export GSS_KRB5=false
export GSS_PIPEFS=false
export IDENTITY_UPCALL=default
+
#export PDSH="pdsh -S -Rssh -w"
# eg, assert_env LUSTRE MDSNODES OSTNODES CLIENTS
assert_DIR () {
local failed=""
- [ -z "`echo :$DIR: | grep :$MOUNT:`" ] && \
- failed=1 && echo "DIR not in $MOUNT. Aborting."
- [ -z "`echo :$DIR1: | grep :$MOUNT1:`" ] && \
- failed=1 && echo "DIR1 not in $MOUNT1. Aborting."
- [ -z "`echo :$DIR2: | grep :$MOUNT2:`" ] && \
- failed=1 && echo "DIR2 not in $MOUNT2. Aborting"
+ [[ $DIR/ = $MOUNT/* ]] || \
+ { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
+ [[ $DIR1/ = $MOUNT1/* ]] || \
+ { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
+ [[ $DIR2/ = $MOUNT2/* ]] || \
+ { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
[ -n "$failed" ] && exit 99 || true
}
export PATH=$PATH:$LUSTRE/tests
fi
export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mdsrate"}
- [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate)
+ [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
+ if ! echo $PATH | grep -q $LUSTRE/test/racer; then
+ export PATH=$PATH:$LUSTRE/tests/racer
+ fi
export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
[ ! -f "$LCTL" ] && export LCTL=$(which lctl)
export LFS=${LFS:-"$LUSTRE/utils/lfs"}
}
+case `uname -r` in
+2.4.*) EXT=".o"; USE_QUOTA=no; [ ! "$CLIENTONLY" ] && FSTYPE=ext3;;
+ *) EXT=".ko"; USE_QUOTA=yes;;
+esac
+
load_module() {
EXT=".ko"
module=$1
load_module ../libcfs/libcfs/libcfs
[ "$PTLDEBUG" ] && lctl set_param debug=$PTLDEBUG
[ "$SUBSYSTEM" ] && lctl set_param subsystem_debug=${SUBSYSTEM# }
+ local MODPROBECONF=
[ -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
- [ -f /etc/modprobe.d/Lustre ] && MODPROBECONF=/etc/modprobe.d/Lustre
- [ -z "$LNETOPTS" -a -n "$MODPROBECONF" ] && \
+ [ ! "$MODPROBECONF" -a -d /etc/modprobe.d ] && MODPROBECONF=/etc/modprobe.d/Lustre
+ [ -z "$LNETOPTS" -a "$MODPROBECONF" ] && \
LNETOPTS=$(awk '/^options lnet/ { print $0}' $MODPROBECONF | sed 's/^options lnet //g')
echo $LNETOPTS | grep -q "accept=all" || LNETOPTS="$LNETOPTS accept=all";
echo "lnet options: '$LNETOPTS'"
load_module obdclass/obdclass
load_module ptlrpc/ptlrpc
load_module ptlrpc/gss/ptlrpc_gss
- # Now, some modules depend on lquota without USE_QUOTA check,
- # will fix later. Disable check "$USE_QUOTA" = "yes" temporary.
- #[ "$USE_QUOTA" = "yes" ] && load_module quota/lquota
- load_module quota/lquota
+ [ "$USE_QUOTA" = "yes" -a "$LQUOTA" != "no" ] && load_module quota/lquota
load_module fid/fid
load_module fld/fld
load_module lmv/lmv
load_module llite/lustre
load_module llite/llite_lloop
- rm -f $TMP/ogdb-$HOSTNAME
- OGDB=$TMP
+ OGDB=${OGDB:-$TMP}
+ rm -f $OGDB/ogdb-$HOSTNAME
[ -d /r ] && OGDB="/r/tmp"
$LCTL modules > $OGDB/ogdb-$HOSTNAME
echo "$LEAK_LUSTRE" 1>&2
echo "$LEAK_PORTALS" 1>&2
mv $TMP/debug $TMP/debug-leak.`date +%s` || true
- log "Memory leaks detected"
+ echo "Memory leaks detected"
[ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
return 1
fi
fi
}
+boot_node() {
+ local node=$1
+ if [ "$FAILURE_MODE" = HARD ]; then
+ $POWER_UP $node
+ fi
+}
+
# verify that lustre actually cleaned up properly
cleanup_check() {
[ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
[ "$PDSH" = "no_dsh" ] && return 0
while [ $WAIT -lt $2 ]; do
- running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep)
- [ -z "${running}" ] && return 0
+ running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
+ [ -z "${running}" ] && return 0 || true
echo "waited $WAIT for: "
echo "$running"
[ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
facet_failover() {
facet=$1
+ sleep_time=$2
echo "Failing $facet on node `facet_active_host $facet`"
shutdown_facet $facet
+ [ -n "$sleep_time" ] && sleep $sleep_time
reboot_facet $facet
client_df &
DFPID=$!
$LCTL mark "local REPLAY BARRIER on ${!svc}"
}
+replay_barrier_nosync() {
+ local facet=$1 echo running=${running}
+ local svc=${facet}_svc
+ echo Replay barrier on ${!svc}
+ do_facet $facet $LCTL --device %${!svc} readonly
+ do_facet $facet $LCTL --device %${!svc} notransno
+ do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "local REPLAY BARRIER on ${!svc}"
+}
+
mds_evict_client() {
UUID=`lctl get_param -n mdc.${mds1_svc}-mdc-*.uuid`
do_facet mds1 "lctl set_param -n mdt.${mds1_svc}.evict_client $UUID"
}
formatall() {
+ if [ "$IAMDIR" == "yes" ]; then
+ MDS_MKFS_OPTS="$MDS_MKFS_OPTS --iam-dir"
+ MDSn_MKFS_OPTS="$MDSn_MKFS_OPTS --iam-dir"
+ fi
+
[ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
if [ ! -z $SEC ]; then
local num=$1
local switch=$2
local j=`expr $num - 1`
- local MDT="`do_facet mds$num lctl get_param -N mdt.*MDT*$j | cut -d"." -f2 2>/dev/null || true`"
+ local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
if [ -z "$MDT" ]; then
return 2
done
fi
+ # wait a while to allow sptlrpc configuration be propogated to targets,
+ # only needed when mounting new target devices.
+ $GSS && sleep 10
+
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
mount_client $MOUNT
[ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
done
}
+check_config () {
+ local mntpt=$1
+
+ echo Checking config lustre mounted on $mntpt
+ local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
+ mgshost=$(echo $mgshost | awk -F: '{print $1}')
+ if [ "$mgshost" != "$mgs_HOST" ]; then
+ FAIL_ON_ERROR=true \
+ error "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST
+ Please use correct config or set mds_HOST correctly!"
+ fi
+}
+
check_and_setup_lustre() {
- MOUNTED="`mounted_lustre_filesystems`"
- if [ -z "$MOUNTED" ]; then
+ local MOUNTED=$(mounted_lustre_filesystems)
+ if [ -z "$MOUNTED" ] || ! $(echo $MOUNTED | grep -w -q $MOUNT); then
[ "$REFORMAT" ] && formatall
setupall
- MOUNTED="`mounted_lustre_filesystems`"
+ MOUNTED=$(mounted_lustre_filesystems | head -1)
[ -z "$MOUNTED" ] && error "NAME=$NAME not mounted"
export I_MOUNTED=yes
else
+ check_config $MOUNT
init_facets_vars
fi
if [ "$ONLY" == "setup" ]; then
IFS=abcdefghijklmnopqrstuvwxyz _basetest $1
}
+# print a newline if the last test was skipped
+export LAST_SKIPPED=
run_test() {
assert_DIR
if [ ! -z "$ONLY" ]; then
testname=ONLY_$1
if [ ${!testname}x != x ]; then
+ [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
run_one $1 "$2"
return $?
fi
testname=ONLY_$base
if [ ${!testname}x != x ]; then
+ [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
run_one $1 "$2"
return $?
fi
+ LAST_SKIPPED="y"
echo -n "."
return 0
fi
testname=EXCEPT_$1
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1"
return 0
fi
testname=EXCEPT_$base
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_SLOW_$1
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1"
return 0
fi
testname=EXCEPT_SLOW_$base
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
return 0
fi
+ LAST_SKIPPED=
run_one $1 "$2"
return $?
[ ! "$OSTCOUNT" = "$osscount" ]
}
+mixed_mdt_devs () {
+ local nodes=$(mdts_nodes)
+ local mdtcount=$(get_node_count "$nodes")
+ [ ! "$MDSCOUNT" = "$mdtcount" ]
+}
+
generate_machine_file() {
local nodes=${1//,/ }
local machinefile=$2
echo $res
}
+# reset osc stat counters
+clear_osc_stats(){
+ lctl set_param -n osc.*.osc_stats 0
+}
+
+# sum osc stat items
+calc_osc_stats() {
+ local res=$(lctl get_param -n osc.*.osc_stats |
+ awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
+ echo $res
+}
+
calc_sum () {
awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
}
fi
}
+# $1 node
+# $2 file
+get_stripe_info() {
+ local tmp_file
+
+ stripe_size=0
+ stripe_count=0
+ stripe_index=0
+ tmp_file=$(mktemp)
+
+ do_facet $1 lfs getstripe -v $2 > $tmp_file
+
+ stripe_size=`awk '$1 ~ /size/ {print $2}' $tmp_file`
+ stripe_count=`awk '$1 ~ /count/ {print $2}' $tmp_file`
+ stripe_index=`awk '/obdidx/ {start = 1; getline; print $1; exit}' $tmp_file`
+ rm -f $tmp_file
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff