echo -n $label
}
-mdsdevlabel() {
- local num=$1
- local device=$(mdsdevname $num)
- local label=$(devicelabel mds$num ${device} | grep -v "CMD: ")
- echo -n $label
-}
-
-ostdevlabel() {
- local num=$1
- local device=$(ostdevname $num)
- local label=$(devicelabel ost$num ${device} | grep -v "CMD: ")
- echo -n $label
-}
-
#
# Get the device of a facet.
#
}
# End recovery-scale functions
-# verify that lustre actually cleaned up properly
-cleanup_check() {
- VAR=$(lctl get_param -n catastrophe 2>&1)
- if [ $? = 0 ] ; then
- if [ $VAR != 0 ]; then
- error "LBUG/LASSERT detected"
- fi
- fi
- BUSY=$(dmesg | grep -i destruct || true)
- if [ -n "$BUSY" ]; then
- echo "$BUSY" 1>&2
- [ -e $TMP/debug ] && mv $TMP/debug $TMP/debug-busy.$(date +%s)
- exit 205
- fi
-
- check_mem_leak || exit 204
-
- [[ $($LCTL dl 2>/dev/null | wc -l) -gt 0 ]] && $LCTL dl &&
- echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
- return 202 || true
-
- if module_loaded lnet || module_loaded libcfs; then
- echo "$TESTSUITE: modules still loaded..." 1>&2
- /sbin/lsmod 1>&2
- return 203
- fi
- return 0
-}
-
##
# wait for a command to return the expected result
#
done
}
-obd_name() {
- local facet=$1
-}
-
replay_barrier() {
local facet=$1
do_facet $facet "sync; sync; sync"
echo $mounted' ' | grep -w -q $mntpt' '
}
-is_empty_dir() {
- [ $(find $1 -maxdepth 1 -print | wc -l) = 1 ] && return 0
- return 1
-}
-
-# empty lustre filesystem may have empty directories lost+found and .lustre
-is_empty_fs() {
- # exclude .lustre & lost+found
- [ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
- -print | wc -l) = 1 ] || return 1
- [ ! -d $1/lost+found ] || is_empty_dir $1/lost+found || return 1
- if [ $(lustre_version_code $SINGLEMDS) -gt $(version_code 2.4.0) ]; then
- # exclude .lustre/fid (LU-2780)
- [ $(find $1/.lustre -maxdepth 1 -name fid -prune -o \
- -print | wc -l) = 1 ] || return 1
- else
- [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre || return 1
- fi
- return 0
-}
-
check_and_setup_lustre() {
sanitize_parameters
nfs_client_mode && return
check_and_setup_lustre
}
-# Get all of the server target devices from a given server node and type.
-get_mnt_devs() {
- local node=$1
- local type=$2
- local devs
- local dev
-
- if [ "$type" == ost ]; then
- devs=$(get_osd_param $node "" mntdev)
- else
- devs=$(do_node $node $LCTL get_param -n osd-*.$FSNAME-M*.mntdev)
- fi
- for dev in $devs; do
- case $dev in
- *loop*) do_node $node "losetup $dev" | \
- sed -e "s/.*(//" -e "s/).*//" ;;
- *) echo $dev ;;
- esac
- done
-}
-
-# Get all of the server target devices.
-get_svr_devs() {
- local node
- local i
-
- # Master MDS parameters used by lfsck
- MDTNODE=$(facet_active_host $SINGLEMDS)
- MDTDEV=$(echo $(get_mnt_devs $MDTNODE mdt) | awk '{print $1}')
-
- # MDT devices
- i=0
- for node in $(mdts_nodes); do
- MDTDEVS[i]=$(get_mnt_devs $node mdt)
- i=$((i + 1))
- done
-
- # OST devices
- i=0
- for node in $(osts_nodes); do
- OSTDEVS[i]=$(get_mnt_devs $node ost)
- i=$((i + 1))
- done
-}
-
# Run e2fsck on MDT or OST device.
run_e2fsck() {
local node=$1
at_get $1 at_max
}
-at_min_get() {
- at_get $1 at_min
-}
-
at_max_set() {
local at_max=$1
shift
log_sub_test_end "SKIP" "0" "0" "$@"
}
-canonical_path() {
- (cd $(dirname $1); echo $PWD/$(basename $1))
-}
-
grant_from_clients() {
local nodes="$1"
echo -n $(facets_nodes $(get_facets OST))
}
-# Get all of the active AGT (HSM agent) nodes.
-agts_nodes () {
- echo -n $(facets_nodes $(get_facets AGT))
-}
-
# Get all of the client nodes and active server nodes.
nodes_list () {
local nodes=$HOSTNAME
echo $nodes | wc -w || true
}
-mixed_ost_devs () {
- local nodes=$(osts_nodes)
- local osscount=$(get_node_count "$nodes")
- [ ! "$OSTCOUNT" = "$osscount" ]
-}
-
mixed_mdt_devs () {
local nodes=$(mdts_nodes)
local mdtcount=$(get_node_count "$nodes")
rm -f $file
}
-setstripe_nfsserver () {
- local dir=$1
- local nfsexportdir=$2
- shift
- shift
-
- local -a nfsexport=($(awk '"'$dir'" ~ $2 && $3 ~ "nfs" && $2 != "/" \
- { print $1 }' /proc/mounts | cut -f 1 -d :))
-
- # check that only one nfs mounted
- [[ -z $nfsexport ]] && echo "$dir is not nfs mounted" && return 1
- (( ${#nfsexport[@]} == 1 )) ||
- error "several nfs mounts found for $dir: ${nfsexport[@]} !"
-
- do_nodev ${nfsexport[0]} lfs setstripe $nfsexportdir "$@"
-}
-
# Check and add a test group.
add_group() {
local group_id=$1
fi
}
-delayed_recovery_enabled () {
- local var=${SINGLEMDS}_svc
- do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
-}
-
########################
convert_facet2label() {
echo "${1}-osc-[-0-9a-f]*"
}
-# If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
-# used by MDT would not be changed.
-# mdt lov: fsname-mdtlov
-# mdt osc: fsname-OSTXXXX-osc
-mds_on_old_device() {
- local mds=${1:-"$SINGLEMDS"}
-
- if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
- do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
- > /dev/null 2>&1" && return 0
- fi
- return 1
-}
-
get_mdtosc_proc_path() {
local mds_facet=$1
local ost_label=${2:-"*OST*"}
llverfs $partial_arg $llverfs_opts $dir
}
-#Remove objects from OST
-remove_ost_objects() {
- local facet=$1
- local ostdev=$2
- local group=$3
- shift 3
- local objids="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$OST_MOUNT_OPTS
- local i
- local rc
-
- echo "removing objects from $ostdev on $facet: $objids"
- if ! test -b $ostdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $ostdev $mntpt ||
- return $?
- rc=0
- for i in $objids; do
- rm $mntpt/O/$group/d$((i % 32))/$i || { rc=$?; break; }
- done
- umount -f $mntpt || return $?
- return $rc
-}
-
-#Remove files from MDT
-remove_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$MDS_MOUNT_OPTS
-
- echo "removing files from $mdtdev on $facet: $files"
- if [ $(facet_fstype $facet) == ldiskfs ] &&
- ! do_facet $facet test -b $mdtdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
- return $?
- rc=0
- for f in $files; do
- rm $mntpt/ROOT/$f || { rc=$?; break; }
- done
- umount -f $mntpt || return $?
- return $rc
-}
-
-duplicate_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=$(facet_mntpt $facet)
- local opts=$MDS_MOUNT_OPTS
-
- echo "duplicating files on $mdtdev on $facet: $files"
- mkdir -p $mntpt || return $?
- if [ $(facet_fstype $facet) == ldiskfs ] &&
- ! do_facet $facet test -b $mdtdev; then
- opts=$(csa_add "$opts" -o loop)
- fi
- mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
- return $?
-
- do_umount() {
- trap 0
- popd > /dev/null
- rm $tmp
- umount -f $mntpt
- }
- trap do_umount EXIT
-
- tmp=$(mktemp $TMP/setfattr.XXXXXXXXXX)
- pushd $mntpt/ROOT > /dev/null || return $?
- rc=0
- for f in $files; do
- touch $f.bad || return $?
- getfattr -n trusted.lov $f | sed "s#$f#&.bad#" > $tmp
- rc=${PIPESTATUS[0]}
- [ $rc -eq 0 ] || return $rc
- setfattr --restore $tmp || return $?
- done
- do_umount
-}
-
run_sgpdd () {
local devs=${1//,/ }
shift
echo -n ${count:-0}
}
-# Get the block size of the filesystem.
-get_block_size() {
- local facet=$1
- local device=$2
- local size
-
- [ -z "$CLIENTONLY" ] && size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
- awk '/^Block size:/ {print $3}')
- echo -n ${size:-0}
-}
-
# Check whether the "ea_inode" feature is enabled or not, to allow
# ldiskfs xattrs over one block in size. Allow both the historical
# Lustre feature name (large_xattr) and the upstream name (ea_inode).
git://git.whamcloud.com / fs / lustre-release.git / blobdiff