[ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
MODPROBECONF=/etc/modprobe.conf
+sanitize_parameters() {
+ for i in DIR DIR1 DIR2 MOUNT MOUNT1 MOUNT2
+ do
+ local path=${!i}
+ if [ -d "$path" ]; then
+ eval export $i=$(echo $path | sed -r 's/\/+$//g')
+ fi
+ done
+}
assert_DIR () {
- local failed=""
- [[ $DIR/ = $MOUNT/* ]] || \
- { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
- [[ $DIR1/ = $MOUNT1/* ]] || \
- { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
- [[ $DIR2/ = $MOUNT2/* ]] || \
- { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
+ local failed=""
+ [[ $DIR/ = $MOUNT/* ]] ||
+ { failed=1 && echo "DIR=$DIR not in $MOUNT. Aborting."; }
+ [[ $DIR1/ = $MOUNT1/* ]] ||
+ { failed=1 && echo "DIR1=$DIR1 not in $MOUNT1. Aborting."; }
+ [[ $DIR2/ = $MOUNT2/* ]] ||
+ { failed=1 && echo "DIR2=$DIR2 not in $MOUNT2. Aborting"; }
- [ -n "$failed" ] && exit 99 || true
+ [ -n "$failed" ] && exit 99 || true
}
usage() {
export SHUTDOWN_ATTEMPTS=${SHUTDOWN_ATTEMPTS:-3}
export OSD_TRACK_DECLARES_LBUG=${OSD_TRACK_DECLARES_LBUG:-"yes"}
- # command line
+ # command line
- while getopts "rvwf:" opt $*; do
- case $opt in
- f) CONFIG=$OPTARG;;
- r) REFORMAT=--reformat;;
- v) VERBOSE=true;;
- w) WRITECONF=writeconf;;
- \?) usage;;
- esac
- done
+ while getopts "rvwf:" opt $*; do
+ case $opt in
+ f) CONFIG=$OPTARG;;
+ r) REFORMAT=yes;;
+ v) VERBOSE=true;;
+ w) WRITECONF=writeconf;;
+ \?) usage;;
+ esac
+ done
- shift $((OPTIND - 1))
- ONLY=${ONLY:-$*}
+ shift $((OPTIND - 1))
+ ONLY=${ONLY:-$*}
# print the durations of each test if "true"
DDETAILS=${DDETAILS:-false}
load_module lov/lov
load_module mgc/mgc
load_module obdecho/obdecho
- if ! client_only; then
- SYMLIST=/proc/kallsyms
- grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
- grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
- grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
+ if ! client_only; then
+ SYMLIST=/proc/kallsyms
+ grep -q crc16 $SYMLIST ||
+ { modprobe crc16 2>/dev/null || true; }
+ grep -q -w jbd2 $SYMLIST ||
+ { modprobe jbd2 2>/dev/null || true; }
load_module lfsck/lfsck
- [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
+ [ "$LQUOTA" != "no" ] &&
+ load_module quota/lquota $LQUOTAOPTS
if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
modprobe zfs
load_module osd-zfs/osd_zfs
if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
grep -q exportfs_decode_fh $SYMLIST ||
{ modprobe exportfs 2> /dev/null || true; }
+ grep -q -w mbcache $SYMLIST ||
+ { modprobe mbcache 2>/dev/null || true; }
load_module ../ldiskfs/ldiskfs
load_module osd-ldiskfs/osd_ldiskfs
fi
load_module osp/osp
load_module ofd/ofd
load_module osp/osp
- fi
+ fi
load_module llite/lustre
llite_lloop_enabled && load_module llite/llite_lloop
facet_number() {
local facet=$1
- if [ $facet == mgs ]; then
+ if [ $facet == mgs ] || [ $facet == client ]; then
return 1
fi
return $RC
fi
+ health=$(do_facet ${facet} "$LCTL get_param -n health_check")
+ if [[ "$health" != "healthy" ]]; then
+ error "$facet is in a unhealthy state"
+ fi
+
set_default_debug_facet $facet
if [[ $facet == mds* ]]; then
# inside fail() and fail_abort().
#
do_facet $facet $LCTL --device ${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ do_facet $facet $LCTL mark "$HOSTNAME: $facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "$HOSTNAME: local REPLAY BARRIER on ${!svc}"
}
replay_barrier_nodf() {
echo Replay barrier on ${!svc}
do_facet $facet $LCTL --device ${!svc} notransno
do_facet $facet $LCTL --device ${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ do_facet $facet $LCTL mark "$HOSTNAME: $facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "$HOSTNAME: local REPLAY BARRIER on ${!svc}"
}
replay_barrier_nosync() {
echo Replay barrier on ${!svc}
do_facet $facet $LCTL --device ${!svc} notransno
do_facet $facet $LCTL --device ${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ do_facet $facet $LCTL mark "$HOSTNAME: $facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "$HOSTNAME: local REPLAY BARRIER on ${!svc}"
}
#
}
do_node() {
- local verbose=false
- # do not stripe off hostname if verbose, bug 19215
- if [ x$1 = x--verbose ]; then
- shift
- verbose=true
- fi
+ local verbose=false
+ # do not stripe off hostname if verbose, bug 19215
+ if [ x$1 = x--verbose ]; then
+ shift
+ verbose=true
+ fi
- local HOST=$1
- shift
- local myPDSH=$PDSH
- if [ "$HOST" = "$HOSTNAME" ]; then
- myPDSH="no_dsh"
- elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
- echo "cannot run remote command on $HOST with $myPDSH"
- return 128
- fi
- if $VERBOSE; then
- echo "CMD: $HOST $@" >&2
- $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
- fi
+ local HOST=$1
+ shift
+ local myPDSH=$PDSH
+ if [ "$HOST" = "$HOSTNAME" ]; then
+ myPDSH="no_dsh"
+ elif [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" ]; then
+ echo "cannot run remote command on $HOST with $myPDSH"
+ return 128
+ fi
+ if $VERBOSE; then
+ echo "CMD: $HOST $@" >&2
+ $myPDSH $HOST "$LCTL mark \"$HOSTNAME: $@\"" &>/dev/null || :
+ fi
if [ "$myPDSH" = "rsh" ]; then
# we need this because rsh does not return exit code of an executed command
return $?
fi
- # This is part from do_node
- local myPDSH=$PDSH
+ # This is part from do_node
+ local myPDSH=$PDSH
- [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
- echo "cannot run remote command on $rnodes with $myPDSH" && return 128
+ [ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] &&
+ echo "cannot run remote command on $rnodes with $myPDSH" &&
+ return 128
- export FANOUT=$(get_node_count "${rnodes//,/ }")
- if $VERBOSE; then
- echo "CMD: $rnodes $@" >&2
- $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
- fi
+ export FANOUT=$(get_node_count "${rnodes//,/ }")
+ if $VERBOSE; then
+ echo "CMD: $rnodes $@" >&2
+ $myPDSH $rnodes "$LCTL mark \"$HOSTNAME: $@\"" &>/dev/null || :
+ fi
# do not replace anything from pdsh output if -N is used
# -N Disable hostname: prefix on lines of output.
}
check_and_setup_lustre() {
- nfs_client_mode && return
+ sanitize_parameters
+ nfs_client_mode && return
cifs_client_mode && return
- local MOUNTED=$(mounted_lustre_filesystems)
-
- local do_check=true
- # 1.
- # both MOUNT and MOUNT2 are not mounted
- if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
- [ "$REFORMAT" ] && formatall
- # setupall mounts both MOUNT and MOUNT2 (if MOUNT_2 is set)
- setupall
- is_mounted $MOUNT || error "NAME=$NAME not mounted"
- export I_MOUNTED=yes
- do_check=false
+ local MOUNTED=$(mounted_lustre_filesystems)
+
+ local do_check=true
+ # 1.
+ # both MOUNT and MOUNT2 are not mounted
+ if ! is_mounted $MOUNT && ! is_mounted $MOUNT2; then
+ [ "$REFORMAT" = "yes" ] && formatall
+ # setupall mounts both MOUNT and MOUNT2 (if MOUNT_2 is set)
+ setupall
+ is_mounted $MOUNT || error "NAME=$NAME not mounted"
+ export I_MOUNTED=yes
+ do_check=false
# 2.
# MOUNT2 is mounted
elif is_mounted $MOUNT2; then
}
cancel_lru_locks() {
- #$LCTL mark "cancel_lru_locks $1 start"
+ #$LCTL mark "$HOSTNAME: cancel_lru_locks $1 start"
$LCTL set_param -n ldlm.namespaces.*$1*.lru_size=clear
$LCTL get_param ldlm.namespaces.*$1*.lock_unused_count | grep -v '=0'
- #$LCTL mark "cancel_lru_locks $1 stop"
+ #$LCTL mark "$HOSTNAME: cancel_lru_locks $1 stop"
}
default_lru_size()
# prints bash call stack
print_stack_trace() {
+ local skip=${1:-1}
echo " Trace dump:"
- for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
- local s=${BASH_SOURCE[$i]}
- local l=${BASH_LINENO[$i-1]}
- local f=${FUNCNAME[$i]}
- echo " = $s:$l:$f()"
+ for (( i=$skip; i < ${#BASH_LINENO[*]} ; i++ )) ; do
+ local src=${BASH_SOURCE[$i]}
+ local lineno=${BASH_LINENO[$i-1]}
+ local funcname=${FUNCNAME[$i]}
+ echo " = $src:$lineno:$funcname()"
done
}
-##################################
-# Test interface
-##################################
-
-error_noexit() {
+report_error() {
local TYPE=${TYPE:-"FAIL"}
local dump=true
dump=false
fi
-
log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
- print_stack_trace >&2
-
+ (print_stack_trace 2) >&2
mkdir -p $LOGDIR
# We need to dump the logs on all nodes
if $dump; then
reset_fail_loc
}
+##################################
+# Test interface
+##################################
+
+error_noexit() {
+ report_error "$@"
+}
+
exit_status () {
local status=0
local log=$TESTSUITELOG
}
error() {
- error_noexit "$@"
+ report_error "$@"
exit 1
}
error_exit() {
- error "$@"
+ report_error "$@"
+ exit 1
}
# use only if we are ignoring failures for this test, bugno required.
error_ignore() {
local TYPE="IGNORE ($1)"
shift
- error_noexit "$@"
+ report_error "$@"
}
error_and_remount() {
- error_noexit "$@"
+ report_error "$@"
remount_client $MOUNT
exit 1
}
echo "$*" >&2
load_module ../libcfs/libcfs/libcfs
- local MSG="$*"
- # Get rid of '
- MSG=${MSG//\'/\\\'}
- MSG=${MSG//\(/\\\(}
- MSG=${MSG//\)/\\\)}
- MSG=${MSG//\;/\\\;}
- MSG=${MSG//\|/\\\|}
- MSG=${MSG//\>/\\\>}
- MSG=${MSG//\</\\\<}
- MSG=${MSG//\//\\\/}
- do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
+ local MSG="$HOSTNAME: $*"
+ # Get rid of '
+ MSG=${MSG//\'/\\\'}
+ MSG=${MSG//\(/\\\(}
+ MSG=${MSG//\)/\\\)}
+ MSG=${MSG//\;/\\\;}
+ MSG=${MSG//\|/\\\|}
+ MSG=${MSG//\>/\\\>}
+ MSG=${MSG//\</\\\<}
+ MSG=${MSG//\//\\\/}
+ do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null ||
+ true
}
trace() {
}
client_only () {
- [ "$CLIENTONLY" ] || [ "$CLIENTMODSONLY" = yes ]
-}
-
-is_patchless ()
-{
- lctl get_param version | grep -q patchless
+ [ "$CLIENTONLY" ] || [ "$CLIENTMODSONLY" = yes ]
}
check_versions () {
git://git.whamcloud.com / fs / lustre-release.git / blobdiff