export GSS_KRB5=false
export GSS_PIPEFS=false
export IDENTITY_UPCALL=default
+
#export PDSH="pdsh -S -Rssh -w"
-# eg, assert_env LUSTRE MDSNODES OSTNODES CLIENTS
-assert_env() {
- local failed=""
- for name in $@; do
- if [ -z "${!name}" ]; then
- echo "$0: $name must be set"
- failed=1
- fi
- done
- [ $failed ] && exit 1 || true
-}
+# function used by scripts run on remote nodes
+. $(dirname $0)/functions.sh
assert_DIR () {
local failed=""
- [ -z "`echo :$DIR: | grep :$MOUNT:`" ] && \
- failed=1 && echo "DIR not in $MOUNT. Aborting."
- [ -z "`echo :$DIR1: | grep :$MOUNT1:`" ] && \
- failed=1 && echo "DIR1 not in $MOUNT1. Aborting."
- [ -z "`echo :$DIR2: | grep :$MOUNT2:`" ] && \
- failed=1 && echo "DIR2 not in $MOUNT2. Aborting"
+ [[ $DIR/ = $MOUNT/* ]] || \
+ { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
+ [[ $DIR1/ = $MOUNT1/* ]] || \
+ { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
+ [[ $DIR2/ = $MOUNT2/* ]] || \
+ { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
[ -n "$failed" ] && exit 99 || true
}
init_test_env() {
export LUSTRE=`absolute_path $LUSTRE`
export TESTSUITE=`basename $0 .sh`
+ export TEST_FAILED=false
+
+ export MKE2FS=${MKE2FS:-mke2fs}
+ export DEBUGFS=${DEBUGFS:-debugfs}
+ export TUNE2FS=${TUNE2FS:-tune2fs}
+ export E2LABEL=${E2LABEL:-e2label}
+ export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
+ export E2FSCK=${E2FSCK:-e2fsck}
#[ -d /r ] && export ROOT=${ROOT:-/r}
export TMP=${TMP:-$ROOT/tmp}
export PATH=$PATH:$LUSTRE/tests
fi
export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mdsrate"}
- [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate)
+ [ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
+ if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
+ export PATH=$PATH:$LUSTRE/tests/racer
+ fi
export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
[ ! -f "$LCTL" ] && export LCTL=$(which lctl)
export LFS=${LFS:-"$LUSTRE/utils/lfs"}
export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
[ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
- export FSYTPE=${FSTYPE:-"ldiskfs"}
+ export FSTYPE=${FSTYPE:-"ldiskfs"}
export NAME=${NAME:-local}
export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
[ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
}
+case `uname -r` in
+2.4.*) EXT=".o"; USE_QUOTA=no; [ ! "$CLIENTONLY" ] && FSTYPE=ext3;;
+ *) EXT=".ko"; USE_QUOTA=yes;;
+esac
+
load_module() {
EXT=".ko"
module=$1
load_module ../libcfs/libcfs/libcfs
[ "$PTLDEBUG" ] && lctl set_param debug=$PTLDEBUG
[ "$SUBSYSTEM" ] && lctl set_param subsystem_debug=${SUBSYSTEM# }
+ local MODPROBECONF=
[ -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
- [ -f /etc/modprobe.d/Lustre ] && MODPROBECONF=/etc/modprobe.d/Lustre
- [ -z "$LNETOPTS" -a -n "$MODPROBECONF" ] && \
+ [ ! "$MODPROBECONF" -a -d /etc/modprobe.d ] && MODPROBECONF=/etc/modprobe.d/Lustre
+ [ -z "$LNETOPTS" -a "$MODPROBECONF" ] && \
LNETOPTS=$(awk '/^options lnet/ { print $0}' $MODPROBECONF | sed 's/^options lnet //g')
echo $LNETOPTS | grep -q "accept=all" || LNETOPTS="$LNETOPTS accept=all";
echo "lnet options: '$LNETOPTS'"
load_module obdclass/obdclass
load_module ptlrpc/ptlrpc
load_module ptlrpc/gss/ptlrpc_gss
- # Now, some modules depend on lquota without USE_QUOTA check,
- # will fix later. Disable check "$USE_QUOTA" = "yes" temporary.
- #[ "$USE_QUOTA" = "yes" ] && load_module quota/lquota
- load_module quota/lquota
- load_module fid/fid
+ [ "$USE_QUOTA" = "yes" -a "$LQUOTA" != "no" ] && load_module quota/lquota
load_module fld/fld
+ load_module fid/fid
load_module lmv/lmv
load_module mdc/mdc
load_module osc/osc
load_module mgc/mgc
if [ -z "$CLIENTONLY" ] && [ -z "$CLIENTMODSONLY" ]; then
grep -q crc16 /proc/kallsyms || { modprobe crc16 2>/dev/null || true; }
+ grep -q jbd /proc/kallsyms || { modprobe jbd 2>/dev/null || true; }
[ "$FSTYPE" = "ldiskfs" ] && load_module ../ldiskfs/ldiskfs/ldiskfs
load_module mgs/mgs
load_module mds/mds
load_module llite/lustre
load_module llite/llite_lloop
- rm -f $TMP/ogdb-$HOSTNAME
- OGDB=$TMP
- [ -d /r ] && OGDB="/r/tmp"
+ [ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
+ OGDB=${OGDB:-$TMP}
+ rm -f $OGDB/ogdb-$HOSTNAME
$LCTL modules > $OGDB/ogdb-$HOSTNAME
# 'mount' doesn't look in $PATH, just sbin
echo "$LEAK_LUSTRE" 1>&2
echo "$LEAK_PORTALS" 1>&2
mv $TMP/debug $TMP/debug-leak.`date +%s` || true
- log "Memory leaks detected"
+ echo "Memory leaks detected"
[ -n "$IGNORE_LEAK" ] && { echo "ignoring leaks" && return 0; } || true
return 1
fi
init_gss() {
if $GSS; then
start_gss_daemons
+
+ if [ -n "$LGSS_KEYRING_DEBUG" ]; then
+ echo $LGSS_KEYRING_DEBUG > /proc/fs/lustre/sptlrpc/gss/lgss_keyring/debug_level
+ fi
fi
}
lctl set_param debug_mb=${DEBUG_SIZE}; \
sync"
- label=$(do_facet ${facet} "e2label ${!dev}")
+ label=$(do_facet ${facet} "$E2LABEL ${!dev}")
[ -z "$label" ] && echo no label for ${!dev} && exit 1
eval export ${facet}_svc=${label}
echo Started ${label}
wait_exit_ST ${facet}
}
+# save quota version (both administrative and operational quotas)
+quota_save_version() {
+ local fsname=${2:-$FSNAME}
+ do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$1"
+ local varsvc
+ local osts=$(get_facets OST)
+ for ost in ${osts//,/ }; do
+ varsvc=${ost}_svc
+ do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$1"
+ done
+}
+
+# client could mount several lustre
+quota_type () {
+ local fsname=${1:-$FSNAME}
+ local rc=0
+ do_facet mgs lctl get_param mdd.${fsname}-MDT*.quota_type || rc=$?
+ do_nodes $(comma_list $(osts_nodes)) \
+ lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
+ return $rc
+}
+
+restore_quota_type () {
+ local mntpt=${1:-$MOUNT}
+ local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
+ if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
+ return
+ fi
+ $LFS quotaoff $mntpt
+ quota_save_version $old_QUOTA_TYPE
+ $LFS quotacheck -ug $mntpt
+}
+
+setup_quota(){
+ local mntpt=$1
+
+ # We need:
+ # 1. run quotacheck only if quota is off
+ # 2. save the original quota_type params, restore them after testing
+
+ # Suppose that quota type the same on mds and ost
+ local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
+ [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
+ if [ "$quota_type" != "$QUOTA_TYPE" ]; then
+ export old_QUOTA_TYPE=$quota_type
+ quota_save_version $QUOTA_TYPE
+ $LFS quotacheck -ug $mntpt
+ fi
+
+ local quota_usrs=$QUOTA_USERS
+
+ # get_filesystem_size
+ local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local blk_soft=$((disksz + 1024))
+ local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
+
+ local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local i_soft=$Inodes
+ local i_hard=$((i_soft + i_soft / 20))
+
+ echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
+ $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
+
+ local cmd
+ for usr in $quota_usrs; do
+ echo "Setting up quota on $client:$mntpt for $usr..."
+ for type in u g; do
+ cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
+ echo "+ $cmd"
+ eval $cmd || error "$cmd FAILED!"
+ done
+ # display the quota status
+ echo "Quota settings for $usr : "
+ $LFS quota -v -u $usr $mntpt || true
+ done
+}
+
zconf_mount() {
local OPTIONS
local client=$1
zconf_umount() {
local client=$1
local mnt=$2
+ local force
+ local busy
+ local need_kill
+
[ "$3" ] && force=-f
local running=$(do_node $client "grep -c $mnt' ' /proc/mounts") || true
if [ $running -ne 0 ]; then
echo "Stopping client $client $mnt (opts:$force)"
- lsof | grep "$mnt" || true
- do_node $client umount $force $mnt
+ do_node $client lsof -t $mnt || need_kill=no
+ if [ "x$force" != "x" -a "x$need_kill" != "xno" ]; then
+ pids=$(do_node $client lsof -t $mnt | sort -u);
+ if [ -n $pids ]; then
+ do_node $client kill -9 $pids || true
+ fi
+ fi
+
+ busy=$(do_node $client "umount $force $mnt 2>&1" | grep -c "busy") || true
+ if [ $busy -ne 0 ] ; then
+ echo "$mnt is still busy, wait one second" && sleep 1
+ do_node $client umount $force $mnt
+ fi
fi
}
+# nodes is comma list
+sanity_mount_check_nodes () {
+ local nodes=$1
+ shift
+ local mnts="$@"
+ local mnt
+
+ # FIXME: assume that all cluster nodes run the same os
+ [ "$(uname)" = Linux ] || return 0
+
+ local rc=0
+ for mnt in $mnts ; do
+ do_nodes $nodes "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
+mpts=\\\$(mount | grep -w -c $mnt);
+if [ \\\$running -ne \\\$mpts ]; then
+ echo \\\$(hostname) env are INSANE!;
+ exit 1;
+fi"
+ [ $? -eq 0 ] || rc=1
+ done
+ return $rc
+}
+
+sanity_mount_check_servers () {
+ echo Checking servers environments
+
+ # FIXME: modify get_facets to display all facets wo params
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ local node
+ local mnt
+ local facet
+ for facet in ${facets//,/ }; do
+ node=$(facet_host ${facet})
+ mnt=${MOUNT%/*}/${facet}
+ sanity_mount_check_nodes $node $mnt ||
+ { error "server $node environments are insane!"; return 1; }
+ done
+}
+
+sanity_mount_check_clients () {
+ local clients=${1:-$CLIENTS}
+ local mntpt=${2:-$MOUNT}
+ local mntpt2=${3:-$MOUNT2}
+
+ [ -z $clients ] && clients=$(hostname)
+ echo Checking clients $clients environments
+
+ sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
+ error "clients environments are insane!"
+}
+
+sanity_mount_check () {
+ sanity_mount_check_servers || return 1
+ sanity_mount_check_clients || return 2
+}
+
# mount clients if not mouted
zconf_mount_clients() {
local OPTIONS
fi
echo "Starting client $clients: $OPTIONS $device $mnt"
- do_nodes $clients "mount | grep $mnt || { mkdir -p $mnt && mount -t lustre $OPTIONS $device $mnt || false; }"
+
+ do_nodes $clients "set -x;
+running=\\\$(mount | grep -c $mnt' ');
+rc=0;
+if [ \\\$running -eq 0 ] ; then
+ mkdir -p $mnt;
+ mount -t lustre $OPTIONS $device $mnt;
+ rc=$?;
+fi;
+exit $rc"
echo "Started clients $clients: "
- do_nodes $clients "mount | grep $mnt"
+ do_nodes $clients "mount | grep -w $mnt"
do_nodes $clients "lctl set_param debug=$PTLDEBUG;
lctl set_param subsystem_debug=${SUBSYSTEM# };
zconf_umount_clients() {
local clients=$1
local mnt=$2
+ local force
+
[ "$3" ] && force=-f
- echo "Umounting clients: $clients"
echo "Stopping clients: $clients $mnt (opts:$force)"
- do_nodes $clients umount $force $mnt
+ do_nodes $clients "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
+if [ \\\$running -ne 0 ] ; then
+echo Stopping client \\\$(hostname) client $mnt opts:$force;
+lsof -t $mnt || need_kill=no;
+if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
+ pids=\\\$(lsof -t $mnt | sort -u);
+ if [ -n \\\"\\\$pids\\\" ]; then
+ kill -9 \\\$pids;
+ fi
+fi;
+busy=\\\$(umount $force $mnt 2>&1 | grep -c "busy");
+if [ \\\$busy -ne 0 ] ; then
+ echo "$mnt is still busy, wait one second" && sleep 1;
+ umount $force $mnt;
+fi
+fi"
+}
+
+shudown_node_hard () {
+ local host=$1
+ local attempts=3
+
+ for i in $(seq $attempts) ; do
+ $POWER_DOWN $host
+ sleep 1
+ ping -w 3 -c 1 $host > /dev/null 2>&1 || return 0
+ echo "waiting for $host to fail attempts=$attempts"
+ [ $i -lt $attempts ] || \
+ { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
+ done
+}
+
+shutdown_client() {
+ local client=$1
+ local mnt=${2:-$MOUNT}
+ local attempts=3
+
+ if [ "$FAILURE_MODE" = HARD ]; then
+ shudown_node_hard $client
+ else
+ zconf_umount_clients $client $mnt -f
+ fi
}
shutdown_facet() {
- facet=$1
+ local facet=$1
if [ "$FAILURE_MODE" = HARD ]; then
- $POWER_DOWN `facet_active_host $facet`
- sleep 2
+ shudown_node_hard $(facet_active_host $facet)
elif [ "$FAILURE_MODE" = SOFT ]; then
stop $facet
fi
fi
}
+# recovery-scale functions
+check_progs_installed () {
+ local clients=$1
+ shift
+ local progs=$@
+
+ do_nodes $clients "set -x ; PATH=:$PATH status=true; for prog in $progs; do
+ which \\\$prog || { echo \\\$prog missing on \\\$(hostname) && status=false; }
+ done;
+ eval \\\$status"
+}
+
+start_client_load() {
+ local client=$1
+ local var=${client}_load
+
+ do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
+ BREAK_ON_ERROR=$BREAK_ON_ERROR \
+ END_RUN_FILE=$END_RUN_FILE \
+ LOAD_PID_FILE=$LOAD_PID_FILE \
+ TESTSUITELOG=$TESTSUITELOG \
+ run_${!var}.sh" &
+ CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $!"
+ log "Started client load: ${!var} on $client"
+
+ return 0
+}
+
+start_client_loads () {
+ local -a clients=(${1//,/ })
+ local numloads=${#CLIENT_LOADS[@]}
+ local testnum
+
+ for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
+ testnum=$((nodenum % numloads))
+ eval export ${clients[nodenum]}_load=${CLIENT_LOADS[testnum]}
+ start_client_load ${clients[nodenum]}
+ done
+}
+
+# only for remote client
+check_client_load () {
+ local client=$1
+ local var=${client}_load
+
+ local TESTLOAD=run_${!var}.sh
+
+ ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
+
+ check_catastrophe $client || return 2
+
+ # see if the load is still on the client
+ local tries=3
+ local RC=254
+ while [ $RC = 254 -a $tries -gt 0 ]; do
+ let tries=$tries-1
+ # assume success
+ RC=0
+ if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
+ RC=${PIPESTATUS[0]}
+ sleep 30
+ fi
+ done
+ if [ $RC = 254 ]; then
+ echo "got a return status of $RC from do_node while checking (i.e. with 'ps') the client load on the remote system"
+ # see if we can diagnose a bit why this is
+ fi
+
+ return $RC
+}
+check_client_loads () {
+ local clients=${1//,/ }
+ local client=
+ local rc=0
+
+ for client in $clients; do
+ check_client_load $client
+ rc=${PIPESTATUS[0]}
+ if [ "$rc" != 0 ]; then
+ log "Client load failed on node $client, rc=$rc"
+ return $rc
+ fi
+ done
+}
+
+restart_client_loads () {
+ local clients=${1//,/ }
+ local expectedfail=${2:-""}
+ local client=
+ local rc=0
+
+ for client in $clients; do
+ check_client_load $client
+ rc=${PIPESTATUS[0]}
+ if [ "$rc" != 0 -a "$expectedfail" ]; then
+ start_client_load $client
+ echo "Restarted client load: on $client. Checking ..."
+ check_client_load $client
+ rc=${PIPESTATUS[0]}
+ if [ "$rc" != 0 ]; then
+ log "Client load failed to restart on node $client, rc=$rc"
+ # failure one client load means test fail
+ # we do not need to check other
+ return $rc
+ fi
+ else
+ return $rc
+ fi
+ done
+}
+# End recovery-scale functions
+
# verify that lustre actually cleaned up properly
cleanup_check() {
[ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && \
return 0
}
+wait_update () {
+ local node=$1
+ local TEST=$2
+ local FINAL=$3
+ local MAX=${4:-90}
+
+ local RESULT
+ local WAIT=0
+ local sleep=5
+ while [ $WAIT -lt $MAX ]; do
+ RESULT=$(do_node $node "$TEST")
+ if [ "$RESULT" == "$FINAL" ]; then
+ echo "Updated after $WAIT sec: wanted '$FINAL' got '$RESULT'"
+ return 0
+ fi
+ echo "Waiting $((MAX - WAIT)) secs for update"
+ WAIT=$((WAIT + sleep))
+ sleep $sleep
+ done
+ echo "Update not seen after $MAX sec: wanted '$FINAL' got '$RESULT'"
+ return 3
+}
+
+wait_update_facet () {
+ local facet=$1
+ wait_update $(facet_host $facet) $@
+}
+
wait_delete_completed () {
local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
}
wait_for_host() {
- HOST=$1
- check_network "$HOST" 900
- while ! do_node $HOST "ls -d $LUSTRE " > /dev/null; do sleep 5; done
+ local host=$1
+ check_network "$host" 900
+ while ! do_node $host "ls -d $LUSTRE " > /dev/null; do sleep 5; done
}
wait_for() {
- facet=$1
- HOST=`facet_active_host $facet`
- wait_for_host $HOST
+ local facet=$1
+ local host=`facet_active_host $facet`
+ wait_for_host $host
}
-wait_mds_recovery_done () {
- local timeout=`do_facet $SINGLEMDS lctl get_param -n timeout`
-#define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
-# as we are in process of changing obd_timeout in different ways
-# let's set MAX longer than that
- MAX=$(( timeout * 4 ))
- WAIT=0
+wait_recovery_complete () {
+ local facet=$1
+
+ # Use default policy if $2 is not passed by caller.
+ #define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
+ # as we are in process of changing obd_timeout in different ways
+ # let's set MAX longer than that
+ local MAX=${2:-$(( TIMEOUT * 4 ))}
+
+ local var_svc=${facet}_svc
+ local procfile="*.${!var_svc}.recovery_status"
+ local WAIT=0
+ local STATUS=
+
while [ $WAIT -lt $MAX ]; do
- STATUS=`do_facet $SINGLEMDS "lctl get_param -n mdt.*-MDT0000.recovery_status | grep status"`
- echo $STATUS | grep COMPLETE && return 0
+ STATUS=$(do_facet $facet lctl get_param -n $procfile | grep status)
+ [[ $STATUS = "status: COMPLETE" ]] && return 0
sleep 5
WAIT=$((WAIT + 5))
- echo "Waiting $(($MAX - $WAIT)) secs for MDS recovery done"
+ echo "Waiting $((MAX - WAIT)) secs for $facet recovery done. $STATUS"
done
- echo "MDS recovery not done in $MAX sec"
+ echo "$facet recovery not done in $MAX sec. $STATUS"
return 1
}
local WAIT=0
local INTERVAL=1
+ local running
# conf-sanity 31 takes a long time cleanup
while [ $WAIT -lt 300 ]; do
running=$(do_facet ${facet} "lsmod | grep lnet > /dev/null && lctl dl | grep ' ST '") || true
[ "$PDSH" = "no_dsh" ] && return 0
while [ $WAIT -lt $2 ]; do
- running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep)
- [ -z "${running}" ] && return 0
+ running=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep) || true
+ [ -z "${running}" ] && return 0 || true
echo "waited $WAIT for: "
echo "$running"
[ $INTERVAL -lt 60 ] && INTERVAL=$((INTERVAL + INTERVAL))
local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
[ -z "$pids" ] && return 0
echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
+ # FIXME: not portable
for pid in $pids; do
cat /proc/${pid}/status || true
cat /proc/${pid}/wchan || true
}
facet_failover() {
- facet=$1
+ local facet=$1
+ local sleep_time=$2
echo "Failing $facet on node `facet_active_host $facet`"
shutdown_facet $facet
+ [ -n "$sleep_time" ] && sleep $sleep_time
reboot_facet $facet
client_df &
DFPID=$!
echo "df pid is $DFPID"
change_active $facet
- TO=`facet_active_host $facet`
+ local TO=`facet_active_host $facet`
echo "Failover $facet to $TO"
wait_for $facet
mount_facet $facet || error "Restart of $facet failed"
facet_host() {
local facet=$1
+
+ [ "$facet" == client ] && echo -n $HOSTNAME && return
varname=${facet}_HOST
if [ -z "${!varname}" ]; then
if [ "${facet:0:3}" == "ost" ]; then
fail mds1
fi
- # assume client mount is local
- grep " $MOUNT " /proc/mounts && zconf_umount $HOSTNAME $MOUNT $*
- grep " $MOUNT2 " /proc/mounts && zconf_umount $HOSTNAME $MOUNT2 $*
+ local clients=$CLIENTS
+ [ -z $clients ] && clients=$(hostname)
- if [ -n "$CLIENTS" ]; then
- zconf_umount_clients $CLIENTS $MOUNT "$*" || true
- [ -n "$MOUNT2" ] && zconf_umount_clients $CLIENTS $MOUNT2 "$*" || true
- fi
+ zconf_umount_clients $clients $MOUNT "$*" || true
+ [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
[ "$CLIENTONLY" ] && return
# The add fn does rm ${facet}active file, this would be enough
}
formatall() {
+ if [ "$IAMDIR" == "yes" ]; then
+ MDS_MKFS_OPTS="$MDS_MKFS_OPTS --iam-dir"
+ MDSn_MKFS_OPTS="$MDSn_MKFS_OPTS --iam-dir"
+ fi
+
[ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
if [ ! -z $SEC ]; then
local num=$1
local switch=$2
local j=`expr $num - 1`
- local MDT="`do_facet mds$num lctl get_param -N mdt.*MDT*$j | cut -d"." -f2 2>/dev/null || true`"
+ local MDT="`(do_facet mds$num lctl get_param -N mdt.*MDT*$j 2>/dev/null | cut -d"." -f2 2>/dev/null) || true`"
if [ -z "$MDT" ]; then
return 2
zconf_mount `hostname` $1 || error "mount failed"
}
-set_obd_timeout() {
- local facet=$1
- local timeout=$2
-
- do_facet $facet lsmod | grep -q obdclass || \
- do_facet $facet "modprobe obdclass"
-
- do_facet $facet "lctl set_param timeout=$timeout"
-}
-
writeconf_facet () {
local facet=$1
local dev=$2
}
setupall() {
+ sanity_mount_check ||
+ error "environments are insane!"
+
load_modules
init_gss
if [ -z "$CLIENTONLY" ]; then
writeconf_all
for num in `seq $MDSCOUNT`; do
DEVNAME=$(mdsdevname $num)
- set_obd_timeout mds$num $TIMEOUT
start mds$num $DEVNAME $MDS_MOUNT_OPTS
# We started mds, now we should set failover variables properly.
done
for num in `seq $OSTCOUNT`; do
DEVNAME=$(ostdevname $num)
- set_obd_timeout ost$num $TIMEOUT
start ost$num $DEVNAME $OST_MOUNT_OPTS
# We started ost$num, now we should set ost${num}failover variable properly.
done
fi
+ # wait a while to allow sptlrpc configuration be propogated to targets,
+ # only needed when mounting new target devices.
+ $GSS && sleep 10
+
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
mount_client $MOUNT
[ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
[ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT2
fi
+ init_param_vars
+
# by remounting mdt before ost, initial connect from mdt to ost might
# timeout because ost is not ready yet. wait some time to its fully
# recovery. initial obd_connect timeout is 5s; in GSS case it's preceeded
eval export ${facet}_opt=\"$@\"
local dev=${facet}_dev
- local label=$(do_facet ${facet} "e2label ${!dev}")
+ local label=$(do_facet ${facet} "$E2LABEL ${!dev}")
[ -z "$label" ] && echo no label for ${!dev} && exit 1
eval export ${facet}_svc=${label}
init_facets_vars () {
local DEVNAME
- for num in `seq $MDSCOUNT`; do
- DEVNAME=`mdsdevname $num`
- init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
- done
+ if ! remote_mds_nodsh; then
+ for num in `seq $MDSCOUNT`; do
+ DEVNAME=`mdsdevname $num`
+ init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
+ done
+ fi
+
+ remote_ost_nodsh && return
for num in `seq $OSTCOUNT`; do
DEVNAME=`ostdevname $num`
done
}
+init_param_vars () {
+ if ! remote_ost_nodsh && ! remote_mds_nodsh; then
+ export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
+ export OSTVER=$(do_facet ost1 "lctl get_param version" | cut -d. -f1,2)
+ export CLIVER=$(lctl get_param version | cut -d. -f 1,2)
+ fi
+
+ remote_mds_nodsh ||
+ TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
+
+ log "Using TIMEOUT=$TIMEOUT"
+
+ if [ "$ENABLE_QUOTA" ]; then
+ setup_quota $MOUNT || return 2
+ fi
+}
+
+check_config () {
+ local mntpt=$1
+ local myMGS_host=$mgs_HOST
+ if [ "$NETTYPE" = "ptl" ]; then
+ myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
+ fi
+
+ echo Checking config lustre mounted on $mntpt
+ local mgshost=$(mount | grep " $mntpt " | awk -F@ '{print $1}')
+ mgshost=$(echo $mgshost | awk -F: '{print $1}')
+
+ if [ "$mgshost" != "$myMGS_host" ]; then
+ FAIL_ON_ERROR=true \
+ error "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
+ Please use correct config or set mds_HOST correctly!"
+ fi
+
+ sanity_mount_check ||
+ error "environments are insane!"
+}
+
+check_timeout () {
+ local mdstimeout=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
+ local cltimeout=$(lctl get_param -n timeout)
+ if [ $mdstimeout -ne $TIMEOUT ] || [ $mdstimeout -ne $cltimeout ]; then
+ error "timeouts are wrong! mds: $mdstimeout, client: $cltimeout, TIMEOUT=$TIMEOUT"
+ return 1
+ fi
+}
+
check_and_setup_lustre() {
- MOUNTED="`mounted_lustre_filesystems`"
- if [ -z "$MOUNTED" ]; then
+ local MOUNTED=$(mounted_lustre_filesystems)
+ if [ -z "$MOUNTED" ] || ! $(echo $MOUNTED | grep -w -q $MOUNT); then
[ "$REFORMAT" ] && formatall
setupall
- MOUNTED="`mounted_lustre_filesystems`"
+ MOUNTED=$(mounted_lustre_filesystems | head -1)
[ -z "$MOUNTED" ] && error "NAME=$NAME not mounted"
export I_MOUNTED=yes
else
+ check_config $MOUNT
init_facets_vars
+ init_param_vars
fi
if [ "$ONLY" == "setup" ]; then
exit 0
check_and_cleanup_lustre() {
if [ "`mount | grep $MOUNT`" ]; then
[ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]*
+ [ "$ENABLE_QUOTA" ] && restore_quota_type || true
fi
if [ "$I_MOUNTED" = "yes" ]; then
cleanupall -f || error "cleanup failed"
echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
}
+# list, excluded are the comma separated lists
+exclude_items_from_list () {
+ local list=$1
+ local excluded=$2
+ local item
+
+ list=${list//,/ }
+ for item in ${excluded//,/ }; do
+ list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
+ done
+ echo $(comma_list $list)
+}
+
+# list, expand are the comma separated lists
+expand_list () {
+ local list=${1//,/ }
+ local expand=${2//,/ }
+ local expanded=
+
+ expanded=$(for i in $list $expand; do echo $i; done | sort -u)
+ echo $(comma_list $expanded)
+}
+
absolute_path() {
(cd `dirname $1`; echo $PWD/`basename $1`)
}
+get_facets () {
+ local name=$(echo $1 | tr "[:upper:]" "[:lower:]")
+ local type=$(echo $1 | tr "[:lower:]" "[:upper:]")
+
+ local list=""
+ local count=${type}COUNT
+ for ((i=1; i<=${!count}; i++)) do
+ list="$list ${name}$i"
+ done
+ echo $(comma_list $list)
+}
+
##################################
# Adaptive Timeouts funcs
done
debugrestore
[ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
+ TEST_FAILED=true
}
error() {
IFS=abcdefghijklmnopqrstuvwxyz _basetest $1
}
+# print a newline if the last test was skipped
+export LAST_SKIPPED=
run_test() {
assert_DIR
if [ ! -z "$ONLY" ]; then
testname=ONLY_$1
if [ ${!testname}x != x ]; then
+ [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
run_one $1 "$2"
return $?
fi
testname=ONLY_$base
if [ ${!testname}x != x ]; then
+ [ "$LAST_SKIPPED" ] && echo "" && LAST_SKIPPED=
run_one $1 "$2"
return $?
fi
+ LAST_SKIPPED="y"
echo -n "."
return 0
fi
testname=EXCEPT_$1
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1"
return 0
fi
testname=EXCEPT_$base
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_SLOW_$1
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1"
return 0
fi
testname=EXCEPT_SLOW_$base
if [ ${!testname}x != x ]; then
+ LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
return 0
fi
+ LAST_SKIPPED=
run_one $1 "$2"
return $?
lsmod | grep lnet > /dev/null || load_modules
local MSG="$*"
- # Get rif of '
+ # Get rid of '
MSG=${MSG//\'/\\\'}
MSG=${MSG//\(/\\\(}
MSG=${MSG//\)/\\\)}
}
pass() {
- echo PASS $@
+ $TEST_FAILED && echo -n "FAIL " || echo -n "PASS "
+ echo $@
}
check_mds() {
message=$2
tfile=f${testnum}
export tdir=d0.${TESTSUITE}/d${base}
+
local SAVE_UMASK=`umask`
umask 0022
- BEFORE=`date +%s`
- log "== test $testnum: $message ============ `date +%H:%M:%S` ($BEFORE)"
+ local BEFORE=`date +%s`
+ log "== test $testnum: $message == `date +%H:%M:%S` ($BEFORE)"
#check_mds
export TESTNAME=test_$testnum
+ TEST_FAILED=false
test_${testnum} || error "test_$testnum failed with $?"
#check_mds
cd $SAVE_PWD
check_catastrophe || error "LBUG/LASSERT detected"
ps auxww | grep -v grep | grep -q multiop && error "multiop still running"
pass "($((`date +%s` - $BEFORE))s)"
+ TEST_FAILED=false
unset TESTNAME
unset tdir
umask $SAVE_UMASK
remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
}
+remote_mgs_nodsh()
+{
+ local MGS
+ MGS=$(facet_host mgs)
+ remote_node $MGS && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
+}
+
mdts_nodes () {
local MDSNODES
local NODES_sort
CLIENTCOUNT=$((${#remoteclients[@]} + 1))
}
+get_random_entry () {
+ local rnodes=$1
+
+ rnodes=${rnodes//,/ }
+
+ local -a nodes=($rnodes)
+ local num=${#nodes[@]}
+ local i=$((RANDOM * num * 2 / 65536))
+
+ echo ${nodes[i]}
+}
+
is_patchless ()
{
lctl get_param version | grep -q patchless
}
+check_versions () {
+ [ "$MDSVER" = "$CLIVER" -a "$OSTVER" = "$CLIVER" ]
+}
+
get_node_count() {
- local nodes="$@"
- echo $nodes | wc -w || true
+ local nodes="$@"
+ echo $nodes | wc -w || true
}
mixed_ost_devs () {
check_runas_id_ret() {
local myRC=0
- local myRUNAS_ID=$1
- shift
+ local myRUNAS_UID=$1
+ local myRUNAS_GID=$2
+ shift 2
local myRUNAS=$@
if [ -z "$myRUNAS" ]; then
error_exit "myRUNAS command must be specified for check_runas_id"
fi
mkdir $DIR/d0_runas_test
chmod 0755 $DIR
- chown $myRUNAS_ID:$myRUNAS_ID $DIR/d0_runas_test
+ chown $myRUNAS_UID:$myRUNAS_GID $DIR/d0_runas_test
$myRUNAS touch $DIR/d0_runas_test/f$$ || myRC=$?
rm -rf $DIR/d0_runas_test
return $myRC
}
check_runas_id() {
- local myRUNAS_ID=$1
- shift
+ local myRUNAS_UID=$1
+ local myRUNAS_GID=$2
+ shift 2
local myRUNAS=$@
- check_runas_id_ret $myRUNAS_ID $myRUNAS || \
- error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_ID.
+ check_runas_id_ret $myRUNAS_UID $myRUNAS_GID $myRUNAS || \
+ error "unable to write to $DIR/d0_runas_test as UID $myRUNAS_UID.
Please set RUNAS_ID to some UID which exists on MDS and client or
- add user $myRUNAS_ID:$myRUNAS_ID on these nodes."
+ add user $myRUNAS_UID:$myRUNAS_GID on these nodes."
}
# Run multiop in the background, but wait for it to print
return 0
}
-check_rate() {
- local OP=$1
- local TARGET_RATE=$2
- local NUM_CLIENTS=$3
- local LOG=$4
-
- local RATE=$(awk '/^Rate: [0-9\.]+ '"${OP}"'s\/sec/ { print $2}' ${LOG})
-
- # We need to use bc since the rate is a floating point number
- local RES=$(echo "${RATE} < ${TARGET_RATE}" | bc -l )
- if [ ${RES} -eq 0 ]; then
- echo "Success: ${RATE} ${OP}s/sec met target rate" \
- "${TARGET_RATE} ${OP}s/sec for ${NUM_CLIENTS} client(s)."
- return 0
- else
- echo "Failure: ${RATE} ${OP}s/sec did not meet target rate" \
- "${TARGET_RATE} ${OP}s/sec for ${NUM_CLIENTS} client(s)."
- return 1
- fi
+inodes_available () {
+ local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
+ echo $IFree
}
# reset llite stat counters
echo $res
}
+# reset osc stat counters
+clear_osc_stats(){
+ lctl set_param -n osc.*.osc_stats 0
+}
+
+# sum osc stat items
+calc_osc_stats() {
+ local res=$(lctl get_param -n osc.*.osc_stats |
+ awk 'BEGIN {s = 0} END {print s} /^'"$1"'/ {s += $2}')
+ echo $res
+}
+
calc_sum () {
awk 'BEGIN {s = 0}; {s += $1}; END {print s}'
}
calc_osc_kbytes () {
+ df $MOUNT > /dev/null
$LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
}
}
check_catastrophe () {
- local rnodes=$(comma_list $(remote_nodes_list))
+ local rnodes=${1:-$(comma_list $(remote_nodes_list))}
- [ -f $CATASTROPHE ] && [ `cat $CATASTROPHE` -ne 0 ] && return 1
+ [ -f $CATASTROPHE ] && [ $(cat $CATASTROPHE) -ne 0 ] && return 1
if [ $rnodes ]; then
- do_nodes $rnodes "[ -f $CATASTROPHE ] && { [ \`cat $CATASTROPHE\` -eq 0 ] || false; } || true"
+ do_nodes $rnodes "set -x; [ -f $CATASTROPHE ] && { [ \`cat $CATASTROPHE\` -eq 0 ] || false; } || true"
fi
}
+# $1 node
+# $2 file
+# $3 $RUNAS
+get_stripe_info() {
+ local tmp_file
+
+ stripe_size=0
+ stripe_count=0
+ stripe_index=0
+ tmp_file=$(mktemp)
+
+ do_facet $1 $3 lfs getstripe -v $2 > $tmp_file
+
+ stripe_size=`awk '$1 ~ /size/ {print $2}' $tmp_file`
+ stripe_count=`awk '$1 ~ /count/ {print $2}' $tmp_file`
+ stripe_index=`awk '/obdidx/ {start = 1; getline; print $1; exit}' $tmp_file`
+ rm -f $tmp_file
+}
+
+# CMD: determine mds index where directory inode presents
+get_mds_dir () {
+ local dir=$1
+ local file=$dir/f0.get_mds_dir_tmpfile
+
+ rm -f $file
+ local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
+ local oldused=($iused)
+
+ touch $file
+ sleep 1
+ iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
+ local newused=($iused)
+
+ local num=0
+ for ((i=0; i<${#newused[@]}; i++)); do
+ if [ ${oldused[$i]} -lt ${newused[$i]} ]; then
+ echo $(( i + 1 ))
+ rm -f $file
+ return 0
+ fi
+ done
+ error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
+}
+
+mpi_run () {
+ local mpirun="$MPIRUN $MPIRUN_OPTIONS"
+ local command="$mpirun $@"
+ local mpilog=$TMP/mpi.log
+ local rc
+
+ if [ "$MPI_USER" != root -a $mpirun ]; then
+ echo "+ chmod 0777 $MOUNT"
+ chmod 0777 $MOUNT
+ command="su $MPI_USER sh -c \"$command \""
+ fi
+
+ ls -ald $MOUNT
+ echo "+ $command"
+ eval $command 2>&1 > $mpilog || true
+
+ rc=${PIPESTATUS[0]}
+ if [ $rc -eq 0 ] && grep -q "p4_error: : [^0]" $mpilog ; then
+ rc=1
+ fi
+ cat $mpilog
+ return $rc
+}
+
+mdsrate_cleanup () {
+ mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
+}
+
+delayed_recovery_enabled () {
+ local var=${SINGLEMDS}_svc
+ do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
+}
+