export ZFS=${ZFS:-zfs}
export ZPOOL=${ZPOOL:-zpool}
export ZDB=${ZDB:-zdb}
+ export PARTPROBE=${PARTPROBE:-partprobe}
#[ -d /r ] && export ROOT=${ROOT:-/r}
export TMP=${TMP:-$ROOT/tmp}
grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
+ load_module lfsck/lfsck
[ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
modprobe zfs
local size=0
case $fstype in
ldiskfs) size=50;; # largest seen is 44, leave some headroom
- zfs) size=256;;
+ zfs) size=400;; # largest seen is 384
esac
echo -n $size
}
#
+# Get the device of a facet.
+#
+facet_device() {
+ local facet=$1
+ local device
+
+ case $facet in
+ mgs) device=$(mgsdevname) ;;
+ mds*) device=$(mdsdevname $(facet_number $facet)) ;;
+ ost*) device=$(ostdevname $(facet_number $facet)) ;;
+ fs2mds) device=$(mdsdevname 1_2) ;;
+ fs2ost) device=$(ostdevname 1_2) ;;
+ fs3ost) device=$(ostdevname 2_2) ;;
+ *) ;;
+ esac
+
+ echo -n $device
+}
+
+#
+# Get the virtual device of a facet.
+#
+facet_vdevice() {
+ local facet=$1
+ local device
+
+ case $facet in
+ mgs) device=$(mgsvdevname) ;;
+ mds*) device=$(mdsvdevname $(facet_number $facet)) ;;
+ ost*) device=$(ostvdevname $(facet_number $facet)) ;;
+ fs2mds) device=$(mdsvdevname 1_2) ;;
+ fs2ost) device=$(ostvdevname 1_2) ;;
+ fs3ost) device=$(ostvdevname 2_2) ;;
+ *) ;;
+ esac
+
+ echo -n $device
+}
+
+#
+# Re-read the partition table on failover partner host.
+# After a ZFS storage pool is created on a shared device, the partition table
+# on the device may change. However, the operating system on the failover
+# host may not notice the change automatically. Without the up-to-date partition
+# block devices, 'zpool import ..' cannot find the labels, whose positions are
+# relative to partition rather than disk beginnings.
+#
+# This function performs partprobe on the failover host to make it re-read the
+# partition table.
+#
+refresh_partition_table() {
+ local facet=$1
+ local device=$2
+ local host
+
+ host=$(facet_passive_host $facet)
+ if [[ -n "$host" ]]; then
+ do_node $host "$PARTPROBE $device"
+ fi
+}
+
+#
+# Get ZFS storage pool name.
+#
+zpool_name() {
+ local facet=$1
+ local device
+ local poolname
+
+ device=$(facet_device $facet)
+ # poolname is string before "/"
+ poolname="${device%%/*}"
+
+ echo -n $poolname
+}
+
+#
+# Export ZFS storage pool.
+# Before exporting the pool, all datasets within the pool should be unmounted.
+#
+export_zpool() {
+ local facet=$1
+ shift
+ local opts="$@"
+ local poolname
+
+ poolname=$(zpool_name $facet)
+
+ if [[ -n "$poolname" ]]; then
+ do_facet $facet "! $ZPOOL list -H $poolname >/dev/null 2>&1 ||
+ grep -q ^$poolname/ /proc/mounts ||
+ $ZPOOL export $opts $poolname"
+ fi
+}
+
+#
+# Import ZFS storage pool.
+# Force importing, even if the pool appears to be potentially active.
+#
+import_zpool() {
+ local facet=$1
+ shift
+ local opts=${@:-"-o cachefile=none"}
+ local poolname
+
+ poolname=$(zpool_name $facet)
+
+ if [[ -n "$poolname" ]]; then
+ opts+=" -d $(dirname $(facet_vdevice $facet))"
+ do_facet $facet "$ZPOOL list -H $poolname >/dev/null 2>&1 ||
+ $ZPOOL import -f $opts $poolname"
+ fi
+}
+
+#
+# Set the "cachefile=none" property on ZFS storage pool so that the pool
+# is not automatically imported on system startup.
+#
+# In a failover environment, this will provide resource level fencing which
+# will ensure that the same ZFS storage pool will not be imported concurrently
+# on different nodes.
+#
+disable_zpool_cache() {
+ local facet=$1
+ local poolname
+
+ poolname=$(zpool_name $facet)
+
+ if [[ -n "$poolname" ]]; then
+ do_facet $facet "$ZPOOL set cachefile=none $poolname"
+ fi
+}
+
+#
# This and set_osd_param() shall be used to access OSD parameters
# once existed under "obdfilter":
#
opts=$(csa_add "$opts" -o loop)
fi
+ if [[ $(facet_fstype $facet) == zfs ]]; then
+ # import ZFS storage pool
+ import_zpool $facet || return ${PIPESTATUS[0]}
+ fi
+
echo "Starting ${facet}: $opts ${!dev} $mntpt"
# for testing LU-482 error handling in mount_facets() and test_0a()
if [ -f $TMP/test-lu482-trigger ]; then
return $RC
}
-#
-# When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
-# Because stopping corresponding target may not clear this in-memory state, we
-# need to zap the pool from memory by exporting and reimporting the pool.
-#
-# Although the uberblocks are not updated when a pool is freezed, transactions
-# are still written to the disks. Modified blocks may be cached in memory when
-# tests try reading them back. The export-and-reimport process also evicts any
-# cached pool data from memory to provide the correct "data loss" semantics.
-#
-refresh_disk() {
- local facet=$1
- local fstype=$(facet_fstype $facet)
- local _dev
- local dev
- local poolname
-
- if [ "${fstype}" == "zfs" ]; then
- _dev=$(facet_active $facet)_dev
- dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
- poolname="${dev%%/*}" # poolname is string before "/"
-
- if [ "${poolname}" == "" ]; then
- echo "invalid dataset name: $dev"
- return
- fi
- do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
- do_facet $facet "$ZPOOL export ${poolname}"
- do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
- ${poolname}"
- fi
-}
-
stop() {
local running
local facet=$1
do_facet ${facet} umount -d $@ $mntpt
fi
- # umount should block, but we should wait for unrelated obd's
- # like the MGS or MGC to also stop.
- wait_exit_ST ${facet}
+ # umount should block, but we should wait for unrelated obd's
+ # like the MGS or MGC to also stop.
+ wait_exit_ST ${facet} || return ${PIPESTATUS[0]}
+
+ if [[ $(facet_fstype $facet) == zfs ]]; then
+ # export ZFS storage pool
+ export_zpool $facet
+ fi
}
# save quota version (both administrative and operational quotas)
if [ "$FAILURE_MODE" = HARD ]; then
reboot_node $(facet_active_host $facet)
else
- refresh_disk ${facet}
sleep 10
fi
}
do_facet $facet "sync; sync; sync"
df $MOUNT
- # make sure there will be no seq change
+ # make sure there will be no seq change
local clients=${CLIENTS:-$HOSTNAME}
local f=fsa-\\\$\(hostname\)
do_nodes $clients "mcreate $MOUNT/$f; rm $MOUNT/$f"
local svc=${facet}_svc
do_facet $facet $LCTL --device ${!svc} notransno
+ #
+ # If a ZFS OSD is made read-only here, its pool is "freezed". This
+ # in-memory state has to be cleared by either rebooting the host or
+ # exporting and reimporting the pool.
+ #
+ # Although the uberblocks are not updated when a pool is freezed,
+ # transactions are still written to the disks. Modified blocks may be
+ # cached in memory when tests try reading them back. The
+ # export-and-reimport process also evicts any cached pool data from
+ # memory to provide the correct "data loss" semantics.
+ #
+ # In the test framework, the exporting and importing operations are
+ # handled by stop() and mount_facet() separately, which are used
+ # inside fail() and fail_abort().
+ #
do_facet $facet $LCTL --device ${!svc} readonly
do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
$LCTL mark "local REPLAY BARRIER on ${!svc}"
fail_abort() {
local facet=$1
stop $facet
- refresh_disk ${facet}
change_active $facet
wait_for_facet $facet
mount_facet $facet -o abort_recovery
}
add() {
- local facet=$1
- shift
- # make sure its not already running
- stop ${facet} -f
- rm -f $TMP/${facet}active
- [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
- do_facet ${facet} $MKFS $*
+ local facet=$1
+ shift
+ # make sure its not already running
+ stop ${facet} -f
+ rm -f $TMP/${facet}active
+ [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
+ do_facet ${facet} $MKFS $* || return ${PIPESTATUS[0]}
+
+ if [[ $(facet_fstype $facet) == zfs ]]; then
+ #
+ # After formatting a ZFS target, "cachefile=none" property will
+ # be set on the ZFS storage pool so that the pool is not
+ # automatically imported on system startup. And then the pool
+ # will be exported so as to leave the importing and exporting
+ # operations handled by mount_facet() and stop() separately.
+ #
+ refresh_partition_table $facet $(facet_vdevice $facet)
+ disable_zpool_cache $facet
+ export_zpool $facet
+ fi
}
ostdevname() {
# empty lustre filesystem may have empty directories lost+found and .lustre
is_empty_fs() {
+ # exclude .lustre & lost+found
[ $(find $1 -maxdepth 1 -name lost+found -o -name .lustre -prune -o \
-print | wc -l) = 1 ] || return 1
[ ! -d $1/lost+found ] || is_empty_dir $1/lost+found || return 1
- [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre || return 1
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.0) ]; then
+ # exclude .lustre/fid (LU-2780)
+ [ $(find $1/.lustre -maxdepth 1 -name fid -prune -o \
+ -print | wc -l) = 1 ] || return 1
+ else
+ [ ! -d $1/.lustre ] || is_empty_dir $1/.lustre || return 1
+ fi
return 0
}
if [ $(lower $OSD_TRACK_DECLARES_LBUG) == 'yes' ] ; then
local facets="$(get_facets OST),$(get_facets MDS),mgs"
- local facet
- local nodes
- local node
- for facet in ${facets//,/ }; do
- if [ $(facet_fstype $node) == "ldiskfs" ] ; then
- node=$(facet_host ${facet})
- nodes="$nodes $node"
- fi
- done
+ local nodes="$(facets_hosts ${facets})"
if [ -n "$nodes" ] ; then
- nodes=$(for i in $nodes; do echo $i; done | sort -u)
- do_nodes $(comma_list $nodes) "$LCTL set_param \
- osd-ldiskfs.track_declares_assert=1"
+ do_nodes $nodes "$LCTL set_param \
+ osd-ldiskfs.track_declares_assert=1 || true"
fi
fi
#Remove objects from OST
remove_ost_objects() {
- shift
- local ostdev=$1
- local group=$2
- shift 2
+ local facet=$1
+ local ostdev=$2
+ local group=$3
+ shift 3
local objids="$@"
- local facet=ost$((OSTIDX + 1))
local mntpt=$(facet_mntpt $facet)
local opts=$OST_MOUNT_OPTS
local i
local rc
echo "removing objects from $ostdev on $facet: $objids"
- if ! do_facet $facet test -b $ostdev; then
+ if ! test -b $ostdev; then
opts=$(csa_add "$opts" -o loop)
fi
mount -t $(facet_fstype $facet) $opts $ostdev $mntpt ||
return $?
- rc=0;
+ rc=0
for i in $objids; do
rm $mntpt/O/$group/d$((i % 32))/$i || { rc=$?; break; }
done
fi
mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
return $?
- rc=0;
+ rc=0
for f in $files; do
rm $mntpt/ROOT/$f || { rc=$?; break; }
done
echo "$TESTLOG_PREFIX.$TESTNAME.$logname.$(hostname -s).log"
}
-# mkdir directory on different MDTs
+# make directory on different MDTs
test_mkdir() {
local option
local parent
local child
local path
- local dir
local rc=0
- if [ $# -eq 2 ]; then
- option=$1
- path=$2
- else
- path=$1
- fi
-
- child=${path##*/}
- parent=${path%/*}
+ case $# in
+ 1) path=$1;;
+ 2) option=$1
+ path=$2;;
+ *) error "Only creating single directory is supported";;
+ esac
- if [ "$parent" == "$child" ]; then
- parent=$(pwd)
- fi
+ child=$(basename $path)
+ parent=$(dirname $path)
- if [ "$option" == "-p" -a -d ${parent}/${child} ]; then
+ if [ "$option" == "-p" -a -d $parent/$child ]; then
return $rc
fi
- # it needs to check whether there is further / in child
- dir=$(echo $child | awk -F '/' '{print $2}')
- if [ ! -z "$dir" ]; then
- local subparent=$(echo $child | awk -F '/' '{ print $1 }')
- parent=${parent}"/"${subparent}
- child=$dir
- fi
-
if [ ! -d ${parent} ]; then
if [ "$option" == "-p" ]; then
mkdir -p ${parent}
fi
if [ $MDSCOUNT -le 1 ]; then
- mkdir $option ${parent}/${child} || rc=$?
+ mkdir $option $parent/$child || rc=$?
else
local mdt_idx=$($LFS getstripe -M $parent)
+ local test_num=$(echo $testnum | sed -e 's/[^0-9]*//g')
if [ "$mdt_idx" -ne 0 ]; then
- mkdir $option ${parent}/${child} || rc=$?
- return $rc
+ mkdir $option $parent/$child || rc=$?
+ else
+ mdt_idx=$((test_num % MDSCOUNT))
+ echo "mkdir $mdt_idx for $parent/$child"
+ $LFS setdirstripe -i $mdt_idx $parent/$child || rc=$?
fi
-
- local test_num=$(echo $testnum | sed -e 's/[^0-9]*//g')
- local mdt_idx=$((test_num % MDSCOUNT))
- echo "mkdir $mdt_idx for ${parent}/${child}"
- $LFS setdirstripe -i $mdt_idx ${parent}/${child} || rc=$?
fi
return $rc
}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff