[ "$layout1" == "$layout2" ] ||
error "$msg_prefix $src/$dst layouts are not equal"
}
+
+is_project_quota_supported() {
+ $ENABLE_PROJECT_QUOTAS || return 1
+ [ "$(facet_fstype $SINGLEMDS)" == "ldiskfs" ] &&
+ [ $(lustre_version_code $SINGLEMDS) -gt \
+ $(version_code 2.9.55) ] &&
+ lfs --help | grep project >&/dev/null &&
+ egrep -q "7." /etc/redhat-release && return 0
+
+ if [ "$(facet_fstype $SINGLEMDS)" == "zfs" ]; then
+ [ $(lustre_version_code $SINGLEMDS) -le \
+ $(version_code 2.10.53) ] && return 1
+
+ do_fact mds1 $ZPOOL upgrade -v |
+ grep project_quota && return 0
+ fi
+
+ return 1
+}
+
+enable_project_quota() {
+ is_project_quota_supported || return 0
+ [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] && return 0
+ stopall || error "failed to stopall (1)"
+
+ for num in $(seq $MDSCOUNT); do
+ do_facet mds$num $TUNE2FS -O project $(mdsdevname $num) ||
+ error "tune2fs $(mdsdevname $num) failed"
+ done
+
+ for num in $(seq $OSTCOUNT); do
+ do_facet ost$num $TUNE2FS -O project $(ostdevname $num) ||
+ error "tune2fs $(ostdevname $num) failed"
+ done
+
+ mount
+ setupall
+}
+
+disable_project_quota() {
+ is_project_quota_supported || return 0
+ [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] && return 0
+ stopall || error "failed to stopall (1)"
+
+ for num in $(seq $MDSCOUNT); do
+ do_facet mds$num $TUNE2FS -Q ^prj $(mdsdevname $num) ||
+ error "tune2fs $(mdsdevname $num) failed"
+ done
+
+ for num in $(seq $OSTCOUNT); do
+ do_facet ost$num $TUNE2FS -Q ^prj $(ostdevname $num) ||
+ error "tune2fs $(ostdevname $num) failed"
+ done
+
+ mount
+ setupall
+}
+
+#
+# In order to test multiple remote HSM agents, a new facet type named "AGT" and
+# the following associated variables are added:
+#
+# AGTCOUNT: number of agents
+# AGTDEV{N}: target HSM mount point (root path of the backend)
+# agt{N}_HOST: hostname of the agent agt{N}
+# SINGLEAGT: facet of the single agent
+#
+# The number of agents is initialized as the number of remote client nodes.
+# By default, only single copytool is started on a remote client/agent. If there
+# was no remote client, then the copytool will be started on the local client.
+#
+init_agt_vars() {
+ local n
+ local agent
+
+ export AGTCOUNT=${AGTCOUNT:-$((CLIENTCOUNT - 1))}
+ [[ $AGTCOUNT -gt 0 ]] || AGTCOUNT=1
+
+ export SHARED_DIRECTORY=${SHARED_DIRECTORY:-$TMP}
+ if [[ $CLIENTCOUNT -gt 1 ]] &&
+ ! check_shared_dir $SHARED_DIRECTORY $CLIENTS; then
+ skip_env "SHARED_DIRECTORY should be accessible"\
+ "on all client nodes"
+ exit 0
+ fi
+
+ # We used to put the HSM archive in $SHARED_DIRECTORY but that
+ # meant NFS issues could hose sanity-hsm sessions. So now we
+ # use $TMP instead.
+ for n in $(seq $AGTCOUNT); do
+ eval export AGTDEV$n=\$\{AGTDEV$n:-"$TMP/arc$n"\}
+ agent=CLIENT$((n + 1))
+ if [[ -z "${!agent}" ]]; then
+ [[ $CLIENTCOUNT -eq 1 ]] && agent=CLIENT1 ||
+ agent=CLIENT2
+ fi
+ eval export agt${n}_HOST=\$\{agt${n}_HOST:-${!agent}\}
+ local var=agt${n}_HOST
+ [[ ! -z "${!var}" ]] || error "agt${n}_HOST is empty!"
+ done
+
+ export SINGLEAGT=${SINGLEAGT:-agt1}
+
+ export HSMTOOL=${HSMTOOL:-"lhsmtool_posix"}
+ export HSMTOOL_VERBOSE=${HSMTOOL_VERBOSE:-""}
+ export HSMTOOL_UPDATE_INTERVAL=${HSMTOOL_UPDATE_INTERVAL:=""}
+ export HSMTOOL_EVENT_FIFO=${HSMTOOL_EVENT_FIFO:=""}
+ export HSMTOOL_TESTDIR
+ export HSMTOOL_BASE=$(basename "$HSMTOOL" | cut -f1 -d" ")
+
+ HSM_ARCHIVE_NUMBER=2
+
+ # The test only support up to 10 MDTs
+ MDT_PREFIX="mdt.$FSNAME-MDT000"
+ HSM_PARAM="${MDT_PREFIX}0.hsm"
+
+ # archive is purged at copytool setup
+ HSM_ARCHIVE_PURGE=true
+
+ # Don't allow copytool error upon start/setup
+ HSMTOOL_NOERROR=false
+}
+
+# Get the backend root path for the given agent facet.
+copytool_device() {
+ local facet=$1
+ local dev=AGTDEV$(facet_number $facet)
+
+ echo -n ${!dev}
+}
+
+get_mdt_devices() {
+ local mdtno
+ # get MDT device for each mdc
+ for mdtno in $(seq 1 $MDSCOUNT); do
+ local idx=$(($mdtno - 1))
+ MDT[$idx]=$($LCTL get_param -n \
+ mdc.$FSNAME-MDT000${idx}-mdc-*.mds_server_uuid |
+ awk '{gsub(/_UUID/,""); print $1}' | head -n1)
+ done
+}
+
+search_copytools() {
+ local hosts=${1:-$(facet_active_host $SINGLEAGT)}
+ do_nodesv $hosts "pgrep -x $HSMTOOL_BASE"
+}
+
+kill_copytools() {
+ local hosts=${1:-$(facet_active_host $SINGLEAGT)}
+
+ echo "Killing existing copytools on $hosts"
+ do_nodesv $hosts "killall -q $HSMTOOL_BASE" || true
+}
+
+wait_copytools() {
+ local hosts=${1:-$(facet_active_host $SINGLEAGT)}
+ local wait_timeout=200
+ local wait_start=$SECONDS
+ local wait_end=$((wait_start + wait_timeout))
+ local sleep_time=100000 # 0.1 second
+
+ while ((SECONDS < wait_end)); do
+ if ! search_copytools $hosts; then
+ echo "copytools stopped in $((SECONDS - wait_start))s"
+ return 0
+ fi
+
+ echo "copytools still running on $hosts"
+ usleep $sleep_time
+ [ $sleep_time -lt 32000000 ] && # 3.2 seconds
+ sleep_time=$(bc <<< "$sleep_time * 2")
+ done
+
+ # try to dump Copytool's stack
+ do_nodesv $hosts "echo 1 >/proc/sys/kernel/sysrq ; " \
+ "echo t >/proc/sysrq-trigger"
+
+ echo "copytools failed to stop in ${wait_timeout}s"
+
+ return 1
+}
+
+copytool_monitor_cleanup() {
+ local facet=${1:-$SINGLEAGT}
+ local agent=$(facet_active_host $facet)
+
+ if [ -n "$HSMTOOL_MONITOR_DIR" ]; then
+ # Should die when the copytool dies, but just in case.
+ local cmd="kill \\\$(cat $HSMTOOL_MONITOR_DIR/monitor_pid)"
+ cmd+=" 2>/dev/null || true"
+ do_node $agent "$cmd"
+ do_node $agent "rm -fr $HSMTOOL_MONITOR_DIR"
+ export HSMTOOL_MONITOR_DIR=
+ fi
+
+ # The pdsh should die on its own when the monitor dies. Just
+ # in case, though, try to clean up to avoid any cruft.
+ if [ -n "$HSMTOOL_MONITOR_PDSH" ]; then
+ kill $HSMTOOL_MONITOR_PDSH 2>/dev/null || true
+ export HSMTOOL_MONITOR_PDSH=
+ fi
+}
+
+copytool_logfile()
+{
+ local host="$(facet_host "$1")"
+ local prefix=$TESTLOG_PREFIX
+ [ -n "$TESTNAME" ] && prefix+=.$TESTNAME
+
+ printf "${prefix}.copytool${archive_id}_log.${host}.log"
+}
+
+__lhsmtool_rebind()
+{
+ do_facet $facet $HSMTOOL -p "$hsm_root" --rebind "$@" "$mountpoint"
+}
+
+__lhsmtool_import()
+{
+ mkdir -p "$(dirname "$2")" ||
+ error "cannot create directory '$(dirname "$2")'"
+ do_facet $facet $HSMTOOL -p "$hsm_root" --import "$@" "$mountpoint"
+}
+
+__lhsmtool_setup()
+{
+ local cmd="$HSMTOOL $HSMTOOL_VERBOSE --daemon --hsm-root \"$hsm_root\""
+ [ -n "$bandwidth" ] && cmd+=" --bandwidth $bandwidth"
+ [ -n "$archive_id" ] && cmd+=" --archive $archive_id"
+ [ ${#misc_options[@]} -gt 0 ] &&
+ cmd+=" $(IFS=" " echo "$@")"
+ cmd+=" \"$mountpoint\""
+
+ echo "Starting copytool $facet on $(facet_host $facet)"
+ stack_trap "do_facet $facet libtool execute pkill -x '$HSMTOOL' || true" EXIT
+ do_facet $facet "$cmd < /dev/null > \"$(copytool_logfile $facet)\" 2>&1"
+}
+
+hsm_root() {
+ local facet="${1:-$SINGLEAGT}"
+
+ printf "$(copytool_device "$facet")/${TESTSUITE}.${TESTNAME}/"
+}
+
+# Main entry point to perform copytool related operations
+#
+# Sub-commands:
+#
+# setup setup a copytool to run in the background, that copytool will be
+# killed on EXIT
+# import import a file from an HSM backend
+# rebind rebind an archived file to a new fid
+#
+# Although the semantics might suggest otherwise, one does not need to 'setup'
+# a copytool before a call to 'copytool import' or 'copytool rebind'.
+#
+copytool()
+{
+ local action=$1
+ shift
+
+ # Parse arguments
+ local fail_on_error=true
+ local -a misc_options
+ while [ $# -gt 0 ]; do
+ case "$1" in
+ -f|--facet)
+ shift
+ local facet="$1"
+ ;;
+ -m|--mountpoint)
+ shift
+ local mountpoint="$1"
+ ;;
+ -a|--archive-id)
+ shift
+ local archive_id="$1"
+ ;;
+ -b|--bwlimit)
+ shift
+ local bandwidth="$1" # in MB/s
+ ;;
+ -n|--no-fail)
+ local fail_on_error=false
+ ;;
+ *)
+ # Uncommon(/copytool dependent) option
+ misc_options+=("$1")
+ ;;
+ esac
+ shift
+ done
+
+ # Use default values if needed
+ local facet=${facet:-$SINGLEAGT}
+ local mountpoint="${mountpoint:-${MOUNT2:-$MOUNT}}"
+ local hsm_root="$(hsm_root "$facet")"
+
+ stack_trap "do_facet $facet rm -rf '$hsm_root'" EXIT
+ do_facet $facet mkdir -p "$hsm_root" ||
+ error "mkdir '$hsm_root' failed"
+
+ case "$HSMTOOL" in
+ lhsmtool_posix)
+ local copytool=lhsmtool
+ ;;
+ esac
+
+ __${copytool}_${action} "${misc_options[@]}"
+ if [ $? -ne 0 ]; then
+ local error_msg
+
+ case $action in
+ setup)
+ local host="$(facet_host $facet)"
+ error_msg="Failed to start copytool $facet on '$host'"
+ ;;
+ import)
+ local src="${misc_options[0]}"
+ local dest="${misc_options[1]}"
+ error_msg="Failed to import '$src' to '$dest'"
+ ;;
+ rebind)
+ error_msg="could not rebind file"
+ ;;
+ esac
+
+ $fail_on_error && error "$error_msg" || echo "$error_msg"
+ fi
+}
+
+needclients() {
+ local client_count=$1
+ if [[ $CLIENTCOUNT -lt $client_count ]]; then
+ skip "Need $client_count or more clients, have $CLIENTCOUNT"
+ return 1
+ fi
+ return 0
+}
+
+path2fid() {
+ $LFS path2fid $1 | tr -d '[]'
+ return ${PIPESTATUS[0]}
+}
+
+get_hsm_flags() {
+ local f=$1
+ local u=$2
+ local st
+
+ if [[ $u == "user" ]]; then
+ st=$($RUNAS $LFS hsm_state $f)
+ else
+ u=root
+ st=$($LFS hsm_state $f)
+ fi
+
+ [[ $? == 0 ]] || error "$LFS hsm_state $f failed (run as $u)"
+
+ st=$(echo $st | cut -f 2 -d" " | tr -d "()," )
+ echo $st
+}
+
+check_hsm_flags() {
+ local f=$1
+ local fl=$2
+
+ local st=$(get_hsm_flags $f)
+ [[ $st == $fl ]] || error "hsm flags on $f are $st != $fl"
+}
+
+mdts_set_param() {
+ local arg=$1
+ local key=$2
+ local value=$3
+ local mdtno
+ local rc=0
+ if [[ "$value" != "" ]]; then
+ value="=$value"
+ fi
+ for mdtno in $(seq 1 $MDSCOUNT); do
+ local idx=$(($mdtno - 1))
+ local facet=mds${mdtno}
+ # if $arg include -P option, run 1 set_param per MDT on the MGS
+ # else, run set_param on each MDT
+ [[ $arg = *"-P"* ]] && facet=mgs
+ do_facet $facet $LCTL set_param $arg mdt.${MDT[$idx]}.$key$value
+ [[ $? != 0 ]] && rc=1
+ done
+ return $rc
+}
+
+wait_result() {
+ local facet=$1
+ shift
+ wait_update --verbose $(facet_active_host $facet) "$@"
+}
+
+mdts_check_param() {
+ local key="$1"
+ local target="$2"
+ local timeout="$3"
+ local mdtno
+ for mdtno in $(seq 1 $MDSCOUNT); do
+ local idx=$(($mdtno - 1))
+ wait_result mds${mdtno} \
+ "$LCTL get_param -n $MDT_PREFIX${idx}.$key" "$target" \
+ $timeout ||
+ error "$key state is not '$target' on mds${mdtno}"
+ done
+}
+
+cdt_set_mount_state() {
+ mdts_set_param "-P" hsm_control "$1"
+ # set_param -P is asynchronous operation and could race with set_param.
+ # In such case configs could be retrieved and applied at mgc after
+ # set_param -P completion. Sleep here to avoid race with set_param.
+ # We need at least 20 seconds. 10 for mgc_requeue_thread to wake up
+ # MGC_TIMEOUT_MIN_SECONDS + MGC_TIMEOUT_RAND_CENTISEC(5 + 5)
+ # and 10 seconds to retrieve config from server.
+ sleep 20
+}
+
+cdt_check_state() {
+ mdts_check_param hsm_control "$1" 20
+}
+
+cdt_set_sanity_policy() {
+ if [[ "$CDT_POLICY_HAD_CHANGED" ]]
+ then
+ # clear all
+ mdts_set_param "" hsm.policy "+NRA"
+ mdts_set_param "" hsm.policy "-NBR"
+ CDT_POLICY_HAD_CHANGED=
+ fi
+}
+
+set_hsm_param() {
+ local param=$1
+ local value=$2
+ local opt=$3
+ mdts_set_param "$opt -n" "hsm.$param" "$value"
+ return $?
+}
+
+wait_request_state() {
+ local fid=$1
+ local request=$2
+ local state=$3
+ # 4th arg (mdt index) is optional
+ local mdtidx=${4:-0}
+ local mds=mds$(($mdtidx + 1))
+
+ local cmd="$LCTL get_param -n ${MDT_PREFIX}${mdtidx}.hsm.actions"
+ cmd+=" | awk '/'$fid'.*action='$request'/ {print \\\$13}' | cut -f2 -d="
+
+ wait_result $mds "$cmd" "$state" 200 ||
+ error "request on $fid is not $state on $mds"
+}
+
+
+rmultiop_start() {
+ local client=$1
+ local file=$2
+ local cmds=$3
+ local WAIT_MAX=${4:-60}
+ local wait_time=0
+
+ # We need to run do_node in bg, because pdsh does not exit
+ # if child process of run script exists.
+ # I.e. pdsh does not exit when runmultiop_bg_pause exited,
+ # because of multiop_bg_pause -> $MULTIOP_PROG &
+ # By the same reason we need sleep a bit after do_nodes starts
+ # to let runmultiop_bg_pause start muliop and
+ # update /tmp/multiop_bg.pid ;
+ # The rm /tmp/multiop_bg.pid guarantees here that
+ # we have the updated by runmultiop_bg_pause
+ # /tmp/multiop_bg.pid file
+
+ local pid_file=$TMP/multiop_bg.pid.$$
+
+ do_node $client "MULTIOP_PID_FILE=$pid_file LUSTRE= \
+ runmultiop_bg_pause $file $cmds" &
+ local pid=$!
+ local multiop_pid
+
+ while [[ $wait_time -lt $WAIT_MAX ]]; do
+ sleep 3
+ wait_time=$((wait_time + 3))
+ multiop_pid=$(do_node $client cat $pid_file)
+ if [ -n "$multiop_pid" ]; then
+ break
+ fi
+ done
+
+ [ -n "$multiop_pid" ] ||
+ error "$client : Can not get multiop_pid from $pid_file "
+
+ eval export $(node_var_name $client)_multiop_pid=$multiop_pid
+ eval export $(node_var_name $client)_do_node_pid=$pid
+ local var=$(node_var_name $client)_multiop_pid
+ echo client $client multiop_bg started multiop_pid=${!var}
+ return $?
+}
+
+rmultiop_stop() {
+ local client=$1
+ local multiop_pid=$(node_var_name $client)_multiop_pid
+ local do_node_pid=$(node_var_name $client)_do_node_pid
+
+ echo "Stopping multiop_pid=${!multiop_pid} (kill ${!multiop_pid} on $client)"
+ do_node $client kill -USR1 ${!multiop_pid}
+
+ wait ${!do_node_pid}
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff