ALWAYS_EXCEPT="$SANITY_EXCEPT "
# bug number for skipped test: LU-9693 LU-6493 LU-9693
ALWAYS_EXCEPT+=" 42a 42b 42c "
-# bug number: LU-8411 LU-9054 LU-13314
-ALWAYS_EXCEPT+=" 407 312 56ob"
+# bug number: LU-8411 LU-9054
+ALWAYS_EXCEPT+=" 407 312"
if $SHARED_KEY; then
# bug number: LU-9795 LU-9795 LU-9795 LU-9795
skip "Does not support layout lock."
}
+check_swap_layout_no_dom()
+{
+ local FOLDER=$1
+ local SUPP=$(lfs getstripe $FOLDER | grep "pattern: mdt" | wc -l)
+ [ $SUPP -eq 0 ] || skip "layout swap does not support DOM files so far"
+}
+
check_and_setup_lustre
DIR=${DIR:-$MOUNT}
assert_DIR
done
local failed=0
- for i in {1..50}; do
+ for i in {1..250}; do
for fname in $(mktemp -u $DIR/$tdir/.$tfile.XXXXXX) \
$(mktemp $DIR/$tdir/$tfile.XXXXXXXX); do
touch $fname || error "touch $fname failed"
done
done
echo "$failed MDT index mismatches"
- (( failed < 4 )) || error "MDT index mismatch $failed times"
+ (( failed < 20 )) || error "MDT index mismatch $failed times"
}
run_test 33h "temp file is located on the same MDT as target"
cmd="$LFS find $dir -ctime +1s -type f"
nums=$($cmd | wc -l)
(( $nums == $count * 2 + 1)) ||
- error "'$cmd' wrong: found $nums, expected $((expected*2+1))"
+ error "'$cmd' wrong: found $nums, expected $((count * 2 + 1))"
}
run_test 56ob "check lfs find -atime -mtime -ctime with units"
test_mkdir -p $dir || error "failed to mkdir $dir"
$LFS setstripe -c 1 -i 0 $dir/$tfile ||
error "failed to setstripe $dir/$tfile"
+ mdt_idx=$($LFS getdirstripe -i $dir)
dd if=/dev/zero of=$dir/$tfile bs=1M count=1
stack_trap "rm -f $tmp" EXIT
- $LFS find --size +100K --ost 0 $dir 2>&1 | tee $tmp
- [ -z "$(cat $tmp | grep "obd_uuid: ")" ] ||
+ $LFS find --size +100K --ost 0 $dir |& tee $tmp
+ ! grep -q obd_uuid $tmp ||
error "failed to find --size +100K --ost 0 $dir"
- $LFS find --size +100K --mdt $mdt_idx $dir 2>&1 | tee $tmp
- [ -z "$(cat $tmp | grep "obd_uuid: ")" ] ||
+ $LFS find --size +100K --mdt $mdt_idx $dir |& tee $tmp
+ ! grep -q obd_uuid $tmp ||
error "failed to find --size +100K --mdt $mdt_idx $dir"
}
run_test 56rb "check lfs find --size --ost/--mdt works"
run_test 74c "ldlm_lock_create error path, (shouldn't LBUG)"
num_inodes() {
+ [ -f /sys/kernel/slab/lustre_inode_cache/shrink ] &&
+ echo 1 > /sys/kernel/slab/lustre_inode_cache/shrink
awk '/lustre_inode_cache/ {print $2; exit}' /proc/slabinfo
}
}
run_test 81b "OST should return -ENOSPC when retry still fails ======="
-test_82() { # LU-1031
- dd if=/dev/zero of=$DIR/$tfile bs=1M count=10
- local gid1=14091995
- local gid2=16022000
-
- multiop_bg_pause $DIR/$tfile OG${gid1}_g${gid1}c || return 1
- local MULTIPID1=$!
- multiop_bg_pause $DIR/$tfile O_G${gid2}r10g${gid2}c || return 2
- local MULTIPID2=$!
- kill -USR1 $MULTIPID2
- sleep 2
- if [[ `ps h -o comm -p $MULTIPID2` == "" ]]; then
- error "First grouplock does not block second one"
- else
- echo "Second grouplock blocks first one"
- fi
- kill -USR1 $MULTIPID1
- wait $MULTIPID1
- wait $MULTIPID2
-}
-run_test 82 "Basic grouplock test"
-
test_99() {
[ -z "$(which cvs 2>/dev/null)" ] && skip_env "could not find cvs"
[ -z "$fid" ] && error "path2fid unable to get $tf FID"
# check that we get the same pathname back
- local found=$($LFS fid2path $MOUNT "$fid")
- [ -z "$found" ] && error "fid2path unable to get '$fid' path"
- [ "$found" == "$tf" ] ||
- error "fid2path($fid=path2fid($tf)) = $found != $tf"
+ local rootpath
+ local found
+ for rootpath in "$MOUNT" "$MOUNT///" "$MOUNT/$tfile"; do
+ echo "$rootpath $fid"
+ found=$($LFS fid2path $rootpath "$fid")
+ [ -z "$found" ] && error "fid2path unable to get '$fid' path"
+ [ "$found" == "$tf" ] || error "fid2path $found != $tf"
+ done
+
+ # check wrong root path format
+ rootpath=$MOUNT"_wrong"
+ found=$($LFS fid2path $rootpath "$fid")
+ [ -z "$found" ] || error "should fail ($rootpath != $MOUNT)"
}
run_test 154A "lfs path2fid and fid2path basic checks"
local cmpn_arg=$(cmp -n 2>&1 | grep "invalid option")
[ -n "$cmpn_arg" ] && skip_env "cmp does not support -n"
check_swap_layouts_support
+ check_swap_layout_no_dom $DIR
local dir0=$DIR/$tdir/$testnum
mkdir -p $dir0 || error "creating dir $dir0"
test_184d() {
check_swap_layouts_support
+ check_swap_layout_no_dom $DIR
[ -z "$(which getfattr 2>/dev/null)" ] &&
skip_env "no getfattr command"
[[ $MDS1_VERSION -ge $(version_code 2.6.94) ]] ||
skip "Need MDS version at least 2.6.94"
check_swap_layouts_support
+ check_swap_layout_no_dom $DIR
[ -z "$(which getfattr 2>/dev/null)" ] &&
skip_env "no getfattr command"
}
run_test 205b "Verify job stats jobid and output format"
+# LU-13733
+test_205c() {
+ $LCTL set_param llite.*.stats=0
+ dd if=/dev/zero of=$DIR/$tfile.1 bs=4k count=1
+ $LCTL get_param llite.*.stats
+ $LCTL get_param llite.*.stats | grep \
+ "write_bytes *1 samples \[bytes\] 4096 4096 4096 16777216" ||
+ error "wrong client stats format found"
+}
+run_test 205c "Verify client stats format"
+
# LU-1480, LU-1773 and LU-1657
test_206() {
mkdir -p $DIR/$tdir
sync; sleep 5; sync;
echo 3 > /proc/sys/vm/drop_caches
+ [ -f /sys/kernel/slab/ptlrpc_cache/shrink ] &&
+ echo 1 > /sys/kernel/slab/ptlrpc_cache/shrink
req_before=$(awk '/ptlrpc_cache / { print $2 }' /proc/slabinfo)
# open/close 500 times
done
echo 3 > /proc/sys/vm/drop_caches
+ [ -f /sys/kernel/slab/ptlrpc_cache/shrink ] &&
+ echo 1 > /sys/kernel/slab/ptlrpc_cache/shrink
req_after=$(awk '/ptlrpc_cache / { print $2 }' /proc/slabinfo)
echo "before: $req_before, after: $req_after"
skip "Need MDS version at least 2.13.52"
local mdts=$(comma_list $(mdts_nodes))
+ local timeout=100
local restripe_status
local delta
local i
local j
+ [[ $(facet_fstype mds1) == zfs ]] && timeout=300
+
# in case "crush" hash type is not set
do_nodes $mdts "$LCTL set_param lod.*.mdt_hash=crush"
$LFS setdirstripe -c $i $DIR/$tdir ||
error "split -c $i $tdir failed"
wait_update $HOSTNAME \
- "$LFS getdirstripe -H $DIR/$tdir" "crush" 100 ||
+ "$LFS getdirstripe -H $DIR/$tdir" "crush" $timeout ||
error "dir split not finished"
delta=$(do_nodes $mdts "lctl get_param -n mdt.*MDT*.md_stats" |
awk '/migrate/ {sum += $2} END { print sum }')
skip "Need MDS version at least 2.13.52"
local mdts=$(comma_list $(mdts_nodes))
+ local timeout=100
local restripe_status
local delta
local i
local j
+ [[ $(facet_fstype mds1) == zfs ]] && timeout=300
+
do_nodes $mdts "$LCTL set_param lod.*.mdt_hash=crush"
restripe_status=$(do_facet mds1 $LCTL get_param -n \
error "split -c $i $tdir failed"
[ $i -eq 1 ] && mdt_hash="none"
wait_update $HOSTNAME \
- "$LFS getdirstripe -H $DIR/$tdir" $mdt_hash 100 ||
+ "$LFS getdirstripe -H $DIR/$tdir" $mdt_hash $timeout ||
error "dir merge not finished"
delta=$(do_nodes $mdts "lctl get_param -n mdt.*MDT*.md_stats" |
awk '/migrate/ {sum += $2} END { print sum }')
$LFS fid2path $submount $fid && error "fid2path should fail"
cleanup_247 $submount
}
-run_test 247c "running fid2path outside root"
+run_test 247c "running fid2path outside subdirectory root"
test_247d() {
lctl get_param -n mdc.$FSNAME-MDT0000*.import | grep -q subtree ||
FILESET="$FILESET/$tdir" mount_client $submount ||
error "mount $submount failed"
trap "cleanup_247 $submount" EXIT
- local fid=$($LFS path2fid $submount/dir1)
- $LFS fid2path $submount $fid || error "fid2path should succeed"
+
+ local td=$submount/dir1
+ local fid=$($LFS path2fid $td)
+ [ -z "$fid" ] && error "path2fid unable to get $td FID"
+
+ # check that we get the same pathname back
+ local rootpath
+ local found
+ for rootpath in "$submount" "$submount///" "$submount/dir1"; do
+ echo "$rootpath $fid"
+ found=$($LFS fid2path $rootpath "$fid")
+ [ -n "found" ] || error "fid2path should succeed"
+ [ "$found" == "$td" ] || error "fid2path $found != $td"
+ done
+ # check wrong root path format
+ rootpath=$submount"_wrong"
+ found=$($LFS fid2path $rootpath "$fid")
+ [ -z "$found" ] || error "fid2path should fail ($rootpath != $submount)"
+
cleanup_247 $submount
}
-run_test 247d "running fid2path inside root"
+run_test 247d "running fid2path inside subdirectory root"
# LU-8037
test_247e() {
--filename=$DIR/$tfile
[ $? -eq 0 ] || error "fio mixed read write error"
+ echo "AIO with large block size ${size}M"
+ fio --name=rand-rw --rw=randrw --bs=${size}M --direct=1 \
+ --numjobs=1 --fallocate=none --ioengine=libaio \
+ --iodepth=16 --allow_file_create=0 --size=${size}M \
+ --filename=$DIR/$tfile
+ [ $? -eq 0 ] || error "fio large block size failed"
+
rm -rf $DIR/$tfile
$LCTL set_param debug="$saved_debug"
}
run_test 398c "run fio to test AIO"
+test_398d() { # LU-13846
+ test -f aiocp || skip_env "no aiocp installed"
+ local aio_file=$DIR/aio_file
+
+ $LFS setstripe -c -1 -S 1M $DIR/$tfile $aio_file
+
+ dd if=/dev/urandom of=$DIR/$tfile bs=1M count=64
+ aiocp -a $PAGE_SIZE -b 64M -s 64M -f O_DIRECT $DIR/$tfile $aio_file
+
+ diff $DIR/$tfile $aio_file || "file diff after aiocp"
+ rm -rf $DIR/$tfile $aio_file
+}
+run_test 398d "run aiocp to verify block size > stripe size"
+
test_fake_rw() {
local read_write=$1
if [ "$read_write" = "write" ]; then
skip "Layout swap lock is not supported"
check_swap_layouts_support
+ check_swap_layout_no_dom $DIR
test_mkdir $DIR/$tdir
swap_lock_test -d $DIR/$tdir ||
git://git.whamcloud.com / fs / lustre-release.git / blobdiff