#export PDSH="pdsh -S -Rssh -w"
-# eg, assert_env LUSTRE MDSNODES OSTNODES CLIENTS
-assert_env() {
- local failed=""
- for name in $@; do
- if [ -z "${!name}" ]; then
- echo "$0: $name must be set"
- failed=1
- fi
- done
- [ $failed ] && exit 1 || true
-}
+# function used by scripts run on remote nodes
+. $(dirname $0)/functions.sh
assert_DIR () {
local failed=""
wait_exit_ST ${facet}
}
+# save quota version (both administrative and operational quotas)
+quota_save_version() {
+ local fsname=${2:-$FSNAME}
+ do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$1"
+ local varsvc
+ local osts=$(get_facets OST)
+ for ost in ${osts//,/ }; do
+ varsvc=${ost}_svc
+ do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$1"
+ done
+}
+
+# client could mount several lustre
+quota_type () {
+ local fsname=${1:-$FSNAME}
+ local rc=0
+ do_facet mgs lctl get_param mdd.${fsname}-MDT*.quota_type || rc=$?
+ do_nodes $(comma_list $(osts_nodes)) \
+ lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
+ return $rc
+}
+
+restore_quota_type () {
+ local mntpt=${1:-$MOUNT}
+ local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
+ if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
+ return
+ fi
+ $LFS quotaoff $mntpt
+ quota_save_version $old_QUOTA_TYPE
+ $LFS quotacheck -ug $mntpt
+}
+
+setup_quota(){
+ local mntpt=$1
+
+ # We need:
+ # 1. run quotacheck only if quota is off
+ # 2. save the original quota_type params, restore them after testing
+
+ # Suppose that quota type the same on mds and ost
+ local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
+ [ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
+ if [ "$quota_type" != "$QUOTA_TYPE" ]; then
+ export old_QUOTA_TYPE=$quota_type
+ quota_save_version $QUOTA_TYPE
+ $LFS quotacheck -ug $mntpt
+ fi
+
+ local quota_usrs=$QUOTA_USERS
+
+ # get_filesystem_size
+ local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local blk_soft=$((disksz + 1024))
+ local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
+
+ local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local i_soft=$Inodes
+ local i_hard=$((i_soft + i_soft / 20))
+
+ echo "Total disk size: $disksz block-softlimit: $blk_soft block-hardlimit:
+ $blk_hard inode-softlimit: $i_soft inode-hardlimit: $i_hard"
+
+ local cmd
+ for usr in $quota_usrs; do
+ echo "Setting up quota on $client:$mntpt for $usr..."
+ for type in u g; do
+ cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
+ echo "+ $cmd"
+ eval $cmd || error "$cmd FAILED!"
+ done
+ # display the quota status
+ echo "Quota settings for $usr : "
+ $LFS quota -v -u $usr $mntpt || true
+ done
+}
+
zconf_mount() {
local OPTIONS
local client=$1
fi
}
+# nodes is comma list
+sanity_mount_check_nodes () {
+ local nodes=$1
+ shift
+ local mnts="$@"
+ local mnt
+
+ # FIXME: assume that all cluster nodes run the same os
+ [ "$(uname)" = Linux ] || return 0
+
+ local rc=0
+ for mnt in $mnts ; do
+ do_nodes $nodes "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
+mpts=\\\$(mount | grep -w -c $mnt);
+if [ \\\$running -ne \\\$mpts ]; then
+ echo \\\$(hostname) env are INSANE!;
+ exit 1;
+fi"
+ [ $? -eq 0 ] || rc=1
+ done
+ return $rc
+}
+
+sanity_mount_check_servers () {
+ echo Checking servers environments
+
+ # FIXME: modify get_facets to display all facets wo params
+ local facets="$(get_facets OST),$(get_facets MDS)"
+ local node
+ local mnt
+ local facet
+ for facet in ${facets//,/ }; do
+ node=$(facet_host ${facet})
+ mnt=${MOUNT%/*}/${facet}
+ sanity_mount_check_nodes $node $mnt ||
+ { error "server $node environments are insane!"; return 1; }
+ done
+}
+
+sanity_mount_check_clients () {
+ local clients=${1:-$CLIENTS}
+ local mntpt=${2:-$MOUNT}
+ local mntpt2=${3:-$MOUNT2}
+
+ [ -z $clients ] && clients=$(hostname)
+ echo Checking clients $clients environments
+
+ sanity_mount_check_nodes $clients $mntpt $mntpt2 ||
+ error "clients environments are insane!"
+}
+
+sanity_mount_check () {
+ sanity_mount_check_servers || return 1
+ sanity_mount_check_clients || return 2
+}
+
# mount clients if not mouted
zconf_mount_clients() {
local OPTIONS
fi
echo "Starting client $clients: $OPTIONS $device $mnt"
- do_nodes $clients "mount | grep $mnt || { mkdir -p $mnt && mount -t lustre $OPTIONS $device $mnt || false; }"
+
+ do_nodes $clients "set -x;
+running=\\\$(mount | grep -c $mnt' ');
+rc=0;
+if [ \\\$running -eq 0 ] ; then
+ mkdir -p $mnt;
+ mount -t lustre $OPTIONS $device $mnt;
+ rc=$?;
+fi;
+exit $rc"
echo "Started clients $clients: "
- do_nodes $clients "mount | grep $mnt"
+ do_nodes $clients "mount | grep -w $mnt"
do_nodes $clients "lctl set_param debug=$PTLDEBUG;
lctl set_param subsystem_debug=${SUBSYSTEM# };
[ "$3" ] && force=-f
echo "Stopping clients: $clients $mnt (opts:$force)"
- do_nodes $clients "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts)
+ do_nodes $clients "set -x; running=\\\$(grep -c $mnt' ' /proc/mounts);
if [ \\\$running -ne 0 ] ; then
-echo Stopping client \\\$(hostname) client $mnt opts:$force
-lsof -t $mnt || need_kill=no
+echo Stopping client \\\$(hostname) client $mnt opts:$force;
+lsof -t $mnt || need_kill=no;
if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
pids=\\\$(lsof -t $mnt | sort -u);
- if [ -n \\\$pids ]; then
- kill -9 \\\$pids
+ if [ -n \\\"\\\$pids\\\" ]; then
+ kill -9 \\\$pids;
fi
-fi
-busy=\\\$(umount $force $mnt 2>&1 | grep -c "busy")
+fi;
+busy=\\\$(umount $force $mnt 2>&1 | grep -c "busy");
if [ \\\$busy -ne 0 ] ; then
- echo "$mnt is still busy, wait one second" && sleep 1
- umount $force $mnt
+ echo "$mnt is still busy, wait one second" && sleep 1;
+ umount $force $mnt;
fi
fi"
}
+shudown_node_hard () {
+ local host=$1
+ local attempts=3
+
+ for i in $(seq $attempts) ; do
+ $POWER_DOWN $host
+ sleep 1
+ ping -w 3 -c 1 $host > /dev/null 2>&1 || return 0
+ echo "waiting for $host to fail attempts=$attempts"
+ [ $i -lt $attempts ] || \
+ { echo "$host still pingable after power down! attempts=$attempts" && return 1; }
+ done
+}
+
+shutdown_client() {
+ local client=$1
+ local mnt=${2:-$MOUNT}
+ local attempts=3
+
+ if [ "$FAILURE_MODE" = HARD ]; then
+ shudown_node_hard $client
+ else
+ zconf_umount_clients $client $mnt -f
+ fi
+}
+
shutdown_facet() {
local facet=$1
if [ "$FAILURE_MODE" = HARD ]; then
- $POWER_DOWN `facet_active_host $facet`
- sleep 2
+ shudown_node_hard $(facet_active_host $facet)
elif [ "$FAILURE_MODE" = SOFT ]; then
stop $facet
fi
}
start_client_load() {
- local list=(${1//,/ })
- local nodenum=$2
-
- local numloads=${#CLIENT_LOADS[@]}
- local testnum=$((nodenum % numloads))
+ local client=$1
+ local var=${client}_load
- do_node ${list[nodenum]} "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
+ do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
BREAK_ON_ERROR=$BREAK_ON_ERROR \
END_RUN_FILE=$END_RUN_FILE \
LOAD_PID_FILE=$LOAD_PID_FILE \
TESTSUITELOG=$TESTSUITELOG \
- run_${CLIENT_LOADS[testnum]}.sh" &
+ run_${!var}.sh" &
CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $!"
- log "Started client load: ${CLIENT_LOADS[testnum]} on ${list[nodenum]}"
+ log "Started client load: ${!var} on $client"
- eval export ${list[nodenum]}_load=${CLIENT_LOADS[testnum]}
return 0
}
start_client_loads () {
- local clients=(${1//,/ })
+ local -a clients=(${1//,/ })
+ local numloads=${#CLIENT_LOADS[@]}
+ local testnum
- for ((num=0; num < ${#clients[@]}; num++ )); do
- start_client_load $1 $num
+ for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
+ testnum=$((nodenum % numloads))
+ eval export ${clients[nodenum]}_load=${CLIENT_LOADS[testnum]}
+ start_client_load ${clients[nodenum]}
done
}
for client in $clients; do
check_client_load $client
- rc=$?
+ rc=${PIPESTATUS[0]}
if [ "$rc" != 0 ]; then
log "Client load failed on node $client, rc=$rc"
return $rc
fi
done
}
+
+restart_client_loads () {
+ local clients=${1//,/ }
+ local expectedfail=${2:-""}
+ local client=
+ local rc=0
+
+ for client in $clients; do
+ check_client_load $client
+ rc=${PIPESTATUS[0]}
+ if [ "$rc" != 0 -a "$expectedfail" ]; then
+ start_client_load $client
+ echo "Restarted client load: on $client. Checking ..."
+ check_client_load $client
+ rc=${PIPESTATUS[0]}
+ if [ "$rc" != 0 ]; then
+ log "Client load failed to restart on node $client, rc=$rc"
+ # failure one client load means test fail
+ # we do not need to check other
+ return $rc
+ fi
+ else
+ return $rc
+ fi
+ done
+}
# End recovery-scale functions
# verify that lustre actually cleaned up properly
}
wait_for_host() {
- local HOST=$1
- check_network "$HOST" 900
- while ! do_node $HOST "ls -d $LUSTRE " > /dev/null; do sleep 5; done
+ local host=$1
+ check_network "$host" 900
+ while ! do_node $host "ls -d $LUSTRE " > /dev/null; do sleep 5; done
}
wait_for() {
local facet=$1
- local HOST=`facet_active_host $facet`
- wait_for_host $HOST
+ local host=`facet_active_host $facet`
+ wait_for_host $host
}
-wait_mds_recovery_done () {
- local timeout=`do_facet $SINGLEMDS lctl get_param -n timeout`
-#define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
-# as we are in process of changing obd_timeout in different ways
-# let's set MAX longer than that
- local MAX=$(( timeout * 4 ))
+wait_recovery_complete () {
+ local facet=$1
+
+ # Use default policy if $2 is not passed by caller.
+ #define OBD_RECOVERY_TIMEOUT (obd_timeout * 5 / 2)
+ # as we are in process of changing obd_timeout in different ways
+ # let's set MAX longer than that
+ local MAX=${2:-$(( TIMEOUT * 4 ))}
+
+ local var_svc=${facet}_svc
+ local procfile="*.${!var_svc}.recovery_status"
local WAIT=0
+ local STATUS=
+
while [ $WAIT -lt $MAX ]; do
- STATUS=`do_facet $SINGLEMDS "lctl get_param -n mdt.*-MDT0000.recovery_status | grep status"`
- echo $STATUS | grep COMPLETE && return 0
+ STATUS=$(do_facet $facet lctl get_param -n $procfile | grep status)
+ [[ $STATUS = "status: COMPLETE" ]] && return 0
sleep 5
WAIT=$((WAIT + 5))
- echo "Waiting $(($MAX - $WAIT)) secs for MDS recovery done"
+ echo "Waiting $((MAX - WAIT)) secs for $facet recovery done. $STATUS"
done
- echo "MDS recovery not done in $MAX sec"
+ echo "$facet recovery not done in $MAX sec. $STATUS"
return 1
}
local pids=$(ps uax | grep "$PDSH.*$prog.*$MOUNT" | grep -v grep | awk '{print $2}')
[ -z "$pids" ] && return 0
echo "$PDSH processes still exists after $WAIT seconds. Still running: $pids"
+ # FIXME: not portable
for pid in $pids; do
cat /proc/${pid}/status || true
cat /proc/${pid}/wchan || true
DFPID=$!
echo "df pid is $DFPID"
change_active $facet
- TO=`facet_active_host $facet`
+ local TO=`facet_active_host $facet`
echo "Failover $facet to $TO"
wait_for $facet
mount_facet $facet || error "Restart of $facet failed"
fail mds1
fi
- # assume client mount is local
- grep " $MOUNT " /proc/mounts && zconf_umount $HOSTNAME $MOUNT $*
- grep " $MOUNT2 " /proc/mounts && zconf_umount $HOSTNAME $MOUNT2 $*
+ local clients=$CLIENTS
+ [ -z $clients ] && clients=$(hostname)
- if [ -n "$CLIENTS" ]; then
- zconf_umount_clients $CLIENTS $MOUNT "$*" || true
- [ -n "$MOUNT2" ] && zconf_umount_clients $CLIENTS $MOUNT2 "$*" || true
- fi
+ zconf_umount_clients $clients $MOUNT "$*" || true
+ [ -n "$MOUNT2" ] && zconf_umount_clients $clients $MOUNT2 "$*" || true
[ "$CLIENTONLY" ] && return
# The add fn does rm ${facet}active file, this would be enough
}
setupall() {
+ sanity_mount_check ||
+ error "environments are insane!"
+
load_modules
init_gss
if [ -z "$CLIENTONLY" ]; then
init_facets_vars () {
local DEVNAME
- for num in `seq $MDSCOUNT`; do
- DEVNAME=`mdsdevname $num`
- init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
- done
+ if ! remote_mds_nodsh; then
+ for num in `seq $MDSCOUNT`; do
+ DEVNAME=`mdsdevname $num`
+ init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
+ done
+ fi
+
+ remote_ost_nodsh && return
for num in `seq $OSTCOUNT`; do
DEVNAME=`ostdevname $num`
}
init_param_vars () {
- export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
- export OSTVER=$(do_facet ost1 "lctl get_param version" | cut -d. -f1,2)
- export CLIVER=$(lctl get_param version | cut -d. -f 1,2)
+ if ! remote_ost_nodsh && ! remote_mds_nodsh; then
+ export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
+ export OSTVER=$(do_facet ost1 "lctl get_param version" | cut -d. -f1,2)
+ export CLIVER=$(lctl get_param version | cut -d. -f 1,2)
+ fi
+
+ remote_mds_nodsh ||
+ TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
- TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
log "Using TIMEOUT=$TIMEOUT"
+
+ if [ "$ENABLE_QUOTA" ]; then
+ setup_quota $MOUNT || return 2
+ fi
}
check_config () {
error "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
Please use correct config or set mds_HOST correctly!"
fi
+
+ sanity_mount_check ||
+ error "environments are insane!"
}
check_timeout () {
check_and_cleanup_lustre() {
if [ "`mount | grep $MOUNT`" ]; then
[ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]*
+ [ "$ENABLE_QUOTA" ] && restore_quota_type || true
fi
if [ "$I_MOUNTED" = "yes" ]; then
cleanupall -f || error "cleanup failed"
echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
}
-# list is comma separated list
-exclude_item_from_list () {
+# list, excluded are the comma separated lists
+exclude_items_from_list () {
local list=$1
local excluded=$2
+ local item
list=${list//,/ }
- list=$(echo " $list " | sed -re "s/\s+$excluded\s+/ /g")
+ for item in ${excluded//,/ }; do
+ list=$(echo " $list " | sed -re "s/\s+$item\s+/ /g")
+ done
echo $(comma_list $list)
}
+# list, expand are the comma separated lists
+expand_list () {
+ local list=${1//,/ }
+ local expand=${2//,/ }
+ local expanded=
+
+ expanded=$(for i in $list $expand; do echo $i; done | sort -u)
+ echo $(comma_list $expanded)
+}
+
absolute_path() {
(cd `dirname $1`; echo $PWD/`basename $1`)
}
+get_facets () {
+ local name=$(echo $1 | tr "[:upper:]" "[:lower:]")
+ local type=$(echo $1 | tr "[:lower:]" "[:upper:]")
+
+ local list=""
+ local count=${type}COUNT
+ for ((i=1; i<=${!count}; i++)) do
+ list="$list ${name}$i"
+ done
+ echo $(comma_list $list)
+}
+
##################################
# Adaptive Timeouts funcs
lsmod | grep lnet > /dev/null || load_modules
local MSG="$*"
- # Get rif of '
+ # Get rid of '
MSG=${MSG//\'/\\\'}
MSG=${MSG//\(/\\\(}
MSG=${MSG//\)/\\\)}
umask 0022
local BEFORE=`date +%s`
- log "== test $testnum: $message ============ `date +%H:%M:%S` ($BEFORE)"
+ log "== test $testnum: $message == `date +%H:%M:%S` ($BEFORE)"
#check_mds
export TESTNAME=test_$testnum
TEST_FAILED=false
rnodes=${rnodes//,/ }
- local nodes=($rnodes)
+ local -a nodes=($rnodes)
local num=${#nodes[@]}
- local i=$((RANDOM * num / 65536))
+ local i=$((RANDOM * num * 2 / 65536))
echo ${nodes[i]}
}
}
calc_osc_kbytes () {
+ df $MOUNT > /dev/null
$LCTL get_param -n osc.*[oO][sS][cC][-_][0-9a-f]*.$1 | calc_sum
}
mpi_run () {
local mpirun="$MPIRUN $MPIRUN_OPTIONS"
local command="$mpirun $@"
+ local mpilog=$TMP/mpi.log
+ local rc
if [ "$MPI_USER" != root -a $mpirun ]; then
echo "+ chmod 0777 $MOUNT"
ls -ald $MOUNT
echo "+ $command"
- eval $command
+ eval $command 2>&1 > $mpilog || true
+
+ rc=${PIPESTATUS[0]}
+ if [ $rc -eq 0 ] && grep -q "p4_error: : [^0]" $mpilog ; then
+ rc=1
+ fi
+ cat $mpilog
+ return $rc
}
mdsrate_cleanup () {
- mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5
+ mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
+}
+
+delayed_recovery_enabled () {
+ local var=${SINGLEMDS}_svc
+ do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
}