test_24d() {
test_mkdir $DIR/$tdir
test_mkdir $DIR/$tdir/d$testnum.1
- test_mkdir $DIR/$tdir/d$ttestnum.2
+ test_mkdir $DIR/$tdir/d$testnum.2
mrename $DIR/$tdir/d$testnum.1 $DIR/$tdir/d$testnum.2
$CHECKSTAT -a $DIR/$tdir/d$testnum.1 || error "d$testnum.1 exists"
$CHECKSTAT -t dir $DIR/$tdir/d$testnum.2 || error "d$testnum.2 not dir"
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
trap simple_cleanup_common EXIT
+ # Performance issue on ZFS see LU-4072 (c.f. LU-2887)
+ [ $(facet_fstype $SINGLEMDS) = "zfs" ] && NRFILES=10000
+
mkdir -p $DIR/$tdir
createmany -m $DIR/$tdir/$tfile $NRFILES
test_24A() { # LU-3182
local NFILES=5000
+ rm -rf $DIR/$tdir
mkdir -p $DIR/$tdir
createmany -m $DIR/$tdir/$tfile $NFILES
local t=`ls $DIR/$tdir | wc -l`
[ ! -d $DIR/d27 ] && test_mkdir -p $DIR d27
$SETSTRIPE -S 67108864 $FILE || error "setstripe failed"
BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
- [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "$BLKSIZE > $LL_MAX_BLKSIZE"
+ [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "1:$BLKSIZE > $LL_MAX_BLKSIZE"
dd if=/dev/zero of=$FILE bs=4k count=1
BLKSIZE=`stat $FILE | awk '/IO Block:/ { print $7 }'`
- [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "$BLKSIZE > $LL_MAX_BLKSIZE"
+ [ $BLKSIZE -le $LL_MAX_BLKSIZE ] || error "2:$BLKSIZE > $LL_MAX_BLKSIZE"
}
run_test 27k "limit i_blksize for broken user apps ============="
local dev=$(ostdevname $ost)
local oid_hex
- if [ $(facet_fstype ost$ost) != ldiskfs ]; then
- echo "Currently only works with ldiskfs-based OSTs"
- continue
- fi
-
- log "want: stripe:$stripe_nr ost:$obdidx oid:$oid/$hex seq:$seq"
-
- #don't unmount/remount the OSTs if we don't need to do that
- # LU-2577 changes filter_fid to be smaller, so debugfs needs
- # update too, until that use mount/ll_decode_filter_fid/mount
- local dir=$(facet_mntpt ost$ost)
- local opts=${OST_MOUNT_OPTS}
-
- if ! do_facet ost$ost test -b ${dev}; then
- opts=$(csa_add "$opts" -o loop)
- fi
-
- stop ost$ost
- do_facet ost$ost mount -t $(facet_fstype ost$ost) $opts $dev $dir ||
- { error "mounting $dev as $FSTYPE failed"; return 3; }
+ log "want: stripe:$stripe_nr ost:$obdidx oid:$oid/$hex seq:$seq"
seq=$(echo $seq | sed -e "s/^0x//g")
if [ $seq == 0 ]; then
else
oid_hex=$(echo $hex | sed -e "s/^0x//g")
fi
- local obj_file=$(do_facet ost$ost find $dir/O/$seq -name $oid_hex)
- local ff=$(do_facet ost$ost $LL_DECODE_FILTER_FID $obj_file)
- do_facet ost$ost umount -d $dir
- start ost$ost $dev $OST_MOUNT_OPTS
+ local obj_file="O/$seq/d$((oid %32))/$oid_hex"
- # re-enable when debugfs will understand new filter_fid
- #local ff=$(do_facet ost$ost "$DEBUGFS -c -R 'stat $obj_file' \
- # $dev 2>/dev/null" | grep "parent=")
+ local ff
+ #
+ # Don't unmount/remount the OSTs if we don't need to do that.
+ # LU-2577 changes filter_fid to be smaller, so debugfs needs
+ # update too, until that use mount/ll_decode_filter_fid/mount.
+ # Re-enable when debugfs will understand new filter_fid.
+ #
+ if false && [ $(facet_fstype ost$ost) == ldiskfs ]; then
+ ff=$(do_facet ost$ost "$DEBUGFS -c -R 'stat $obj_file' \
+ $dev 2>/dev/null" | grep "parent=")
+ else
+ stop ost$ost
+ mount_fstype ost$ost
+ ff=$(do_facet ost$ost $LL_DECODE_FILTER_FID \
+ $(facet_mntpt ost$ost)/$obj_file)
+ unmount_fstype ost$ost
+ start ost$ost $dev $OST_MOUNT_OPTS
+ fi
- [ -z "$ff" ] && error "$obj_file: no filter_fid info"
+ [ -z "$ff" ] && error "$obj_file: no filter_fid info"
- echo "$ff" | sed -e 's#.*objid=#got: objid=#'
+ echo "$ff" | sed -e 's#.*objid=#got: objid=#'
- # /mnt/O/0/d23/23: objid=23 seq=0 parent=[0x200000400:0x1e:0x1]
- # fid: objid=23 seq=0 parent=[0x200000400:0x1e:0x0] stripe=1
- local ff_parent=$(echo $ff|sed -e 's/.*parent=.//')
- local ff_pseq=$(echo $ff_parent | cut -d: -f1)
- local ff_poid=$(echo $ff_parent | cut -d: -f2)
- local ff_pstripe=$(echo $ff_parent | sed -e 's/.*stripe=//')
+ # /mnt/O/0/d23/23: objid=23 seq=0 parent=[0x200000400:0x1e:0x1]
+ # fid: objid=23 seq=0 parent=[0x200000400:0x1e:0x0] stripe=1
+ local ff_parent=$(echo $ff|sed -e 's/.*parent=.//')
+ local ff_pseq=$(echo $ff_parent | cut -d: -f1)
+ local ff_poid=$(echo $ff_parent | cut -d: -f2)
+ local ff_pstripe
+ if echo $ff_parent | grep -q 'stripe='; then
+ ff_pstripe=$(echo $ff_parent | sed -e 's/.*stripe=//')
+ else
+ #
+ # $LL_DECODE_FILTER_FID does not print "stripe="; look
+ # into f_ver in this case. See the comment on
+ # ff_parent.
+ #
+ ff_pstripe=$(echo $ff_parent | cut -d: -f3 |
+ sed -e 's/\]//')
+ fi
# compare lmm_seq and filter_fid->ff_parent.f_seq
[ $ff_pseq = $lmm_seq ] ||
# compare lmm_object_id and filter_fid->ff_parent.f_oid
[ $ff_poid = $lmm_oid ] ||
error "FF parent OID $ff_poid != $lmm_oid"
- [ $ff_pstripe = $stripe_nr ] ||
+ (($ff_pstripe == $stripe_nr)) ||
error "FF stripe $ff_pstripe != $stripe_nr"
stripe_nr=$((stripe_nr + 1))
local restore_count=$($GETSTRIPE -c $MOUNT)
local restore_offset=$($GETSTRIPE -i $MOUNT)
$SETSTRIPE -c 0 -i -1 -S 0 $MOUNT
+ wait_update $HOSTNAME "$GETSTRIPE -c $MOUNT | sed 's/ *//g'" "1" 20 ||
+ error "stripe count $($GETSTRIPE -c $MOUNT) != 1"
local default_size=$($GETSTRIPE -S $MOUNT)
- local default_count=$($GETSTRIPE -c $MOUNT)
local default_offset=$($GETSTRIPE -i $MOUNT)
local dsize=$((1024 * 1024))
[ $default_size -eq $dsize ] ||
error "stripe size $default_size != $dsize"
- [ $default_count -eq 1 ] || error "stripe count $default_count != 1"
[ $default_offset -eq -1 ] ||error "stripe offset $default_offset != -1"
$SETSTRIPE -c $restore_count -i $restore_offset -S $restore_size $MOUNT
}
run_test 31m "link to file: the same, non-existing, dir==============="
test_31n() {
- [ -e /proc/self/fd/173 ] && echo "skipping, fd 173 is in use" && return
touch $DIR/$tfile || error "cannot create '$DIR/$tfile'"
nlink=$(stat --format=%h $DIR/$tfile)
[ ${nlink:--1} -eq 1 ] || error "nlink is $nlink, expected 1"
- exec 173<$DIR/$tfile
- trap "exec 173<&-" EXIT
- nlink=$(stat --dereference --format=%h /proc/self/fd/173)
+ local fd=$(free_fd)
+ local cmd="exec $fd<$DIR/$tfile"
+ eval $cmd
+ cmd="exec $fd<&-"
+ trap "eval $cmd" EXIT
+ nlink=$(stat --dereference --format=%h /proc/self/fd/$fd)
[ ${nlink:--1} -eq 1 ] || error "nlink is $nlink, expected 1"
rm $DIR/$tfile || error "cannot remove '$DIR/$tfile'"
- nlink=$(stat --dereference --format=%h /proc/self/fd/173)
+ nlink=$(stat --dereference --format=%h /proc/self/fd/$fd)
[ ${nlink:--1} -eq 0 ] || error "nlink is $nlink, expected 0"
- exec 173<&-
+ eval $cmd
}
run_test 31n "check link count of unlinked file"
cleanup_test32_mount() {
trap 0
- $UMOUNT $DIR/$tdir/ext2-mountpoint
+ $UMOUNT -d $DIR/$tdir/ext2-mountpoint
}
test_32a() {
cleanup_testdir_mount() {
trap 0
- $UMOUNT $DIR/$tdir
+ $UMOUNT -d $DIR/$tdir
}
test_32q() {
test_39o() {
TESTDIR=$DIR/$tdir/$tfile
[ -e $TESTDIR ] && rm -rf $TESTDIR
- mkdir -p $TESTDIR
+ test_mkdir -p $TESTDIR
cd $TESTDIR
links1=2
ls
}
run_test 39o "directory cached attributes updated after create ========"
+test_39p() {
+ [ $MDSCOUNT -lt 2 ] && skip "needs >= 2 MDTs" && return
+ local MDTIDX=1
+ TESTDIR=$DIR/$tdir/$tfile
+ [ -e $TESTDIR ] && rm -rf $TESTDIR
+ mkdir -p $TESTDIR
+ cd $TESTDIR
+ links1=2
+ ls
+ $LFS mkdir -i $MDTIDX $TESTDIR/remote_dir1
+ $LFS mkdir -i $MDTIDX $TESTDIR/remote_dir2
+ ls
+ links2=$(stat -c %h .)
+ [ $(($links1 + 2)) != $links2 ] &&
+ error "wrong links count $(($links1 + 2)) != $links2"
+ rmdir remote_dir2
+ links3=$(stat -c %h .)
+ [ $(($links1 + 1)) != $links3 ] &&
+ error "wrong links count $links1 != $links3"
+ return 0
+}
+run_test 39p "remote directory cached attributes updated after create ========"
+
+
test_40() {
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1
$RUNAS $OPENFILE -f O_WRONLY:O_TRUNC $DIR/$tfile &&
dd if=/dev/zero of=$tdir/tmp bs=`page_size` count=30 || error "dd write"
df $tdir
dd if=$tdir/tmp of=/dev/zero bs=`page_size` count=30 || error "dd read"
- $UMOUNT $tdir
+ $UMOUNT -d $tdir
losetup -d $loopdev
rm $loopdev
}
run_test 56x "lfs migration support"
test_56y() {
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.53) ] &&
+ skip "No HSM support on MDS of $(get_lustre_version)," \
+ "need 2.4.53 at least" && return
local res=""
local dir0=$DIR/$tdir/$testnum
local MDSFREE2=$(do_facet $mymds \
lctl get_param -n osd*.*MDT000$((num -1)).kbytesfree)
local MDCFREE2=$(lctl get_param -n mdc.*MDT000$((num -1))-mdc-*.kbytesfree)
- if [ "$MDCFREE2" -lt "$((MDCFREE - 8))" ]; then
+ if [ "$MDCFREE2" -lt "$((MDCFREE - 16))" ]; then
if [ "$MDSFREE" != "$MDSFREE2" ]; then
error "MDC before $MDCFREE != after $MDCFREE2"
else
test_101a() {
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
+ [ $MDSCOUNT -ge 2 ] && skip "skip now for >= 2 MDTs" && return #LU-4322
local s
local discard
local nreads=10000
cleanup_test102
+getxattr() { # getxattr path name
+ # Return the base64 encoding of the value of xattr name on path.
+ local path=$1
+ local name=$2
+
+ # # getfattr --absolute-names --encoding=base64 --name=trusted.lov $path
+ # file: $path
+ # trusted.lov=0s0AvRCwEAAAAGAAAAAAAAAAAEAAACAAAAAAAQAAEAA...AAAAAAAAA=
+ #
+ # We print just 0s0AvRCwEAAAAGAAAAAAAAAAAEAAACAAAAAAAQAAEAA...AAAAAAAAA=
+
+ getfattr --absolute-names --encoding=base64 --name=$name $path |
+ awk -F= -v name=$name '$1 == name {
+ print substr($0, index($0, "=") + 1);
+ }'
+}
+
+test_102n() { # LU-4101 mdt: protect internal xattrs
+ local file0=$DIR/$tfile.0
+ local file1=$DIR/$tfile.1
+ local xattr0=$TMP/$tfile.0
+ local xattr1=$TMP/$tfile.1
+ local name
+ local value
+
+ if [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.5.50) ]
+ then
+ skip "MDT < 2.5.50 allows setxattr on internal trusted xattrs"
+ return
+ fi
+
+ rm -rf $file0 $file1 $xattr0 $xattr1
+ touch $file0 $file1
+
+ # Get 'before' xattrs of $file1.
+ getfattr --absolute-names --dump --match=- $file1 > $xattr0
+
+ for name in lov lma lmv link fid version som hsm lfsck_namespace; do
+ # Try to copy xattr from $file0 to $file1.
+ value=$(getxattr $file0 trusted.$name 2> /dev/null)
+
+ setfattr --name=trusted.$name --value="$value" $file1 ||
+ error "setxattr 'trusted.$name' failed"
+
+ # Try to set a garbage xattr.
+ value=0sVGhlIHF1aWNrIGJyb3duIGZveCBqdW1wcyBvdmVyIGl0c2VsZi4=
+
+ setfattr --name=trusted.$name --value="$value" $file1 ||
+ error "setxattr 'trusted.$name' failed"
+
+ # Try to remove the xattr from $file1. We don't care if this
+ # appears to succeed or fail, we just don't want there to be
+ # any changes or crashes.
+ setfattr --remove=$trusted.$name $file1 2> /dev/null
+ done
+
+ # Get 'after' xattrs of file1.
+ getfattr --absolute-names --dump --match=- $file1 > $xattr1
+
+ if ! diff $xattr0 $xattr1; then
+ error "before and after xattrs of '$file1' differ"
+ fi
+
+ rm -rf $file0 $file1 $xattr0 $xattr1
+
+ return 0
+}
+run_test 102n "silently ignore setxattr on internal trusted xattrs"
+
run_acl_subtest()
{
$LUSTRE/tests/acl/run $LUSTRE/tests/acl/$1.test
echo "ok"
else
echo "failed - QOS mode won't be used"
- error_ignore 0000 "QOS imbalance criteria not met"
+ skip "QOS imbalance criteria not met"
simple_cleanup_common
return
fi
[ $MINC -gt 0 ] &&
echo "Wrote ${FILL}% more files to larger OST $MAXI1"
[ $MAXC -gt $MINC ] ||
- error_ignore 0000 "stripe QOS didn't balance free space"
-
+ error_ignore LU-9 "stripe QOS didn't balance free space"
simple_cleanup_common
}
run_test 116a "stripe QOS: free space balance ==================="
echo "Truncate succeeded."
rm -f $DIR/$tfile
}
-run_test 117 "verify fsfilt_extend =========="
+run_test 117 "verify osd extend =========="
NO_SLOW_RESENDCOUNT=4
export OLD_RESENDCOUNT=""
ENOSPC=28
EFBIG=27
+ rm -rf $DIR/$tdir
test_mkdir -p $DIR/$tdir
- MAX=$(stat -c%s "$DIR/$tdir")
+ # block size of mds1
+ local MDT_DEV=$(mdsdevname ${SINGLEMDS//mds/})
+ local MDSBLOCKSIZE=$($LCTL get_param -n mdc.*MDT0000*.blocksize)
+ local MAX=$((MDSBLOCKSIZE * 3))
set_dir_limits $MAX
- local I=0
+ local I=$(stat -c%s "$DIR/$tdir")
local J=0
while [ ! $I -gt $MAX ]; do
$MULTIOP $DIR/$tdir/$J Oc
#check two errors ENOSPC for new version of ext4 max_dir_size patch
#mainline kernel commit df981d03eeff7971ac7e6ff37000bfa702327ef1
#and EFBIG for previous versions
- if [ $rc -eq $EFBIG -o $rc -eq $ENOSPC ] && [ $I -gt 0 ]; then
+ if [ $rc -eq $EFBIG -o $rc -eq $ENOSPC ]; then
set_dir_limits 0
echo "return code $rc received as expected"
- multiop $DIR/$tdir/$J Oc
- rc=$?
+ multiop $DIR/$tdir/$J Oc ||
+ error_exit "multiop failed w/o dir size limit"
+
I=$(stat -c%s "$DIR/$tdir")
- if [ $I -gt $MAX ] && [ $rc -eq 0 ]; then
- return 0
+
+ if [ $(lustre_version_code $SINGLEMDS) -lt \
+ $(version_code 2.4.51) ]
+ then
+ [ $I -eq $MAX ] && return 0
else
- error_exit "return code $rc current dir size $I " \
- "previous limit $MAX"
+ [ $I -gt $MAX ] && return 0
fi
+ error_exit "current dir size $I, previous limit $MAX"
elif [ $rc -ne 0 ]; then
set_dir_limits 0
error_exit "return code $rc received instead of expected " \
BEFORE=`roc_hit`
cat $file >/dev/null
AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == 0"; then
- error_ignore 20762 "IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
-
+ if ! let "AFTER - BEFORE == 0"; then
+ error_ignore bz20762 "IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
log "Turn on the read cache and turn off the write cache"
set_cache read on
cancel_lru_locks osc
cat $file >/dev/null
AFTER=`roc_hit`
- if ! let "AFTER - BEFORE == 0"; then
- error_ignore 20762 "IN CACHE: before: $BEFORE, after: $AFTER"
- else
- log "cache hits:: before: $BEFORE, after: $AFTER"
- fi
+ if ! let "AFTER - BEFORE == 0"; then
+ error_ignore bz20762 "IN CACHE: before: $BEFORE, after: $AFTER"
+ else
+ log "cache hits:: before: $BEFORE, after: $AFTER"
+ fi
log "Read again; it should be satisfied from the cache."
BEFORE=`roc_hit`
#Changelogs
err17935 () {
if [ $MDSCOUNT -gt 1 ]; then
- error_ignore 17935 $*
+ error_ignore bz17935 $*
else
error $*
fi
local pages=${3:-64}
local rc=0
local id
+
+ local count=10
+ local obd_size=$(get_obd_size $node $OBD)
+ local page_size=$(get_page_size $node)
+ if [[ -n "$obd_size" ]]; then
+ local new_count=$((obd_size / (pages * page_size / 1024)))
+ [[ $new_count -ge $count ]] || count=$new_count
+ fi
+
do_facet $node "$LCTL attach echo_client ec ec_uuid" || rc=1
[ $rc -eq 0 ] && { do_facet $node "$LCTL --device ec setup $OBD" ||
rc=2; }
[ $rc -eq 0 ] && { do_facet $node "$LCTL --device ec getattr $id" ||
rc=4; }
[ $rc -eq 0 ] && { do_facet $node "$LCTL --device ec " \
- "test_brw 10 w v $pages $id" || rc=4; }
+ "test_brw $count w v $pages $id" || rc=4; }
[ $rc -eq 0 ] && { do_facet $node "$LCTL --device ec destroy $id 1" ||
rc=4; }
[ $rc -eq 0 -o $rc -gt 2 ] && { do_facet $node "$LCTL --device ec " \
}
run_test 208 "Exclusive open"
+test_209() {
+ [ -z "$(lctl get_param -n mdc.*.connect_flags | grep disp_stripe)" ] &&
+ skip_env "must have disp_stripe" && return
+
+ touch $DIR/$tfile
+ sync; sleep 5; sync;
+
+ echo 3 > /proc/sys/vm/drop_caches
+ req_before=$(awk '/ptlrpc_cache / { print $2 }' /proc/slabinfo)
+
+ # open/close 500 times
+ for i in $(seq 500); do
+ cat $DIR/$tfile
+ done
+
+ echo 3 > /proc/sys/vm/drop_caches
+ req_after=$(awk '/ptlrpc_cache / { print $2 }' /proc/slabinfo)
+
+ echo "before: $req_before, after: $req_after"
+ [ $((req_after - req_before)) -ge 300 ] &&
+ error "open/close requests are not freed"
+ return 0
+}
+run_test 209 "read-only open/close requests should be freed promptly"
+
test_212() {
size=`date +%s`
size=$((size % 8192 + 1))
dd if=/dev/zero of=$DIR/$tfile bs=4096 count=1 seek=3
$LCTL set_param fail_loc=0x411
dd if=/dev/zero of=$DIR/$tfile bs=1024 count=1 seek=2 conv=notrunc
+
+ # LU-4201
+ dd if=/dev/zero of=$DIR/$tfile-2 bs=1024 count=1
+ $CHECKSTAT -s 1024 $DIR/$tfile-2 || error "checkstat wrong size"
}
run_test 219 "LU-394: Write partial won't cause uncontiguous pages vec at LND"
run_test 228c "NOT shrink the last entry in OI index node to recycle idle leaf"
test_229() { # LU-2482, LU-3448
+ [ $(lustre_version_code $SINGLEMDS) -lt $(version_code 2.4.53) ] &&
+ skip "No HSM support on MDS of $(get_lustre_version)," \
+ "need 2.4.53 at least" && return
[ $PARALLEL == "yes" ] && skip "skip parallel run" && return
[ $OSTCOUNT -lt 2 ] && skip "needs >= 2 OSTs" && return
}
run_test 232 "failed lock should not block umount"
-test_233() {
+test_233a() {
[ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.3.64) ] ||
{ skip "Need MDS version at least 2.3.64"; return; }
stat $MOUNT/.lustre/fid/$fid > /dev/null ||
error "cannot access $MOUNT using its FID '$fid'"
}
-run_test 233 "checking that OBF of the FS root succeeds"
+run_test 233a "checking that OBF of the FS root succeeds"
+
+test_233b() {
+ [ $(lustre_version_code $SINGLEMDS) -ge $(version_code 2.5.90) ] ||
+ { skip "Need MDS version at least 2.5.90"; return; }
+
+ local fid=$($LFS path2fid $MOUNT/.lustre)
+ stat $MOUNT/.lustre/fid/$fid > /dev/null ||
+ error "cannot access $MOUNT/.lustre using its FID '$fid'"
+
+ fid=$($LFS path2fid $MOUNT/.lustre/fid)
+ stat $MOUNT/.lustre/fid/$fid > /dev/null ||
+ error "cannot access $MOUNT/.lustre/fid using its FID '$fid'"
+}
+run_test 233b "checking that OBF of the FS .lustre succeeds"
test_234() {
local p="$TMP/sanityN-$TESTNAME.parameters"
cp $ref1 $file1 || error "cp $ref1 $file1 failed: rc = $?"
$SETSTRIPE -c 2 $file2 || error "cannot setstripe on '$file2': rc = $?"
cp $ref2 $file2 || error "cp $ref2 $file2 failed: rc = $?"
- exec {FD}<>$file2
+ local fd=$(free_fd)
+ local cmd="exec $fd<>$file2"
+ eval $cmd
rm $file2
- $LFS swap_layouts $file1 /proc/self/fd/${FD} ||
- error "cannot swap layouts of '$file1' and /proc/self/fd/${FD}"
- exec {FD}>&-
+ $LFS swap_layouts $file1 /proc/self/fd/${fd} ||
+ error "cannot swap layouts of '$file1' and /proc/self/fd/${fd}"
+ cmd="exec $fd>&-"
+ eval $cmd
cmp $ref2 $file1 || error "content compare failed ($ref2 != $file1)"
#cleanup
git://git.whamcloud.com / fs / lustre-release.git / blobdiff