#!/bin/bash
-# vim:expandtab:shiftwidth=4:softtabstop=4:tabstop=4:
trap 'print_summary && touch $TF_FAIL && \
echo "test-framework exiting on error"' ERR
set -e
#set -x
+export EJOURNAL=${EJOURNAL:-""}
export REFORMAT=${REFORMAT:-""}
export WRITECONF=${WRITECONF:-""}
-export VERBOSE=false
+export VERBOSE=${VERBOSE:-false}
export CATASTROPHE=${CATASTROPHE:-/proc/sys/lnet/catastrophe}
export GSS=false
export GSS_KRB5=false
export GSS_PIPEFS=false
export IDENTITY_UPCALL=default
export QUOTA_AUTO=1
+export JOBSTATS_AUTO=${JOBSTATS_AUTO:-1}
+export JOBID_VAR=${JOBID_VAR:-"procname_uid"}
+
+# LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
+# LOAD_LLOOP is true. LOAD_LLOOP is false by default.
+export LOAD_LLOOP=${LOAD_LLOOP:-false}
#export PDSH="pdsh -S -Rssh -w"
. $LUSTRE/tests/functions.sh
. $LUSTRE/tests/yaml.sh
+export LD_LIBRARY_PATH=${LUSTRE}/utils:${LD_LIBRARY_PATH}
+
LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
. $EXCEPT_LIST_FILE
fi
-[ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
-[ -z "$MODPROBECONF" -a -f /etc/modprobe.d/Lustre ] && MODPROBECONF=/etc/modprobe.d/Lustre
+# check config files for options in decreasing order of preference
+[ -z "$MODPROBECONF" -a -f /etc/modprobe.d/lustre.conf ] &&
+ MODPROBECONF=/etc/modprobe.d/lustre.conf
+[ -z "$MODPROBECONF" -a -f /etc/modprobe.d/Lustre ] &&
+ MODPROBECONF=/etc/modprobe.d/Lustre
+[ -z "$MODPROBECONF" -a -f /etc/modprobe.conf ] &&
+ MODPROBECONF=/etc/modprobe.conf
assert_DIR () {
local failed=""
print_summary () {
trap 0
[ "$TESTSUITE" == "lfsck" ] && return 0
- [ -n "$ONLY" ] && echo "WARNING: ONLY is set to ${ONLY}."
- local form="%-13s %-17s %s\n"
- printf "$form" "status" "script" "skipped tests E(xcluded) S(low)"
+ [ -n "$ONLY" ] && echo "WARNING: ONLY is set to $(echo $ONLY)"
+ local details
+ local form="%-13s %-17s %-9s %s %s\n"
+ printf "$form" "status" "script" "Total(sec)" "E(xcluded) S(low)"
echo "------------------------------------------------------------------------------------"
for O in $DEFAULT_SUITES; do
- local skipped=""
- local slow=""
O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
- local o=$(echo $O | tr "[:upper:]" "[:lower:]")
- o=${o//_/-}
+ [ "${!O}" = "no" ] && continue || true
+ local o=$(echo $O | tr "[:upper:]_" "[:lower:]-")
local log=${TMP}/${o}.log
- [ -f $log ] && skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
- [ -f $log ] && slow=$(grep SLOW $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
- [ "${!O}" = "done" ] && \
- printf "$form" "Done" "$O" "E=$skipped" && \
- [ -n "$slow" ] && printf "$form" "-" "-" "S=$slow"
-
+ if is_sanity_benchmark $o; then
+ log=${TMP}/sanity-benchmark.log
+ fi
+ local slow=
+ local skipped=
+ local total=
+ local status=Unfinished
+ if [ -f $log ]; then
+ skipped=$(grep excluded $log | awk '{ printf " %s", $3 }' | sed 's/test_//g')
+ slow=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | sort -nr -k 3 | head -5 | awk '{ print $2":"$3"s" }')
+ total=$(grep duration $log | awk '{ print $2}')
+ if [ "${!O}" = "done" ]; then
+ status=Done
+ fi
+ if $DDETAILS; then
+ local durations=$(egrep "^PASS|^FAIL" $log | tr -d "("| sed s/s\)$//g | awk '{ print $2":"$3"|" }')
+ details=$(printf "%s\n%s %s %s\n" "$details" "DDETAILS" "$O" "$(echo $durations)")
+ fi
+ fi
+ printf "$form" $status "$O" "${total}" "E=$skipped"
+ printf "$form" "-" "-" "-" "S=$(echo $slow)"
done
for O in $DEFAULT_SUITES; do
O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
if [ "${!O}" = "no" ]; then
- # FIXME.
- # only for those tests suits which are run directly from acc-sm script:
- # bonnie, iozone, etc.
- if [ -f "$TESTSUITELOG" ] && grep FAIL $TESTSUITELOG | grep -q ' '$O ; then
- printf "$form" "UNFINISHED" "$O" ""
- else
- printf "$form" "Skipped" "$O" ""
- fi
+ printf "$form" "Skipped" "$O" ""
fi
done
- for O in $DEFAULT_SUITES; do
- O=$(echo $O | tr "-" "_" | tr "[:lower:]" "[:upper:]")
- [ "${!O}" = "done" -o "${!O}" = "no" ] || \
- printf "$form" "UNFINISHED" "$O" ""
- done
+ # print the detailed tests durations if DDETAILS=true
+ if $DDETAILS; then
+ echo "$details"
+ fi
}
init_test_env() {
export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
export E2FSCK=${E2FSCK:-e2fsck}
export LFSCK_BIN=${LFSCK_BIN:-lfsck}
- export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check filesystem after each test suit
- export SKIP_LFSCK=${SKIP_LFSCK:-"yes"} # bug 13698, change to "no" when fixed
- export SHARED_DIRECTORY=${SHARED_DIRECTORY:-"/tmp"}
+
+ export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
export FSCK_MAX_ERR=4 # File system errors left uncorrected
- if [ "$SKIP_LFSCK" == "no" ]; then
- if [ ! -x `which $LFSCK_BIN` ]; then
- log "$($E2FSCK -V)"
- error_exit "$E2FSCK does not support lfsck"
- fi
- export MDSDB=${MDSDB:-$SHARED_DIRECTORY/mdsdb}
- export OSTDB=${OSTDB:-$SHARED_DIRECTORY/ostdb}
- export MDSDB_OPT="--mdsdb $MDSDB"
- export OSTDB_OPT="--ostdb $OSTDB-\$ostidx"
- fi
+ export ZFS=${ZFS:-zfs}
+ export ZPOOL=${ZPOOL:-zpool}
+ export ZDB=${ZDB:-zdb}
+
#[ -d /r ] && export ROOT=${ROOT:-/r}
export TMP=${TMP:-$ROOT/tmp}
export TESTSUITELOG=${TMP}/${TESTSUITE}.log
- if [[ -z $LOGDIRSET ]]; then
- export LOGDIR=${LOGDIR:-${TMP}/test_logs/}/$(date +%s)
- export LOGDIRSET=true
- fi
- export HOSTNAME=${HOSTNAME:-`hostname`}
+ export LOGDIR=${LOGDIR:-${TMP}/test_logs/$(date +%s)}
+ export TESTLOG_PREFIX=$LOGDIR/$TESTSUITE
+
+ export HOSTNAME=${HOSTNAME:-$(hostname -s)}
if ! echo $PATH | grep -q $LUSTRE/utils; then
- export PATH=$PATH:$LUSTRE/utils
+ export PATH=$LUSTRE/utils:$PATH
fi
if ! echo $PATH | grep -q $LUSTRE/utils/gss; then
- export PATH=$PATH:$LUSTRE/utils/gss
+ export PATH=$LUSTRE/utils/gss:$PATH
fi
if ! echo $PATH | grep -q $LUSTRE/tests; then
export PATH=$LUSTRE/tests:$PATH
fi
+ if ! echo $PATH | grep -q $LUSTRE/../lustre-iokit/sgpdd-survey; then
+ export PATH=$LUSTRE/../lustre-iokit/sgpdd-survey:$PATH
+ fi
export LST=${LST:-"$LUSTRE/../lnet/utils/lst"}
[ ! -f "$LST" ] && export LST=$(which lst)
- export SGPDDSURVEY=${SGPDDSURVEY:-$(which sgpdd-survey)}
+ export SGPDDSURVEY=${SGPDDSURVEY:-"$LUSTRE/../lustre-iokit/sgpdd-survey/sgpdd-survey")}
+ [ ! -f "$SGPDDSURVEY" ] && export SGPDDSURVEY=$(which sgpdd-survey)
+ # Ubuntu, at least, has a truncate command in /usr/bin
+ # so fully path our truncate command.
+ export TRUNCATE=${TRUNCATE:-$LUSTRE/tests/truncate}
export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
[ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
export PATH=$LUSTRE/tests/racer:$PATH:
fi
if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
- export PATH=$PATH:$LUSTRE/tests/mpi
+ export PATH=$LUSTRE/tests/mpi:$PATH
fi
export RSYNC_RSH=${RSYNC_RSH:-rsh}
+
export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
[ ! -f "$LCTL" ] && export LCTL=$(which lctl)
export LFS=${LFS:-"$LUSTRE/utils/lfs"}
[ ! -f "$LFS" ] && export LFS=$(which lfs)
+ SETSTRIPE=${SETSTRIPE:-"$LFS setstripe"}
+ GETSTRIPE=${GETSTRIPE:-"$LFS getstripe"}
+
export L_GETIDENTITY=${L_GETIDENTITY:-"$LUSTRE/utils/l_getidentity"}
if [ ! -f "$L_GETIDENTITY" ]; then
if `which l_getidentity > /dev/null 2>&1`; then
[ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
- [ ! -f "$LUSTRE_RMMOD" ] && export LUSTRE_RMMOD=$(which lustre_rmmod 2> /dev/null)
- export FSTYPE=${FSTYPE:-"ldiskfs"}
+ [ ! -f "$LUSTRE_RMMOD" ] &&
+ export LUSTRE_RMMOD=$(which lustre_rmmod 2> /dev/null)
+ export LFS_MIGRATE=${LFS_MIGRATE:-$LUSTRE/scripts/lfs_migrate}
+ [ ! -f "$LFS_MIGRATE" ] &&
+ export LFS_MIGRATE=$(which lfs_migrate 2> /dev/null)
export NAME=${NAME:-local}
export LGSSD=${LGSSD:-"$LUSTRE/utils/gss/lgssd"}
[ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
export CLIENTMODSONLY=yes
fi
+ export SHUTDOWN_ATTEMPTS=${SHUTDOWN_ATTEMPTS:-3}
+
# command line
while getopts "rvwf:" opt $*; do
shift $((OPTIND - 1))
ONLY=${ONLY:-$*}
+ # print the durations of each test if "true"
+ DDETAILS=${DDETAILS:-false}
[ "$TESTSUITELOG" ] && rm -f $TESTSUITELOG || true
rm -f $TMP/*active
}
-case `uname -r` in
-2.4.*) EXT=".o"; USE_QUOTA=no; [ ! "$CLIENTONLY" ] && FSTYPE=ext3;;
- *) EXT=".ko"; USE_QUOTA=yes;;
-esac
+check_cpt_number() {
+ local facet=$1
+ local ncpts
+
+ ncpts=$(do_facet $facet "lctl get_param -n " \
+ "cpu_partition_table 2>/dev/null| wc -l" || echo 1)
+
+ if [ $ncpts -eq 0 ]; then
+ echo "1"
+ else
+ echo $ncpts
+ fi
+}
+
+version_code() {
+ # split arguments like "1.8.6-wc3" into "1", "8", "6", "wc3"
+ eval set -- $(tr "[:punct:]" " " <<< $*)
+ echo -n $((($1 << 16) | ($2 << 8) | $3))
+}
+
+export LINUX_VERSION=$(uname -r | sed -e "s/[-.]/ /3" -e "s/ .*//")
+export LINUX_VERSION_CODE=$(version_code ${LINUX_VERSION//\./ })
module_loaded () {
- /sbin/lsmod | grep -q $1
+ /sbin/lsmod | grep -q "^\<$1\>"
}
# Load a module on the system where this is running.
eval set -- \$$optvar
if [ $# -eq 0 -a -n "$MODPROBECONF" ]; then
# Nothing in $MODOPTS_<MODULE>; try modprobe.conf
- set -- $(grep "^options\\s*\<${module}\>" $MODPROBECONF)
+ set -- $(grep -P "^options\\s+${BASE}" $MODPROBECONF)
# Get rid of "options $module"
(($# > 0)) && shift 2
fi
}
-load_modules_local() {
- if [ -n "$MODPROBE" ]; then
- # use modprobe
- echo "Using modprobe to load modules"
+llite_lloop_enabled() {
+ local n1=$(uname -r | cut -d. -f1)
+ local n2=$(uname -r | cut -d. -f2)
+ local n3=$(uname -r | cut -d- -f1 | cut -d. -f3)
+
+ # load the llite_lloop module for < 2.6.32 kernels
+ if [[ $n1 -lt 2 ]] || [[ $n1 -eq 2 && $n2 -lt 6 ]] || \
+ [[ $n1 -eq 2 && $n2 -eq 6 && $n3 -lt 32 ]] || \
+ $LOAD_LLOOP; then
return 0
fi
+ return 1
+}
+
+load_modules_local() {
+ if [ "$USE_OFD" == yes ]; then
+ if module_loaded obdfilter; then
+ if ! $LUSTRE_RMMOD ldiskfs; then
+ echo "$HOSTNAME may still be using obdfilter.ko"
+ return 1
+ fi
+ fi
+ else
+ if module_loaded ofd; then
+ if ! $LUSTRE_RMMOD ldiskfs; then
+ echo "$HOSTNAME may still be using ofd.ko"
+ return 1
+ fi
+ fi
+ fi
+
+ if [ -n "$MODPROBE" ]; then
+ # use modprobe
+ echo "Using modprobe to load modules"
+ return 0
+ fi
+
+ echo Loading modules from $LUSTRE
+
+ local ncpus
+
+ if [ -f /sys/devices/system/cpu/online ]; then
+ ncpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/online) + 1))
+ echo "detected $ncpus online CPUs by sysfs"
+ else
+ ncpus=$(getconf _NPROCESSORS_CONF 2>/dev/null)
+ local rc=$?
+ if [ $rc -eq 0 ]; then
+ echo "detected $ncpus online CPUs by getconf"
+ else
+ echo "Can't detect number of CPUs"
+ ncpus=1
+ fi
+ fi
+
+ local ncpts=0
+ # if there is only one CPU core, libcfs can only create one partition
+ # if there is more than 4 CPU cores, libcfs should create multiple CPU
+ # partitions. So we just force libcfs to create 2 partitions for
+ # system with 2 or 4 cores
+ if [ $ncpus -le 4 ] && [ $ncpus -gt 1 ]; then
+ # force to enable multiple CPU partitions
+ echo "Force libcfs to create 2 CPU partitions"
+ ncpts=2
+ else
+ echo "libcfs will create CPU partition based on online CPUs"
+ fi
+
+ load_module ../libcfs/libcfs/libcfs cpu_npartitions=$ncpts
- echo Loading modules from $LUSTRE
- load_module ../libcfs/libcfs/libcfs
[ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
[ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
load_module ../lnet/lnet/lnet
load_module obdclass/obdclass
load_module ptlrpc/ptlrpc
load_module ptlrpc/gss/ptlrpc_gss
- [ "$USE_QUOTA" = "yes" -a "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
load_module fld/fld
load_module fid/fid
load_module lmv/lmv
load_module osc/osc
load_module lov/lov
load_module mgc/mgc
+ load_module obdecho/obdecho
if ! client_only; then
- grep -q crc16 /proc/kallsyms || { modprobe crc16 2>/dev/null || true; }
- grep -q jbd /proc/kallsyms || { modprobe jbd 2>/dev/null || true; }
- [ "$FSTYPE" = "ldiskfs" ] && load_module ../ldiskfs/ldiskfs/ldiskfs
- load_module mgs/mgs
- load_module mds/mds
- load_module mdd/mdd
- load_module mdt/mdt
- load_module lvfs/fsfilt_$FSTYPE
- load_module cmm/cmm
- load_module osd-ldiskfs/osd_ldiskfs
- load_module ost/ost
- load_module obdfilter/obdfilter
+ SYMLIST=/proc/kallsyms
+ grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
+ grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
+ grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
+ [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
+ if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
+ load_module osd-zfs/osd_zfs
+ fi
+ load_module mgs/mgs
+ load_module mds/mds
+ load_module mdd/mdd
+ if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
+ #
+ # This block shall be moved up beside osd-zfs as soon
+ # as osd-ldiskfs stops using mdd symbols.
+ #
+ grep -q exportfs_decode_fh $SYMLIST ||
+ { modprobe exportfs 2> /dev/null || true; }
+ load_module ../ldiskfs/ldiskfs/ldiskfs
+ load_module lvfs/fsfilt_ldiskfs
+ load_module osd-ldiskfs/osd_ldiskfs
+ fi
+ load_module mdt/mdt
+ load_module cmm/cmm
+ load_module ost/ost
+ if [ "$USE_OFD" == yes ]; then
+ load_module ofd/ofd
+ else
+ load_module obdfilter/obdfilter
+ fi
fi
+
load_module llite/lustre
- load_module llite/llite_lloop
+ llite_lloop_enabled && load_module llite/llite_lloop
[ -d /r ] && OGDB=${OGDB:-"/r/tmp"}
OGDB=${OGDB:-$TMP}
rm -f $OGDB/ogdb-$HOSTNAME
$LCTL modules > $OGDB/ogdb-$HOSTNAME
# 'mount' doesn't look in $PATH, just sbin
- [ -f $LUSTRE/utils/mount.lustre ] && cp $LUSTRE/utils/mount.lustre /sbin/. || true
+ if [ -f $LUSTRE/utils/mount.lustre ] && \
+ ! grep -qe "/sbin/mount\.lustre " /proc/mounts; then
+ [ ! -f /sbin/mount.lustre ] && touch /sbin/mount.lustre
+ mount --bind $LUSTRE/utils/mount.lustre /sbin/mount.lustre || true
+ fi
}
load_modules () {
- load_modules_local
- # bug 19124
- # load modules on remote nodes optionally
- # lustre-tests have to be installed on these nodes
- if $LOAD_MODULES_REMOTE ; then
- local list=$(comma_list $(remote_nodes_list))
- echo loading modules on $list
- do_rpc_nodes $list load_modules
- fi
+ load_modules_local
+ # bug 19124
+ # load modules on remote nodes optionally
+ # lustre-tests have to be installed on these nodes
+ if $LOAD_MODULES_REMOTE ; then
+ local list=$(comma_list $(remote_nodes_list))
+ echo loading modules on $list
+ do_rpc_nodes $list load_modules_local
+ fi
}
check_mem_leak () {
}
unload_modules() {
- wait_exit_ST client # bug 12845
+ wait_exit_ST client # bug 12845
- $LUSTRE_RMMOD $FSTYPE || return 2
+ $LUSTRE_RMMOD ldiskfs || return 2
- if $LOAD_MODULES_REMOTE ; then
- local list=$(comma_list $(remote_nodes_list))
- if [ ! -z $list ]; then
- echo unloading modules on $list
- do_rpc_nodes $list $LUSTRE_RMMOD $FSTYPE
- do_rpc_nodes $list check_mem_leak
- fi
+ if $LOAD_MODULES_REMOTE ; then
+ local list=$(comma_list $(remote_nodes_list))
+ if [ ! -z $list ]; then
+ echo unloading modules on $list
+ do_rpc_nodes $list $LUSTRE_RMMOD ldiskfs
+ do_rpc_nodes $list check_mem_leak
+ fi
+ fi
+
+ if grep -qe "/sbin/mount\.lustre" /proc/mounts; then
+ umount /sbin/mount.lustre || true
+ [ -w /sbin/mount.lustre -a ! -s /sbin/mount.lustre ] && \
+ rm -f /sbin/mount.lustre || true
fi
check_mem_leak || return 254
fi
}
+facet_type() {
+ local facet=$1
+
+ echo -n $facet | sed -e 's/^fs[0-9]\+//' -e 's/[0-9]\+//' |
+ tr '[:lower:]' '[:upper:]'
+}
+
+facet_number() {
+ local facet=$1
+
+ if [ $facet == mgs ]; then
+ return 1
+ fi
+
+ echo -n $facet | sed -e 's/^fs[0-9]\+//' | sed -e 's/^[a-z]\+//'
+}
+
+facet_fstype() {
+ local facet=$1
+ local var
+
+ var=${facet}_FSTYPE
+ if [ -n "${!var}" ]; then
+ echo -n ${!var}
+ return
+ fi
+
+ var=$(facet_type $facet)FSTYPE
+ if [ -n "${!var}" ]; then
+ echo -n ${!var}
+ return
+ fi
+
+ if [ -n "$FSTYPE" ]; then
+ echo -n $FSTYPE
+ return
+ fi
+
+ return 1
+}
+
+node_fstypes() {
+ local node=$1
+ local fstypes
+ local fstype
+ local facets=$(get_facets)
+ local facet
+
+ for facet in ${facets//,/ }; do
+ if [ $node == $(facet_host $facet) ] ||
+ [ $node == "$(facet_failover_host $facet)" ]; then
+ fstype=$(facet_fstype $facet)
+ if [[ $fstypes != *$fstype* ]]; then
+ fstypes+="${fstypes:+,}$fstype"
+ fi
+ fi
+ done
+ echo -n $fstypes
+}
+
+devicelabel() {
+ local facet=$1
+ local dev=$2
+ local label
+ local fstype=$(facet_fstype $facet)
+
+ case $fstype in
+ ldiskfs)
+ label=$(do_facet ${facet} "$E2LABEL ${dev} 2>/dev/null");;
+ zfs)
+ label=$(do_facet ${facet} "$ZFS get -H -o value lustre:svname \
+ ${dev} 2>/dev/null");;
+ *)
+ error "unknown fstype!";;
+ esac
+
+ echo -n $label
+}
+
mdsdevlabel() {
- local num=$1
- local device=`mdsdevname $num`
- local label=`do_facet mds$num "e2label ${device}" | grep -v "CMD: "`
- echo -n $label
+ local num=$1
+ local device=$(mdsdevname $num)
+ local label=$(devicelabel mds$num ${device} | grep -v "CMD: ")
+ echo -n $label
}
ostdevlabel() {
- local num=$1
- local device=`ostdevname $num`
- local label=`do_facet ost$num "e2label ${device}" | grep -v "CMD: "`
- echo -n $label
+ local num=$1
+ local device=$(ostdevname $num)
+ local label=$(devicelabel ost$num ${device} | grep -v "CMD: ")
+ echo -n $label
+}
+
+#
+# This and set_obdfilter_param() shall be used to access OSD parameters
+# once existed under "obdfilter":
+#
+# mntdev
+# stats
+# read_cache_enable
+# writethrough_cache_enable
+#
+get_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+
+ do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
+ osd-*.$device.$name 2>&1" | grep -v 'Found no match'
+}
+
+set_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+ local value=$4
+
+ do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
+ osd-*.$device.$name=$value 2>&1" | grep -v 'Found no match'
+}
+
+set_debug_size () {
+ local dz=${1:-$DEBUG_SIZE}
+
+ if [ -f /sys/devices/system/cpu/possible ]; then
+ local cpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/possible)+1))
+ else
+ local cpus=$(getconf _NPROCESSORS_CONF)
+ fi
+
+ # bug 19944, adjust size to be -gt num_possible_cpus()
+ # promise 2MB for every cpu at least
+ if [ -n "$cpus" ] && [ $((cpus * 2)) -gt $dz ]; then
+ dz=$((cpus * 2))
+ fi
+ lctl set_param debug_mb=$dz
+}
+
+set_default_debug () {
+ local debug=${1:-"$PTLDEBUG"}
+ local subsys=${2:-"$SUBSYSTEM"}
+ local debug_size=${3:-$DEBUG_SIZE}
+
+ [ -n "$debug" ] && lctl set_param debug="$debug" >/dev/null
+ [ -n "$subsys" ] && lctl set_param subsystem_debug="${subsys# }" >/dev/null
+
+ [ -n "$debug_size" ] && set_debug_size $debug_size > /dev/null
+}
+
+set_default_debug_nodes () {
+ local nodes=$1
+
+ if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
+ nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
+ set_default_debug
+ fi
+
+ [[ -n $nodes ]] && do_rpc_nodes $nodes set_default_debug \
+ \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
+}
+
+set_default_debug_facet () {
+ local facet=$1
+ local node=$(facet_active_host $facet)
+ [ -z "$node" ] && echo "No host defined for facet $facet" && exit 1
+
+ set_default_debug_nodes $node
}
# Facet functions
+mount_facets () {
+ local facets=${1:-$(get_facets)}
+ local facet
+
+ for facet in ${facets//,/ }; do
+ mount_facet $facet
+ local RC=$?
+ [ $RC -eq 0 ] && continue
+
+ if [ "$TESTSUITE.$TESTNAME" = "replay-dual.test_0a" ]; then
+ skip "Restart of $facet failed!." && touch $LU482_FAILED
+ else
+ error "Restart of $facet failed!"
+ fi
+ return $RC
+ done
+}
+
+#
+# Add argument "arg" (e.g., "loop") to the comma-separated list
+# of arguments for option "opt" (e.g., "-o") on command
+# line "opts" (e.g., "-o flock").
+#
+csa_add() {
+ local opts=$1
+ local opt=$2
+ local arg=$3
+ local opt_pattern="\([[:space:]]\+\|^\)$opt"
+
+ if echo "$opts" | grep -q $opt_pattern; then
+ opts=$(echo "$opts" | sed -e \
+ "s/$opt_pattern[[:space:]]*[^[:space:]]\+/&,$arg/")
+ else
+ opts+="${opts:+ }$opt $arg"
+ fi
+ echo -n "$opts"
+}
+
mount_facet() {
- local facet=$1
- shift
- local dev=$(facet_active $facet)_dev
- local opt=${facet}_opt
- echo "Starting ${facet}: ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}"
- do_facet ${facet} mount -t lustre ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}
- RC=${PIPESTATUS[0]}
- if [ $RC -ne 0 ]; then
- echo "mount -t lustre $@ ${!dev} ${MOUNT%/*}/${facet}"
- echo "Start of ${!dev} on ${facet} failed ${RC}"
+ local facet=$1
+ shift
+ local dev=$(facet_active $facet)_dev
+ local opt=${facet}_opt
+ local mntpt=$(facet_mntpt $facet)
+ local opts="${!opt} $@"
+
+ if [ $(facet_fstype $facet) == ldiskfs ] &&
+ ! do_facet $facet test -b ${!dev}; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+
+ echo "Starting ${facet}: $opts ${!dev} $mntpt"
+ # for testing LU-482 error handling in mount_facets() and test_0a()
+ if [ -f $TMP/test-lu482-trigger ]; then
+ RC=2
+ else
+ do_facet ${facet} "mkdir -p $mntpt; mount -t lustre $opts \
+ ${!dev} $mntpt"
+ RC=${PIPESTATUS[0]}
+ fi
+ if [ $RC -ne 0 ]; then
+ echo "Start of ${!dev} on ${facet} failed ${RC}"
else
- do_facet ${facet} "lctl set_param debug=\\\"$PTLDEBUG\\\"; \
- lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\"; \
- lctl set_param debug_mb=${DEBUG_SIZE}; \
- sync"
+ set_default_debug_facet $facet
- label=$(do_facet ${facet} "$E2LABEL ${!dev}")
+ label=$(devicelabel ${facet} ${!dev})
[ -z "$label" ] && echo no label for ${!dev} && exit 1
eval export ${facet}_svc=${label}
echo Started ${label}
eval export ${facet}failover_dev=$device
fi
- do_facet ${facet} mkdir -p ${MOUNT%/*}/${facet}
+ local mntpt=$(facet_mntpt $facet)
+ do_facet ${facet} mkdir -p $mntpt
+ eval export ${facet}_MOUNT=$mntpt
mount_facet ${facet}
RC=$?
return $RC
}
+#
+# When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
+# Because stopping corresponding target may not clear this in-memory state, we
+# need to zap the pool from memory by exporting and reimporting the pool.
+#
+# Although the uberblocks are not updated when a pool is freezed, transactions
+# are still written to the disks. Modified blocks may be cached in memory when
+# tests try reading them back. The export-and-reimport process also evicts any
+# cached pool data from memory to provide the correct "data loss" semantics.
+#
+refresh_disk() {
+ local facet=$1
+ local fstype=$(facet_fstype $facet)
+ local _dev
+ local dev
+ local poolname
+
+ if [ "${fstype}" == "zfs" ]; then
+ _dev=$(facet_active $facet)_dev
+ dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
+ poolname="${dev%%/*}" # poolname is string before "/"
+
+ if [ "${poolname}" == "" ]; then
+ echo "invalid dataset name: $dev"
+ return
+ fi
+ do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
+ do_facet $facet "$ZPOOL export ${poolname}"
+ do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
+ ${poolname}"
+ fi
+}
+
stop() {
local running
local facet=$1
shift
- HOST=`facet_active_host $facet`
+ local HOST=`facet_active_host $facet`
[ -z $HOST ] && echo stop: no host for $facet && return 0
- running=$(do_facet ${facet} "grep -c ${MOUNT%/*}/${facet}' ' /proc/mounts") || true
+ local mntpt=$(facet_mntpt $facet)
+ running=$(do_facet ${facet} "grep -c $mntpt' ' /proc/mounts") || true
if [ ${running} -ne 0 ]; then
- echo "Stopping ${MOUNT%/*}/${facet} (opts:$@)"
- do_facet ${facet} umount -d $@ ${MOUNT%/*}/${facet}
+ echo "Stopping $mntpt (opts:$@) on $HOST"
+ do_facet ${facet} umount -d $@ $mntpt
fi
# umount should block, but we should wait for unrelated obd's
setup_quota(){
local mntpt=$1
+ if [ "$USE_OFD" = "yes" ]; then
+ $LFS quotacheck $mntpt || error "quotacheck failed"
+ return
+ fi
+
# We need save the original quota_type params, and restore them after testing
# Suppose that quota type the same on mds and ost
}
zconf_mount() {
- local OPTIONS
local client=$1
local mnt=$2
- # Only supply -o to mount if we have options
- if [ -n "$MOUNTOPT" ]; then
- OPTIONS="-o $MOUNTOPT"
- fi
+ local OPTIONS=${3:-$MOUNTOPT}
+
local device=$MGSNID:/$FSNAME
if [ -z "$mnt" -o -z "$FSNAME" ]; then
echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
do_node $client mkdir -p $mnt
do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
- do_node $client "lctl set_param debug=\\\"$PTLDEBUG\\\";
- lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
- lctl set_param debug_mb=${DEBUG_SIZE}"
+ set_default_debug_nodes $client
return 0
}
local rc=0
for mnt in $mnts ; do
do_nodes $nodes "running=\\\$(grep -c $mnt' ' /proc/mounts);
-mpts=\\\$(mount | grep -w -c $mnt);
+mpts=\\\$(mount | grep -c $mnt' ');
if [ \\\$running -ne \\\$mpts ]; then
echo \\\$(hostname) env are INSANE!;
exit 1;
# FIXME: modify get_facets to display all facets wo params
local facets="$(get_facets OST),$(get_facets MDS),mgs"
local node
- local mnt
+ local mntpt
local facet
for facet in ${facets//,/ }; do
node=$(facet_host ${facet})
- mnt=${MOUNT%/*}/${facet}
- sanity_mount_check_nodes $node $mnt ||
+ mntpt=$(facet_mntpt $facet)
+ sanity_mount_check_nodes $node $mntpt ||
{ error "server $node environments are insane!"; return 1; }
done
}
local mnt=$2
local OPTIONS=${3:-$MOUNTOPT}
- # Only supply -o to mount if we have options
- if [ "$OPTIONS" ]; then
- OPTIONS="-o $OPTIONS"
- fi
local device=$MGSNID:/$FSNAME
if [ -z "$mnt" -o -z "$FSNAME" ]; then
echo Bad zconf mount command: opt=$OPTIONS dev=$device mnt=$mnt
exit \\\$rc" || return ${PIPESTATUS[0]}
echo "Started clients $clients: "
- do_nodes $clients "mount | grep -w $mnt"
+ do_nodes $clients "mount | grep $mnt' '"
- do_nodes $clients "lctl set_param debug=\\\"$PTLDEBUG\\\";
- lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
- lctl set_param debug_mb=${DEBUG_SIZE};"
+ set_default_debug_nodes $clients
return 0
}
do_nodes $clients "running=\\\$(grep -c $mnt' ' /proc/mounts);
if [ \\\$running -ne 0 ] ; then
echo Stopping client \\\$(hostname) $mnt opts:$force;
-lsof -t $mnt || need_kill=no;
+lsof $mnt || need_kill=no;
if [ "x$force" != "x" -a "x\\\$need_kill" != "xno" ]; then
pids=\\\$(lsof -t $mnt | sort -u);
if [ -n \\\"\\\$pids\\\" ]; then
kill -9 \\\$pids;
fi
fi;
-busy=\\\$(umount $force $mnt 2>&1 | grep -c "busy");
-if [ \\\$busy -ne 0 ] ; then
+while umount $force $mnt 2>&1 | grep -q "busy"; do
echo "$mnt is still busy, wait one second" && sleep 1;
- umount $force $mnt;
-fi
+done;
fi"
}
shutdown_node_hard () {
local host=$1
- local attempts=3
+ local attempts=$SHUTDOWN_ATTEMPTS
for i in $(seq $attempts) ; do
shutdown_node $host
sleep 1
- ping -w 3 -c 1 $host > /dev/null 2>&1 || return 0
+ wait_for_function --quiet "! ping -w 3 -c 1 $host" 5 1 && return 0
echo "waiting for $host to fail attempts=$attempts"
[ $i -lt $attempts ] || \
{ echo "$host still pingable after power down! attempts=$attempts" && return 1; }
echo $(comma_list $affected)
}
+facet_up () {
+ local facet=$1
+ local host=${2:-$(facet_host $facet)}
+
+ local label=$(convert_facet2label $facet)
+ do_node $host lctl dl | awk '{print $4}' | grep -q $label
+}
+
+facets_up_on_host () {
+ local host=$1
+ local facets=$(facets_on_host $host)
+ local affected_up
+
+ for facet in ${facets//,/ }; do
+ if $(facet_up $facet $host); then
+ affected_up="$affected_up $facet"
+ fi
+ done
+
+ echo $(comma_list $affected_up)
+}
+
shutdown_facet() {
local facet=$1
}
reboot_facet() {
- local facet=$1
- if [ "$FAILURE_MODE" = HARD ]; then
- reboot_node $(facet_active_host $facet)
- else
- sleep 10
- fi
+ local facet=$1
+ if [ "$FAILURE_MODE" = HARD ]; then
+ reboot_node $(facet_active_host $facet)
+ else
+ refresh_disk ${facet}
+ sleep 10
+ fi
}
boot_node() {
fi
}
-# recovery-scale functions
+facets_hosts () {
+ local facets=$1
+ local hosts
+
+ for facet in ${facets//,/ }; do
+ hosts=$(expand_list $hosts $(facet_host $facet) )
+ done
+
+ echo $hosts
+}
+
+_check_progs_installed () {
+ local progs=$@
+ local rc=0
+
+ for prog in $progs; do
+ if ! [ "$(which $prog)" -o "${!prog}" ]; then
+ echo $prog missing on $(hostname)
+ rc=1
+ fi
+ done
+ return $rc
+}
+
check_progs_installed () {
- local clients=$1
+ local nodes=$1
shift
- local progs=$@
- do_nodes $clients "PATH=:$PATH; status=true;
-for prog in $progs; do
- if ! [ \\\"\\\$(which \\\$prog)\\\" -o \\\"\\\${!prog}\\\" ]; then
- echo \\\$prog missing on \\\$(hostname);
- status=false;
- fi
-done;
-eval \\\$status"
+ do_rpc_nodes $nodes _check_progs_installed $@
}
-client_var_name() {
- echo __$(echo $1 | tr '-' 'X')
+# recovery-scale functions
+node_var_name() {
+ echo __$(echo $1 | tr '-' '_' | tr '.' '_')
}
start_client_load() {
local client=$1
local load=$2
- local var=$(client_var_name $client)_load
+ local var=$(node_var_name $client)_load
eval export ${var}=$load
do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
- BREAK_ON_ERROR=$BREAK_ON_ERROR \
- END_RUN_FILE=$END_RUN_FILE \
- LOAD_PID_FILE=$LOAD_PID_FILE \
- TESTSUITELOG=$TESTSUITELOG \
- run_${load}.sh" &
- CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $!"
+BREAK_ON_ERROR=$BREAK_ON_ERROR \
+END_RUN_FILE=$END_RUN_FILE \
+LOAD_PID_FILE=$LOAD_PID_FILE \
+TESTLOG_PREFIX=$TESTLOG_PREFIX \
+TESTNAME=$TESTNAME \
+DBENCH_LIB=$DBENCH_LIB \
+DBENCH_SRC=$DBENCH_SRC \
+run_${load}.sh" &
+ local ppid=$!
log "Started client load: ${load} on $client"
+ # get the children process IDs
+ local pids=$(ps --ppid $ppid -o pid= | xargs)
+ CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $ppid $pids"
return 0
}
sleep 2
}
-# only for remote client
+# only for remote client
check_client_load () {
local client=$1
- local var=$(client_var_name $client)_load
+ local var=$(node_var_name $client)_load
local TESTLOAD=run_${!var}.sh
ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
-
+
# bug 18914: try to connect several times not only when
# check ps, but while check_catastrophe also
local tries=3
check_client_load $client
rc=${PIPESTATUS[0]}
if [ "$rc" != 0 -a "$expectedfail" ]; then
- local var=$(client_var_name $client)_load
+ local var=$(node_var_name $client)_load
start_client_load $client ${!var}
echo "Restarted client load ${!var}: on $client. Checking ..."
check_client_load $client
if [ "$rc" != 0 ]; then
log "Client load failed to restart on node $client, rc=$rc"
# failure one client load means test fail
- # we do not need to check other
+ # we do not need to check other
return $rc
fi
else
fi
done
}
+
+# Start vmstat and save its process ID in a file.
+start_vmstat() {
+ local nodes=$1
+ local pid_file=$2
+
+ [ -z "$nodes" -o -z "$pid_file" ] && return 0
+
+ do_nodes $nodes \
+ "vmstat 1 > $TESTLOG_PREFIX.$TESTNAME.vmstat.\\\$(hostname -s).log \
+ 2>/dev/null </dev/null & echo \\\$! > $pid_file"
+}
+
+# Display the nodes on which client loads failed.
+print_end_run_file() {
+ local file=$1
+ local node
+
+ [ -s $file ] || return 0
+
+ echo "Found the END_RUN_FILE file: $file"
+ cat $file
+
+ # A client load will stop if it finds the END_RUN_FILE file.
+ # That does not mean the client load actually failed though.
+ # The first node in END_RUN_FILE is the one we are interested in.
+ read node < $file
+
+ if [ -n "$node" ]; then
+ local var=$(node_var_name $node)_load
+
+ local prefix=$TESTLOG_PREFIX
+ [ -n "$TESTNAME" ] && prefix=$prefix.$TESTNAME
+ local stdout_log=$prefix.run_${!var}_stdout.$node.log
+ local debug_log=$(echo $stdout_log | sed 's/\(.*\)stdout/\1debug/')
+
+ echo "Client load ${!var} failed on node $node:"
+ echo "$stdout_log"
+ echo "$debug_log"
+ fi
+}
+
+# Stop the process which had its PID saved in a file.
+stop_process() {
+ local nodes=$1
+ local pid_file=$2
+
+ [ -z "$nodes" -o -z "$pid_file" ] && return 0
+
+ do_nodes $nodes "test -f $pid_file &&
+ { kill -s TERM \\\$(cat $pid_file); rm -f $pid_file; }" || true
+}
+
+# Stop all client loads.
+stop_client_loads() {
+ local nodes=${1:-$CLIENTS}
+ local pid_file=$2
+
+ # stop the client loads
+ stop_process $nodes $pid_file
+
+ # clean up the processes that started them
+ [ -n "$CLIENT_LOAD_PIDS" ] && kill -9 $CLIENT_LOAD_PIDS 2>/dev/null || true
+}
# End recovery-scale functions
# verify that lustre actually cleaned up properly
local RESULT
local WAIT=0
- local sleep=5
+ local sleep=1
+ local print=10
while [ true ]; do
RESULT=$(do_node $node "$TEST")
if [ "$RESULT" == "$FINAL" ]; then
- echo "Updated after $WAIT sec: wanted '$FINAL' got '$RESULT'"
+ [ -z "$RESULT" -o $WAIT -le $sleep ] ||
+ echo "Updated after ${WAIT}s: wanted '$FINAL' got '$RESULT'"
return 0
fi
[ $WAIT -ge $MAX ] && break
- echo "Waiting $((MAX - WAIT)) secs for update"
+ [ $((WAIT % print)) -eq 0 ] &&
+ echo "Waiting $((MAX - WAIT)) secs for update"
WAIT=$((WAIT + sleep))
sleep $sleep
done
- echo "Update not seen after $MAX sec: wanted '$FINAL' got '$RESULT'"
+ echo "Update not seen after ${MAX}s: wanted '$FINAL' got '$RESULT'"
return 3
}
wait_update $(facet_active_host $facet) "$@"
}
+sync_all_data() {
+ do_node $(osts_nodes) "lctl set_param -n osd*.*OS*.force_sync 1" 2>&1 |
+ grep -v 'Found no match'
+}
+
wait_delete_completed () {
local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
rm $MOUNT/recon
}
+affected_facets () {
+ local facet=$1
+
+ local host=$(facet_active_host $facet)
+ local affected=$facet
+
+ if [ "$FAILURE_MODE" = HARD ]; then
+ affected=$(facets_up_on_host $host)
+ fi
+ echo $affected
+}
+
facet_failover() {
local facet=$1
local sleep_time=$2
echo "Failing $facet on node $host"
- local affected=$facet
-
- if [ "$FAILURE_MODE" = HARD ]; then
- affected=$(facets_on_host $host)
- fi
+ local affected=$(affected_facets $facet)
shutdown_facet $facet
fi
# FIXME; has to be changed to mount all facets concurrently
affected=$(exclude_items_from_list $affected mgs)
- for facet in ${affected//,/ }; do
- mount_facet $facet || error "Restart of $facet on node $host failed!"
- done
+ mount_facets $affected
}
obd_name() {
replay_barrier() {
local facet=$1
- do_facet $facet sync
+ do_facet $facet "sync; sync; sync"
df $MOUNT
+
+ # make sure there will be no seq change
+ local clients=${CLIENTS:-$HOSTNAME}
+ do_nodes $clients "f=${MOUNT}/fsa-\\\$(hostname); mcreate \\\$f; rm \\\$f"
+
local svc=${facet}_svc
do_facet $facet $LCTL --device %${!svc} notransno
do_facet $facet $LCTL --device %${!svc} readonly
replay_barrier_nodf() {
local facet=$1 echo running=${running}
- do_facet $facet sync
+ do_facet $facet "sync; sync; sync"
local svc=${facet}_svc
echo Replay barrier on ${!svc}
do_facet $facet $LCTL --device %${!svc} notransno
}
fail_abort() {
- local facet=$1
- stop $facet
- change_active $facet
- mount_facet $facet -o abort_recovery
- clients_up || echo "first df failed: $?"
- clients_up || error "post-failover df: $?"
+ local facet=$1
+ stop $facet
+ refresh_disk ${facet}
+ change_active $facet
+ wait_for_facet $facet
+ mount_facet $facet -o abort_recovery
+ clients_up || echo "first df failed: $?"
+ clients_up || error "post-failover df: $?"
}
do_lmc() {
exit 1
}
+host_nids_address() {
+ local nodes=$1
+ local kind=$2
+
+ if [ -n "$kind" ]; then
+ nids=$(do_nodes $nodes "$LCTL list_nids | grep $kind | cut -f 1 -d '@'")
+ else
+ nids=$(do_nodes $nodes "$LCTL list_nids all | cut -f 1 -d '@'")
+ fi
+ echo $nids
+}
+
h2name_or_ip() {
if [ "$1" = "client" -o "$1" = "'*'" ]; then echo \'*\'; else
echo $1"@$2"
}
declare -fx h2o2ib
+# This enables variables in cfg/"setup".sh files to support the pdsh HOSTLIST
+# expressions format. As a bonus we can then just pass in those variables
+# to pdsh. What this function does is take a HOSTLIST type string and
+# expand it into a space deliminated list for us.
+hostlist_expand() {
+ local hostlist=$1
+ local offset=$2
+ local myList
+ local item
+ local list
+
+ [ -z "$hostlist" ] && return
+
+ # Translate the case of [..],..,[..] to [..] .. [..]
+ list="${hostlist/],/] }"
+ front=${list%%[*}
+ [[ "$front" == *,* ]] && {
+ new="${list%,*} "
+ old="${list%,*},"
+ list=${list/${old}/${new}}
+ }
+
+ for item in $list; do
+ # Test if we have any []'s at all
+ if [ "$item" != "${item/\[/}" ]; then {
+ # Expand the [*] into list
+ name=${item%%[*}
+ back=${item#*]}
+
+ if [ "$name" != "$item" ]; then
+ group=${item#$name[*}
+ group=${group%%]*}
+
+ for range in ${group//,/ }; do
+ begin=${range%-*}
+ end=${range#*-}
+
+ # Number of leading zeros
+ padlen=${#begin}
+ padlen2=${#end}
+ end=$(echo $end | sed 's/0*//')
+ [[ -z "$end" ]] && end=0
+ [[ $padlen2 -gt $padlen ]] && {
+ [[ $padlen2 -eq ${#end} ]] && padlen2=0
+ padlen=$padlen2
+ }
+ begin=$(echo $begin | sed 's/0*//')
+ [ -z $begin ] && begin=0
+
+ for num in $(seq -f "%0${padlen}g" $begin $end); do
+ value="${name#*,}${num}${back}"
+ [ "$value" != "${value/\[/}" ] && {
+ value=$(hostlist_expand "$value")
+ }
+ myList="$myList $value"
+ done
+ done
+ fi
+ } else {
+ myList="$myList $item"
+ } fi
+ done
+ myList=${myList//,/ }
+ myList=${myList:1} # Remove first character which is a space
+
+ # Filter any duplicates without sorting
+ list="$myList "
+ myList="${list%% *}"
+
+ while [[ "$list" != ${myList##* } ]]; do
+ list=${list//${list%% *} /}
+ myList="$myList ${list%% *}"
+ done
+ myList="${myList%* }";
+
+ # We can select an object at a offset in the list
+ [ $# -eq 2 ] && {
+ cnt=0
+ for item in $myList; do
+ let cnt=cnt+1
+ [ $cnt -eq $offset ] && {
+ myList=$item
+ }
+ done
+ [ $(get_node_count $myList) -ne 1 ] && myList=""
+ }
+ echo $myList
+}
+
facet_host() {
local facet=$1
echo -n ${!varname}
}
+facet_failover_host() {
+ local facet=$1
+ local var
+
+ var=${facet}failover_HOST
+ if [ -n "${!var}" ]; then
+ echo ${!var}
+ return
+ fi
+
+ if [[ $facet == ost* ]]; then
+ var=ostfailover_HOST
+ if [ -n "${!var}" ]; then
+ echo ${!var}
+ return
+ fi
+ fi
+}
+
facet_active() {
local facet=$1
local activevar=${facet}active
# save the active host for this facet
local activevar=${facet}active
echo "$activevar=${!activevar}" > $TMP/$activevar
+ [[ $facet = mds1 ]] && combined_mgs_mds && \
+ echo "mgsactive=${!activevar}" > $TMP/mgsactive
local TO=`facet_active_host $facet`
echo "Failover $facet to $TO"
done
fi
if $VERBOSE; then
echo "CMD: $HOST $@" >&2
- $myPDSH $HOST $LCTL mark "$@" > /dev/null 2>&1 || :
+ $myPDSH $HOST "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
fi
if [ "$myPDSH" = "rsh" ]; then
# Outputs environment variable assignments that should be passed to remote nodes
get_env_vars() {
- local var
- local value
+ local var
+ local value
+ local facets=$(get_facets)
+ local facet
- for var in ${!MODOPTS_*}; do
- value=${!var}
- echo "${var}=\"$value\""
- done
+ for var in ${!MODOPTS_*}; do
+ value=${!var}
+ echo -n " ${var}=\"$value\""
+ done
+
+ echo -n " USE_OFD=$USE_OFD"
+
+ for facet in ${facets//,/ }; do
+ var=${facet}_FSTYPE
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ for var in MGSFSTYPE MDSFSTYPE OSTFSTYPE; do
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ if [ -n "$FSTYPE" ]; then
+ echo -n " FSTYPE=$FSTYPE"
+ fi
}
do_nodes() {
[ -z "$myPDSH" -o "$myPDSH" = "no_dsh" -o "$myPDSH" = "rsh" ] && \
echo "cannot run remote command on $rnodes with $myPDSH" && return 128
+ export FANOUT=$(get_node_count "${rnodes//,/ }")
if $VERBOSE; then
echo "CMD: $rnodes $@" >&2
- $myPDSH $rnodes $LCTL mark "$@" > /dev/null 2>&1 || :
+ $myPDSH $rnodes "$LCTL mark \"$@\"" > /dev/null 2>&1 || :
fi
# do not replace anything from pdsh output if -N is used
do_node $HOST "$@"
}
+# Function: do_facet_random_file $FACET $FILE $SIZE
+# Creates FILE with random content on the given FACET of given SIZE
+
+do_facet_random_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/urandom of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
+do_facet_create_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/zero of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
do_nodesv() {
do_nodes --verbose "$@"
}
# make sure its not already running
stop ${facet} -f
rm -f $TMP/${facet}active
+ [[ $facet = mds1 ]] && combined_mgs_mds && rm -f $TMP/mgsactive
do_facet ${facet} $MKFS $*
}
ostdevname() {
num=$1
DEVNAME=OSTDEV$num
- #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
- eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}}
+
+ local fstype=$(facet_fstype ost$num)
+
+ case $fstype in
+ ldiskfs )
+ #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
+ eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
+ zfs )
+ #dataset name is independent of vdev device names
+ eval DEVPTR=${FSNAME}-ost${num}/ost${num};;
+ * )
+ error "unknown fstype!";;
+ esac
+
echo -n $DEVPTR
}
+ostvdevname() {
+ num=$1
+ DEVNAME=OSTDEV$num
+
+ local fstype=$(facet_fstype ost$num)
+
+ case $fstype in
+ ldiskfs )
+ # vdevs are not supported by ldiskfs
+ eval VDEVPTR="";;
+ zfs )
+ #if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
+ eval VDEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
+ * )
+ error "unknown fstype!";;
+ esac
+
+ echo -n $VDEVPTR
+}
+
mdsdevname() {
num=$1
DEVNAME=MDSDEV$num
- #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
- eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}}
+
+ local fstype=$(facet_fstype mds$num)
+
+ case $fstype in
+ ldiskfs )
+ #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
+ eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
+ zfs )
+ #dataset name is independent of vdev device names
+ eval DEVPTR=${FSNAME}-mdt${num}/mdt${num};;
+ * )
+ error "unknown fstype!";;
+ esac
+
+ echo -n $DEVPTR
+}
+
+mdsvdevname() {
+ num=$1
+ DEVNAME=MDSDEV$num
+
+ local fstype=$(facet_fstype mds$num)
+
+ case $fstype in
+ ldiskfs )
+ # vdevs are not supported by ldiskfs
+ eval VDEVPTR="";;
+ zfs )
+ #if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
+ eval VDEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
+ * )
+ error "unknown fstype!";;
+ esac
+
+ echo -n $VDEVPTR
+}
+
+mgsdevname() {
+ DEVNAME=MGSDEV
+
+ local fstype=$(facet_fstype mds$num)
+
+ case $fstype in
+ ldiskfs )
+ #if $MGSDEV isn't defined, default is $MDSDEV1
+ eval DEVPTR=${!DEVNAME:=${MDSDEV1}};;
+ zfs )
+ #dataset name is independent of vdev device names
+ eval DEVPTR=${FSNAME}-mgs/mgs;;
+ * )
+ error "unknown fstype!";;
+ esac
+
echo -n $DEVPTR
}
+mgsvdevname() {
+ DEVNAME=MGSDEV
+
+ local fstype=$(facet_fstype mds$num)
+
+ case $fstype in
+ ldiskfs )
+ # vdevs are not supported by ldiskfs
+ eval VDEVPTR="";;
+ zfs )
+ #if $MGSDEV isn't defined, default is $MGSDEV1
+ eval VDEVPTR=${!DEVNAME:=${MDSDEV1}};;
+ * )
+ error "unknown fstype!";;
+ esac
+
+ echo -n $VDEVPTR
+}
+
+facet_mntpt () {
+ local facet=$1
+ [[ $facet = mgs ]] && combined_mgs_mds && facet="mds1"
+
+ local var=${facet}_MOUNT
+ eval mntpt=${!var:-${MOUNT%/*}/$facet}
+
+ echo -n $mntpt
+}
+
########
## MountConf setup
stop mds$num -f
rm -f ${TMP}/mds${num}active
done
+ combined_mgs_mds && rm -f $TMP/mgsactive
for num in `seq $OSTCOUNT`; do
stop ost$num -f
[[ $MDSDEV1 = $MGSDEV ]] && [[ $mds1_HOST = $mgs_HOST ]]
}
-mkfs_opts () {
- local facet=$1
+lower() {
+ echo -n "$1" | tr '[:upper:]' '[:lower:]'
+}
- local tgt=$(echo $facet | tr -d [:digit:] | tr "[:lower:]" "[:upper:]")
- local optvar=${tgt}_MKFS_OPTS
- local opt=${!optvar}
+upper() {
+ echo -n "$1" | tr '[:lower:]' '[:upper:]'
+}
- # FIXME: ! combo mgs/mds + mgsfailover is not supported yet
- [[ $facet = mgs ]] && echo $opt && return
+mkfs_opts() {
+ local facet=$1
+ local type=$(facet_type $facet)
+ local index=$(($(facet_number $facet) - 1))
+ local fstype=$(facet_fstype $facet)
+ local opts
+ local fs_mkfs_opts
+ local var
- # 1.
- # --failnode options
- local var=${facet}failover_HOST
- if [ x"${!var}" != x ] && [ x"${!var}" != x$(facet_host $facet) ] ; then
- local failnode=$(h2$NETTYPE ${!var})
- failnode="--failnode=$failnode"
- # options does not contain
- # or contains wrong --failnode=
- if [[ $opt != *${failnode}* ]]; then
- opt=$(echo $opt | sed 's/--failnode=.* / /')
- opt="$opt $failnode"
- fi
- fi
+ if [ $type == MGS ] && combined_mgs_mds; then
+ return 1
+ fi
+
+ if [ $type == MGS ] || ( [ $type == MDS ] && combined_mgs_mds ); then
+ opts="--mgs"
+ else
+ opts="--mgsnode=$MGSNID"
+ fi
+
+ if [ $type != MGS ]; then
+ opts+=" --fsname=$FSNAME --$(lower ${type/MDS/MDT}) --index=$index"
+ fi
+
+ var=${facet}failover_HOST
+ if [ -n "${!var}" ] && [ ${!var} != $(facet_host $facet) ]; then
+ opts+=" --failnode=$(h2$NETTYPE ${!var})"
+ fi
+
+ opts+=${TIMEOUT:+" --param=sys.timeout=$TIMEOUT"}
+ opts+=${LDLM_TIMEOUT:+" --param=sys.ldlm_timeout=$LDLM_TIMEOUT"}
+
+ if [ $type == MDS ]; then
+ opts+=${SECLEVEL:+" --param=mdt.sec_level"}
+ opts+=${MDSCAPA:+" --param-mdt.capa=$MDSCAPA"}
+ opts+=${STRIPE_BYTES:+" --param=lov.stripesize=$STRIPE_BYTES"}
+ opts+=${STRIPES_PER_OBJ:+" --param=lov.stripecount=$STRIPES_PER_OBJ"}
+ opts+=${L_GETIDENTITY:+" --param=mdt.identity_upcall=$L_GETIDENTITY"}
+
+ if [ $fstype == ldiskfs ]; then
+ opts+=${IAMDIR:+" --iam-dir"}
+
+ fs_mkfs_opts+=${MDSJOURNALSIZE:+" -J size=$MDSJOURNALSIZE"}
+ fs_mkfs_opts+=${MDSISIZE:+" -i $MDSISIZE"}
+ fi
+ fi
- # 2.
- # --mgsnode options
- # no additional mkfs mds "--mgsnode" option for this configuration
- if [[ $facet = mds ]] && combined_mgs_mds; then
- echo $opt
- return
- fi
+ if [ $type == OST ]; then
+ opts+=${SECLEVEL:+" --param=ost.sec_level"}
+ opts+=${OSSCAPA:+" --param=ost.capa=$OSSCAPA"}
- # additional mkfs "--mgsnode"
- local mgsnode="--mgsnode=$MGSNID"
- opt=${opt//$mgsnode }
- for nid in ${MGSNID//:/ }; do
- local mgsnode="--mgsnode=$nid"
- # options does not contain
- # --mgsnode=$nid
- if [[ $opt != *${mgsnode}" "* ]]; then
- opt="$opt --mgsnode=$nid"
- fi
- done
+ if [ $fstype == ldiskfs ]; then
+ fs_mkfs_opts+=${OSTJOURNALSIZE:+" -J size=$OSTJOURNALSIZE"}
+ fi
+ fi
- echo $opt
-}
+ opts+=" --backfstype=$fstype"
-formatall() {
- if [ "$IAMDIR" == "yes" ]; then
- MDS_MKFS_OPTS="$MDS_MKFS_OPTS --iam-dir"
- fi
+ var=${type}SIZE
+ if [ -n "${!var}" ]; then
+ opts+=" --device-size=${!var}"
+ fi
- [ "$FSTYPE" ] && FSTYPE_OPT="--backfstype $FSTYPE"
+ var=$(upper $fstype)_MKFS_OPTS
+ fs_mkfs_opts+=${!var:+" ${!var}"}
- stopall
- # We need ldiskfs here, may as well load them all
- load_modules
- [ "$CLIENTONLY" ] && return
- echo Formatting mgs, mds, osts
- if ! combined_mgs_mds ; then
- add mgs $(mkfs_opts mgs) $FSTYPE_OPT --reformat $MGSDEV || exit 10
- fi
+ var=${type}_FS_MKFS_OPTS
+ fs_mkfs_opts+=${!var:+" ${!var}"}
- for num in `seq $MDSCOUNT`; do
- echo "Format mds$num: $(mdsdevname $num)"
- if $VERBOSE; then
- add mds$num $(mkfs_opts mds) $FSTYPE_OPT --reformat $(mdsdevname $num) || exit 10
- else
- add mds$num $(mkfs_opts mds) $FSTYPE_OPT --reformat $(mdsdevname $num) > /dev/null || exit 10
- fi
- done
+ if [ -n "${fs_mkfs_opts## }" ]; then
+ opts+=" --mkfsoptions=\\\"${fs_mkfs_opts## }\\\""
+ fi
- # the ost-s could have different OST_MKFS_OPTS
- # because of different failnode-s
- for num in `seq $OSTCOUNT`; do
- echo "Format ost$num: $(ostdevname $num)"
- if $VERBOSE; then
- add ost$num $(mkfs_opts ost${num}) $FSTYPE_OPT --reformat `ostdevname $num` || exit 10
- else
- add ost$num $(mkfs_opts ost${num}) $FSTYPE_OPT --reformat `ostdevname $num` > /dev/null || exit 10
- fi
- done
+ var=${type}OPT
+ opts+=${!var:+" ${!var}"}
+
+ echo -n "$opts"
+}
+
+formatall() {
+ local quiet
+
+ if ! $VERBOSE; then
+ quiet=yes
+ fi
+
+ stopall
+ # We need ldiskfs here, may as well load them all
+ load_modules
+ [ "$CLIENTONLY" ] && return
+ echo Formatting mgs, mds, osts
+ if ! combined_mgs_mds ; then
+ echo "Format mgs: $(mgsdevname)"
+ add mgs $(mkfs_opts mgs) --reformat $(mgsdevname) \
+ $(mgsvdevname) ${quiet:+>/dev/null} || exit 10
+ fi
+
+ for num in `seq $MDSCOUNT`; do
+ echo "Format mds$num: $(mdsdevname $num)"
+ add mds$num $(mkfs_opts mds$num) --reformat \
+ $(mdsdevname $num) $(mdsvdevname $num) \
+ ${quiet:+>/dev/null} || exit 10
+ done
+
+ for num in `seq $OSTCOUNT`; do
+ echo "Format ost$num: $(ostdevname $num)"
+ add ost$num $(mkfs_opts ost$num) --reformat \
+ $(ostdevname $num) $(ostvdevname ${num}) \
+ ${quiet:+>/dev/null} || exit 10
+ done
}
mount_client() {
echo $WRITECONF | grep -q "writeconf" && \
writeconf_all
if ! combined_mgs_mds ; then
- start mgs $MGSDEV $MGS_MOUNT_OPTS
+ start mgs $(mgsdevname) $MGS_MOUNT_OPTS
fi
for num in `seq $MDSCOUNT`; do
[ "$DAEMONFILE" ] && $LCTL debug_daemon start $DAEMONFILE $DAEMONSIZE
mount_client $MOUNT
[ -n "$CLIENTS" ] && zconf_mount_clients $CLIENTS $MOUNT
+ clients_up
if [ "$MOUNT_2" ]; then
mount_client $MOUNT2
eval export ${facet}_opt=\"$@\"
local dev=${facet}_dev
- local label=$(do_facet ${facet} "$E2LABEL ${!dev}")
+ local label=$(devicelabel ${facet} ${!dev})
[ -z "$label" ] && echo no label for ${!dev} && exit 1
eval export ${facet}_svc=${label}
else
eval export ${facet}failover_dev=$device
fi
+
+ # get mount point of already mounted device
+ # is facet_dev is already mounted then use the real
+ # mount point of this facet; otherwise use $(facet_mntpt $facet)
+ # i.e. ${facet}_MOUNT if specified by user or default
+ local mntpt=$(do_facet ${facet} cat /proc/mounts | \
+ awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
+ if [ -z $mntpt ]; then
+ mntpt=$(facet_mntpt $facet)
+ fi
+ eval export ${facet}_MOUNT=$mntpt
}
init_facets_vars () {
done
fi
- combined_mgs_mds || init_facet_vars mgs $MGSDEV $MGS_MOUNT_OPTS
+ combined_mgs_mds || init_facet_vars mgs $(mgsdevname) $MGS_MOUNT_OPTS
remote_ost_nodsh && return
}
init_param_vars () {
- if ! remote_ost_nodsh && ! remote_mds_nodsh; then
- export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
- export OSTVER=$(do_facet ost1 "lctl get_param version" | cut -d. -f1,2)
- export CLIVER=$(lctl get_param version | cut -d. -f 1,2)
- fi
-
- remote_mds_nodsh ||
- TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
-
- log "Using TIMEOUT=$TIMEOUT"
-
- osc_ensure_active $SINGLEMDS $TIMEOUT
- osc_ensure_active client $TIMEOUT
-
- if [ $QUOTA_AUTO -ne 0 ]; then
- if [ "$ENABLE_QUOTA" ]; then
- echo "enable quota as required"
- setup_quota $MOUNT || return 2
- else
- echo "disable quota as required"
- $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
- fi
- fi
-
- return 0
+ remote_mds_nodsh ||
+ TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
+
+ log "Using TIMEOUT=$TIMEOUT"
+
+ osc_ensure_active $SINGLEMDS $TIMEOUT
+ osc_ensure_active client $TIMEOUT
+
+ local jobid_var
+ if [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ]; then
+ jobid_var="none"
+ elif [ $JOBSTATS_AUTO -ne 0 ]; then
+ echo "enable jobstats, set job scheduler as $JOBID_VAR"
+ jobid_var=$JOBID_VAR
+ else
+ jobid_var=`$LCTL get_param -n jobid_var`
+ if [ $jobid_var != "disable" ]; then
+ echo "disable jobstats as required"
+ jobid_var="disable"
+ else
+ jobid_var="none"
+ fi
+ fi
+
+ if [ $jobid_var == $JOBID_VAR -o $jobid_var == "disable" ]; then
+ do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$jobid_var
+ wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
+ $jobid_var || return 1
+ fi
+
+ if [ $QUOTA_AUTO -ne 0 ]; then
+ if [ "$ENABLE_QUOTA" ]; then
+ echo "enable quota as required"
+ setup_quota $MOUNT || return 2
+ else
+ echo "disable quota as required"
+ $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
+ fi
+ fi
+ return 0
}
nfs_client_mode () {
# FIXME: remove hostname when 19215 fixed
do_nodes $clients "echo \\\$(hostname); grep ' '$MOUNT' ' /proc/mounts"
declare -a nfsexport=(`grep ' '$MOUNT' ' /proc/mounts | awk '{print $1}' | awk -F: '{print $1 " " $2}'`)
+ if [[ ${#nfsexport[@]} -eq 0 ]]; then
+ error_exit NFSCLIENT=$NFSCLIENT mode, but no NFS export found!
+ fi
do_nodes ${nfsexport[0]} "echo \\\$(hostname); df -T ${nfsexport[1]}"
return
fi
init_facets_vars
init_param_vars
- do_nodes $(comma_list $(nodes_list)) "lctl set_param debug=\\\"$PTLDEBUG\\\";
- lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
- lctl set_param debug_mb=${DEBUG_SIZE};
- sync"
+ set_default_debug_nodes $(comma_list $(nodes_list))
fi
- init_gss
- set_flavor_all $SEC
+ init_gss
+ if $GSS; then
+ set_flavor_all $SEC
+ fi
- if [ "$ONLY" == "setup" ]; then
- exit 0
- fi
+ if [ "$ONLY" == "setup" ]; then
+ exit 0
+ fi
}
restore_mount () {
# Get all of the server target devices from a given server node and type.
get_mnt_devs() {
- local node=$1
- local type=$2
- local obd_type
- local devs
- local dev
-
- case $type in
- mdt) obd_type="osd" ;;
- ost) obd_type="obdfilter" ;; # needs to be fixed when OST also uses an OSD
- *) echo "invalid server type" && return 1 ;;
- esac
-
- devs=$(do_node $node "lctl get_param -n $obd_type*.*.mntdev")
- for dev in $devs; do
- case $dev in
- *loop*) do_node $node "losetup $dev" | \
- sed -e "s/.*(//" -e "s/).*//" ;;
- *) echo $dev ;;
- esac
- done
+ local node=$1
+ local type=$2
+ local devs
+ local dev
+
+ if [ "$type" == ost ]; then
+ devs=$(get_obdfilter_param $node "" mntdev)
+ else
+ devs=$(do_node $node \
+ "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
+ fi
+ for dev in $devs; do
+ case $dev in
+ *loop*) do_node $node "losetup $dev" | \
+ sed -e "s/.*(//" -e "s/).*//" ;;
+ *) echo $dev ;;
+ esac
+ done
}
# Get all of the server target devices.
run_e2fsck() {
local node=$1
local target_dev=$2
- local ostidx=$3
- local ostdb_opt=$4
+ local extra_opts=$3
df > /dev/null # update statfs data on disk
- local cmd="$E2FSCK -d -v -f -n $MDSDB_OPT $ostdb_opt $target_dev"
+ local cmd="$E2FSCK -d -v -t -t -f -n $extra_opts $target_dev"
echo $cmd
local rc=0
do_node $node $cmd || rc=$?
return 0
}
+# verify a directory is shared among nodes.
+check_shared_dir() {
+ local dir=$1
+
+ [ -z "$dir" ] && return 1
+ do_rpc_nodes $(comma_list $(nodes_list)) check_logdir $dir
+ check_write_access $dir || return 1
+ return 0
+}
+
# Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
generate_db() {
local i
local ostidx
local dev
- local tmp_file
- [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
- tmp_file=$(mktemp -p $SHARED_DIRECTORY ||
- error "fail to create file in $SHARED_DIRECTORY")
+ [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
+ { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
+
+ check_shared_dir $SHARED_DIRECTORY ||
+ error "$SHARED_DIRECTORY isn't a shared directory"
- # make sure everything gets to the backing store
- local list=$(comma_list $CLIENTS $(facet_host $SINGLEMDS) $(osts_nodes))
- do_nodes $list "sync; sleep 2; sync"
+ export MDSDB=$SHARED_DIRECTORY/mdsdb
+ export OSTDB=$SHARED_DIRECTORY/ostdb
- do_nodes $list ls $tmp_file || \
- error "$SHARED_DIRECTORY is not a shared directory"
- rm $tmp_file
+ [ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
- run_e2fsck $(mdts_nodes) $MDTDEV
+ run_e2fsck $(mdts_nodes) $MDTDEV "--mdsdb $MDSDB"
i=0
ostidx=0
OSTDB_LIST=""
for node in $(osts_nodes); do
for dev in ${OSTDEVS[i]}; do
- local ostdb_opt=`eval echo $OSTDB_OPT`
- run_e2fsck $node $dev $ostidx "$ostdb_opt"
+ run_e2fsck $node $dev "--mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
OSTDB_LIST="$OSTDB_LIST $OSTDB-$ostidx"
ostidx=$((ostidx + 1))
done
}
check_and_cleanup_lustre() {
- if [ "$LFSCK_ALWAYS" = "yes" ]; then
+ if [ "$LFSCK_ALWAYS" = "yes" -a "$TESTSUITE" != "lfsck" ]; then
get_svr_devs
generate_db
- if [ "$SKIP_LFSCK" == "no" ]; then
- run_lfsck
- else
- echo "skip lfsck"
- fi
+ run_lfsck
fi
if is_mounted $MOUNT; then
- [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]*
+ [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
+ error "remove sub-test dirs failed"
[ "$ENABLE_QUOTA" ] && restore_quota_type || true
fi
#######
# General functions
-check_network() {
- local NETWORK=0
- local WAIT=0
- local MAX=$2
- while [ $NETWORK -eq 0 ]; do
- if ping -c 1 -w 3 $1 > /dev/null; then
- NETWORK=1
- else
- WAIT=$((WAIT + 5))
- echo "waiting for $1, $((MAX - WAIT)) secs left"
- sleep 5
- fi
- if [ $WAIT -gt $MAX ]; then
- echo "Network not available"
- exit 1
- fi
+wait_for_function () {
+ local quiet=""
+
+ # suppress fn both stderr and stdout
+ if [ "$1" = "--quiet" ]; then
+ shift
+ quiet=" > /dev/null 2>&1"
+
+ fi
+
+ local fn=$1
+ local max=${2:-900}
+ local sleep=${3:-5}
+
+ local wait=0
+
+ while true; do
+
+ eval $fn $quiet && return 0
+
+ wait=$((wait + sleep))
+ [ $wait -lt $max ] || return 1
+ echo waiting $fn, $((max - wait)) secs left ...
+ sleep $sleep
done
}
-check_port() {
- while( !($DSH2 $1 "netstat -tna | grep -q $2") ) ; do
- sleep 9
- done
+
+check_network() {
+ local host=$1
+ local max=$2
+ local sleep=${3:-5}
+
+ echo `date +"%H:%M:%S (%s)"` waiting for $host network $max secs ...
+ if ! wait_for_function --quiet "ping -c 1 -w 3 $host" $max $sleep ; then
+ echo "Network not available!"
+ exit 1
+ fi
+
+ echo `date +"%H:%M:%S (%s)"` network interface is UP
}
no_dsh() {
fi
}
-at_max_get() {
+at_get() {
local facet=$1
+ local at=$2
- # suppose that all ost-s has the same at_max set
- if [ $facet == "ost" ]; then
- do_facet ost1 "lctl get_param -n at_max"
- else
- do_facet $facet "lctl get_param -n at_max"
- fi
+ # suppose that all ost-s have the same $at value set
+ [ $facet != "ost" ] || facet=ost1
+
+ do_facet $facet "lctl get_param -n $at"
+}
+
+at_max_get() {
+ at_get $1 at_max
+}
+
+at_min_get() {
+ at_get $1 at_min
}
at_max_set() {
shift
local facet
+ local hosts
for facet in $@; do
if [ $facet == "ost" ]; then
- for i in `seq $OSTCOUNT`; do
- do_facet ost$i "lctl set_param at_max=$at_max"
-
- done
+ facet=$(get_facets OST)
elif [ $facet == "mds" ]; then
- for i in `seq $MDSCOUNT`; do
- do_facet mds$i "lctl set_param at_max=$at_max"
- done
- else
- do_facet $facet "lctl set_param at_max=$at_max"
+ facet=$(get_facets MDS)
fi
+ hosts=$(expand_list $hosts $(facets_hosts $facet))
done
+
+ do_nodes $hosts lctl set_param at_max=$at_max
}
##################################
drop_ldlm_cancel() {
#define OBD_FAIL_LDLM_CANCEL 0x304
- RC=0
- do_facet client lctl set_param fail_loc=0x304
- do_facet client "$@" || RC=$?
- do_facet client lctl set_param fail_loc=0
- return $RC
+ local RC=0
+ local list=$(comma_list $(mdts_nodes) $(osts_nodes))
+ do_nodes $list lctl set_param fail_loc=0x304
+
+ do_facet client "$@" || RC=$?
+
+ do_nodes $list lctl set_param fail_loc=0
+ return $RC
}
drop_bl_callback() {
debugrestore
}
+# prints bash call stack
+log_trace_dump() {
+ echo " Trace dump:"
+ for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
+ local s=${BASH_SOURCE[$i]}
+ local l=${BASH_LINENO[$i-1]}
+ local f=${FUNCNAME[$i]}
+ echo " = $s:$l:$f()"
+ done
+}
+
##################################
# Test interface
##################################
fi
log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
+ log_trace_dump
+ mkdir -p $LOGDIR
# We need to dump the logs on all nodes
if $dump; then
gather_logs $(comma_list $(nodes_list))
echo "$@" > $LOGDIR/err
}
+exit_status () {
+ local status=0
+ local log=$TESTSUITELOG
+
+ [ -f "$log" ] && grep -q FAIL $log && status=1
+ exit $status
+}
+
error() {
error_noexit "$@"
exit 1
error_noexit "$@"
}
+error_and_remount() {
+ error_noexit "$@"
+ remount_client $MOUNT
+ exit 1
+}
+
skip_env () {
$FAIL_ON_SKIP_ENV && error false $@ || skip $@
}
-skip () {
- echo
- log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
- [ "$TESTSUITELOG" ] && \
- echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
+skip() {
+ echo
+ log " SKIP: $TESTSUITE $TESTNAME $@"
+
+ if [[ -n "$ALWAYS_SKIPPED" ]]; then
+ skip_logged $TESTNAME "$@"
+ else
+ mkdir -p $LOGDIR
+ echo "$@" > $LOGDIR/skip
+ fi
+
+ [[ -n "$TESTSUITELOG" ]] &&
+ echo "$TESTSUITE: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
}
build_test_filter() {
log "excepting tests: `echo $EXCEPT $ALWAYS_EXCEPT`"
[ "$EXCEPT_SLOW" ] && \
log "skipping tests SLOW=no: `echo $EXCEPT_SLOW`"
- for E in $EXCEPT $ALWAYS_EXCEPT; do
+ for E in $EXCEPT; do
eval EXCEPT_${E}=true
done
+ for E in $ALWAYS_EXCEPT; do
+ eval EXCEPT_ALWAYS_${E}=true
+ done
for E in $EXCEPT_SLOW; do
eval EXCEPT_SLOW_${E}=true
done
# print a newline if the last test was skipped
export LAST_SKIPPED=
+export ALWAYS_SKIPPED=
#
# Main entry into test-framework. This is called with the name and
# description of a test. The name is used to find the function to run
echo -n "."
return 0
fi
+
+ LAST_SKIPPED="y"
+ ALWAYS_SKIPPED="y"
testname=EXCEPT_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1"
return 0
fi
testname=EXCEPT_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
return 0
fi
+ testname=EXCEPT_ALWAYS_$1
+ if [ ${!testname}x != x ]; then
+ TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
+ return 0
+ fi
+ testname=EXCEPT_ALWAYS_$base
+ if [ ${!testname}x != x ]; then
+ TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
+ return 0
+ fi
testname=EXCEPT_SLOW_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1"
return 0
fi
testname=EXCEPT_SLOW_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
return 0
fi
LAST_SKIPPED=
+ ALWAYS_SKIPPED=
run_one_logged $1 "$2"
return $?
return 1
}
+complete () {
+ equals_msg $1 test complete, duration $2 sec
+ [ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
+ echo duration $2 >>$TESTSUITELOG
+}
+
pass() {
- # Set TEST_STATUS here; will be used for logging the result
- if [ -f $LOGDIR/err ]; then
- TEST_STATUS="FAIL"
- else
- TEST_STATUS="PASS"
- fi
- echo $TEST_STATUS " " $@
+ # Set TEST_STATUS here. It will be used for logging the result.
+ TEST_STATUS="PASS"
+
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_STATUS="FAIL"
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_STATUS="SKIP"
+ fi
+ echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
}
check_mds() {
- FFREE=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filesfree | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
- FTOTAL=$(do_node $SINGLEMDS lctl get_param -n osd.*MDT*.filestotal | awk 'BEGIN{avail=0}; {avail+=$1}; END{print avail}')
+ local FFREE=$(do_node $SINGLEMDS \
+ lctl get_param -n osd*.*MDT*.filesfree | calc_sum)
+ local FTOTAL=$(do_node $SINGLEMDS \
+ lctl get_param -n osd*.*MDT*.filestotal | calc_sum)
+
[ $FFREE -ge $FTOTAL ] && error "files free $FFREE > total $FTOTAL" || true
}
run_one() {
local testnum=$1
local message=$2
- tfile=f${testnum}
+ tfile=f.${TESTSUITE}.${testnum}
export tdir=d0.${TESTSUITE}/d${base}
export TESTNAME=test_$testnum
local SAVE_UMASK=`umask`
# - test result is saved to data file
#
run_one_logged() {
- local BEFORE=`date +%s`
- local TEST_ERROR
- local name=${TESTSUITE}.test_${1}.test_log.$(hostname).log
- local test_log=$LOGDIR/$name
- rm -rf $LOGDIR/err
+ local BEFORE=`date +%s`
+ local TEST_ERROR
+ local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
+ local test_log=$LOGDIR/$name
+ rm -rf $LOGDIR/err
+ rm -rf $LOGDIR/skip
+ local SAVE_UMASK=`umask`
+ umask 0022
- echo
- log_sub_test_begin test_${1}
- (run_one $1 "$2") 2>&1 | tee $test_log
- local RC=${PIPESTATUS[0]}
+ echo
+ log_sub_test_begin test_${1}
+ (run_one $1 "$2") 2>&1 | tee -i $test_log
+ local RC=${PIPESTATUS[0]}
- [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
- echo "test_$1 returned $RC" | tee $LOGDIR/err
+ [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
+ echo "test_$1 returned $RC" | tee $LOGDIR/err
- duration=$((`date +%s` - $BEFORE))
- pass "(${duration}s)"
- [ -f $LOGDIR/err ] && TEST_ERROR=$(cat $LOGDIR/err)
- log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
+ duration=$((`date +%s` - $BEFORE))
+ pass "$1" "(${duration}s)"
- if [ -f $LOGDIR/err ]; then
- $FAIL_ON_ERROR && exit $RC
- fi
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_ERROR=$(cat $LOGDIR/err)
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_ERROR=$(cat $LOGDIR/skip)
+ fi
+ log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
- return 0
+ if [ -f $LOGDIR/err ]; then
+ $FAIL_ON_ERROR && exit $RC
+ fi
+
+ umask $SAVE_UMASK
+
+ return 0
+}
+
+#
+# Print information of skipped tests to result.yml
+#
+skip_logged(){
+ log_sub_test_begin $1
+ shift
+ log_sub_test_end "SKIP" "0" "0" "$@"
}
canonical_path() {
(cd `dirname $1`; echo $PWD/`basename $1`)
}
-sync_clients() {
- [ -d $DIR1 ] && cd $DIR1 && sync; sleep 1; sync
- [ -d $DIR2 ] && cd $DIR2 && sync; sleep 1; sync
- cd $SAVE_PWD
-}
check_grant() {
export base=`basetest $1`
[ ${!testname}x == x ] && return 0
echo -n "checking grant......"
- cd $SAVE_PWD
- # write some data to sync client lost_grant
- rm -f $DIR1/${tfile}_check_grant_* 2>&1
- for i in `seq $OSTCOUNT`; do
- $LFS setstripe $DIR1/${tfile}_check_grant_$i -i $(($i -1)) -c 1
- dd if=/dev/zero of=$DIR1/${tfile}_check_grant_$i bs=4k \
- count=1 > /dev/null 2>&1
- done
- # sync all the data and make sure no pending data on server
- sync_clients
-
- #get client grant and server grant
- client_grant=0
- for d in `lctl get_param -n osc.*.cur_grant_bytes`; do
- client_grant=$((client_grant + $d))
- done
- server_grant=0
- for d in `lctl get_param -n obdfilter.*.tot_granted`; do
- server_grant=$((server_grant + $d))
- done
- # cleanup the check_grant file
- for i in `seq $OSTCOUNT`; do
- rm $DIR1/${tfile}_check_grant_$i
- done
+ local clients=$CLIENTS
+ [ -z $clients ] && clients=$(hostname)
+
+ # sync all the data and make sure no pending data on server
+ do_nodes $clients sync
+
+ # get client grant
+ client_grant=`do_nodes $clients \
+ "$LCTL get_param -n osc.${FSNAME}-*.cur_*grant_bytes" | \
+ awk '{total += $1} END{print total}'`
+
+ # get server grant
+ server_grant=`do_nodes $(comma_list $(osts_nodes)) \
+ "$LCTL get_param -n obdfilter.${FSNAME}-OST*.tot_granted" |
+ awk '{total += $1} END{print total}'`
+
+ # check whether client grant == server grant
+ if [ $client_grant -ne $server_grant ]; then
+ echo "failed: client:${client_grant} server: ${server_grant}."
+ do_nodes $(comma_list $(osts_nodes)) \
+ "$LCTL get_param obdfilter.${FSNAME}-OST*.tot*"
+ do_nodes $clients "$LCTL get_param osc.${FSNAME}-*.cur_*_bytes"
+ return 1
+ else
+ echo "pass: client:${client_grant} server: ${server_grant}"
+ fi
- #check whether client grant == server grant
- if [ $client_grant != $server_grant ]; then
- echo "failed: client:${client_grant} server: ${server_grant}"
- return 1
- else
- echo "pass"
- fi
}
########################
echo $ost
}
+ostuuid_from_index()
+{
+ $LFS osts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
+}
+
+ostname_from_index() {
+ local uuid=$(ostuuid_from_index $1)
+ echo ${uuid/_UUID/}
+}
+
+index_from_ostuuid()
+{
+ $LFS osts $2 | sed -ne "/${1}/s/\(.*\): .* .*$/\1/p"
+}
+
+mdtuuid_from_index()
+{
+ $LFS mdts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
+}
+
remote_node () {
local node=$1
[ "$node" != "$(hostname)" ]
init_clients_lists () {
# Sanity check: exclude the local client from RCLIENTS
- local rclients=$(echo " $RCLIENTS " | sed -re "s/\s+$HOSTNAME\s+/ /g")
+ local clients=$(hostlist_expand "$RCLIENTS")
+ local rclients=$(exclude_items_from_list "$clients" $HOSTNAME)
# Sanity check: exclude the dup entries
- rclients=$(for i in $rclients; do echo $i; done | sort -u)
+ RCLIENTS=$(for i in ${rclients//,/ }; do echo $i; done | sort -u)
- local clients="$SINGLECLIENT $HOSTNAME $rclients"
+ clients="$SINGLECLIENT $HOSTNAME $RCLIENTS"
# Sanity check: exclude the dup entries from CLIENTS
# for those configs which has SINGLCLIENT set to local client
clients=$(for i in $clients; do echo $i; done | sort -u)
- CLIENTS=`comma_list $clients`
- local -a remoteclients=($rclients)
+ CLIENTS=$(comma_list $clients)
+ local -a remoteclients=($RCLIENTS)
for ((i=0; $i<${#remoteclients[@]}; i++)); do
varname=CLIENT$((i + 2))
eval $varname=${remoteclients[i]}
}
check_versions () {
- [ "$MDSVER" = "$CLIVER" -a "$OSTVER" = "$CLIVER" ]
+ [ "$(lustre_version_code client)" = "$(lustre_version_code $SINGLEMDS)" -a \
+ "$(lustre_version_code client)" = "$(lustre_version_code ost1)" ]
}
get_node_count() {
do_nodev $nfsserver lfs setstripe "$@"
}
+# Check and add a test group.
+add_group() {
+ local group_id=$1
+ local group_name=$2
+ local rc=0
+
+ local gid=$(getent group $group_name | cut -d: -f3)
+ if [[ -n "$gid" ]]; then
+ [[ "$gid" -eq "$group_id" ]] || {
+ error_noexit "inconsistent group ID:" \
+ "new: $group_id, old: $gid"
+ rc=1
+ }
+ else
+ groupadd -g $group_id $group_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
+# Check and add a test user.
+add_user() {
+ local user_id=$1
+ shift
+ local user_name=$1
+ shift
+ local group_name=$1
+ shift
+ local home=$1
+ shift
+ local opts="$@"
+ local rc=0
+
+ local uid=$(getent passwd $user_name | cut -d: -f3)
+ if [[ -n "$uid" ]]; then
+ if [[ "$uid" -eq "$user_id" ]]; then
+ local dir=$(getent passwd $user_name | cut -d: -f6)
+ if [[ "$dir" != "$home" ]]; then
+ mkdir -p $home
+ usermod -d $home $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+ else
+ error_noexit "inconsistent user ID:" \
+ "new: $user_id, old: $uid"
+ rc=1
+ fi
+ else
+ mkdir -p $home
+ useradd -M -u $user_id -d $home -g $group_name $opts $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
check_runas_id_ret() {
local myRC=0
local myRUNAS_UID=$1
# Run multiop in the background, but wait for it to print
# "PAUSING" to its stdout before returning from this function.
multiop_bg_pause() {
- MULTIOP_PROG=${MULTIOP_PROG:-multiop}
+ MULTIOP_PROG=${MULTIOP_PROG:-$MULTIOP}
FILE=$1
ARGS=$2
}
mdsrate_inodes_available () {
- echo $(($(inodes_available) - 1))
+ local min_inodes=$(inodes_available)
+ echo $((min_inodes * 99 / 100))
}
# reset llite stat counters
fi
}
-# $1 node
-# $2 file
-# $3 $RUNAS
-get_stripe_info() {
- local tmp_file
-
- stripe_size=0
- stripe_count=0
- stripe_index=0
- tmp_file=$(mktemp)
-
- do_facet $1 $3 lfs getstripe -v $2 > $tmp_file
-
- stripe_size=`awk '$1 ~ /size/ {print $2}' $tmp_file`
- stripe_count=`awk '$1 ~ /count/ {print $2}' $tmp_file`
- stripe_index=`awk '$1 ~ /stripe_offset/ {print $2}' $tmp_file`
- rm -f $tmp_file
-}
-
# CMD: determine mds index where directory inode presents
get_mds_dir () {
local dir=$1
}
get_clientosc_proc_path() {
- local ost=$1
-
- echo "${1}-osc-*"
+ echo "${1}-osc-[^M]*"
}
get_lustre_version () {
local facet=${1:-"$SINGLEMDS"}
- do_facet $facet $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
-}
-
-get_mds_version_major () {
- local facet=${1:-"$SINGLEMDS"}
- local version=$(get_lustre_version $facet)
- echo $version | awk -F. '{print $1}'
+ do_facet $facet $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
}
-get_mds_version_minor () {
+lustre_version_code() {
local facet=${1:-"$SINGLEMDS"}
- local version=$(get_lustre_version $facet)
- echo $version | awk -F. '{print $2}'
+ version_code $(get_lustre_version $1)
}
# If the 2.0 MDS was mounted on 1.8 device, then the OSC and LOV names
# mdt osc: fsname-OSTXXXX-osc
mds_on_old_device() {
local mds=${1:-"$SINGLEMDS"}
- local major=$(get_mds_version_major $mds)
- local minor=$(get_mds_version_minor $mds)
- if [ $major -ge 2 ] || [ $major -eq 1 -a $minor -gt 8 ]; then
+ if [ $(lustre_version_code $mds) -gt $(version_code 1.9.0) ]; then
do_facet $mds "lctl list_param osc.$FSNAME-OST*-osc \
> /dev/null 2>&1" && return 0
fi
local mdt_label=$(convert_facet2label $mds_facet)
local mdt_index=$(echo $mdt_label | sed -e 's/^.*-//')
- local major=$(get_mds_version_major $mds_facet)
- local minor=$(get_mds_version_minor $mds_facet)
- if [ $major -le 1 -a $minor -le 8 ] || mds_on_old_device $mds_facet; then
+ if [ $(lustre_version_code $mds_facet) -le $(version_code 1.8.0) ] ||
+ mds_on_old_device $mds_facet; then
echo "${ost_label}-osc"
else
echo "${ost_label}-osc-${mdt_index}"
_wait_import_state () {
local expected=$1
local CONN_PROC=$2
- local maxtime=${3:-max_recovery_time}
+ local maxtime=${3:-$(max_recovery_time)}
local CONN_STATE
local i=0
CONN_STATE=$($LCTL get_param -n $CONN_PROC 2>/dev/null | cut -f2)
while [ "${CONN_STATE}" != "${expected}" ]; do
+ if [ "${expected}" == "DISCONN" ]; then
+ # for disconn we can check after proc entry is removed
+ [ "x${CONN_STATE}" == "x" ] && return 0
+ # with AT enabled, we can have connect request timeout near of
+ # reconnect timeout and test can't see real disconnect
+ [ "${CONN_STATE}" == "CONNECTING" ] && return 0
+ fi
[ $i -ge $maxtime ] && \
error "can't put import for $CONN_PROC into ${expected} state after $i sec, have ${CONN_STATE}" && \
return 1
wait_import_state() {
local state=$1
local params=$2
- local maxtime=${3:-max_recovery_time}
+ local maxtime=${3:-$(max_recovery_time)}
local param
for param in ${params//,/ }; do
_wait_import_state $state $param $maxtime || return
done
}
+
+# One client request could be timed out because server was not ready
+# when request was sent by client.
+# The request timeout calculation details :
+# ptl_send_rpc ()
+# /* We give the server rq_timeout secs to process the req, and
+# add the network latency for our local timeout. */
+# request->rq_deadline = request->rq_sent + request->rq_timeout +
+# ptlrpc_at_get_net_latency(request) ;
+#
+# ptlrpc_connect_import ()
+# request->rq_timeout = INITIAL_CONNECT_TIMEOUT
+#
+# init_imp_at () ->
+# -> at_init(&at->iat_net_latency, 0, 0) -> iat_net_latency=0
+# ptlrpc_at_get_net_latency(request) ->
+# at_get (max (iat_net_latency=0, at_min)) = at_min
+#
+# i.e.:
+# request->rq_timeout + ptlrpc_at_get_net_latency(request) =
+# INITIAL_CONNECT_TIMEOUT + at_min
+#
+# We will use obd_timeout instead of INITIAL_CONNECT_TIMEOUT
+# because we can not get this value in runtime,
+# the value depends on configure options, and it is not stored in /proc.
+# obd_support.h:
+# #define CONNECTION_SWITCH_MIN 5U
+# #define INITIAL_CONNECT_TIMEOUT max(CONNECTION_SWITCH_MIN,obd_timeout/20)
+
+request_timeout () {
+ local facet=$1
+
+ # request->rq_timeout = INITIAL_CONNECT_TIMEOUT
+ local init_connect_timeout=$TIMEOUT
+ [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
+
+ local at_min=$(at_get $facet at_min)
+
+ echo $(( init_connect_timeout + at_min ))
+}
+
wait_osc_import_state() {
local facet=$1
local ost_facet=$2
local expected=$3
local ost=$(get_osc_import_name $facet $ost_facet)
- local CONN_PROC
- local CONN_STATE
- local i=0
- CONN_PROC="osc.${ost}.ost_server_uuid"
- CONN_STATE=$(do_facet $facet lctl get_param -n $CONN_PROC 2>/dev/null | cut -f2)
- while [ "${CONN_STATE}" != "${expected}" ]; do
- if [ "${expected}" == "DISCONN" ]; then
- # for disconn we can check after proc entry is removed
- [ "x${CONN_STATE}" == "x" ] && return 0
- # with AT we can have connect request timeout ~ reconnect timeout
- # and test can't see real disconnect
- [ "${CONN_STATE}" == "CONNECTING" ] && return 0
- fi
- # disconnect rpc should be wait not more obd_timeout
- [ $i -ge $(($TIMEOUT * 3 / 2)) ] && \
- error "can't put import for ${ost}(${ost_facet}) into ${expected} state" && return 1
- sleep 1
- CONN_STATE=$(do_facet $facet lctl get_param -n $CONN_PROC 2>/dev/null | cut -f2)
- i=$(($i + 1))
- done
+ local param="osc.${ost}.ost_server_uuid"
+
+ # 1. wait the deadline of client 1st request (it could be skipped)
+ # 2. wait the deadline of client 2nd request
+ local maxtime=$(( 2 * $(request_timeout $facet)))
+
+ if ! do_rpc_nodes $(facet_host $facet) \
+ _wait_import_state $expected $param $maxtime; then
+ error "import is not in ${expected} state"
+ return 1
+ fi
- log "${ost_facet} now in ${CONN_STATE} state"
return 0
}
+
get_clientmdc_proc_path() {
echo "${1}-mdc-*"
}
shift
# Add paths to lustre tests for 32 and 64 bit systems.
- local RPATH="$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
- do_nodesv $list "PATH=$RPATH sh rpc.sh $@ "
+ local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
+ do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
}
wait_clients_import_state () {
}
oos_full() {
- local -a AVAILA
- local -a GRANTA
- local OSCFULL=1
- AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param obdfilter.*.kbytesavail))
- GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param -n obdfilter.*.tot_granted))
- for ((i=0; i<${#AVAILA[@]}; i++)); do
- local -a AVAIL1=(${AVAILA[$i]//=/ })
- GRANT=$((${GRANTA[$i]}/1024))
- echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} grnt=$GRANT diff=$((AVAIL1[1] - GRANT))
- [ $((AVAIL1[1] - GRANT)) -lt 400 ] && OSCFULL=0 && echo " FULL" || echo
- done
- return $OSCFULL
+ local -a AVAILA
+ local -a GRANTA
+ local -a TOTALA
+ local OSCFULL=1
+ AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param obdfilter.*.kbytesavail))
+ GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.tot_granted))
+ TOTALA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.kbytestotal))
+ for ((i=0; i<${#AVAILA[@]}; i++)); do
+ local -a AVAIL1=(${AVAILA[$i]//=/ })
+ local -a TOTAL=(${TOTALA[$i]//=/ })
+ GRANT=$((${GRANTA[$i]}/1024))
+ # allow 1% of total space in bavail because of delayed
+ # allocation with ZFS which might release some free space after
+ # txg commit. For small devices, we set a mininum of 8MB
+ local LIMIT=$((${TOTAL} / 100 + 8000))
+ echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} \
+ grnt=$GRANT diff=$((AVAIL1[1] - GRANT)) limit=${LIMIT}
+ [ $((AVAIL1[1] - GRANT)) -lt $LIMIT ] && OSCFULL=0 && \
+ echo " FULL" || echo
+ done
+ return $OSCFULL
}
pool_list () {
echo destroy the created pools: ${!listvar}
for poolname in ${!listvar//,/ }; do
- destroy_pool $fsname.$poolname
+ destroy_pool $fsname.$poolname
done
}
local ts=$(date +%s)
local docp=true
+
+ if [[ ! -f "$YAML_LOG" ]]; then
+ # init_logging is not performed before gather_logs,
+ # so the $LOGDIR needs to be checked here
+ check_shared_dir $LOGDIR && touch $LOGDIR/shared
+ fi
+
[ -f $LOGDIR/shared ] && docp=false
-
+
# dump lustre logs, dmesg
- prefix="$LOGDIR/${TESTSUITE}.${TESTNAME}"
+ prefix="$TESTLOG_PREFIX.$TESTNAME"
suffix="$ts.log"
echo "Dumping lctl log to ${prefix}.*.${suffix}"
if [ "$CLIENTONLY" -o "$PDSH" == "no_dsh" ]; then
echo "Dumping logs only on local client."
- $LCTL dk > ${prefix}.debug_log.$(hostname).${suffix}
- dmesg > ${prefix}.dmesg.$(hostname).${suffix}
+ $LCTL dk > ${prefix}.debug_log.$(hostname -s).${suffix}
+ dmesg > ${prefix}.dmesg.$(hostname -s).${suffix}
return
fi
do_nodesv $list \
- "$LCTL dk > ${prefix}.debug_log.\\\$(hostname).${suffix};
- dmesg > ${prefix}.dmesg.\\\$(hostname).${suffix}"
+ "$LCTL dk > ${prefix}.debug_log.\\\$(hostname -s).${suffix};
+ dmesg > ${prefix}.dmesg.\\\$(hostname -s).${suffix}"
if [ ! -f $LOGDIR/shared ]; then
do_nodes $list rsync -az "${prefix}.*.${suffix}" $HOSTNAME:$LOGDIR
- fi
-
- local archive=$LOGDIR/${TESTSUITE}-$ts.tar.bz2
- tar -jcf $archive $LOGDIR/*$ts* $LOGDIR/*${TESTSUITE}*
-
- echo $archive
-}
-
-cleanup_logs () {
- local list=${1:-$(comma_list $(nodes_list))}
-
- [ -n ${TESTSUITE} ] && do_nodes $list "rm -f $TMP/*${TESTSUITE}*" || true
+ fi
}
do_ls () {
max_recovery_time () {
local init_connect_timeout=$(( TIMEOUT / 20 ))
- [[ $init_connect_timeout > 5 ]] || init_connect_timeout=5
+ [[ $init_connect_timeout -ge 5 ]] || init_connect_timeout=5
local service_time=$(( $(at_max_get client) + $(( 2 * $(( 25 + 1 + init_connect_timeout)) )) ))
echo -n "checking $dir..."
res=$(do_check_flavor $dir $flavor)
echo "found $res/$expect $flavor connections"
- [ $res -eq $expect ] && return 0
+ [ $res -ge $expect ] && return 0
sleep 4
done
# Not found. Create local logdir
mkdir -p $dir
else
- touch $dir/node.$(hostname).yml
+ touch $dir/check_file.$(hostname -s)
fi
return 0
}
check_write_access() {
local dir=$1
+ local node
+ local file
+
for node in $(nodes_list); do
- if [ ! -f "$dir/node.${node}.yml" ]; then
+ file=$dir/check_file.$(short_hostname $node)
+ if [[ ! -f "$file" ]]; then
# Logdir not accessible/writable from this node.
return 1
fi
+ rm -f $file || return 1
done
return 0
}
if [[ -n $YAML_LOG ]]; then
return
fi
+ local SAVE_UMASK=`umask`
+ umask 0000
+
export YAML_LOG=${LOGDIR}/results.yml
mkdir -p $LOGDIR
init_clients_lists
- do_rpc_nodes $(comma_list $(nodes_list)) check_logdir $LOGDIR
- if check_write_access $LOGDIR; then
- touch $LOGDIR/shared
- echo "Logging to shared log directory: $LOGDIR"
- else
- echo "Logging to local directory: $LOGDIR"
+ if [ ! -f $YAML_LOG ]; then # If the yaml log already exists then we will just append to it
+ if check_shared_dir $LOGDIR; then
+ touch $LOGDIR/shared
+ echo "Logging to shared log directory: $LOGDIR"
+ else
+ echo "Logging to local directory: $LOGDIR"
+ fi
+
+ yml_nodes_file $LOGDIR >> $YAML_LOG
+ yml_results_file >> $YAML_LOG
fi
- yml_nodes_file $LOGDIR
- yml_results_file >> $YAML_LOG
+ umask $SAVE_UMASK
}
log_test() {
}
log_sub_test_begin() {
- yml_log_sub_test_begin $@ >> $YAML_LOG
+ yml_log_sub_test_begin "$@" >> $YAML_LOG
}
log_sub_test_end() {
- yml_log_sub_test_end $@ >> $YAML_LOG
+ yml_log_sub_test_end "$@" >> $YAML_LOG
}
run_llverdev()
{
local dev=$1
+ local llverdev_opts=$2
local devname=$(basename $1)
local size=$(grep "$devname"$ /proc/partitions | awk '{print $3}')
# loop devices aren't in /proc/partitions
local partial_arg=""
# Run in partial (fast) mode if the size
- # of a partition > 10 GB
- [ $size -gt 10 ] && partial_arg="-p"
+ # of a partition > 1 GB
+ [ $size -gt 1 ] && partial_arg="-p"
- llverdev --force $partial_arg $dev
+ llverdev --force $partial_arg $llverdev_opts $dev
}
-remove_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=${MOUNT%/*}/$facet
+run_llverfs()
+{
+ local dir=$1
+ local llverfs_opts=$2
+ local partial_arg=""
+ local size=$(df -B G $dir |tail -n 1 |awk '{print $2}' |sed 's/G//') #GB
- echo "removing files from $mdtdev on $facet: $files"
- mount -t $FSTYPE $MDS_MOUNT_OPTS $mdtdev $mntpt || return $?
- rc=0;
- for f in $files; do
- rm $mntpt/ROOT/$f || { rc=$?; break; }
- done
- umount -f $mntpt || return $?
- return $rc
+ # Run in partial (fast) mode if the size
+ # of a partition > 1 GB
+ [ $size -gt 1 ] && partial_arg="-p"
+
+ llverfs $partial_arg $llverfs_opts $dir
}
-duplicate_mdt_files() {
- local facet=$1
- local mdtdev=$2
- shift 2
- local files="$@"
- local mntpt=${MOUNT%/*}/$facet
+remove_mdt_files() {
+ local facet=$1
+ local mdtdev=$2
+ shift 2
+ local files="$@"
+ local mntpt=$(facet_mntpt $facet)
+ local opts=$MDS_MOUNT_OPTS
+
+ echo "removing files from $mdtdev on $facet: $files"
+ if [ $(facet_fstype $facet) == ldiskfs ] &&
+ ! do_facet $facet test -b ${!dev}; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+ mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
+ return $?
+ rc=0;
+ for f in $files; do
+ rm $mntpt/ROOT/$f || { rc=$?; break; }
+ done
+ umount -f $mntpt || return $?
+ return $rc
+}
- echo "duplicating files on $mdtdev on $facet: $files"
- mkdir -p $mntpt || return $?
- mount -t $FSTYPE $MDS_MOUNT_OPTS $mdtdev $mntpt || return $?
+duplicate_mdt_files() {
+ local facet=$1
+ local mdtdev=$2
+ shift 2
+ local files="$@"
+ local mntpt=$(facet_mntpt $facet)
+ local opts=$MDS_MOUNT_OPTS
+
+ echo "duplicating files on $mdtdev on $facet: $files"
+ mkdir -p $mntpt || return $?
+ if [ $(facet_fstype $facet) == ldiskfs ] &&
+ ! do_facet $facet test -b ${!dev}; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+ mount -t $(facet_fstype $facet) $opts $mdtdev $mntpt ||
+ return $?
do_umount() {
trap 0
cat ${rslt}.detail
}
+# returns the canonical name for an ldiskfs device
+ldiskfs_canon() {
+ local dev="$1"
+ local facet="$2"
+
+ do_facet $facet "dv=\\\$(lctl get_param -n $dev);
+if foo=\\\$(lvdisplay -c \\\$dv 2>/dev/null); then
+ echo dm-\\\${foo##*:};
+else
+ echo \\\$(basename \\\$dv);
+fi;"
+}
+
+is_sanity_benchmark() {
+ local benchmarks="dbench bonnie iozone fsx"
+ local suite=$1
+ for b in $benchmarks; do
+ if [ "$b" == "$suite" ]; then
+ return 0
+ fi
+ done
+ return 1
+}
+
+min_ost_size () {
+ $LCTL get_param -n osc.*.kbytesavail | sort -n | head -n1
+}
+
+# Get the block size of the filesystem.
+get_block_size() {
+ local facet=$1
+ local device=$2
+ local size
+
+ size=$(do_facet $facet "$DUMPE2FS -h $device 2>&1" |
+ awk '/^Block size:/ {print $3}')
+ echo $size
+}
+
+# Check whether the "large_xattr" feature is enabled or not.
+large_xattr_enabled() {
+ local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+
+ do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
+ return ${PIPESTATUS[0]}
+}
+
+# Get the maximum xattr size supported by the filesystem.
+max_xattr_size() {
+ local size
+
+ if large_xattr_enabled; then
+ # include/linux/limits.h: #define XATTR_SIZE_MAX 65536
+ size=65536
+ else
+ local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+ local block_size=$(get_block_size $SINGLEMDS $mds_dev)
+
+ # maximum xattr size = size of block - size of header -
+ # size of 1 entry - 4 null bytes
+ size=$((block_size - 32 - 32 - 4))
+ fi
+
+ echo $size
+}
+
+# Dump the value of the named xattr from a file.
+get_xattr_value() {
+ local xattr_name=$1
+ local file=$2
+
+ echo "$(getfattr -n $xattr_name --absolute-names --only-values $file)"
+}
+
+# Generate a string with size of $size bytes.
+generate_string() {
+ local size=${1:-1024} # in bytes
+
+ echo "$(head -c $size < /dev/zero | tr '\0' y)"
+}
+
+reformat_external_journal() {
+ if [ ! -z ${EJOURNAL} ]; then
+ local rcmd="do_facet ${SINGLEMDS}"
+
+ echo "reformat external journal on ${SINGLEMDS}:${EJOURNAL}"
+ ${rcmd} mke2fs -O journal_dev ${EJOURNAL} || return 1
+ fi
+}
+
+# MDT file-level backup/restore
+mds_backup_restore() {
+ local devname=$(mdsdevname ${SINGLEMDS//mds/})
+ local mntpt=$(facet_mntpt brpt)
+ local rcmd="do_facet ${SINGLEMDS}"
+ local metaea=${TMP}/backup_restore.ea
+ local metadata=${TMP}/backup_restore.tgz
+ local opts=${MDS_MOUNT_OPTS}
+
+ if ! ${rcmd} test -b ${devname}; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+
+ echo "file-level backup/restore on ${SINGLEMDS}:${devname}"
+
+ # step 1: build mount point
+ ${rcmd} mkdir -p $mntpt
+ # step 2: cleanup old backup
+ ${rcmd} rm -f $metaea $metadata
+ # step 3: mount dev
+ ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
+ # step 4: backup metaea
+ echo "backup EA"
+ ${rcmd} "cd $mntpt && getfattr -R -d -m '.*' -P . > $metaea && cd -" ||
+ return 2
+ # step 5: backup metadata
+ echo "backup data"
+ ${rcmd} tar zcf $metadata -C $mntpt/ . > /dev/null 2>&1 || return 3
+ # step 6: umount
+ ${rcmd} umount -d $mntpt || return 4
+ # step 7: reformat external journal if needed
+ reformat_external_journal || return 5
+ # step 8: reformat dev
+ echo "reformat new device"
+ add ${SINGLEMDS} $(mkfs_opts ${SINGLEMDS}) --backfstype ldiskfs \
+ --reformat $devname > /dev/null || return 6
+ # step 9: mount dev
+ ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 7
+ # step 10: restore metadata
+ echo "restore data"
+ ${rcmd} tar zxfp $metadata -C $mntpt > /dev/null 2>&1 || return 8
+ # step 11: restore metaea
+ echo "restore EA"
+ ${rcmd} "cd $mntpt && setfattr --restore=$metaea && cd - " || return 9
+ # step 12: remove recovery logs
+ echo "remove recovery logs"
+ ${rcmd} rm -fv $mntpt/OBJECTS/* $mntpt/CATALOGS
+ # step 13: umount dev
+ ${rcmd} umount -d $mntpt || return 10
+ # step 14: cleanup tmp backup
+ ${rcmd} rm -f $metaea $metadata
+}
+
+# remove OI files
+mds_remove_ois() {
+ local devname=$(mdsdevname ${SINGLEMDS//mds/})
+ local mntpt=$(facet_mntpt brpt)
+ local rcmd="do_facet ${SINGLEMDS}"
+ local idx=$1
+ local opts=${MDS_MOUNT_OPTS}
+
+ if ! ${rcmd} test -b ${devname}; then
+ opts=$(csa_add "$opts" -o loop)
+ fi
+
+ echo "remove OI files: idx=${idx}"
+
+ # step 1: build mount point
+ ${rcmd} mkdir -p $mntpt
+ # step 2: mount dev
+ ${rcmd} mount -t ldiskfs $opts $devname $mntpt || return 1
+ if [ -z $idx ]; then
+ # step 3: remove all OI files
+ ${rcmd} rm -fv $mntpt/oi.16*
+ elif [ $idx -lt 2 ]; then
+ ${rcmd} rm -fv $mntpt/oi.16.${idx}
+ else
+ local i
+
+ # others, rm oi.16.[idx, idx * idx, idx ** ...]
+ for ((i=${idx}; i<64; i=$((i * idx)))); do
+ ${rcmd} rm -fv $mntpt/oi.16.${i}
+ done
+ fi
+ # step 4: umount
+ ${rcmd} umount -d $mntpt || return 2
+ # OI files will be recreated when mounted as lustre next time.
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff