run_test 17n "run e2fsck against master/slave MDT which contains remote dir"
test_17o() {
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.64) ]] &&
+ skip "Need MDS version at least 2.3.64" && return
+
local WDIR=$DIR/${tdir}o
local mdt_index
local mdtdevname
$GETSTRIPE -c $DIR/d27/f01
[ $($GETSTRIPE -c $DIR/d27/f01) -eq 2 ] ||
error "two-stripe file doesn't have two stripes"
-}
-run_test 27b "create two stripe file"
-
-test_27c() {
- [ -f $DIR/d27/f01 ] || skip "test_27b not run" && return
dd if=/dev/zero of=$DIR/d27/f01 bs=4k count=4 || error "dd failed"
}
-run_test 27c "write to two stripe file"
+run_test 27b "create and write to two stripe file"
test_27d() {
test_mkdir -p $DIR/d27
set_checksums 0
rm -f $DIR/$tfile
}
-run_test 77a "normal checksum read/write operation ============="
+run_test 77a "normal checksum read/write operation"
test_77b() { # bug 10889
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
[ ! -f $F77_TMP ] && setup_f77
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- lctl set_param fail_loc=0x80000409
+ $LCTL set_param fail_loc=0x80000409
set_checksums 1
- dd if=$F77_TMP of=$DIR/f77b bs=1M count=$F77SZ conv=sync || \
+
+ dd if=$F77_TMP of=$DIR/$tfile bs=1M count=$F77SZ conv=sync ||
error "dd error: $?"
- lctl set_param fail_loc=0
- set_checksums 0
-}
-run_test 77b "checksum error on client write ===================="
+ $LCTL set_param fail_loc=0
-test_77c() { # bug 10889
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- $GSS && skip "could not run with gss" && return
- [ ! -f $DIR/f77b ] && skip "requires 77b - skipping" && return
- set_checksums 1
for algo in $CKSUM_TYPES; do
cancel_lru_locks osc
set_checksum_type $algo
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
- lctl set_param fail_loc=0x80000408
- cmp $F77_TMP $DIR/f77b || error "file compare failed"
- lctl set_param fail_loc=0
+ $LCTL set_param fail_loc=0x80000408
+ cmp $F77_TMP $DIR/$tfile || error "file compare failed"
+ $LCTL set_param fail_loc=0
done
set_checksums 0
set_checksum_type $ORIG_CSUM_TYPE
- rm -f $DIR/f77b
+ rm -f $DIR/$tfile
}
-run_test 77c "checksum error on client read ==================="
+run_test 77b "checksum error on client write, read"
test_77d() { # bug 10889
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
$GSS && skip "could not run with gss" && return
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- lctl set_param fail_loc=0x80000409
+ $LCTL set_param fail_loc=0x80000409
set_checksums 1
- directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
+ $DIRECTIO write $DIR/$tfile 0 $F77SZ $((1024 * 1024)) ||
error "direct write: rc=$?"
- lctl set_param fail_loc=0
+ $LCTL set_param fail_loc=0
set_checksums 0
-}
-run_test 77d "checksum error on OST direct write ==============="
-test_77e() { # bug 10889
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- $GSS && skip "could not run with gss" && return
- [ ! -f $DIR/f77 ] && skip "requires 77d - skipping" && return
#define OBD_FAIL_OSC_CHECKSUM_RECEIVE 0x408
- lctl set_param fail_loc=0x80000408
+ $LCTL set_param fail_loc=0x80000408
set_checksums 1
cancel_lru_locks osc
- directio read $DIR/f77 0 $F77SZ $((1024 * 1024)) || \
+ $DIRECTIO read $DIR/$tfile 0 $F77SZ $((1024 * 1024)) ||
error "direct read: rc=$?"
- lctl set_param fail_loc=0
+ $LCTL set_param fail_loc=0
set_checksums 0
}
-run_test 77e "checksum error on OST direct read ================"
+run_test 77d "checksum error on OST direct write, read"
test_77f() { # bug 10889
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
cancel_lru_locks osc
set_checksum_type $algo
#define OBD_FAIL_OSC_CHECKSUM_SEND 0x409
- lctl set_param fail_loc=0x409
- directio write $DIR/f77 0 $F77SZ $((1024 * 1024)) && \
+ $LCTL set_param fail_loc=0x409
+ $DIRECTIO write $DIR/$tfile 0 $F77SZ $((1024 * 1024)) &&
error "direct write succeeded"
- lctl set_param fail_loc=0
+ $LCTL set_param fail_loc=0
done
set_checksum_type $ORIG_CSUM_TYPE
set_checksums 0
}
-run_test 77f "repeat checksum error on write (expect error) ===="
+run_test 77f "repeat checksum error on write (expect error)"
test_77g() { # bug 10889
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ ! -f $F77_TMP ] && setup_f77
- $SETSTRIPE -c 1 -i 0 $DIR/f77g
+ $SETSTRIPE -c 1 -i 0 $DIR/$tfile
#define OBD_FAIL_OST_CHECKSUM_RECEIVE 0x21a
do_facet ost1 lctl set_param fail_loc=0x8000021a
set_checksums 1
- dd if=$F77_TMP of=$DIR/f77g bs=1M count=$F77SZ || \
+ dd if=$F77_TMP of=$DIR/$tfile bs=1M count=$F77SZ ||
error "write error: rc=$?"
do_facet ost1 lctl set_param fail_loc=0
set_checksums 0
-}
-run_test 77g "checksum error on OST write ======================"
-
-test_77h() { # bug 10889
- [ $PARALLEL == "yes" ] && skip "skip parallel run" && return
- $GSS && skip "could not run with gss" && return
- remote_ost_nodsh && skip "remote OST with nodsh" && return
- [ ! -f $DIR/f77g ] && skip "requires 77g - skipping" && return
cancel_lru_locks osc
#define OBD_FAIL_OST_CHECKSUM_SEND 0x21b
do_facet ost1 lctl set_param fail_loc=0x8000021b
set_checksums 1
- cmp $F77_TMP $DIR/f77g || error "file compare failed"
+ cmp $F77_TMP $DIR/$tfile || error "file compare failed"
do_facet ost1 lctl set_param fail_loc=0
set_checksums 0
}
-run_test 77h "checksum error on OST read ======================="
+run_test 77g "checksum error on OST write, read"
test_77i() { # bug 13805
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
done
remount_client $MOUNT
}
-run_test 77i "client not supporting OSD_CONNECT_CKSUM =========="
+run_test 77i "client not supporting OSD_CONNECT_CKSUM"
test_77j() { # bug 13805
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
done
remount_client $MOUNT
}
-run_test 77j "client only supporting ADLER32 ===================="
+run_test 77j "client only supporting ADLER32"
[ "$ORIG_CSUM" ] && set_checksums $ORIG_CSUM || true
rm -f $F77_TMP
fi
}
+changelog_extract_field() {
+ local mdt=$1
+ local cltype=$2
+ local file=$3
+ local identifier=$4
+
+ $LFS changelog $mdt | gawk "/$cltype.*$file$/ {
+ print gensub(/^.* "$identifier'(\[[^\]]*\]).*$/,"\\1",1)}' |
+ tail -1
+}
+
test_160() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
remote_mds_nodsh && skip "remote MDS with nodsh" && return
# verify contents
echo "verifying target fid"
- fidc=$($LFS changelog $MDT0|awk '/CREAT.*timestamp$/{print $6}'|tail -1)
+ fidc=$(changelog_extract_field $MDT0 "CREAT" "timestamp" "t=")
fidf=$($LFS path2fid $DIR/$tdir/pics/zach/timestamp)
- [ "$fidc" == "t=$fidf" ] ||
+ [ "$fidc" == "$fidf" ] ||
err17935 "fid in changelog $fidc != file fid $fidf"
echo "verifying parent fid"
- fidc=$($LFS changelog $MDT0|awk '/CREAT.*timestamp$/{print $7}'|tail -1)
+ fidc=$(changelog_extract_field $MDT0 "CREAT" "timestamp" "p=")
fidf=$($LFS path2fid $DIR/$tdir/pics/zach)
- [ "$fidc" == "p=$fidf" ] ||
+ [ "$fidc" == "$fidf" ] ||
err17935 "pfid in changelog $fidc != dir fid $fidf"
USER_REC1=$($GET_CL_USERS | awk "\$1 == \"$USER\" {print \$2}")
run_test 182 "Disable MDC RPCs semaphore wouldn't crash client ================"
test_183() { # LU-2275
+ [[ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.3.56) ]] &&
+ skip "Need MDS version at least 2.3.56" && return
+
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
mkdir -p $DIR/$tdir || error "creating dir $DIR/$tdir"
echo aaa > $DIR/$tdir/$tfile
# /proc/sys/lnet/routes should look like this:
# Routing disabled/enabled
- # net hops state router
- # where net is a string like tcp0, hops >= 0, state is up/down,
+ # net hops priority state router
+ # where net is a string like tcp0, hops > 0, priority >= 0,
+ # state is up/down,
# router is a string like 192.168.1.1@tcp2
L1="^Routing (disabled|enabled)$"
- L2="^net +hops +state +router$"
- BR="^$NET +$N +(up|down) +$NID$"
+ L2="^net +hops +priority +state +router$"
+ BR="^$NET +$N +(0|1) +(up|down) +$NID$"
create_lnet_proc_files "routes"
check_lnet_proc_entry "routes.out" "/proc/sys/lnet/routes" "$BR" "$L1" "$L2"
check_lnet_proc_entry "routes.sys" "lnet.routes" "$BR" "$L1" "$L2"
}
run_test 233 "checking that OBF of the FS root succeeds"
+test_234() {
+ local p="$TMP/sanityN-$TESTNAME.parameters"
+ save_lustre_params client "llite.*.xattr_cache" > $p
+ lctl set_param llite.*.xattr_cache 1 ||
+ { skip "xattr cache is not supported"; return 0; }
+
+ mkdir -p $DIR/$tdir || error "mkdir failed"
+ touch $DIR/$tdir/$tfile || error "touch failed"
+ # OBD_FAIL_LLITE_XATTR_ENOMEM
+ $LCTL set_param fail_loc=0x1405
+ setfattr -n user.attr -v value $DIR/$tdir/$tfile &&
+ error "setfattr should have failed with ENOMEM"
+ # attr pre-2.4.44-7 had a bug with rc
+ getfattr -n user.attr $DIR/$tdir/$tfile &&
+ error "getfattr should have failed with ENOMEM"
+ $LCTL set_param fail_loc=0x0
+ rm -rf $DIR/$tdir
+
+ restore_lustre_params < $p
+ rm -f $p
+}
+run_test 234 "xattr cache should not crash on ENOMEM"
+
#
# tests that do cleanup/setup should be run at the end
#
git://git.whamcloud.com / fs / lustre-release.git / blobdiff