export TEST_FAILED=false
export FAIL_ON_SKIP_ENV=${FAIL_ON_SKIP_ENV:-false}
- export MKE2FS=${MKE2FS:-mke2fs}
- export DEBUGFS=${DEBUGFS:-debugfs}
- export TUNE2FS=${TUNE2FS:-tune2fs}
- export E2LABEL=${E2LABEL:-e2label}
- export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
- export E2FSCK=${E2FSCK:-e2fsck}
- export LFSCK_BIN=${LFSCK_BIN:-lfsck}
+ export MKE2FS=$MKE2FS
+ if [ -z "$MKE2FS" ]; then
+ if which mkfs.ldiskfs >/dev/null 2>&1; then
+ export MKE2FS=mkfs.ldiskfs
+ else
+ export MKE2FS=mke2fs
+ fi
+ fi
+ export DEBUGFS=$DEBUGFS
+ if [ -z "$DEBUGFS" ]; then
+ if which debugfs.ldiskfs >/dev/null 2>&1; then
+ export DEBUGFS=debugfs.ldiskfs
+ else
+ export DEBUGFS=debugfs
+ fi
+ fi
+
+ export TUNE2FS=$TUNE2FS
+ if [ -z "$TUNE2FS" ]; then
+ if which tunefs.ldiskfs >/dev/null 2>&1; then
+ export TUNE2FS=tunefs.ldiskfs
+ else
+ export TUNE2FS=tune2fs
+ fi
+ fi
+
+ export E2LABEL=$E2LABEL
+ if [ -z "$E2LABEL" ]; then
+ if which label.ldiskfs >/dev/null 2>&1; then
+ export E2LABEL=label.ldiskfs
+ else
+ export E2LABEL=e2label
+ fi
+ fi
+
+ export DUMPE2FS=$DUMPE2FS
+ if [ -z "$DUMPE2FS" ]; then
+ if which dumpfs.ldiskfs >/dev/null 2>&1; then
+ export DUMPE2FS=dumpfs.ldiskfs
+ else
+ export DUMPE2FS=dumpe2fs
+ fi
+ fi
+
+ export E2FSCK=$E2FSCK
+ if [ -z "$E2FSCK" ]; then
+ if which fsck.ldiskfs >/dev/null 2>&1; then
+ export E2FSCK=fsck.ldiskfs
+ else
+ export E2FSCK=e2fsck
+ fi
+ fi
+
+ export LFSCK_BIN=${LFSCK_BIN:-lfsck}
export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
export FSCK_MAX_ERR=4 # File system errors left uncorrected
fi
fi
export LL_DECODE_FILTER_FID=${LL_DECODE_FILTER_FID:-"$LUSTRE/utils/ll_decode_filter_fid"}
- [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID=$(which ll_decode_filter_fid)
+ [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID="ll_decode_filter_fid"
export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
- [ ! -f "$MKFS" ] && export MKFS=$(which mkfs.lustre)
+ [ ! -f "$MKFS" ] && export MKFS="mkfs.lustre"
export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
- [ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
+ [ ! -f "$TUNEFS" ] && export TUNEFS="tunefs.lustre"
export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
[ ! -f "$LUSTRE_RMMOD" ] &&
IDENTITY_UPCALL=false
;;
esac
+ USE_OFD=${USE_OFD:-yes}
+ [ "$USE_OFD" = "yes" ] && LOAD_MODULES_REMOTE=true
+
export LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
# Paths on remote nodes, if different
}
load_modules_local() {
- if [ "$USE_OFD" == yes ]; then
- if module_loaded obdfilter; then
- if ! $LUSTRE_RMMOD ldiskfs; then
- echo "$HOSTNAME may still be using obdfilter.ko"
- return 1
- fi
- fi
- else
- if module_loaded ofd; then
- if ! $LUSTRE_RMMOD ldiskfs; then
- echo "$HOSTNAME may still be using ofd.ko"
- return 1
- fi
- fi
- fi
+ [ $(facet_fstype ost1) == "zfs" ] && export USE_OFD=yes
if [ -n "$MODPROBE" ]; then
# use modprobe
fi
fi
- local ncpts=0
# if there is only one CPU core, libcfs can only create one partition
# if there is more than 4 CPU cores, libcfs should create multiple CPU
# partitions. So we just force libcfs to create 2 partitions for
if [ $ncpus -le 4 ] && [ $ncpus -gt 1 ]; then
# force to enable multiple CPU partitions
echo "Force libcfs to create 2 CPU partitions"
- ncpts=2
+ MODOPTS_LIBCFS="cpu_npartitions=2 $MODOPTS_LIBCFS"
else
echo "libcfs will create CPU partition based on online CPUs"
fi
- load_module ../libcfs/libcfs/libcfs cpu_npartitions=$ncpts
+ load_module ../libcfs/libcfs/libcfs
[ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
[ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
[ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
+ modprobe zfs
load_module osd-zfs/osd_zfs
fi
load_module mgs/mgs
load_module osd-ldiskfs/osd_ldiskfs
fi
load_module mdt/mdt
- load_module cmm/cmm
load_module ost/ost
- if [ "$USE_OFD" == yes ]; then
- load_module ofd/ofd
- else
- load_module obdfilter/obdfilter
- fi
+ load_module lod/lod
+ load_module osp/osp
+ load_module ofd/ofd
+ load_module osp/osp
fi
# bug 19124
# load modules on remote nodes optionally
# lustre-tests have to be installed on these nodes
- if $LOAD_MODULES_REMOTE ; then
+ if $LOAD_MODULES_REMOTE; then
local list=$(comma_list $(remote_nodes_list))
- echo loading modules on $list
- do_rpc_nodes $list load_modules_local
+ if [ -n "$list" ]; then
+ echo "loading modules on: '$list'"
+ do_rpc_nodes "$list" load_modules_local
+ fi
fi
}
$LUSTRE_RMMOD ldiskfs || return 2
- if $LOAD_MODULES_REMOTE ; then
+ if $LOAD_MODULES_REMOTE; then
local list=$(comma_list $(remote_nodes_list))
- if [ ! -z $list ]; then
- echo unloading modules on $list
- do_rpc_nodes $list $LUSTRE_RMMOD ldiskfs
- do_rpc_nodes $list check_mem_leak
+ if [ -n "$list" ]; then
+ echo "unloading modules on: '$list'"
+ do_rpc_nodes "$list" $LUSTRE_RMMOD ldiskfs
+ do_rpc_nodes "$list" check_mem_leak
fi
fi
}
set_default_debug_nodes () {
- local nodes=$1
+ local nodes="$1"
- if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
- nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
- set_default_debug
- fi
+ if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
+ nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
+ set_default_debug
+ fi
- [[ -n $nodes ]] && do_rpc_nodes $nodes set_default_debug \
- \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
+ do_rpc_nodes "$nodes" set_default_debug \
+ \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
}
set_default_debug_facet () {
# save quota version (both administrative and operational quotas)
# add an additional parameter if mountpoint is ever different from $MOUNT
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
quota_save_version() {
local fsname=${2:-$FSNAME}
local spec=$1
done
}
-# client could mount several lustre
+# client could mount several lustre
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
quota_type () {
local fsname=${1:-$FSNAME}
local rc=0
return $rc
}
-restore_quota_type () {
- local mntpt=${1:-$MOUNT}
- local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
- if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
- return
- fi
- quota_save_version $old_QUOTA_TYPE
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+restore_quota_old() {
+ local mntpt=${1:-$MOUNT}
+ local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
+ if [ ! "$old_QUOTA_TYPE" ] ||
+ [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
+ return
+ fi
+ quota_save_version $old_QUOTA_TYPE
}
-setup_quota(){
- local mntpt=$1
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+setup_quota_old(){
+ local mntpt=$1
- if [ "$USE_OFD" = "yes" ]; then
- $LFS quotacheck $mntpt || error "quotacheck failed"
- return
- fi
+ # no quota enforcement for now and accounting works out of the box
+ return
# We need save the original quota_type params, and restore them after testing
done
}
+# get mdt quota type
+mdt_quota_type() {
+ local varsvc=${SINGLEMDS}_svc
+ do_facet $SINGLEMDS $LCTL get_param -n \
+ osd-$FSTYPE.${!varsvc}.quota_slave.enabled
+}
+
+# get ost quota type
+ost_quota_type() {
+ # All OSTs should have same quota type
+ local varsvc=ost1_svc
+ do_facet ost1 $LCTL get_param -n \
+ osd-$FSTYPE.${!varsvc}.quota_slave.enabled
+}
+
+# restore old quota type settings
+restore_quota() {
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ restore_quota_old
+ return
+ fi
+
+ if [ "$old_MDT_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.mdt=$old_MDT_QUOTA_TYPE
+ fi
+ if [ "$old_OST_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.ost=$old_OST_QUOTA_TYPE
+ fi
+}
+
+setup_quota(){
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ setup_quota_old $1
+ return
+ fi
+
+ local mntpt=$1
+
+ # save old quota type & set new quota type
+ local mdt_qtype=$(mdt_quota_type)
+ local ost_qtype=$(ost_quota_type)
+
+ echo "[HOST:$HOSTNAME] [old_mdt_qtype:$mdt_qtype]" \
+ "[old_ost_qtype:$ost_qtype] [new_qtype:$QUOTA_TYPE]"
+
+ export old_MDT_QUOTA_TYPE=$mdt_qtype
+ export old_OST_QUOTA_TYPE=$ost_qtype
+
+ do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$QUOTA_TYPE ||
+ error "set mdt quota type failed"
+ do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$QUOTA_TYPE ||
+ error "set ost quota type failed"
+
+ local quota_usrs=$QUOTA_USERS
+
+ # get_filesystem_size
+ local disksz=$(lfs df $mntpt | grep "filesystem summary:" |
+ awk '{print $3}')
+ local blk_soft=$((disksz + 1024))
+ local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
+
+ local inodes=$(lfs df -i $mntpt | grep "filesystem summary:" |
+ awk '{print $3}')
+ local i_soft=$inodes
+ local i_hard=$((i_soft + i_soft / 20))
+
+ echo "Total disk size: $disksz block-softlimit: $blk_soft" \
+ "block-hardlimit: $blk_hard inode-softlimit: $i_soft" \
+ "inode-hardlimit: $i_hard"
+
+ local cmd
+ for usr in $quota_usrs; do
+ echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
+ for type in u g; do
+ cmd="$LFS setquota -$type $usr -b $blk_soft"
+ cmd="$cmd -B $blk_hard -i $i_soft -I $i_hard $mntpt"
+ echo "+ $cmd"
+ eval $cmd || error "$cmd FAILED!"
+ done
+ # display the quota status
+ echo "Quota settings for $usr : "
+ $LFS quota -v -u $usr $mntpt || true
+ done
+}
+
zconf_mount() {
local client=$1
local mnt=$2
echo $(comma_list $affected)
}
-facet_up () {
- local facet=$1
- local host=${2:-$(facet_host $facet)}
+facet_up() {
+ local facet=$1
+ local host=${2:-$(facet_host $facet)}
- local label=$(convert_facet2label $facet)
- do_node $host lctl dl | awk '{print $4}' | grep -q $label
+ local label=$(convert_facet2label $facet)
+ do_node $host $LCTL dl | awk '{print $4}' | grep -q -x $label
}
facets_up_on_host () {
}
check_progs_installed () {
- local nodes=$1
- shift
+ local nodes=$1
+ shift
- do_rpc_nodes $nodes _check_progs_installed $@
+ do_rpc_nodes "$nodes" _check_progs_installed $@
}
# recovery-scale functions
check_mem_leak || exit 204
- [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl && \
- echo "$0: lustre didn't clean up..." 1>&2 && return 202 || true
+ [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl &&
+ echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
+ return 202 || true
- if module_loaded lnet || module_loaded libcfs; then
- echo "$0: modules still loaded..." 1>&2
- /sbin/lsmod 1>&2
- return 203
- fi
- return 0
+ if module_loaded lnet || module_loaded libcfs; then
+ echo "$TESTSUITE: modules still loaded..." 1>&2
+ /sbin/lsmod 1>&2
+ return 203
+ fi
+ return 0
}
wait_update () {
return 3
}
-wait_update_facet () {
- local facet=$1
- wait_update $(facet_active_host $facet) "$@"
+wait_update_facet() {
+ local facet=$1
+ shift
+ wait_update $(facet_active_host $facet) "$@"
}
sync_all_data() {
grep -v 'Found no match'
}
-wait_delete_completed () {
- local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
+wait_delete_completed_mds() {
+ local MAX_WAIT=${1:-20}
+ local mds2sync=""
+ local stime=`date +%s`
+ local etime
+ local node
+ local changes
+
+ # find MDS with pending deletions
+ for node in $(mdts_nodes); do
+ changes=$(do_node $node "lctl get_param -n osc.*MDT*.sync_*" \
+ 2>/dev/null | calc_sum)
+ if [ -z "$changes" ] || [ $changes -eq 0 ]; then
+ continue
+ fi
+ mds2sync="$mds2sync $node"
+ done
+ if [ "$mds2sync" == "" ]; then
+ return
+ fi
+ mds2sync=$(comma_list $mds2sync)
+
+ # sync MDS transactions
+ do_nodes $mds2sync "lctl set_param -n osd*.*MD*.force_sync 1"
+
+ # wait till all changes are sent and commmitted by OSTs
+ # for ldiskfs space is released upon execution, but DMU
+ # do this upon commit
+
+ local WAIT=0
+ while [ "$WAIT" -ne "$MAX_WAIT" ]; do
+ changes=$(do_nodes $mds2sync "lctl get_param -n osc.*MDT*.sync_*" \
+ | calc_sum)
+ #echo "$node: $changes changes on all"
+ if [ "$changes" -eq "0" ]; then
+ etime=`date +%s`
+ #echo "delete took $((etime - stime)) seconds"
+ return
+ fi
+ sleep 1
+ WAIT=$(( WAIT + 1))
+ done
- local WAIT=0
- local MAX_WAIT=20
- while [ "$WAIT" -ne "$MAX_WAIT" ]; do
- sleep 1
- TOTAL=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
- [ "$TOTAL" -eq "$TOTALPREV" ] && return 0
- echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
- TOTALPREV=$TOTAL
- WAIT=$(( WAIT + 1))
- done
- echo "Delete is not completed in $MAX_WAIT sec"
- return 1
+ etime=`date +%s`
+ echo "Delete is not completed in $((etime - stime)) seconds"
+ do_nodes $mds2sync "lctl get_param osc.*MDT*.sync_*"
}
wait_for_host() {
fi
echo affected facets: $facets
- # we can use "for" here because we are waiting the slowest
- for facet in ${facets//,/ }; do
- local var_svc=${facet}_svc
- local param="*.${!var_svc}.recovery_status"
+ # we can use "for" here because we are waiting the slowest
+ for facet in ${facets//,/ }; do
+ local var_svc=${facet}_svc
+ local param="*.${!var_svc}.recovery_status"
- local host=$(facet_active_host $facet)
- do_rpc_nodes $host _wait_recovery_complete $param $MAX
- done
+ local host=$(facet_active_host $facet)
+ do_rpc_nodes "$host" _wait_recovery_complete $param $MAX
+ done
}
wait_mds_ost_sync () {
}
wait_destroy_complete () {
- echo "Waiting for destroy to be done..."
- # MAX value shouldn't be big as this mean server responsiveness
- # never increase this just to make test pass but investigate
- # why it takes so long time
- local MAX=5
- local WAIT=0
- while [ $WAIT -lt $MAX ]; do
- local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
- local con=1
- for ((i=0; i<${#RPCs[@]}; i++)); do
- [ ${RPCs[$i]} -eq 0 ] && continue
- # there are still some destroy RPCs in flight
- con=0
- break;
- done
- sleep 1
- [ ${con} -eq 1 ] && return 0 # done waiting
- echo "Waiting $WAIT secs for destroys to be done."
- WAIT=$((WAIT + 1))
- done
- echo "Destroys weren't done in $MAX sec."
- return 1
+ echo "Waiting for local destroys to complete"
+ # MAX value shouldn't be big as this mean server responsiveness
+ # never increase this just to make test pass but investigate
+ # why it takes so long time
+ local MAX=5
+ local WAIT=0
+ while [ $WAIT -lt $MAX ]; do
+ local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
+ local con=1
+ local i
+
+ for ((i=0; i<${#RPCs[@]}; i++)); do
+ [ ${RPCs[$i]} -eq 0 ] && continue
+ # there are still some destroy RPCs in flight
+ con=0
+ break;
+ done
+ sleep 1
+ [ ${con} -eq 1 ] && return 0 # done waiting
+ echo "Waiting ${WAIT}s for local destroys to complete"
+ WAIT=$((WAIT + 1))
+ done
+ echo "Local destroys weren't done in $MAX sec."
+ return 1
+}
+
+wait_delete_completed() {
+ wait_delete_completed_mds $1 || return $?
+ wait_destroy_complete
}
wait_exit_ST () {
# make sure there will be no seq change
local clients=${CLIENTS:-$HOSTNAME}
- do_nodes $clients "f=${MOUNT}/fsa-\\\$(hostname); mcreate \\\$f; rm \\\$f"
+ local f=fsa-\\\$\(hostname\)
+ do_nodes $clients "mcreate $MOUNT/$f; rm $MOUNT/$f"
+ do_nodes $clients "if [ -d $MOUNT2 ]; then mcreate $MOUNT2/$f; rm $MOUNT2/$f; fi"
local svc=${facet}_svc
do_facet $facet $LCTL --device %${!svc} notransno
opts+=${L_GETIDENTITY:+" --param=mdt.identity_upcall=$L_GETIDENTITY"}
if [ $fstype == ldiskfs ]; then
- opts+=${IAMDIR:+" --iam-dir"}
-
fs_mkfs_opts+=${MDSJOURNALSIZE:+" -J size=$MDSJOURNALSIZE"}
fs_mkfs_opts+=${MDSISIZE:+" -i $MDSISIZE"}
fi
}
init_facet_vars () {
- [ "$CLIENTONLY" ] && return 0
- local facet=$1
- shift
- local device=$1
+ [ "$CLIENTONLY" ] && return 0
+ local facet=$1
+ shift
+ local device=$1
- shift
+ shift
- eval export ${facet}_dev=${device}
- eval export ${facet}_opt=\"$@\"
+ eval export ${facet}_dev=${device}
+ eval export ${facet}_opt=\"$@\"
- local dev=${facet}_dev
- local label=$(devicelabel ${facet} ${!dev})
- [ -z "$label" ] && echo no label for ${!dev} && exit 1
+ local dev=${facet}_dev
- eval export ${facet}_svc=${label}
+ # We need to loop for the label
+ # in case its not initialized yet.
+ for wait_time in {0,1,3,5,10}; do
- local varname=${facet}failover_HOST
- if [ -z "${!varname}" ]; then
- eval $varname=$(facet_host $facet)
- fi
+ if [ $wait_time -gt 0 ]; then
+ echo "${!dev} not yet initialized,"\
+ "waiting ${wait_time} seconds."
+ sleep $wait_time
+ fi
- # ${facet}failover_dev is set in cfg file
- varname=${facet}failover_dev
- if [ -n "${!varname}" ] ; then
- eval export ${facet}failover_dev=${!varname}
- else
- eval export ${facet}failover_dev=$device
- fi
+ local label=$(devicelabel ${facet} ${!dev})
- # get mount point of already mounted device
- # is facet_dev is already mounted then use the real
- # mount point of this facet; otherwise use $(facet_mntpt $facet)
- # i.e. ${facet}_MOUNT if specified by user or default
- local mntpt=$(do_facet ${facet} cat /proc/mounts | \
- awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
- if [ -z $mntpt ]; then
- mntpt=$(facet_mntpt $facet)
- fi
- eval export ${facet}_MOUNT=$mntpt
+ # Check to make sure the label does
+ # not include ffff at the end of the label.
+ # This indicates it has not been initialized yet.
+
+ if [[ $label =~ [f|F]{4}$ ]]; then
+ # label is not initialized, unset the result
+ # and either try again or fail
+ unset label
+ else
+ break
+ fi
+ done
+
+ [ -z "$label" ] && echo no label for ${!dev} && exit 1
+
+ eval export ${facet}_svc=${label}
+
+ local varname=${facet}failover_HOST
+ if [ -z "${!varname}" ]; then
+ eval $varname=$(facet_host $facet)
+ fi
+
+ # ${facet}failover_dev is set in cfg file
+ varname=${facet}failover_dev
+ if [ -n "${!varname}" ] ; then
+ eval export ${facet}failover_dev=${!varname}
+ else
+ eval export ${facet}failover_dev=$device
+ fi
+
+ # get mount point of already mounted device
+ # is facet_dev is already mounted then use the real
+ # mount point of this facet; otherwise use $(facet_mntpt $facet)
+ # i.e. ${facet}_MOUNT if specified by user or default
+ local mntpt=$(do_facet ${facet} cat /proc/mounts | \
+ awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
+ if [ -z $mntpt ]; then
+ mntpt=$(facet_mntpt $facet)
+ fi
+ eval export ${facet}_MOUNT=$mntpt
}
init_facets_vars () {
[ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
}
+set_conf_param_and_check() {
+ local myfacet=$1
+ local TEST=$2
+ local PARAM=$3
+ local ORIG=$(do_facet $myfacet "$TEST")
+ if [ $# -gt 3 ]; then
+ local FINAL=$4
+ else
+ local -i FINAL
+ FINAL=$((ORIG + 5))
+ fi
+ echo "Setting $PARAM from $ORIG to $FINAL"
+ do_facet mgs "$LCTL conf_param $PARAM='$FINAL'" ||
+ error "conf_param $PARAM failed"
+
+ wait_update $(facet_host $myfacet) "$TEST" "$FINAL" ||
+ error "check $PARAM failed!"
+}
+
init_param_vars () {
remote_mds_nodsh ||
TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
setup_quota $MOUNT || return 2
else
echo "disable quota as required"
- $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
+ # $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
fi
fi
return 0
}
check_config_clients () {
- local clients=${CLIENTS:-$HOSTNAME}
- local mntpt=$1
+ local clients=${CLIENTS:-$HOSTNAME}
+ local mntpt=$1
- nfs_client_mode && return
+ nfs_client_mode && return
- do_rpc_nodes $clients check_config_client $mntpt
+ do_rpc_nodes "$clients" check_config_client $mntpt
- sanity_mount_check ||
- error "environments are insane!"
+ sanity_mount_check || error "environments are insane!"
}
check_timeout () {
# verify a directory is shared among nodes.
check_shared_dir() {
- local dir=$1
+ local dir=$1
- [ -z "$dir" ] && return 1
- do_rpc_nodes $(comma_list $(nodes_list)) check_logdir $dir
- check_write_access $dir || return 1
- return 0
+ [ -z "$dir" ] && return 1
+ do_rpc_nodes "$(comma_list $(nodes_list))" check_logdir $dir
+ check_write_access $dir || return 1
+ return 0
}
# Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
local ostidx
local dev
+ [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
+ { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
+
check_shared_dir $SHARED_DIRECTORY ||
error "$SHARED_DIRECTORY isn't a shared directory"
run_lfsck
fi
- if is_mounted $MOUNT; then
- [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
- error "remove sub-test dirs failed"
- [ "$ENABLE_QUOTA" ] && restore_quota_type || true
- fi
+ if is_mounted $MOUNT; then
+ [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
+ error "remove sub-test dirs failed"
+ [ "$ENABLE_QUOTA" ] && restore_quota || true
+ fi
if [ "$I_UMOUNTED2" = "yes" ]; then
restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
eval $@
}
+# Convert a space-delimited list to a comma-delimited list. If the input is
+# only whitespace, ensure the output is empty (i.e. "") so [ -n $list ] works
comma_list() {
- # the sed converts spaces to commas, but leaves the last space
- # alone, so the line doesn't end with a comma.
- echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
+ # echo is used to convert newlines to spaces, since it doesn't
+ # introduce a trailing space as using "tr '\n' ' '" does
+ echo $(tr -s " " "\n" <<< $* | sort -b -u) | tr ' ' ','
}
list_member () {
}
drop_ldlm_cancel() {
-#define OBD_FAIL_LDLM_CANCEL 0x304
+#define OBD_FAIL_LDLM_CANCEL_NET 0x304
local RC=0
local list=$(comma_list $(mdts_nodes) $(osts_nodes))
do_nodes $list lctl set_param fail_loc=0x304
}
drop_bl_callback() {
-#define OBD_FAIL_LDLM_BL_CALLBACK 0x305
+#define OBD_FAIL_LDLM_BL_CALLBACK_NET 0x305
RC=0
do_facet client lctl set_param fail_loc=0x305
do_facet client "$@" || RC=$?
gather_logs $(comma_list $(nodes_list))
fi
- debugrestore
- [ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
- echo "$@" > $LOGDIR/err
+ debugrestore
+ [ "$TESTSUITELOG" ] &&
+ echo "$TESTSUITE: $TYPE: $TESTNAME $@" >> $TESTSUITELOG
+ echo "$@" > $LOGDIR/err
}
exit_status () {
error_noexit "$@"
}
+error_and_remount() {
+ error_noexit "$@"
+ remount_client $MOUNT
+ exit 1
+}
+
skip_env () {
$FAIL_ON_SKIP_ENV && error false $@ || skip $@
}
return $?
}
-equals_msg() {
- banner "$*"
-}
-
log() {
echo "$*"
module_loaded lnet || load_modules
}
complete () {
- equals_msg $1 test complete, duration $2 sec
+ local duration=$1
+
+ banner test complete, duration $duration sec
[ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
- echo duration $2 >>$TESTSUITELOG
+ echo duration $duration >>$TESTSUITELOG
}
pass() {
}
remote_nodes_list () {
- local rnodes=$(nodes_list)
- rnodes=$(echo " $rnodes " | sed -re "s/\s+$HOSTNAME\s+/ /g")
- echo $rnodes
+ echo $(nodes_list) | sed -re "s/\<$HOSTNAME\>//g"
}
init_clients_lists () {
}
check_catastrophe() {
- local rnodes=${1:-$(comma_list $(remote_nodes_list))}
- local C=$CATASTROPHE
- [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
+ local rnodes=${1:-$(comma_list $(remote_nodes_list))}
+ local C=$CATASTROPHE
+ [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
- if [ $rnodes ]; then
- do_nodes $rnodes "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
-if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
-exit \\\$rc;"
- fi
+ [ -z "$rnodes" ] && return 0
+
+ do_nodes "$rnodes" "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
+ if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
+ exit \\\$rc;"
}
# CMD: determine mds index where directory inode presents
# 2. wait the deadline of client 2nd request
local maxtime=$(( 2 * $(request_timeout $facet)))
- if ! do_rpc_nodes $(facet_host $facet) \
- _wait_import_state $expected $param $maxtime; then
- error "import is not in ${expected} state"
- return 1
- fi
+ if ! do_rpc_nodes "$(facet_host $facet)" \
+ _wait_import_state $expected $param $maxtime; then
+ error "import is not in ${expected} state"
+ return 1
+ fi
- return 0
+ return 0
}
get_clientmdc_proc_path() {
}
do_rpc_nodes () {
- local list=$1
- shift
+ local list=$1
+ shift
+
+ [ -z "$list" ] && return 0
- # Add paths to lustre tests for 32 and 64 bit systems.
- local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
- do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
+ # Add paths to lustre tests for 32 and 64 bit systems.
+ local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
+ do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
}
wait_clients_import_state () {
local params=$(expand_list $params $proc_path)
done
- if ! do_rpc_nodes $list wait_import_state $expected $params; then
- error "import is not in ${expected} state"
- return 1
- fi
+ if ! do_rpc_nodes "$list" wait_import_state $expected $params; then
+ error "import is not in ${expected} state"
+ return 1
+ fi
}
oos_full() {
local metaea=${TMP}/backup_restore.ea
local metadata=${TMP}/backup_restore.tgz
local opts=${MDS_MOUNT_OPTS}
+ local svc=${SINGLEMDS}_svc
if ! ${rcmd} test -b ${devname}; then
opts=$(csa_add "$opts" -o loop)
${rcmd} umount -d $mntpt || return 10
# step 14: cleanup tmp backup
${rcmd} rm -f $metaea $metadata
+ # step 15: reset device label - it's not virgin on
+ ${rcmd} e2label $devname ${!svc}
}
# remove OI files
${rcmd} umount -d $mntpt || return 2
# OI files will be recreated when mounted as lustre next time.
}
+
+# generate maloo upload-able log file name
+# \param logname specify unique part of file name
+generate_logname() {
+ local logname=${1:-"default_logname"}
+
+ echo "$TESTLOG_PREFIX.$TESTNAME.$logname.$(hostname -s).log"
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff