[ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
MODPROBECONF=/etc/modprobe.conf
+sanitize_parameters() {
+ for i in DIR DIR1 DIR2 MOUNT MOUNT1 MOUNT2
+ do
+ local path=${!i}
+ if [ -d "$path" ]; then
+ eval export $i=$(echo $path | sed -E 's/\/+$//g')
+ fi
+ done
+}
assert_DIR () {
- local failed=""
- [[ $DIR/ = $MOUNT/* ]] || \
- { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
- [[ $DIR1/ = $MOUNT1/* ]] || \
- { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
- [[ $DIR2/ = $MOUNT2/* ]] || \
- { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
+ local failed=""
+ [[ $DIR/ = $MOUNT/* ]] ||
+ { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
+ [[ $DIR1/ = $MOUNT1/* ]] ||
+ { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
+ [[ $DIR2/ = $MOUNT2/* ]] ||
+ { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
- [ -n "$failed" ] && exit 99 || true
+ [ -n "$failed" ] && exit 99 || true
}
usage() {
load_module lov/lov
load_module mgc/mgc
load_module obdecho/obdecho
- if ! client_only; then
- SYMLIST=/proc/kallsyms
- grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
- grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
- grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
+ if ! client_only; then
+ SYMLIST=/proc/kallsyms
+ grep -q crc16 $SYMLIST ||
+ { modprobe crc16 2>/dev/null || true; }
+ grep -q -w jbd2 $SYMLIST ||
+ { modprobe jbd2 2>/dev/null || true; }
load_module lfsck/lfsck
- [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
+ [ "$LQUOTA" != "no" ] &&
+ load_module quota/lquota $LQUOTAOPTS
if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
modprobe zfs
load_module osd-zfs/osd_zfs
if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
grep -q exportfs_decode_fh $SYMLIST ||
{ modprobe exportfs 2> /dev/null || true; }
+ grep -q -w mbcache $SYMLIST ||
+ { modprobe mbcache 2>/dev/null || true; }
load_module ../ldiskfs/ldiskfs
load_module osd-ldiskfs/osd_ldiskfs
fi
load_module osp/osp
load_module ofd/ofd
load_module osp/osp
- fi
+ fi
load_module llite/lustre
llite_lloop_enabled && load_module llite/llite_lloop
facet_number() {
local facet=$1
- if [ $facet == mgs ]; then
+ if [ $facet == mgs ] || [ $facet == client ]; then
return 1
fi
local opt=${facet}_opt
local mntpt=$(facet_mntpt $facet)
local opts="${!opt} $@"
+ local fstype=$(facet_fstype $facet)
+ local devicelabel
module_loaded lustre || load_modules
import_zpool $facet || return ${PIPESTATUS[0]}
fi
+ case $fstype in
+ ldiskfs)
+ devicelabel=$(do_facet ${facet} "$E2LABEL ${!dev}");;
+ zfs)
+ devicelabel=$(do_facet ${facet} "$ZFS get -H -o value \
+ lustre:svname ${!dev}");;
+ *)
+ error "unknown fstype!";;
+ esac
+
echo "Starting ${facet}: $opts ${!dev} $mntpt"
# for testing LU-482 error handling in mount_facets() and test_0a()
if [ -f $TMP/test-lu482-trigger ]; then
if [[ $opts =~ .*nosvc.* ]]; then
echo "Start ${!dev} without service"
else
- local fstype=$(facet_fstype $facet)
case $fstype in
ldiskfs)
esac
fi
+ # commit the device label change to disk
+ if [[ $devicelabel =~ (:[a-zA-Z]{3}[0-9]{4}) ]]; then
+ do_facet $facet "sync; sync; sync"
+ fi
+
+
label=$(devicelabel ${facet} ${!dev})
[ -z "$label" ] && echo no label for ${!dev} && exit 1
eval export ${facet}_svc=${label}
}
zconf_mount() {
- local client=$1
- local mnt=$2
- local opts=${3:-$MOUNT_OPTS}
- opts=${opts:+-o $opts}
- local flags=${4:-$MOUNT_FLAGS}
-
- local device=$MGSNID:/$FSNAME
- if [ -z "$mnt" -o -z "$FSNAME" ]; then
- echo Bad zconf mount command: opt=$flags $opts dev=$device mnt=$mnt
- exit 1
- fi
-
- echo "Starting client: $client: $flags $opts $device $mnt"
- do_node $client mkdir -p $mnt
- do_node $client $MOUNT_CMD $flags $opts $device $mnt || return 1
-
- set_default_debug_nodes $client
+ local client=$1
+ local mnt=$2
+ local opts=${3:-$MOUNT_OPTS}
+ opts=${opts:+-o $opts}
+ local flags=${4:-$MOUNT_FLAGS}
+
+ local device=$MGSNID:/$FSNAME$FILESET
+ if [ -z "$mnt" -o -z "$FSNAME" ]; then
+ echo "Bad mount command: opt=$flags $opts dev=$device " \
+ "mnt=$mnt"
+ exit 1
+ fi
+
+ echo "Starting client: $client: $flags $opts $device $mnt"
+ do_node $client mkdir -p $mnt
+ if [ -n "$FILESET" -a -z "$SKIP_FILESET" ];then
+ do_node $client $MOUNT_CMD $flags $opts $MGSNID:/$FSNAME \
+ $mnt || return 1
+ #disable FILESET if not supported
+ do_nodes $client lctl get_param -n \
+ mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
+ device=$MGSNID:/$FSNAME
+ do_node $client mkdir -p $mnt/$FILESET
+ do_node $client "! grep -q $mnt' ' /proc/mounts ||
+ umount $mnt"
+ fi
+ do_node $client $MOUNT_CMD $flags $opts $device $mnt || return 1
+
+ set_default_debug_nodes $client
- return 0
+ return 0
}
zconf_umount() {
# mount clients if not mouted
zconf_mount_clients() {
- local clients=$1
- local mnt=$2
- local opts=${3:-$MOUNT_OPTS}
- opts=${opts:+-o $opts}
- local flags=${4:-$MOUNT_FLAGS}
-
- local device=$MGSNID:/$FSNAME
- if [ -z "$mnt" -o -z "$FSNAME" ]; then
- echo Bad zconf mount command: opt=$flags $opts dev=$device mnt=$mnt
- exit 1
- fi
-
- echo "Starting client $clients: $flags $opts $device $mnt"
-
- do_nodes $clients "
+ local clients=$1
+ local mnt=$2
+ local opts=${3:-$MOUNT_OPTS}
+ opts=${opts:+-o $opts}
+ local flags=${4:-$MOUNT_FLAGS}
+
+ local device=$MGSNID:/$FSNAME$FILESET
+ if [ -z "$mnt" -o -z "$FSNAME" ]; then
+ echo "Bad conf mount command: opt=$flags $opts dev=$device " \
+ "mnt=$mnt"
+ exit 1
+ fi
+
+ echo "Starting client $clients: $flags $opts $device $mnt"
+ if [ -n "$FILESET" -a ! -n "$SKIP_FILESET" ]; then
+ do_nodes $clients "! grep -q $mnt' ' /proc/mounts ||
+ umount $mnt"
+ do_nodes $clients $MOUNT_CMD $flags $opts $MGSNID:/$FSNAME \
+ $mnt || return 1
+ #disable FILESET if not supported
+ do_nodes $clients lctl get_param -n \
+ mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
+ device=$MGSNID:/$FSNAME
+ do_nodes $clients mkdir -p $mnt/$FILESET
+ do_nodes $clients "! grep -q $mnt' ' /proc/mounts ||
+ umount $mnt"
+ fi
+
+ do_nodes $clients "
running=\\\$(mount | grep -c $mnt' ');
rc=0;
if [ \\\$running -eq 0 ] ; then
fi;
exit \\\$rc" || return ${PIPESTATUS[0]}
- echo "Started clients $clients: "
- do_nodes $clients "mount | grep $mnt' '"
+ echo "Started clients $clients: "
+ do_nodes $clients "mount | grep $mnt' '"
- set_default_debug_nodes $clients
+ set_default_debug_nodes $clients
- return 0
+ return 0
}
zconf_umount_clients() {
}
check_and_setup_lustre() {
- nfs_client_mode && return
+ sanitize_parameters
+ nfs_client_mode && return
cifs_client_mode && return
- local MOUNTED=$(mounted_lustre_filesystems)
+ local MOUNTED=$(mounted_lustre_filesystems)
- local do_check=true
+ local do_check=true
# 1.
# both MOUNT and MOUNT2 are not mounted
if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
# prints bash call stack
print_stack_trace() {
+ local skip=${1:-1}
echo " Trace dump:"
- for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
- local s=${BASH_SOURCE[$i]}
- local l=${BASH_LINENO[$i-1]}
- local f=${FUNCNAME[$i]}
- echo " = $s:$l:$f()"
+ for (( i=$skip; i < ${#BASH_LINENO[*]} ; i++ )) ; do
+ local src=${BASH_SOURCE[$i]}
+ local lineno=${BASH_LINENO[$i-1]}
+ local funcname=${FUNCNAME[$i]}
+ echo " = $src:$lineno:$funcname()"
done
}
-##################################
-# Test interface
-##################################
-
-error_noexit() {
+report_error() {
local TYPE=${TYPE:-"FAIL"}
local dump=true
dump=false
fi
-
log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
- print_stack_trace >&2
-
+ (print_stack_trace 2) >&2
mkdir -p $LOGDIR
# We need to dump the logs on all nodes
if $dump; then
reset_fail_loc
}
+##################################
+# Test interface
+##################################
+
+error_noexit() {
+ report_error "$@"
+}
+
exit_status () {
local status=0
local log=$TESTSUITELOG
}
error() {
- error_noexit "$@"
+ report_error "$@"
exit 1
}
error_exit() {
- error "$@"
+ report_error "$@"
+ exit 1
}
# use only if we are ignoring failures for this test, bugno required.
error_ignore() {
local TYPE="IGNORE ($1)"
shift
- error_noexit "$@"
+ report_error "$@"
}
error_and_remount() {
- error_noexit "$@"
+ report_error "$@"
remount_client $MOUNT
exit 1
}
log "$msg== $(date +"%H:%M:%S (%s)")"
}
+check_dmesg_for_errors() {
+ local res
+ local errors="VFS: Busy inodes after unmount of\|\
+ldiskfs_check_descriptors: Checksum for group 0 failed\|\
+group descriptors corrupted"
+
+ res=$(do_nodes $(comma_list $(nodes_list)) "dmesg" | grep "$errors")
+ [ -z "$res" ] && return 0
+ echo "Kernel error detected: $res"
+ return 1
+}
+
#
# Run a single test function and cleanup after it.
#
local SAVE_UMASK=`umask`
umask 0022
+ if ! grep -q $DIR /proc/mounts; then
+ $SETUP
+ fi
+
banner "test $testnum: $message"
test_${testnum} || error "test_$testnum failed with $?"
cd $SAVE_PWD
reset_fail_loc
check_grant ${testnum} || error "check_grant $testnum failed with $?"
check_catastrophe || error "LBUG/LASSERT detected"
+ check_dmesg_for_errors || error "Error in dmesg detected"
if [ "$PARALLEL" != "yes" ]; then
ps auxww | grep -v grep | grep -q multiop &&
error "multiop still running"
unset tdir
unset tfile
umask $SAVE_UMASK
+ $CLEANUP
return 0
}
}
add_pool_to_list () {
- local fsname=${1%%.*}
- local poolname=${1##$fsname.}
+ local fsname=${1%%.*}
+ local poolname=${1##$fsname.}
- local listvar=${fsname}_CREATED_POOLS
- eval export ${listvar}=$(expand_list ${!listvar} $poolname)
+ local listvar=${fsname}_CREATED_POOLS
+ local temp=${listvar}=$(expand_list ${!listvar} $poolname)
+ eval export $temp
}
remove_pool_from_list () {
- local fsname=${1%%.*}
- local poolname=${1##$fsname.}
+ local fsname=${1%%.*}
+ local poolname=${1##$fsname.}
- local listvar=${fsname}_CREATED_POOLS
- eval export ${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
+ local listvar=${fsname}_CREATED_POOLS
+ local temp=${listvar}=$(exclude_items_from_list ${!listvar} $poolname)
+ eval export $temp
}
destroy_pool_int() {
git://git.whamcloud.com / fs / lustre-release.git / blobdiff