fi
export RSYNC_RSH=${RSYNC_RSH:-rsh}
+ export LNETCTL=${LNETCTL:-"$LUSTRE/../lnet/utils/lnetctl"}
+ [ ! -f "$LNETCTL" ] && export LNETCTL=$(which lnetctl 2> /dev/null)
export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
[ ! -f "$LCTL" ] && export LCTL=$(which lctl)
export LFS=${LFS:-"$LUSTRE/utils/lfs"}
[ ! -f "$LFS" ] && export LFS=$(which lfs)
+ export KSOCKLND_CONFIG=${KSOCKLND_CONFIG:-"$LUSTRE/scripts/ksocklnd-config"}
+ [ ! -f "$KSOCKLND_CONFIG" ] &&
+ export KSOCKLND_CONFIG=$(which ksocklnd-config 2> /dev/null)
export PERM_CMD=${PERM_CMD:-"$LCTL conf_param"}
# Constants used in more than one test script
export LOV_MAX_STRIPE_COUNT=2000
+ export DELETE_OLD_POOLS=${DELETE_OLD_POOLS:-false}
+ export KEEP_POOLS=${KEEP_POOLS:-false}
export MACHINEFILE=${MACHINEFILE:-$TMP/$(basename $0 .sh).machines}
. ${CONFIG:=$LUSTRE/tests/cfg/$NAME.sh}
get_lustre_env
# use localrecov to enable recovery for local clients, LU-12722
- [[ $MDS1_VERSION -lt $(version_code 2.13.52) ]] ||
+ [[ $MDS1_VERSION -lt $(version_code 2.13.52) ]] || {
export MDS_MOUNT_OPTS=${MDS_MOUNT_OPTS:-"-o localrecov"}
+ export MGS_MOUNT_OPTS=${MGS_MOUNT_OPTS:-"-o localrecov"}
+ }
+
[[ $OST1_VERSION -lt $(version_code 2.13.52) ]] ||
export OST_MOUNT_OPTS=${OST_MOUNT_OPTS:-"-o localrecov"}
}
/sbin/lsmod | grep -q "^\<$1\>"
}
+check_lfs_df_ret_val() {
+ # Ignore only EOPNOTSUPP (which is 95; Operation not supported) error
+ # returned by 'lfs df' for valid dentry but not a lustrefs.
+ #
+ # 'lfs df' historically always returned success(0) instead of
+ # EOPNOTSUPP. This function for compatibility reason, ignores and
+ # masquerades EOPNOTSUPP as success.
+ [[ $1 -eq 95 ]] && return 0
+ return $1
+}
+
PRLFS=false
lustre_insmod() {
local module=$1
# that obviously has nothing to do with this Lustre run
# Disable automatic memory scanning to avoid perf hit.
if [ -f /sys/kernel/debug/kmemleak ] ; then
- echo scan=off > /sys/kernel/debug/kmemleak
- echo scan > /sys/kernel/debug/kmemleak
- echo clear > /sys/kernel/debug/kmemleak
+ echo scan=off > /sys/kernel/debug/kmemleak || true
+ echo scan > /sys/kernel/debug/kmemleak || true
+ echo clear > /sys/kernel/debug/kmemleak || true
fi
echo Loading modules from $LUSTRE
fi
load_module ../lnet/klnds/$LNETLND
load_module obdclass/obdclass
+ MODOPTS_PTLRPC=${MODOPTS_PTLRPC:-"lbug_on_grant_miscount=1"}
load_module ptlrpc/ptlrpc
load_module ptlrpc/gss/ptlrpc_gss
load_module fld/fld
fi
}
-unload_modules() {
- wait_exit_ST client # bug 12845
-
+unload_modules_local() {
$LUSTRE_RMMOD ldiskfs || return 2
[ -f /etc/udev/rules.d/99-lustre-test.rules ] &&
udevadm control --reload-rules
udevadm trigger
+ check_mem_leak || return 254
+
+ return 0
+}
+
+unload_modules() {
+ local rc=0
+
+ wait_exit_ST client # bug 12845
+
+ unload_modules_local || rc=$?
+
if $LOAD_MODULES_REMOTE; then
local list=$(comma_list $(remote_nodes_list))
if [ -n "$list" ]; then
echo "unloading modules on: '$list'"
- do_rpc_nodes "$list" $LUSTRE_RMMOD ldiskfs
- do_rpc_nodes "$list" check_mem_leak
- do_rpc_nodes "$list" "rm -f /etc/udev/rules.d/99-lustre-test.rules"
- do_rpc_nodes "$list" "udevadm control --reload-rules"
- do_rpc_nodes "$list" "udevadm trigger"
+ do_rpc_nodes "$list" unload_modules_local
fi
fi
rm -f $sbin_mount
fi
- check_mem_leak || return 254
+ [[ $rc -eq 0 ]] && echo "modules unloaded."
- echo "modules unloaded."
- return 0
+ return $rc
}
fs_log_size() {
local size=0
case $(facet_fstype $facet) in
- ldiskfs) size=50;; # largest seen is 44, leave some headroom
+ ldiskfs) size=72;; # largest seen is 64, leave some headroom
# grant_block_size is in bytes, allow at least 2x max blocksize
zfs) size=$(lctl get_param osc.$FSNAME*.import |
awk '/grant_block_size:/ {print $2/512; exit;}')
echo -n $label
}
-mdsdevlabel() {
- local num=$1
- local device=$(mdsdevname $num)
- local label=$(devicelabel mds$num ${device} | grep -v "CMD: ")
- echo -n $label
-}
-
-ostdevlabel() {
- local num=$1
- local device=$(ostdevname $num)
- local label=$(devicelabel ost$num ${device} | grep -v "CMD: ")
- echo -n $label
-}
-
#
# Get the device of a facet.
#
local device=${2:-$FSNAME-OST*}
local name=$3
- do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
- osd-*.$device.$name 2>&1" | grep -v 'error:'
+ do_nodes $nodes "$LCTL get_param -n osd-*.$device.$name"
}
set_osd_param() {
local name=$3
local value=$4
- do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
- osd-*.$device.$name=$value 2>&1" | grep -v 'error:'
+ do_nodes $nodes "$LCTL set_param -n osd-*.$device.$name=$value"
}
set_debug_size () {
if [ "$old_MDT_QUOTA_TYPE" ]; then
if [[ $PERM_CMD == *"set_param -P"* ]]; then
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-MDT*.quota_slave.enable = \
+ osd-*.$FSNAME-MDT*.quota_slave.enabled = \
$old_MDT_QUOTA_TYPE
else
do_facet mgs $PERM_CMD \
if [ "$old_OST_QUOTA_TYPE" ]; then
if [[ $PERM_CMD == *"set_param -P"* ]]; then
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-OST*.quota_slave.enable = \
+ osd-*.$FSNAME-OST*.quota_slave.enabled = \
$old_OST_QUOTA_TYPE
else
do_facet mgs $LCTL conf_param \
# This will allow fixing the "lfs df" summary line in the future.
lfs_df() {
$LFS df $* | sed -e 's/filesystem /filesystem_/'
+ check_lfs_df_ret_val $?
}
# Get free inodes on the MDT specified by mdt index, free indoes on
if [[ $PERM_CMD == *"set_param -P"* ]]; then
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-MDT*.quota_slave.enable=$QUOTA_TYPE
+ osd-*.$FSNAME-MDT*.quota_slave.enabled=$QUOTA_TYPE
do_facet mgs $PERM_CMD \
- osd-*.$FSNAME-OST*.quota_slave.enable=$QUOTA_TYPE
+ osd-*.$FSNAME-OST*.quota_slave.enabled=$QUOTA_TYPE
else
do_facet mgs $PERM_CMD $FSNAME.quota.mdt=$QUOTA_TYPE ||
error "set mdt quota type failed"
reboot_facet() {
local facet=$1
local node=$(facet_active_host $facet)
+ local sleep_time=${2:-10}
if [ "$FAILURE_MODE" = HARD ]; then
boot_node $node
else
- sleep 10
+ sleep $sleep_time
fi
}
}
# End recovery-scale functions
-# verify that lustre actually cleaned up properly
-cleanup_check() {
- VAR=$(lctl get_param -n catastrophe 2>&1)
- if [ $? = 0 ] ; then
- if [ $VAR != 0 ]; then
- error "LBUG/LASSERT detected"
- fi
- fi
- BUSY=$(dmesg | grep -i destruct || true)
- if [ -n "$BUSY" ]; then
- echo "$BUSY" 1>&2
- [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.$(date +%s)
- exit 205
- fi
-
- check_mem_leak || exit 204
-
- [[ $($LCTL dl 2>/dev/null | wc -l) -gt 0 ]] && $LCTL dl &&
- echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
- return 202 || true
-
- if module_loaded lnet || module_loaded libcfs; then
- echo "$TESTSUITE: modules still loaded..." 1>&2
- /sbin/lsmod 1>&2
- return 203
- fi
- return 0
-}
-
##
# wait for a command to return the expected result
#
# If --verbose is passed as the first argument, the result is printed on each
# value change, otherwise it is only printed after every 10s interval.
#
+# If --quiet is passed as the first/second argument, the do_node() command
+# will not print the remote command before executing it each time.
+#
# Using wait_update_cond() or related helper function is preferable to adding
# a "long enough" wait for some state to change in the background, since
# "long enough" may be too short due to tunables, system config, or running in
# a VM, and must by necessity wait too long for most cases or risk failure.
#
-# usage: wait_update_cond [--verbose] node check cond expect [max_wait]
+# usage: wait_update_cond [--verbose] [--quiet] node check cond expect [max_wait]
wait_update_cond() {
- local verbose=false
- [[ "$1" == "--verbose" ]] && verbose=true && shift
+ local verbose
+ local quiet
+
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
local node=$1
local check="$2"
local print=10
while (( $waited <= $max_wait )); do
- result=$(do_node $node "$check")
+ result=$(do_node $quiet $node "$check")
eval [[ "'$result'" $cond "'$expect'" ]]
if [[ $? == 0 ]]; then
echo "Updated after ${waited}s: want '$expect' got '$result'"
return 0
fi
- if $verbose && [[ "$result" != "$prev_result" ]]; then
+ if [[ -n "$verbose" && "$result" != "$prev_result" ]]; then
[[ -n "$prev_result" ]] &&
echo "Changed after ${waited}s: from '$prev_result' to '$result'"
prev_result="$result"
return 3
}
-# usage: wait_update [--verbose] node check expect [max_wait]
+# usage: wait_update [--verbose] [--quiet] node check expect [max_wait]
wait_update() {
- local verbose=
- [ "$1" = "--verbose" ] && verbose="$1" && shift
+ local verbose
+ local quiet
+
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
local node="$1"
local check="$2"
local expect="$3"
local max_wait=$4
- wait_update_cond $verbose $node "$check" "==" "$expect" $max_wait
+ wait_update_cond $verbose $quiet $node "$check" "==" "$expect" $max_wait
}
# usage: wait_update_facet_cond [--verbose] facet check cond expect [max_wait]
wait_update_facet_cond() {
- local verbose=
- [ "$1" = "--verbose" ] && verbose="$1" && shift
+ local verbose
+ local quiet
+
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
local node=$(facet_active_host $1)
local check="$2"
local expect="$4"
local max_wait=$5
- wait_update_cond $verbose $node "$check" "$cond" "$expect" $max_wait
+ wait_update_cond $verbose $quiet $node "$check" "$cond" "$expect" $max_wait
}
# usage: wait_update_facet [--verbose] facet check expect [max_wait]
wait_update_facet() {
- local verbose=
- [ "$1" = "--verbose" ] && verbose="$1" && shift
+ local verbose
+ local quiet
+
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
local node=$(facet_active_host $1)
local check="$2"
local expect="$3"
local max_wait=$4
- wait_update_cond $verbose $node "$check" "==" "$expect" $max_wait
+ wait_update_cond $verbose $quiet $node "$check" "==" "$expect" $max_wait
}
sync_all_data() {
}
wait_destroy_complete () {
- echo "Waiting for local destroys to complete"
+ echo "Waiting for MDT destroys to complete"
# MAX value shouldn't be big as this mean server responsiveness
# never increase this just to make test pass but investigate
# why it takes so long time
- local MAX=5
+ local MAX=${1:-5}
local WAIT=0
+ local list=$(comma_list $(mdts_nodes))
while [ $WAIT -lt $MAX ]; do
- local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
+ local -a RPCs=($(do_nodes $list $LCTL get_param -n osp.*.destroys_in_flight))
local con=1
local i
echo "Waiting ${WAIT}s for local destroys to complete"
WAIT=$((WAIT + 1))
done
- echo "Local destroys weren't done in $MAX sec."
+ echo "MDT destroys weren't done in $MAX sec."
return 1
}
lfs_df_check() {
local clients=${1:-$CLIENTS}
+ local rc
if [ -z "$clients" ]; then
- $LFS df $MOUNT
+ $LFS df $MOUNT > /dev/null
+ rc=$?
else
$PDSH $clients "$LFS df $MOUNT" > /dev/null
+ rc=$?
fi
+
+ check_lfs_df_ret_val $rc
+ rc=$?
+
+ return $rc
}
clients_up() {
lfs_df_check
}
+all_mds_up() {
+ (( MDSCOUNT == 1 )) && return
+
+ # wait so that statfs data on MDT expire
+ local delay=$(do_facet $SINGLEMDS lctl \
+ get_param -n osp.*MDT0000*MDT0001.maxage)
+ sleep $delay
+ local nodes=$(comma_list $(mdts_nodes))
+ # initiate statfs RPC, all to all MDTs
+ do_nodes $nodes $LCTL get_param -N osp.*MDT*MDT*.filesfree >&/dev/null
+ do_nodes $nodes $LCTL get_param -N osp.*MDT*MDT*.filesfree >&/dev/null
+}
+
client_up() {
# usually checked on particular client or locally
sleep 1
facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
echo reboot facets: ${affecteds[index]}
- reboot_facet $facet
+ reboot_facet $facet $sleep_time
change_active ${affecteds[index]}
done
}
-obd_name() {
- local facet=$1
-}
-
replay_barrier() {
local facet=$1
do_facet $facet "sync; sync; sync"
mount_facet $facet -o $abort_type
clients_up || echo "first stat failed: $?"
clients_up || error "post-failover stat: $?"
+ all_mds_up
}
host_nids_address() {
}
do_node() {
- local verbose=false
- # do not stripe off hostname if verbose, bug 19215
- if [ x$1 = x--verbose ]; then
- shift
- verbose=true
- fi
+ local verbose
+ local quiet
- local HOST=$1
- shift
- local myPDSH=$PDSH
- if [ "$HOST" = "$HOSTNAME" ]; then
- myPDSH="no_dsh"
- elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
- echo "cannot run remote command on $HOST with $myPDSH"
- return 128
- fi
- if $VERBOSE; then
- echo "CMD: $HOST $@" >&2
- $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
- fi
+ # do not strip off hostname if verbose, b=19215
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
+
+ local HOST=$1
+ shift
+ local myPDSH=$PDSH
+
+ if [ "$HOST" = "$HOSTNAME" ]; then
+ myPDSH="no_dsh"
+ elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
+ echo "cannot run remote command on $HOST with $myPDSH"
+ return 128
+ fi
+ if $VERBOSE && [[ -z "$quiet" ]]; then
+ echo "CMD: $HOST $@" >&2
+ $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
+ fi
if [[ "$myPDSH" == "rsh" ]] ||
[[ "$myPDSH" == *pdsh* && "$myPDSH" != *-S* ]]; then
return 0
fi
- if $verbose ; then
+ if [[ -n "$verbose" ]]; then
# print HOSTNAME for myPDSH="no_dsh"
if [[ $myPDSH = no_dsh ]]; then
$myPDSH $HOST "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" sh -c \"$@\")" | sed -e "s/^/${HOSTNAME}: /"
return ${PIPESTATUS[0]}
}
-do_nodev() {
- do_node --verbose "$@"
-}
-
single_local_node () {
- [ "$1" = "$HOSTNAME" ]
+ [ "$1" = "$HOSTNAME" ]
}
# Outputs environment variable assignments that should be passed to remote nodes
}
do_nodes() {
- local verbose=false
- # do not stripe off hostname if verbose, bug 19215
- if [ x$1 = x--verbose ]; then
- shift
- verbose=true
- fi
+ local verbose
+ local quiet
- local rnodes=$1
- shift
+ # do not strip off hostname if verbose, b=19215
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
- if single_local_node $rnodes; then
- if $verbose; then
- do_nodev $rnodes "$@"
- else
- do_node $rnodes "$@"
- fi
- return $?
- fi
+ local rnodes=$1
+ shift
- # This is part from do_node
- local myPDSH=$PDSH
+ if single_local_node $rnodes; then
+ do_node $verbose $quiet $rnodes "$@"
+ return $?
+ fi
- [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
- echo "cannot run remote command on $rnodes with $myPDSH" && return 128
+ # This is part from do_node
+ local myPDSH=$PDSH
- export FANOUT=$(get_node_count "${rnodes//,/ }")
- if $VERBOSE; then
- echo "CMD: $rnodes $@" >&2
- $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
- fi
+ [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] &&
+ echo "cannot run remote command on $rnodes with $myPDSH" &&
+ return 128
- # do not replace anything from pdsh output if -N is used
- # -N Disable hostname: prefix on lines of output.
- if $verbose || [[ $myPDSH = *-N* ]]; then
- $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")"
- else
- $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")" | sed -re "s/^[^:]*: //g"
- fi
- return ${PIPESTATUS[0]}
+ export FANOUT=$(get_node_count "${rnodes//,/ }")
+ if $VERBOSE && [[ -z "$quiet" ]]; then
+ echo "CMD: $rnodes $@" >&2
+ $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
+ fi
+
+ # do not replace anything from pdsh output if -N is used
+ # -N Disable hostname: prefix on lines of output.
+ if [[ -n "$verbose" || $myPDSH = *-N* ]]; then
+ $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")"
+ else
+ $myPDSH $rnodes "(PATH=\$PATH:$RLUSTRE/utils:$RLUSTRE/tests:/sbin:/usr/sbin; cd $RPWD; LUSTRE=\"$RLUSTRE\" $(get_env_vars) sh -c \"$@\")" | sed -re "s/^[^:]*: //g"
+ fi
+ return ${PIPESTATUS[0]}
}
##
#
# usage: do_facet $facet command [arg ...]
do_facet() {
+ local verbose
+ local quiet
+
+ [[ "$1" == "--verbose" ]] && verbose="$1" && shift
+ [[ "$1" == "--quiet" || "$1" == "-q" ]] && quiet="$1" && shift
+
local facet=$1
shift
- local HOST=$(facet_active_host $facet)
- [ -z $HOST ] && echo "No host defined for facet ${facet}" && exit 1
- do_node $HOST "$@"
+ local host=$(facet_active_host $facet)
+
+ [ -z "$host" ] && echo "No host defined for facet ${facet}" && exit 1
+ do_node $verbose $quiet $host "$@"
}
# Function: do_facet_random_file $FACET $FILE $SIZE
}
do_nodesv() {
- do_nodes --verbose "$@"
+ do_nodes --verbose "$@"
}
add() {
TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
log "Using TIMEOUT=$TIMEOUT"
+ # tune down to speed up testing on (usually) small setups
+ local mgc_timeout=/sys/module/mgc/parameters/mgc_requeue_timeout_min
+ do_nodes $(comma_list $(nodes_list)) \
+ "[ -f $mgc_timeout ] && echo 1 > $mgc_timeout; exit 0"
+
osc_ensure_active $SINGLEMDS $TIMEOUT
osc_ensure_active client $TIMEOUT
$LCTL set_param osc.*.idle_timeout=debug
echo $mounted' ' | grep -w -q $mntpt' '
}
-is_empty_dir() {
- [ $(find $1 -maxdepth 1 -print | wc -l) = 1 ] && return 0
- return 1
+create_pools () {
+ local pool=$1
+ local ostsn=${2:-$OSTCOUNT}
+ local npools=${FS_NPOOLS:-$((OSTCOUNT / ostsn))}
+ local n
+
+ echo ostsn=$ostsn npools=$npools
+ if [[ $ostsn -gt $OSTCOUNT ]]; then
+ echo "request to use $ostsn OSTs in the pool, \
+ using max available OSTCOUNT=$OSTCOUNT"
+ ostsn=$OSTCOUNT
+ fi
+ for (( n=0; n < $npools; n++ )); do
+ p=${pool}$n
+ if ! $DELETE_OLD_POOLS; then
+ log "request to not delete old pools: $FSNAME.$p exist?"
+ if ! check_pool_not_exist $FSNAME.$p; then
+ echo "Using existing $FSNAME.$p"
+ $LCTL pool_list $FSNAME.$p
+ continue
+ fi
+ fi
+ create_pool $FSNAME.$p $KEEP_POOLS ||
+ error "create_pool $FSNAME.$p failed"
+
+ local first=$(( (n * ostsn) % OSTCOUNT ))
+ local last=$(( (first + ostsn - 1) % OSTCOUNT ))
+ if [[ $first -le $last ]]; then
+ pool_add_targets $p $first $last ||
+ error "pool_add_targets $p $first $last failed"
+ else
+ pool_add_targets $p $first $(( OSTCOUNT - 1 )) ||
+ error "pool_add_targets $p $first \
+ $(( OSTCOUNT - 1 )) failed"
+ pool_add_targets $p 0 $last ||
+ error "pool_add_targets $p 0 $last failed"
+ fi
+ done
}
-# empty lustre filesystem may have empty directories lost+found and .lustre
-is_empty_fs() {
- # exclude .lustre & lost+found
- [ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
- -print | wc -l) = 1 ] || return 1
- [ ! -d $1/lost+found ] || is_empty_dir $1/lost+found || return 1
- if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.4.0) ]; then
- # exclude .lustre/fid (LU-2780)
- [ $(find $1/.lustre -maxdepth 1 -name fid -prune -o \
- -print | wc -l) = 1 ] || return 1
- else
- [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre || return 1
- fi
- return 0
+set_pools_quota () {
+ local u
+ local o
+ local p
+ local i
+ local j
+
+ [[ $ENABLE_QUOTA ]] || error "Required Pool Quotas: \
+ $POOLS_QUOTA_USERS_SET, but ENABLE_QUOTA not set!"
+
+ # POOLS_QUOTA_USERS_SET=
+ # "quota15_1:20M -- for all of the found pools
+ # quota15_2:1G:gpool0
+ # quota15_3 -- for global limit only
+ # quota15_4:200M:gpool0
+ # quota15_4:200M:gpool1"
+
+ declare -a pq_userset=(${POOLS_QUOTA_USERS_SET="mpiuser"})
+ declare -a pq_users
+ declare -A pq_limits
+
+ for ((i=0; i<${#pq_userset[@]}; i++)); do
+ u=${pq_userset[i]%%:*}
+ o=""
+ # user gets no pool limits if
+ # POOLS_QUOTA_USERS_SET does not specify it
+ [[ ${pq_userset[i]} =~ : ]] && o=${pq_userset[i]##$u:}
+ pq_limits[$u]+=" $o"
+ done
+ pq_users=(${!pq_limits[@]})
+
+ declare -a opts
+ local pool
+
+ for ((i=0; i<${#pq_users[@]}; i++)); do
+ u=${pq_users[i]}
+ # set to max limit (_u64)
+ $LFS setquota -u $u -B $((2**24 - 1))T $DIR
+ opts=(${pq_limits[$u]})
+ for ((j=0; j<${#opts[@]}; j++)); do
+ p=${opts[j]##*:}
+ o=${opts[j]%%:*}
+ # Set limit for all existing pools if
+ # no pool specified
+ if [ $p == $o ]; then
+ p=$(list_pool $FSNAME | sed "s/$FSNAME.//")
+ echo "No pool specified for $u,
+ set limit $o for all existing pools"
+ fi
+ for pool in $p; do
+ $LFS setquota -u $u -B $o --pool $pool $DIR ||
+ error "setquota -u $u -B $o \
+ --pool $pool failed"
+ done
+ done
+ $LFS quota -uv $u --pool $DIR
+ done
}
check_and_setup_lustre() {
set_flavor_all $SEC
fi
+ if $DELETE_OLD_POOLS; then
+ destroy_all_pools
+ fi
+ if [[ -n "$FS_POOL" ]]; then
+ create_pools $FS_POOL $FS_POOL_NOSTS
+ fi
+
+ if [[ -n "$POOLS_QUOTA_USERS_SET" ]]; then
+ set_pools_quota
+ fi
if [ "$ONLY" == "setup" ]; then
exit 0
fi
check_and_setup_lustre
}
-# Get all of the server target devices from a given server node and type.
-get_mnt_devs() {
- local node=$1
- local type=$2
- local devs
- local dev
-
- if [ "$type" == ost ]; then
- devs=$(get_osd_param $node "" mntdev)
- else
- devs=$(do_node $node $LCTL get_param -n osd-*.$FSNAME-M*.mntdev)
- fi
- for dev in $devs; do
- case $dev in
- *loop*) do_node $node "losetup $dev" | \
- sed -e "s/.*(//" -e "s/).*//" ;;
- *) echo $dev ;;
- esac
- done
-}
-
-# Get all of the server target devices.
-get_svr_devs() {
- local node
- local i
-
- # Master MDS parameters used by lfsck
- MDTNODE=$(facet_active_host $SINGLEMDS)
- MDTDEV=$(echo $(get_mnt_devs $MDTNODE mdt) | awk '{print $1}')
-
- # MDT devices
- i=0
- for node in $(mdts_nodes); do
- MDTDEVS[i]=$(get_mnt_devs $node mdt)
- i=$((i + 1))
- done
-
- # OST devices
- i=0
- for node in $(osts_nodes); do
- OSTDEVS[i]=$(get_mnt_devs $node ost)
- i=$((i + 1))
- done
-}
-
# Run e2fsck on MDT or OST device.
run_e2fsck() {
local node=$1
# General functions
wait_for_function () {
- local quiet=""
-
- # suppress fn both stderr and stdout
- if [ "$1" = "--quiet" ]; then
- shift
- quiet=" > /dev/null 2>&1"
+ local quiet=""
- fi
+ # suppress fn both stderr and stdout
+ if [ "$1" = "--quiet" ]; then
+ shift
+ quiet=" > /dev/null 2>&1"
+ fi
- local fn=$1
- local max=${2:-900}
- local sleep=${3:-5}
+ local fn=$1
+ local max=${2:-900}
+ local sleep=${3:-5}
- local wait=0
+ local wait=0
- while true; do
+ while true; do
- eval $fn $quiet && return 0
+ eval $fn $quiet && return 0
- wait=$((wait + sleep))
- [ $wait -lt $max ] || return 1
- echo waiting $fn, $((max - wait)) secs left ...
- sleep $sleep
- done
+ [ $wait -lt $max ] || return 1
+ echo waiting $fn, $((max - wait)) secs left ...
+ wait=$((wait + sleep))
+ [ $wait -gt $max ] && ((sleep -= wait - max))
+ sleep $sleep
+ done
}
check_network() {
at_get $1 at_max
}
-at_min_get() {
- at_get $1 at_min
-}
-
at_max_set() {
local at_max=$1
shift
}
reset_fail_loc () {
- echo -n "Resetting fail_loc on all nodes..."
- do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 \
- fail_val=0 2>/dev/null" || true
- echo done.
+ #echo -n "Resetting fail_loc on all nodes..."
+ do_nodes --quiet $(comma_list $(nodes_list)) \
+ "lctl set_param -n fail_loc=0 fail_val=0 2>/dev/null" || true
+ #echo done.
}
# Also appends a timestamp and prepends the testsuite name.
#
-EQUALS="===================================================================================================="
+# ======================================================== 15:06:12 (1624050372)
+EQUALS="========================================================"
banner() {
msg="== ${TESTSUITE} $*"
last=${msg: -1:1}
ldiskfs_check_descriptors: Checksum for group 0 failed\|\
group descriptors corrupted"
- res=$(do_nodes $(comma_list $(nodes_list)) "dmesg" | grep "$errors")
+ res=$(do_nodes -q $(comma_list $(nodes_list)) "dmesg" | grep "$errors")
[ -z "$res" ] && return 0
echo "Kernel error detected: $res"
return 1
log_sub_test_end "SKIP" "0" "0" "$@"
}
-canonical_path() {
- (cd $(dirname $1); echo $PWD/$(basename $1))
-}
-
grant_from_clients() {
local nodes="$1"
# sync all the data and make sure no pending data on server
do_nodes $clients sync
- clients_up # initiate all idling connections
+ do_nodes $clients $LFS df # initiate all idling connections
# get client grant
cli_grant=$(grant_from_clients $clients)
}
ostname_from_index() {
- local uuid=$(ostuuid_from_index $1)
+ local uuid=$(ostuuid_from_index $1 $2)
echo ${uuid/_UUID/}
}
# Description:
# Returns list of ip addresses for each interface
local_addr_list() {
- ip addr | awk '/inet\ / {print $2}' | awk -F\/ '{print $1}'
+ ip addr | awk '/inet / {print $2}' | awk -F/ '{print $1}'
}
is_local_addr() {
echo -n $(facets_nodes $(get_facets OST))
}
-# Get all of the active AGT (HSM agent) nodes.
-agts_nodes () {
- echo -n $(facets_nodes $(get_facets AGT))
-}
-
# Get all of the client nodes and active server nodes.
nodes_list () {
local nodes=$HOSTNAME
echo $nodes | wc -w || true
}
-mixed_ost_devs () {
- local nodes=$(osts_nodes)
- local osscount=$(get_node_count "$nodes")
- [ ! "$OSTCOUNT" = "$osscount" ]
-}
-
mixed_mdt_devs () {
local nodes=$(mdts_nodes)
local mdtcount=$(get_node_count "$nodes")
rm -f $file
}
-setstripe_nfsserver () {
- local dir=$1
- local nfsexportdir=$2
- shift
- shift
-
- local -a nfsexport=($(awk '"'$dir'" ~ $2 && $3 ~ "nfs" && $2 != "/" \
- { print $1 }' /proc/mounts | cut -f 1 -d :))
-
- # check that only one nfs mounted
- [[ -z $nfsexport ]] && echo "$dir is not nfs mounted" && return 1
- (( ${#nfsexport[@]} == 1 )) ||
- error "several nfs mounts found for $dir: ${nfsexport[@]} !"
-
- do_nodev ${nfsexport[0]} lfs setstripe $nfsexportdir "$@"
-}
-
# Check and add a test group.
add_group() {
local group_id=$1
}
check_runas_id_ret() {
- local myRC=0
- local myRUNAS_UID=$1
- local myRUNAS_GID=$2
- shift 2
- local myRUNAS=$@
- if [ -z "$myRUNAS" ]; then
- error_exit "myRUNAS command must be specified for check_runas_id"
- fi
- if $GSS_KRB5; then
- $myRUNAS krb5_login.sh || \
- error "Failed to refresh Kerberos V5 TGT for UID $myRUNAS_ID."
- fi
- mkdir $DIR/d0_runas_test
- chmod 0755 $DIR
- chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
- $myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
- rm -rf $DIR/d0_runas_test
- return $myRC
+ local myRC=0
+ local myRUNAS_UID=$1
+ local myRUNAS_GID=$2
+ shift 2
+ local myRUNAS=$@
+
+ if [ -z "$myRUNAS" ]; then
+ error_exit "check_runas_id_ret requires myRUNAS argument"
+ fi
+
+ $myRUNAS true ||
+ error "Unable to execute $myRUNAS"
+
+ id $myRUNAS_UID > /dev/null ||
+ error "Invalid RUNAS_ID $myRUNAS_UID. Please set RUNAS_ID to " \
+ "some UID which exists on MDS and client or add user " \
+ "$myRUNAS_UID:$myRUNAS_GID on these nodes."
+
+ if $GSS_KRB5; then
+ $myRUNAS krb5_login.sh ||
+ error "Failed to refresh krb5 TGT for UID $myRUNAS_ID."
+ fi
+ mkdir $DIR/d0_runas_test
+ chmod 0755 $DIR
+ chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
+ $myRUNAS -u $myRUNAS_UID -g $myRUNAS_GID touch $DIR/d0_runas_test/f$$ ||
+ myRC=$?
+ rm -rf $DIR/d0_runas_test
+ return $myRC
}
check_runas_id() {
- local myRUNAS_UID=$1
- local myRUNAS_GID=$2
- shift 2
- local myRUNAS=$@
- check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
- error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
- Please set RUNAS_ID to some UID which exists on MDS and client or
- add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
+ local myRUNAS_UID=$1
+ local myRUNAS_GID=$2
+ shift 2
+ local myRUNAS=$@
+
+ check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
+ error "unable to write to $DIR/d0_runas_test as " \
+ "UID $myRUNAS_UID."
}
# obtain the UID/GID for MPI_USER
check_node_health() {
local nodes=${1:-$(comma_list $(nodes_list))}
-
- for node in ${nodes//,/ }; do
- check_network "$node" 5
- if [ $? -eq 0 ]; then
- do_node $node "$LCTL get_param catastrophe 2>&1" |
- grep -q "catastrophe=1" &&
- error "$node:LBUG/LASSERT detected" || true
- fi
- done
+ local health=$TMP/node_health.$$
+
+ do_nodes -q $nodes "$LCTL get_param catastrophe 2>&1" | tee $health |
+ grep "catastrophe=1" && error "LBUG/LASSERT detected"
+ # Only check/report network health if get_param isn't reported, since
+ # *clearly* the network is working if get_param returned something.
+ if (( $(grep -c catastro $health) != $(wc -w <<< ${nodes//,/ }) )); then
+ for node in ${nodes//,/}; do
+ check_network $node 5
+ done
+ fi
+ rm -f $health
}
mdsrate_cleanup () {
fi
}
-delayed_recovery_enabled () {
- local var=${SINGLEMDS}_svc
- do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
-}
-
########################
convert_facet2label() {
echo "${1}-osc-[-0-9a-f]*"
}
-# If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
-# used by MDT would not be changed.
-# mdt lov: fsname-mdtlov
-# mdt osc: fsname-OSTXXXX-osc
-mds_on_old_device() {
- local mds=${1:-"$SINGLEMDS"}
-
- if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
- do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
- > /dev/null 2>&1" && return 0
- fi
- return 1
-}
-
get_mdtosc_proc_path() {
local mds_facet=$1
local ost_label=${2:-"*OST*"}
}
_wait_import_state () {
- local expected=$1
- local CONN_PROC=$2
- local maxtime=${3:-$(max_recovery_time)}
- local error_on_failure=${4:-1}
- local CONN_STATE
- local i=0
+ local expected="$1"
+ local CONN_PROC="$2"
+ local maxtime=${3:-$(max_recovery_time)}
+ local err_on_fail=${4:-1}
+ local CONN_STATE
+ local i=0
CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2 | uniq)
- while ! echo "${CONN_STATE}" | egrep -q "^${expected}\$" ; do
- if [ "${expected}" == "DISCONN" ]; then
- # for disconn we can check after proc entry is removed
- [ "x${CONN_STATE}" == "x" ] && return 0
- # with AT enabled, we can have connect request timeout near of
- # reconnect timeout and test can't see real disconnect
- [ "${CONN_STATE}" == "CONNECTING" ] && return 0
- fi
- if [ $i -ge $maxtime ]; then
- [ $error_on_failure -ne 0 ] && \
- error "can't put import for $CONN_PROC into ${expected}" \
- "state after $i sec, have ${CONN_STATE}"
- return 1
- fi
- sleep 1
- # Add uniq for multi-mount case
- CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2 | uniq)
- i=$(($i + 1))
- done
+ while ! echo "${CONN_STATE}" | egrep -q "^${expected}\$" ; do
+ if [[ "${expected}" == "DISCONN" ]]; then
+ # for disconn we can check after proc entry is removed
+ [[ -z "${CONN_STATE}" ]] && return 0
+ # with AT, we can have connect request timeout near
+ # reconnect timeout and test can't see real disconnect
+ [[ "${CONN_STATE}" == "CONNECTING" ]] && return 0
+ fi
+ if (( $i >= $maxtime )); then
+ (( $err_on_fail != 0 )) &&
+ error "can't put import for $CONN_PROC into ${expected} state after $i sec, have ${CONN_STATE}"
+ return 1
+ fi
+ sleep 1
+ # Add uniq for multi-mount case
+ CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null |
+ cut -f2 | uniq)
+ i=$((i + 1))
+ done
- log "$CONN_PROC in ${CONN_STATE} state after $i sec"
- return 0
+ log "$CONN_PROC in ${CONN_STATE} state after $i sec"
+ return 0
}
wait_import_state() {
- local state=$1
- local params=$2
- local maxtime=${3:-$(max_recovery_time)}
- local error_on_failure=${4:-1}
- local param
-
- for param in ${params//,/ }; do
- _wait_import_state $state $param $maxtime $error_on_failure || return
- done
+ local expected="$1"
+ local params="$2"
+ local maxtime=${3:-$(max_recovery_time)}
+ local err_on_fail=${4:-1}
+ local param
+
+ for param in ${params//,/ }; do
+ _wait_import_state "$expected" "$param" $maxtime $err_on_fail ||
+ return
+ done
}
wait_import_state_mount() {
return 0
fi
- wait_import_state $*
+ wait_import_state "$@"
}
# One client request could be timed out because server was not ready
params=$param
fi
+ local plist=$(comma_list $params)
if ! do_rpc_nodes "$(facet_active_host $facet)" \
- wait_import_state $expected "$params" $maxtime; then
+ wait_import_state $expected $plist $maxtime; then
error "$facet: import is not in $expected state after $maxtime"
return 1
fi
params=$($LCTL list_param $param 2>/dev/null || true)
done
fi
+ local plist=$(comma_list $params)
if ! do_rpc_nodes "$(facet_active_host $facet)" \
- wait_import_state $expected "$params" $maxtime \
+ wait_import_state $expected $plist $maxtime \
$error_on_failure; then
if [ $error_on_failure -ne 0 ]; then
error "import is not in ${expected} state"
}
wait_clients_import_state () {
- local list=$1
- local facet=$2
- local expected=$3
-
- local facets=$facet
+ local list="$1"
+ local facet="$2"
+ local expected="$3"
+ local facets="$facet"
if [ "$FAILURE_MODE" = HARD ]; then
facets=$(facets_on_host $(facet_active_host $facet))
local proc_path
case $facet in
ost* ) proc_path="osc.$(get_clientosc_proc_path \
- $label).ost_server_uuid" ;;
+ $label).ost_server_uuid" ;;
mds* ) proc_path="mdc.$(get_clientmdc_proc_path \
- $label).mds_server_uuid" ;;
+ $label).mds_server_uuid" ;;
mgs* ) proc_path="mgc.$(get_clientmgc_proc_path \
- $label).mgs_server_uuid" ;;
+ $label).mgs_server_uuid" ;;
*) error "unknown facet!" ;;
esac
create_pool() {
local fsname=${1%%.*}
local poolname=${1##$fsname.}
+ local keep_pools=${2:-false}
stack_trap "destroy_test_pools $fsname" EXIT
do_facet mgs lctl pool_new $1
wait_update $HOSTNAME "lctl get_param -n lov.$fsname-*.pools.$poolname \
2>/dev/null || echo foo" "" || error "pool_new failed $1"
- add_pool_to_list $1
+ $keep_pools || add_pool_to_list $1
return $RC
}
local poolname=${1##$fsname.}
local listvar=${fsname}_CREATED_POOLS
- local temp=${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
+ local temp=${listvar}=$(exclude_items_from_list "${!listvar}" $poolname)
eval export $temp
}
+# cleanup all pools exist on $FSNAME
+destroy_all_pools () {
+ local i
+ for i in $(list_pool $FSNAME); do
+ destroy_pool $i
+ done
+}
+
destroy_pool_int() {
local ost
local OSTS=$(list_pool $1)
local RC
- check_pool_not_exist $fsname.$poolname
- [[ $? -eq 0 ]] && return 0
+ check_pool_not_exist $fsname.$poolname && return 0 || true
destroy_pool_int $fsname.$poolname
RC=$?
llverfs $partial_arg $llverfs_opts $dir
}
-#Remove objects from OST
-remove_ost_objects() {
- local facet=$1
- local ostdev=$2
- local group=$3
- shift 3
- local objids="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$OST_MOUNT_OPTS
- local i
- local rc
-
- echo "removing objects from $ostdev on $facet: $objids"
- if ! test -b $ostdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $ostdev $mntpt ||
- return $?
- rc=0
- for i in $objids; do
- rm $mntpt/O/$group/d$((i % 32))/$i || { rc=$?; break; }
- done
- umount -f $mntpt || return $?
- return $rc
-}
-
-#Remove files from MDT
-remove_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$MDS_MOUNT_OPTS
-
- echo "removing files from $mdtdev on $facet: $files"
- if [ $(facet_fstype $facet) == ldiskfs ] &&
- ! do_facet $facet test -b $mdtdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
- return $?
- rc=0
- for f in $files; do
- rm $mntpt/ROOT/$f || { rc=$?; break; }
- done
- umount -f $mntpt || return $?
- return $rc
-}
-
-duplicate_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$MDS_MOUNT_OPTS
-
- echo "duplicating files on $mdtdev on $facet: $files"
- mkdir -p $mntpt || return $?
- if [ $(facet_fstype $facet) == ldiskfs ] &&
- ! do_facet $facet test -b $mdtdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
- return $?
-
- do_umount() {
- trap 0
- popd > /dev/null
- rm $tmp
- umount -f $mntpt
- }
- trap do_umount EXIT
-
- tmp=$(mktemp $TMP/setfattr.XXXXXXXXXX)
- pushd $mntpt/ROOT > /dev/null || return $?
- rc=0
- for f in $files; do
- touch $f.bad || return $?
- getfattr -n trusted.lov $f | sed "s#$f#&.bad#" > $tmp
- rc=${PIPESTATUS[0]}
- [ $rc -eq 0 ] || return $rc
- setfattr --restore $tmp || return $?
- done
- do_umount
-}
-
run_sgpdd () {
local devs=${1//,/ }
shift
echo -n ${count:-0}
}
-# Get the block size of the filesystem.
-get_block_size() {
- local facet=$1
- local device=$2
- local size
-
- [ -z "$CLIENTONLY" ] && size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
- awk '/^Block size:/ {print $3}')
- echo -n ${size:-0}
-}
-
# Check whether the "ea_inode" feature is enabled or not, to allow
# ldiskfs xattrs over one block in size. Allow both the historical
# Lustre feature name (large_xattr) and the upstream name (ea_inode).
large_xattr_enabled() {
- [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 1
+ [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 0
local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
is_mounted $MOUNT || setupall
rm -rf $DIR/[df][0-9]* || error "Fail to cleanup the env!"
- mkdir $DIR/$tdir || error "Fail to mkdir $DIR/$tdir."
+ mkdir_on_mdt0 $DIR/$tdir || error "Fail to mkdir $DIR/$tdir."
for idx in $(seq $MDSCOUNT); do
local name="MDT$(printf '%04x' $((idx - 1)))"
rm -rf $MOUNT/.lustre/lost+found/$name/*
fi
local t=$(for i in $list; do printf "$FSNAME-OST%04x_UUID " $i; done)
+ local tg=$(for i in $list;
+ do printf -- "-e $FSNAME-OST%04x_UUID " $i; done)
+ local firstx=$(printf "%04x" $first)
+ local lastx=$(printf "%04x" $last)
+
do_facet mgs $LCTL pool_add \
- $FSNAME.$pool $FSNAME-OST[$first-$last/$step]
+ $FSNAME.$pool $FSNAME-OST[$firstx-$lastx/$step]
+ # ignore EEXIST(17)
+ if (( $? != 0 && $? != 17 )); then
+ error_noexit "pool_add $FSNAME-OST[$firstx-$lastx/$step] failed"
+ return 3
+ fi
# wait for OSTs to be added to the pool
for mds_id in $(seq $MDSCOUNT); do
local lodname=$FSNAME-MDT$(printf "%04x" $mdt_id)-mdtlov
wait_update_facet mds$mds_id \
"lctl get_param -n lod.$lodname.pools.$pool |
- sort -u | tr '\n' ' ' " "$t" || {
+ grep $tg | sort -u | tr '\n' ' '" "$t" || {
error_noexit "mds$mds_id: Add to pool failed"
- return 3
+ return 2
}
done
- wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$pool \
- | sort -u | tr '\n' ' ' " "$t" || {
+ wait_update $HOSTNAME "lctl get_param -n lov.$FSNAME-*.pools.$pool |
+ grep $tg | sort -u | tr '\n' ' ' " "$t" || {
error_noexit "Add to pool failed"
return 1
}
- local lfscount=$($LFS pool_list $FSNAME.$pool | grep -c "\-OST")
- local addcount=$(((last - first) / step + 1))
- [ $lfscount -eq $addcount ] || {
- error_noexit "lfs pool_list bad ost count" \
- "$lfscount != $addcount"
- return 2
- }
}
pool_set_dir() {
local rc=0
for osc in $oscs; do
- ((rc++))
echo "Check state for $osc"
local evicted=$(do_facet client $LCTL get_param osc.$osc.state |
- tail -n 3 | awk -F"[ [,]" \
- '/EVICTED ]$/ { if (mx<$5) {mx=$5;} } END { print mx }')
+ tail -n 5 | awk -F"[ ,]" \
+ '/EVICTED/ { if (mx<$4) { mx=$4; } } END { print mx }')
if (($? == 0)) && (($evicted > $before)); then
echo "$osc is evicted at $evicted"
- ((rc--))
+ else
+ ((rc++))
+ echo "$osc was not evicted after $before:"
+ do_facet client $LCTL get_param osc.$osc.state |
+ tail -n 8
fi
done
error "$mdt: changelog_mask=+hsm failed: $?"
local cl_user
- cl_user=$(do_facet $facet \
- $LCTL --device $mdt changelog_register -n) ||
+ cl_user=$(do_facet $facet $LCTL --device $mdt \
+ changelog_register -n $@) ||
error "$mdt: register changelog user failed: $?"
stack_trap "__changelog_deregister $facet $cl_user" EXIT
# so reorder to get same order than in changelog_register()
local cl_facets=$(echo "${!CL_USERS[@]}" | tr " " "\n" | sort |
tr "\n" " ")
+ local cl_user
for facet in $cl_facets; do
for cl_user in ${CL_USERS[$facet]}; do
export HSMTOOL_UPDATE_INTERVAL=${HSMTOOL_UPDATE_INTERVAL:=""}
export HSMTOOL_EVENT_FIFO=${HSMTOOL_EVENT_FIFO:=""}
export HSMTOOL_TESTDIR
+ export HSMTOOL_ARCHIVE_FORMAT=${HSMTOOL_ARCHIVE_FORMAT:-v2}
if ! [[ $HSMTOOL =~ hsmtool ]]; then
echo "HSMTOOL = '$HSMTOOL' does not contain 'hsmtool', GLWT" >&2
__lhsmtool_rebind()
{
- do_facet $facet $HSMTOOL -p "$hsm_root" --rebind "$@" "$mountpoint"
+ do_facet $facet $HSMTOOL "${hsmtool_options[@]}" --rebind "$@" "$mountpoint"
}
__lhsmtool_import()
{
mkdir -p "$(dirname "$2")" ||
error "cannot create directory '$(dirname "$2")'"
- do_facet $facet $HSMTOOL -p "$hsm_root" --import "$@" "$mountpoint"
+ do_facet $facet $HSMTOOL "${hsmtool_options[@]}" --import "$@" "$mountpoint"
}
__lhsmtool_setup()
{
local host="$(facet_host "$facet")"
- local cmd="$HSMTOOL $HSMTOOL_VERBOSE --daemon --pid-file=$HSMTOOL_PID_FILE --hsm-root \"$hsm_root\""
+ local cmd="$HSMTOOL ${hsmtool_options[@]} --daemon --pid-file=$HSMTOOL_PID_FILE"
[ -n "$bandwidth" ] && cmd+=" --bandwidth $bandwidth"
[ -n "$archive_id" ] && cmd+=" --archive $archive_id"
- [ ${#misc_options[@]} -gt 0 ] &&
- cmd+=" $(IFS=" " echo "$@")"
- cmd+=" \"$mountpoint\""
+# [ ${#misc_options[@]} -gt 0 ] &&
+# cmd+=" $(IFS=" " echo "$@")"
+ cmd+=" $@ \"$mountpoint\""
- echo "Starting copytool '$facet' on '$host'"
+ echo "Starting copytool '$facet' on '$host' with cmdline '$cmd'"
stack_trap "pkill_copytools $host TERM || true" EXIT
do_node "$host" "$cmd < /dev/null > \"$(copytool_logfile $facet)\" 2>&1"
}
# Parse arguments
local fail_on_error=true
- local -a misc_options
+ local -a hsmtool_options=("--hsm-root=$hsm_root")
+ local -a action_options=()
+
+ if [[ -n "$HSMTOOL_ARCHIVE_FORMAT" ]]; then
+ hsmtool_options+=("--archive-format=$HSMTOOL_ARCHIVE_FORMAT")
+ fi
+
+ if [[ -n "$HSMTOOL_VERBOSE" ]]; then
+ hsmtool_options+=("$HSMTOOL_VERBOSE")
+ fi
+
while [ $# -gt 0 ]; do
case "$1" in
-f|--facet)
;;
*)
# Uncommon(/copytool dependent) option
- misc_options+=("$1")
+ action_options+=("$1")
;;
esac
shift
;;
esac
- __${copytool}_${action} "${misc_options[@]}"
+ __${copytool}_${action} "${action_options[@]}"
if [ $? -ne 0 ]; then
local error_msg
error_msg="Failed to start copytool $facet on '$host'"
;;
import)
- local src="${misc_options[0]}"
- local dest="${misc_options[1]}"
+ local src="${action_options[0]}"
+ local dest="${action_options[1]}"
error_msg="Failed to import '$src' to '$dest'"
;;
rebind)
local saved_debug=$($LCTL get_param -n debug)
local list=$(comma_list $(all_nodes))
- do_nodes $list $LCTL set_param debug=0
+ do_nodes $list $LCTL set_param -n debug=0
}
$LUSTRE/tests/createmany $*
local rc=$?
(( count > 100 )) &&
- do_nodes $list "$LCTL set_param debug=\\\"$saved_debug\\\""
+ do_nodes $list "$LCTL set_param -n debug=\\\"$saved_debug\\\""
return $rc
}
local saved_debug=$($LCTL get_param -n debug)
local list=$(comma_list $(all_nodes))
- do_nodes $list $LCTL set_param debug=0
+ do_nodes $list $LCTL set_param -n debug=0
}
$LUSTRE/tests/unlinkmany $*
local rc=$?
(( count > 100 )) &&
- do_nodes $list "$LCTL set_param debug=\\\"$saved_debug\\\""
+ do_nodes $list "$LCTL set_param -n debug=\\\"$saved_debug\\\""
return $rc
}
check_set_fallocate || skip "need at least 2.13.57 for fallocate"
}
+function disable_opencache()
+{
+ local state=$($LCTL get_param -n "llite.*.opencache_threshold_count" | head -1)
+
+ test -z "${saved_OPENCACHE_value}" &&
+ export saved_OPENCACHE_value="$state"
+
+ [[ "$state" = "off" ]] && return
+
+ $LCTL set_param -n "llite.*.opencache_threshold_count"=off
+}
+
+function set_opencache()
+{
+ local newvalue="$1"
+ local state=$($LCTL get_param -n "llite.*.opencache_threshold_count")
+
+ [[ -n "$newvalue" ]] || return
+
+ [[ -n "${saved_OPENCACHE_value}" ]] ||
+ export saved_OPENCACHE_value="$state"
+
+ $LCTL set_param -n "llite.*.opencache_threshold_count"=$newvalue
+}
+
+
+
+function restore_opencache()
+{
+ [[ -z "${saved_OPENCACHE_value}" ]] ||
+ $LCTL set_param -n "llite.*.opencache_threshold_count"=${saved_OPENCACHE_value}
+}
+
+# LU-13417: XXX lots of tests assume the directory to be created under MDT0,
+# created on MDT0, use this function to create directory on specific MDT
+# explicitly, and set default LMV to create subdirs on the same MDT too.
+mkdir_on_mdt() {
+ local mdt
+ local OPTIND=1
+
+ while getopts "i:" opt $*; do
+ case $opt in
+ i) mdt=$OPTARG;;
+ esac
+ done
+
+ shift $((OPTIND - 1))
+
+ $LFS mkdir -i $mdt -c 1 $*
+ # setting default LMV in non-DNE system will cause sanity-quota 41 fail
+ ((MDSCOUNT < 2)) || $LFS setdirstripe -D -i $mdt -c 1 $*
+}
+
+mkdir_on_mdt0() {
+ mkdir_on_mdt -i0 $*
+}
+
+# Wait for nodemap synchronization
+wait_nm_sync() {
+ local nodemap_name=$1
+ local key=$2
+ local value=$3
+ local opt=$4
+ local proc_param
+ local is_active=$(do_facet mgs $LCTL get_param -n nodemap.active)
+ local max_retries=20
+ local is_sync
+ local out1=""
+ local out2
+ local mgs_ip=$(host_nids_address $mgs_HOST $NETTYPE | cut -d' ' -f1)
+ local i
+
+ if [ "$nodemap_name" == "active" ]; then
+ proc_param="active"
+ elif [ -z "$key" ]; then
+ proc_param=${nodemap_name}
+ else
+ proc_param="${nodemap_name}.${key}"
+ fi
+ if [ "$opt" == "inactive" ]; then
+ # check nm sync even if nodemap is not activated
+ is_active=1
+ opt=""
+ fi
+ (( is_active == 0 )) && [ "$proc_param" != "active" ] && return
+
+ if [ -z "$value" ]; then
+ out1=$(do_facet mgs $LCTL get_param $opt \
+ nodemap.${proc_param} 2>/dev/null)
+ echo "On MGS ${mgs_ip}, ${proc_param} = $out1"
+ else
+ out1=$value;
+ fi
+
+ # if servers run on the same node, it is impossible to tell if they get
+ # synced with the mgs, so just wait an arbitrary 10 seconds
+ if [ $(facet_active_host mgs) == $(facet_active_host mds) ] &&
+ [ $(facet_active_host mgs) == $(facet_active_host ost1) ]; then
+ echo "waiting 10 secs for sync"
+ sleep 10
+ return
+ fi
+
+ # wait up to 10 seconds for other servers to sync with mgs
+ for i in $(seq 1 10); do
+ for node in $(all_server_nodes); do
+ local node_ip=$(host_nids_address $node $NETTYPE |
+ cut -d' ' -f1)
+
+ is_sync=true
+ if [ -z "$value" ]; then
+ [ $node_ip == $mgs_ip ] && continue
+ fi
+
+ out2=$(do_node $node_ip $LCTL get_param $opt \
+ nodemap.$proc_param 2>/dev/null)
+ echo "On $node ${node_ip}, ${proc_param} = $out2"
+ [ "$out1" != "$out2" ] && is_sync=false && break
+ done
+ $is_sync && break
+ sleep 1
+ done
+ if ! $is_sync; then
+ echo MGS
+ echo $out1
+ echo OTHER - IP: $node_ip
+ echo $out2
+ error "mgs and $nodemap_name ${key} mismatch, $i attempts"
+ fi
+ echo "waited $((i - 1)) seconds for sync"
+}
+
+consume_precreations() {
+ local dir=$1
+ local mfacet=$2
+ local OSTIDX=$3
+ local extra=${4:-2}
+ local OST=$(ostname_from_index $OSTIDX $dir)
+
+ test_mkdir -p $dir/${OST}
+ $LFS setstripe -i $OSTIDX -c 1 ${dir}/${OST}
+
+ # on the mdt's osc
+ local mdtosc_proc=$(get_mdtosc_proc_path $mfacet $OST)
+ local last_id=$(do_facet $mfacet $LCTL get_param -n \
+ osp.$mdtosc_proc.prealloc_last_id)
+ local next_id=$(do_facet $mfacet $LCTL get_param -n \
+ osp.$mdtosc_proc.prealloc_next_id)
+ echo "Creating to objid $last_id on ost $OST..."
+ createmany -o $dir/${OST}/f $next_id $((last_id - next_id + extra))
+}
+
+__exhaust_precreations() {
+ local OSTIDX=$1
+ local FAILLOC=$2
+ local FAILIDX=${3:-$OSTIDX}
+ local ofacet=ost$((OSTIDX + 1))
+
+ mkdir_on_mdt0 $DIR/$tdir
+ local mdtidx=$($LFS getstripe -m $DIR/$tdir)
+ local mfacet=mds$((mdtidx + 1))
+ echo OSTIDX=$OSTIDX MDTIDX=$mdtidx
+
+ local mdtosc_proc=$(get_mdtosc_proc_path $mfacet)
+ do_facet $mfacet $LCTL get_param osp.$mdtosc_proc.prealloc*
+
+#define OBD_FAIL_OST_ENOSPC 0x215
+ do_facet $ofacet $LCTL set_param fail_val=$FAILIDX fail_loc=0x215
+
+ consume_precreations $DIR/$tdir $mfacet $OSTIDX
+
+ do_facet $mfacet $LCTL get_param osp.$mdtosc_proc.prealloc*
+ do_facet $ofacet $LCTL set_param fail_loc=$FAILLOC
+}
+
+exhaust_precreations() {
+ __exhaust_precreations $1 $2 $3
+ sleep_maxage
+}
+
+exhaust_all_precreations() {
+ local i
+ for (( i=0; i < OSTCOUNT; i++ )) ; do
+ __exhaust_precreations $i $1 -1
+ done
+ sleep_maxage
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff