load_module ../ldiskfs/ldiskfs
load_module osd-ldiskfs/osd_ldiskfs
fi
+ load_module nodemap/nodemap
load_module mgs/mgs
load_module mdd/mdd
load_module mdt/mdt
}
cleanup_mount () {
- local clients=${CLIENTS:-$HOSTNAME}
- local mntpt=$1
+ local clients=${CLIENTS:-$HOSTNAME}
+ local mntpt=$1
- zconf_umount_clients $clients $mntpt
+ zconf_umount_clients $clients $mntpt
}
cleanup_and_setup_lustre() {
if [ "$type" == ost ]; then
devs=$(get_osd_param $node "" mntdev)
else
- devs=$(do_node $node \
- "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
+ devs=$(do_node $node $LCTL get_param -n osd-*.$FSNAME-M*.mntdev)
fi
for dev in $devs; do
case $dev in
# Get all of the server target devices.
get_svr_devs() {
- local i
+ local node
+ local i
- # MDT device
- MDTDEV=$(get_mnt_devs $(mdts_nodes) mdt)
+ # Master MDS parameters used by lfsck
+ MDTNODE=$(facet_active_host $SINGLEMDS)
+ MDTDEV=$(echo $(get_mnt_devs $MDTNODE mdt) | awk '{print $1}')
- # OST devices
- i=0
- for node in $(osts_nodes); do
- OSTDEVS[i]=$(get_mnt_devs $node ost)
- i=$((i + 1))
- done
+ # MDT devices
+ i=0
+ for node in $(mdts_nodes); do
+ MDTDEVS[i]=$(get_mnt_devs $node mdt)
+ i=$((i + 1))
+ done
+
+ # OST devices
+ i=0
+ for node in $(osts_nodes); do
+ OSTDEVS[i]=$(get_mnt_devs $node ost)
+ i=$((i + 1))
+ done
}
# Run e2fsck on MDT or OST device.
run_e2fsck() {
- local node=$1
- local target_dev=$2
- local extra_opts=$3
+ local node=$1
+ local target_dev=$2
+ local extra_opts=$3
+ local cmd="$E2FSCK -d -v -t -t -f $extra_opts $target_dev"
+ local log=$TMP/e2fsck.log
+ local rc=0
- df > /dev/null # update statfs data on disk
- local cmd="$E2FSCK -d -v -t -t -f $extra_opts $target_dev"
- echo $cmd
- local rc=0
- do_node $node $cmd || rc=$?
- [ $rc -le $FSCK_MAX_ERR ] || \
- error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
- return 0
+ echo $cmd
+ do_node $node $cmd 2>&1 | tee $log
+ rc=${PIPESTATUS[0]}
+ if [ -n "$(grep "DNE mode isn't supported" $log)" ]; then
+ rm -f $log
+ if [ $MDSCOUNT -gt 1 ]; then
+ skip "DNE mode isn't supported!"
+ cleanupall
+ exit_status
+ else
+ error "It's not DNE mode."
+ fi
+ fi
+ rm -f $log
+
+ [ $rc -le $FSCK_MAX_ERR ] ||
+ error "$cmd returned $rc, should be <= $FSCK_MAX_ERR"
+
+ return 0
}
#
# Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
generate_db() {
- local i
- local ostidx
- local dev
+ local i
+ local ostidx
+ local dev
+ local node
[[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
{ skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
- check_shared_dir $SHARED_DIRECTORY ||
- error "$SHARED_DIRECTORY isn't a shared directory"
+ check_shared_dir $SHARED_DIRECTORY ||
+ error "$SHARED_DIRECTORY isn't a shared directory"
- export MDSDB=$SHARED_DIRECTORY/mdsdb
- export OSTDB=$SHARED_DIRECTORY/ostdb
+ export MDSDB=$SHARED_DIRECTORY/mdsdb
+ export OSTDB=$SHARED_DIRECTORY/ostdb
- [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
-
- run_e2fsck $(mdts_nodes) $MDTDEV "-n --mdsdb $MDSDB"
+ # DNE is not supported, so when running e2fsck on a DNE filesystem,
+ # we only pass master MDS parameters.
+ run_e2fsck $MDTNODE $MDTDEV "-n --mdsdb $MDSDB"
i=0
ostidx=0
fi
#Run lfsck
echo $cmd
- do_node $node $cmd || rc=$?
+ do_node $client $cmd || rc=$?
#Umount if necessary
if ! $mounted; then
zconf_umount $client $MOUNT ||
build_test_filter() {
EXCEPT="$EXCEPT $(testslist_filter)"
- [ "$ONLY" ] && log "only running test `echo $ONLY`"
- for O in $ONLY; do
- eval ONLY_${O}=true
- done
+ for O in $ONLY; do
+ if [[ $O = [0-9]*-[0-9]* ]]; then
+ for num in $(seq $(echo $O | tr '-' ' ')); do
+ eval ONLY_$num=true
+ done
+ else
+ eval ONLY_${O}=true
+ fi
+ done
+
[ "$EXCEPT$ALWAYS_EXCEPT" ] && \
log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
[ "$EXCEPT_SLOW" ] && \
}
#
-# Run a single test function and cleanup after it.
+# Run a single test function and cleanup after it.
#
# This function should be run in a subshell so the test func can
# exit() without stopping the whole script.
#
run_one() {
- local testnum=$1
- local message=$2
- tfile=f.${TESTSUITE}.${testnum}
- export tdir=d0.${TESTSUITE}/d${base}
- export TESTNAME=test_$testnum
- local SAVE_UMASK=`umask`
- umask 0022
-
- banner "test $testnum: $message"
- test_${testnum} || error "test_$testnum failed with $?"
- cd $SAVE_PWD
- reset_fail_loc
- check_grant ${testnum} || error "check_grant $testnum failed with $?"
- check_catastrophe || error "LBUG/LASSERT detected"
+ local testnum=$1
+ local message=$2
+ export tfile=f${testnum}.${TESTSUITE}
+ export tdir=d${testnum}.${TESTSUITE}
+ export TESTNAME=test_$testnum
+ local SAVE_UMASK=`umask`
+ umask 0022
+
+ banner "test $testnum: $message"
+ test_${testnum} || error "test_$testnum failed with $?"
+ cd $SAVE_PWD
+ reset_fail_loc
+ check_grant ${testnum} || error "check_grant $testnum failed with $?"
+ check_catastrophe || error "LBUG/LASSERT detected"
if [ "$PARALLEL" != "yes" ]; then
ps auxww | grep -v grep | grep -q multiop &&
error "multiop still running"
fi
- unset TESTNAME
- unset tdir
- umask $SAVE_UMASK
- return 0
+ unset TESTNAME
+ unset tdir
+ unset tfile
+ umask $SAVE_UMASK
+ return 0
}
#
fi
log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
+ if [[ "$TEST_STATUS" != "SKIP" ]] && [[ -f $TF_SKIP ]]; then
+ rm -f $TF_SKIP
+ fi
+
if [ -f $LOGDIR/err ]; then
$FAIL_ON_ERROR && exit $RC
fi
}
_wait_osc_import_state() {
- local facet=$1
- local ost_facet=$2
- local expected=$3
- local ost=$(get_osc_import_name $facet $ost_facet)
-
+ local facet=$1
+ local ost_facet=$2
+ local expected=$3
+ local ost=$(get_osc_import_name $facet $ost_facet)
local param="osc.${ost}.ost_server_uuid"
+ local params=$param
local i=0
- # 1. wait the deadline of client 1st request (it could be skipped)
- # 2. wait the deadline of client 2nd request
- local maxtime=$(( 2 * $(request_timeout $facet)))
-
- #During setup time, the osc might not be setup, it need wait
- #until list_param can return valid value. And also if there
- #are mulitple osc entries we should list all of them before
- #go to wait.
- local params=$($LCTL list_param $param 2>/dev/null || true)
- while [ -z "$params" ]; do
- if [ $i -ge $maxtime ]; then
- echo "can't get $param by list_param in $maxtime secs"
- if [[ $facet != client* ]]; then
- echo "Go with $param directly"
- params=$param
- break
- else
+ # 1. wait the deadline of client 1st request (it could be skipped)
+ # 2. wait the deadline of client 2nd request
+ local maxtime=$(( 2 * $(request_timeout $facet)))
+
+ if [[ $facet == client* ]]; then
+ # During setup time, the osc might not be setup, it need wait
+ # until list_param can return valid value. And also if there
+ # are mulitple osc entries we should list all of them before
+ # go to wait.
+ params=$($LCTL list_param $param 2>/dev/null || true)
+ while [ -z "$params" ]; do
+ if [ $i -ge $maxtime ]; then
+ echo "can't get $param in $maxtime secs"
return 1
fi
- fi
- sleep 1
- i=$((i + 1))
- params=$($LCTL list_param $param 2>/dev/null || true)
- done
-
+ sleep 1
+ i=$((i + 1))
+ params=$($LCTL list_param $param 2>/dev/null || true)
+ done
+ fi
if ! do_rpc_nodes "$(facet_active_host $facet)" \
wait_import_state $expected "$params" $maxtime; then
error "import is not in ${expected} state"
git://git.whamcloud.com / fs / lustre-release.git / blobdiff