export GSS_PIPEFS=false
export IDENTITY_UPCALL=default
export QUOTA_AUTO=1
+export JOBSTATS_AUTO=${JOBSTATS_AUTO:-1}
+export JOBID_VAR=${JOBID_VAR:-"procname_uid"}
# LOAD_LLOOP: LU-409: only load llite_lloop module if kernel < 2.6.32 or
# LOAD_LLOOP is true. LOAD_LLOOP is false by default.
. $LUSTRE/tests/functions.sh
. $LUSTRE/tests/yaml.sh
+export LD_LIBRARY_PATH=${LUSTRE}/utils:${LD_LIBRARY_PATH}
+
LUSTRE_TESTS_CFG_DIR=${LUSTRE_TESTS_CFG_DIR:-${LUSTRE}/tests/cfg}
EXCEPT_LIST_FILE=${EXCEPT_LIST_FILE:-${LUSTRE_TESTS_CFG_DIR}/tests-to-skip.sh}
export TEST_FAILED=false
export FAIL_ON_SKIP_ENV=${FAIL_ON_SKIP_ENV:-false}
- export MKE2FS=${MKE2FS:-mke2fs}
- export DEBUGFS=${DEBUGFS:-debugfs}
- export TUNE2FS=${TUNE2FS:-tune2fs}
- export E2LABEL=${E2LABEL:-e2label}
- export DUMPE2FS=${DUMPE2FS:-dumpe2fs}
- export E2FSCK=${E2FSCK:-e2fsck}
- export LFSCK_BIN=${LFSCK_BIN:-lfsck}
+ export MKE2FS=$MKE2FS
+ if [ -z "$MKE2FS" ]; then
+ if which mkfs.ldiskfs >/dev/null 2>&1; then
+ export MKE2FS=mkfs.ldiskfs
+ else
+ export MKE2FS=mke2fs
+ fi
+ fi
+
+ export DEBUGFS=$DEBUGFS
+ if [ -z "$DEBUGFS" ]; then
+ if which debugfs.ldiskfs >/dev/null 2>&1; then
+ export DEBUGFS=debugfs.ldiskfs
+ else
+ export DEBUGFS=debugfs
+ fi
+ fi
+
+ export TUNE2FS=$TUNE2FS
+ if [ -z "$TUNE2FS" ]; then
+ if which tunefs.ldiskfs >/dev/null 2>&1; then
+ export TUNE2FS=tunefs.ldiskfs
+ else
+ export TUNE2FS=tune2fs
+ fi
+ fi
+
+ export E2LABEL=$E2LABEL
+ if [ -z "$E2LABEL" ]; then
+ if which label.ldiskfs >/dev/null 2>&1; then
+ export E2LABEL=label.ldiskfs
+ else
+ export E2LABEL=e2label
+ fi
+ fi
+
+ export DUMPE2FS=$DUMPE2FS
+ if [ -z "$DUMPE2FS" ]; then
+ if which dumpfs.ldiskfs >/dev/null 2>&1; then
+ export DUMPE2FS=dumpfs.ldiskfs
+ else
+ export DUMPE2FS=dumpe2fs
+ fi
+ fi
+ export E2FSCK=$E2FSCK
+ if [ -z "$E2FSCK" ]; then
+ if which fsck.ldiskfs >/dev/null 2>&1; then
+ export E2FSCK=fsck.ldiskfs
+ else
+ export E2FSCK=e2fsck
+ fi
+ fi
+
+ export LFSCK_BIN=${LFSCK_BIN:-lfsck}
export LFSCK_ALWAYS=${LFSCK_ALWAYS:-"no"} # check fs after each test suite
export FSCK_MAX_ERR=4 # File system errors left uncorrected
fi
fi
export LL_DECODE_FILTER_FID=${LL_DECODE_FILTER_FID:-"$LUSTRE/utils/ll_decode_filter_fid"}
- [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID=$(which ll_decode_filter_fid)
+ [ ! -f "$LL_DECODE_FILTER_FID" ] && export LL_DECODE_FILTER_FID="ll_decode_filter_fid"
export MKFS=${MKFS:-"$LUSTRE/utils/mkfs.lustre"}
- [ ! -f "$MKFS" ] && export MKFS=$(which mkfs.lustre)
+ [ ! -f "$MKFS" ] && export MKFS="mkfs.lustre"
export TUNEFS=${TUNEFS:-"$LUSTRE/utils/tunefs.lustre"}
- [ ! -f "$TUNEFS" ] && export TUNEFS=$(which tunefs.lustre)
+ [ ! -f "$TUNEFS" ] && export TUNEFS="tunefs.lustre"
export CHECKSTAT="${CHECKSTAT:-"checkstat -v"} "
export LUSTRE_RMMOD=${LUSTRE_RMMOD:-$LUSTRE/scripts/lustre_rmmod}
[ ! -f "$LUSTRE_RMMOD" ] &&
IDENTITY_UPCALL=false
;;
esac
+
export LOAD_MODULES_REMOTE=${LOAD_MODULES_REMOTE:-false}
# Paths on remote nodes, if different
export RLUSTRE=${RLUSTRE:-$LUSTRE}
export RPWD=${RPWD:-$PWD}
export I_MOUNTED=${I_MOUNTED:-"no"}
- if [ ! -f /lib/modules/$(uname -r)/kernel/fs/lustre/mds.ko -a \
- ! -f /lib/modules/$(uname -r)/updates/kernel/fs/lustre/mds.ko -a \
- ! -f `dirname $0`/../mds/mds.ko ]; then
+ if [ ! -f /lib/modules/$(uname -r)/kernel/fs/lustre/mdt.ko -a \
+ ! -f /lib/modules/$(uname -r)/updates/kernel/fs/lustre/mdt.ko -a \
+ ! -f `dirname $0`/../mdt/mdt.ko ]; then
export CLIENTMODSONLY=yes
fi
rm -f $TMP/*active
}
+check_cpt_number() {
+ local facet=$1
+ local ncpts
+
+ ncpts=$(do_facet $facet "lctl get_param -n " \
+ "cpu_partition_table 2>/dev/null| wc -l" || echo 1)
+
+ if [ $ncpts -eq 0 ]; then
+ echo "1"
+ else
+ echo $ncpts
+ fi
+}
+
version_code() {
# split arguments like "1.8.6-wc3" into "1", "8", "6", "wc3"
eval set -- $(tr "[:punct:]" " " <<< $*)
- echo -n $((($1 << 16) | ($2 << 8) | $3))
+ echo -n "$((($1 << 16) | ($2 << 8) | $3))"
}
export LINUX_VERSION=$(uname -r | sed -e "s/[-.]/ /3" -e "s/ .*//")
optvar="MODOPTS_$(basename $module | tr a-z A-Z)"
eval set -- \$$optvar
if [ $# -eq 0 -a -n "$MODPROBECONF" ]; then
- # Nothing in $MODOPTS_<MODULE>; try modprobe.conf
- set -- $(grep -P "^options\\s+${BASE}" $MODPROBECONF)
- # Get rid of "options $module"
- (($# > 0)) && shift 2
-
- # Ensure we have accept=all for lnet
- if [ $(basename $module) = lnet ]; then
- # OK, this is a bit wordy...
- local arg accept_all_present=false
- for arg in "$@"; do
- [ "$arg" = accept=all ] && accept_all_present=true
- done
- $accept_all_present || set -- "$@" accept=all
- fi
+ # Nothing in $MODOPTS_<MODULE>; try modprobe.conf
+ local opt
+ opt=$(awk -v var="^options $BASE" '$0 ~ var \
+ {gsub("'"options $BASE"'",""); print}' $MODPROBECONF)
+ set -- $(echo -n $opt)
+
+ # Ensure we have accept=all for lnet
+ if [ $(basename $module) = lnet ]; then
+ # OK, this is a bit wordy...
+ local arg accept_all_present=false
+
+ for arg in "$@"; do
+ [ "$arg" = accept=all ] && \
+ accept_all_present=true
+ done
+ $accept_all_present || set -- "$@" accept=all
+ fi
+ export $optvar="$*"
fi
fi
}
load_modules_local() {
- if [ "$USE_OFD" == yes ]; then
- if module_loaded obdfilter; then
- if ! $LUSTRE_RMMOD ldiskfs; then
- echo "$HOSTNAME may still be using obdfilter.ko"
- return 1
- fi
- fi
- else
- if module_loaded ofd; then
- if ! $LUSTRE_RMMOD ldiskfs; then
- echo "$HOSTNAME may still be using ofd.ko"
- return 1
- fi
- fi
- fi
-
if [ -n "$MODPROBE" ]; then
# use modprobe
echo "Using modprobe to load modules"
return 0
fi
- echo Loading modules from $LUSTRE
- load_module ../libcfs/libcfs/libcfs
+ echo Loading modules from $LUSTRE
+
+ local ncpus
+
+ if [ -f /sys/devices/system/cpu/online ]; then
+ ncpus=$(($(cut -d "-" -f 2 /sys/devices/system/cpu/online) + 1))
+ echo "detected $ncpus online CPUs by sysfs"
+ else
+ ncpus=$(getconf _NPROCESSORS_CONF 2>/dev/null)
+ local rc=$?
+ if [ $rc -eq 0 ]; then
+ echo "detected $ncpus online CPUs by getconf"
+ else
+ echo "Can't detect number of CPUs"
+ ncpus=1
+ fi
+ fi
+
+ # if there is only one CPU core, libcfs can only create one partition
+ # if there is more than 4 CPU cores, libcfs should create multiple CPU
+ # partitions. So we just force libcfs to create 2 partitions for
+ # system with 2 or 4 cores
+ if [ $ncpus -le 4 ] && [ $ncpus -gt 1 ]; then
+ # force to enable multiple CPU partitions
+ echo "Force libcfs to create 2 CPU partitions"
+ MODOPTS_LIBCFS="cpu_npartitions=2 $MODOPTS_LIBCFS"
+ else
+ echo "libcfs will create CPU partition based on online CPUs"
+ fi
+
+ load_module ../libcfs/libcfs/libcfs
+
[ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
[ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
load_module ../lnet/lnet/lnet
grep -q crc16 $SYMLIST || { modprobe crc16 2>/dev/null || true; }
grep -q -w jbd $SYMLIST || { modprobe jbd 2>/dev/null || true; }
grep -q -w jbd2 $SYMLIST || { modprobe jbd2 2>/dev/null || true; }
+ [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
+ if [[ $(node_fstypes $HOSTNAME) == *zfs* ]]; then
+ modprobe zfs
+ load_module osd-zfs/osd_zfs
+ fi
+ load_module mgs/mgs
+ load_module mdd/mdd
if [[ $(node_fstypes $HOSTNAME) == *ldiskfs* ]]; then
+ #
+ # This block shall be moved up beside osd-zfs as soon
+ # as osd-ldiskfs stops using mdd symbols.
+ #
grep -q exportfs_decode_fh $SYMLIST ||
- { modprobe exportfs 2> /dev/null || true; }
+ { modprobe exportfs 2> /dev/null || true; }
load_module ../ldiskfs/ldiskfs/ldiskfs
+ load_module lvfs/fsfilt_ldiskfs
+ load_module osd-ldiskfs/osd_ldiskfs
fi
- [ "$LQUOTA" != "no" ] && load_module quota/lquota $LQUOTAOPTS
- load_module mgs/mgs
- load_module mds/mds
- load_module mdd/mdd
load_module mdt/mdt
- load_module lvfs/fsfilt_ldiskfs
- load_module cmm/cmm
- load_module osd-ldiskfs/osd_ldiskfs
load_module ost/ost
- if [ "$USE_OFD" == yes ]; then
- load_module ofd/ofd
- else
- load_module obdfilter/obdfilter
- fi
+ load_module lod/lod
+ load_module osp/osp
+ load_module ofd/ofd
+ load_module osp/osp
fi
# bug 19124
# load modules on remote nodes optionally
# lustre-tests have to be installed on these nodes
- if $LOAD_MODULES_REMOTE ; then
+ if $LOAD_MODULES_REMOTE; then
local list=$(comma_list $(remote_nodes_list))
- echo loading modules on $list
- do_rpc_nodes $list load_modules_local
+ if [ -n "$list" ]; then
+ echo "loading modules on: '$list'"
+ do_rpc_nodes "$list" load_modules_local
+ fi
fi
}
$LUSTRE_RMMOD ldiskfs || return 2
- if $LOAD_MODULES_REMOTE ; then
+ if $LOAD_MODULES_REMOTE; then
local list=$(comma_list $(remote_nodes_list))
- if [ ! -z $list ]; then
- echo unloading modules on $list
- do_rpc_nodes $list $LUSTRE_RMMOD ldiskfs
- do_rpc_nodes $list check_mem_leak
+ if [ -n "$list" ]; then
+ echo "unloading modules on: '$list'"
+ do_rpc_nodes "$list" $LUSTRE_RMMOD ldiskfs
+ do_rpc_nodes "$list" check_mem_leak
fi
fi
facet_type() {
local facet=$1
- echo -n $facet | sed -e 's/^fs[0-9]\+//' -e 's/[0-9]\+//' |
+ echo -n $facet | sed -e 's/^fs[0-9]\+//' -e 's/[0-9_]\+//' |
tr '[:lower:]' '[:upper:]'
}
echo -n $label
}
+#
+# This and set_obdfilter_param() shall be used to access OSD parameters
+# once existed under "obdfilter":
+#
+# mntdev
+# stats
+# read_cache_enable
+# writethrough_cache_enable
+#
+get_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+
+ do_nodes $nodes "$LCTL get_param -n obdfilter.$device.$name \
+ osd-*.$device.$name 2>&1" | grep -v 'Found no match'
+}
+
+set_obdfilter_param() {
+ local nodes=$1
+ local device=${2:-$FSNAME-OST*}
+ local name=$3
+ local value=$4
+
+ do_nodes $nodes "$LCTL set_param -n obdfilter.$device.$name=$value \
+ osd-*.$device.$name=$value 2>&1" | grep -v 'Found no match'
+}
+
set_debug_size () {
local dz=${1:-$DEBUG_SIZE}
}
set_default_debug_nodes () {
- local nodes=$1
+ local nodes="$1"
- if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
- nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
- set_default_debug
- fi
+ if [[ ,$nodes, = *,$HOSTNAME,* ]]; then
+ nodes=$(exclude_items_from_list "$nodes" "$HOSTNAME")
+ set_default_debug
+ fi
- [[ -n $nodes ]] && do_rpc_nodes $nodes set_default_debug \
- \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
+ do_rpc_nodes "$nodes" set_default_debug \
+ \\\"$PTLDEBUG\\\" \\\"$SUBSYSTEM\\\" $DEBUG_SIZE || true
}
set_default_debug_facet () {
return $RC
}
+#
+# When a ZFS OSD is made read-only by replay_barrier(), its pool is "freezed".
+# Because stopping corresponding target may not clear this in-memory state, we
+# need to zap the pool from memory by exporting and reimporting the pool.
+#
+# Although the uberblocks are not updated when a pool is freezed, transactions
+# are still written to the disks. Modified blocks may be cached in memory when
+# tests try reading them back. The export-and-reimport process also evicts any
+# cached pool data from memory to provide the correct "data loss" semantics.
+#
+refresh_disk() {
+ local facet=$1
+ local fstype=$(facet_fstype $facet)
+ local _dev
+ local dev
+ local poolname
+
+ if [ "${fstype}" == "zfs" ]; then
+ _dev=$(facet_active $facet)_dev
+ dev=${!_dev} # expand _dev to its value, e.g. ${mds1_dev}
+ poolname="${dev%%/*}" # poolname is string before "/"
+
+ if [ "${poolname}" == "" ]; then
+ echo "invalid dataset name: $dev"
+ return
+ fi
+ do_facet $facet "cp /etc/zfs/zpool.cache /tmp/zpool.cache.back"
+ do_facet $facet "$ZPOOL export ${poolname}"
+ do_facet $facet "$ZPOOL import -f -c /tmp/zpool.cache.back \
+ ${poolname}"
+ fi
+}
+
stop() {
local running
local facet=$1
# save quota version (both administrative and operational quotas)
# add an additional parameter if mountpoint is ever different from $MOUNT
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
quota_save_version() {
local fsname=${2:-$FSNAME}
local spec=$1
done
}
-# client could mount several lustre
-quota_type () {
- local fsname=${1:-$FSNAME}
- local rc=0
- do_facet mgs lctl get_param mdd.${fsname}-MDT*.quota_type || rc=$?
- do_nodes $(comma_list $(osts_nodes)) \
- lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
- return $rc
-}
-
-restore_quota_type () {
- local mntpt=${1:-$MOUNT}
- local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
- if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
- return
- fi
- quota_save_version $old_QUOTA_TYPE
+# client could mount several lustre
+#
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+quota_type() {
+ local fsname=${1:-$FSNAME}
+ local rc=0
+ do_facet $SINGLEMDS lctl get_param mdd.${fsname}-MDT*.quota_type ||
+ rc=$?
+ do_nodes $(comma_list $(osts_nodes)) \
+ lctl get_param obdfilter.${fsname}-OST*.quota_type || rc=$?
+ return $rc
+}
+
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+restore_quota_old() {
+ local mntpt=${1:-$MOUNT}
+ local quota_type=$(quota_type $FSNAME | grep MDT | cut -d "=" -f2)
+ if [ ! "$old_QUOTA_TYPE" ] ||
+ [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
+ return
+ fi
+ quota_save_version $old_QUOTA_TYPE
}
-setup_quota(){
- local mntpt=$1
+# XXX This function is kept for interoperability with old server (< 2.3.50),
+# it should be removed whenever we drop the interoperability for such
+# server.
+setup_quota_old(){
+ local mntpt=$1
- if [ "$USE_OFD" = "yes" ]; then
- $LFS quotacheck $mntpt || error "quotacheck failed"
- return
- fi
+ # no quota enforcement for now and accounting works out of the box
+ return
# We need save the original quota_type params, and restore them after testing
local quota_usrs=$QUOTA_USERS
# get_filesystem_size
- local disksz=$(lfs df $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local disksz=$(lfs_df $mntpt | grep "summary" | awk '{print $2}')
local blk_soft=$((disksz + 1024))
local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
- local Inodes=$(lfs df -i $mntpt | grep "filesystem summary:" | awk '{print $3}')
+ local Inodes=$(lfs_df -i $mntpt | grep "summary" | awk '{print $2}')
local i_soft=$Inodes
local i_hard=$((i_soft + i_soft / 20))
done
}
+# get mdt quota type
+mdt_quota_type() {
+ local varsvc=${SINGLEMDS}_svc
+ do_facet $SINGLEMDS $LCTL get_param -n \
+ osd-$(facet_fstype $SINGLEMDS).${!varsvc}.quota_slave.enabled
+}
+
+# get ost quota type
+ost_quota_type() {
+ # All OSTs should have same quota type
+ local varsvc=ost1_svc
+ do_facet ost1 $LCTL get_param -n \
+ osd-$(facet_fstype ost1).${!varsvc}.quota_slave.enabled
+}
+
+# restore old quota type settings
+restore_quota() {
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ restore_quota_old
+ return
+ fi
+
+ if [ "$old_MDT_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.mdt=$old_MDT_QUOTA_TYPE
+ fi
+ if [ "$old_OST_QUOTA_TYPE" ]; then
+ do_facet mgs $LCTL conf_param \
+ $FSNAME.quota.ost=$old_OST_QUOTA_TYPE
+ fi
+}
+
+# Handle the case when there is a space in the lfs df
+# "filesystem summary" line the same as when there is no space.
+# This will allow fixing the "lfs df" summary line in the future.
+lfs_df() {
+ $LFS df $* | sed -e 's/filesystem /filesystem_/'
+}
+
+setup_quota(){
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.50) ]; then
+ setup_quota_old $1
+ return
+ fi
+
+ local mntpt=$1
+
+ # save old quota type & set new quota type
+ local mdt_qtype=$(mdt_quota_type)
+ local ost_qtype=$(ost_quota_type)
+
+ echo "[HOST:$HOSTNAME] [old_mdt_qtype:$mdt_qtype]" \
+ "[old_ost_qtype:$ost_qtype] [new_qtype:$QUOTA_TYPE]"
+
+ export old_MDT_QUOTA_TYPE=$mdt_qtype
+ export old_OST_QUOTA_TYPE=$ost_qtype
+
+ do_facet mgs $LCTL conf_param $FSNAME.quota.mdt=$QUOTA_TYPE ||
+ error "set mdt quota type failed"
+ do_facet mgs $LCTL conf_param $FSNAME.quota.ost=$QUOTA_TYPE ||
+ error "set ost quota type failed"
+
+ local quota_usrs=$QUOTA_USERS
+
+ # get_filesystem_size
+ local disksz=$(lfs_df $mntpt | grep "summary" | awk '{print $2}')
+ local blk_soft=$((disksz + 1024))
+ local blk_hard=$((blk_soft + blk_soft / 20)) # Go 5% over
+
+ local inodes=$(lfs_df -i $mntpt | grep "summary" | awk '{print $2}')
+ local i_soft=$inodes
+ local i_hard=$((i_soft + i_soft / 20))
+
+ echo "Total disk size: $disksz block-softlimit: $blk_soft" \
+ "block-hardlimit: $blk_hard inode-softlimit: $i_soft" \
+ "inode-hardlimit: $i_hard"
+
+ local cmd
+ for usr in $quota_usrs; do
+ echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
+ for type in u g; do
+ cmd="$LFS setquota -$type $usr -b $blk_soft"
+ cmd="$cmd -B $blk_hard -i $i_soft -I $i_hard $mntpt"
+ echo "+ $cmd"
+ eval $cmd || error "$cmd FAILED!"
+ done
+ # display the quota status
+ echo "Quota settings for $usr : "
+ $LFS quota -v -u $usr $mntpt || true
+ done
+}
+
zconf_mount() {
local client=$1
local mnt=$2
echo $(comma_list $affected)
}
-facet_up () {
- local facet=$1
- local host=${2:-$(facet_host $facet)}
+facet_up() {
+ local facet=$1
+ local host=${2:-$(facet_host $facet)}
- local label=$(convert_facet2label $facet)
- do_node $host lctl dl | awk '{print $4}' | grep -q $label
+ local label=$(convert_facet2label $facet)
+ do_node $host $LCTL dl | awk '{print $4}' | grep -q -x $label
}
facets_up_on_host () {
}
reboot_facet() {
- local facet=$1
- if [ "$FAILURE_MODE" = HARD ]; then
- reboot_node $(facet_active_host $facet)
- else
- sleep 10
- fi
+ local facet=$1
+ if [ "$FAILURE_MODE" = HARD ]; then
+ reboot_node $(facet_active_host $facet)
+ else
+ refresh_disk ${facet}
+ sleep 10
+ fi
}
boot_node() {
}
check_progs_installed () {
- local nodes=$1
- shift
+ local nodes=$1
+ shift
- do_rpc_nodes $nodes _check_progs_installed $@
+ do_rpc_nodes "$nodes" _check_progs_installed $@
}
# recovery-scale functions
check_mem_leak || exit 204
- [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl && \
- echo "$0: lustre didn't clean up..." 1>&2 && return 202 || true
+ [ "`lctl dl 2> /dev/null | wc -l`" -gt 0 ] && lctl dl &&
+ echo "$TESTSUITE: lustre didn't clean up..." 1>&2 &&
+ return 202 || true
- if module_loaded lnet || module_loaded libcfs; then
- echo "$0: modules still loaded..." 1>&2
- /sbin/lsmod 1>&2
- return 203
- fi
- return 0
+ if module_loaded lnet || module_loaded libcfs; then
+ echo "$TESTSUITE: modules still loaded..." 1>&2
+ /sbin/lsmod 1>&2
+ return 203
+ fi
+ return 0
}
wait_update () {
return 3
}
-wait_update_facet () {
- local facet=$1
- wait_update $(facet_active_host $facet) "$@"
+wait_update_facet() {
+ local facet=$1
+ shift
+ wait_update $(facet_active_host $facet) "$@"
}
-wait_delete_completed () {
- local TOTALPREV=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
+sync_all_data() {
+ do_node $(osts_nodes) "lctl set_param -n osd*.*OS*.force_sync 1" 2>&1 |
+ grep -v 'Found no match'
+}
- local WAIT=0
- local MAX_WAIT=20
- while [ "$WAIT" -ne "$MAX_WAIT" ]; do
- sleep 1
- TOTAL=`lctl get_param -n osc.*.kbytesavail | \
- awk 'BEGIN{total=0}; {total+=$1}; END{print total}'`
- [ "$TOTAL" -eq "$TOTALPREV" ] && return 0
- echo "Waiting delete completed ... prev: $TOTALPREV current: $TOTAL "
- TOTALPREV=$TOTAL
- WAIT=$(( WAIT + 1))
- done
- echo "Delete is not completed in $MAX_WAIT sec"
- return 1
+wait_delete_completed_mds() {
+ local MAX_WAIT=${1:-20}
+ local mds2sync=""
+ local stime=`date +%s`
+ local etime
+ local node
+ local changes
+
+ # find MDS with pending deletions
+ for node in $(mdts_nodes); do
+ changes=$(do_node $node "lctl get_param -n osc.*MDT*.sync_*" \
+ 2>/dev/null | calc_sum)
+ if [ -z "$changes" ] || [ $changes -eq 0 ]; then
+ continue
+ fi
+ mds2sync="$mds2sync $node"
+ done
+ if [ "$mds2sync" == "" ]; then
+ return
+ fi
+ mds2sync=$(comma_list $mds2sync)
+
+ # sync MDS transactions
+ do_nodes $mds2sync "lctl set_param -n osd*.*MD*.force_sync 1"
+
+ # wait till all changes are sent and commmitted by OSTs
+ # for ldiskfs space is released upon execution, but DMU
+ # do this upon commit
+
+ local WAIT=0
+ while [ "$WAIT" -ne "$MAX_WAIT" ]; do
+ changes=$(do_nodes $mds2sync "lctl get_param -n osc.*MDT*.sync_*" \
+ | calc_sum)
+ #echo "$node: $changes changes on all"
+ if [ "$changes" -eq "0" ]; then
+ etime=`date +%s`
+ #echo "delete took $((etime - stime)) seconds"
+ return
+ fi
+ sleep 1
+ WAIT=$(( WAIT + 1))
+ done
+
+ etime=`date +%s`
+ echo "Delete is not completed in $((etime - stime)) seconds"
+ do_nodes $mds2sync "lctl get_param osc.*MDT*.sync_*"
}
wait_for_host() {
fi
echo affected facets: $facets
- # we can use "for" here because we are waiting the slowest
- for facet in ${facets//,/ }; do
- local var_svc=${facet}_svc
- local param="*.${!var_svc}.recovery_status"
+ # we can use "for" here because we are waiting the slowest
+ for facet in ${facets//,/ }; do
+ local var_svc=${facet}_svc
+ local param="*.${!var_svc}.recovery_status"
- local host=$(facet_active_host $facet)
- do_rpc_nodes $host _wait_recovery_complete $param $MAX
- done
+ local host=$(facet_active_host $facet)
+ do_rpc_nodes "$host" _wait_recovery_complete $param $MAX
+ done
}
wait_mds_ost_sync () {
}
wait_destroy_complete () {
- echo "Waiting for destroy to be done..."
- # MAX value shouldn't be big as this mean server responsiveness
- # never increase this just to make test pass but investigate
- # why it takes so long time
- local MAX=5
- local WAIT=0
- while [ $WAIT -lt $MAX ]; do
- local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
- local con=1
- for ((i=0; i<${#RPCs[@]}; i++)); do
- [ ${RPCs[$i]} -eq 0 ] && continue
- # there are still some destroy RPCs in flight
- con=0
- break;
- done
- sleep 1
- [ ${con} -eq 1 ] && return 0 # done waiting
- echo "Waiting $WAIT secs for destroys to be done."
- WAIT=$((WAIT + 1))
- done
- echo "Destroys weren't done in $MAX sec."
- return 1
+ echo "Waiting for local destroys to complete"
+ # MAX value shouldn't be big as this mean server responsiveness
+ # never increase this just to make test pass but investigate
+ # why it takes so long time
+ local MAX=5
+ local WAIT=0
+ while [ $WAIT -lt $MAX ]; do
+ local -a RPCs=($($LCTL get_param -n osc.*.destroys_in_flight))
+ local con=1
+ local i
+
+ for ((i=0; i<${#RPCs[@]}; i++)); do
+ [ ${RPCs[$i]} -eq 0 ] && continue
+ # there are still some destroy RPCs in flight
+ con=0
+ break;
+ done
+ sleep 1
+ [ ${con} -eq 1 ] && return 0 # done waiting
+ echo "Waiting ${WAIT}s for local destroys to complete"
+ WAIT=$((WAIT + 1))
+ done
+ echo "Local destroys weren't done in $MAX sec."
+ return 1
+}
+
+wait_delete_completed() {
+ wait_delete_completed_mds $1 || return $?
+ wait_destroy_complete
}
wait_exit_ST () {
}
facet_failover() {
- local facet=$1
- local sleep_time=$2
- local host=$(facet_active_host $facet)
-
- echo "Failing $facet on node $host"
-
- # Make sure the client data is synced to disk. LU-924
- #
- # We don't write client data synchrnously (to avoid flooding sync writes
- # when there are many clients connecting), so if the server reboots before
- # the client data reachs disk, the client data will be lost and the client
- # will be evicted after recovery, which is not what we expected.
- do_facet $facet "sync; sync; sync"
-
- local affected=$(affected_facets $facet)
+ local facets=$1
+ local sleep_time=$2
+ local -a affecteds
+ local facet
+ local total=0
+ local index=0
+ local skip
+
+ #Because it will only get up facets, we need get affected
+ #facets before shutdown
+ #For HARD Failure mode, it needs make sure facets on the same
+ #HOST will only be shutdown and reboot once
+ for facet in ${facets//,/ }; do
+ local affected_facet
+ skip=0
+ #check whether facet has been included in other affected facets
+ for ((index=0; index<$total; index++)); do
+ [[ *,$facet,* == ,${affecteds[index]}, ]] && skip=1
+ done
- shutdown_facet $facet
+ if [ $skip -eq 0 ]; then
+ affecteds[$total]=$(affected_facets $facet)
+ total=$((total+1))
+ fi
+ done
- echo affected facets: $affected
+ for ((index=0; index<$total; index++)); do
+ facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
+ local host=$(facet_active_host $facet)
+ echo "Failing ${affecteds[index]} on $host"
+ shutdown_facet $facet
+ done
- [ -n "$sleep_time" ] && sleep $sleep_time
+ for ((index=0; index<$total; index++)); do
+ facet=$(echo ${affecteds[index]} | tr -s " " | cut -d"," -f 1)
+ echo reboot facets: ${affecteds[index]}
- reboot_facet $facet
+ reboot_facet $facet
- change_active $affected
+ change_active ${affecteds[index]}
- wait_for_facet $affected
- # start mgs first if it is affected
- if ! combined_mgs_mds && list_member $affected mgs; then
- mount_facet mgs || error "Restart of mgs failed"
- fi
- # FIXME; has to be changed to mount all facets concurrently
- affected=$(exclude_items_from_list $affected mgs)
- mount_facets $affected
+ wait_for_facet ${affecteds[index]}
+ # start mgs first if it is affected
+ if ! combined_mgs_mds &&
+ list_member ${affecteds[index]} mgs; then
+ mount_facet mgs || error "Restart of mgs failed"
+ fi
+ # FIXME; has to be changed to mount all facets concurrently
+ affected=$(exclude_items_from_list ${affecteds[index]} mgs)
+ echo mount facets: ${affecteds[index]}
+ mount_facets ${affecteds[index]}
+ done
}
obd_name() {
}
replay_barrier() {
- local facet=$1
- do_facet $facet "sync; sync; sync"
- df $MOUNT
+ local facet=$1
+ do_facet $facet "sync; sync; sync"
+ df $MOUNT
- # make sure there will be no seq change
- local clients=${CLIENTS:-$HOSTNAME}
- do_nodes $clients "f=${MOUNT}/fsa-\\\$(hostname); mcreate \\\$f; rm \\\$f"
+ # make sure there will be no seq change
+ local clients=${CLIENTS:-$HOSTNAME}
+ local f=fsa-\\\$\(hostname\)
+ do_nodes $clients "mcreate $MOUNT/$f; rm $MOUNT/$f"
+ do_nodes $clients "if [ -d $MOUNT2 ]; then mcreate $MOUNT2/$f; rm $MOUNT2/$f; fi"
- local svc=${facet}_svc
- do_facet $facet $LCTL --device %${!svc} notransno
- do_facet $facet $LCTL --device %${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ local svc=${facet}_svc
+ do_facet $facet $LCTL --device ${!svc} notransno
+ do_facet $facet $LCTL --device ${!svc} readonly
+ do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "local REPLAY BARRIER on ${!svc}"
}
replay_barrier_nodf() {
- local facet=$1 echo running=${running}
- do_facet $facet "sync; sync; sync"
- local svc=${facet}_svc
- echo Replay barrier on ${!svc}
- do_facet $facet $LCTL --device %${!svc} notransno
- do_facet $facet $LCTL --device %${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ local facet=$1 echo running=${running}
+ do_facet $facet "sync; sync; sync"
+ local svc=${facet}_svc
+ echo Replay barrier on ${!svc}
+ do_facet $facet $LCTL --device ${!svc} notransno
+ do_facet $facet $LCTL --device ${!svc} readonly
+ do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "local REPLAY BARRIER on ${!svc}"
}
replay_barrier_nosync() {
- local facet=$1 echo running=${running}
- local svc=${facet}_svc
- echo Replay barrier on ${!svc}
- do_facet $facet $LCTL --device %${!svc} notransno
- do_facet $facet $LCTL --device %${!svc} readonly
- do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
- $LCTL mark "local REPLAY BARRIER on ${!svc}"
+ local facet=$1 echo running=${running}
+ local svc=${facet}_svc
+ echo Replay barrier on ${!svc}
+ do_facet $facet $LCTL --device ${!svc} notransno
+ do_facet $facet $LCTL --device ${!svc} readonly
+ do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
+ $LCTL mark "local REPLAY BARRIER on ${!svc}"
}
mds_evict_client() {
}
fail_abort() {
- local facet=$1
- stop $facet
- change_active $facet
- wait_for_facet $facet
- mount_facet $facet -o abort_recovery
- clients_up || echo "first df failed: $?"
- clients_up || error "post-failover df: $?"
+ local facet=$1
+ stop $facet
+ refresh_disk ${facet}
+ change_active $facet
+ wait_for_facet $facet
+ mount_facet $facet -o abort_recovery
+ clients_up || echo "first df failed: $?"
+ clients_up || error "post-failover df: $?"
}
do_lmc() {
}
facet_host() {
- local facet=$1
-
- [ "$facet" == client ] && echo -n $HOSTNAME && return
- varname=${facet}_HOST
- if [ -z "${!varname}" ]; then
- if [ "${facet:0:3}" == "ost" ]; then
- eval ${facet}_HOST=${ost_HOST}
- fi
- fi
- echo -n ${!varname}
+ local facet=$1
+ local varname
+
+ [ "$facet" == client ] && echo -n $HOSTNAME && return
+ varname=${facet}_HOST
+ if [ -z "${!varname}" ]; then
+ if [ "${facet:0:3}" == "ost" ]; then
+ eval export ${facet}_HOST=${ost_HOST}
+ elif [ "${facet:0:3}" == "mdt" -o \
+ "${facet:0:3}" == "mds" -o \
+ "${facet:0:3}" == "mgs" ]; then
+ eval export ${facet}_HOST=${mds_HOST}
+ fi
+ fi
+ echo -n ${!varname}
}
facet_failover_host() {
local facet=$1
- local var
+ local varname
var=${facet}failover_HOST
if [ -n "${!var}" ]; then
return
fi
+ if [ "${facet:0:3}" == "mdt" -o "${facet:0:3}" == "mds" -o \
+ "${facet:0:3}" == "mgs" ]; then
+
+ eval export ${facet}failover_host=${mds_HOST}
+ echo ${mds_HOST}
+ return
+ fi
+
if [[ $facet == ost* ]]; then
- var=ostfailover_HOST
- if [ -n "${!var}" ]; then
- echo ${!var}
- return
- fi
+ eval export ${facet}failover_host=${ost_HOST}
+ echo ${ost_HOST}
+ return
fi
}
get_env_vars() {
local var
local value
+ local facets=$(get_facets)
+ local facet
for var in ${!MODOPTS_*}; do
value=${!var}
echo -n " ${var}=\"$value\""
done
- echo -n " USE_OFD=$USE_OFD"
+ for facet in ${facets//,/ }; do
+ var=${facet}_FSTYPE
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ for var in MGSFSTYPE MDSFSTYPE OSTFSTYPE; do
+ if [ -n "${!var}" ]; then
+ echo -n " $var=${!var}"
+ fi
+ done
+
+ if [ -n "$FSTYPE" ]; then
+ echo -n " FSTYPE=$FSTYPE"
+ fi
}
do_nodes() {
do_node $HOST "$@"
}
+# Function: do_facet_random_file $FACET $FILE $SIZE
+# Creates FILE with random content on the given FACET of given SIZE
+
+do_facet_random_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/urandom of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
+do_facet_create_file() {
+ local facet="$1"
+ local fpath="$2"
+ local fsize="$3"
+ local cmd="dd if=/dev/zero of='$fpath' bs=$fsize count=1"
+ do_facet $facet "$cmd 2>/dev/null"
+}
+
do_nodesv() {
do_nodes --verbose "$@"
}
#if $OSTDEVn isn't defined, default is $OSTDEVBASE + num
eval DEVPTR=${!DEVNAME:=${OSTDEVBASE}${num}};;
zfs )
- #dataset name is independent of vdev device names
- eval DEVPTR=${FSNAME}-ost${num}/ost${num};;
+ #try $OSTDEVn then $OSTDEVBASE + num then zfs default
+ local foo=${OSTDEVBASE:-${FSNAME}-ost${num}/ost}${num}
+ eval DEVPTR=${!DEVNAME:=$foo};;
* )
error "unknown fstype!";;
esac
#if $MDSDEVn isn't defined, default is $MDSDEVBASE + num
eval DEVPTR=${!DEVNAME:=${MDSDEVBASE}${num}};;
zfs )
- #dataset name is independent of vdev device names
- eval DEVPTR=${FSNAME}-mdt${num}/mdt${num};;
+ # try $MDSDEVn then $MDSDEVBASE + num then zfs default
+ local foo=${MDSDEVBASE:-${FSNAME}-mdt${num}/mdt}${num}
+ eval DEVPTR=${!DEVNAME:=$foo};;
* )
error "unknown fstype!";;
esac
}
mgsdevname() {
- DEVNAME=MGSDEV
+ local DEVNAME=MGSDEV
+ local MDSDEV1=$(mdsdevname 1)
- local fstype=$(facet_fstype mds$num)
+ local fstype=$(facet_fstype mds1)
case $fstype in
- ldiskfs )
+ ldiskfs|zfs )
#if $MGSDEV isn't defined, default is $MDSDEV1
+ #ZFS independent mgsdev should be ${FSNAME}-mgs/mgs
eval DEVPTR=${!DEVNAME:=${MDSDEV1}};;
- zfs )
- #dataset name is independent of vdev device names
- eval DEVPTR=${FSNAME}-mgs/mgs;;
* )
error "unknown fstype!";;
esac
mgsvdevname() {
DEVNAME=MGSDEV
- local fstype=$(facet_fstype mds$num)
+ local fstype=$(facet_fstype mds1)
case $fstype in
ldiskfs )
}
combined_mgs_mds () {
- [[ $MDSDEV1 = $MGSDEV ]] && [[ $mds1_HOST = $mgs_HOST ]]
+ [[ "$(mdsdevname 1)" = "$(mgsdevname)" ]] &&
+ [[ "$(facet_host mds1)" = "$(facet_host mgs)" ]]
}
lower() {
mkfs_opts() {
local facet=$1
+ local dev=$2
+ local fsname=${3:-"$FSNAME"}
local type=$(facet_type $facet)
local index=$(($(facet_number $facet) - 1))
local fstype=$(facet_fstype $facet)
+ local host=$(facet_host $facet)
local opts
local fs_mkfs_opts
local var
return 1
fi
- if [ $type == MGS ] || ( [ $type == MDS ] && combined_mgs_mds ); then
+ if [ $type == MGS ] || ( [ $type == MDS ] &&
+ [ "$dev" == $(mgsdevname) ] &&
+ [ "$host" == "$(facet_host mgs)" ] ); then
opts="--mgs"
else
opts="--mgsnode=$MGSNID"
fi
if [ $type != MGS ]; then
- opts+=" --fsname=$FSNAME --$(lower ${type/MDS/MDT}) --index=$index"
+ opts+=" --fsname=$fsname --$(lower ${type/MDS/MDT}) \
+ --index=$index"
fi
var=${facet}failover_HOST
opts+=${L_GETIDENTITY:+" --param=mdt.identity_upcall=$L_GETIDENTITY"}
if [ $fstype == ldiskfs ]; then
- opts+=${IAMDIR:+" --iam-dir"}
-
fs_mkfs_opts+=${MDSJOURNALSIZE:+" -J size=$MDSJOURNALSIZE"}
fs_mkfs_opts+=${MDSISIZE:+" -i $MDSISIZE"}
fi
echo Formatting mgs, mds, osts
if ! combined_mgs_mds ; then
echo "Format mgs: $(mgsdevname)"
- add mgs $(mkfs_opts mgs) --reformat $(mgsdevname) \
- $(mgsvdevname) ${quiet:+>/dev/null} || exit 10
- fi
+ add mgs $(mkfs_opts mgs $(mgsdevname)) --reformat \
+ $(mgsdevname) $(mgsvdevname) ${quiet:+>/dev/null} ||
+ exit 10
+ fi
- for num in `seq $MDSCOUNT`; do
- echo "Format mds$num: $(mdsdevname $num)"
- add mds$num $(mkfs_opts mds$num) --reformat \
- $(mdsdevname $num) $(mdsvdevname $num) \
+ for num in $(seq $MDSCOUNT); do
+ echo "Format mds$num: $(mdsdevname $num)"
+ add mds$num $(mkfs_opts mds$num $(mdsdevname ${num})) \
+ --reformat $(mdsdevname $num) $(mdsvdevname $num) \
${quiet:+>/dev/null} || exit 10
- done
+ done
- for num in `seq $OSTCOUNT`; do
- echo "Format ost$num: $(ostdevname $num)"
- add ost$num $(mkfs_opts ost$num) --reformat \
- $(ostdevname $num) $(ostvdevname ${num}) \
+ for num in $(seq $OSTCOUNT); do
+ echo "Format ost$num: $(ostdevname $num)"
+ add ost$num $(mkfs_opts ost$num $(ostdevname ${num})) \
+ --reformat $(ostdevname $num) $(ostvdevname ${num}) \
${quiet:+>/dev/null} || exit 10
- done
+ done
}
mount_client() {
zconf_mount `hostname` $1 || error "mount failed"
}
-writeconf_facet () {
- local facet=$1
- local dev=$2
+writeconf_facet() {
+ local facet=$1
+ local dev=$2
- do_facet $facet "$TUNEFS --writeconf $dev"
+ stop ${facet} -f
+ rm -f ${facet}active
+ do_facet ${facet} "$TUNEFS --quiet --writeconf $dev" || return 1
+ return 0
}
writeconf_all () {
- for num in `seq $MDSCOUNT`; do
- DEVNAME=$(mdsdevname $num)
- writeconf_facet mds$num $DEVNAME
- done
+ local mdt_count=${1:-$MDSCOUNT}
+ local ost_count=${2:-$OSTCOUNT}
+ local rc=0
- for num in `seq $OSTCOUNT`; do
- DEVNAME=$(ostdevname $num)
- writeconf_facet ost$num $DEVNAME
- done
+ for num in $(seq $mdt_count); do
+ DEVNAME=$(mdsdevname $num)
+ writeconf_facet mds$num $DEVNAME || rc=$?
+ done
+
+ for num in $(seq $ost_count); do
+ DEVNAME=$(ostdevname $num)
+ writeconf_facet ost$num $DEVNAME || rc=$?
+ done
+ return $rc
}
setupall() {
}
init_facet_vars () {
- [ "$CLIENTONLY" ] && return 0
- local facet=$1
- shift
- local device=$1
+ [ "$CLIENTONLY" ] && return 0
+ local facet=$1
+ shift
+ local device=$1
- shift
+ shift
- eval export ${facet}_dev=${device}
- eval export ${facet}_opt=\"$@\"
+ eval export ${facet}_dev=${device}
+ eval export ${facet}_opt=\"$@\"
- local dev=${facet}_dev
- local label=$(devicelabel ${facet} ${!dev})
- [ -z "$label" ] && echo no label for ${!dev} && exit 1
+ local dev=${facet}_dev
- eval export ${facet}_svc=${label}
+ # We need to loop for the label
+ # in case its not initialized yet.
+ for wait_time in {0,1,3,5,10}; do
- local varname=${facet}failover_HOST
- if [ -z "${!varname}" ]; then
- eval $varname=$(facet_host $facet)
- fi
+ if [ $wait_time -gt 0 ]; then
+ echo "${!dev} not yet initialized,"\
+ "waiting ${wait_time} seconds."
+ sleep $wait_time
+ fi
- # ${facet}failover_dev is set in cfg file
- varname=${facet}failover_dev
- if [ -n "${!varname}" ] ; then
- eval export ${facet}failover_dev=${!varname}
- else
- eval export ${facet}failover_dev=$device
- fi
+ local label=$(devicelabel ${facet} ${!dev})
- # get mount point of already mounted device
- # is facet_dev is already mounted then use the real
- # mount point of this facet; otherwise use $(facet_mntpt $facet)
- # i.e. ${facet}_MOUNT if specified by user or default
- local mntpt=$(do_facet ${facet} cat /proc/mounts | \
- awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
- if [ -z $mntpt ]; then
- mntpt=$(facet_mntpt $facet)
- fi
- eval export ${facet}_MOUNT=$mntpt
+ # Check to make sure the label does
+ # not include ffff at the end of the label.
+ # This indicates it has not been initialized yet.
+
+ if [[ $label =~ [f|F]{4}$ ]]; then
+ # label is not initialized, unset the result
+ # and either try again or fail
+ unset label
+ else
+ break
+ fi
+ done
+
+ [ -z "$label" ] && echo no label for ${!dev} && exit 1
+
+ eval export ${facet}_svc=${label}
+
+ local varname=${facet}failover_HOST
+ if [ -z "${!varname}" ]; then
+ eval export $varname=$(facet_host $facet)
+ fi
+
+ varname=${facet}_HOST
+ if [ -z "${!varname}" ]; then
+ eval export $varname=$(facet_host $facet)
+ fi
+
+ # ${facet}failover_dev is set in cfg file
+ varname=${facet}failover_dev
+ if [ -n "${!varname}" ] ; then
+ eval export ${facet}failover_dev=${!varname}
+ else
+ eval export ${facet}failover_dev=$device
+ fi
+
+ # get mount point of already mounted device
+ # is facet_dev is already mounted then use the real
+ # mount point of this facet; otherwise use $(facet_mntpt $facet)
+ # i.e. ${facet}_MOUNT if specified by user or default
+ local mntpt=$(do_facet ${facet} cat /proc/mounts | \
+ awk '"'${!dev}'" == $1 && $3 == "lustre" { print $2 }')
+ if [ -z $mntpt ]; then
+ mntpt=$(facet_mntpt $facet)
+ fi
+ eval export ${facet}_MOUNT=$mntpt
}
init_facets_vars () {
- local DEVNAME
+ local DEVNAME
- if ! remote_mds_nodsh; then
- for num in `seq $MDSCOUNT`; do
- DEVNAME=`mdsdevname $num`
- init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
- done
- fi
+ if ! remote_mds_nodsh; then
+ for num in $(seq $MDSCOUNT); do
+ DEVNAME=`mdsdevname $num`
+ eval export MDSDEV${num}=$DEVNAME
+ init_facet_vars mds$num $DEVNAME $MDS_MOUNT_OPTS
+ done
+ fi
+ eval export MGSDEV=$(mgsdevname)
combined_mgs_mds || init_facet_vars mgs $(mgsdevname) $MGS_MOUNT_OPTS
- remote_ost_nodsh && return
-
- for num in `seq $OSTCOUNT`; do
- DEVNAME=`ostdevname $num`
- init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
- done
+ if ! remote_ost_nodsh; then
+ for num in $(seq $OSTCOUNT); do
+ DEVNAME=$(ostdevname $num)
+ eval export OSTDEV${num}=$DEVNAME
+ init_facet_vars ost$num $DEVNAME $OST_MOUNT_OPTS
+ done
+ fi
}
osc_ensure_active () {
[ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
}
+set_conf_param_and_check() {
+ local myfacet=$1
+ local TEST=$2
+ local PARAM=$3
+ local ORIG=$(do_facet $myfacet "$TEST")
+ if [ $# -gt 3 ]; then
+ local FINAL=$4
+ else
+ local -i FINAL
+ FINAL=$((ORIG + 5))
+ fi
+ echo "Setting $PARAM from $ORIG to $FINAL"
+ do_facet mgs "$LCTL conf_param $PARAM='$FINAL'" ||
+ error "conf_param $PARAM failed"
+
+ wait_update $(facet_host $myfacet) "$TEST" "$FINAL" ||
+ error "check $PARAM failed!"
+}
+
init_param_vars () {
- remote_mds_nodsh ||
- TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
+ remote_mds_nodsh ||
+ TIMEOUT=$(do_facet $SINGLEMDS "lctl get_param -n timeout")
- log "Using TIMEOUT=$TIMEOUT"
+ log "Using TIMEOUT=$TIMEOUT"
- osc_ensure_active $SINGLEMDS $TIMEOUT
- osc_ensure_active client $TIMEOUT
+ osc_ensure_active $SINGLEMDS $TIMEOUT
+ osc_ensure_active client $TIMEOUT
- if [ $QUOTA_AUTO -ne 0 ]; then
- if [ "$ENABLE_QUOTA" ]; then
- echo "enable quota as required"
- setup_quota $MOUNT || return 2
- else
- echo "disable quota as required"
- $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
- fi
- fi
+ local jobid_var
+ if [ -z "$(lctl get_param -n mdc.*.connect_flags | grep jobstats)" ]; then
+ jobid_var="none"
+ elif [ $JOBSTATS_AUTO -ne 0 ]; then
+ echo "enable jobstats, set job scheduler as $JOBID_VAR"
+ jobid_var=$JOBID_VAR
+ else
+ jobid_var=`$LCTL get_param -n jobid_var`
+ if [ $jobid_var != "disable" ]; then
+ echo "disable jobstats as required"
+ jobid_var="disable"
+ else
+ jobid_var="none"
+ fi
+ fi
- return 0
+ if [ $jobid_var == $JOBID_VAR -o $jobid_var == "disable" ]; then
+ do_facet mgs $LCTL conf_param $FSNAME.sys.jobid_var=$jobid_var
+ wait_update $HOSTNAME "$LCTL get_param -n jobid_var" \
+ $jobid_var || return 1
+ fi
+
+ if [ $QUOTA_AUTO -ne 0 ]; then
+ if [ "$ENABLE_QUOTA" ]; then
+ echo "enable quota as required"
+ setup_quota $MOUNT || return 2
+ else
+ echo "disable quota as required"
+ # $LFS quotaoff -ug $MOUNT > /dev/null 2>&1
+ fi
+ fi
+ return 0
}
nfs_client_mode () {
}
check_config_clients () {
- local clients=${CLIENTS:-$HOSTNAME}
- local mntpt=$1
+ local clients=${CLIENTS:-$HOSTNAME}
+ local mntpt=$1
- nfs_client_mode && return
+ nfs_client_mode && return
- do_rpc_nodes $clients check_config_client $mntpt
+ do_rpc_nodes "$clients" check_config_client $mntpt
- sanity_mount_check ||
- error "environments are insane!"
+ sanity_mount_check || error "environments are insane!"
}
check_timeout () {
# Get all of the server target devices from a given server node and type.
get_mnt_devs() {
- local node=$1
- local type=$2
- local obd_type
- local devs
- local dev
-
- case $type in
- mdt) obd_type="osd" ;;
- ost) obd_type="obdfilter" ;; # needs to be fixed when OST also uses an OSD
- *) echo "invalid server type" && return 1 ;;
- esac
+ local node=$1
+ local type=$2
+ local devs
+ local dev
- devs=$(do_node $node "lctl get_param -n $obd_type*.*.mntdev")
- for dev in $devs; do
- case $dev in
- *loop*) do_node $node "losetup $dev" | \
- sed -e "s/.*(//" -e "s/).*//" ;;
- *) echo $dev ;;
- esac
- done
+ if [ "$type" == ost ]; then
+ devs=$(get_obdfilter_param $node "" mntdev)
+ else
+ devs=$(do_node $node \
+ "lctl get_param -n osd-*.$FSNAME-M*.mntdev")
+ fi
+ for dev in $devs; do
+ case $dev in
+ *loop*) do_node $node "losetup $dev" | \
+ sed -e "s/.*(//" -e "s/).*//" ;;
+ *) echo $dev ;;
+ esac
+ done
}
# Get all of the server target devices.
local extra_opts=$3
df > /dev/null # update statfs data on disk
- local cmd="$E2FSCK -d -v -t -t -f -n $extra_opts $target_dev"
+ local cmd="$E2FSCK -d -v -t -t -f $extra_opts $target_dev"
echo $cmd
local rc=0
do_node $node $cmd || rc=$?
# verify a directory is shared among nodes.
check_shared_dir() {
- local dir=$1
+ local dir=$1
- [ -z "$dir" ] && return 1
- do_rpc_nodes $(comma_list $(nodes_list)) check_logdir $dir
- check_write_access $dir || return 1
- return 0
+ [ -z "$dir" ] && return 1
+ do_rpc_nodes "$(comma_list $(nodes_list))" check_logdir $dir
+ check_write_access $dir || return 1
+ return 0
}
# Run e2fsck on MDT and OST(s) to generate databases used for lfsck.
local ostidx
local dev
+ [[ $(lustre_version_code $SINGLEMDS) -ne $(version_code 2.2.0) ]] ||
+ { skip "Lustre 2.2.0 lacks the patch for LU-1255"; exit 0; }
+
check_shared_dir $SHARED_DIRECTORY ||
error "$SHARED_DIRECTORY isn't a shared directory"
[ $MDSCOUNT -eq 1 ] || error "CMD is not supported"
- run_e2fsck $(mdts_nodes) $MDTDEV "--mdsdb $MDSDB"
+ run_e2fsck $(mdts_nodes) $MDTDEV "-n --mdsdb $MDSDB"
i=0
ostidx=0
OSTDB_LIST=""
for node in $(osts_nodes); do
for dev in ${OSTDEVS[i]}; do
- run_e2fsck $node $dev "--mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
+ run_e2fsck $node $dev "-n --mdsdb $MDSDB --ostdb $OSTDB-$ostidx"
OSTDB_LIST="$OSTDB_LIST $OSTDB-$ostidx"
ostidx=$((ostidx + 1))
done
run_lfsck
fi
- if is_mounted $MOUNT; then
- [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
- error "remove sub-test dirs failed"
- [ "$ENABLE_QUOTA" ] && restore_quota_type || true
- fi
+ if is_mounted $MOUNT; then
+ [ -n "$DIR" ] && rm -rf $DIR/[Rdfs][0-9]* ||
+ error "remove sub-test dirs failed"
+ [ "$ENABLE_QUOTA" ] && restore_quota || true
+ fi
if [ "$I_UMOUNTED2" = "yes" ]; then
restore_mount $MOUNT2 || error "restore $MOUNT2 failed"
eval $@
}
+# Convert a space-delimited list to a comma-delimited list. If the input is
+# only whitespace, ensure the output is empty (i.e. "") so [ -n $list ] works
comma_list() {
- # the sed converts spaces to commas, but leaves the last space
- # alone, so the line doesn't end with a comma.
- echo "$*" | tr -s " " "\n" | sort -b -u | tr "\n" " " | sed 's/ \([^$]\)/,\1/g'
+ # echo is used to convert newlines to spaces, since it doesn't
+ # introduce a trailing space as using "tr '\n' ' '" does
+ echo $(tr -s " " "\n" <<< $* | sort -b -u) | tr ' ' ','
}
list_member () {
at_get $1 at_max
}
+at_min_get() {
+ at_get $1 at_min
+}
+
at_max_set() {
local at_max=$1
shift
return $RC
}
+drop_update_reply() {
+# OBD_FAIL_MDS_OBJ_UPDATE_NET
+ local index=$1
+ shift 1
+ RC=0
+ do_facet mds${index} lctl set_param fail_loc=0x188
+ do_facet client "$@" || RC=$?
+ do_facet mds${index} lctl set_param fail_loc=0
+ return $RC
+}
+
pause_bulk() {
#define OBD_FAIL_OST_BRW_PAUSE_BULK 0x214
RC=0
}
drop_ldlm_cancel() {
-#define OBD_FAIL_LDLM_CANCEL 0x304
+#define OBD_FAIL_LDLM_CANCEL_NET 0x304
local RC=0
local list=$(comma_list $(mdts_nodes) $(osts_nodes))
do_nodes $list lctl set_param fail_loc=0x304
}
drop_bl_callback() {
-#define OBD_FAIL_LDLM_BL_CALLBACK 0x305
- RC=0
- do_facet client lctl set_param fail_loc=0x305
- do_facet client "$@" || RC=$?
- do_facet client lctl set_param fail_loc=0
- return $RC
+#define OBD_FAIL_LDLM_BL_CALLBACK_NET 0x305
+ RC=0
+ do_facet client lctl set_param fail_loc=0x80000305
+ do_facet client "$@" || RC=$?
+ do_facet client lctl set_param fail_loc=0
+ return $RC
}
drop_ldlm_reply() {
debugrestore
}
+# prints bash call stack
+log_trace_dump() {
+ echo " Trace dump:"
+ for (( i=1; i < ${#BASH_LINENO[*]} ; i++ )) ; do
+ local s=${BASH_SOURCE[$i]}
+ local l=${BASH_LINENO[$i-1]}
+ local f=${FUNCNAME[$i]}
+ echo " = $s:$l:$f()"
+ done
+}
+
##################################
# Test interface
##################################
fi
log " ${TESTSUITE} ${TESTNAME}: @@@@@@ ${TYPE}: $@ "
+ log_trace_dump
mkdir -p $LOGDIR
# We need to dump the logs on all nodes
gather_logs $(comma_list $(nodes_list))
fi
- debugrestore
- [ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
- echo "$@" > $LOGDIR/err
+ debugrestore
+ [ "$TESTSUITELOG" ] &&
+ echo "$TESTSUITE: $TYPE: $TESTNAME $@" >> $TESTSUITELOG
+ echo "$@" > $LOGDIR/err
}
exit_status () {
- local status=0
- local log=$TESTSUITELOG
+ local status=0
+ local log=$TESTSUITELOG
- [ -f "$log" ] && grep -q FAIL: $log && status=1
- exit $status
+ [ -f "$log" ] && grep -q FAIL $log && status=1
+ exit $status
}
error() {
error_noexit "$@"
}
+error_and_remount() {
+ error_noexit "$@"
+ remount_client $MOUNT
+ exit 1
+}
+
skip_env () {
$FAIL_ON_SKIP_ENV && error false $@ || skip $@
}
-skip () {
- echo
- log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
- [ "$ALWAYS_SKIPPED" ] && \
- skip_logged ${TESTNAME} "$@" || true
- [ "$TESTSUITELOG" ] && \
- echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
+skip() {
+ echo
+ log " SKIP: $TESTSUITE $TESTNAME $@"
+
+ if [[ -n "$ALWAYS_SKIPPED" ]]; then
+ skip_logged $TESTNAME "$@"
+ else
+ mkdir -p $LOGDIR
+ echo "$@" > $LOGDIR/skip
+ fi
+
+ [[ -n "$TESTSUITELOG" ]] &&
+ echo "$TESTSUITE: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
}
build_test_filter() {
echo -n "."
return 0
fi
+
+ LAST_SKIPPED="y"
+ ALWAYS_SKIPPED="y"
testname=EXCEPT_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1"
return 0
fi
testname=EXCEPT_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_ALWAYS_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
- ALWAYS_SKIPPED="y"
TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1"
return 0
fi
testname=EXCEPT_ALWAYS_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
- ALWAYS_SKIPPED="y"
TESTNAME=test_$1 skip "skipping ALWAYS excluded test $1 (base $base)"
return 0
fi
testname=EXCEPT_SLOW_$1
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1"
return 0
fi
testname=EXCEPT_SLOW_$base
if [ ${!testname}x != x ]; then
- LAST_SKIPPED="y"
TESTNAME=test_$1 skip "skipping SLOW test $1 (base $base)"
return 0
fi
return $?
}
-equals_msg() {
- banner "$*"
-}
-
log() {
echo "$*"
module_loaded lnet || load_modules
}
complete () {
- equals_msg $1 test complete, duration $2 sec
+ local duration=$1
+
+ banner test complete, duration $duration sec
[ -f "$TESTSUITELOG" ] && egrep .FAIL $TESTSUITELOG || true
- echo duration $2 >>$TESTSUITELOG
+ echo duration $duration >>$TESTSUITELOG
}
pass() {
- # Set TEST_STATUS here; will be used for logging the result
- if [ -f $LOGDIR/err ]; then
- TEST_STATUS="FAIL"
- else
- TEST_STATUS="PASS"
- fi
- echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
+ # Set TEST_STATUS here. It will be used for logging the result.
+ TEST_STATUS="PASS"
+
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_STATUS="FAIL"
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_STATUS="SKIP"
+ fi
+ echo "$TEST_STATUS $@" 2>&1 | tee -a $TESTSUITELOG
}
check_mds() {
run_one() {
local testnum=$1
local message=$2
- tfile=f${testnum}
+ tfile=f.${TESTSUITE}.${testnum}
export tdir=d0.${TESTSUITE}/d${base}
export TESTNAME=test_$testnum
local SAVE_UMASK=`umask`
# - test result is saved to data file
#
run_one_logged() {
- local BEFORE=`date +%s`
- local TEST_ERROR
- local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
- local test_log=$LOGDIR/$name
- rm -rf $LOGDIR/err
- local SAVE_UMASK=`umask`
- umask 0022
-
- echo
- log_sub_test_begin test_${1}
- (run_one $1 "$2") 2>&1 | tee -i $test_log
- local RC=${PIPESTATUS[0]}
-
- [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
- echo "test_$1 returned $RC" | tee $LOGDIR/err
+ local BEFORE=`date +%s`
+ local TEST_ERROR
+ local name=${TESTSUITE}.test_${1}.test_log.$(hostname -s).log
+ local test_log=$LOGDIR/$name
+ rm -rf $LOGDIR/err
+ rm -rf $LOGDIR/skip
+ local SAVE_UMASK=`umask`
+ umask 0022
+
+ echo
+ log_sub_test_begin test_${1}
+ (run_one $1 "$2") 2>&1 | tee -i $test_log
+ local RC=${PIPESTATUS[0]}
+
+ [ $RC -ne 0 ] && [ ! -f $LOGDIR/err ] && \
+ echo "test_$1 returned $RC" | tee $LOGDIR/err
+
+ duration=$((`date +%s` - $BEFORE))
+ pass "$1" "(${duration}s)"
+
+ if [[ -f $LOGDIR/err ]]; then
+ TEST_ERROR=$(cat $LOGDIR/err)
+ elif [[ -f $LOGDIR/skip ]]; then
+ TEST_ERROR=$(cat $LOGDIR/skip)
+ fi
+ log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
- duration=$((`date +%s` - $BEFORE))
- pass "$1" "(${duration}s)"
- [ -f $LOGDIR/err ] && TEST_ERROR=$(cat $LOGDIR/err)
- log_sub_test_end $TEST_STATUS $duration "$RC" "$TEST_ERROR"
+ if [ -f $LOGDIR/err ]; then
+ $FAIL_ON_ERROR && exit $RC
+ fi
- if [ -f $LOGDIR/err ]; then
- $FAIL_ON_ERROR && exit $RC
- fi
+ umask $SAVE_UMASK
- umask $SAVE_UMASK
-
- return $RC
+ return 0
}
#
# Print information of skipped tests to result.yml
#
skip_logged(){
- log_sub_test_begin $1
- log_sub_test_end "SKIP" "0" "0" "\"$2\""
+ log_sub_test_begin $1
+ shift
+ log_sub_test_end "SKIP" "0" "0" "$@"
}
canonical_path() {
$LFS mdts $2 | sed -ne "/^$1: /s/.* \(.*\) .*$/\1/p"
}
+# Description:
+# Return unique identifier for given hostname
+host_id() {
+ local host_name=$1
+ echo $host_name | md5sum | cut -d' ' -f1
+}
+
+# Description:
+# Returns list of ip addresses for each interface
+local_addr_list() {
+ ip addr | awk '/inet\ / {print $2}' | awk -F\/ '{print $1}'
+}
+
+is_local_addr() {
+ local addr=$1
+ # Cache address list to avoid mutiple execution of local_addr_list
+ LOCAL_ADDR_LIST=${LOCAL_ADDR_LIST:-$(local_addr_list)}
+ local i
+ for i in $LOCAL_ADDR_LIST ; do
+ [[ "$i" == "$addr" ]] && return 0
+ done
+ return 1
+}
+
+local_node() {
+ local host_name=$1
+ local is_local="IS_LOCAL_$(host_id $host_name)"
+ if [ -z "${!is_local-}" ] ; then
+ eval $is_local=0
+ local host_ip=$($LUSTRE/tests/resolveip $host_name)
+ is_local_addr "$host_ip" && eval $is_local=1
+ fi
+ [[ "${!is_local}" == "1" ]]
+}
+
remote_node () {
- local node=$1
- [ "$node" != "$(hostname)" ]
+ local node=$1
+ local_node $node && return 1
+ return 0
}
remote_mds ()
}
remote_nodes_list () {
- local rnodes=$(nodes_list)
- rnodes=$(echo " $rnodes " | sed -re "s/\s+$HOSTNAME\s+/ /g")
- echo $rnodes
+ echo $(nodes_list) | sed -re "s/\<$HOSTNAME\>//g"
}
init_clients_lists () {
do_nodev $nfsserver lfs setstripe "$@"
}
+# Check and add a test group.
+add_group() {
+ local group_id=$1
+ local group_name=$2
+ local rc=0
+
+ local gid=$(getent group $group_name | cut -d: -f3)
+ if [[ -n "$gid" ]]; then
+ [[ "$gid" -eq "$group_id" ]] || {
+ error_noexit "inconsistent group ID:" \
+ "new: $group_id, old: $gid"
+ rc=1
+ }
+ else
+ groupadd -g $group_id $group_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
+# Check and add a test user.
+add_user() {
+ local user_id=$1
+ shift
+ local user_name=$1
+ shift
+ local group_name=$1
+ shift
+ local home=$1
+ shift
+ local opts="$@"
+ local rc=0
+
+ local uid=$(getent passwd $user_name | cut -d: -f3)
+ if [[ -n "$uid" ]]; then
+ if [[ "$uid" -eq "$user_id" ]]; then
+ local dir=$(getent passwd $user_name | cut -d: -f6)
+ if [[ "$dir" != "$home" ]]; then
+ mkdir -p $home
+ usermod -d $home $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+ else
+ error_noexit "inconsistent user ID:" \
+ "new: $user_id, old: $uid"
+ rc=1
+ fi
+ else
+ mkdir -p $home
+ useradd -M -u $user_id -d $home -g $group_name $opts $user_name
+ rc=${PIPESTATUS[0]}
+ fi
+
+ return $rc
+}
+
check_runas_id_ret() {
local myRC=0
local myRUNAS_UID=$1
}
check_catastrophe() {
- local rnodes=${1:-$(comma_list $(remote_nodes_list))}
- local C=$CATASTROPHE
- [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
+ local rnodes=${1:-$(comma_list $(remote_nodes_list))}
+ local C=$CATASTROPHE
+ [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
+
+ [ -z "$rnodes" ] && return 0
- if [ $rnodes ]; then
- do_nodes $rnodes "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
-if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
-exit \\\$rc;"
- fi
+ do_nodes "$rnodes" "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
+ if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
+ exit \\\$rc;"
}
# CMD: determine mds index where directory inode presents
# 2. wait the deadline of client 2nd request
local maxtime=$(( 2 * $(request_timeout $facet)))
- if ! do_rpc_nodes $(facet_host $facet) \
- _wait_import_state $expected $param $maxtime; then
- error "import is not in ${expected} state"
- return 1
- fi
+ if ! do_rpc_nodes "$(facet_host $facet)" \
+ _wait_import_state $expected $param $maxtime; then
+ error "import is not in ${expected} state"
+ return 1
+ fi
- return 0
+ return 0
}
get_clientmdc_proc_path() {
}
do_rpc_nodes () {
- local list=$1
- shift
+ local list=$1
+ shift
- # Add paths to lustre tests for 32 and 64 bit systems.
- local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
- do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
+ [ -z "$list" ] && return 0
+
+ # Add paths to lustre tests for 32 and 64 bit systems.
+ local RPATH="PATH=$RLUSTRE/tests:/usr/lib/lustre/tests:/usr/lib64/lustre/tests:$PATH"
+ do_nodesv $list "${RPATH} NAME=${NAME} sh rpc.sh $@ "
}
wait_clients_import_state () {
local params=$(expand_list $params $proc_path)
done
- if ! do_rpc_nodes $list wait_import_state $expected $params; then
- error "import is not in ${expected} state"
- return 1
- fi
+ if ! do_rpc_nodes "$list" wait_import_state $expected $params; then
+ error "import is not in ${expected} state"
+ return 1
+ fi
}
oos_full() {
- local -a AVAILA
- local -a GRANTA
- local OSCFULL=1
- AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param obdfilter.*.kbytesavail))
- GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
- $LCTL get_param -n obdfilter.*.tot_granted))
- for ((i=0; i<${#AVAILA[@]}; i++)); do
- local -a AVAIL1=(${AVAILA[$i]//=/ })
- GRANT=$((${GRANTA[$i]}/1024))
- echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} grnt=$GRANT diff=$((AVAIL1[1] - GRANT))
- [ $((AVAIL1[1] - GRANT)) -lt 400 ] && OSCFULL=0 && echo " FULL" || echo
- done
- return $OSCFULL
+ local -a AVAILA
+ local -a GRANTA
+ local -a TOTALA
+ local OSCFULL=1
+ AVAILA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param obdfilter.*.kbytesavail))
+ GRANTA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.tot_granted))
+ TOTALA=($(do_nodes $(comma_list $(osts_nodes)) \
+ $LCTL get_param -n obdfilter.*.kbytestotal))
+ for ((i=0; i<${#AVAILA[@]}; i++)); do
+ local -a AVAIL1=(${AVAILA[$i]//=/ })
+ local -a TOTAL=(${TOTALA[$i]//=/ })
+ GRANT=$((${GRANTA[$i]}/1024))
+ # allow 1% of total space in bavail because of delayed
+ # allocation with ZFS which might release some free space after
+ # txg commit. For small devices, we set a mininum of 8MB
+ local LIMIT=$((${TOTAL} / 100 + 8000))
+ echo -n $(echo ${AVAIL1[0]} | cut -d"." -f2) avl=${AVAIL1[1]} \
+ grnt=$GRANT diff=$((AVAIL1[1] - GRANT)) limit=${LIMIT}
+ [ $((AVAIL1[1] - GRANT)) -lt $LIMIT ] && OSCFULL=0 && \
+ echo " FULL" || echo
+ done
+ return $OSCFULL
}
pool_list () {
{
local dir=$1
local llverfs_opts=$2
+ local use_partial_arg=$3
local partial_arg=""
local size=$(df -B G $dir |tail -n 1 |awk '{print $2}' |sed 's/G//') #GB
# Run in partial (fast) mode if the size
# of a partition > 1 GB
- [ $size -gt 1 ] && partial_arg="-p"
+ [ "x$use_partial_arg" != "xno" ] && [ $size -gt 1 ] && partial_arg="-p"
llverfs $partial_arg $llverfs_opts $dir
}
# Check whether the "large_xattr" feature is enabled or not.
large_xattr_enabled() {
- local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+ [[ $(facet_fstype $SINGLEMDS) == zfs ]] && return 0
- do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
- return ${PIPESTATUS[0]}
+ local mds_dev=$(mdsdevname ${SINGLEMDS//mds/})
+
+ do_facet $SINGLEMDS "$DUMPE2FS -h $mds_dev 2>&1 | grep -q large_xattr"
+ return ${PIPESTATUS[0]}
}
# Get the maximum xattr size supported by the filesystem.
local metaea=${TMP}/backup_restore.ea
local metadata=${TMP}/backup_restore.tgz
local opts=${MDS_MOUNT_OPTS}
+ local svc=${SINGLEMDS}_svc
if ! ${rcmd} test -b ${devname}; then
opts=$(csa_add "$opts" -o loop)
${rcmd} umount -d $mntpt || return 10
# step 14: cleanup tmp backup
${rcmd} rm -f $metaea $metadata
+ # step 15: reset device label - it's not virgin on
+ ${rcmd} e2label $devname ${!svc}
}
# remove OI files
${rcmd} umount -d $mntpt || return 2
# OI files will be recreated when mounted as lustre next time.
}
+
+# generate maloo upload-able log file name
+# \param logname specify unique part of file name
+generate_logname() {
+ local logname=${1:-"default_logname"}
+
+ echo "$TESTLOG_PREFIX.$TESTNAME.$logname.$(hostname -s).log"
+}
+
+# mkdir directory on different MDTs
+test_mkdir() {
+ local option
+ local parent
+ local child
+ local path
+ local dir
+ local rc=0
+
+ if [ $# -eq 2 ]; then
+ option=$1
+ path=$2
+ else
+ path=$1
+ fi
+
+ child=${path##*/}
+ parent=${path%/*}
+
+ if [ "$parent" == "$child" ]; then
+ parent=$(pwd)
+ fi
+
+ if [ "$option" == "-p" -a -d ${parent}/${child} ]; then
+ return $rc
+ fi
+
+ # it needs to check whether there is further / in child
+ dir=$(echo $child | awk -F '/' '{print $2}')
+ if [ ! -z "$dir" ]; then
+ local subparent=$(echo $child | awk -F '/' '{ print $1 }')
+ parent=${parent}"/"${subparent}
+ child=$dir
+ fi
+
+ if [ ! -d ${parent} ]; then
+ if [ "$option" == "-p" ]; then
+ mkdir -p ${parent}
+ else
+ return 1
+ fi
+ fi
+
+ if [ $MDSCOUNT -le 1 ]; then
+ mkdir $option ${parent}/${child} || rc=$?
+ else
+ local mdt_idx=$($LFS getstripe -M $parent)
+
+ if [ "$mdt_idx" -ne 0 ]; then
+ mkdir $option ${parent}/${child} || rc=$?
+ return $rc
+ fi
+
+ local test_num=$(echo $testnum | sed -e 's/[^0-9]*//g')
+ local mdt_idx=$((test_num % MDSCOUNT))
+ echo "mkdir $mdt_idx for ${parent}/${child}"
+ $LFS setdirstripe -i $mdt_idx ${parent}/${child} || rc=$?
+ fi
+ return $rc
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff