LU-13057 tests: sanity-pcc test_1c: Failed to start copytool

[fs/lustre-release.git] / lustre / tests / test-framework.sh

diff --git a/lustre/tests/test-framework.sh b/lustre/tests/test-framework.sh
index 17274af..78004fc 100755 (executable)
--- a/lustre/tests/test-framework.sh
+++ b/lustre/tests/test-framework.sh
@@ -5948,8 +5948,10 @@ lru_resize_disable()
 
 flock_is_enabled()
 {
+       local mountpath=${1:-$MOUNT}
        local RC=0
-       [ -z "$(mount | grep "$MOUNT.*flock" | grep -v noflock)" ] && RC=1
+
+       [ -z "$(mount | grep "$mountpath .*flock" | grep -v noflock)" ] && RC=1
        return $RC
 }
 
@@ -6063,7 +6065,7 @@ report_error() {
 # usage: stack_trap arg sigspec
 #
 # stack_trap() behaves like bash's built-in trap, except that it "stacks" the
-# command ``arg`` on top of previously defined commands for ``sigspec`` instead
+# command "arg" on top of previously defined commands for "sigspec" instead
 # of overwriting them.
 # stacked traps are executed in reverse order of their registration
 #
@@ -6071,7 +6073,7 @@ report_error() {
 stack_trap()
 {
        local arg="$1"
-       local sigspec="$2"
+       local sigspec="${2:-EXIT}"
 
        # Use "trap -p" to get the quoting right
        local old_trap="$(trap -p "$sigspec")"
@@ -6205,7 +6207,7 @@ basetest() {
     if [[ $1 = [a-z]* ]]; then
         echo $1
     else
-        echo ${1%%[a-z]*}
+       echo ${1%%[a-zA-Z]*}
     fi
 }
 
@@ -8473,7 +8475,7 @@ get_block_size() {
 # ldiskfs xattrs over one block in size.  Allow both the historical
 # Lustre feature name (large_xattr) and the upstream name (ea_inode).
 large_xattr_enabled() {
-       [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 0
+       [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 1
 
        local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
 
@@ -8484,20 +8486,7 @@ large_xattr_enabled() {
 
 # Get the maximum xattr size supported by the filesystem.
 max_xattr_size() {
-    local size
-
-    if large_xattr_enabled; then
-       size=$($LCTL get_param -n llite.*.max_easize)
-    else
-        local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
-        local block_size=$(get_block_size $SINGLEMDS $mds_dev)
-
-        # maximum xattr size = size of block - size of header -
-        #                      size of 1 entry - 4 null bytes
-        size=$((block_size - 32 - 32 - 4))
-    fi
-
-    echo $size
+       $LCTL get_param -n llite.*.max_easize
 }
 
 # Dump the value of the named xattr from a file.
@@ -9727,35 +9716,53 @@ is_project_quota_supported() {
                [ $(lustre_version_code $SINGLEMDS) -le \
                        $(version_code 2.10.53) ] && return 1
 
-               do_facet mds1 $ZPOOL upgrade -v |
-                       grep project_quota && return 0
+               do_facet mds1 $ZPOOL get all |
+                       grep -q project_quota && return 0
        fi
 
        return 1
 }
 
+# ZFS project quota enable/disable:
+#   This  feature  will  become  active as soon as it is enabled and will never
+#   return to being disabled. Each filesystem will be upgraded automatically
+#   when remounted or when [a] new file is created under that filesystem. The
+#   upgrade can also be triggered on filesystems via `zfs set version=current
+#   <pool/fs>`. The upgrade process runs in the background and may take a
+#   while to complete for the filesystems containing a large number of files.
 enable_project_quota() {
        is_project_quota_supported || return 0
-       [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] && return 0
+       local zkeeper=${KEEP_ZPOOL}
+       stack_trap "KEEP_ZPOOL=$zkeeper" EXIT
+       KEEP_ZPOOL="true"
        stopall || error "failed to stopall (1)"
 
-       for num in $(seq $MDSCOUNT); do
-               do_facet mds$num $TUNE2FS -O project $(mdsdevname $num) ||
-                       error "tune2fs $(mdsdevname $num) failed"
-       done
+       local zfeat_en="feature@project_quota=enabled"
+       for facet in $(seq -f mds%g $MDSCOUNT) $(seq -f ost%g $OSTCOUNT); do
+               local facet_fstype=${facet:0:3}1_FSTYPE
+               local devname
 
-       for num in $(seq $OSTCOUNT); do
-               do_facet ost$num $TUNE2FS -O project $(ostdevname $num) ||
-                       error "tune2fs $(ostdevname $num) failed"
+               if [ "${!facet_fstype}" = "zfs" ]; then
+                       devname=$(zpool_name ${facet})
+                       do_facet ${facet} $ZPOOL set "$zfeat_en" $devname ||
+                               error "$ZPOOL set $zfeat_en $devname"
+               else
+                       [ ${facet:0:3} == "mds" ] &&
+                               devname=$(mdsdevname ${facet:3}) ||
+                               devname=$(ostdevname ${facet:3})
+                       do_facet ${facet} $TUNE2FS -O project $devname ||
+                               error "tune2fs $devname failed"
+               fi
        done
 
+       KEEP_ZPOOL="${zkeeper}"
        mount
        setupall
 }
 
 disable_project_quota() {
        is_project_quota_supported || return 0
-       [ "$(facet_fstype $SINGLEMDS)" != "ldiskfs" ] && return 0
+       [ "$mds1_FSTYPE" != "ldiskfs" ] && return 0
        stopall || error "failed to stopall (1)"
 
        for num in $(seq $MDSCOUNT); do
@@ -9975,6 +9982,11 @@ copytool()
        local action=$1
        shift
 
+       # Use default values
+       local facet=$SINGLEAGT
+       local mountpoint="${MOUNT2:-$MOUNT}"
+       local hsm_root="${hsm_root:-$(hsm_root "$facet")}"
+
        # Parse arguments
        local fail_on_error=true
        local -a misc_options
@@ -9982,11 +9994,11 @@ copytool()
                case "$1" in
                -f|--facet)
                        shift
-                       local facet="$1"
+                       facet="$1"
                        ;;
                -m|--mountpoint)
                        shift
-                       local mountpoint="$1"
+                       mountpoint="$1"
                        ;;
                -a|--archive-id)
                        shift
@@ -9994,7 +10006,7 @@ copytool()
                        ;;
                -h|--hsm-root)
                        shift
-                       local hsm_root="$1"
+                       hsm_root="$1"
                        ;;
                -b|--bwlimit)
                        shift
@@ -10011,11 +10023,6 @@ copytool()
                shift
        done
 
-       # Use default values if needed
-       local facet=${facet:-$SINGLEAGT}
-       local mountpoint="${mountpoint:-${MOUNT2:-$MOUNT}}"
-       local hsm_root="${hsm_root:-$(hsm_root "$facet")}"
-
        stack_trap "do_facet $facet rm -rf '$hsm_root'" EXIT
        do_facet $facet mkdir -p "$hsm_root" ||
                error "mkdir '$hsm_root' failed"
@@ -10260,8 +10267,8 @@ verify_comp_at_zero() {
                error "No component starting at zero(!)"
 }
 
-#TODO: This version is a placeholder, to be replaced before final commit
-SEL_VER="2.12.52"
+# version after which Self-Extending Layouts are available
+SEL_VER="2.12.55"
 
 sel_layout_sanity() {
        local file=$1