - GRANT))
- [ $((AVAIL1[1] - GRANT)) -lt 400 ] && OSCFULL=0 && echo " FULL" || echo
- done
- return $OSCFULL
+ local -a AVAILA
+ local -a GRANTA
+ local -a TOTALA
+ local OSCFULL=1
+ AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param obdfilter.*.kbytesavail))
+ GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.tot_granted))
+ TOTALA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.kbytestotal))
+ for ((i=0; i<${#AVAILA[@]}; i++)); do
+ local -a AVAIL1=(${AVAILA[$i]//=/ })
+ local -a TOTAL=(${TOTALA[$i]//=/ })
+ GRANT=$((${GRANTA[$i]}/1024))
+ # allow 1% of total space in bavail because of delayed
+ # allocation with ZFS which might release some free space after
+ # txg commit. For small devices, we set a mininum of 8MB
+ local LIMIT=$((${TOTAL} / 100 + 8000))
+ echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} \
+ grnt=$GRANT diff=$((AVAIL1[1] - GRANT)) limit=${LIMIT}
+ [ $((AVAIL1[1] - GRANT)) -lt $LIMIT ] && OSCFULL=0 && \
+ echo " FULL" || echo
+ done
+ return $OSCFULL
}
pool_list () {