#export PDSH="pdsh -S -Rssh -w"
# function used by scripts run on remote nodes
-. $(dirname $0)/functions.sh
+LUSTRE=${LUSTRE:-$(cd $(dirname $0)/..; echo $PWD)}
+. $LUSTRE/tests/functions.sh
assert_DIR () {
local failed=""
if ! echo $PATH | grep -q $LUSTRE/tests; then
export PATH=$PATH:$LUSTRE/tests
fi
- export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mdsrate"}
+ export MDSRATE=${MDSRATE:-"$LUSTRE/tests/mpi/mdsrate"}
[ ! -f "$MDSRATE" ] && export MDSRATE=$(which mdsrate 2> /dev/null)
if ! echo $PATH | grep -q $LUSTRE/tests/racer; then
export PATH=$PATH:$LUSTRE/tests/racer
fi
+ if ! echo $PATH | grep -q $LUSTRE/tests/mpi; then
+ export PATH=$PATH:$LUSTRE/tests/mpi
+ fi
export LCTL=${LCTL:-"$LUSTRE/utils/lctl"}
[ ! -f "$LCTL" ] && export LCTL=$(which lctl)
export LFS=${LFS:-"$LUSTRE/utils/lfs"}
[ "$GSS_PIPEFS" = "true" ] && [ ! -f "$LGSSD" ] && \
export LGSSD=$(which lgssd)
export LSVCGSSD=${LSVCGSSD:-"$LUSTRE/utils/gss/lsvcgssd"}
- [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd)
+ [ ! -f "$LSVCGSSD" ] && export LSVCGSSD=$(which lsvcgssd 2> /dev/null)
export KRB5DIR=${KRB5DIR:-"/usr/kerberos"}
export DIR2
export SAVE_PWD=${SAVE_PWD:-$LUSTRE/tests}
echo Loading modules from $LUSTRE
load_module ../libcfs/libcfs/libcfs
- [ "$PTLDEBUG" ] && lctl set_param debug=$PTLDEBUG
- [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug=${SUBSYSTEM# }
+ [ "$PTLDEBUG" ] && lctl set_param debug="$PTLDEBUG"
+ [ "$SUBSYSTEM" ] && lctl set_param subsystem_debug="${SUBSYSTEM# }"
local MODPROBECONF=
[ -f /etc/modprobe.conf ] && MODPROBECONF=/etc/modprobe.conf
[ ! "$MODPROBECONF" -a -d /etc/modprobe.d ] && MODPROBECONF=/etc/modprobe.d/Lustre
mount_facet() {
local facet=$1
shift
- local dev=${facet}_dev
+ local dev=$(facet_active $facet)_dev
local opt=${facet}_opt
echo "Starting ${facet}: ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}"
do_facet ${facet} mount -t lustre ${!opt} $@ ${!dev} ${MOUNT%/*}/${facet}
echo "mount -t lustre $@ ${!dev} ${MOUNT%/*}/${facet}"
echo "Start of ${!dev} on ${facet} failed ${RC}"
else
- do_facet ${facet} "lctl set_param debug=$PTLDEBUG; \
- lctl set_param subsystem_debug=${SUBSYSTEM# }; \
+ do_facet ${facet} "lctl set_param debug=\\\"$PTLDEBUG\\\"; \
+ lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\"; \
lctl set_param debug_mb=${DEBUG_SIZE}; \
sync"
shift
eval export ${facet}_dev=${device}
eval export ${facet}_opt=\"$@\"
+
+ local varname=${facet}failover_dev
+ if [ -n "${!varname}" ] ; then
+ eval export ${facet}failover_dev=${!varname}
+ else
+ eval export ${facet}failover_dev=$device
+ fi
+
do_facet ${facet} mkdir -p ${MOUNT%/*}/${facet}
mount_facet ${facet}
RC=$?
}
# save quota version (both administrative and operational quotas)
+# add an additional parameter if mountpoint is ever different from $MOUNT
quota_save_version() {
local fsname=${2:-$FSNAME}
- do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$1"
+ local spec=$1
+ local ver=$(tr -c -d "123" <<< $spec)
+ local type=$(tr -c -d "ug" <<< $spec)
+
+ [ -n "$ver" -a "$ver" != "3" ] && error "wrong quota version specifier"
+
+ $LFS quotaoff -ug $MOUNT # just in case
+ [ -n "$type" ] && { $LFS quotacheck -$type $MOUNT || error "quotacheck has failed"; }
+
+ do_facet mgs "lctl conf_param ${fsname}-MDT*.mdd.quota_type=$spec"
local varsvc
local osts=$(get_facets OST)
for ost in ${osts//,/ }; do
varsvc=${ost}_svc
- do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$1"
+ do_facet mgs "lctl conf_param ${!varsvc}.ost.quota_type=$spec"
done
}
if [ ! "$old_QUOTA_TYPE" ] || [ "$quota_type" = "$old_QUOTA_TYPE" ]; then
return
fi
- $LFS quotaoff $mntpt
quota_save_version $old_QUOTA_TYPE
- $LFS quotacheck -ug $mntpt
}
setup_quota(){
# Suppose that quota type the same on mds and ost
local quota_type=$(quota_type | grep MDT | cut -d "=" -f2)
[ ${PIPESTATUS[0]} -eq 0 ] || error "quota_type failed!"
+ echo "[HOST:$HOSTNAME] [old_quota_type:$quota_type] [new_quota_type:$QUOTA_TYPE]"
if [ "$quota_type" != "$QUOTA_TYPE" ]; then
export old_QUOTA_TYPE=$quota_type
quota_save_version $QUOTA_TYPE
- $LFS quotacheck -ug $mntpt
fi
local quota_usrs=$QUOTA_USERS
local cmd
for usr in $quota_usrs; do
- echo "Setting up quota on $client:$mntpt for $usr..."
+ echo "Setting up quota on $HOSTNAME:$mntpt for $usr..."
for type in u g; do
cmd="$LFS setquota -$type $usr -b $blk_soft -B $blk_hard -i $i_soft -I $i_hard $mntpt"
echo "+ $cmd"
do_node $client mkdir -p $mnt
do_node $client mount -t lustre $OPTIONS $device $mnt || return 1
- do_node $client "lctl set_param debug=$PTLDEBUG;
- lctl set_param subsystem_debug=${SUBSYSTEM# };
+ do_node $client "lctl set_param debug=\\\"$PTLDEBUG\\\";
+ lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
lctl set_param debug_mb=${DEBUG_SIZE}"
return 0
}
sanity_mount_check_servers () {
+ [ "$CLIENTONLY" ] &&
+ { echo "CLIENTONLY mode, skip mount_check_servers"; return 0; } || true
echo Checking servers environments
# FIXME: modify get_facets to display all facets wo params
echo "Started clients $clients: "
do_nodes $clients "mount | grep -w $mnt"
- do_nodes $clients "lctl set_param debug=$PTLDEBUG;
- lctl set_param subsystem_debug=${SUBSYSTEM# };
+ do_nodes $clients "lctl set_param debug=\\\"$PTLDEBUG\\\";
+ lctl set_param subsystem_debug=\\\"${SUBSYSTEM# }\\\";
lctl set_param debug_mb=${DEBUG_SIZE};"
return 0
shift
local progs=$@
- do_nodes $clients "set -x ; PATH=:$PATH status=true; for prog in $progs; do
- which \\\$prog || { echo \\\$prog missing on \\\$(hostname) && status=false; }
- done;
- eval \\\$status"
+ do_nodes $clients "set -x ; PATH=:$PATH; status=true;
+for prog in $progs; do
+ if ! [ \\\"\\\$(which \\\$prog)\\\" -o \\\"\\\${!prog}\\\" ]; then
+ echo \\\$prog missing on \\\$(hostname);
+ status=false;
+ fi
+done;
+eval \\\$status"
+}
+
+client_var_name() {
+ echo __$(echo $1 | tr '-' 'X')
}
start_client_load() {
local client=$1
- local var=${client}_load
+ local load=$2
+ local var=$(client_var_name $client)_load
+ eval export ${var}=$load
do_node $client "PATH=$PATH MOUNT=$MOUNT ERRORS_OK=$ERRORS_OK \
BREAK_ON_ERROR=$BREAK_ON_ERROR \
END_RUN_FILE=$END_RUN_FILE \
LOAD_PID_FILE=$LOAD_PID_FILE \
TESTSUITELOG=$TESTSUITELOG \
- run_${!var}.sh" &
+ run_${load}.sh" &
CLIENT_LOAD_PIDS="$CLIENT_LOAD_PIDS $!"
- log "Started client load: ${!var} on $client"
+ log "Started client load: ${load} on $client"
return 0
}
for ((nodenum=0; nodenum < ${#clients[@]}; nodenum++ )); do
testnum=$((nodenum % numloads))
- eval export ${clients[nodenum]}_load=${CLIENT_LOADS[testnum]}
- start_client_load ${clients[nodenum]}
+ start_client_load ${clients[nodenum]} ${CLIENT_LOADS[testnum]}
done
}
# only for remote client
check_client_load () {
local client=$1
- local var=${client}_load
-
+ local var=$(client_var_name $client)_load
local TESTLOAD=run_${!var}.sh
ps auxww | grep -v grep | grep $client | grep -q "$TESTLOAD" || return 1
-
- check_catastrophe $client || return 2
-
- # see if the load is still on the client
+
+ # bug 18914: try to connect several times not only when
+ # check ps, but while check_catastrophe also
local tries=3
local RC=254
while [ $RC = 254 -a $tries -gt 0 ]; do
let tries=$tries-1
# assume success
RC=0
+ if ! check_catastrophe $client; then
+ RC=${PIPESTATUS[0]}
+ if [ $RC -eq 254 ]; then
+ # FIXME: not sure how long we shuold sleep here
+ sleep 10
+ continue
+ fi
+ echo "check catastrophe failed: RC=$RC "
+ return $RC
+ fi
+ done
+ # We can continue try to connect if RC=254
+ # Just print the warning about this
+ if [ $RC = 254 ]; then
+ echo "got a return status of $RC from do_node while checking catastrophe on $client"
+ fi
+
+ # see if the load is still on the client
+ tries=3
+ RC=254
+ while [ $RC = 254 -a $tries -gt 0 ]; do
+ let tries=$tries-1
+ # assume success
+ RC=0
if ! do_node $client "ps auxwww | grep -v grep | grep -q $TESTLOAD"; then
RC=${PIPESTATUS[0]}
sleep 30
fi
done
if [ $RC = 254 ]; then
- echo "got a return status of $RC from do_node while checking (i.e. with 'ps') the client load on the remote system"
+ echo "got a return status of $RC from do_node while checking (catastrophe and 'ps') the client load on $client"
# see if we can diagnose a bit why this is
fi
local RESULT
local WAIT=0
local sleep=5
- while [ $WAIT -lt $MAX ]; do
+ while [ true ]; do
RESULT=$(do_node $node "$TEST")
if [ "$RESULT" == "$FINAL" ]; then
echo "Updated after $WAIT sec: wanted '$FINAL' got '$RESULT'"
return 0
fi
+ [ $WAIT -ge $MAX ] && break
echo "Waiting $((MAX - WAIT)) secs for update"
WAIT=$((WAIT + sleep))
sleep $sleep
wait_update_facet () {
local facet=$1
- wait_update $(facet_host $facet) $@
+ wait_update $(facet_active_host $facet) "$@"
}
wait_delete_completed () {
shutdown_facet $facet
[ -n "$sleep_time" ] && sleep $sleep_time
reboot_facet $facet
- client_df &
- DFPID=$!
- echo "df pid is $DFPID"
change_active $facet
local TO=`facet_active_host $facet`
echo "Failover $facet to $TO"
do_facet $facet sync
df $MOUNT
local svc=${facet}_svc
- do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL --device %${!svc} notransno
+ do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
$LCTL mark "local REPLAY BARRIER on ${!svc}"
}
do_facet $facet sync
local svc=${facet}_svc
echo Replay barrier on ${!svc}
- do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL --device %${!svc} notransno
+ do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
$LCTL mark "local REPLAY BARRIER on ${!svc}"
}
local facet=$1 echo running=${running}
local svc=${facet}_svc
echo Replay barrier on ${!svc}
- do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL --device %${!svc} notransno
+ do_facet $facet $LCTL --device %${!svc} readonly
do_facet $facet $LCTL mark "$facet REPLAY BARRIER on ${!svc}"
$LCTL mark "local REPLAY BARRIER on ${!svc}"
}
fail() {
facet_failover $* || error "failover: $?"
- df $MOUNT || error "post-failover df: $?"
+ client_df || error "post-failover df: $?"
}
fail_nodf() {
stop $facet
change_active $facet
mount_facet $facet -o abort_recovery
- df $MOUNT || echo "first df failed: $?"
+ client_df || echo "first df failed: $?"
sleep 1
- df $MOUNT || error "post-failover df: $?"
+ client_df || error "post-failover df: $?"
}
do_lmc() {
change_active() {
local facet=$1
- failover=${facet}failover
+ local failover=${facet}failover
host=`facet_host $failover`
[ -z "$host" ] && return
- curactive=`facet_active $facet`
+ local curactive=`facet_active $facet`
if [ -z "${curactive}" -o "$curactive" == "$failover" ] ; then
eval export ${facet}active=$facet
else
eval export ${facet}active=$failover
fi
# save the active host for this facet
- activevar=${facet}active
+ local activevar=${facet}active
echo "$activevar=${!activevar}" > $TMP/$activevar
}
}
do_facet() {
- facet=$1
+ local facet=$1
shift
- HOST=`facet_active_host $facet`
+ local HOST=`facet_active_host $facet`
[ -z $HOST ] && echo No host defined for facet ${facet} && exit 1
do_node $HOST "$@"
}
}
init_facet_vars () {
+ [ "$CLIENTONLY" ] && return 0
local facet=$1
shift
local device=$1
if [ -z "${!varname}" ]; then
eval $varname=$(facet_host $facet)
fi
+
+ # ${facet}failover_dev is set in cfg file
+ varname=${facet}failover_dev
+ if [ -n "${!varname}" ] ; then
+ eval export ${facet}failover_dev=${!varname}
+ else
+ eval export ${facet}failover_dev=$device
+ fi
}
init_facets_vars () {
done
}
+mds_sanity_check () {
+ local timeout=$1
+ local period=0
+
+ while [ $period -lt $timeout ]; do
+ count=$(do_facet $SINGLEMDS "lctl dl | grep 'osc.*mdtlov_UUID' | grep ' IN ' 2>/dev/null | wc -l")
+ if [ $count -eq 0 ]; then
+ break
+ fi
+
+ echo "There are $count OST are inactive, wait $period seconds, and try again"
+ sleep 3
+ period=$((period+3))
+ done
+
+ [ $period -lt $timeout ] || log "$count OST are inactive after $timeout seconds, give up"
+}
+
+som_check() {
+ SOM_ENABLED=$(do_facet $SINGLEMDS "$LCTL get_param mdt.*.som" | awk -F= ' {print $2}' | head -n 1)
+ echo $SOM_ENABLED
+}
+
init_param_vars () {
if ! remote_ost_nodsh && ! remote_mds_nodsh; then
export MDSVER=$(do_facet $SINGLEMDS "lctl get_param version" | cut -d. -f1,2)
log "Using TIMEOUT=$TIMEOUT"
+ mds_sanity_check $TIMEOUT
+
+ if [ x"$(som_check)" = x"enabled" ]; then
+ ENABLE_QUOTA=""
+ fi
if [ "$ENABLE_QUOTA" ]; then
setup_quota $MOUNT || return 2
fi
check_config () {
local mntpt=$1
+
+ local mounted=$(mount | grep " $mntpt ")
+ if [ "$CLIENTONLY" ]; then
+ # bug 18021
+ # CLIENTONLY should not depend on *_HOST settings
+ local mgc=$($LCTL device_list | awk '/MGC/ {print $4}')
+ # in theory someone could create a new,
+ # client-only config file that assumed lustre was already
+ # configured and didn't set the MGSNID. If MGSNID is not set,
+ # then we should use the mgs nid currently being used
+ # as the default value. bug 18021
+ [[ x$MGSNID = x ]] &&
+ MGSNID=${mgc//MGC/}
+
+ if [[ x$mgc != xMGC$MGSNID ]]; then
+ if [ "$mgs_HOST" ]; then
+ local mgc_ip=$(ping -q -c1 -w1 $mgs_HOST | grep PING | awk '{print $3}' | sed -e "s/(//g" -e "s/)//g")
+ [[ x$mgc = xMGC$mgc_ip@$NETTYPE ]] ||
+ error_exit "MGSNID=$MGSNID, mounted: $mounted, MGC : $mgc"
+ fi
+ fi
+ return 0
+ fi
+
local myMGS_host=$mgs_HOST
if [ "$NETTYPE" = "ptl" ]; then
myMGS_host=$(h2ptl $mgs_HOST | sed -e s/@ptl//)
mgshost=$(echo $mgshost | awk -F: '{print $1}')
if [ "$mgshost" != "$myMGS_host" ]; then
- FAIL_ON_ERROR=true \
- error "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
+ error_exit "Bad config file: lustre is mounted with mgs $mgshost, but mgs_HOST=$mgs_HOST, NETTYPE=$NETTYPE
Please use correct config or set mds_HOST correctly!"
fi
##################################
# Adaptive Timeouts funcs
-at_is_valid() {
- if [ -z "$AT_MAX_PATH" ]; then
- AT_MAX_PATH=$(do_facet $SINGLEMDS "find /sys/ -name at_max")
- [ -z "$AT_MAX_PATH" ] && echo "missing /sys/.../at_max " && return 1
- fi
- return 0
-}
-
at_is_enabled() {
- at_is_valid || error "invalid call"
-
# only check mds, we assume at_max is the same on all nodes
- local at_max=$(do_facet $SINGLEMDS "cat $AT_MAX_PATH")
+ local at_max=$(do_facet $SINGLEMDS "lctl get_param -n at_max")
if [ $at_max -eq 0 ]; then
return 1
else
at_max_get() {
local facet=$1
- at_is_valid || error "invalid call"
-
# suppose that all ost-s has the same at_max set
if [ $facet == "ost" ]; then
- do_facet ost1 "cat $AT_MAX_PATH"
+ do_facet ost1 "lctl get_param -n at_max"
else
- do_facet $facet "cat $AT_MAX_PATH"
+ do_facet $facet "lctl get_param -n at_max"
fi
}
local at_max=$1
shift
- at_is_valid || error "invalid call"
-
local facet
for facet in $@; do
if [ $facet == "ost" ]; then
for i in `seq $OSTCOUNT`; do
- do_facet ost$i "echo $at_max > $AT_MAX_PATH"
+ do_facet ost$i "lctl set_param at_max=$at_max"
+
done
elif [ $facet == "mds" ]; then
for i in `seq $MDSCOUNT`; do
- do_facet mds$i "echo $at_max > $AT_MAX_PATH"
+ do_facet mds$i "lctl set_param at_max=$at_max"
done
else
- do_facet $facet "echo $at_max > $AT_MAX_PATH"
+ do_facet $facet "lctl set_param at_max=$at_max"
fi
done
}
}
set_nodes_failloc () {
- local nodes=$1
- local node
-
- for node in $nodes ; do
- do_node $node lctl set_param fail_loc=$2
- done
+ do_nodes $(comma_list $1) lctl set_param fail_loc=$2
}
cancel_lru_locks() {
ERRLOG=$TMP/lustre_${TESTSUITE}_${TESTNAME}.$(date +%s)
echo "Dumping lctl log to $ERRLOG"
# We need to dump the logs on all nodes
- local NODES=$(nodes_list)
- for NODE in $NODES; do
- do_node $NODE $LCTL dk $ERRLOG
- done
+ do_nodes $(comma_list $(nodes_list)) $NODE $LCTL dk $ERRLOG
debugrestore
[ "$TESTSUITELOG" ] && echo "$0: ${TYPE}: $TESTNAME $@" >> $TESTSUITELOG
TEST_FAILED=true
}
skip () {
- log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
- [ "$TESTSUITELOG" ] && \
- echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
+ echo
+ log " SKIP: ${TESTSUITE} ${TESTNAME} $@"
+ [ "$TESTSUITELOG" ] && \
+ echo "${TESTSUITE}: SKIP: $TESTNAME $@" >> $TESTSUITELOG || true
}
build_test_filter() {
MSG=${MSG//\>/\\\>}
MSG=${MSG//\</\\\<}
MSG=${MSG//\//\\\/}
- local NODES=$(nodes_list)
- for NODE in $NODES; do
- do_node $NODE $LCTL mark "$MSG" 2> /dev/null || true
- done
+ do_nodes $(comma_list $(nodes_list)) $LCTL mark "$MSG" 2> /dev/null || true
}
trace() {
}
reset_fail_loc () {
- local myNODES=$(nodes_list)
- local NODE
-
- for NODE in $myNODES; do
- do_node $NODE "lctl set_param fail_loc=0 2>/dev/null || true"
- done
+ echo -n "Resetting fail_loc on all nodes..."
+ do_nodes $(comma_list $(nodes_list)) "lctl set_param -n fail_loc=0 2>/dev/null || true"
+ echo done.
}
run_one() {
umask 0022
local BEFORE=`date +%s`
+ echo
log "== test $testnum: $message == `date +%H:%M:%S` ($BEFORE)"
#check_mds
export TESTNAME=test_$testnum
remote_mds_nodsh()
{
+ [ "$CLIENTONLY" ] && return 0 || true
remote_mds && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$mds_HOST" ]
}
remote_ost_nodsh()
{
+ [ "$CLIENTONLY" ] && return 0 || true
remote_ost && [ "$PDSH" = "no_dsh" -o -z "$PDSH" -o -z "$ost_HOST" ]
}
return 0
}
+do_and_time () {
+ local cmd=$1
+ local rc
+
+ SECONDS=0
+ eval '$cmd'
+
+ [ ${PIPESTATUS[0]} -eq 0 ] || rc=1
+
+ echo $SECONDS
+ return $rc
+}
+
inodes_available () {
local IFree=$($LFS df -i $MOUNT | grep ^$FSNAME | awk '{print $4}' | sort -un | head -1) || return 1
echo $IFree
done
}
-check_catastrophe () {
+check_catastrophe() {
local rnodes=${1:-$(comma_list $(remote_nodes_list))}
+ local C=$CATASTROPHE
+ [ -f $C ] && [ $(cat $C) -ne 0 ] && return 1
- [ -f $CATASTROPHE ] && [ $(cat $CATASTROPHE) -ne 0 ] && return 1
if [ $rnodes ]; then
- do_nodes $rnodes "set -x; [ -f $CATASTROPHE ] && { [ \`cat $CATASTROPHE\` -eq 0 ] || false; } || true"
+ do_nodes $rnodes "rc=\\\$([ -f $C ] && echo \\\$(< $C) || echo 0);
+if [ \\\$rc -ne 0 ]; then echo \\\$(hostname): \\\$rc; fi
+exit \\\$rc;"
fi
}
local file=$dir/f0.get_mds_dir_tmpfile
rm -f $file
+ sleep 1
local iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
- local oldused=($iused)
+ local -a oldused=($iused)
touch $file
sleep 1
iused=$(lfs df -i $dir | grep MDT | awk '{print $3}')
- local newused=($iused)
+ local -a newused=($iused)
local num=0
for ((i=0; i<${#newused[@]}; i++)); do
error "mdt-s : inodes count OLD ${oldused[@]} NEW ${newused[@]}"
}
-mpi_run () {
- local mpirun="$MPIRUN $MPIRUN_OPTIONS"
- local command="$mpirun $@"
- local mpilog=$TMP/mpi.log
- local rc
-
- if [ "$MPI_USER" != root -a $mpirun ]; then
- echo "+ chmod 0777 $MOUNT"
- chmod 0777 $MOUNT
- command="su $MPI_USER sh -c \"$command \""
- fi
-
- ls -ald $MOUNT
- echo "+ $command"
- eval $command 2>&1 > $mpilog || true
-
- rc=${PIPESTATUS[0]}
- if [ $rc -eq 0 ] && grep -q "p4_error: : [^0]" $mpilog ; then
- rc=1
- fi
- cat $mpilog
- return $rc
-}
-
mdsrate_cleanup () {
mpi_run -np $1 -machinefile $2 ${MDSRATE} --unlink --nfiles $3 --dir $4 --filefmt $5 $6
}
do_facet $SINGLEMDS lctl get_param -n mdd.${!var}.stale_export_age > /dev/null 2>&1
}
+########################
+convert_facet2name() {
+ case "$1" in
+ "ost" ) echo "OST0000" ;;
+ "ost1") echo "OST0000" ;;
+ "ost2") echo "OST0001" ;;
+ "ost3") echo "OST0002" ;;
+ "ost4") echo "OST0003" ;;
+ "ost5") echo "OST0004" ;;
+ *) error "unknown facet!" ;;
+ esac
+}
+
+get_clientosc_proc_path() {
+ local ost=$1
+
+ echo "{$1}-osc-*"
+}
+
+get_lustre_version () {
+ local node=${1:-"mds"}
+ do_facet $node $LCTL get_param -n version | awk '/^lustre:/ {print $2}'
+}
+
+get_mds_version_major () {
+ local version=$(get_lustre_version mds)
+ echo $version | awk -F. '{print $1}'
+}
+
+get_mds_version_minor () {
+ local version=$(get_lustre_version mds)
+ echo $version | awk -F. '{print $2}'
+}
+
+get_mdtosc_proc_path() {
+ local ost=$1
+ local major=$(get_mds_version_major)
+ local minor=$(get_mds_version_minor)
+ if [ $major -le 1 -a $minor -le 8 ] ; then
+ echo "${ost}-osc"
+ else
+ echo "${ost}-osc-MDT0000"
+ fi
+}
+
+get_osc_import_name() {
+ local node=$1
+ local ost=$2
+ local name=$(convert_facet2name $ost)
+
+ if [ "$node" == "mds" ]; then
+ get_mdtosc_proc_path $name
+ return 0
+ fi
+
+ get_clientosc_proc_path $name
+ return 0
+}
+
+wait_osc_import_state() {
+ local node=$1
+ local ost_facet=$2
+ local expected=$3
+ local ost=$(get_osc_import_name $node $ost_facet)
+ local CONN_PROC
+ local CONN_STATE
+ local i=0
+
+ CONN_PROC="osc.${FSNAME}-${ost}.ost_server_uuid"
+ CONN_STATE=$(do_facet $node lctl get_param -n $CONN_PROC 2>/dev/null | cut -f2)
+ while [ "${CONN_STATE}" != "${expected}" ]; do
+ # for disconn we can check after proc entry is removed
+ [ "x${CONN_STATE}" == "x" -a "${expected}" == "DISCONN" ] && return 0
+ # disconnect rpc should be wait not more obd_timeout
+ [ $i -ge $(($TIMEOUT * 3 / 2)) ] && \
+ error "can't put import for ${ost}(${ost_facet}) into ${expected} state" && return 1
+ sleep 1
+ CONN_STATE=$(do_facet $node lctl get_param -n $CONN_PROC 2>/dev/null | cut -f2)
+ i=$(($i + 1))
+ done
+
+ log "${ost_facet} now in ${CONN_STATE} state"
+ return 0
+}
git://git.whamcloud.com / fs / lustre-release.git / blobdiff